Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
PM Counters
OMC Document
Reference Guide
Release B10
Status
RELEASED
Short title
PM Counters
All rights reserved. Passing on and copying of this document, use
and communication of its contents not permitted without written
authorization from Alcatel-Lucent.
2 / 1392
Contents
Contents
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1
10
11
12
3 / 1392
Contents
13
14
15
16
17
18
19
20
21
22
23
24
25
12.2
Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
12.3
Traffic Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
BSC-TYPE 26 - TCH outgoing handover per adjacency measurements . . . . . . . . . . . . . . . . . . . . . 287
13.1
All TYPE 26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288
13.2
Adjacency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288
BSC-TYPE 27 - 2G TCH incoming handover per adjacency measurements . . . . . . . . . . . . . . . . . 297
14.1
All TYPE 27 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
14.2
Adjacency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
BSC-TYPE 28 - SDCCH handover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307
15.1
All TYPE 28 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
15.2
Handover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
BSC-TYPE 29 - Directed retry measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357
16.1
All TYPE 29 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358
16.2
Handover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358
BSC-TYPE 30 - SMS CB measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387
17.1
All TYPE 30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388
17.2
Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388
17.3
Traffic Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390
BSC-TYPE 31 - Radio Measurement Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393
18.1
All TYPE 31 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394
18.2
Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395
18.3
Resource Availability & Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 453
BSC-TYPE 32 - Change of frequency band measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 455
19.1
All TYPE 32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 456
19.2
Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 456
BSC-TYPE 33 - Electro-Magnetic Emission counters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 465
20.1
All TYPE 33 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 466
20.2
Electro-Magnetic Emission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 466
BSC-TYPE 34 - Voice Group Call Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 469
21.1
All TYPE 34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 470
21.2
Handover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 470
21.3
Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 473
21.4
Resource Availability & Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 482
21.5
Traffic Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 484
BSC-TYPE 110 - Overview measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 491
22.1
All TYPE 110 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492
22.2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500
22.3
Handover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509
22.4
Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 599
22.5
Resource Availability & Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 683
22.6
Traffic Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 735
BSC-TYPE 180 - 2G Traffic flow measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 777
23.1
All TYPE 180 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 778
23.2
Adjacency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 778
MFS-GPRS Counters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 783
24.1
All MFS-GPRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 784
24.2
Quality of service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 799
24.3
Resource availability and usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1017
24.4
Traffic load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1204
MFS-LCS Counters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1351
25.1
All MFS-LCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1352
4 / 1392
Contents
25.2
25.3
5 / 1392
Contents
6 / 1392
Preface
Preface
Purpose
Whats New
In Edition 09
This document was generated from the BSC Counters database edition 13rl
after update GCD_B10MR1_BSC_Counters table and from the MFS Counters
database edition 07rl.
In Edition 08
This document was generated from the BSC Counters database edition 13rl
and from the MFS Counters database edition 07rl.
In Edition 07
This document was generated from the BSC Counters database edition 09rl
and from the MFS Counters database edition 06rl.
In Edition 06
This document was generated from the BSC Counters database edition 08rl
and from the MFS Counters database edition 05rl.
In Edition 05
This document was generated from the BSC Counters database edition 08rl
and from the MFS Counters database edition 02rl.
In Edition 04
This document was generated from the BSC Counters database edition 07rl
and from the MFS Counters database edition 02rl.
In Edition 03
This document was generated from the BSC Counters database edition 04rl
and from the MFS Counters database edition 02rl.
In Edition 02
This document was generated from the BSC Counters database edition 03rl
and from the MFS Counters database edition 02rl.
7 / 1392
Preface
In Edition 01
First official release of document.
This document was generated from the BSC Counters database edition 02rl
and from the MFS Counters database edition 02rl.
Audience
Assumed Knowledge
8 / 1392
9 / 1392
10 / 1392
11 / 1392
1.2 Handover
1.2.1 All Handover
C710 - NB_TCH_OUT_HO_REQ_TRX (Section 1.2.2.2.2.1 )
1.2.2 TCH
1.2.2.1 All TCH
C710 - NB_TCH_OUT_HO_REQ_TRX (Section 1.2.2.2.2.1 )
1.2.2.2 Outgoing
1.2.2.2.1 All Outgoing
C710 - NB_TCH_OUT_HO_REQ_TRX (Section 1.2.2.2.2.1 )
1.2.2.2.2
1.2.2.2.2.1 C710 - NB_TCH_OUT_HO_REQ_TRX
Long Name
NB_TCH_OUT_HO_REQ_TRX
Definition
Trigger condition
1) Intracell HO: Whenever the BSC process responsible for the handover
procedure starts an intra cell TCH handover procedure. 2) Internal intercell HO:
Whenever the BSC process responsible for the handover procedure selects a
target cell (among a list of target cells) for internal inter cell TCH handover. 3)
External HO: Whenever a 48.008 HANDOVER REQUIRED message is sent on
A interface to the MSC. If more than one 48.008 HANDOVER REQUIRED is
sent in the frame of the same Handover procedure, the counter is incremented
only once. 48.008 HANDOVER REQUIRED is sent in following situations: 1) An
external handover alarm has been raised, with corresponding list of candidate
cells. 2) The list of candidate cells for the current alarm has been updated.
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Sub Domain 1
TCH
Sub Domain 2
Outgoing
Sub Domain 3
Measured Object
TRX
Type Name
Traffic measurements
Type Definition
External Comment
12 / 1392
13 / 1392
1.3.2.2 Internal
1.3.2.2.1 All Internal
C717a - NB_INC_IDR_SUCC_TRX (Section 1.3.2.2.2.1 )
1.3.2.2.2 Success
1.3.2.2.2.1 C717a - NB_INC_IDR_SUCC_TRX
Long Name
NB_INC_IDR_SUCC_TRX
Definition
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Success
Measured Object
TRX
Type Name
Traffic measurements
Type Definition
External Comment
14 / 1392
1.3.3.2 SDCCH
1.3.3.2.1 All SDCCH
C137 - NB_SDCCH_DROP_EST_PHAS_BSS_PB (Section 1.3.3.2.2.1 )
C138 - NB_SDCCH_DROP_EST_PHAS_RLF (Section 1.3.3.2.2.2 )
1.3.3.2.2 Failure
1.3.3.2.2.1 C137 - NB_SDCCH_DROP_EST_PHAS_BSS_PB
Long Name
NB_SDCCH_DROP_EST_PHAS_BSS_PB
Definition
Trigger condition
Sub Domain 1
Established Phase
Sub Domain 2
SDCCH
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
15 / 1392
NB_SDCCH_DROP_EST_PHAS_RLF
Definition
Number of SDCCH drops on SDCCH established phase due to radio link failure
(radio link timeout or Lapdm timer expiry).
Trigger condition
Sub Domain 1
Established Phase
Sub Domain 2
SDCCH
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
16 / 1392
1.3.3.3 TCH
1.3.3.3.1 All TCH
C14c - NB_TCH_DROP_EST_PHAS_BSS_PB (Section 1.3.3.3.2.1 )
C162a - NB_TCH_DROP_DTAP_EST_PHAS_RLF (Section 1.3.3.3.2.2 )
C162b - NB_TCH_DROP_DTAP_EST_PHAS_BSS_PB (Section 1.3.3.3.2.3 )
C162c - NB_TCH_DROP_DTAP_EST_PHAS_REM_TRANS_FAIL (Section
1.3.3.3.2.4 )
C736 - NB_TCH_DROP_EST_PHAS_RLF_TRX (Section 1.3.3.3.2.5 )
C739 - NB_TCH_DROP_EST_PHAS_REM_TRANS_FAIL_TRX (Section
1.3.3.3.2.6 )
17 / 1392
1.3.3.3.2 Failure
1.3.3.3.2.1 C14c - NB_TCH_DROP_EST_PHAS_BSS_PB
Long Name
NB_TCH_DROP_EST_PHAS_BSS_PB
Definition
Trigger condition
Sub Domain 1
Established Phase
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
18 / 1392
NB_TCH_DROP_DTAP_EST_PHAS_RLF
Definition
Trigger condition
Sub Domain 1
Established Phase
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
19 / 1392
NB_TCH_DROP_DTAP_EST_PHAS_BSS_PB
Definition
Number of TCH (in HR or FR usage) drops in TCH DTAP established phase due
to BSS problem. It may happen that several causes of failures mentioned below
are detected consecutively. In that case, the counter will only be incremented
once, as soon as the call is released. After an external handover, the target BSC
considers that the CONNECT ACK has not already been received.
Trigger condition
Sub Domain 1
Established Phase
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
20 / 1392
NB_TCH_DROP_DTAP_EST_PHAS_REM_TRANS_FAIL
Definition
Trigger condition
Sub Domain 1
Established Phase
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
21 / 1392
NB_TCH_DROP_EST_PHAS_RLF_TRX
Definition
Trigger condition
Sub Domain 1
Established Phase
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
TRX
Type Name
Traffic measurements
Type Definition
External Comment
22 / 1392
NB_TCH_DROP_EST_PHAS_REM_TRANS_FAIL_TRX
Definition
Trigger condition
Sub Domain 1
Established Phase
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
TRX
Type Name
Traffic measurements
Type Definition
External Comment
23 / 1392
1.3.4 Handover
1.3.4.1 All Handover
C03 - NB_OUT_SDCCH_HO_SUCC (Section 1.3.4.2.3.1 )
C07 - NB_SDCCH_DROP_OUT_HO (Section 1.3.4.2.2.1 )
C10 - NB_INC_SDCCH_HO_SUCC (Section 1.3.4.2.3.2 )
C14a - NB_TCH_DROP_HO_PREP_EXEC_FAIL_BSS_PB (Section
1.3.4.3.2.1 )
C621 - NB_TCH_DROP_OUT_HO_EXEC_TRX (Section 1.3.4.3.2.2 )
C711 - NB_TCH_OUT_HO_PREP_FAIL_CONG_TRX (Section 1.3.4.3.2.3 )
C712 - NB_TCH_OUT_HO_SUCC_TRX (Section 1.3.4.3.3.1 )
C713 - NB_TCH_OUT_HO_FAIL_REV_TRX (Section 1.3.4.3.2.4 )
C714 - NB_TCH_OUT_HO_FAIL_NO_REV_TRX (Section 1.3.4.3.2.5 )
C717b - NB_INC_TCH_HO_SUCC_TRX (Section 1.3.4.3.3.2 )
1.3.4.2 SDCCH
1.3.4.2.1 All SDCCH
C03 - NB_OUT_SDCCH_HO_SUCC (Section 1.3.4.2.3.1 )
C07 - NB_SDCCH_DROP_OUT_HO (Section 1.3.4.2.2.1 )
C10 - NB_INC_SDCCH_HO_SUCC (Section 1.3.4.2.3.2 )
1.3.4.2.2 Failure
1.3.4.2.2.1 C07 - NB_SDCCH_DROP_OUT_HO
Long Name
NB_SDCCH_DROP_OUT_HO
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
SDCCH
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
24 / 1392
1.3.4.2.3 Success
1.3.4.2.3.1 C03 - NB_OUT_SDCCH_HO_SUCC
Long Name
NB_OUT_SDCCH_HO_SUCC
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
SDCCH
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
25 / 1392
NB_INC_SDCCH_HO_SUCC
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
SDCCH
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
26 / 1392
1.3.4.3 TCH
1.3.4.3.1 All TCH
C14a - NB_TCH_DROP_HO_PREP_EXEC_FAIL_BSS_PB (Section
1.3.4.3.2.1 )
C621 - NB_TCH_DROP_OUT_HO_EXEC_TRX (Section 1.3.4.3.2.2 )
C711 - NB_TCH_OUT_HO_PREP_FAIL_CONG_TRX (Section 1.3.4.3.2.3 )
C712 - NB_TCH_OUT_HO_SUCC_TRX (Section 1.3.4.3.3.1 )
C713 - NB_TCH_OUT_HO_FAIL_REV_TRX (Section 1.3.4.3.2.4 )
C714 - NB_TCH_OUT_HO_FAIL_NO_REV_TRX (Section 1.3.4.3.2.5 )
C717b - NB_INC_TCH_HO_SUCC_TRX (Section 1.3.4.3.3.2 )
1.3.4.3.2 Failure
1.3.4.3.2.1 C14a - NB_TCH_DROP_HO_PREP_EXEC_FAIL_BSS_PB
Long Name
NB_TCH_DROP_HO_PREP_EXEC_FAIL_BSS_PB
Definition
Number of TCH (in HR or FR usage) drops due to BSS problem during any TCH
handover preparation and execution phases. This counter is incremented on the
cell on which the problem occurs(In the case of internal inter-cell handovers,
it is not incremented on both serving and target cell). For problems that are
not related to a specific cell, the counter related to the serving cell will be
incremented. It may happen that several causes of failures mentioned below
are detected consecutively. In that case, the counter will only be incremented
once, as soon as the handover procedure fails. This counter takes into account
handovers from TCH in traffic or in signaling mode.
27 / 1392
Trigger condition
1) Whenever the BSC receives on Abis interface from the target cell negative
acknowledgment to the TCH channel activation involved in the handover
procedure. 2) Whenever the timer supervising the Channel Activation procedure
(T9103) expires on the target cell during activation of a TCH channel involved in
the handover procedure. 3) Whenever an 48.058 ERROR REPORT message
with a cause value of "O&M intervention" is received on Abis interface from
either the serving or the target cell during the external or internal inter-cell
handover procedure and leads to a transaction failure. 4) Whenever an 48.058
ERROR REPORT message with a cause value of "O&M intervention" is
received on Abis interface on either the old or the new channel during the
internal intra-cell handover procedure and leads to a transaction failure. 5)
Whenever an 48.058 ERROR REPORT message on SAPI 0 with a cause value
of "message sequence error" is received on Abis interface from the serving
cell between the sending of the 48.058 CHANNEL ACTIVATION message and
the reception of the 48.058 CHANNEL ACTIVATION ACKNOWLEDGMENT
during the internal inter-cell TCH handover and leads to a transaction failure. 6)
Whenever an 48.058 ERROR REPORT message on SAPI 0 with a cause value
of "message sequence error" is received on Abis interface on the old channel
between the sending of the 48.058 CHANNEL ACTIVATION message and the
reception of the 48.058 CHANNEL ACTIVATION ACKNOWLEDGE during the
internal intra-cell TCH handover and leads to a transaction failure. 7) Whenever
a LAPD failure related to either serving or target cell is reported to the Layer 3
of the BSC (for an RSL supporting a TCH transaction for handover purpose)
and leads to a transaction failure. 8) Whenever an TCH handover abortion is
initiated by the BSS O&M FAULT MANAGEMENT application part or by the BSS
TELECOM application part as the result of a system defense action which may
be due to BSS equipment failures external to the BSC (e.g. RSL failure or CU
recovery failure), or due to BSC internal hardware problems (e.g. TCU failure
or DTC failure) or due to BSC internal software problems (e.g. inconsistencies
detected between software modules or lack of software resources (memory,
timer reference, file reference...) or communication problems between
different processor boards). 9) Whenever a 48.058 CONNECTION FAILURE
INDICATION message with a cause value of "remote transcoder failure" is
received on Abis interface from the old channel between the sending of the
48.058 CHANNEL ACTIVATION message and the reception of the 48.058
CHANNEL ACTIVATION ACKNOWLEDGE during an internal intra-cell or
inter-cellTCH handover procedure and leads to a transaction failure. Notes :
1. TCH handover failures which are due to O&M operator actions on BTS or
BSC should not be counted. Indeed, in case of numerous failures due to O&M
commands, this counter will overestimate failures which are due to problems
which are internal to the BSS. However, due to the current implementation which
does not allow to be aware of the origin of the failure, O&M operator actions will
also be counted. 2. It may happen that the counter can not be incremented
since it is implemented within the faulty entity.
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Traffic measurements
28 / 1392
Type Definition
External Comment
29 / 1392
NB_TCH_DROP_OUT_HO_EXEC_TRX
Definition
Number of TCH drops during the execution of any TCH outgoing handover,
per TRX. This counter takes into account handovers from TCH in traffic or in
signaling mode. MC621 = C621
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
TRX
Type Name
Traffic measurements
Type Definition
External Comment
30 / 1392
NB_TCH_OUT_HO_PREP_FAIL_CONG_TRX
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
TRX
Type Name
Traffic measurements
Type Definition
External Comment
31 / 1392
NB_TCH_OUT_HO_FAIL_REV_TRX
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
TRX
Type Name
Traffic measurements
Type Definition
External Comment
32 / 1392
NB_TCH_OUT_HO_FAIL_NO_REV_TRX
Definition
Trigger condition
1) External TCH HO: Whenever the timer supervising the handover procedure on
the serving cell (T8) expires, except if a 48.008 CLEAR COMMAND with "normal
event/call control" cause was received from the MSC, leading to a normal call
release. In such a case, the handover is considered as successful. 2) Internal
intercell TCH HO: Whenever the timer supervising the handover procedure
(T3103) expires during an internal inter-cell TCH handover. 3) Intracell TCH HO:
Whenever the timer supervising the handover procedure (T3107) expires during
an internal intra-cell Note: This counter counts both inter-PLMN and intra-PLMN
handover events. Note: This counter counts hantover to UMTS
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
TRX
Type Name
Traffic measurements
Type Definition
External Comment
33 / 1392
1.3.4.3.3 Success
1.3.4.3.3.1 C712 - NB_TCH_OUT_HO_SUCC_TRX
Long Name
NB_TCH_OUT_HO_SUCC_TRX
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Success
Measured Object
TRX
Type Name
Traffic measurements
Type Definition
External Comment
34 / 1392
NB_INC_TCH_HO_SUCC_TRX
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Success
Measured Object
TRX
Type Name
Traffic measurements
Type Definition
External Comment
35 / 1392
1.3.5 Speech
1.3.5.1 All Speech
C170 - NB_CALL_TFO (Section 1.3.5.2.2.1 )
C171 - NB_TFO_CODEC_REQ (Section 1.3.5.2.2.2 )
1.3.5.2 TFO
1.3.5.2.1 All TFO
C170 - NB_CALL_TFO (Section 1.3.5.2.2.1 )
C171 - NB_TFO_CODEC_REQ (Section 1.3.5.2.2.2 )
1.3.5.2.2
1.3.5.2.2.1 C170 - NB_CALL_TFO
Long Name
NB_CALL_TFO
Definition
Number of TCHs assigned in the serving cell for which TFO has been
successfully established.
