Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Field 1:
Field 2:
Field 3:
Field 4:
Not used.
Fields 5 to 7:
Field 1:
Not used.
Field 2:
Field 3:
Not used.
Fields 1- N:
The display sequence is converted into point connections each connecting 2 points. Zero entries in the display sequence
indicates a 'pen up' position and hence no connection is created.
Example:
12305671
becomes:
Trace link 1 connecting points 1 and 2
Trace link 2 connecting points 2 and 3
Trace link 3 connecting points 5 and 6
Trace link 4 connecting points 6 and 7
Trace link 5 connecting points 7 and 1
The connection numbers are automatically determined by the interface program. A connection is created if between two
consecutive entries, none is zero.
Field 1:
Field 2:
Field 3:
Data characteristics.
2: 3 DOF global translation vector (NDV=3)
3: 6 DOF global translation and rotation vector (NDV=6)
Field 4:
0: undefined
8: displacements
11: velocity
12: acceleration
Field 5:
Field 6:
Notes
- If the Data Type in Field 5 Is complex, then the Analysis Type is considered to be complex eigenmodes, even if it is defined as
normal modes.
- If Response type is undefined (field 4), and Analysis type = 5 (Field 2), then the translator assume operational shapes are
displacements. In addition, a warning is displayed that an undefined response type was detected.
- The mode shapes are read in sequential order, which determines the mode number. The total number of modes is equal to the number
of appearances of dataset 55.
Field 1:
Field 2:
Field 3:
Not used.
Field 4:
Fields 5 to 8:
Not used.
Record 8 (6E13.5)
Field 1:
Frequency (Hz)
Field 2:
Field 3:
Field 4:
Fields 5 to 6:
Not used.
Record 9 (I10)
Field 1:
Record 10 (6E13.5)
Fields 1 - 3:
Field 1:
Field 2:
Field 3:
Not used.
Field 4:
Fields 5 to 8:
Not used.
Record 8 (6E13.5)
Field 1:
R1
Field 2:
R2
Field 3:
Field 4:
Field 5:
Field 6:
Record 9 (I10)
Field 1:
Record 10 (6E13.5)
Fields 1 - 6: