Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
,Ltd
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
of drilling fluid after the loss of water. It is widely used in all the big oil fields, oil fields
exploration and analysis as well as measurement of drilling fluid in the laboratory. It has the
characters of simple operation, convenient use, good stability and small repetitive error in water
loss measure.
This API filter press is a filter press with differential pressure of 0.69MPa. It can be used to
measure the filter loss of drilling fluids and prepare the mud cake formed after filtration. The
instrument has been widely applied in the oil fields, geological exploration department and
laboratory for analysis and measurements of drilling fluids.
2. Models
Models and specifications
specifications
number
Model
Name
Attachments
ZNS-5A
SD6A
Multi-unit
intermediate
pressure
filter
press
Name
Technical Parameter
45.6cm
Working Pressure
0.69MPa(100PSI)
350ml/unit
Filter loss area:45.6cm2 Working pressure:0.69MPa filter time:30min Configuration:long six link
round six link Overall size:1480200500 article name:six link water loss apparatus
Specifications & size:SD6A Filter loss area:45.6cm2 Working pressure:0.69MPa filter time:30min
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
of cement mud.
filter cake thickness within 30 minutes. The temperature scope: from room temperature to 150
Max working pressure in drilling fluid room 7.1MPafilter loss differential 3.5MPa Filter
loss area: 22.6cm2colleted dynamic water loss and fromed filter cake thicknes within 30 minutes.
Two layers mesh screen can satisfy the measurement for cement slurry.
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
Specifications GJ-3S
Technical parameters Power supply 220V5% 50Hz Eletric machine efficency 180W Free running
speed 4000-11000 r/min Mixing volume 500ml Overall size 280220430
Purpose & characters Type GJ-3S machine is special-purpose experimental equippment in petrolium
exploration and drilling field. It consists of principal machine and power supply speed regulator.
Electrical motor adopts direct current series motor and have the characteristics of small volume,
high speed, small noise, easy maintenance and repair. The numbers on the panel of power supply
GJ-3S high speed agitator(mixer)
(Agitator/stirrer/mixer/blender)
GJ-B12K series of variable frequency high-speed agitator is used for oil, exploration, chemical,
and other specialized laboratory equipment. Is mainly used for high-speed mixing a variety of
drilling fluids used in oil drilling, chemical reagent and so on. Is the ideal high-speed mixing
equipment.
The series agitators have GJD-B12K, GJS-B12K-type. Using advanced frequency conversion technology
and microcomputer technology. On a regular basis, constant speed, single axis and multi-axis
operation and other functions at the same time. Mixing blades with API standard production. Simple
operation, large starting torque, stable speed, low noise and so on.
2. size
NO TYPE NAME CONFIGURATION
1 GJD-B12K SINGLE AGITATOR SINGLE AXISSINGLE CUP
2 GJS-B12K DOUBLE AGITATOR DOUBLE AXISDOUBLE CUPS
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
has teh characters of accurate measure, direct reading, reasonable structure, robustness, and
standing wear.
Specifications: ZNN-D6
viscometer
Technical parameter: Measuring range: newtonian fluid 1-300mPaS non-newtonian fluid 1-150mPaS
Shearing stress0-153.3Pa Electric machine efficiency7.5W/15W Power220V10% 50Hz Rotary
speed36100200300600r/min Overall size29017041
Purpose & characteristics
The apparatus can measure all kinds of rheological parameter, draw flow curve according to the
six speed rotational viscometer
multipoint measure data, determine the flow pattern of liquid during flow behavior, choose the
proper formula and take the comparatively accurate measurement for non-newtonian fluid. It has
the characters of simple operation and high accuracy. It applies to visicosity measurement of
drilling fluid in all the big oil fields, sicentific research institutions and laboratories and
it also applies to geology, chemical industry, coal, wine making and etc.
ZNN-D12 rotary viscometer is one of the main kinds of mud analyzer .it can be used to measure
any kinds of rheological parameters ,and according to the flow curve definite rheological
behaviors of the liquid .its a sort of indispensable testing instruments in the modern drilling .
It can be used to measure :
1.
