Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
SWIVEL JOINTS
OPW Engineered Systems, part of the OPW Fluid Transfer Group,
provides expert solutions for the safe handling, transfer, monitoring,
measuring and protection of hazardous bulk products worldwide.
ES-SJ-12/04-1M
TABLE OF CONTENTS
Table
of
Design Features . . . . . . . . . . . . . . . . . . . . . . . . . 4
Pressure/Temperature Chart . . . . . . . . . . . . . . . 5
Styles Available Chart . . . . . . . . . . . . . . . . . . . 6
Standard Swivel Joints . . . . . . . . . . . . . . . . . . . .
Style 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Style 20 . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Style 30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Style 34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Style 35 . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Style 40 . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
Style 44 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Style 45 . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Style 50 . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Style 55 . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Style 60 . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Style 70 . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Style 80 . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Contents
Counterbalance Swivel Joints . . . . . . . . . . . . . 13
Style 56 . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Style 58 . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Style 76 . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Style 78 . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Repair Parts
and
Procedures . . . . . . . . . . 19
Dimensions Chart . . . . . . . . . . . . . . . . . . . . . . . 20
Approximate Weights/Specifications . . . . . . . . . 21
Ordering Chart . . . . . . . . . . . . . . . . . . . . . . . . 23
Autolok, Drylok, Twin-Kam, Endura, GFL, Cliplok and Spring Ring are trademarks, and OPW, Visi-Flo, Kamvalok and Kamlok are registered trademarks of OPW Engineered Systems.
Hastelloy is a registered trademark owned by Haynes International, Inc. Viton and Kalrez are registered trademarks of DuPont Dow Elastomers. Teflon is a registered trademark of DuPont.
Chemraz is a registered trademark of Green Tweed. Scully and BICLOPS are registered trademarks of Scully Signal Co.
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
v e r v i e w
Overview
OPW Engineered Systems manufactures swivel joints for
a broad range of uses in the chemical, petroleum,
petrochemical, refining, mining, distilling, brewing, ink and
paint industries, as well as farm irrigation and fertilizing.
Design, plant and maintenance engineers use OPW swivels
in flexible piping systems, loading arms, hose reels, sewer
rodding and wastewater treatment equipment, and various
types of process machinery. They also use our swivel joints
in machine tool coolant transfer, drum filling applications,
and in a variety of in-plant fluid and dry bulk transfer
applications.
Proven Experience
For more than 60 years, OPW Engineered Systems has
provided innovative solutions for some of the most
challenging liquid handling applications. We take pride in
our ability to custom design and manufacture swivel joints
for specialized applications. Our engineers will work with
you to determine the right swivel joint for your application.
PHONE: (800) 547-9393 (513) 696-1500 Fax: (800) 245-8536 (513) 932-9845
2726 Henkle Drive Lebanon, OH 45036 www.opw-es.com
3
3
e s i g n
e a t u r e s
Design Features
OPW Engineered Systems fabricated and cast ball bearing swivel
joints allow you to construct a metal piping system that permits easy
movement in any direction. Moveable, flexible and reliable, OPW
Engineered Systems swivels are designed and built to the highest
quality standards, including precision machining and 100%
penetration welding, with special design features that include:
1) Tight Seals
D
ouble raceway design assures proper alignment and prevents
binding caused by temperature changes and heavy radial loads
C
arbon steel swivels have hardened races to maximize
load-carrying capability
4) Long-Life Bearings
Ball bearings are hardened, precision-ground steel
Stainless steel swivels have stainless steel bearings
A
ll OPW swivels are available with stainless steel bearings on
special order
5) Easy Lubrication
All OPW swivels are pre-lubricated at the factory
All 3/4", 1", and submerged swivels are permanently lubricated
A
grease fitting between races that accepts a standard grease gun is
available for swivels that require field lubrication
Non-lubricating swivels are available on special order
Convenience of Choice
Available in a variety of sizes beginning at 3/4" and up
Available in threaded, flanged, and butt welded ends
Steam jacketed and split flange swivels are also available
Cast Stainless Steel, Aluminum,
Ductile Iron, Bronze
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
r e s s u r e
/T
e m p e r a t u r e
Pressure/Temperature Guide
-45.55 C
-50 F
-45.55 C
-50 F
-37.22 C
-35 F
-28.88 C
-20 F
-28.88 C
-20 F
-28.88 C
-20 F
6.894 mpa 1000 psi
(PFA) PTFE/Silicone
Neoprene
Fluorocarbon
EPDM
Lo-Temp Fluorocarbon
Buna-N
70 kg/cm2
PRESSURE PSI
PRESSURE MPa
63kg/cm2
Stainless Steel 3700 & 3900 Series
56 kg/cm2
49 kg/cm2
42 kg/cm2
35 kg/cm2
28 kg/cm2
Bronze 3300 Series
21 kg/cm2
14 kg/cm2
7 kg/cm2
0 psi
-50 F
-45.55 C
0 F
-17.77 C
200 F
93.33 C
100 F
37.77 C
300 F
148.88 C
400 F
204.44 C
500 F
260 C
0 kg/cm2
TEMPERATURE F TEMPERATURE C
3/4"
20mm
Steel, Cast,
High-Pressure
3200 Series
1"
1-1/4"
1-1/2"
25mm
32mm
40mm
Steel, Fabricated
3400 Series
316 Stainless Steel
3700 & 3900 Series
2"
50mm
3"
80mm
4"
6"
100mm
150mm
8"
200mm
10"
250mm
12"
300mm
Pressure
Rating*
3000 psi
210 kg/cm2
20.68 mpa
1000 psi
70 kg/cm2
6.89 mpa
8, 10 &
12 500
psi max
1000 psi
70 kg/cm2
6.89 mpa
Aluminum
3600 Series
Ductile Iron
3800 Series
Bronze
3300 Series
125 psi
9 kg/cm2
0.86 mpa
600 psi
42 kg/cm2
4.13 mpa
300 psi
21 kg/cm2
2.06 mpa
*Maximum pressure rating of OPW swivel joints is as shown, or is determined by the flange/end connection rating, whichever is lower.
