Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
EMC Re
ecoverPoint Re
elease 4
4.1
Sim
mulatorr Techniical Nottes
Rev A01
July 28, 2
2014
Revision History
Revision History
Table 1 shows the revision history of this document.
Table 1. Revision history
Revision
Date
Description
A01
Initial release.
Introduction
Scope of document
This document provides the necessary information to install and run the
4. 1 Simulator on your PC or laptop. Please refer to the RecoverPoint
Administration Guide for more detailed information relating to the
features, functionality and configuration.
Intended audience
The following documents are available for download from EMC Online
Support and can be used as reference.
EMC RecoverPoint Release Notes
EMC RecoverPoint Simulator Technical Notes
Pre-requisites
EMC RecoverPoint Installation and Deployment Product Guide
EMC RecoverPoint Deployment Manager Release Notes
EMC RecoverPoint Administration Guide
Pre-requisites
The RecoverPoint Simulator can be downloaded as a single zip file from
the EMC Online Support website from the RecoverPoint Support Tools
location. These files contain a pre-built VMware virtual machine running
the RecoverPoint 4. 1 (d.210) code.
Before you begin, ensure you have the following:
Note: EMC cannot guarantee the simulator will work on all combinations of
operating system, VMware software and browser.
Appendix A Exceptions
Appendix A Exceptions
The following exceptions apply to RecoverPoint when using the
simulator:
1. Windows platform support is x86 or x64 only.
2. The simulator is not supported using an ESX/ESXi server.
3. boxmgmt is not supported.
4. Some bugs may exist in this version that will not be remedied
until the next release of the simulator.
Appendix B Troubleshooting
Appendix B Troubleshooting
Use this section to troubleshoot simulator issues.
Unabletoconnectto
simulator(Servererrorupon
loggingin)
Thedefaultconfigurationis
HOSTONLYifyouareusing
aVPNthenyoumustshutit
downorthesimulatorwont
work.
Unabletorestartsimulator
whencomputercomesback
a.ShutdowntheVMwareimagebefore
yourcomputerenterssleepmode.
fromSleepmode
computerenterssleepmode.
b.Afteryourestarttheimage,waitfor
30secondsto1minutebeforeyoulog
intotheadminconsole.
c.Theconsistencygroupsmighttake
another30secto1minutetoreinitialize
aftertheGUIlaunches.
Simulatordoesnotworkwhen
connectedtoahomewireless
LAN
YourhomeLANmaybegivingyouan
IPaddressthatconflictswiththe
simulatorsubnetof192.168.x.x.Adjust
yourhomeLANasrequired.
Appendix B Troubleshooting