2.
plastic fluid : plastic viscosity ,yield point, apparent viscosity and gel strength .
3.
pseudoplastic fluid (most of the industry fluids) :flow behavior index n and consistency
index k .
2.Basic
2.Basic parameters of the instrument
Scope of the viscosity measurement :
For Newtonian fluid : 0-300mpa.s
For non-Newtonian fluid:0-150mpa.s
shear stress : 0-153.3pa
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
1.power section : high quality stepper motor and electronic components are adopted to down the
noisy and trouble.
2.gearshift section : twelve speeds
Velocity 1.2.3.6.30.60.90.100.180.200.300.600r/m
3. Measuring section
Its consist of torsion spring subassembly ,dial subassembly ,outer and inner cylinders .the
inner cylinder is taper fitted to shaft .the outer is threaded connection .
everyday and has been widely used in petroleum, geology and other departemtns.
size:50060120
Purpose & charactersThe
product is special purpose apparatus for measuring density of drilling
characters
Liquid densimeter
fluid and other liquid matter. It is also applicable to teh measurement of liquid density in all
the big oil fields, scientific research institutions and laboratories. It has teh characters of
data stablization and high accuracy.
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
Specifications:
YYM
Specifications:
Technical parameters
Measuring range 0.90-3.1g/cm3(7.5-26lb/gal) Measuring Accuracy
parameters
0.01g/cm3 Overall size55080150
Liquid pressure densimeter
situation. Measured shearing force and final shearing force have significance to drilling and guard
aperture.
Specifications ZN-
Technical parameters
Measuring range 0-27mm Distinguishability 0.01mm Accuracy 0.03mm
parameters
Repeating error 0.02mm Overall size 400300650
Purpose & characters
This intellecturalized automatic measuring apparatus is used to measure
characters
all the parameter about filter cake that forms after the drilling fluid lossess the water. The
parameters include gross thickness of filter cake, real thickness, compressureion ratio, tenacity
and strength.
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
Specifications ZNP-1
Technical parameters
Measuring cylinder capacity 24ml Measuring error 0.01mm Overall size
parameters
400180420
Purpose & characters
ZNP-1 type swelling capacity is mainly used to check and measure swelling
characters
Swelling capacity measuring
apparatus
change of mud shale in the condition of normal temperature and pressureure, then appraise the
rejection characteristic of all kinds of treating compound to mud shale.
Specifications
Specifications HTP-1
Technical parameters
parameters Power supply 220V5% 50Hz Working temperature 120 Working pressure
3.5MPa Measuring range 15mmDistinguishability 0.01mm Combined Measuring error 0.05mm
Overall size 450350800
Purpose & characters
HTHP shale dilatometer is used to measure the expanding property of shale
characters
in the simulant downhole conditions that the temperature is under 120 and differential pressure
HTHP shale dilatometer
is 3.5MPa. It provides a kind of advanced measuring method for researching the stability of borehole
face, evaluating and choosing the good drilling-fluid formula that can prevent excessive
penetration. At the same time, it can also be used to analyze the function of all kinds of distention
inhibiting agent and optimizing the additive concentration.
Specifications SSH-1
Technical parameters
parameters Working pressure 0.07MPa Slurry cup size 7886 Mesh of filter screen
200 mesh325 mesh Filter loss area 45.8mm2 Overall size 190190300
Purpose & characters
characters The principle of SSH-1 type wet sieving apparatus is following. Bring
pressure to bear on the water, through the injecting nozzle wet sieving the drilling fluid and
bononian stone that need measuring on the filter screen within the limited time. Determine the
slit content of drilling fluid and bononian stone, get the screen tailings percent. The instrument
has the characters of easy operation and convenient maintenance.
Specifications
Specifications ZNH-1
Technical parameters
Filter screen200 mesh Measuring cylinder capacity
parameters
200ml Overall
size 26012080
Mud silt content measuring
instrument
Purpose & charactersThe instrument is used to measure the slit content in drilling mud. Separate
the slit by the water from the drilling fluid, collect
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
Specifications ZNG-1
Technical parameters
parameters Cup capacity 200.1ml Heating efficiency 100W Recovery precision
accuracy 2% Overall size 220120280
Purpose & characters
Mud solid phase content measuring instrument is specially used to measure
characters
Mud solid phase content measuring
instrument (retort kit-20ml)
the solid phase content in drilling fluid and has the characters of directness, rapidness and
accuracy.
1. Description
Solid Phase Content Analyzer is used to separate and determine the content of water, oil and solid
of water-based drilling fluid. It adopts the externally heated distilling pattern with a large
matrass. Oil and water is separated and condensed into the measuring cylinder when a fix quantity
of 50ml drilling subjects to high temperature. The quality or percent bulk of oil, water and solid
can be calculated. Compared with normal (20ml) pattern, the test precision is enhanced because
the adoption of large content externally heated pattern and avoid the danger of overheated. It
can be operated easily and used both in lab and site to learn about the solid concentration. The
character is simple structure and easy operation and is a ideal special instrument.
2.Model and specification
ZNG-1
3. The main technical parameters of the apparatus
Retort kit (50ml)
Sequence number
Name
Technical specifications
220V 50Hz
P o w e r s u pp l y
Power
600W
Volume of retort
500.2ml
Insulated resistance
>98%
>110M
B container. 1) Model ZNG.2) Model ZNS-2.3) Model YM. 4) Model ZNH-15) Model MLN-4
Purpose & characters The instrument applies to well drilling fields with the
characters of easy carrying and operation. It is a set of comprehensive instruments for
measuring many functions of slurry.
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
Specifications QD-2
Technical parameters
parameters Feed cylinder capacity 4000ml Air supplyAzote Working pressure 7.1MPa
Depth 0-77mm Overall size 4604601050
Purpose & characters
characters It is used to appraise teh material, which is used to rebuild circulation.
Determine the leakage stoppage ability of material to the filter loss layer in order to choose
Lost circulation material test
device
the proper lost circulation material. Determine the leakage stoppage efficiency and volume of lost
circulation before the formation of lost circulation.
Specifications GRL3
no
name
specification
Power supply
220V5%
motor
120W
Heating power
50Hz
500W
0~300
Roller speed
50r/min,
0.16 m/s,
Working volume
300260210mm
10
Overall dimension
520460400mm
Technical parameters
Working temperature 50-300 Roller rotation speed 1125r/min
parameters
Heating efficiency 500W Working area 300250220mm Overall size 660334270mm
Purpose & characters
characters
ters The temperature control part of heating furnace adopts the digital electric
regulator. Display accuracy of digital LED is high. The temperature can be set directly. It is
easy to operate and carry for its small volume. It can be used to research into the basic ion exchange
reaction (Ga + disposed slurry) in the newly prepared slurry and determine the stability of adjuvant
in slurry (such as all kinds of thinner and organic glue). It can also be used to mix the chemical
medicine, liquid and powder substance and remove the gas from the liquid.
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
name
specification
Power supply
220V5% 50Hz
motor
180W
Heating power
1000W
50~300
Roller speed
50r/min
0.16 m/s
Working volume
570360390mm
10
Overall dimension
690730550mm
ion exchange reaction (Ga + disposed slurry) in the newly prepared slurry and determine the
stability of adjuvant in slurry (such as all kinds of thinner and organic glue). It can also be
used as dry box, aging oven and ball grinding mill. It can be used to mix the chemical medicine,
liquid and powder substance and remove the gas from the liquid.
GRL-7 roller oven specification
no
specification
Power supply
220V5% 50Hz ,
motor
370W
name
Heating power
1000W
0
~300
Roller speed
50r/min,
0.16 m/s,
Working volume
10
Overall dimension
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
name
specification
Power supply
220V5%
motor
370W
Heating power
50Hz
700W2
0~300
Roller speed
50r/min,
0.16 m/s,
Working volume
555355630mm
10
Overall dimension
700820685mm
Aging cell
High Temperature Aging Cells are designed for testing fluids at temperatures as high as 500 F.
The 500ml are provided for greater volumes of fluid to be tested as higher temperatures, with
sufficient space for expansion as a safety factor.
Some cells include a valve and pressure connection for pre-pressuring the cell before heating.
The connection to the pressure source is made in the same manner as that used on the HPHT filter
presses so that standard nitrogen or CO2 manifolds can be used for this purpose.
Specifications PM10
Technical parametersMaxium
working pressure 10000kg
parameters
Purpose & characters
It is mainly used with HTHP dilatometer manufactured by our plant. It can
characters
also be used to press the other sample. The structure is compact and durable.
Pressing machine
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
1. Summary
The Model DWY-2 Electrical Stability Tester is a kind of instrument used mainly to measure
the relative stability of water in oil (w/o) emulsion. In addition, the electrical resistance caused
by impurity present in electrolytic solution and the stability to time can be predicted from the
measurements of the relative emulsion stability. This instrument also can be used to evaluate the
oil base drilling fluids, oil base releasing stuck agent, cement and crack water etc. Therefore,
it can be extensively applied in petroleum, metallurgy, drilling crew and research institutions,
etc.
2. Model and specification
Model: DWY-2
3. The main technical parameters of apparatus
Electrical Stability Tester
Sequence number
Name
Technical specification
Power supply
AC220V5%, 50Hz
Output voltage
0~2000V, 340Hz
Distance of electrodes
1.59mm(0.061in)
Power
750W
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
cake thickness during the test, the Bulk Sticking Coefficient is obtained. The Bulk Sticking
Coefficient is determined by the Fixed Cake Thickness Test.
2
The unit can be pressurized by the CO regulator assembly or from any nitrogen source. If Nitrogen
is to be used, the Differential Sticking Tester must be fitted with a suitable Nitrogen regulator,
gauges, relief valve, hose and fittings.
EP and Lubricity Tester
When there is relative motion between two contacting bodies, frictional forces that resist motion
always come into play. Frictional resistance to
to rotation of the drill string is called torque,
and is especially enhanced when drilling a deviated hole. Many different materials, such as
graphite, fine mica, and diesel or crude oil, have been used as mud additives to improve lubricity.
Since evaluation
evaluation of the various materials cannot realistically be done on the drilling rig, a
lubricity test was designed to simulate the speed of rotation of the drill pipe and the pressure
with which the pipe bears against the wall of the hole. combination EP and Lubricity
Lubricity tester is
a highhigh-quality instrument used to measure the lubricating quality of drilling fluids, provide
data to evaluate the type and quantity of lubricating additives that may be required, and predict
wear rates of mechanical parts in known fluid systems.
systems. The test consists of measuring the torque
of a steel block while being pressed against a rotating steel ring. The torque limit is 600
inchinch-pounds. Test rings and blocks for both tests are available
Lubricity Tester
EP (Extreme Pressure Test)
This test produces an indication
indication of the film strength of the fluid being tested by applying a
measured force to a torquetorque-sensitive bearing cup with the torque arm. The EP test is typically
run at a high shear rate, 1,000 RPM, with fluid pressures ranging from 5,000 to 100,000 PSI between
the steel surfaces.
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
Artical name
Low pressure
pipe manifold
Air supply pipe manifold
High pressure
pipe manifold
High pressure
pipe manifold
High pressure
pipe manifold
Size
Input pressure
DG-1
QG-76
QG-80
Output
Air supply
pressure
temperature
Remarks
0-1.6MPa
Maximum working
pressure*1.2-15MPa
QG-80A
0-7.6MPa
-10-+50
0-8.0MPa
Oxygen is strictly
prohibited
0-8.0MPa
Drilling problems such as stuck pipe, tight hole, washout, and sloughing can be related to shale stability.
The Capillary Suction Timer (CST) and the Linear Swell Meter (LSM) help determine if specific shales are
likely to cause drilling and completion problems.
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
The Linear Swell Meter Model 2000 (LSM) helps determine shale hydration or dehydration by measuring
the increase or decrease in length over time of reconstituted or intact shale core. Together the LSM and
Capillary Suction Time (CST) tests determine the recommended mud system for drilling through a specific
shale formation. First, a CST test is conducted to determine the correct inhibitor for the shale. Then, a
variety of fluids are tested.