Buna-N seals are standard in all of the above swivel joints, but each is available with seals made of Viton, Teflon, EPT, or Neoprene,
depending on the pressures and temperatures of your operation.
PHONE: (800) 547-9393 (513) 696-1500 Fax: (800) 245-8536 (513) 932-9845
2726 Henkle Drive Lebanon, OH 45036 www.opw-es.com
STYLES AVAILABLE
Styles Available
OPW Engineered Systems swivel joints are
available in one, two and three planes of rotation
for virtually unlimited flexibility. Standard
combinations of five different metals and seal
materials cover pressures, temperatures, and
corrosion resistance and load bearing capacities
well within the limits of most application
requirements.
Style 10
3 planes of rotation
Style 20
1 plane of rotation
Style 30
1 plane of rotation
Style 40
1 plane of rotation
Style 50
2 planes of rotation
Style 60
2 planes of rotation
Style 70
2 planes of rotation
Style 80
3 planes of rotation
NOTE: Flanged or butt weld ends are available in many styles and
sizes. Only the most common styles of OPW swivel joints appear
on the following pages. If you dont see exactly what you need,
please contact us.
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
STYLES AVAILABLE
STYLE 20
Thread x Thread
Style 20
Flange x Flange
Style 20F
Material
Model
Size (inches)
3220
3420
3720
3920
3620
3820
3320
1, 1-1/4, 1-1/2, 2
2, 3, 4
3/4, 1, 1-1/2
2, 3, 4
1, 1-1/2, 2, 3, 4
1, 1-1/2, 2, 3, 4
1, 1-1/2, 2, 3
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
Aluminum
3420F
3920F
3620F
2, 3, 4, 6, 8, 10
2, 3, 4, 6, 8, 10
3, 4, 6
Model
Size (inches)
3420W
3920W
2, 3, 4, 6, 8, 10
2, 3, 4, 6, 8, 10
Dimensions
B
s
s
s
s
l
l
l
D1
B
A
Dimensions
s
s
Style 20F
l
s
s
D3
Material
Model
Size (inches)
3230
3430
3730
3930
3630
3830
3330
1, 1-1/4, 1-1/2, 2
2, 3, 4
3/4, 1, 1-1/2
2, 3, 4
1, 1-1/2, 2, 3, 4
1, 1-1/2, 2, 3, 4
1, 1-1/2, 2, 3
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
Aluminum
Ductile Iron
3430F
3930F
3630F
3830F
2, 3, 4, 6, 8, 10
2, 3, 4, 6, 8, 10
3, 4, 6
3, 4
Flange for
Submerged Use
Style 30FJ
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
Aluminum
3430FJ
3930FJ
3630FJ
2, 3, 4, 6, 8, 10
2, 3, 4, 6, 8, 10
3, 4, 6
Flange x Thread
Style 30FO
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
Aluminum
Ductile Iron
3430FO
3930FO
3630FO
3830FO
2, 3, 4
2, 3, 4
3, 4
3, 4
Model
Size (inches)
3430W
3930W
2, 3, 4, 6, 8, 10
2, 3, 4, 6, 8, 10
Flange x Flange
Style 30F
D2
Dimensions
STYLE 30
Thread x Thread
Style 30
Style 20
Style 20W
Dimensions
s
s
s
s
l
l
l
G1
B
Style 30
H2
Dimensions
s
s
l
l
B
A
C2
Dimensions
Style 30F
Style 30FJ
s
s
l
Dimensions
s
s
l
l
H2
G1
B
Style 30FO
H2
Dimensions
G3
A
s
s
H3
Style 30W
Dimensions Chart on page 20: s Steel & Stainless Steel l Aluminum, Ductile Iron & Bronze
PHONE: (800) 547-9393 (513) 696-1500 Fax: (800) 245-8536 (513) 932-9845
2726 Henkle Drive Lebanon, OH 45036 www.opw-es.com
STYLES AVAILABLE
L
G1
STYLE 34
Thread x Thread
Style 34
Flange x Flange
Style 34F
Material
Model
Size (inches)
Dimensions
Steel, Fabricated
3434
2, 3, 4
3934
2, 3, 4
Material
Model
Size (inches)
Steel, Fabricated
3434F
2, 3, 4
3934F
2, 3, 4
Style 34
H1
G2
Dimensions
B
A
STYLE 35
Style 34F
H2
G2
Thread x Thread
Style 35
Flange x Flange
Style 35F
TTMATruck Flanges
Style 35F T
Material
Model
Size (inches)
Dimensions
Steel, Fabricated
3435
2, 3, 4
3935
2, 3, 4
Aluminum
3635
3, 4
Material
Model
Size (inches)
Steel, Fabricated
3435F
2, 3, 4, 6
3935F
2, 3, 4, 6
Material
Model
Size (inches)
Aluminum
3635FT
Aluminum
3635FTH*
Style 35
H1
Dimensions
G2
B
A
Style 35F
H2
Dimensions
A
A
Style 35FT
STYLE 40
Thread x Thread
Style 40
Flange x Flange
Style 40F
Flanged for
Submerged Use
Style 40FJ
Flange x Thread
Style 40FO
Material
Model
Size (inches)
3240
1, 1-1/4, 1-1/2, 2
Steel, Fabricated
3440
2, 3, 4
3740
3/4, 1, 1-1/2
3940
2, 3, 4
Aluminum
3640
1, 1-1/2, 2, 3, 4
Ductile Iron
3840
1, 1-1/2, 2, 3, 4
Bronze
3340
1, 1-1/2, 2, 3
Material
Model
Size (inches)
Steel, Fabricated
3440F
2, 3, 4, 6, 8, 10
3940F
2, 3, 4, 6, 8, 10
Aluminum
3640F
3, 4, 6
Ductile Iron
3840F
3, 4
Material
Model
Size (inches)
Steel, Fabricated
3440FJ
2, 3, 4, 6, 8, 10
3940FJ
2, 3, 4, 6, 8, 10
Aluminum
3640FJ
2, 3, 4, 6
Material
Model
Size (inches)
Steel, Fabricated
3440FO
2, 3, 4
3940FO
2, 3, 4
Aluminum
3640FO
3, 4
Ductile Iron
3840FO
3, 4
G1
G2
G1
Style 40
F
Dimensions
B
G2
G2
A
Dimensions
Style 40F
Style 40FJ
G1
Dimensions
Dimensions Chart on page 20: s Steel & Stainless Steel l Aluminum, Ductile Iron & Bronze
Dimensions
G2
Style 40FO
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
STYLES AVAILABLE
G2
STYLE 40 (CONTINUED)
TTMA Truck Flange
Style 40FT
Style 40FT
Material
Model
Size (inches)
Aluminum
3640FT
3, 4
Model
Size (inches)
Dimensions
l
F
G2
Dimensions
Style 40FTO
Aluminum
3640FTO
3, 4
Material
Model
Size (inches)
Steel, Fabricated
3440W
2, 3, 4, 6, 8, 10
3940W
2, 3, 4, 6, 8, 10
G1
l
A
Dimensions
G2
Style 40FTO
G3
A
F
Style 40W
Flange x Flange
Style 44F
Flange x Thread
Style 44FO
Style 44FT
Material
Model
Size (inches)
Steel, Fabricated
3444
2, 3, 4
3944
2, 3, 4
Aluminum
3644
2, 3, 4
Material
Model
Size (inches)
Steel, Fabricated
3444F
2, 3, 4
3944F
2, 3, 4
Aluminum
3644F
3, 4, 6
Material
Model
Size (inches)
Steel, Fabricated
3444FO
2, 3, 4
3944FO
2, 3, 4
Aluminum
3644FO
3, 4
Material
Model
Size (inches)
Aluminum
3644FT
3, 4
Model
Size (inches)
3644FTO
3, 4
Style 44FTO
Aluminum
Dimensions
G1
Style 44
G1
Dimensions
G2
Style 44F
G3
Dimensions
G2
Style 44FO
G1
Dimensions
l
F
G2
Dimensions
Style 44FT
G1
F
B
G1
STYLE 45
Thread x Thread
Style 45
Flange x Flange
Style 45F
Style 44FTO
G2
Material
Model
Size (inches)
Steel, Fabricated
3445
2, 3, 4
Dimensions
s
3945
2, 3, 4
Aluminum
3645
3, 4
Material
Model
Size (inches)
Steel, Fabricated
3445F
2, 3, 4, 6
3945F
2, 3, 4, 6
B
G1
Style 45
Dimensions
G1
L
F
B
G2
Style 45F
A
G2
Dimensions Chart on page 20: s Steel & Stainless Steel l Aluminum, Ductile Iron & Bronze
PHONE: (800) 547-9393 (513) 696-1500 Fax: (800) 245-8536 (513) 932-9845
2726 Henkle Drive Lebanon, OH 45036 www.opw-es.com
STYLES AVAILABLE
Style 50
STYLE 50
Thread x Thread
Style 50
Flange x Flange
Style 50F
Flange x Thread
Style 50FO
Style 50FT
Style 50W
A
B
F
Material
Model
Size (inches)
3250
3450
3750
3950
3650
3850
1, 1-1/2, 2
2, 3, 4
2, 3, 4
2, 3, 4
1-1/2, 2, 3, 4
2, 3, 4
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
Aluminum
Ductile Iron
3450F
3950F
3650F
3850F
2, 3, 4, 6, 8, 10
2, 3, 4, 6, 8, 10
3, 4
3, 4
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
Aluminum
Ductile Iron
3450FO
3950FO
3650FO
3850FO
2, 3, 4
2, 3, 4
3, 4
3, 4
Material
Model
Size (inches)
Aluminum
3650FT
3, 4
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
3450W
3950W
2, 3, 4, 6, 8, 10
2, 3, 4, 6, 8, 10
Dimensions
H1
s
s
s
s
l
l
G1
A
F
Style 50F
Style 50FT
Dimensions
s
s
l
l
H2
G2
Style 50FO
Dimensions
s
s
l
l
H2
Style 50W
A
G1
Dimensions
H3
Dimensions
G3
s
s
Style 55
B
STYLE 55
Thread x Thread
Style 55
Flange x Flange
Style 55F
Style 55FT
Style 55F
Style 55FT
H1
G2
B
A
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
Aluminum
Ductile Iron
3455
3955
3655
3855
2, 3, 4
2, 3, 4
3, 4
2, 3
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
3455F
3955F
2, 3, 4, 6
2, 3, 4, 6
Model
Size (inches)
Ductile Iron
3455FFT
3855FFT
3, 4
3
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
Aluminum
Ductile Iron
3455FO
3955FO
3655FO
3855FO
2, 3, 4
2, 3, 4
3, 4
3
G1
Material
Model
Size (inches)
Aluminum
3655FT
Model
Size (inches)
3855TFT
Dimensions
s
s
l
l
H2
Dimensions
Style 55FFT
s
s
Style 50FO
Dimensions
s
l
G1
Dimensions
s
s
l
l
Dimensions
Style 55TFT
l
L
Dimensions
l
H1
Dimensions Chart on page 20: s Steel & Stainless Steel l Aluminum, Ductile Iron & Bronze
10
H2
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
H2
STYLES AVAILABLE
STYLE 60
Thread x Thread
Style 60
Flange x Flange
Style 60F
Style 60
Material
Model
Size (inches)
3260
3460
3760
3960
3660
3860
1, 1-1/2, 2
2, 3, 4
1, 1 1/2
2, 3, 4
1-1/2, 2, 3, 4
2, 3, 4
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
Aluminum
Ductile Iron
3460F
3960F
3660F
3860F
2, 3, 4, 6, 8, 10
2, 3, 4, 6, 8, 10
3, 4
3, 4
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
Aluminum
Ductile Iron
3460FO
3960FO
3660FO
3860FO
2, 3, 4
2, 3, 4
3, 4
3, 4
Material
Model
Size (inches)
Ductile Iron
Bronze
3860T
3360T
2
1-1/2, 2
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
3460W
3960W
2, 3, 4, 6, 8, 10
2, 3, 4, 6, 8, 10
Flange x Thread
Style 60FO
Style 60W
B A
Dimensions
H2
s
s
s
s
l
l
Style 60F
Style 60FT
H1
B
A
Dimensions
H2
s
s
l
l
Style 60FO
H1
A
Dimensions
Style 60T
H2
s
s
l
l
A
H1
H2
Dimensions
H1
Style 60W
l
l
H3
Dimensions
s
s
H3
Style 70
B
STYLE 70
Thread x Thread
Style 70
Flange x Flange
Style 70F
Flange x Thread
Style 70FO
Style 70FT
G1
Material
Model
Size (inches)
3270
3470
3770
3970
3670
3870
1, 1-1/2, 2
2, 3, 4
1, 1-1/2
2, 3, 4
1-1/2, 2, 3, 4
2, 3, 4
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
Aluminum
Ductile Iron
3470F
3970F
3670F
3860F
2, 3, 4, 6, 8, 10
2, 3, 4, 6, 8, 10
3, 4
3, 4
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
Aluminum
Ductile Iron
3470FO
3970FO
3670FO