Trigger condition
For each assigned TCH, the counter is incremented the first time a 48.058 TFO
REPORT message is received by the BSC, indicating that TFO is established
(i.e. TFO = 1 in the TFO Status IE). Note 1: This counter shall be incremented
only once per assigned TCH (i.e. the first time it is received for the assigned
TCH). Note 2: A TCH is seen as assigned in the serving cell between the
sending of 48.058 CHANNEL ACTIVATION message and the receipt of the
48.058 RF CHANNEL RELEASE message. This means that the counter can
be incremented either if the TCH is assigned to serve a normal assignment or
if the TCH is assigned to serve an incoming internal (inter-cell or intra-cell) or
external handover. Note 3: MC170 = C170
Sub Domain 1
Speech
Sub Domain 2
TFO
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
36 / 1392
NB_TFO_CODEC_REQ
Definition
Trigger condition
Sub Domain 1
Speech
Sub Domain 2
TFO
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
37 / 1392
38 / 1392
1.3.6.2
1.3.6.2.1 All
1.3.6.2.2
1.3.6.2.2.1 C901 - NB_Suspend_Resume_req
Long Name
NB_Suspend_Resume_req
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
39 / 1392
Nb_Suspend_fail
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
40 / 1392
Nb_Suspend_succ
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
41 / 1392
1.3.6.2.3 Failure
1.3.6.2.3.1 C612c - NB_TCH_NOR_ASS_PREP_FAIL_T11_EXP
Long Name
NB_TCH_NOR_ASS_PREP_FAIL_T11_EXP
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
42 / 1392
1.3.6.3.2 Success
1.3.6.3.2.1 C161a - NB_DTAP_MO_NOR_ASS_SUCC
Long Name
NB_DTAP_MO_NOR_ASS_SUCC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
DTAP Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
43 / 1392
NB_DTAP_MT_NOR_ASS_SUCC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
DTAP Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
44 / 1392
1.3.6.4.2 Failure
1.3.6.4.2.1 C04 - NB_IMM_ASS_PREP_FAIL_CONG
Long Name
NB_IMM_ASS_PREP_FAIL_CONG
Definition
Trigger condition
All SDCCH sub-channels in the required cell were either Busy or Out of Service,
when the 48.058 CHANNEL REQUIRED message was received.
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
45 / 1392
NB_IMM_ASS_EXEC_FAIL_RADIO
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
46 / 1392
1.3.6.4.3 Success
1.3.6.4.3.1 C01 - NB_IMM_ASS_SUCC_MT
Long Name
NB_IMM_ASS_SUCC_MT
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
47 / 1392
NB_IMM_ASS_SUCC_MO
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
48 / 1392
NB_IMM_ASS_SUCC_MO_LOC_UPD
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
49 / 1392
NB_IMM_ASS_SUCC_MO_SMS
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
50 / 1392
NB_IMM_ASS_SUCC_MO_SUP_SERV
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
51 / 1392
NB_IMM_ASS_SUCC_MO_FOLLOW_ON
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
52 / 1392
NB_IMM_ASS_SUCC_MO_CM_REEST
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
53 / 1392
NB_IMM_ASS_SUCC_MO_L3INFO_UNKNOW
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
54 / 1392
NB_IMM_ASS_SUCC_MO_IMSI_DETACH
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
55 / 1392
NB_IMM_ASS_SUCC_MO_CALL_EST
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
56 / 1392
NB_IMM_ASS_SUCC_MO_LCS
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
57 / 1392
1.3.6.5.2 Failure
1.3.6.5.2.1 C612a - NB_TCH_NOR_ASS_PREP_FAIL_NO_QUEUE
Long Name
NB_TCH_NOR_ASS_PREP_FAIL_NO_QUEUE
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
58 / 1392
NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_FULL
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
59 / 1392
NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_REJ
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
60 / 1392
NB_TCH_NOR_ASS_EXEC_FAIL_RADIO_TRX
Definition
Trigger condition
1) The timer T3107 in the BSS supervising the TCH channel seizure by the
mobile expires (following the sending of 44.018 ASSIGNMENT COMMAND for a
TCH channel that is not involved in a handover procedure). 2) The timer T3107
in the BSS supervising the TCH channel seizure by the mobile expires, following
the sending of 44.018 DTM ASSIGNMENT COMMAND for a TCH channel in
signaling mode. 3) The BSC receives a 44.018 ASSIGNMENT FAILURE on
the old (SDCCH) channel during the normal assignment procedure except in
case of multiband cell, when the normal assignment procedure is performed
in the inner zone and the ASSIGNMENT FAILURE is received with the cause
"protocol error unspecified". 4) The BSC receives a 44.018 DTM ASSIGNMENT
FAILURE on the old (SDCCH) channel during the DTM assignment procedure,
for a TCH in signaling mode.
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Failure
Measured Object
TRX
Type Name
Traffic measurements
Type Definition
External Comment
61 / 1392
NB_TCH_NOR_ASS_PREP_FAIL_CONG_R_ABIS
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
62 / 1392
1.3.6.5.3 Success
1.3.6.5.3.1 C718 - NB_TCH_NOR_ASS_SUCC_TRX
Long Name
NB_TCH_NOR_ASS_SUCC_TRX
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Success
Measured Object
TRX
Type Name
Traffic measurements
Type Definition
External Comment
63 / 1392
64 / 1392
1.4.2.2
1.4.2.2.1 All
1.4.2.2.2
1.4.2.2.2.1 C443 - NB_TIMES_TRAF_DETECTED_LOW
Long Name
NB_TIMES_TRAF_DETECTED_LOW
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
65 / 1392
1.4.2.3 E-GSM
1.4.2.3.1 All E-GSM
C706 - NB_EGSM_MS_ACCESS_EXCEPT_LU (Section 1.4.2.3.2.1 )
1.4.2.3.2
1.4.2.3.2.1 C706 - NB_EGSM_MS_ACCESS_EXCEPT_LU
Long Name
NB_EGSM_MS_ACCESS_EXCEPT_LU
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
E-GSM
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
66 / 1392
1.4.2.4.2
1.4.2.4.2.1 C442 - NB_TIMES_TRAF_DETECTED_HIGH
Long Name
NB_TIMES_TRAF_DETECTED_HIGH
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
67 / 1392
1.4.2.5 Service
1.4.2.5.1 All Service
C701a - NB_TCH_FR_REQ (Section 1.4.2.5.2.1 )
C701b - NB_TCH_DR_REQ (Section 1.4.2.5.2.2 )
C701c - NB_TCH_DR_EFR_REQ (Section 1.4.2.5.2.3 )
C701d - NB_TCH_AMR_REQ (Section 1.4.2.5.2.4 )
C701e - NB_TCH_DATA_REQ (Section 1.4.2.5.2.5 )
C702a - NB_TCH_NOR_FR_ALLOC (Section 1.4.2.5.2.6 )
C702b - NB_TCH_NOR_HR_ALLOC (Section 1.4.2.5.2.7 )
C702c - NB_TCH_NOR_EFR_ALLOC (Section 1.4.2.5.2.8 )
C704a - NB_TCH_NOR_AMR_FR_ALLOC (Section 1.4.2.5.2.9 )
C704b - NB_TCH_NOR_AMR_HR_ALLOC (Section 1.4.2.5.2.10 )
C705 - NB_TCH_NOR_DATA_ALLOC (Section 1.4.2.5.2.11 )
1.4.2.5.2
1.4.2.5.2.1 C701a - NB_TCH_FR_REQ
Long Name
NB_TCH_FR_REQ
Definition
Trigger condition
Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for speech call with
only GSM speech coding algorithm version 1 full rate allowed.
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
68 / 1392
NB_TCH_DR_REQ
Definition
Trigger condition
Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for speech call with
only GSM speech coding algorithm version 1 full rate and GSM speech coding
algorithm version 1 half rate allowed.
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
69 / 1392
NB_TCH_DR_EFR_REQ
Definition
Trigger condition
Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for speech call with
GSM speech coding algorithm version 1 full rate, GSM speech coding algorithm
version 1 half rate and GSM speech coding algorithm version 2 full rate allowed.
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
70 / 1392
NB_TCH_AMR_REQ
Definition
Trigger condition
Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for speech call with
GSM speech coding algorithm version 3 full rate or half rate allowed.
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
71 / 1392
NB_TCH_DATA_REQ
Definition
Trigger condition
Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for data call.
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
72 / 1392
NB_TCH_NOR_FR_ALLOC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
73 / 1392
NB_TCH_NOR_HR_ALLOC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
74 / 1392
NB_TCH_NOR_EFR_ALLOC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
75 / 1392
NB_TCH_NOR_AMR_FR_ALLOC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
76 / 1392
NB_TCH_NOR_AMR_HR_ALLOC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
77 / 1392
NB_TCH_NOR_DATA_ALLOC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
78 / 1392
79 / 1392
1.5.2.2.2 Internal
1.5.2.2.2.1 C15a - NB_INC_IDR_ALLOC
Long Name
NB_INC_IDR_ALLOC
Definition
Trigger condition
The counter is incremented on the target cell whenever the 48.058 CHANNEL
ACTIVATION message of a TCH channel is about to be sent during an internal
directed retry.
Sub Domain 1
Sub Domain 2
Directed Retry
Sub Domain 3
Internal
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
80 / 1392
1.5.2.3 Handover
1.5.2.3.1 All Handover
C13b - NB_INC_EXT_TCH_HO_QUEUED (Section 1.5.2.3.3.1 )
C147 - NB_INC_SDCCH_HO_ALLOC (Section 1.5.2.3.2.1 )
C15b - NB_INC_TCH_HO_ALLOC (Section 1.5.2.3.3.2 )
1.5.2.3.2 SDCCH
1.5.2.3.2.1 C147 - NB_INC_SDCCH_HO_ALLOC
Long Name
NB_INC_SDCCH_HO_ALLOC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Handover
Sub Domain 3
SDCCH
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
81 / 1392
1.5.2.3.3 TCH
1.5.2.3.3.1 C13b - NB_INC_EXT_TCH_HO_QUEUED
Long Name
NB_INC_EXT_TCH_HO_QUEUED
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Handover
Sub Domain 3
TCH
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
82 / 1392
NB_INC_TCH_HO_ALLOC
Definition
Trigger condition
The counter is incremented on the target cell whenever the 48.058 CHANNEL
ACTIVATION message of a TCH channel is about to be sent during any
handover procedure. Note: This counter counts both inter-PLMN and
intra-PLMN handover events.
Sub Domain 1
Sub Domain 2
Handover
Sub Domain 3
TCH
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
83 / 1392
1.5.2.4.2
1.5.2.4.2.1 C148 - NB_IMM_ASS_ALLOC
Long Name
NB_IMM_ASS_ALLOC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
84 / 1392
1.5.2.5 Multiband
1.5.2.5.1 All Multiband
C850 - NB_MULTIBAND_MS_ACCESS_EXCEPT_LU_CELL (Section
1.5.2.5.2.1 )
1.5.2.5.2
1.5.2.5.2.1 C850 - NB_MULTIBAND_MS_ACCESS_EXCEPT_LU_CELL
Long Name
NB_MULTIBAND_MS_ACCESS_EXCEPT_LU_CELL
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Multiband
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
85 / 1392
1.5.2.6.2
1.5.2.6.2.1 C13a - NB_TCH_NOR_ASS_QUEUED
Long Name
NB_TCH_NOR_ASS_QUEUED
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Traffic measurements
Type Definition
External Comment
86 / 1392
NB_TCH_NOR_ASS_ALLOC_TRX
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Measured Object
TRX
Type Name
Traffic measurements
Type Definition
External Comment
87 / 1392
88 / 1392
89 / 1392
90 / 1392
2.2.2 Channel
2.2.2.1 All Channel
C141 - AV_NB_TCH_QUEUED (Section 2.2.2.4.3.1 )
C24 - AV_NB_NOT_AVAIL_TRX_TS (Section 2.2.2.5.2.1 )
C250 - AV_NB_AVAIL_TCH (Section 2.2.2.4.2.1 )
C26 - AV_NB_AVAIL_SDCCH (Section 2.2.2.3.3.1 )
C27 - AV_NB_AVAIL_CCCH (Section 2.2.2.2.2.1 )
C28a - AV_NB_BUSY_CS_TS (Section 2.2.2.4.3.2 )
C29a - NB_MAX_SIMUL_BUSY_CS_TS (Section 2.2.2.4.3.3 )
C30 - AV_NB_BUSY_SDCCH (Section 2.2.2.3.4.1 )
C31 - NB_MAX_SIMUL_BUSY_SDCCH (Section 2.2.2.3.4.2 )
C320a - AV_NB_IDLE_TCH_INTERF_BAND1 (Section 2.2.2.4.3.4 )
C320b - AV_NB_IDLE_TCH_INTERF_BAND2 (Section 2.2.2.4.3.5 )
C320c - AV_NB_IDLE_TCH_INTERF_BAND3 (Section 2.2.2.4.3.6 )
C320d - AV_NB_IDLE_TCH_INTERF_BAND4 (Section 2.2.2.4.3.7 )
C320e - AV_NB_IDLE_TCH_INTERF_BAND5 (Section 2.2.2.4.3.8 )
C34 - TIME_ALL_AVAIL_TRX_TS_BUSY (Section 2.2.2.5.3.1 )
C803 - TIME_SDCCH_CONGESTION (Section 2.2.2.3.2.1 )
91 / 1392
2.2.2.2 CCCH
2.2.2.2.1 All CCCH
C27 - AV_NB_AVAIL_CCCH (Section 2.2.2.2.2.1 )
2.2.2.2.2 Availability
2.2.2.2.2.1 C27 - AV_NB_AVAIL_CCCH
Long Name
AV_NB_AVAIL_CCCH
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
CCCH
Sub Domain 3
Availability
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the availability of the CCCH, SDCCH or TCH channels
External Comment
92 / 1392
2.2.2.3 SDCCH
2.2.2.3.1 All SDCCH
C26 - AV_NB_AVAIL_SDCCH (Section 2.2.2.3.3.1 )
C30 - AV_NB_BUSY_SDCCH (Section 2.2.2.3.4.1 )
C31 - NB_MAX_SIMUL_BUSY_SDCCH (Section 2.2.2.3.4.2 )
C803 - TIME_SDCCH_CONGESTION (Section 2.2.2.3.2.1 )
2.2.2.3.2
2.2.2.3.2.1 C803 - TIME_SDCCH_CONGESTION
Long Name
TIME_SDCCH_CONGESTION
Definition
Cumulated time (in seconds) during which the SDCCH request(s) are not served
because no SDCCH sub-channel is available.
Trigger condition
The time counter is started whenever a SDCCH request cannot be served. The
time counter is stopped whenever one of the following conditions is checked: - if
a SDCCH sub-channel becomes free and usable on a static SDCCH timeslot
or on a dynamic timeslot allocated as SDCCH (i.e. when the timeslot is known
from the SDCCH_RM module). The term "usable" means here that the SDCCH
sub-channel is not mapped on a TCU in a very high overload state, or, - if a
SDCCH request is served successfully. This condition corresponds to the case
the SDCCH_RM module requests the TCH_RM module for a dynamic SDCCH
timeslot.
Sub Domain 1
Channel
Sub Domain 2
SDCCH
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the availability of the CCCH, SDCCH or TCH channels
External Comment
93 / 1392
2.2.2.3.3 Availability
2.2.2.3.3.1 C26 - AV_NB_AVAIL_SDCCH
Long Name
AV_NB_AVAIL_SDCCH
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
SDCCH
Sub Domain 3
Availability
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the availability of the CCCH, SDCCH or TCH channels
External Comment
94 / 1392
2.2.2.3.4 Usage
2.2.2.3.4.1 C30 - AV_NB_BUSY_SDCCH
Long Name
AV_NB_BUSY_SDCCH
Definition
Average number of busy SDCCH subchannels, taking into account the following
SDCCH sub-channels: 1) Static SDCCH/x sub-channels, 2) Dynamic SDCCH
sub-channels which are dynamically allocated on the dynamic SDCCH/8
timeslots.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
SDCCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the availability of the CCCH, SDCCH or TCH channels
External Comment
95 / 1392
NB_MAX_SIMUL_BUSY_SDCCH
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
SDCCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the availability of the CCCH, SDCCH or TCH channels
External Comment
96 / 1392
2.2.2.4 TCH
2.2.2.4.1 All TCH
C141 - AV_NB_TCH_QUEUED (Section 2.2.2.4.3.1 )
C250 - AV_NB_AVAIL_TCH (Section 2.2.2.4.2.1 )
C28a - AV_NB_BUSY_CS_TS (Section 2.2.2.4.3.2 )
C29a - NB_MAX_SIMUL_BUSY_CS_TS (Section 2.2.2.4.3.3 )
C320a - AV_NB_IDLE_TCH_INTERF_BAND1 (Section 2.2.2.4.3.4 )
C320b - AV_NB_IDLE_TCH_INTERF_BAND2 (Section 2.2.2.4.3.5 )
C320c - AV_NB_IDLE_TCH_INTERF_BAND3 (Section 2.2.2.4.3.6 )
C320d - AV_NB_IDLE_TCH_INTERF_BAND4 (Section 2.2.2.4.3.7 )
C320e - AV_NB_IDLE_TCH_INTERF_BAND5 (Section 2.2.2.4.3.8 )
2.2.2.4.2 Availability
2.2.2.4.2.1 C250 - AV_NB_AVAIL_TCH
Long Name
AV_NB_AVAIL_TCH
Definition
Average number of available TCH/PDCH timeslots for traffic usage (i.e. TCH (for
HR or FR usage) or PDCH).
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Availability
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the availability of the CCCH, SDCCH or TCH channels
External Comment
97 / 1392
2.2.2.4.3 Usage
2.2.2.4.3.1 C141 - AV_NB_TCH_QUEUED
Long Name
AV_NB_TCH_QUEUED
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the availability of the CCCH, SDCCH or TCH channels
External Comment
98 / 1392
AV_NB_BUSY_CS_TS
Definition
Trigger condition
The BSC takes periodically a sample of the number of busy TCH radio timeslots
and busy dynamic SDCCH/8 radio timeslots allocated as TCH. The sampling
period is set to the value indicated in the Status Inspection field. At the expiry of
the accumulation period, all samples are averaged (i.e. summed and divided
by the number of samples). The averaged value is rounded up or down to the
nearest value with an accuracy of 0.1. A TCH radio timeslot is considered as
busy during the time it is allocated to a given MS for TCH traffic (in HR or FR
usage). A dynamic SDCCH/8 timeslot allocated as TCH is considered as busy
during the time it is allocated to a given MS for TCH traffic. Note 1: the counter
value that is indicated in the ASCII file (which can be obtained via the OBSYNT
interface) is an integer value (i.e. it is as if the BSC multiplies by 10 the average).
The reported value shall then be divided by 10 afterwards so that the value that
is displayed to the end-user is the correct one. Note 2: This counter does not
take into account the PDCH radio timeslots allocated to the MFS.
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the availability of the CCCH, SDCCH or TCH channels
External Comment
99 / 1392
NB_MAX_SIMUL_BUSY_CS_TS
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the availability of the CCCH, SDCCH or TCH channels
External Comment
100 / 1392
AV_NB_IDLE_TCH_INTERF_BAND1
Definition
Average number of free TCH and free dynamic SDCCH/8 radio timeslots
belonging to the interference band 1. This number is updated upon the receipt
of 48.058 RF RESOURCE INDICATION.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the availability of the CCCH, SDCCH or TCH channels
External Comment
101 / 1392
AV_NB_IDLE_TCH_INTERF_BAND2
Definition
Average number of free TCH and free dynamic SDCCH/8 radio timeslots
belonging to the interference band 2. This number is updated upon the receipt
of 48.058 RF RESOURCE INDICATION.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the availability of the CCCH, SDCCH or TCH channels
External Comment
102 / 1392
AV_NB_IDLE_TCH_INTERF_BAND3
Definition
Average number of free TCH and free dynamic SDCCH/8 radio timeslots
belonging to the interference band 3. This number is updated upon the receipt
of 48.058 RF RESOURCE INDICATION.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the availability of the CCCH, SDCCH or TCH channels
External Comment
103 / 1392
AV_NB_IDLE_TCH_INTERF_BAND4
Definition
Average number of free TCH and free dynamic SDCCH/8 radio timeslots in FR
or HR usage belonging to the interference band 4. This number is updated upon
the receipt of 48.058 RF RESOURCE INDICATION.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the availability of the CCCH, SDCCH or TCH channels
External Comment
104 / 1392
AV_NB_IDLE_TCH_INTERF_BAND5
Definition
Average number of free TCH and free dynamic SDCCH/8 radio timeslots
belonging to the interference band 5. This number is updated upon the receipt
of 48.058 RF RESOURCE INDICATION.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the availability of the CCCH, SDCCH or TCH channels
External Comment
105 / 1392
2.2.2.5 TRX_TS
2.2.2.5.1 All TRX_TS
C24 - AV_NB_NOT_AVAIL_TRX_TS (Section 2.2.2.5.2.1 )
C34 - TIME_ALL_AVAIL_TRX_TS_BUSY (Section 2.2.2.5.3.1 )
2.2.2.5.2 Availability
2.2.2.5.2.1 C24 - AV_NB_NOT_AVAIL_TRX_TS
Long Name
AV_NB_NOT_AVAIL_TRX_TS
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TRX_TS
Sub Domain 3
Availability
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the availability of the CCCH, SDCCH or TCH channels
External Comment
106 / 1392
2.2.2.5.3 Usage
2.2.2.5.3.1 C34 - TIME_ALL_AVAIL_TRX_TS_BUSY
Long Name
TIME_ALL_AVAIL_TRX_TS_BUSY
Definition
Cumulated time (in seconds) during which there is no free FR TCH sub-channel
to serve an incoming FR TCH request. A TCH sub-channel is seen as busy: i)
if the TCH sub-channel is occupied by a HR or FR CS call (in particular if it is
occupied by the CS part of a DTM call), or ii) if the TCH sub-channel is allocated
to the MFS to carry PS traffic.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TRX_TS
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the availability of the CCCH, SDCCH or TCH channels
External Comment
107 / 1392
108 / 1392
109 / 1392
3.2.2 Channel
3.2.2.1 All Channel
C8a - NB_PAGING_CMD (Section 3.2.2.2.2.1 )
C8b - NB_IMM_ASS_CMD (Section 3.2.2.2.2.2 )
C8c - NB_CHAN_REQD (Section 3.2.2.2.2.3 )
C8d - NB_IMM_ASS_REJ (Section 3.2.2.2.2.4 )
3.2.2.2 CCCH
3.2.2.2.1 All CCCH
C8a - NB_PAGING_CMD (Section 3.2.2.2.2.1 )
C8b - NB_IMM_ASS_CMD (Section 3.2.2.2.2.2 )
C8c - NB_CHAN_REQD (Section 3.2.2.2.2.3 )
C8d - NB_IMM_ASS_REJ (Section 3.2.2.2.2.4 )
110 / 1392
3.2.2.2.2
3.2.2.2.2.1 C8a - NB_PAGING_CMD
Long Name
NB_PAGING_CMD
Definition
PCH load: number of 48.058 PAGING COMMAND messages sent either for PS
traffic or for CS traffic on Abis towards the selected cell.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
CCCH
Sub Domain 3
Measured Object
TRX_TS
Type Name
Type Definition
Set of counters related to the usage of the CCCH channel (PCH load, AGCH
load, RACH load)
External Comment
111 / 1392
NB_IMM_ASS_CMD
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
CCCH
Sub Domain 3
Measured Object
TRX_TS
Type Name
Type Definition
Set of counters related to the usage of the CCCH channel (PCH load, AGCH
load, RACH load)
External Comment
112 / 1392
NB_CHAN_REQD
Definition
RACH load: number of 48.058 CHANNEL REQUIRED received via the selected
cell. All the CHANNEL REQUIRED messages are counted whatever the
Establishment Cause is.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
CCCH
Sub Domain 3
Measured Object
TRX_TS
Type Name
Type Definition
Set of counters related to the usage of the CCCH channel (PCH load, AGCH
load, RACH load)
External Comment
113 / 1392
NB_IMM_ASS_REJ
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
CCCH
Sub Domain 3
Measured Object
TRX_TS
Type Name
Type Definition
Set of counters related to the usage of the CCCH channel (PCH load, AGCH
load, RACH load)
External Comment
114 / 1392
115 / 1392
4.2.2 Channel
4.2.2.1 All Channel
C39 - NB_TIMES_SDCCH_BUSY (Section 4.2.2.2.2.1 )
4.2.2.2 SDCCH
4.2.2.2.1 All SDCCH
C39 - NB_TIMES_SDCCH_BUSY (Section 4.2.2.2.2.1 )
4.2.2.2.2 Usage
4.2.2.2.2.1 C39 - NB_TIMES_SDCCH_BUSY
Long Name
NB_TIMES_SDCCH_BUSY
Definition
Number of times the SDCCH sub-channels belonging to the radio timeslot are
busy.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
SDCCH
Sub Domain 3
Usage
Measured Object
TRX_TS
Type Name
Type Definition
External Comment
116 / 1392
4.3.2 Channel
4.3.2.1 All Channel
C40 - TIME_SDCCH_BUSY (Section 4.3.2.2.2.1 )
4.3.2.2 SDCCH
4.3.2.2.1 All SDCCH
C40 - TIME_SDCCH_BUSY (Section 4.3.2.2.2.1 )
4.3.2.2.2
4.3.2.2.2.1 C40 - TIME_SDCCH_BUSY
Long Name
TIME_SDCCH_BUSY
Definition
Cumulated time during which the SDCCH sub-channels belonging to the related
static or dynamic SDCCH timeslot are busy.
Trigger condition
For the related static or dynamic SDCCH timeslot, the counter cumulates, over
the Accumulation Period, all time unit during which a SDCCH sub-channel is
busy. For each SDCCH allocation of the sub-channel: 1) The counter starts
being incremented after the sending of the 48.058 CHANNEL ACTIVATION
message concerning an SDCCH sub-channel on the related TRX timeslot.
2) The counter stops being incremented after the reception of a 48.058 RF
CHANNEL RELEASE ACKNOWLEDGE message or the expiry of timer
T_RCR_ACK twice (supervising 48.058 RF CHANNEL RELEASE message)
concerning the SDCCH sub-channel previously activated on the related static
or dynamic SDCCH timeslot. Example; Let us consider that on a given static
SDCCH/8 timeslot, - SDCCH sub-channel 1 has been busy for 10 s, - SDCCH
sub-channel 2 has been busy for 20 s, - SDCCH sub-channel n (with 3 <= n <=
8) has not been busy at all. Then, at the expiry of the reporting period, the value
reported by this counter is 10 + 20 = 30 s.
Sub Domain 1
Channel
Sub Domain 2
SDCCH
Sub Domain 3
Measured Object
TRX_TS
Type Name
Type Definition
External Comment
117 / 1392
118 / 1392
119 / 1392
5.2.2 Channel
5.2.2.1 All Channel
C370a - NB_TCH_FR_ALLOC (Section 5.2.2.2.2.1 )
C370b - NB_TCH_HR_ALLOC (Section 5.2.2.2.2.2 )
5.2.2.2 TCH
5.2.2.2.1 All TCH
C370a - NB_TCH_FR_ALLOC (Section 5.2.2.2.2.1 )
C370b - NB_TCH_HR_ALLOC (Section 5.2.2.2.2.2 )
120 / 1392
5.2.2.2.2 Usage
5.2.2.2.2.1 C370a - NB_TCH_FR_ALLOC
Long Name
NB_TCH_FR_ALLOC
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
TRX_TS
Type Name
Type Definition
Set of counters releated to the usage of the TCH channel (in HR or FR usage)
External Comment
121 / 1392
NB_TCH_HR_ALLOC
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
TRX_TS
Type Name
Type Definition
Set of counters releated to the usage of the TCH channel (in HR or FR usage)
External Comment
122 / 1392
5.3.2 Channel
5.3.2.1 All Channel
C380a - TIME_FR_TCH_BUSY (Section 5.3.2.2.2.1 )
C380b - TIME_HR_TCH_BUSY (Section 5.3.2.2.2.2 )
C381a - TIME_FR_TCH_BUSY_BY_MULTIBAND_MS (Section 5.3.2.2.2.3 )
C381b - TIME_HR_TCH_BUSY_BY_MULTIBAND_MS (Section 5.3.2.2.2.4 )
5.3.2.2 TCH
5.3.2.2.1 All TCH
C380a - TIME_FR_TCH_BUSY (Section 5.3.2.2.2.1 )
C380b - TIME_HR_TCH_BUSY (Section 5.3.2.2.2.2 )
C381a - TIME_FR_TCH_BUSY_BY_MULTIBAND_MS (Section 5.3.2.2.2.3 )
C381b - TIME_HR_TCH_BUSY_BY_MULTIBAND_MS (Section 5.3.2.2.2.4 )
123 / 1392
5.3.2.2.2
5.3.2.2.2.1 C380a - TIME_FR_TCH_BUSY
Long Name
TIME_FR_TCH_BUSY
Definition
Time (in seconds) during which a TCH radio timeslot or a dynamic SDCCH/8
timeslot in FR usage (in traffic or in signaling mode) is busy.
Trigger condition
The counter cumulates over the Accumulation Period, per radio timeslot, all unit
times during which the TCH FR channel is busy. For each channel allocation: 1)
The counter starts being incremented after the sending of the 48.058 CHANNEL
ACTIVATION message to the cell concerning a full rate TCH channel (in traffic
or in signaling mode) for the related TRX timeslot. 2) The counter stops
being incremented after the reception of a 48.058 RF CHANNEL RELEASE
ACKNOWLEDGE message or the expiry of timer T_RCR_ACK twice (after the
sending of the 48.058 RF CHANNEL RELEASE message) concerning the TCH
channel previously activated on the related TRX timeslot.
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Measured Object
TRX_TS
Type Name
Type Definition
Set of counters releated to the usage of the TCH channel (in HR or FR usage)
External Comment
124 / 1392
TIME_HR_TCH_BUSY
Definition
Trigger condition
The counter cumulates, over the Accumulation Period, per half radio timeslot,
all unit times during which the TCH HR channel (or the dynamic SDCCH/8
timeslot) is busy. Both "HR timeslots" are counted independently. For each
channel allocation: 1) The counter starts being incremented after the sending of
the 48.058 CHANNEL ACTIVATION message concerning a dynamic SDCCH/8
timeslot or an half rate TCH sub-channel mapped either on the upper half or the
lower half of the related TRX timeslot. 2) The counter stops being incremented
when no HR sub-channel is active anymore on the related TRX channel. This
is after the reception of a 48.058 RF CHANNEL RELEASE ACKNOWLEDGE
message or the expiry of timer T_RCR_ACK twice (after the sending of the
48.058 RF CHANNEL RELEASE message) or the BSC internal radio resource
release due to any BSS problem concerning the last HR TCH channel (or the
dynamic SDCCH/8 timeslot) which was active on the related TRX timeslot.
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Measured Object
TRX_TS
Type Name
Type Definition
Set of counters releated to the usage of the TCH channel (in HR or FR usage)
External Comment
125 / 1392
TIME_FR_TCH_BUSY_BY_MULTIBAND_MS
Definition
Time (in seconds) during which the TCH radio timeslot or the dynamic SDCCH/8
timeslot in FR usage (in traffic or in signaling mode) is busy by a multiband mobile
station. A MS is considered as multiband if it supports: - the P-GSM (or E-GSM
or R-GSM) and the DCS1800 bands if the PLMN_FREQUENCY_BANDS
parameter is set to "GSM900 and DCS1800 bands", or, - the GSM850 and
the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is set to
"GSM850 and DCS1800 bands", or, - the GSM850 and the DCS1900 bands if
the PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1900
bands", or, - the P-GSM (or E-GSM or R-GSM) and the DCS1900 bands if the
PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1900
bands".
Trigger condition
The counter cumulates over the Accumulation Period, per radio timeslot,
all unit times during which the TCH FR channel (or the dynamic SDCCH/8
timeslot) is busy (in traffic or in signaling mode). For each channel
allocation : 1) The counter starts being incremented after the sending of
the 48.058 CHANNEL ACTIVATION message to the cell concerning : - a
full rate TCH channel (or the dynamic SDCCH/8 timeslot) for the related
TRX timeslot - a mobile which has sent a 44.018 CLASSMARK CHANGE
message with a "Mobile Station Classmark 3" Information Element field
specifying that the MS supports: - the P-GSM (or E-GSM or R-GSM) and
the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is set
to "GSM900 and DCS1800 bands", or, - the GSM850 and the DCS1800
bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM850
and DCS1800 bands", or, - the GSM850 and the DCS1900 bands if the
PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1900
bands", or, - the P-GSM (or E-GSM or R-GSM) and the DCS1900 bands if the
PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1900
bands". 2) The counter stops being incremented after the reception of a 48.058
RF CHANNEL RELEASE ACKNOWLEDGE message or the expiry of timer
T_RCR_ACK twice (after the sending of the 48.058 RF CHANNEL RELEASE.
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Measured Object
TRX_TS
Type Name
Type Definition
Set of counters releated to the usage of the TCH channel (in HR or FR usage)
External Comment
126 / 1392
TIME_HR_TCH_BUSY_BY_MULTIBAND_MS
Definition
Time during which the TCH radio timeslot or the dynamic SDCCH/8 timeslot
in HR usage is busy by a multiband mobile station. A TCH radio timeslot (or a
dynamic SDCCH/8 timeslot) in HR usage is said busy by a multiband mobile
station when one or two HR sub-channels are busy by a multiband mobile
station. A MS is considered as multiband if it supports: - the P-GSM (or E-GSM
or R-GSM) and the DCS1800 bands if the PLMN_FREQUENCY_BANDS
parameter is set to "GSM900 and DCS1800 bands", or, - the GSM850 and
the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is set to
"GSM850 and DCS1800 bands", or, - the GSM850 and the DCS1900 bands if
the PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1900
bands", or, - the P-GSM (or E-GSM or R-GSM) and the DCS1900 bands if the
PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1900
bands".
Trigger condition
The counter cumulates, over the Accumulation Period, per radio timeslot,
all unit times during which the TCH HR channel (or the dynamic SDCCH/8
timeslot) is busy. For each channel allocation: 1) The counter starts being
incremented after the sending of the 48.058 CHANNEL ACTIVATION message
concerning : - an half rate TCH channel (or a dynamic SDCC/8 timeslot)
mapped either on the upper half or the lower half of the related TRX timeslot.
- a mobile which has sent a 44.018 CLASSMARK CHANGE message with
a "Mobile Station Classmark 3" Information Element field specifying that it
is a multiband MS. the MS supports: - the P-GSM (or E-GSM or R-GSM)
and the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is
set to "GSM900 and DCS1800 bands", or, - the GSM850 and the DCS1800
bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM850
and DCS1800 bands", or, - the GSM850 and the DCS1900 bands if the
PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1900
bands", or, - the P-GSM (or E-GSM or R-GSM) and the DCS1900 bands if the
PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1900
bands". 2) The counter stops being incremented when no HR sub-channel
(or the dynamic SDCCH/8 timeslot) concerning a multiband mobile is active
anymore on the related TRX channel. This is after the reception of a 48.058
RF CHANNEL RELEASE ACKNOWLEDGE message or the expiry of timer
T_RCR_ACK twice (after the sending of the 48.058 RF CHANNEL RELEASE
message) or the BSC internal radio resource release due to any BSS problem,
concerning the last HR TCH channel (or the dynamic SDCCH/8 timeslot) related
to a multiband mobile.
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Measured Object
TRX_TS
Type Name
Type Definition
Set of counters releated to the usage of the TCH channel (in HR or FR usage)
External Comment
127 / 1392
128 / 1392
129 / 1392
130 / 1392
6.2 Handover
6.2.1 All Handover
C220 - NB_INC_EXT_TCH_HO_REQ (Section 6.2.3.3.2.1 )
C221 - NB_INC_EXT_TCH_HO_ATPT (Section 6.2.3.3.2.2 )
C230 - NB_INC_INT_TCH_HO_REQ (Section 6.2.3.4.2.1 )
C231 - NB_INC_INT_TCH_HO_ATPT (Section 6.2.3.4.2.2 )
C270 - NB_INTRA_TCH_HO_REQ (Section 6.2.3.5.2.1 )
C271 - NB_INTRA_TCH_HO_ATPT (Section 6.2.3.5.2.2 )
C411 - NB_OUT_INT_TCH_HO_IDR_IN_ZONE_REQ (Section 6.2.3.7.2.1 )
131 / 1392
132 / 1392
6.2.2 SDCCH+TCH
6.2.2.1 All SDCCH+TCH
C440 - NB_TCH_HO_ATPT_23_TrafHandover (Section 6.2.2.2.2.1 )
6.2.2.2 Cause
6.2.2.2.1 All Cause
C440 - NB_TCH_HO_ATPT_23_TrafHandover (Section 6.2.2.2.2.1 )
133 / 1392
6.2.2.2.2
6.2.2.2.2.1 C440 - NB_TCH_HO_ATPT_23_TrafHandover
Long Name
NB_TCH_HO_ATPT_23_TrafHandover
Definition
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
134 / 1392
6.2.3 TCH
6.2.3.1 All TCH
C220 - NB_INC_EXT_TCH_HO_REQ (Section 6.2.3.3.2.1 )
C221 - NB_INC_EXT_TCH_HO_ATPT (Section 6.2.3.3.2.2 )
C230 - NB_INC_INT_TCH_HO_REQ (Section 6.2.3.4.2.1 )
C231 - NB_INC_INT_TCH_HO_ATPT (Section 6.2.3.4.2.2 )
C270 - NB_INTRA_TCH_HO_REQ (Section 6.2.3.5.2.1 )
C271 - NB_INTRA_TCH_HO_ATPT (Section 6.2.3.5.2.2 )
C411 - NB_OUT_INT_TCH_HO_IDR_IN_ZONE_REQ (Section 6.2.3.7.2.1 )
C412 - NB_OUT_INT_TCH_HO_IDR_IN_ZONE_EXEC_FAIL (Section
6.2.3.7.2.2 )
C41b - NB_INC_EXT_TCH_HO_PREP_FAIL_NO_TTCH (Section 6.2.3.3.2.3 )
C42 - NB_INC_EXT_TCH_HO_SUCC (Section 6.2.3.3.2.4 )
C43 - NB_INC_EXT_TCH_HO_EXEC_FAIL_MS_ACCESS (Section 6.2.3.3.2.5
)
C444 - NB_TCH_HO_ATPT_24_GenCaptureHandover (Section 6.2.3.2.2.1 )
C447 - NB_TCH_HO_ATPT_26_BadQualHR (Section 6.2.3.2.2.2 )
C448 - NB_TCH_HO_ATPT_27_GoodQualFR (Section 6.2.3.2.2.3 )
C449 - NB_TCH_HO_ATPT_28_FastTraffic (Section 6.2.3.2.2.4 )
C450 - NB_TCH_HO_ATPT_22_TooShortDistance (Section 6.2.3.2.2.5 )
C45a - NB_OUT_EXT_TCH_REAL_HO_REQ (Section 6.2.3.6.2.1 )
C46 - NB_OUT_EXT_TCH_HO_SUCC (Section 6.2.3.6.2.2 )
C460 - NB_TCH_HO_ALLOC_EMERGENCY_PRES (Section 6.2.3.2.2.6 )
C461 - NB_TCH_HO_ATPT_29_TFO (Section 6.2.3.2.2.7 )
C47 - NB_OUT_EXT_TCH_HO_EXEC_FAIL_REV (Section 6.2.3.6.2.3 )
C470 - NB_TCH_HO_ATPT_2_TooLowQualUp (Section 6.2.3.2.2.8 )
C471 - NB_TCH_HO_ATPT_3_TooLowLevUp (Section 6.2.3.2.2.9 )
C472 - NB_TCH_HO_ATPT_4_TooLowQualDown (Section 6.2.3.2.2.10 )
C473 - NB_TCH_HO_ATPT_5_TooLowLevDown (Section 6.2.3.2.2.11 )
C474 - NB_TCH_HO_ATPT_6_TooLongDistance (Section 6.2.3.2.2.12 )
C476 - NB_TCH_HO_ATPT_15_TooHighLevInterfUp (Section 6.2.3.2.2.13 )
C477 - NB_TCH_HO_ATPT_16_TooHighLevInterfDown (Section 6.2.3.2.2.14 )
C478 - NB_TCH_HO_ATPT_12_TooLowPowBudg (Section 6.2.3.2.2.15 )
C479 - NB_TCH_HO_ATPT_21_HighLevNeigCellPrefBand (Section
6.2.3.2.2.16 )
C48 - NB_OUT_EXT_TCH_HO_EXEC_FAIL_NO_REV (Section 6.2.3.6.2.4 )
C50 - NB_OUT_EXT_TCH_HO_ATPT (Section 6.2.3.6.2.5 )
C52 - NB_INC_INT_TCH_HO_SUCC (Section 6.2.3.4.2.3 )
C53 - NB_INC_INT_TCH_HO_EXEC_FAIL_MS_ACCESS (Section 6.2.3.4.2.4
)
135 / 1392
6.2.3.2 Cause
6.2.3.2.1 All Cause
C444 - NB_TCH_HO_ATPT_24_GenCaptureHandover (Section 6.2.3.2.2.1 )
C447 - NB_TCH_HO_ATPT_26_BadQualHR (Section 6.2.3.2.2.2 )
C448 - NB_TCH_HO_ATPT_27_GoodQualFR (Section 6.2.3.2.2.3 )
C449 - NB_TCH_HO_ATPT_28_FastTraffic (Section 6.2.3.2.2.4 )
C450 - NB_TCH_HO_ATPT_22_TooShortDistance (Section 6.2.3.2.2.5 )
C460 - NB_TCH_HO_ALLOC_EMERGENCY_PRES (Section 6.2.3.2.2.6 )
C461 - NB_TCH_HO_ATPT_29_TFO (Section 6.2.3.2.2.7 )
C470 - NB_TCH_HO_ATPT_2_TooLowQualUp (Section 6.2.3.2.2.8 )
C471 - NB_TCH_HO_ATPT_3_TooLowLevUp (Section 6.2.3.2.2.9 )
C472 - NB_TCH_HO_ATPT_4_TooLowQualDown (Section 6.2.3.2.2.10 )
136 / 1392
6.2.3.2.2
6.2.3.2.2.1 C444 - NB_TCH_HO_ATPT_24_GenCaptureHandover
Long Name
NB_TCH_HO_ATPT_24_GenCaptureHandover
Definition
Number of inter-cell internal or external handover attempts, with the cause 24:
"general capture handover" on a TCH channel (in HR or FR usage).
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
137 / 1392
NB_TCH_HO_ATPT_26_BadQualHR
Definition
Number of intracell handover attempts, with the cause 26: "HR to FR channel
adaptation due to bad radio quality" on a TCH channel.
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
138 / 1392
NB_TCH_HO_ATPT_27_GoodQualFR
Definition
Number of intracell handover attempts, with the cause 27: "FR to HR channel
adaptation due to good radio quality" on a TCH channel.
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
139 / 1392
NB_TCH_HO_ATPT_28_FastTraffic
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
140 / 1392
NB_TCH_HO_ATPT_22_TooShortDistance
Definition
Number of inter-cell internal or external handovers attempts, with cause 22: "too
short MS-BTS distance" on a TCH channel (in HR or FR usage). Only the outer
zones of extended cells are concerned by this counter.
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
141 / 1392
NB_TCH_HO_ALLOC_EMERGENCY_PRES
Definition
Number of high priority TCH requests served when the number of free TCH
timeslots is less than or equal to NUM_TCH_EGNCY_HO.
Trigger condition
The counter is incremented on the serving cell whenever the 48.058 CHANNEL
ACTIVATION message allocating a TCH channel is sent and the following two
conditions are both fulfilled: 1) the TCH is allocated to serve i) an internal
handover Cause 2, 3, 4, 5, 6, 7, 10, 11, 12, 15, 16, 17, 18, 22, 27, or, ii) an
external handover Cause "Uplink quality", "Uplink strength", "Downlink quality",
"Downlink strength", "Distance", or iii) a normal assignment or an external
handover with the preemption indicator set (i.e. Preemption Capability Indicator
= 1 and EN_TCH_PREEMPT = Enable). 2) the number of free TCH timeslots is
less than or equal to NUM_TCH_EGNCY_HO. Note 1: This counter counts both
inter-PLMN and intra-PLMN handover events. Note 2: The HMI name of the
parameter NUM_TCH_EGNCY_HO is "NUM_TCH_EMERGENCY_HO".
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
142 / 1392
NB_TCH_HO_ATPT_29_TFO
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
143 / 1392
NB_TCH_HO_ATPT_2_TooLowQualUp
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
144 / 1392
NB_TCH_HO_ATPT_3_TooLowLevUp
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
145 / 1392
NB_TCH_HO_ATPT_4_TooLowQualDown
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
146 / 1392
NB_TCH_HO_ATPT_5_TooLowLevDown
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
147 / 1392
NB_TCH_HO_ATPT_6_TooLongDistance
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
148 / 1392
NB_TCH_HO_ATPT_15_TooHighLevInterfUp
Definition
Number of intra-cell handover attempts, with cause 15: "too high level
interference on uplink" on a TCH channel (in HR or FR usage). This counter
takes into account handovers from TCH in traffic or in signaling mode.
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
149 / 1392
NB_TCH_HO_ATPT_16_TooHighLevInterfDown
Definition
Number of intra-cell handover attempts, with cause 16: "too high level
interference on downlink" on a TCH channel (in HR or FR usage). This counter
takes into account handovers from TCH in traffic or in signaling mode.
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
150 / 1392
NB_TCH_HO_ATPT_12_TooLowPowBudg
Definition
Number of inter-cell internal or external handover attempts, with cause 12: "too
low power budget" on a TCH channel (in FR or FR usage). This counter takes
into account handovers from TCH in traffic or in signaling mode.
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
151 / 1392
NB_TCH_HO_ATPT_21_HighLevNeigCellPrefBand
Definition
Number of inter-cell internal or external handover attempts, with cause 21: "high
level in neighbour cell in the preferred band" on a TCH channel (in HR or FR
usage). This counter is related to multiband.
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
152 / 1392
NB_TCH_HO_ATPT_7_ConsBadSACCHmicroCell
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
153 / 1392
NB_TCH_HO_ATPT_17_TooLowLevUpMicroCell
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
154 / 1392
NB_TCH_HO_ATPT_18_TooLowLevDownMicroCell
Definition
Number of inter-cell internal or external handovers attempts, with cause 18: "too
low level on the downlink in a microcell compared to a high threshold" on a
TCH channel (in HR or FR usage). This counter takes into account handovers
from TCH in traffic or in signaling mode. This counter is related to micro cell
environment.
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
155 / 1392
NB_TCH_HO_ATPT_14_HighLevNeigLowCellSlowMS
Definition
Number of inter-cell internal or external handover attempts, with cause 14: "high
level in neighbour lower layer for slow mobile" on a TCH channel (in HR or FR
usage). This counter is related to micro cell environment.
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
156 / 1392
NB_TCH_HO_ATPT_10_TooLowLevUpInZone
Definition
Number of intra-cell handover attempts, with cause 10 "Inner zone uplink level
too low" on TCH channel (in HR or FR usage). This counter is related to
concentric cell environment.
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
157 / 1392
NB_TCH_HO_ATPT_11_TooLowLevDownInZone
Definition
Number of intra-cell handover attempts, with cause 11: "Inner zone downlink
level too low" on TCH channel (in HR or FR usage). This counter is related to
concentric cell environment.
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
158 / 1392
NB_TCH_HO_ATPT_13_TooHighLevUpDownOutZone
Definition
Number of intra-cell handover attempts, with cause 13: "Outer zone uplink and
downlink levels too high" on TCH channel (in HR or FR usage). This counter is
related to concentric cell environment.
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
159 / 1392
NB_TCH_HO_MSC_TRIG
Definition
Number of external handovers triggered by the MSC but not required by the BSS.
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
160 / 1392
6.2.3.3.2
6.2.3.3.2.1 C220 - NB_INC_EXT_TCH_HO_REQ
Long Name
NB_INC_EXT_TCH_HO_REQ
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
161 / 1392
NB_INC_EXT_TCH_HO_ATPT
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
162 / 1392
NB_INC_EXT_TCH_HO_PREP_FAIL_NO_TTCH
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
163 / 1392
NB_INC_EXT_TCH_HO_SUCC
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
164 / 1392
NB_INC_EXT_TCH_HO_EXEC_FAIL_MS_ACCESS
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
165 / 1392
NB_INC_EXT_TCH_HO_PREP_FAIL_R_ABIS
Definition
Trigger condition
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Sub Domain 1
TCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
166 / 1392
NB_INC_EXT_TCH_HO_PREP_FAIL_CONG_R_ABIS
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
167 / 1392
6.2.3.4.2
6.2.3.4.2.1 C230 - NB_INC_INT_TCH_HO_REQ
Long Name
NB_INC_INT_TCH_HO_REQ
Definition
Trigger condition
Whenever the BSC process responsible for the handover procedure selects a
target cell (among a list of target cells) for internal inter cell TCH handover.
Sub Domain 1
TCH
Sub Domain 2
Incoming Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
168 / 1392
NB_INC_INT_TCH_HO_ATPT
Definition
Trigger condition
44.018HANDOVER COMMAND is sent to the serving BTS for internal inter cell
TCH handover. However, the counter is incremented in the TARGET cell, based
on the target cell ID indicated by the HO Command message,
Sub Domain 1
TCH
Sub Domain 2
Incoming Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
169 / 1392
NB_INC_INT_TCH_HO_SUCC
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Incoming Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
170 / 1392
NB_INC_INT_TCH_HO_EXEC_FAIL_MS_ACCESS
Definition
Trigger condition
Whenever the timer supervising the handover procedure (T3103) expires during
an internal inter-cell TCH handover.
Sub Domain 1
TCH
Sub Domain 2
Incoming Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
171 / 1392
NB_INC_INT_TCH_HO_PREP_FAIL_CONG_R_ABIS
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Incoming Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
172 / 1392
6.2.3.5 Intra
6.2.3.5.1 All Intra
C270 - NB_INTRA_TCH_HO_REQ (Section 6.2.3.5.2.1 )
C271 - NB_INTRA_TCH_HO_ATPT (Section 6.2.3.5.2.2 )
C561 - NB_INTRA_TCH_HO_PREP_FAIL_CONG_R_ABIS (Section
6.2.3.5.2.3 )
C62 - NB_INTRA_TCH_HO_SUCC (Section 6.2.3.5.2.4 )
C63 - NB_INTRA_TCH_HO_EXEC_FAIL_NO_REV (Section 6.2.3.5.2.5 )
C67 - NB_INTRA_TCH_HO_EXEC_FAIL_REV (Section 6.2.3.5.2.6 )
6.2.3.5.2
6.2.3.5.2.1 C270 - NB_INTRA_TCH_HO_REQ
Long Name
NB_INTRA_TCH_HO_REQ
Definition
Number of intra cell TCH (in HR or FR usage) handover requests. This counter
takes into account handovers from TCH in traffic or in signaling mode. It does
not take into account DTM Assignments.
Trigger condition
Whenever the BSC process responsible for the handover procedure starts an
intra cell TCH handover procedure.
Sub Domain 1
TCH
Sub Domain 2
Intra
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
173 / 1392
NB_INTRA_TCH_HO_ATPT
Definition
Number of intra cell TCH (in HR or FR usage) handover attempts. This counter
takes into account handovers from TCH in traffic or in signaling mode. It does
not take into account DTM Assignments.
Trigger condition
44.018 ASSIGNMENT COMMAND is sent to the BTS for intra cell handover
on TCH.
Sub Domain 1
TCH
Sub Domain 2
Intra
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
174 / 1392
NB_INTRA_TCH_HO_PREP_FAIL_CONG_R_ABIS
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Intra
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
175 / 1392
NB_INTRA_TCH_HO_SUCC
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Intra
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
176 / 1392
NB_INTRA_TCH_HO_EXEC_FAIL_NO_REV
Definition
Trigger condition
Whenever the timer supervising the handover procedure (T3107) expires during
an internal intra-cell.
Sub Domain 1
TCH
Sub Domain 2
Intra
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
177 / 1392
NB_INTRA_TCH_HO_EXEC_FAIL_REV
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Intra
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
178 / 1392
6.2.3.6.2
6.2.3.6.2.1 C45a - NB_OUT_EXT_TCH_REAL_HO_REQ
Long Name
NB_OUT_EXT_TCH_REAL_HO_REQ
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
179 / 1392
NB_OUT_EXT_TCH_HO_SUCC
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
180 / 1392
NB_OUT_EXT_TCH_HO_EXEC_FAIL_REV
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
181 / 1392
NB_OUT_EXT_TCH_HO_EXEC_FAIL_NO_REV
Definition
Trigger condition
Whenever the timer supervising the handover procedure on the serving cell
(T8), expires during an external TCH handover, except if a 48.008 CLEAR
COMMAND with "normal event/call control" cause was received from the MSC,
leading to a normal call release. In such a case, the handover is considered
as successful. Note: This counter counts both inter-PLMN and intra-PLMN
handover events. Note: This counter does not count handover to UMTS
Sub Domain 1
TCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
182 / 1392
NB_OUT_EXT_TCH_HO_ATPT
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
183 / 1392
6.2.3.7.2
6.2.3.7.2.1 C411 - NB_OUT_INT_TCH_HO_IDR_IN_ZONE_REQ
Long Name
NB_OUT_INT_TCH_HO_IDR_IN_ZONE_REQ
Definition
Trigger condition
Whenever the BSC process responsible for the handover procedure at the
serving cell generates an HO alarm towards the inner zone of a target concentric
cell for internal inter-cell TCH handover, or for an internal directed retry.
Sub Domain 1
TCH
Sub Domain 2
Outgoing Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
184 / 1392
NB_OUT_INT_TCH_HO_IDR_IN_ZONE_EXEC_FAIL
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Outgoing Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
185 / 1392
NB_OUT_INT_TCH_HO_REQ
Definition
Trigger condition
Whenever the BSC process responsible for the handover procedure selects a
target cell (among a list of target cells) for internal inter cell TCH handover.
Sub Domain 1
TCH
Sub Domain 2
Outgoing Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
186 / 1392
NB_OUT_INT_TCH_HO_SUCC
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Outgoing Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
187 / 1392
NB_OUT_INT_TCH_HO_EXEC_FAIL_REV
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Outgoing Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
188 / 1392
NB_OUT_INT_TCH_HO_EXEC_FAIL_NO_REV
Definition
Trigger condition
Whenever the timer supervising the handover procedure (T3103) expires during
an internal inter-cell TCH handover.
Sub Domain 1
TCH
Sub Domain 2
Outgoing Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
189 / 1392
NB_OUT_INT_TCH_HO_ATPT
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Outgoing Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
190 / 1392
6.3.2.2.2
6.3.2.2.2.1 C413 - NB_TCH_NOR_ASS_INNER_ZONE_ALLOC
Long Name
NB_TCH_NOR_ASS_INNER_ZONE_ALLOC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the TCH handover procedure. The counters are
provided per handover category : incoming and outgoing, internal (inter-cell and
intra-cell) and external. The handover causes are also provided.
External Comment
191 / 1392
192 / 1392
193 / 1392
7.2.2 Interface
7.2.2.1 All Interface
L1.12 - NB_LAPD_CRC_ERROR (Section 7.2.2.2.2.1 )
L1.15 - NB_LAPD_INFO_FRAME_RESENT (Section 7.2.2.2.2.2 )
L1.17 - NB_LAPD_EST (Section 7.2.2.2.2.3 )
L1.18 - TIME_LAPD_CONG (Section 7.2.2.2.2.4 )
L1.5 - NB_LAPD_RNR_SENT (Section 7.2.2.2.2.5 )
L1.6 - NB_LAPD_RNR_REC (Section 7.2.2.2.2.6 )
7.2.2.2 Abis
7.2.2.2.1 All Abis
L1.12 - NB_LAPD_CRC_ERROR (Section 7.2.2.2.2.1 )
L1.15 - NB_LAPD_INFO_FRAME_RESENT (Section 7.2.2.2.2.2 )
L1.17 - NB_LAPD_EST (Section 7.2.2.2.2.3 )
L1.18 - TIME_LAPD_CONG (Section 7.2.2.2.2.4 )
L1.5 - NB_LAPD_RNR_SENT (Section 7.2.2.2.2.5 )
L1.6 - NB_LAPD_RNR_REC (Section 7.2.2.2.2.6 )
194 / 1392
7.2.2.2.2 LapD
7.2.2.2.2.1 L1.12 - NB_LAPD_CRC_ERROR
Long Name
NB_LAPD_CRC_ERROR
Definition
Trigger condition
Whenever the HDLC Formatter handling the Physical LAPD link detects a CRC
error in a received Frame. Note 1: In case of LapD over UDP, this counter is
meaningless and shall always be set to 0.
Sub Domain 1
Interface
Sub Domain 2
Abis
Sub Domain 3
LapD
Measured Object
LapD
Type Name
LapD measurements
Type Definition
External Comment
195 / 1392
NB_LAPD_INFO_FRAME_RESENT
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Abis
Sub Domain 3
LapD
Measured Object
LapD
Type Name
LapD measurements
Type Definition
External Comment
196 / 1392
NB_LAPD_EST
Definition
Number of data link establishment, re-establishment and reset on the LapD link.
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Abis
Sub Domain 3
LapD
Measured Object
LapD
Type Name
LapD measurements
Type Definition
External Comment
197 / 1392
TIME_LAPD_CONG
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Abis
Sub Domain 3
LapD
Measured Object
LapD
Type Name
LapD measurements
Type Definition
External Comment
198 / 1392
NB_LAPD_RNR_SENT
Definition
Number of Receive Not Ready (RNR) frames transmitted on the LapD link.
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Abis
Sub Domain 3
LapD
Measured Object
LapD
Type Name
LapD measurements
Type Definition
External Comment
199 / 1392
NB_LAPD_RNR_REC
Definition
Number of Receive Not Ready (RNR) frames received on the LapD link.
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Abis
Sub Domain 3
LapD
Measured Object
LapD
Type Name
LapD measurements
Type Definition
External Comment
200 / 1392
7.3.2 Interface
7.3.2.1 All Interface
L1.16 - TIME_LAPD_UNAVAIL (Section 7.3.2.2.2.1 )
7.3.2.2 Abis
7.3.2.2.1 All Abis
L1.16 - TIME_LAPD_UNAVAIL (Section 7.3.2.2.2.1 )
7.3.2.2.2 Availability
7.3.2.2.2.1 L1.16 - TIME_LAPD_UNAVAIL
Long Name
TIME_LAPD_UNAVAIL
Definition
Time (in seconds) during which the LapD link is unavailable for any cause.
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Abis
Sub Domain 3
Availability
Measured Object
LapD
Type Name
LapD measurements
Type Definition
External Comment
201 / 1392
7.4.2 Interface
7.4.2.1 All Interface
L1.1 - NB_LAPD_INFO_FRAME_SENT (Section 7.4.2.2.2.1 )
L1.2 - NB_LAPD_INFO_FRAME_REC (Section 7.4.2.2.2.2 )
7.4.2.2 Abis
7.4.2.2.1 All Abis
L1.1 - NB_LAPD_INFO_FRAME_SENT (Section 7.4.2.2.2.1 )
L1.2 - NB_LAPD_INFO_FRAME_REC (Section 7.4.2.2.2.2 )
7.4.2.2.2 LapD
7.4.2.2.2.1 L1.1 - NB_LAPD_INFO_FRAME_SENT
Long Name
NB_LAPD_INFO_FRAME_SENT
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Abis
Sub Domain 3
LapD
Measured Object
LapD
Type Name
LapD measurements
Type Definition
External Comment
202 / 1392
NB_LAPD_INFO_FRAME_REC
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Abis
Sub Domain 3
LapD
Measured Object
LapD
Type Name
LapD measurements
Type Definition
External Comment
203 / 1392
204 / 1392
205 / 1392
8.2.2 Interface
8.2.2.1 All Interface
X3.22 - NB_X25_INC_CALL_ABNORM_CLOSED (Section 8.2.2.2.2.1 )
X3.23 - NB_X25_OUT_CALL_ABNORM_CLOSED (Section 8.2.2.2.2.2 )
8.2.2.2 OMC-BSC
8.2.2.2.1 All OMC-BSC
X3.22 - NB_X25_INC_CALL_ABNORM_CLOSED (Section 8.2.2.2.2.1 )
X3.23 - NB_X25_OUT_CALL_ABNORM_CLOSED (Section 8.2.2.2.2.2 )
8.2.2.2.2 X25
8.2.2.2.2.1 X3.22 - NB_X25_INC_CALL_ABNORM_CLOSED
Long Name
NB_X25_INC_CALL_ABNORM_CLOSED
Definition
Number of incoming X.25 calls that are closed in an abnormal way, as seen
by the BSC.
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
OMC-BSC
Sub Domain 3
X25
Measured Object
X25
Type Name
X25 measurements
Type Definition
External Comment
206 / 1392
NB_X25_OUT_CALL_ABNORM_CLOSED
Definition
Number of outgoing X.25 calls that are closed in an abnormal way, as seen
by the BSC.
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
OMC-BSC
Sub Domain 3
X25
Measured Object
X25
Type Name
X25 measurements
Type Definition
External Comment
207 / 1392
8.3.2 Interface
8.3.2.1 All Interface
X3.20 - NB_X25_INC_CALL_SUCC_CLOSED (Section 8.3.2.2.2.1 )
X3.21 - NB_X25_OUT_CALL_SUCC_CLOSED (Section 8.3.2.2.2.2 )
8.3.2.2 OMC-BSC
8.3.2.2.1 All OMC-BSC
X3.20 - NB_X25_INC_CALL_SUCC_CLOSED (Section 8.3.2.2.2.1 )
X3.21 - NB_X25_OUT_CALL_SUCC_CLOSED (Section 8.3.2.2.2.2 )
8.3.2.2.2 X25
8.3.2.2.2.1 X3.20 - NB_X25_INC_CALL_SUCC_CLOSED
Long Name
NB_X25_INC_CALL_SUCC_CLOSED
Definition
Number of incoming X.25 calls that are successfully closed by the BSC.
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
OMC-BSC
Sub Domain 3
X25
Measured Object
X25
Type Name
X25 measurements
Type Definition
External Comment
208 / 1392
NB_X25_OUT_CALL_SUCC_CLOSED
Definition
Number of outgoing X.25 calls that are successfully closed by the BSC.
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
OMC-BSC
Sub Domain 3
X25
Measured Object
X25
Type Name
X25 measurements
Type Definition
External Comment
209 / 1392
210 / 1392
9 BSC-TYPE 9 - N7 measurements
9 BSC-TYPE 9 - N7 measurements
211 / 1392
9 BSC-TYPE 9 - N7 measurements
212 / 1392
9 BSC-TYPE 9 - N7 measurements
9.2.2 Interface
9.2.2.1 All Interface
N1.10 - NB_N7_CHANGEOVER (Section 9.2.2.2.2.1 )
N1.11 - NB_N7_CHANGEBACK (Section 9.2.2.2.2.2 )
N1.12 - NB_N7_RESTORATION (Section 9.2.2.2.2.3 )
N1.2 - NB_N7_LINK_FAIL_ANY_CAUSE (Section 9.2.2.2.2.4 )
N1.3 - NB_N7_LINK_FAIL_FIB_BSN (Section 9.2.2.2.2.5 )
N1.4 - NB_N7_LINK_FAIL_T7_EXP (Section 9.2.2.2.2.6 )
N1.5 - NB_N7_LINK_FAIL_SU_ERROR_RATE (Section 9.2.2.2.2.7 )
N1.6 - NB_N7_LINK_FAIL_CONG (Section 9.2.2.2.2.8 )
N1.7 - NB_N7_LINK_FAIL_ALIGNMENT (Section 9.2.2.2.2.9 )
N1.8 - NB_N7_SU_REC_WITH_ERROR (Section 9.2.2.2.2.10 )
N1.9 - NB_N7_NEG_ACK_REC (Section 9.2.2.2.2.11 )
N3.10 - NB_N7_MSU_DISC_DUE_CONG (Section 9.2.2.2.2.12 )
N3.11 - NB_N7_CONG_WITH_MSU_LOST (Section 9.2.2.2.2.13 )
9.2.2.2 A
9.2.2.2.1 All A
N1.10 - NB_N7_CHANGEOVER (Section 9.2.2.2.2.1 )
N1.11 - NB_N7_CHANGEBACK (Section 9.2.2.2.2.2 )
N1.12 - NB_N7_RESTORATION (Section 9.2.2.2.2.3 )
N1.2 - NB_N7_LINK_FAIL_ANY_CAUSE (Section 9.2.2.2.2.4 )
N1.3 - NB_N7_LINK_FAIL_FIB_BSN (Section 9.2.2.2.2.5 )
N1.4 - NB_N7_LINK_FAIL_T7_EXP (Section 9.2.2.2.2.6 )
N1.5 - NB_N7_LINK_FAIL_SU_ERROR_RATE (Section 9.2.2.2.2.7 )
N1.6 - NB_N7_LINK_FAIL_CONG (Section 9.2.2.2.2.8 )
N1.7 - NB_N7_LINK_FAIL_ALIGNMENT (Section 9.2.2.2.2.9 )
N1.8 - NB_N7_SU_REC_WITH_ERROR (Section 9.2.2.2.2.10 )
N1.9 - NB_N7_NEG_ACK_REC (Section 9.2.2.2.2.11 )
N3.10 - NB_N7_MSU_DISC_DUE_CONG (Section 9.2.2.2.2.12 )
N3.11 - NB_N7_CONG_WITH_MSU_LOST (Section 9.2.2.2.2.13 )
213 / 1392
9 BSC-TYPE 9 - N7 measurements
9.2.2.2.2 Layers1-2-3
9.2.2.2.2.1 N1.10 - NB_N7_CHANGEOVER
Long Name
NB_N7_CHANGEOVER
Definition
Trigger condition
Whenever a changeover is made from using the primary signalling link to the
secondary signalling link.
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Layers1-2-3
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
214 / 1392
9 BSC-TYPE 9 - N7 measurements
NB_N7_CHANGEBACK
Definition
Trigger condition
Whenever a change back is made from using the secondary signalling link
to the primary signalling link.
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Layers1-2-3
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
215 / 1392
9 BSC-TYPE 9 - N7 measurements
NB_N7_RESTORATION
Definition
Trigger condition
Whenever the No.7 Signalling channel between the MSC and BSS is correctly
aligned after the removal of a failure condition, this counter will be incremented.
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Layers1-2-3
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
216 / 1392
9 BSC-TYPE 9 - N7 measurements
NB_N7_LINK_FAIL_ANY_CAUSE
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Layers1-2-3
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
217 / 1392
9 BSC-TYPE 9 - N7 measurements
NB_N7_LINK_FAIL_FIB_BSN
Definition
Number of Forward Indicator Bits (FIB) and Backward Sequence Number (BSN)
on the N7 SL.
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Layers1-2-3
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
218 / 1392
9 BSC-TYPE 9 - N7 measurements
NB_N7_LINK_FAIL_T7_EXP
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Layers1-2-3
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
219 / 1392
9 BSC-TYPE 9 - N7 measurements
NB_N7_LINK_FAIL_SU_ERROR_RATE
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Layers1-2-3
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
220 / 1392
9 BSC-TYPE 9 - N7 measurements
NB_N7_LINK_FAIL_CONG
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Layers1-2-3
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
221 / 1392
9 BSC-TYPE 9 - N7 measurements
NB_N7_LINK_FAIL_ALIGNMENT
Definition
Trigger condition
Whenever the timer supervising the alignment of the Signalling Link (T2) expires.
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Layers1-2-3
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
222 / 1392
9 BSC-TYPE 9 - N7 measurements
NB_N7_SU_REC_WITH_ERROR
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Layers1-2-3
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
223 / 1392
9 BSC-TYPE 9 - N7 measurements
NB_N7_NEG_ACK_REC
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Layers1-2-3
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
224 / 1392
9 BSC-TYPE 9 - N7 measurements
NB_N7_MSU_DISC_DUE_CONG
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Layers1-2-3
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
225 / 1392
9 BSC-TYPE 9 - N7 measurements
NB_N7_CONG_WITH_MSU_LOST
Definition
Number of times one (or more) Message Signalling Units (MSU) are lost due
to congestion on the N7 SL.
Trigger condition
Whenever 1 or more MSUs are lost due to congestion on the signalling link.
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Layers1-2-3
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
226 / 1392
9 BSC-TYPE 9 - N7 measurements
9.3.2 Interface
9.3.2.1 All Interface
N1.1 - TIME_N7_ALIGNED (Section 9.3.2.2.2.1 )
N2.7 - TIME_N7_UNAVAIL_ERROR_SL (Section 9.3.2.2.2.2 )
N2.9 - TIME_N7_UNAVAIL_MSC_PROC_OUTAGE (Section 9.3.2.2.2.3 )
N3.7 - TIME_N7_UNAVAIL_CONG (Section 9.3.2.2.2.4 )
N4.2 - TIME_N7_UNAVAIL_LINK_SET (Section 9.3.2.2.2.5 )
9.3.2.2 A
9.3.2.2.1 All A
N1.1 - TIME_N7_ALIGNED (Section 9.3.2.2.2.1 )
N2.7 - TIME_N7_UNAVAIL_ERROR_SL (Section 9.3.2.2.2.2 )
N2.9 - TIME_N7_UNAVAIL_MSC_PROC_OUTAGE (Section 9.3.2.2.2.3 )
N3.7 - TIME_N7_UNAVAIL_CONG (Section 9.3.2.2.2.4 )
N4.2 - TIME_N7_UNAVAIL_LINK_SET (Section 9.3.2.2.2.5 )
227 / 1392
9 BSC-TYPE 9 - N7 measurements
9.3.2.2.2 Availability
9.3.2.2.2.1 N1.1 - TIME_N7_ALIGNED
Long Name
TIME_N7_ALIGNED
Definition
Trigger condition
Whenever the No.7 Signalling channel between the MSC and BSS is correctly
aligned, this counter will be incremented every second.
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Availability
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
228 / 1392
9 BSC-TYPE 9 - N7 measurements
TIME_N7_UNAVAIL_ERROR_SL
Definition
Time (in seconds) during which the N7 SL is not correctly aligned due to a
fault on the N7 SL.
Trigger condition
Whenever the No.7 Signalling channel between the MSC and BSS fails, until the
time when the fault has been removed and the link aligned, this counter will be
incremented every second.
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Availability
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
229 / 1392
9 BSC-TYPE 9 - N7 measurements
TIME_N7_UNAVAIL_MSC_PROC_OUTAGE
Definition
Time (in seconds) during which the N7 SL is not available due to a remote
MSC processor outage.
Trigger condition
Whenever the MSC indicates to the BSS that it is unable to process signalling
traffic due to an outage, this counter will be incremented every second.
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Availability
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
230 / 1392
9 BSC-TYPE 9 - N7 measurements
TIME_N7_UNAVAIL_CONG
Definition
Time (in seconds) during which the N7 SL is not available due to congestion.
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Availability
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
231 / 1392
9 BSC-TYPE 9 - N7 measurements
TIME_N7_UNAVAIL_LINK_SET
Definition
Time (in seconds) during which the Link Set towards the MSC is not available
on the N7.
Trigger condition
Whenever the Link Set towards the MSC is unavailable, this counter will be
updated every second.
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Availability
Measured Object
N7 Link Set
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
232 / 1392
9 BSC-TYPE 9 - N7 measurements
9.4.2 Interface
9.4.2.1 All Interface
N3.1 - NB_N7_SIF_SIO_SENT (Section 9.4.2.2.2.1 )
N3.2 - NB_N7_OCTETS_RESENT (Section 9.4.2.2.2.2 )
N3.3 - NB_N7_MSU_SENT (Section 9.4.2.2.2.3 )
N3.4 - NB_N7_SIF_SIO_REC (Section 9.4.2.2.2.4 )
N3.5 - NB_N7_MSU_REC (Section 9.4.2.2.2.5 )
9.4.2.2 A
9.4.2.2.1 All A
N3.1 - NB_N7_SIF_SIO_SENT (Section 9.4.2.2.2.1 )
N3.2 - NB_N7_OCTETS_RESENT (Section 9.4.2.2.2.2 )
N3.3 - NB_N7_MSU_SENT (Section 9.4.2.2.2.3 )
N3.4 - NB_N7_SIF_SIO_REC (Section 9.4.2.2.2.4 )
N3.5 - NB_N7_MSU_REC (Section 9.4.2.2.2.5 )
233 / 1392
9 BSC-TYPE 9 - N7 measurements
9.4.2.2.2 Layers1-2-3
9.4.2.2.2.1 N3.1 - NB_N7_SIF_SIO_SENT
Long Name
NB_N7_SIF_SIO_SENT
Definition
Trigger condition
When sending an MSU, this counter is incremented by the length of the SIF, plus
one for the SIO octet.
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Layers1-2-3
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
234 / 1392
9 BSC-TYPE 9 - N7 measurements
NB_N7_OCTETS_RESENT
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Layers1-2-3
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
235 / 1392
9 BSC-TYPE 9 - N7 measurements
NB_N7_MSU_SENT
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Layers1-2-3
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
236 / 1392
9 BSC-TYPE 9 - N7 measurements
NB_N7_SIF_SIO_REC
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Layers1-2-3
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
237 / 1392
9 BSC-TYPE 9 - N7 measurements
NB_N7_MSU_REC
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Layers1-2-3
Measured Object
N7 Signalling Link
Type Name
N7 measurements
Type Definition
Set of counters related to the N7 Signalling Links. Note that in the BSS context,
the Link Set and the Route Set are identical.
External Comment
238 / 1392
239 / 1392
240 / 1392
10.2.2 Interface
10.2.2.1 All Interface
C180a - NB_N7_CLEAR_REQ_RadioIntMessFail (Section 10.2.2.2.2.1 )
C180b - NB_N7_CLEAR_REQ_O&Minterv (Section 10.2.2.2.2.2 )
C180c - NB_N7_CLEAR_REQ_EquipFail (Section 10.2.2.2.2.3 )
C180d - NB_N7_CLEAR_REQ_RadioIntFail (Section 10.2.2.2.2.4 )
C180e - NB_N7_CLEAR_REQ_NoRadioResAvail (Section 10.2.2.2.2.5 )
C181a - NB_N7_ASS_FAIL_RadioIntMessFail (Section 10.2.2.2.2.6 )
C181b - NB_N7_ASS_FAIL_O&Minterv (Section 10.2.2.2.2.7 )
C181c - NB_N7_ASS_FAIL_EquipFail (Section 10.2.2.2.2.8 )
C181d - NB_N7_ASS_FAIL_NoRadioResAvail (Section 10.2.2.2.2.9 )
C181e - NB_N7_ASS_FAIL_ReqTerResUnav/Alloc (Section 10.2.2.2.2.10 )
C181f - NB_N7_ASS_FAIL_ReqTrans/RateUnav (Section 10.2.2.2.2.11 )
C181g - NB_N7_ASS_FAIL_RadioIntFailRevOldChan (Section 10.2.2.2.2.12 )
C181h - NB_N7_ASS_FAIL_RadioIntFail (Section 10.2.2.2.2.13 )
C181i - NB_N7_ASS_FAIL_CipherAlgoNotSupp (Section 10.2.2.2.2.14 )
C181j - NB_N7_ASS_FAIL_BSSnotEquip (Section 10.2.2.2.2.15 )
C181k - NB_N7_ASS_FAIL_ProtocolError (Section 10.2.2.2.2.16 )
C181l - NB_N7_ASS_FAIL_ReqSpeechVersUnav (Section 10.2.2.2.2.17 )
C182 - NB_N7_CLEAR_REQ_EST_PHAS (Section 10.2.2.2.2.18 )
10.2.2.2 A
10.2.2.2.1 All A
C180a - NB_N7_CLEAR_REQ_RadioIntMessFail (Section 10.2.2.2.2.1 )
C180b - NB_N7_CLEAR_REQ_O&Minterv (Section 10.2.2.2.2.2 )
C180c - NB_N7_CLEAR_REQ_EquipFail (Section 10.2.2.2.2.3 )
C180d - NB_N7_CLEAR_REQ_RadioIntFail (Section 10.2.2.2.2.4 )
C180e - NB_N7_CLEAR_REQ_NoRadioResAvail (Section 10.2.2.2.2.5 )
C181a - NB_N7_ASS_FAIL_RadioIntMessFail (Section 10.2.2.2.2.6 )
C181b - NB_N7_ASS_FAIL_O&Minterv (Section 10.2.2.2.2.7 )
C181c - NB_N7_ASS_FAIL_EquipFail (Section 10.2.2.2.2.8 )
C181d - NB_N7_ASS_FAIL_NoRadioResAvail (Section 10.2.2.2.2.9 )
C181e - NB_N7_ASS_FAIL_ReqTerResUnav/Alloc (Section 10.2.2.2.2.10 )
C181f - NB_N7_ASS_FAIL_ReqTrans/RateUnav (Section 10.2.2.2.2.11 )
C181g - NB_N7_ASS_FAIL_RadioIntFailRevOldChan (Section 10.2.2.2.2.12 )
241 / 1392
10.2.2.2.2 BSSAP
10.2.2.2.2.1 C180a - NB_N7_CLEAR_REQ_RadioIntMessFail
Long Name
NB_N7_CLEAR_REQ_RadioIntMessFail
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
BSSAP
Measured Object
BSC
Type Name
A interface measurements
Type Definition
External Comment
242 / 1392
NB_N7_CLEAR_REQ_O&Minterv
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
BSSAP
Measured Object
BSC
Type Name
A interface measurements
Type Definition
External Comment
243 / 1392
NB_N7_CLEAR_REQ_EquipFail
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
BSSAP
Measured Object
BSC
Type Name
A interface measurements
Type Definition
External Comment
244 / 1392
NB_N7_CLEAR_REQ_RadioIntFail
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
BSSAP
Measured Object
BSC
Type Name
A interface measurements
Type Definition
External Comment
245 / 1392
NB_N7_CLEAR_REQ_NoRadioResAvail
Definition
Trigger condition
Whenever a 48.008 CLEAR REQUEST message with a cause value of "no radio
resource available" is sent on A interface to the MSC.
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
BSSAP
Measured Object
BSC
Type Name
A interface measurements
Type Definition
External Comment
246 / 1392
NB_N7_ASS_FAIL_RadioIntMessFail
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
BSSAP
Measured Object
BSC
Type Name
A interface measurements
Type Definition
External Comment
247 / 1392
NB_N7_ASS_FAIL_O&Minterv
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
BSSAP
Measured Object
BSC
Type Name
A interface measurements
Type Definition
External Comment
248 / 1392
NB_N7_ASS_FAIL_EquipFail
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
BSSAP
Measured Object
BSC
Type Name
A interface measurements
Type Definition
External Comment
249 / 1392
NB_N7_ASS_FAIL_NoRadioResAvail
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
BSSAP
Measured Object
BSC
Type Name
A interface measurements
Type Definition
External Comment
250 / 1392
NB_N7_ASS_FAIL_ReqTerResUnav/Alloc
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
BSSAP
Measured Object
BSC
Type Name
A interface measurements
Type Definition
External Comment
251 / 1392
NB_N7_ASS_FAIL_ReqTrans/RateUnav
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
BSSAP
Measured Object
BSC
Type Name
A interface measurements
Type Definition
External Comment
252 / 1392
NB_N7_ASS_FAIL_RadioIntFailRevOldChan
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
BSSAP
Measured Object
BSC
Type Name
A interface measurements
Type Definition
External Comment
253 / 1392
NB_N7_ASS_FAIL_RadioIntFail
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
BSSAP
Measured Object
BSC
Type Name
A interface measurements
Type Definition
External Comment
254 / 1392
NB_N7_ASS_FAIL_CipherAlgoNotSupp
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
BSSAP
Measured Object
BSC
Type Name
A interface measurements
Type Definition
External Comment
255 / 1392
NB_N7_ASS_FAIL_BSSnotEquip
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
BSSAP
Measured Object
BSC
Type Name
A interface measurements
Type Definition
External Comment
256 / 1392
NB_N7_ASS_FAIL_ProtocolError
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
BSSAP
Measured Object
BSC
Type Name
A interface measurements
Type Definition
External Comment
257 / 1392
NB_N7_ASS_FAIL_ReqSpeechVersUnav
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
BSSAP
Measured Object
BSC
Type Name
A interface measurements
Type Definition
External Comment
258 / 1392
NB_N7_CLEAR_REQ_EST_PHAS
Definition
Number of 48.008 CLEAR REQUEST sent to the MSC for calls in TCH
established phase, and for internal inter-cell and external TCH handover failures.
Intra-cell handover failures are not taken into account. This counter takes into
account TCH in traffic mode or in signaling mode.
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
BSSAP
Measured Object
BSC
Type Name
A interface measurements
Type Definition
External Comment
259 / 1392
10.3.2 Interface
10.3.2.1 All Interface
C750 - TIME_A_CHANNEL_BUSY (Section 10.3.2.2.2.1 )
C751 - NB_A_CHANNEL_ALLOC (Section 10.3.2.2.2.2 )
10.3.2.2 A
10.3.2.2.1 All A
C750 - TIME_A_CHANNEL_BUSY (Section 10.3.2.2.2.1 )
C751 - NB_A_CHANNEL_ALLOC (Section 10.3.2.2.2.2 )
10.3.2.2.2
10.3.2.2.2.1 C750 - TIME_A_CHANNEL_BUSY
Long Name
TIME_A_CHANNEL_BUSY
Definition
Trigger condition
The counter cumulates over the Accumulation Period, all unit times during which
the A channel is busy. For each channel allocation: 1) The counter starts being
incremented when the A channel is activated (see C751) 2) The counter stops
being incremented when the A channel is deallocated after the reception of a
48.058 RF CHANNEL RELEASE ACKNOWLEDGE message or the expiry
of timer T_RCR_ACK twice (after the sending of the 48.058 RF CHANNEL
RELEASE message).
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Measured Object
A interface channel
Type Name
A interface measurements
Type Definition
External Comment
260 / 1392
NB_A_CHANNEL_ALLOC
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Measured Object
A interface channel
Type Name
A interface measurements
Type Definition
External Comment
261 / 1392
262 / 1392
263 / 1392
264 / 1392
11.2.2.2.2 Failure
11.2.2.2.2.1 C194a - NB_SMS_PP_CON_REJ_RadioIntFail
Long Name
NB_SMS_PP_CON_REJ_RadioIntFail
Definition
Number of SMS connection rejections by the BSC with the cause "radio
interface failure".
Trigger condition
Whenever a 48.008 SAPI "n" REJECT message related to SAPI 3 is sent from
BSC to MSC with a cause value of "radio interface failure".
Sub Domain 1
Sub Domain 2
Point to Point
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
SMS PP measurements
Type Definition
Set of counters related to the Short Message Service Point to Point. The SMS
transactions on SDCCH and SACCH channels, originating or terminating, are
counted.
External Comment
265 / 1392
NB_SMS_PP_CON_REJ_BSSnotEquip
Definition
Number of SMS connection rejections by the BSC with the cause "BSS not
equipped",
Trigger condition
Whenever a 48.008 SAPI "n" REJECT message related to SAPI 3 with a cause
value of "BSS not equipped" is sent on A interface from BSC to MSC.
Sub Domain 1
Sub Domain 2
Point to Point
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
SMS PP measurements
Type Definition
Set of counters related to the Short Message Service Point to Point. The SMS
transactions on SDCCH and SACCH channels, originating or terminating, are
counted.
External Comment
266 / 1392
NB_SMS_PP_CON_REJ_ProtocolError
Definition
Number of SMS connection rejections by the BSC with the cause "protocol
error between BSC and MSC".
Trigger condition
Whenever a 48.008 SAPI "n" REJECT message related to SAPI 3 with a cause
value of "protocol error between BSC and MSC" is sent on A interface from
BSC to MSC.
Sub Domain 1
Sub Domain 2
Point to Point
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
SMS PP measurements
Type Definition
Set of counters related to the Short Message Service Point to Point. The SMS
transactions on SDCCH and SACCH channels, originating or terminating, are
counted.
External Comment
267 / 1392
NB_SMS_PP_CON_REL_LAPDM_ERROR
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Point to Point
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
SMS PP measurements
Type Definition
Set of counters related to the Short Message Service Point to Point. The SMS
transactions on SDCCH and SACCH channels, originating or terminating, are
counted.
External Comment
268 / 1392
11.2.2.2.3 Success
11.2.2.2.3.1 C190 - NB_SMS_PP_CON_MO_SDCCH
Long Name
NB_SMS_PP_CON_MO_SDCCH
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Point to Point
Sub Domain 3
Success
Measured Object
Common cell
Type Name
SMS PP measurements
Type Definition
Set of counters related to the Short Message Service Point to Point. The SMS
transactions on SDCCH and SACCH channels, originating or terminating, are
counted.
External Comment
269 / 1392
NB_SMS_PP_CON_MT_SDCCH
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Point to Point
Sub Domain 3
Success
Measured Object
Common cell
Type Name
SMS PP measurements
Type Definition
Set of counters related to the Short Message Service Point to Point. The SMS
transactions on SDCCH and SACCH channels, originating or terminating, are
counted.
External Comment
270 / 1392
NB_SMS_PP_CON_MO_SACCH
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Point to Point
Sub Domain 3
Success
Measured Object
Common cell
Type Name
SMS PP measurements
Type Definition
Set of counters related to the Short Message Service Point to Point. The SMS
transactions on SDCCH and SACCH channels, originating or terminating, are
counted.
External Comment
271 / 1392
NB_SMS_PP_CON_MT_SACCH
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Point to Point
Sub Domain 3
Success
Measured Object
Common cell
Type Name
SMS PP measurements
Type Definition
Set of counters related to the Short Message Service Point to Point. The SMS
transactions on SDCCH and SACCH channels, originating or terminating, are
counted.
External Comment
272 / 1392
273 / 1392
12.2.2 Interface
12.2.2.1 All Interface
C153a - NB_N7_CON_EST_FAIL_DUE_NSS (Section 12.2.2.2.2.1 )
C153b - NB_N7_CON_EST_FAIL_DUE_BSS (Section 12.2.2.2.2.2 )
C257 - NB_N7_CON_REF_SENT (Section 12.2.2.2.2.3 )
C258 - NB_N7_CON_REF_REC (Section 12.2.2.2.2.4 )
12.2.2.2 A
12.2.2.2.1 All A
C153a - NB_N7_CON_EST_FAIL_DUE_NSS (Section 12.2.2.2.2.1 )
C153b - NB_N7_CON_EST_FAIL_DUE_BSS (Section 12.2.2.2.2.2 )
C257 - NB_N7_CON_REF_SENT (Section 12.2.2.2.2.3 )
C258 - NB_N7_CON_REF_REC (Section 12.2.2.2.2.4 )
274 / 1392
12.2.2.2.2 SCCP
12.2.2.2.2.1 C153a - NB_N7_CON_EST_FAIL_DUE_NSS
Long Name
NB_N7_CON_EST_FAIL_DUE_NSS
Definition
Trigger condition
1) CREF received. 2) RLSD received for a connection that was not established
(this could indicate that the Connection Confirm from the MSC was not received).
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
SCCP
Measured Object
N7 Signalling Link
Type Name
SCCP measurements
Type Definition
External Comment
275 / 1392
NB_N7_CON_EST_FAIL_DUE_BSS
Definition
Trigger condition
N_DISC_REQ received from BSSAP for a connection that was not yet
established.
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
SCCP
Measured Object
N7 Signalling Link
Type Name
SCCP measurements
Type Definition
External Comment
276 / 1392
NB_N7_CON_REF_SENT
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
SCCP
Measured Object
N7 Signalling Link
Type Name
SCCP measurements
Type Definition
External Comment
277 / 1392
NB_N7_CON_REF_REC
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
SCCP
Measured Object
N7 Signalling Link
Type Name
SCCP measurements
Type Definition
External Comment
278 / 1392
12.3.2 Interface
12.3.2.1 All Interface
C251 - NB_N7_UNIT_DATA_SENT (Section 12.3.2.2.2.1 )
C252 - NB_N7_UNIT_DATA_REC (Section 12.3.2.2.2.2 )
C253 - NB_N7_CON_REQ_SENT (Section 12.3.2.2.2.3 )
C254 - NB_N7_CON_REQ_REC (Section 12.3.2.2.2.4 )
C255 - NB_N7_CON_CONF_SENT (Section 12.3.2.2.2.5 )
C256 - NB_N7_CON_CONF_REC (Section 12.3.2.2.2.6 )
12.3.2.2 A
12.3.2.2.1 All A
C251 - NB_N7_UNIT_DATA_SENT (Section 12.3.2.2.2.1 )
C252 - NB_N7_UNIT_DATA_REC (Section 12.3.2.2.2.2 )
C253 - NB_N7_CON_REQ_SENT (Section 12.3.2.2.2.3 )
C254 - NB_N7_CON_REQ_REC (Section 12.3.2.2.2.4 )
C255 - NB_N7_CON_CONF_SENT (Section 12.3.2.2.2.5 )
C256 - NB_N7_CON_CONF_REC (Section 12.3.2.2.2.6 )
279 / 1392
12.3.2.2.2 SCCP
12.3.2.2.2.1 C251 - NB_N7_UNIT_DATA_SENT
Long Name
NB_N7_UNIT_DATA_SENT
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
SCCP
Measured Object
N7 Signalling Link
Type Name
SCCP measurements
Type Definition
External Comment
280 / 1392
NB_N7_UNIT_DATA_REC
Definition
Number of connectionless Unit Data messages class 0 received from the MSC.
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
SCCP
Measured Object
N7 Signalling Link
Type Name
SCCP measurements
Type Definition
External Comment
281 / 1392
NB_N7_CON_REQ_SENT
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
SCCP
Measured Object
N7 Signalling Link
Type Name
SCCP measurements
Type Definition
External Comment
282 / 1392
NB_N7_CON_REQ_REC
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
SCCP
Measured Object
N7 Signalling Link
Type Name
SCCP measurements
Type Definition
External Comment
283 / 1392
NB_N7_CON_CONF_SENT
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
SCCP
Measured Object
N7 Signalling Link
Type Name
SCCP measurements
Type Definition
External Comment
284 / 1392
NB_N7_CON_CONF_REC
Definition
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
SCCP
Measured Object
N7 Signalling Link
Type Name
SCCP measurements
Type Definition
External Comment
285 / 1392
286 / 1392
287 / 1392
13.2 Adjacency
13.2.1 All Adjacency
C720 - NB_ADJ_SCELL_OUT_TCH_HO_ATPT (Section 13.2.2.2.2.1 )
C721 - NB_ADJ_SCELL_OUT_TCH_HO_SUCC (Section 13.2.2.2.2.2 )
C722 - NB_ADJ_SCELL_OUT_TCH_HO_EXEC_FAIL_REV (Section
13.2.2.2.2.3 )
C723 - NB_ADJ_SCELL_OUT_TCH_HO_EXEC_FAIL_NO_REV (Section
13.2.2.2.2.4 )
C724 - NB_ADJ_SCELL_OUT_TCH_HO_EMERGENCY_ATPT (Section
13.2.2.2.2.5 )
C725 - NB_ADJ_SCELL_OUT_TCH_HO_BETTERCELL_ATPT (Section
13.2.2.2.2.6 )
C727 - NB_ADJ_SCELL_OUT_TCH_HO_TRAFFIC_ATPT (Section
13.2.2.2.2.7 )
C728 - NB_ADJ_SCELL_OUT_ FORCED_DR_ATPT (Section 13.2.2.2.2.8 )
288 / 1392
13.2.2.2
13.2.2.2.1 All
13.2.2.2.2
13.2.2.2.2.1 C720 - NB_ADJ_SCELL_OUT_TCH_HO_ATPT
Long Name
NB_ADJ_SCELL_OUT_TCH_HO_ATPT
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Adjacency-CGI
Type Name
Type Definition
External Comment
289 / 1392
NB_ADJ_SCELL_OUT_TCH_HO_SUCC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Adjacency-CGI
Type Name
Type Definition
External Comment
290 / 1392
NB_ADJ_SCELL_OUT_TCH_HO_EXEC_FAIL_REV
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Adjacency-CGI
Type Name
Type Definition
External Comment
291 / 1392
NB_ADJ_SCELL_OUT_TCH_HO_EXEC_FAIL_NO_REV
Definition
Trigger condition
1) Internal handover: whenever the timer supervising the internal inter-cell TCH
handover procedure (T3103) from the fixed serving cell to the variable target cell
expires. 2) External handover: whenever the timer supervising the external TCH
handover procedure (T8) from the fixed serving cell to the variable target cell
expires, except if a 48.008 CLEAR COMMAND with "normal event/call control"
cause was received from the MSC, leading to a normal call release. In such a
case, the handover is considered as successful. Note: This counter counts both
inter-PLMN and intra-PLMN handover events.