Test results are graphed to show the percent of swelling versus swelling time in minutes. The LSM test
demonstrates the inhibitive effects of these various fluids on shale swelling.
Dynamic Linear Swell Meter
Investigating the swelling characteristics of shale formations is vital in selecting a proper drilling fluid to
give maximum inhibition and wellbore stability. While drilling a well, a shale formation will immediately
begin to swell if the drilling fluid is not completely compatible with the formation. This swelling can cause
many problems, such as bit balling, pipe drag, hole sloughing, or other "gumbo" related problems.
Therefore, selecting the proper drilling fluid prior to, or during the drilling operation, can be very beneficial
in achieving a stable wellbore.
The Linear Swell Meter is designed to simultaneously test up to four drilling fluids (expandable to eight) on
a representative shale sample for extended periods of time at temperatures up to 180F.
Most swell meters are designed to test shale samples in static fluid. However, fluids circulate as you drill,
so testing shale samples in a static environment does not always provide accurate readings.
The Linear Swell Meter is the only swell meter on the market capable of dynamically testing your fluids, so
you obtain the most accurate data possible.
The Permeability Plugging Apparatus (PPA) is designed to provide accurate simulation and measurement
of down-hole static filtration. This 5,000 psig rated PPA is ideal for predicting how a drilling fluid can form a
permeable filter cake to seal off depleted/under pressure intervals. The PPA utilizes a conventional HTHP
Heating Jacket to simulate reservoir temperature. The fluid cell is inverted, with pressure applied from the
bottom of the cell and filtrate collected out the top. Pressure is transferred to the mud by a small hydraulic
hand pump through a small floating piston within the cell. The PPA employs a ceramic filter disc, which is
available in varying porosities. The disc offers a more authentic representation of the formation.
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
k = (2,000 x OP x Q x x L) / (A x (IP - OP ))
Where:
The Permeameter is utilized to measure the permeability of cement or core specimens one inch in
diameter and one inch in length. The specimen is placed into a sleeve, which is then inserted into the
"Modified Hassler" style test cell. Nitrogen at a constant flow rate is forced through the core and the
differential pressure across the core is measured. The flowrate is measured with calibrated flowmeters.
Viscosity is easily determined by the use of nitrogen property tables. These variables are incorporated into
Darcys law to calculate cement sample permeability.
Method of Operation:
A specimen is placed into a core sleeve which is then inserted into the "Modified Hassler" style test cell.
Nitrogen is displaced through the specimen at various flowrates to determine the permeability.
Features and Specifications:
"Modified Hassler" cell accommodates 1" diameter cores
The Model DZL2003 resistivity measuring meter of drilling fluids is the newly developed instrument. It is
mainly used to measure resistivity or conductivity of various fluids. It can also be applied to measure resisitivity of
oil field drilling fluids and various liquids in other industries, and analyze liquid mineralization or provide reference
for distinguishing water purity. The instrument is ideal liquid resistivity measuring apparatus and can be widely
used to such departments as petroleum, geology, drilling team and laboratory.
Resistivity Meter
Function
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
DZL2003
Sequence
Name
Technical Parameters
Power supply
AC220V10%501 Hz
number
1
2
Working
environment
temperature
4
Measuring range
30 hours
1050
0.2100m
2.05.0mvariable range in 3%
Measuring uncertainty
Others in 5%
6
Setting of standard
temperature
Compensation of
auto-temperature
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
The Model ZXP-30L Mud Preparing Apparatus is an instrument used to mix various fluids. It is
mainly used to prepare drilling fluids in petroleum exploration and other fluids. It has been widely
used in the fields of petroleum, geology and metallurgy, etc.