3870FO
2, 3, 4
2, 3, 4
3, 4
3, 4
Material
Model
Size (inches)
Aluminum
3670FT
3, 4
Model
Size (inches)
3670FTO
Style 70FTO
Aluminum
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
3470W
3970W
2, 3, 4, 6, 8, 10
2, 3, 4, 6, 8, 10
Style 70W
Dimensions
s
s
s
B
F
G1
s
s
l
G2
A
Dimensions
s
s
l
l
Style 70F
Style 70FT
G2
Dimensions
G1
A
s
s
l
l
Style 70FO
Style 70FTO
Dimensions
G2
l
F
Dimensions
Dimensions
Style 70W
s
s
Dimensions Chart on page 20: s Steel & Stainless Steel l Aluminum, Ductile Iron & Bronze
PHONE: (800) 547-9393 (513) 696-1500 Fax: (800) 245-8536 (513) 932-9845
2726 Henkle Drive Lebanon, OH 45036 www.opw-es.com
G3
G3
11
STYLES AVAILABLE
STYLE 80
Style 80
H1
Thread x Thread
Style 80
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
3480
3980
2, 3, 4
2, 3, 4
Flange x Flange
Style 80F
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
3480F
3980F
2, 3, 4, 6, 8, 10
2, 3, 4, 6, 8, 10
G1
Dimensions
s
s
Dimensions
AB
Style 80F
s
s
H2
*Flange x thread (Style 80FO) and butt weld x butt weld (Style 80W) units are also available.
G2
F
A
Style 10
STYLE 10
H2
Thread x Thread
Style 10
Flange x Flange
Style 10F
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
3410
3910
2, 3, 4
2, 3, 4
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
3410F
3910F
2, 3, 4, 6, 8, 10
2, 3, 4, 6, 8, 10
Dimensions
s
s
H2
Dimensions
s
s
Style 10F
A
*Flange x thread (Style 10FO) and butt weld x butt weld (Style 10W) units are also available.
H1
H1
Dimensions Chart on page 20: s Steel & Stainless Steel l Aluminum, Ductile Iron & Bronze
12
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
STYLES AVAILABLE
Counterbalance Swivels
OPW Engineered Systems counterbalance swivels for both counterweighted loading
arms (see Style 55 on page 10) and torsion spring-balanced loading arms are
available (Styles 56, 58, 76, and 78) to cover virtually any combination of riser
orientation and swivel offset, including:
Upfeed right hand
Right Hand
Left Hand
Maximum Y-dimensions: 2" size: Y= 8-1/8" (207 mm); 3" size: Y=11" (280 mm);
4" size: Y=12" (324 mm); and 6" size: Y=18" (470 mm).
A
B
Style 56
STYLE 56
H1
Thread x Thread
Style 56 (DFRH, UFLH)
Flange x Flange
Style 56F (DFRH*)
Flange x TTMA Flange
Style 56FFT (DFRH*)
Flange x Thread
Style 56FO (DFRH, UFLH)
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
Ductile Iron
3456
3956
3856
2, 3, 4
2, 3, 4
3, 4
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
3456F
3956F
2, 3, 4, 6
2, 3, 4, 6
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
3456FFT
3956FFT
3, 4
3, 4
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
Ductile Iron
3456FO
3956FO
3856FO
2, 3, 4
2, 3, 4
2, 3, 4
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
3456TFT
3956TFT
3, 4
3, 4
Dimensions
Style 56F
s
s
F
Dimensions
G1
H1
Style 56FFT
F
s
s
H2
Dimensions
s
s
Style 56FO
A
Dimensions
s
s
l
Style 56TFT
B
H2
F
H1
Dimensions
G1
F
s
s
Dimensions Chart on page 20: s Steel & Stainless Steel l Aluminum, Ductile Iron & Bronze
PHONE: (800) 547-9393 (513) 696-1500 Fax: (800) 245-8536 (513) 932-9845
2726 Henkle Drive Lebanon, OH 45036 www.opw-es.com
13
STYLES AVAILABLE
STYLE 58
Thread x Thread
Style 58 (DFRH, UFLH)
Style 58
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
Ductile Iron
3458
3958
3858
2, 3, 4
2, 3, 4
2, 3, 4
Flange x Flange
Style 58F (DFRH*)
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
3458F
3958F
2, 3, 4, 6, 8, 10
2, 3, 4, 6, 8, 10
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
3458FFT
3958FFT
3, 4
3, 4
Flange x Thread
Style 58FO (DFRH, UFLH)
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
Ductile Iron
3458FO
3958FO
3858FO
2, 3, 4
2, 3, 4
3, 4
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
3458TFT
3958TFT
3, 4
3, 4
Dimensions
G1
s
s
l
Style 58F
H1
Dimensions
B
A
s
s
Style 58FFT
F
Dimensions
H2
s
s
Dimensions
s
s
l
Style 58FO
H2
G1
Style 58TFT
Dimensions
s
s
H2
H1
STYLE 76
Flange x Flange
Style 76F (DFRH*)
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
3476F
3976F
3, 4, 6
3, 4, 6
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
3476FFT
3976FFT
3, 4
3, 4
Flange x Thread
Style 76FO (DFRH, UFLH)
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
Ductile Iron
3476FO
3976FO
3876FO
2, 3, 4
2, 3, 4
3, 4
Dimensions
s
s
Dimensions
G2
Style 76F
Style 76FFT
Y
Style 76FO
G2
s
s
F
F
Dimensions
s
s
l
G1
A
B
STYLE 78
Flange x Flange
Style 78F (DFRH*)
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
3478F
3978F
2, 3, 4, 6
2, 3, 4, 6
Material
Model
Size (inches)
Flange x Thread
Style 78FO (DFRH, UFLH)
Steel, Fabricated
