Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
http://plc.myforum.ro/modbus-communication-wi...
plc.myforum.ro
PLCs users www.plc.myforum.ro!
FAQ
Profile
Search
Memberlist
Usergroups
Register
Log in
Message
Posted: 17/04/2014 19:19
I have a M238 PLC and Magelis HMIS5T connected by the RS-485 port and SoMachine protocol.
I can visualize the PLC variables by Magelis Ethernet port and Modbus TCP protocol from a SCADA?
Joined: 14 Apr 2014
Posts: 3
Back to top
kaka
Junior 2
Martin_2287 wrote:
Joined: 16 Mar 2014
Posts: 46
I have a M238 PLC and Magelis HMIS5T connected by the RS-485 port and SoMachine protocol.
I can visualize the PLC variables by Magelis Ethernet port and Modbus TCP protocol from a SCADA?
I have SoMachine 3.1.10.1 and Vijeo Designer V6.1.0.393.
thanks
regards
2) From CoDeSys, use a ADD Function block to add input1 and input2. The result will be stored in input3
1 de 7
12-02-2015 09:28
http://plc.myforum.ro/modbus-communication-wi...
4) Open up the Vijeo Designer editor from SoMachine and link the variables from the CoDeSys application
2 de 7
12-02-2015 09:28
http://plc.myforum.ro/modbus-communication-wi...
6) From Vijeo Designer, check to see the variables were added successfully.
3 de 7
12-02-2015 09:28
http://plc.myforum.ro/modbus-communication-wi...
7) From Vijeo Designer, create a Modbus TCP/IP slave driver which will be used to communicate to Vijeo Citect. Vijeo Citect (Master) will be resquesting the data from the XBTGC (Slave).
8) From Vijeo Designer create 3 new integer variables (INT datatype) and set the Scan Group to the Modbus TCPIP slave driver (ModbusSlaveTCPIP01)
4 de 7
12-02-2015 09:28
http://plc.myforum.ro/modbus-communication-wi...
9) From Vijeo Designer we need to copy the data from SOM_XBTGC2230 Scan Group (CoDeSys) to ModbusSlaveTCPIP01 Scan Group.(Vijeo Citect). We will also use a Conditional Script Event.
Anytime "Application_POU_inputx" variable changes value (On Data Change), INT0x (Vijeo Citect) will be updated.
5 de 7
12-02-2015 09:28
http://plc.myforum.ro/modbus-communication-wi...
12
6 de 7
12-02-2015 09:28
http://plc.myforum.ro/modbus-communication-wi...
Back to top
Martin_2287
Junior
Post subject:
regards
Back to top
Martin_2287
Junior
Post subject:
Is can be added an Ethernet port to the M238 to communicate a SCADA via Modbus TCP / IP protocol?
Joined: 14 Apr 2014
Posts: 3
Back to top
AdBot
Robotelul cu reclame
Ce este AdBot ?
Click aici
Back to top
Display posts from previous: All Posts
Oldest First
Go
All times are GMT + 2 Hours
Go
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
7 de 7
12-02-2015 09:28