2. Model and specification
Model: ZXP-30L
3. The main technical parameters of apparatus
Sequence
Name
number
Technical specification
220V, 50Hz
Agitated power
0.37KW
Pump power
0.37KW
Rotational speed
(non-load)
1400r/min
Volume of agitation
30L
1.8m3/h
Outer size
8304301050mm
The Concentration of Sulfides Detection Kit(Garrett gas train test) are used for detection the
concentration of soluble sulfide in drilling fluids . the soluble sulfides include hydrogen
sulfides (H2S),the sulfide (S-2) and the bisulfide(HS-) ion. Utilizing a weak acid in the Garrett
Gas Train,the drilling fluids filtrate liberate H2S gas from the sulfide, and let out with bubbling
an inert gas. The Garrett gas train separates the gas from the liquids, and the gas pass a Draeger
tube that responds to H2S by progressively dardkening along its length as the H2S react with the
reagent. The length of darken is direct ratio with the total concentration of the sulfides in the
filtrate. The low-range Draeger tube is white until H2S turns it brownish-back. The high-range
Draeger tube is pale blue until H2S turns it jet black. No known common drilling fluid component
or contaminant causes this coloration of the Draeger tubes as does H2S.
A hydrogen sulfide test paper disk can be accommodated in the Garrett gas train for routine tests
until evidence of the presence of H2S is noted by discoloration of the hydrogen sulfide test
Concentration of Sulfide Detection
paper,then a Draeger tube should be used for quantitative analysis.
Section 2.Model
Garrett gas train test
Model QTH
Section 3. Equipment and Parameters
Item No.
description
parameters
1
Garret Gas Train chamber 1
Chamber 2
Chamber 3
Diameter 2mm
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
8. Volume: 38*45*65cm
SX-0710B type boost thickening instrument is designed and manufactured in strict accordance with API
standard specification, which is used in oil well cement thickening test under high temperature and pressure.
Main technical parameters
1. Power supply: AC 220V (10 %)50 HZ 4.2kW
2. Air source pressure: 0.3~0.7 Mpa
3. Water source pressure: 0.1-0.4 Mpa
4. Maximum pressure: 275 Mpa, maximum temperature: 315.
5. 20 programs; each program can realize multi-segment program control on temperature and pressure.
6. Temperature control accuracy <1; pressure control accuracy <0.7 Mpa.
7. Automatic pressure control: boost pump, relief pump and temperature controller are combined together.
8. Motor rotation speed: 15015 r/min
HTHP consistometer
Type SX-0720 pressurizing maintenance kettle is designed and manufactured strictly in accordance with
API-10 standard. Under the high temperature and high pressure conditions, it provides maintenance for cement
blocks used for testing strength of oil well cement.
main technical parameters of instrument
1 power supply: AC220V10 %50HZ 5.2W
2air source pressure: 0.30.7Mpa
3Water source: 0.1-0.4Mpa
4Max. operating pressure: 40Mpa, max. operating temperature: 375
5Automatic temperature control by multiple segment procedure.
6Temperature control accuracy: <1
7Pressure control mode: Booster pumps and pressure relief pump are connected with pressure gauge by
pressurizing maintenance kettle
electric contact
8 Maintenance amount: die setting (8 blocks at a time)
Tel:+86-15898857061
Email:xw7061@126.com Web:www.qdsenxin.com
9Volume: 84*74*189cm
10Weight: 300kg
Type SX-0702 normal atmospheric pressure maintenance chamber is designed and manufactured strictly in
accordance with API-10 standard. Under normal atmospheric pressure conditions, it provides maintenance for
cement blocks used for testing strength of oil well cement.
Main technical data
1
SX-0708 Constant-speed Mixer is manufactured in strict accordance with API Standard Specification 10. It
is used for high-speed mixing of cementation cement slurry sample.
Instrument Main Technical Parameters
1Power: AC220V 50HZ 1kW
2Maximum speed: 18000r.p.m
3Digital PID closed loop control, digital display
4Full protection functions for overheating, overflow, overpressure and excessive speed.
5Low-speed gear: 4000r.p.mhigh-speed gear:12000r.p.mspeed regulation gear2000-18000r.p.m
6 Speed control precision <2%
7Slurry cup capacity
CONSTANT-SPEED MIXER
8Volume: 33*15*25cm
SX-0705High-temperature and High-pressure Filtration Instrument is made in strict accordance with API
Standard Specification 10. It is used to measure filtration property of bored well and cemented well slurry at high
temperatures and high pressures.
Instrument Main Technical Specifications
1AC220V 50HZ 1 kW
Power: AC220V 50HZ 1 kW
5Volume: 20*30*65cm