Stainless Steel, Fabricated
3478FFT
3978FFT
3, 4
3, 4
Material
Model
Size (inches)
Steel, Fabricated
Stainless Steel, Fabricated
Ductile Iron
3478FO
3978FO
3878FO
2, 3, 4
2, 3, 4
3, 4
Style 78F
Style 78FFT
Dimensions
G2
s
s
Dimensions
s
s
Style 78FO
G1
Dimensions
s
s
l
Dimensions Chart on page 20: s Steel & Stainless Steel l Aluminum, Ductile Iron & Bronze
14
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
S p e c i a l t y A pp l i c a t i o n s
Specialty Swivel Joints
OPW Engineered Systems specializes in the custom design and manufacture
of swivel joints for special applications, including but not limited to:
Hose reels
Tank trucks
Plastics machinery
Machine tools
Drum fillers
Filtration equipment
Hydraulics
OPW engineers can help you determine the appropriate design for your special
application by providing experienced consultation backed up by the right swivel
design, tailored specifically to meet your application needs. OPW specialty swivels are available in a wide range of materials and sizes. Please contact the OPW
Engineered Systems engineering department for assistance with your selection.
Style 20VO
Style 20VO
Style 30VO
Material
Model
Size
Dimensions
Aluminum
Cast Iron
Aluminum
2620-VO
2820-VO
3620-VO
1-1/2" x 2"
1-1/2" x 2", 2" x 2"
1-1/2" x 2", 2" x 2-1/2"
Use 1-1/2"
Use 1-1/2", 2"
Use 1-1/2", 2"
Material
Model
Size
Dimensions
Aluminum
Cast Iron
Aluminum
Aluminum
2630-VO
2830-VO
3630VO
3630VOG
1-1/2" x 2"
1-1/2" x 2", 2" x 2"
2", 3", 4"
1-1/2" x 2"
Use 1-1/2"
Use1-1/2", 2"
Use 2", 3", 4"
Use 1-1/2"
l
l
l
Style 30VO
G1
l
l
l
l
G1
Style 3637VO
H1
G1
Style 3637VO
Material
Model
Size
Dimensions
Aluminum
3637VO
3" x 3"
see below*
B
A
H1
Dimensions Chart on page 20: s Steel & Stainless Steel l Aluminum, Ductile Iron & Bronze
PHONE: (800) 547-9393 (513) 696-1500 Fax: (800) 245-8536 (513) 932-9845
2726 Henkle Drive Lebanon, OH 45036 www.opw-es.com
15
E N D U R A D U A L S P L I T F L A N G E S W I V E L S
ENDURA
Dual Split Flange
Swivels
(8400
and
8900 Series)
Benefits
Endurance heavy-duty construction
and unique design features result in
long-life, hassle-free performance.
Smooth, Easy Operation the sealed,
one-piece deep-groove dual ball
bearing assembly ensures smooth
and easy rotation.
Improves Uptime Performance the
simple, three-piece design allows for
the quickest and easiest disassembly
and repair in the industry, which means
less downtime, less labor, and less cost.
Lowest Overall Cost of Ownership
heavy-duty construction ensures
long-life reliability while the unique
design features allow for cost-effective
preventive maintenance servicing
and the easiest, most cost effective
seal and bearing replacement of
any swivel. Optimized performance,
downtime prevention, and reduced
maintenance time and costs make
this the best overall swivel value
in the industry.
16
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
E N D U R A D U A L S P L I T F L A N G E S W I V E L S
Features
360 Rotation full range of motion for ease of use.
Deep-Groove Replaceable Dual Ball Bearing
Technology a precision-engineered, one-piece ball
bearing assembly means there are no individual
balls to deal with. If required, bearing replacement
is quick and easy; simply replace the old bearing
chamber with a new one. The ENDURA DSF 8900
Series features a 316 Stainless Steel replaceable
dual ball bearing chamber.
Sealing Flange
Environmental
Seal
Main Seal
Back-Up Seal
Sealed, Deep-Groove
Dual Ball Bearing
Chamber
Sealing Flange
PHONE: (800) 547-9393 (513) 696-1500 Fax: (800) 245-8536 (513) 932-9845
2726 Henkle Drive Lebanon, OH 45036 www.opw-es.com
17
18
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
e p a i r
a r t s
n d
r o c e d u r e s
Lubricants
Seal Material
Kit No.
Buna-N
Viton
Teflon
EPT
Neoprene
3001-K
3002-K
3003-K
3004-K
3005-K
OPW swivel joints should be lubricated periodically, depending on service and operating conditions. For normal
operation, annually is sufficient. Frequent lubricating may be required when service is severe, such as high
temperatures, heavy loads, or constant rotation.
Part #
880-0089
Description
High Performance Synthetic Lubricant 14 oz. (400 grams) cartridge
Specially formulated to reduce friction and wear
Warning: EPT/EPDMSeals require the use of a OPW 885-0085 or a non-petroleum based lubricant.
Ball Bearings
Both steel and stainless steel ball bearings are available for all OPW swivels. Each swivel plane of rotation has two races;
quantities shown below are per pair of races.
Size (inches)
Part No.
Steel Balls
Part No.