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Adjacency-CGI
Type Name
Type Definition
External Comment
292 / 1392
NB_ADJ_SCELL_OUT_TCH_HO_EMERGENCY_ATPT
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Adjacency-CGI
Type Name
Type Definition
External Comment
293 / 1392
NB_ADJ_SCELL_OUT_TCH_HO_BETTERCELL_ATPT
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Adjacency-CGI
Type Name
Type Definition
External Comment
294 / 1392
NB_ADJ_SCELL_OUT_TCH_HO_TRAFFIC_ATPT
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Adjacency-CGI
Type Name
Type Definition
External Comment
295 / 1392
NB_ADJ_SCELL_OUT_ FORCED_DR_ATPT
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Adjacency-CGI
Type Name
Type Definition
External Comment
296 / 1392
297 / 1392
14.2 Adjacency
14.2.1 All Adjacency
C730 - NB_ADJ_TCELL_INC_TCH_HO_ATPT (Section 14.2.2.2.2.1 )
C731 - NB_ADJ_TCELL_INC_TCH_HO_SUCC (Section 14.2.2.2.2.2 )
C733 - NB_ADJ_TCELL_INC_TCH_HO_EXEC_FAIL_MS_ACC (Section
14.2.2.2.2.3 )
C734 - NB_ADJ_TCELL_INC_TCH_HO_EMERGENCY_ATPT (Section
14.2.2.2.2.4 )
C735 - NB_ADJ_TCELL_INC_TCH_HO_BETTERCELL_ATPT (Section
14.2.2.2.2.5 )
C737 - NB_ADJ_TCELL_INC_TCH_HO_TRAFFIC_ATPT (Section 14.2.2.2.2.6
)
C738 - NB_ADJ_TCELL_INC_FORCED_DR_ATPT (Section 14.2.2.2.2.7 )
C753 - NB_ADJ_TCELL_INC_TCH_HO_OTHER_ATPT (Section 14.2.2.2.2.8 )
298 / 1392
14.2.2.2
14.2.2.2.1 All
14.2.2.2.2
14.2.2.2.2.1 C730 - NB_ADJ_TCELL_INC_TCH_HO_ATPT
Long Name
NB_ADJ_TCELL_INC_TCH_HO_ATPT
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Adjacency-CGI
Type Name
Type Definition
External Comment
299 / 1392
NB_ADJ_TCELL_INC_TCH_HO_SUCC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Adjacency-CGI
Type Name
Type Definition
External Comment
300 / 1392
NB_ADJ_TCELL_INC_TCH_HO_EXEC_FAIL_MS_ACC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Adjacency-CGI
Type Name
Type Definition
External Comment
301 / 1392
NB_ADJ_TCELL_INC_TCH_HO_EMERGENCY_ATPT
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Adjacency-CGI
Type Name
Type Definition
External Comment
302 / 1392
NB_ADJ_TCELL_INC_TCH_HO_BETTERCELL_ATPT
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Adjacency-CGI
Type Name
Type Definition
External Comment
303 / 1392
NB_ADJ_TCELL_INC_TCH_HO_TRAFFIC_ATPT
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Adjacency-CGI
Type Name
Type Definition
External Comment
304 / 1392
NB_ADJ_TCELL_INC_FORCED_DR_ATPT
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Adjacency-CGI
Type Name
Type Definition
External Comment
305 / 1392
NB_ADJ_TCELL_INC_TCH_HO_OTHER_ATPT
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Adjacency-CGI
Type Name
Type Definition
External Comment
306 / 1392
307 / 1392
308 / 1392
15.2 Handover
15.2.1 All Handover
C100 - NB_OUT_INT_SDCCH_HO_ATPT (Section 15.2.2.7.2.1 )
C101 - NB_INTRA_SDCCH_HO_PREP_FAIL_CONG (Section 15.2.2.5.2.1 )
C102 - NB_INTRA_SDCCH_HO_SUCC (Section 15.2.2.5.2.2 )
C103 - NB_INTRA_SDCCH_HO_EXEC_FAIL_NO_REV (Section 15.2.2.5.2.3 )
C107 - NB_INTRA_SDCCH_HO_EXEC_FAIL_REV (Section 15.2.2.5.2.4 )
C115 - NB_SDCCH_HO_MSC_TRIG (Section 15.2.2.2.2.1 )
C310 - NB_INC_EXT_SDCCH_HO_REQ (Section 15.2.2.3.2.1 )
C311 - NB_INC_EXT_SDCCH_HO_ATPT (Section 15.2.2.3.2.2 )
C330 - NB_INC_INT_SDCCH_HO_REQ (Section 15.2.2.4.2.1 )
C331 - NB_INC_INT_SDCCH_HO_ATPT (Section 15.2.2.4.2.2 )
C360 - NB_INTRA_SDCCH_HO_REQ (Section 15.2.2.5.2.5 )
C361 - NB_INTRA_SDCCH_HO_ATPT (Section 15.2.2.5.2.6 )
C445 - NB_SDCCH_HO_ATPT_23_TrafHandover (Section 15.2.2.2.2.2 )
C446 - NB_SDCCH_HO_ATPT_24_GenCaptureHandover (Section
15.2.2.2.2.3 )
C454 - NB_SDCCH_HO_ATPT_22_TooShortDistance (Section 15.2.2.2.2.4 )
C510 - NB_SDCCH_HO_ATPT_2_TooLowQualUp (Section 15.2.2.2.2.5 )
C511 - NB_SDCCH_HO_ATPT_3_TooLowLevUp (Section 15.2.2.2.2.6 )
C512 - NB_SDCCH_HO_ATPT_4_TooLowQualDown (Section 15.2.2.2.2.7 )
C513 - NB_SDCCH_HO_ATPT_5_TooLowLevDown (Section 15.2.2.2.2.8 )
309 / 1392
15.2.2 SDCCH
15.2.2.1 All SDCCH
C100 - NB_OUT_INT_SDCCH_HO_ATPT (Section 15.2.2.7.2.1 )
C101 - NB_INTRA_SDCCH_HO_PREP_FAIL_CONG (Section 15.2.2.5.2.1 )
C102 - NB_INTRA_SDCCH_HO_SUCC (Section 15.2.2.5.2.2 )
310 / 1392
311 / 1392
15.2.2.2 Cause
15.2.2.2.1 All Cause
C115 - NB_SDCCH_HO_MSC_TRIG (Section 15.2.2.2.2.1 )
C445 - NB_SDCCH_HO_ATPT_23_TrafHandover (Section 15.2.2.2.2.2 )
C446 - NB_SDCCH_HO_ATPT_24_GenCaptureHandover (Section
15.2.2.2.2.3 )
C454 - NB_SDCCH_HO_ATPT_22_TooShortDistance (Section 15.2.2.2.2.4 )
C510 - NB_SDCCH_HO_ATPT_2_TooLowQualUp (Section 15.2.2.2.2.5 )
C511 - NB_SDCCH_HO_ATPT_3_TooLowLevUp (Section 15.2.2.2.2.6 )
C512 - NB_SDCCH_HO_ATPT_4_TooLowQualDown (Section 15.2.2.2.2.7 )
C513 - NB_SDCCH_HO_ATPT_5_TooLowLevDown (Section 15.2.2.2.2.8 )
C514 - NB_SDCCH_HO_ATPT_6_TooLongDistance (Section 15.2.2.2.2.9 )
C516 - NB_SDCCH_HO_ATPT_15_TooHighLevInterfUp (Section 15.2.2.2.2.10
)
C517 - NB_SDCCH_HO_ATPT_16_TooHighLevInterfDown (Section
15.2.2.2.2.11 )
C518 - NB_SDCCH_HO_ATPT_12_TooLowPowBudg (Section 15.2.2.2.2.12 )
C519 - NB_SDCCH_HO_ATPT_21_HighLevNeigCellPrefBand (Section
15.2.2.2.2.13 )
C605a - NB_SDCCH_HO_ATPT_7_ConsBadSACCHmicroCell (Section
15.2.2.2.2.14 )
C605d - NB_SDCCH_HO_ATPT_17_TooLowLevUpMicroCell (Section
15.2.2.2.2.15 )
C605e - NB_SDCCH_HO_ATPT_18_TooLowLevDownMicroCell (Section
15.2.2.2.2.16 )
C605f - NB_SDCCH_HO_ATPT_14_HighLevNeigLowCellSlowMS (Section
15.2.2.2.2.17 )
C607 - NB_SDCCH_HO_ATPT_20_HighLevNeigCellForcDR (Section
15.2.2.2.2.18 )
312 / 1392
15.2.2.2.2
15.2.2.2.2.1 C115 - NB_SDCCH_HO_MSC_TRIG
Long Name
NB_SDCCH_HO_MSC_TRIG
Definition
Number of external handovers triggered by the MSC but not required by the BSS.
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
313 / 1392
NB_SDCCH_HO_ATPT_23_TrafHandover
Definition
Number of inter-cell internal or external handover attempts, with the cause 23:
"traffic handover" on SDCCH. This counter counts also the directed retries.
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
314 / 1392
NB_SDCCH_HO_ATPT_24_GenCaptureHandover
Definition
Number of inter-cell internal or external handover attempts, with the cause 24:
"general capture handover" on SDCCH. This counter counts also the directed
retries.
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
315 / 1392
NB_SDCCH_HO_ATPT_22_TooShortDistance
Definition
Trigger condition
Whenever 44.018 HANDOVER COMMAND is sent to the mobile via the BTS
because of cause 22 on SDCCH. This counter is incremented in the serving cell.
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Sub Domain 1
SDCCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
316 / 1392
NB_SDCCH_HO_ATPT_2_TooLowQualUp
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
317 / 1392
NB_SDCCH_HO_ATPT_3_TooLowLevUp
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
318 / 1392
NB_SDCCH_HO_ATPT_4_TooLowQualDown
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
319 / 1392
NB_SDCCH_HO_ATPT_5_TooLowLevDown
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
320 / 1392
NB_SDCCH_HO_ATPT_6_TooLongDistance
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
321 / 1392
NB_SDCCH_HO_ATPT_15_TooHighLevInterfUp
Definition
Number of SDCCH intra-cell handover attempts with cause 15: "too high level
interference on uplink".
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
322 / 1392
NB_SDCCH_HO_ATPT_16_TooHighLevInterfDown
Definition
Number of SDCCH intra-cell handover attempts with cause 16: "too high level
interference on downlink".
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
323 / 1392
NB_SDCCH_HO_ATPT_12_TooLowPowBudg
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
324 / 1392
NB_SDCCH_HO_ATPT_21_HighLevNeigCellPrefBand
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
325 / 1392
NB_SDCCH_HO_ATPT_7_ConsBadSACCHmicroCell
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
326 / 1392
NB_SDCCH_HO_ATPT_17_TooLowLevUpMicroCell
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
327 / 1392
NB_SDCCH_HO_ATPT_18_TooLowLevDownMicroCell
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
328 / 1392
NB_SDCCH_HO_ATPT_14_HighLevNeigLowCellSlowMS
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
329 / 1392
NB_SDCCH_HO_ATPT_20_HighLevNeigCellForcDR
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
330 / 1392
15.2.2.3.2
15.2.2.3.2.1 C310 - NB_INC_EXT_SDCCH_HO_REQ
Long Name
NB_INC_EXT_SDCCH_HO_REQ
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
331 / 1392
NB_INC_EXT_SDCCH_HO_ATPT
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
332 / 1392
NB_INC_EXT_SDCCH_HO_PREP_FAIL_CONG
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
333 / 1392
NB_INC_EXT_SDCCH_HO_SUCC
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
334 / 1392
NB_INC_EXT_SDCCH_HO_EXEC_FAIL_MS_ACCESS
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
335 / 1392
15.2.2.4.2
15.2.2.4.2.1 C330 - NB_INC_INT_SDCCH_HO_REQ
Long Name
NB_INC_INT_SDCCH_HO_REQ
Definition
Trigger condition
Whenever the BSC process responsible for the handover procedure selects a
target cell (among a list of target cells) for internal inter cell SDCCH handover.
Sub Domain 1
SDCCH
Sub Domain 2
Incoming Internal
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
336 / 1392
NB_INC_INT_SDCCH_HO_ATPT
Definition
Trigger condition
44.018HANDOVER COMMAND is sent to the MS via the serving cell for internal
inter cell SDCCH handover. However, the counter is incremented in the TARGET
cell, based on the target cell ID indicated by the HO Command message,
Sub Domain 1
SDCCH
Sub Domain 2
Incoming Internal
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
337 / 1392
NB_INC_INT_SDCCH_HO_PREP_FAIL_CONG
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Incoming Internal
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
338 / 1392
NB_INC_INT_SDCCH_HO_SUCC
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Incoming Internal
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
339 / 1392
NB_INC_INT_SDCCH_HO_EXEC_FAIL_MS_ACCESS
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Incoming Internal
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
340 / 1392
15.2.2.5 Intra
15.2.2.5.1 All Intra
C101 - NB_INTRA_SDCCH_HO_PREP_FAIL_CONG (Section 15.2.2.5.2.1 )
C102 - NB_INTRA_SDCCH_HO_SUCC (Section 15.2.2.5.2.2 )
C103 - NB_INTRA_SDCCH_HO_EXEC_FAIL_NO_REV (Section 15.2.2.5.2.3 )
C107 - NB_INTRA_SDCCH_HO_EXEC_FAIL_REV (Section 15.2.2.5.2.4 )
C360 - NB_INTRA_SDCCH_HO_REQ (Section 15.2.2.5.2.5 )
C361 - NB_INTRA_SDCCH_HO_ATPT (Section 15.2.2.5.2.6 )
15.2.2.5.2
15.2.2.5.2.1 C101 - NB_INTRA_SDCCH_HO_PREP_FAIL_CONG
Long Name
NB_INTRA_SDCCH_HO_PREP_FAIL_CONG
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Intra
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
341 / 1392
NB_INTRA_SDCCH_HO_SUCC
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Intra
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
342 / 1392
NB_INTRA_SDCCH_HO_EXEC_FAIL_NO_REV
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Intra
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
343 / 1392
NB_INTRA_SDCCH_HO_EXEC_FAIL_REV
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Intra
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
344 / 1392
NB_INTRA_SDCCH_HO_REQ
Definition
Trigger condition
Whenever the BSC process responsible for the handover procedure starts an
intra cell SDCCH handover procedure.
Sub Domain 1
SDCCH
Sub Domain 2
Intra
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
345 / 1392
NB_INTRA_SDCCH_HO_ATPT
Definition
Trigger condition
44.018ASSIGNMENT COMMAND is sent to the MS via the cell for intra cell
handover on SDCCH.
Sub Domain 1
SDCCH
Sub Domain 2
Intra
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
346 / 1392
15.2.2.6.2
15.2.2.6.2.1 C85a - NB_OUT_EXT_SDCCH_REAL_HO_REQ
Long Name
NB_OUT_EXT_SDCCH_REAL_HO_REQ
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
347 / 1392
NB_OUT_EXT_SDCCH_HO_SUCC
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
348 / 1392
NB_OUT_EXT_SDCCH_HO_EXEC_FAIL_REV
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
349 / 1392
NB_OUT_EXT_SDCCH_HO_EXEC_FAIL_NO_REV
Definition
Trigger condition
Whenever the timer supervising the handover procedure on the serving cell
(T8), expires during an external SDCCH handover, except if a 48.008 CLEAR
COMMAND with "normal event/call control" cause was received from the MSC,
leading to a normal call release. In such a case, the handover is considered
as successful. Note: This counter counts both inter-PLMN and intra-PLMN
handover events.
Sub Domain 1
SDCCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
350 / 1392
NB_OUT_EXT_SDCCH_HO_ATPT
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
351 / 1392
15.2.2.7.2
15.2.2.7.2.1 C100 - NB_OUT_INT_SDCCH_HO_ATPT
Long Name
NB_OUT_INT_SDCCH_HO_ATPT
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Outgoing Internal
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
352 / 1392
NB_OUT_INT_SDCCH_HO_REQ
Definition
Trigger condition
Whenever the BSC process responsible for the handover procedure selects a
target cell (among a list of target cells) for internal inter cell SDCCH handover.
Sub Domain 1
SDCCH
Sub Domain 2
Outgoing Internal
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
353 / 1392
NB_OUT_INT_SDCCH_HO_SUCC
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Outgoing Internal
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
354 / 1392
NB_OUT_INT_SDCCH_HO_EXEC_FAIL_REV
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Outgoing Internal
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
355 / 1392
NB_OUT_INT_SDCCH_HO_EXEC_FAIL_NO_REV
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Outgoing Internal
Sub Domain 3
Measured Object
Common cell
Type Name
SDCCH handover
Type Definition
External Comment
356 / 1392
357 / 1392
16.2 Handover
16.2.1 All Handover
C142a - NB_OUT_FORCED_IDR_SUCC (Section 16.2.2.3.3.1 )
C142b - NB_OUT_FORCED_EDR_SUCC (Section 16.2.2.2.2.1 )
C142c - NB_OUT_NOR_IDR_SUCC (Section 16.2.2.3.3.2 )
C142d - NB_OUT_NOR_EDR_SUCC (Section 16.2.2.2.2.2 )
C143a - NB_OUT_FORCED_IDR_EXEC_FAIL_REV (Section 16.2.2.3.3.3 )
C143b - NB_OUT_FORCED_IDR_EXEC_FAIL_NO_REV (Section 16.2.2.3.3.4
)
C143c - NB_OUT_FORCED_EDR_EXEC_FAIL_REV (Section 16.2.2.2.2.3 )
358 / 1392
359 / 1392
16.2.2.2 External
16.2.2.2.1 All External
C142b - NB_OUT_FORCED_EDR_SUCC (Section 16.2.2.2.2.1 )
C142d - NB_OUT_NOR_EDR_SUCC (Section 16.2.2.2.2.2 )
C143c - NB_OUT_FORCED_EDR_EXEC_FAIL_REV (Section 16.2.2.2.2.3 )
C143d - NB_OUT_FORCED_EDR_EXEC_FAIL_NO_REV (Section
16.2.2.2.2.4 )
C143g - NB_OUT_NOR_EDR_EXEC_FAIL_REV (Section 16.2.2.2.2.5 )
C143h - NB_OUT_NOR_EDR_EXEC_FAIL_NO_REV (Section 16.2.2.2.2.6 )
C144b - NB_OUT_FORCED_EDR_REQ (Section 16.2.2.2.2.7 )
C144d - NB_OUT_NOR_EDR_REQ (Section 16.2.2.2.2.8 )
C145b - NB_OUT_FORCED_EDR_ATPT (Section 16.2.2.2.2.9 )
C145d - NB_OUT_NOR_EDR_ATPT (Section 16.2.2.2.2.10 )
360 / 1392
16.2.2.2.2 Outgoing
16.2.2.2.2.1 C142b - NB_OUT_FORCED_EDR_SUCC
Long Name
NB_OUT_FORCED_EDR_SUCC
Definition
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
External
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
361 / 1392
NB_OUT_NOR_EDR_SUCC
Definition
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
External
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
362 / 1392
NB_OUT_FORCED_EDR_EXEC_FAIL_REV
Definition
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
External
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
363 / 1392
NB_OUT_FORCED_EDR_EXEC_FAIL_NO_REV
Definition
Trigger condition
Whenever the timer supervising the handover procedure (T8) expires during
a forced external directed retry, except if a 48.008 CLEAR COMMAND with
"normal event/call control" cause was received from the MSC, leading to
a normal call release. In such a case, the directed retry is considered as
successful. Note: This counter counts both inter-PLMN and intra-PLMN directed
retry events.
Sub Domain 1
Directed Retry
Sub Domain 2
External
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
364 / 1392
NB_OUT_NOR_EDR_EXEC_FAIL_REV
Definition
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
External
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
365 / 1392
NB_OUT_NOR_EDR_EXEC_FAIL_NO_REV
Definition
Trigger condition
Whenever the timer supervising the handover procedure (T8) expires during
a normal external directed retry, except if a 48.008 CLEAR COMMAND with
"normal event/call control" cause was received from the MSC, leading to
a normal call release. In such a case, the directed retry is considered as
successful. Note: This counter counts both inter-PLMN and intra-PLMN directed
retry events.
Sub Domain 1
Directed Retry
Sub Domain 2
External
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
366 / 1392
NB_OUT_FORCED_EDR_REQ
Definition
Number of outgoing forced external directed retry requests. The target TCH
channel can be in HR or FR usage.
Trigger condition
Whenever the BSC process responsible for handover procedure starts a forced
external directed retry from the serving cell. Note: This counter counts both
inter-PLMN and intra-PLMN directed retry events.
Sub Domain 1
Directed Retry
Sub Domain 2
External
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
367 / 1392
NB_OUT_NOR_EDR_REQ
Definition
Number of outgoing normal external directed retry requests. The target TCH
channel can be in HR or FR usage.
Trigger condition
Whenever the BSC process responsible for handover procedure starts a normal
external directed retry from the serving cell. Note: This counter counts both
inter-PLMN and intra-PLMN directed retry events.
Sub Domain 1
Directed Retry
Sub Domain 2
External
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
368 / 1392
NB_OUT_FORCED_EDR_ATPT
Definition
Number of outgoing forced external directed retry attempts. The target TCH
channel can be in HR or FR usage.
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
External
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
369 / 1392
NB_OUT_NOR_EDR_ATPT
Definition
Number of outgoing normal external directed retry attempts. The target TCH
channel can be in HR or FR usage.