Stainless Balls
3/4 & 1
1-1/4 & 1-1/2
2
3
4
6
8
10
40
56
48
66
84
76
98
98
H-7063-M1
H-7063-M1
H-6712-M2
H-6712-M
H-6712-M
H-6780-M
H-6780-M
H-30162-M
H-30035-M
H-30035-M
H-1171-M
H-1171-M
H-1171-M
H-30036-M
H-30036-M
H-30147-M
3200 Series swivels use H-4577-M balls. 23200 Series swivels use H-4576-M balls.
Flange Dimensions
Type
Size (inches)
2
3
3
4
4
6
8
10
Flange O.D.
in,
(mm)
6
7-1/2
5-5/8
9
6-5/8
11
13-1/2
16
(153)
(191)
(143)
(229)
(169)
(280)
(343)
(407)
Bolt Circle
in,
(mm)
4-3/4
6
4-7/8
7-1/2
5-7/8
9-1/2
11-3/4
17
(121)
(153)
(124)
(191)
(150)
(150)
(242)
(432)
No. Bolt
Holes
4
4
8
8
8
8
8
12
Bolt Dia.
in,
(mm)
5/8
5/8
3/8
5/8
3/8
3/4
3/4
7/8
(16)
(16)
(10)
(16)
(10)
(19)
(19)
(22)
Note: 300 lb., 600 lb., other types of flanges available on special order. Consult factory.
PHONE: (800) 547-9393 (513) 696-1500 Fax: (800) 245-8536 (513) 932-9845
2726 Henkle Drive Lebanon, OH 45036 www.opw-es.com
19
i m e n s i o n s
Dimensions
s Steel & Stainless Steel U.S. (inches)
All dimensions are based on short radius elbows in 3/4" to 4" sizes; long radius elbows in 6, 8 and 10 sizes.
Size
3/4
1
1-1/4
1-1/2
2
2
3
4
6
8
10
2-7/16
2-7/16
2-15/16
2-15/16
4-1/8
3-3/4
5-1/8
6-1/4
9
11-7/8
13-9/16
1-3/4
1-3/4
2-5/16
2-5/16
3-1/8
2-15/16
4-1/4
5-5/16
D1
3-15/16
3-15/16
4-5/8
4-5/8
5-1/16
5-11/16
5-7/8a
6-3/8
D2
D3
G1
4-5/16
9-1/8
12-1/8
10-1/4a
10-3/4
13-7/16
16
19-1/8
12-3/4a
12-3/4
14-7/16
16
19-1/8
4-3/4
8-1/8
6-1/8
10-3/4a
12-3/4
24-7/16b
32
41-1/8
2-1/2
2-1/2
3
3
4-1/16
3-1/8
5-1/16
6-5/16
G2
G3
4-9/16
5-13/16
7-1/16
12-9/16
16-1/16
19-1/16
3
4
9
12
15
H1
3-15/16
3-15/16
4-11/16
4-11/16
6-7/16
5-5/8
8-1/8a
9-7/16
H2
H3
8-5/8
10-1/8
1-1/4
10-1/2a
11-3/4
18-15/16c
24
30-1/8
11-3/4a
12-3/4
19-7/16
24
30-1/8
1-1/2
2
2
Cast High-Pressure Steel only. A=Add 1/4" for Stainless Steel units. B=21 7/16" on styles 76F and 78F. C=15 15/16" on styles 56F and 58F.
Size
1
1-1/2
2-7/16
2-15/16
3-3/4
4-7/8
6-1/16
9-1/8
3
4
6
1-3/4
2-3/8
2-15/16
4d
5e
D1
D2
4-5/16f
4-5/8
5-11/16
6-5/8
7-3/16
G1
4-5/16
4-3/4
6-1/8
7-5/8g
9-1/4
14-1/8
6-5/8
7-5/8
9-15/16
G2
2-1/2
3
3-1/8
4-5/8
5
5-1/2
5
6-1/16
7-3/4
H1
H2
4-15/16f
4-11/16
5-5/8
6-7/8
7-11/16
L
1-1/4
1-1/2
2
6-7/8
8-1/8
12-7/8
D=Aluminum is 4 11/16". E=Aluminum is 5 13/16". F=Ductile Iron is 3 15/16". G=10 3/8" on Aluminum model nos. 3640FTO and 3644FTO.
Size
3/4"
1"
1-1/4"
1-1/2"
2"
2"
3"
4"
6"
8"
10"
62
62
75
75
105
96
131
159
229
302
345
D1
45
45
59
59
80
75
108
135
100
100
118
118
129
145
150a
162
D2
D3
G1
110
232
308
261a
273
342
407
486
324a
324
367
407
486
121
207
156
273a
324
621b
813
1045
64
64
77
77
103
80
129
161
G2
G3
116
51
148
180
319
408
485
77
102
229
305
381
H1
100
100
119
119
164
143
207a
240
H2
H3
219
257
267a
299
481c
610
765
299a
324
494
610
765
32
38
51
51
Cast High-Pressure Steel only. A=Add 1/4" for Stainless Steel units. B=21 7/16" on styles 76F and 78F. C= 15 15/16
on styles 56F and 58F.
Size
1"
1-1/2"
2"
3"
4"
6"
62
75
96
124
154
232
45
60
75
102a
127e
D1
110f
118
145
169
183
D2
169
194
253
110
121
156
194g
235
359
G1
64
77
80
118
127
G2
140
127
154
197
H1
126f
119
143
175
196
H2
175
207
327
L
32
38
51
D=Aluminum is 4-11/16". E= Aluminum is 5-13/16". F=Ductile Iron is 3-15/16". G=10 3/8" on Aluminum model
nos. 3640FTO and 3644FTO.
20
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
Approximate Weights
20
30
40
50
60
70
80
10
3 lbs.
1
4 lbs.
2 kg
5 lbs.
2 kg
8 lbs.
4 kg
7 lbs.
3 kg
9 lbs.
4 kg
e i g h t s
/S
p e c i f i c a t i o n s
pp r o x i m a t e
Style
4
2
5
2
6
3
9
4
8
4
10
5
8
4
9
4
11
5
16
7
14
6
18
8
22
10
20
9
15
7
18
8
23
10
35
16
30
14
40
18
50
23
47
22
22
10
24
11
34
15
48
22
38
17
58
26
70
32
64
29
20F
30F
40F
50F
60F
70F
80F
10F
lbs.
kgs
lbs.
kgs
lbs.
kgs
lbs.
kgs
lbs.
kgs
lbs.
kgs
lbs.
kgs
lbs.
kgs
10
20lbs.
9 kg
21 lbs.
10 kg
23 lbs.
10 kg
28 lbs.
13 kg
26 lbs.
12 kg
30 lbs.
14 kg
35 lbs.
16 kg
34 lbs.
15 kg
37
17
40
18
43
20
56
25
53
24
60
27
72
33
70
32
49
22
56
25
62
28
78
35
70
32
85
39
100
45
95
43
95
43
112
51
128
58
169
77
153
69
186
84
225
102
203
92
210
95
245
111
275
125
415
188
365
166
465
211
580
263
530
240
265
120
315
143
380
172
525
238
435
197
615
279
735
33
645
293
Weights shown are for steel and stainless steel swivels. Multiply table value by .30 for approximate weights of aluminum swivels. Multiply table value by
.90 for approximate weights of ductile iron and bronze swivels.
Specifications
All OPW swivel joints are full bore schedule 40 construction with short radius elbows, except 6", 8", and 10 fabricated steel and
stainless steel swivels which have long radius elbows. Ball bearing raceways and sealing surfaces in all swivels are precision
machined and micro-finished to assure friction-free operation and superior sealing characteristics. All steel and ductile iron swivels
are painted blue. Detailed specifications by series are as follows:
3200 Series (Cast Steel, High-Pressure)
Bodies and tails of cast 1040 carbon steel with hardened raceways. Ball bearings are precision-ground steel. Buna-N main O-ring
seal with Teflon back-up ring, and Buna-N O-ring dust seal are standard.
3300 Series (Cast Bronze)
Bodies and tails of hard, wear-resistant cast bronze (ASTM B62-83600). Precision-ground steel balls, Buna-N O-ring main seal and
felt dust seal are standard. 1" size has Buna-N O-ring dust seal.
3400 Series (Fabricated Steel)
Bodies and tails of 1040 carbon steel with hardened raceways. Welded construction; 100% penetration welding by welders certified
to ASME Boiler and Pressure Vessel Code, Section IX. Precision-ground steel balls, Buna-N O-ring main seal, Buna-N O-ring dust
seal. Standard flanges are ASME 150 lb. raised face type.
3600 Series (Cast Aluminum)
Bodies and tails of cast A-356 high-tensile strength aluminum. Precision-ground steel balls, Buna-N O-ring main seal, and felt dust
seal are standard. 1" size has Buna-N O-ring dust seal. Flanges are dimensionally compatible to ASME 150 lb. flat face configuration.
3700 Series (Cast Stainless Steel)
Bodies and tails of high quality cast ASTM A351-CF3M/CF8M stainless steel. Precision-ground stainless steel balls, Buna-N O-ring
main seal and Buna-N O-ring dust seal.
3800 Series (Cast Ductile Iron)
Bodies and tails of cast A-536 ductile iron. Precision-ground steel balls, Buna-N O-ring main seal, and felt dust seal are standard.
Buna-N O-ring dust seal standard in 1" size. ASME B16.1, Class 125 dimensionally equal to 150lb.ASMERFFlange.
3900 Series (Fabricated Stainless Steel)
Bodies and tails of high-quality ASTM A351-CF3M/CF8M stainless steel. Welded construction; 100% penetration welding by welders
certified to ASME Boiler and Pressure Vessel Code, Section IX. Precision-ground stainless steel ball bearings, Buna-N O-ring main
seal, Buna-N O-ring dust seal. Standard flanges are ASME 150 lb. raised face type.
Refer to the Pressure/Temperature chart on page 5 to choose the proper seal and body material for the swivel you need.
Or, if you have a special application and are unable to locate the particular swivel you have in mind, please contact your local
OPW Engineered Systems representative or the factory for assistance.
PHONE: (800) 547-9393 (513) 696-1500 Fax: (800) 245-8536 (513) 932-9845
2726 Henkle Drive Lebanon, OH 45036 www.opw-es.com
21
Sealing Flange
Main Seal
Back-Up Seal
Environmental
Seal
Sealed, Deep-Groove
Dual Ball Bearing
Chamber
Sealing Flange
8420F
Endura Dual Split-Flange (DSF) Swivels
360 rotation with built-in leak detection, plus
durability, reliability and easy maintenance.
O P W S wivel J oints
3910
Fabricated SST,
Style 10,
Female NPT
t 3740
Cast SST,
Style 40, Female NPT
t 3980
Fabricated SST,
Style 80, Female NPT
22
t 3630 VO
Cast Aluminum,
Style 30VO,
Female NPT
xVictaulic Groove
3970 W
Fabricated SST,
Style 70W, Beveled
for Welding
t 3950
Fabricated SST,
Style 50, Female NPT
3960 FO
Fabricated SST,
Style 60FO, 150 Lb. Flange
x Female NPT
3330
Cast Bronze,
Style 30,
Female NPT
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
ORDERING CHART
Style 40
Style 10
3 planes of
rotation
Style 20
1 plane of rotation
Style 50
Ordering Chart:
1 plane of rotation
Style 60
2 planes of rotation
1 plane of
rotation
Style 30
2 planes of rotation
Style 70
2 planes of rotation
Style 80
3 planes of rotation
Style 44 is drop tube swivel w/handle. Styles 35, 45, 55 have threaded boss. Styles 56, 58, 76, 78 have spring balance attachment lugs.
3420F - 0403
1 - Buna-N (Standard)
2 - Fluorocarbon
3 - PTFE
4 - EPDM
5 - Food Grade Nitrile
Kalrez, Chemraz and other
seal materials available.
Construction
End Connections
Size
82
- Steel Endura DSF Single Race
Endura DSF 84
- Steel Endura DSF Dual Race
Split Flange 87
- 316 SST Endura DSF Single Race
Swivels
89 - 316 SST Endura DSF Dual Race
007
010
012
015
020
030
040
060
080
100
120
NOSUFFIXLETTER (S) indicates Female NPTthreads both ends. 300 lb. flanges available
on some models. BSPTthreads available.
Conventional
Swivels
- 3/4"
- 1"
- 1-1/4"
- 1-1/2"
- 2"
- 3"
- 4"
- 6"
- 8"
- 10"
- 12"
Availability of styles, sizes and materials may vary depending upon swivel configuration. Consult OPW Customer Service regarding your exact requirements.
PHONE: (800) 547-9393 (513) 696-1500 Fax: (800) 245-8536 (513) 932-9845
2726 Henkle Drive Lebanon, OH 45036 www.opw-es.com
23
OPW Fluid Transfer Group (OPWFTG), part of Dover Corporation (NYSE:DOV), is comprised of market-leading operating companies, each dedicated to
designing, manufacturing and distributing world-class solutions for the safe handling and transporting of hazardous bulk products. In addition to these
companies, OPWFTG has manufacturing plants in North America, Europe, Brazil and India; and sales offices in Singapore, and China.
Throughout the world, OPWFTG companies are hard at work ensuring the safe processing, loading, transporting and unloading of hazardous bulk products
and safeguarding against costly petroleum and chemical spills, tank overfills and fugitive vapor emissions. Whether your need is in the chemical plant, at
the terminal loading rack, or outfitting a fleet of rail tank cars, cargo tanks or dry-bulk trailers, OPWFTG systems set the standard for safety, performance
and peace-of-mind assurance in the most rigorous and demanding applications. If the safe, profitable handling of hazardous liquids and dry bulk commodities
such as gasoline and diesel, chlorine, chlor-alkali products, LPG, acids, cement, flour and starch, among others, is your concern, trust OPWFTG.
EXPERT SOLUTIONS FOR THE SAFE HANDLING & TRANSPORTING OF HAZARDOUS BULK PRODUCTS
Load
Transporting
Unload
Loading Arms
Couplers
Rack Monitors
Dry Disconnects
APICoupler
Swivels
Cargo Tanks
Manholes
Vapor Vents
Electronics
Internal Valves
API Adaptors
Sealed Parcel
Pneumatic
Controls
Manifold Systems
Drylok Couplers
Adaptors
Delivery Elbows
Vapor Recovery Elbows
Swivels
Chlorine
Acids & Bases
Amines
Anhydrous
Ammonia
Propylene
Butadiene
Hazardous Liquids
Loading Arms
Autoloks
Kamvaloks
Dryloks
Loading Manholes
Valves
Actuators
Swivels
Epsilon
Cargo Tanks
Manholes
Vapor Vents
Electronics
Internal Valves
Sealed Parcel
Epsilon
Loading Arms
Autoloks
Kamvaloks
Dryloks
Valves
Actuators
Safety Breakaways
Swivels
Epsilon
Industrial Valves
Sight Flow Indicators
Butterfly Valves
Swivels
Loading Arms
Aerators
Hatch Covers
Swivels
Cargo Tanks
Manholes
Check Valves
Hopper Tees
Butterfly Valves
Aerators
Weld Rings
Railcars
Manholes
Hatches
Access Ports
Check Valves
Hopper Tees
Butterfly Valves
Aerators
Pressure Vacuum Valves
Aerators
Butterfly Valves
Tank Hatches
Pressure Relief
Vacuum Relief
Temperature Monitoring
Cargo Tanks
Manholes
Vapor Vents
Electronics
Weld Rings
Hopper Tees
Pneumatic
Controls
Sealed Parcel
Dry Disconnets
Epsilon
Loading Arms
Couplers
Rack Monitors
Swivels
Dry Disconnects
Quick Disconnects
Butterfly Valves
Epsilon
DRYBULK
Gasoline
Ethanol
Alcohols
Fuel Oil
LPG
Diesel
Biodiesel
Cement
Flour/Starch
Pharmaceuticals
INDUSTRIAL/GENERAL
PETROLEUM
Processing
CHEMICALS
Applications
Food Processing
Pharmaceuticals
Waste Water
High-Purity Liquids
Breweries
Pulp and Paper
Steel Processing
Loading Arms
Couplers
Rack Monitors
Swivels
Dry Disconnects
Quick Disconnects
Butterfly Valves
Epsilon
India
36 Marol Co-op. Ind. Est. Ltd.
2nd Floor, M.V. Road., Marol
Andheri (E), Mumbai 400 059
Tel: +91 22 2851 7296, 91 22 2851 7355
Fax: +91 22 2851 7333
www.opwftgindia.com
ASIA PACIFIC
Telephone: +65 9679 1762
2726 Henkle Drive
Lebanon, OH 45306 USA
Telephone: +1 513 696 1500
Fax: +1 513 932 9845
SOUTHAMERICA
Rua Manuel Augusto de Alvarenga, 155
So Paulo, So Paulo, Brazil
CEP 04402-050
Telephone: +55 11 5564 6466
Fax: +55 11 5679 7960
www.opwftg.com.br
EUROPE
Roggestraat 38, 2153 GC Nieuw-Vennep
P.O. Box 32, 2150 AA Nieuw-Vennep
The Netherlands
Telephone: +31 252 660 300
Fax: +31 252 687 258
www.opwftg.nl
CHINA
Suite 25 B, Suntime
International Mansion
450 Fushan Road,
Shanghai, China 200122
Tel: +011 86 21 5830 7595
Fax: +011 86 21 5830 7535
www.opwftgchina.com
UNITED STATES
4680 Parkway Dr., Suite 203
Mason, Ohio 45040 USA
Telephone: +1 513 696 1798
Fax: +1 513 204 5770
www.opwftg.com
Distributed By:
PHONE: (800) 547-9393 (513) 696-1500 Fax: (800) 245-8536 (513) 932-9845
2726 Henkle Drive Lebanon, OH 45036 www.opw-es.com
ES-SJ-12/04-1M