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
External
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
370 / 1392
16.2.2.3 Internal
16.2.2.3.1 All Internal
C142a - NB_OUT_FORCED_IDR_SUCC (Section 16.2.2.3.3.1 )
C142c - NB_OUT_NOR_IDR_SUCC (Section 16.2.2.3.3.2 )
C143a - NB_OUT_FORCED_IDR_EXEC_FAIL_REV (Section 16.2.2.3.3.3 )
C143b - NB_OUT_FORCED_IDR_EXEC_FAIL_NO_REV (Section 16.2.2.3.3.4
)
C143e - NB_OUT_NOR_IDR_EXEC_FAIL_REV (Section 16.2.2.3.3.5 )
C143f - NB_OUT_NOR_IDR_EXEC_FAIL_NO_REV (Section 16.2.2.3.3.6 )
C144a - NB_OUT_FORCED_IDR_REQ (Section 16.2.2.3.3.7 )
C144c - NB_OUT_NOR_IDR_REQ (Section 16.2.2.3.3.8 )
C145a - NB_OUT_FORCED_IDR_ATPT (Section 16.2.2.3.3.9 )
C145c - NB_OUT_NOR_IDR_ATPT (Section 16.2.2.3.3.10 )
C151 - NB_INC_IDR_SUCC (29) (Section 16.2.2.3.2.1 )
C152 - NB_INC_IDR_EXEC_FAIL_MS_ACCESS (Section 16.2.2.3.2.2 )
C153 - NB_INC_IDR_REQ (Section 16.2.2.3.2.3 )
C154 - NB_INC_IDR_ATPT (Section 16.2.2.3.2.4 )
C555 - NB_INC_IDR_PREP_FAIL_CONG_R_ABIS (Section 16.2.2.3.2.5 )
16.2.2.3.2 Incoming
16.2.2.3.2.1 C151 - NB_INC_IDR_SUCC (29)
Long Name
NB_INC_IDR_SUCC (29)
Definition
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Incoming
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
371 / 1392
NB_INC_IDR_EXEC_FAIL_MS_ACCESS
Definition
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Incoming
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
372 / 1392
NB_INC_IDR_REQ
Definition
Trigger condition
Whenever the BSC process responsible for handover procedure selects the
target cell for forced or normal internal directed retry.
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Incoming
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
373 / 1392
NB_INC_IDR_ATPT
Definition
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Incoming
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
374 / 1392
NB_INC_IDR_PREP_FAIL_CONG_R_ABIS
Definition
Trigger condition
1) Whenever there are no free TCH in the target cell during a forced or normal
internal directed retry. 2) Whenever no TCH resource is available on A-bis
interface for a forced or normal internal directed retry. (not valid in B7). Note 1:
In MX BSC, this counter is incremented whenever a TCH cannot be not allocated
due to the TCH processing capacity of CCP reaches the limit defined by the
MAX_TCH_PER_CCP parameter. In this case, MC926 is also incremented by
one. Note 2: In IP mode, this counter is increased by 1 if: - the cell mapped
on a BTS is in IP congestion status; - or the TCH processing capacity of
AbisBTSGroup reaches the limit defined by the NB_MAX_ACTIVE_TCH_TS
parameter
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Incoming
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
375 / 1392
16.2.2.3.3 Outgoing
16.2.2.3.3.1 C142a - NB_OUT_FORCED_IDR_SUCC
Long Name
NB_OUT_FORCED_IDR_SUCC
Definition
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
376 / 1392
NB_OUT_NOR_IDR_SUCC
Definition
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
377 / 1392
NB_OUT_FORCED_IDR_EXEC_FAIL_REV
Definition
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
378 / 1392
NB_OUT_FORCED_IDR_EXEC_FAIL_NO_REV
Definition
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
379 / 1392
NB_OUT_NOR_IDR_EXEC_FAIL_REV
Definition
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
380 / 1392
NB_OUT_NOR_IDR_EXEC_FAIL_NO_REV
Definition
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
381 / 1392
NB_OUT_FORCED_IDR_REQ
Definition
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
382 / 1392
NB_OUT_NOR_IDR_REQ
Definition
Number of outgoing normal internal directed retry requests. The target TCH
channel can be in HR or FR usage.
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
383 / 1392
NB_OUT_FORCED_IDR_ATPT
Definition
Number of outgoing forced internal directed retry attempts. The target TCH
channel can be in HR or FR usage.
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
384 / 1392
NB_OUT_NOR_IDR_ATPT
Definition
Number of outgoing normal internal directed retry attempts. The target TCH
channel can be in HR or FR usage.
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Outgoing
Measured Object
Common cell
Type Name
Type Definition
Set of counters related to the directed retry procedure. The counters are
provided per directed retry category : incoming and outgoing, internal and
external, forced and normal.
External Comment
385 / 1392
386 / 1392
387 / 1392
17.2.2.2.2 Failure
17.2.2.2.2.1 CB603 - NB_SMS_CB_FAIL_IND
Long Name
NB_SMS_CB_FAIL_IND
Definition
Each time a FAILURE INDICATION sent to the CBC, number of cells implicated
by the failure. The BSC detects a failure and request the CBC (by the FAILURE
INDICATION message) to stop the sending of messages to a list of cells.
Trigger condition
Sub Domain 1
Sub Domain 2
Cell Broadcast
Sub Domain 3
Failure
Measured Object
BSC
Type Name
SMS CB measurements
Type Definition
External Comment
388 / 1392
NB_SMS_CB_WRITE_REP_KILL_MESS_REJ
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Cell Broadcast
Sub Domain 3
Failure
Measured Object
BSC
Type Name
SMS CB measurements
Type Definition
External Comment
389 / 1392
NB_SMSCB_WRITE_REPL_SUCC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Cell Broadcast
Measured Object
BSC
Type Name
SMS CB measurements
Type Definition
External Comment
390 / 1392
NB_SMSCB_KILL_MESS_SUCC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Cell Broadcast
Measured Object
BSC
Type Name
SMS CB measurements
Type Definition
External Comment
391 / 1392
392 / 1392
393 / 1392
394 / 1392
395 / 1392
396 / 1392
18.2.2 RMS
18.2.2.1 All RMS
RMS10 - VQ_NOISY_UL_INTERFERENCE (Section 18.2.2.2.2.1 )
RMS11 - VQ_NOISY_DL_INTERFERENCE (Section 18.2.2.2.2.2 )
RMS12 - VQ_NOISY_UL_COVERAGE (Section 18.2.2.2.2.3 )
RMS13 - VQ_NOISY_DL_COVERAGE (Section 18.2.2.2.2.4 )
RMS14 - VQ_NOISY_UL_UNDEFINED (Section 18.2.2.2.2.5 )
RMS15 - VQ_NOISY_DL_UNDEFINED (Section 18.2.2.2.2.6 )
RMS16 - VQ_NOISY_UL_BAD_FER (Section 18.2.2.2.2.7 )
RMS17 - VQ_NOISY_UL_GOOD_FER (Section 18.2.2.2.2.8 )
RMS18 - VQ_ABNORMAL_BAD_FER (Section 18.2.2.2.2.9 )
RMS32 - TOT_MEAS (Section 18.2.2.2.2.10 )
RMS33 - TOT_MEAS_L1INFO_NOL3INFO (Section 18.2.2.2.2.11 )
RMS34 - TOT_MEAS_DTX_UL (Section 18.2.2.2.2.12 )
RMS35 - TOT_MEAS_DTX_DL (Section 18.2.2.2.2.13 )
RMS36 - PERC_TA_GT_TA_STAT (Section 18.2.2.2.2.14 )
RMS38 - TOT_EMR (Section 18.2.2.2.2.15 )
RMS3a - TPR_RXQUAL_UL_RXLEV_UL (Section 18.2.2.2.2.16 )
RMS3b - TMR_RXQUAL_UL_RXLEV_UL (Section 18.2.2.2.2.17 )
RMS41a - AMR_WB_GMSK_FR_UL_BAD (Section 18.2.2.2.2.18 )
RMS41b - MAX_AMR_WB_GMSK_FR_UL_BAD (Section 18.2.2.2.2.19 )
RMS42a - AMR_WB_GMSK _FR_UL_RXLEV_UL (Section 18.2.2.2.2.20 )
RMS42b - MAX_AMR_WB_GMSK_FR_UL_RXLEV_UL (Section 18.2.2.2.2.21
)
RMS43a - AMR_WB_GMSK_FR_DL_RXLEV_DL (Section 18.2.2.2.2.22 )
RMS43b - MAX_AMR_WB_GMSK_FR_DL_RXLEV_DL (Section 18.2.2.2.2.23
)
RMS44a - AMR_FR_UL_BAD (Section 18.2.2.2.2.24 )
RMS44b - MAX_AMR_FR_UL_BAD (Section 18.2.2.2.2.25 )
RMS45a - AMR_HR_UL_BAD (Section 18.2.2.2.2.26 )
RMS45b - MAX_AMR_HR_UL_BAD (Section 18.2.2.2.2.27 )
RMS46a - AMR_FR_UL_RXLEV_UL (Section 18.2.2.2.2.28 )
RMS46b - MAX_AMR_FR_UL_RXLEV_UL (Section 18.2.2.2.2.29 )
RMS47a - AMR_FR_DL_RXLEV_DL (Section 18.2.2.2.2.30 )
RMS47b - MAX_AMR_FR_DL_RXLEV_DL (Section 18.2.2.2.2.31 )
RMS48a - AMR_HR_UL_RXLEV_UL (Section 18.2.2.2.2.32 )
RMS49a - AMR_HR_DL_RXLEV_DL (Section 18.2.2.2.2.33 )
RMS49b - MAX_AMR_HR_DL_RXLEV_DL (Section 18.2.2.2.2.34 )
RMS4a - TPR_RXQUAL_DL_RXLEV_DL (Section 18.2.2.2.2.35 )
397 / 1392
398 / 1392
18.2.2.2
18.2.2.2.1 All
18.2.2.2.2
18.2.2.2.2.1 RMS10 - VQ_NOISY_UL_INTERFERENCE
Long Name
VQ_NOISY_UL_INTERFERENCE
Definition
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
399 / 1392
VQ_NOISY_DL_INTERFERENCE
Definition
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
400 / 1392
VQ_NOISY_UL_COVERAGE
Definition
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
401 / 1392
VQ_NOISY_DL_COVERAGE
Definition
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
402 / 1392
VQ_NOISY_UL_UNDEFINED
Definition
Number of calls suffering from both problem of interference and bad coverage
on the uplink path. These calls are not counted in VQ_NOISY_UL_COVERAGE
or VQ_NOISY_UL_INTERFERENCE.
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
403 / 1392
VQ_NOISY_DL_UNDEFINED
Definition
Number of calls suffering from both problem of interference and bad coverage on
the downlink path. These calls are not counted in VQ_NOISY_DL_COVERAGE
or VQ_NOISY_DL_INTERFERENCE.
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
404 / 1392
VQ_NOISY_UL_BAD_FER
Definition
Number of calls with bad quality measurements and with bad FER
measurements on the uplink path.
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
405 / 1392
VQ_NOISY_UL_GOOD_FER
Definition
Number of calls with bad quality measurements but with good FER
measurements on the uplink path.
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
406 / 1392
VQ_ABNORMAL_BAD_FER
Definition
Number of calls with fair quality measurements but with bad FER measurements
on the uplink path.
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
407 / 1392
TOT_MEAS
Definition
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
408 / 1392
TOT_MEAS_L1INFO_NOL3INFO
Definition
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
409 / 1392
TOT_MEAS_DTX_UL
Definition
Number of measurement results used for RMS, where DTX is used on the
uplink path.
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
410 / 1392
TOT_MEAS_DTX_DL
Definition
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
411 / 1392
PERC_TA_GT_TA_STAT
Definition
Reserved for internal Alcatel-Lucent usage (PS detection on TS basis for Edge
capable TRX)
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
412 / 1392
TOT_EMR
Definition
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
413 / 1392
TPR_RXQUAL_UL_RXLEV_UL
Definition
Table of 3x 8x10 results. Each cell (i,j) of the table contains : 1) number of
reports in which UL RXQUAL is equal to j and UL RXLEV is reported in level
band i (Cij) 2) corresponding averaged value of MS power level 3) corresponding
averaged value of Timing Advance For Cij, the result is given as follows : Cij=Vij
x 254 / Max_i, where Vij represents the real number of measurements, and
Max_i the greatest value of Vij, for i given (see RMS3b). Cij=0 indicates number
of measurements = 0 Cij=254 indicates number of measurements = Max_i
Cij=255 is reserved to indicate overflow. The values of the average MS power
level (2) and the average Timing Advance (3) are directly given, both with a
precision of 0.25. Note that these values (2 and 3) that are indicated in the ASCII
file, which can be obtained via the OBSYNT interface, still have to be divided
by 4, whereas the values that are provided at the user interface are the correct
ones. UL RXQUAL can take values from 0 to 7. Level band i is defined by :
MEAS_STAT_LEV_(i-1)<= RXLEV < MEAS_STAT_LEV_i MEAS_STAT_LEV_0
= -47 dBm, MEAS_STAT_LEV_10 = -110 dBm According to 3GPP, values of
RXLEV lower than -110 dBm are considered as equal to -110 dBm
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
414 / 1392
TMR_RXQUAL_UL_RXLEV_UL
Definition
Table of 10 maximum results. Each cell Ci of the table indicates the greatest
value of the Vij for a i given in RMS3a.
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
415 / 1392
AMR_WB_GMSK_FR_UL_BAD
Definition
Table of 3 results Each cell (i) of the table contains: number of FR AMR
WB GMSK UL bad speech frames. The result is given as follows : Ci=MAX(Round[Vi x 254 / Max], 1), where Vi represents the real number of
measurements, and Max the greatest value of Vi (see RMS41b). - Ci=0 indicates
number of measurements = 0 - Ci=254 indicates number of measurements =
Max - Ci=255 is reserved to indicate overflow. FR AMR WB GMSK codecs are
defined by : - codec 1 = 6.60 kbit/s, codec 2 = 8.85 kbit/s, codec 3 = 12.65 kbit/s.
Trigger condition
The TRE counts for each AMR WB call and for each FR AMR WB GMSK codec
the number of bad speech frames received from the MS (or sent to the TC) in
uplink. Only speech frames of type "Speech_Degraded", "Speech_Bad" or
"SID_Bad" shall be taken into account.
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
416 / 1392
MAX_AMR_WB_GMSK_FR_UL_BAD
Definition
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
417 / 1392
AMR_WB_GMSK _FR_UL_RXLEV_UL
Definition
Table of 3x10 results Each cell (i,k) of the table contains: 1) number of correct
UL speech frames using FR AMR WB GMSK codec k for which UL RXLEV is
reported in level band i. The result is given as follows: - Cik=MAX(Round[Vik
x 254 / Max_i], 1), where Vik represents the real number of measurements,
and Max_i the greatest value of Vik, for i given (see RMS42b). - Cik=0
indicates number of measurements = 0 - Cik=254 indicates number of
measurements = Max_i - Cik=255 is reserved to indicate overflow. Level band
i is defined by : MEAS_STAT_LEV_j<= RXLEV < MEAS_STAT_LEV_I j = i 1
MEAS_STAT_LEV_0 = -47 dBm, MEAS_STAT_LEV_10 = -110 dBm FR AMR
WB GMSK codecs are defined by: codec 1 = 6.60 kbit/s, codec 2 = 8.85 kbit/s,
codec 3 = 12.65 kbit/s. According to 3GPP, values of RXLEV lower than -110
dBm are considered as equal to -110 dBm
Trigger condition
In the period of the SACCH multiframe, the TRE counts for each FR AMR WB
GMSK call and for each FR AMR WB GMSK codec the number of correct
speech frames received from the MS (or sent to the TRAU) in uplink. To insure
consistency of the results, only speech frames of type "Speech_Good" or
"SID_Update" shall be taken into account. At reception of the measurement
report of a given MS, the results are gathered in the line of the matrix
corresponding to reported UL RXLEV.
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
418 / 1392
MAX_AMR_WB_GMSK_FR_UL_RXLEV_UL
Definition
Table of 10 maximum results. Each cell Ci of the table indicates the greatest
value of the Vik for a i given in RMS42a.
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
419 / 1392
AMR_WB_GMSK_FR_DL_RXLEV_DL
Definition
Table of 3x10 results Each cell (i,k) of the table contains : 1) number of correct
DL speech frames using FR AMR WB GMSK codec k for which DL RXLEV is
reported in level band i. The result is given as follows : Cik=MAX(Round[Vik
x 254 / Max_i], 1), where Vik represents the real number of measurements,
and Max_I the greatest value of Vik, for i given (see RMS43b). Cik=0
indicates number of measurements = 0 Cik=254 indicates number of
measurements = Max_i Cik=255 is reserved to indicate overflow. Level band i
is defined by : MEAS_STAT_LEV_j<= RXLEV < MEAS_STAT_LEV_i j = i - 1
MEAS_STAT_LEV_0 = -47 dBm, MEAS_STAT_LEV_10 = -110 dBm FR AMR
WB GMSK codecs are defined by: codec 1 = 6.60 kbit/s, codec 2 = 8.85 kbit/s,
codec 3 = 12.65 kbit/s. According to 3GPP, values of RXLEV lower than -110
dBm are considered as equal to -110 dBm
Trigger condition
In the period of the SACCH multiframe, the TRE counts for each FR AMR WB
call and for each FR AMR WB codec the number of correct speech frames
received from the TC (or sent to the MS) in downlink. To insure consistency of
the results, only speech frames of type "Speech_Good" or "SID_Update" shall
be taken into account. At reception of the measurement report of a given MS,
the results are gathered in the line of the matrix
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
420 / 1392
MAX_AMR_WB_GMSK_FR_DL_RXLEV_DL
Definition
Table of 10 maximum results. Each cell Ci of the table indicates the greatest
value of the Vik for a i given in RMS43a.
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
421 / 1392
AMR_FR_UL_BAD
Definition
Table of 8 results Each cell (i) of the table contains : number of AMR FR UL
bad speech frames. The result is given as follows : Ci=MAX(Round[Vi x 254 /
Max], 1), where Vi represents the real number of measurements, and Max the
greatest value of Vi (see RMS44b). Ci=0 indicates number of measurements
= 0 Ci=254 indicates number of measurements = Max Ci=255 is reserved to
indicate overflow. AMR FR codecs are defined by : codec 1 = 4.75 kbit/s, codec
2 = 5.15 kbit/s, codec 3 = 5.9 kbit/s, codec 4 = 6.7 kbit/s, codec 5 = 7.4 kbit/s,
codec 6 = 7.95 kbit/s, codec 7 = 10.2 kbit/s, codec 8 = 12.2 kbit/s
Trigger condition
The TRE counts for each AMR call and for each AMR FR codec the number
of bad speech frames received from the MS (or sent to the TC) in uplink. Only
speech frames of type "Speech_Degraded", "Speech_Bad" or "SID_Bad" shall
be taken into account.
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
422 / 1392
MAX_AMR_FR_UL_BAD
Definition
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
423 / 1392
AMR_HR_UL_BAD
Definition
Table of 5 results Each cell (i) of the table contains : number of AMR HR UL
bad speech frames. The result is given as follows : Ci=MAX(Round[Vi x 254 /
Max], 1), where Vi represents the real number of measurements, and Max the
greatest value of Vi (see RMS45b). Ci=0 indicates number of measurements
= 0 Ci=254 indicates number of measurements = Max Ci=255 is reserved to
indicate overflow. AMR HR codecs are defined by : codec 1 = 4.75 kbit/s, codec
2 = 5.15 kbit/s, codec 3 = 5.9 kbit/s, codec 4 = 6.7 kbit/s, codec 5 = 7.4 kbit/s
Trigger condition
The TRE counts for each AMR call and for each AMR HR codec the number
of bad speech frames received from the MS (or sent to the TC) in uplink. Only
speech frames of type "Speech_Degraded", "Speech_Bad" or "SID_Bad" shall
be taken into account.
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
424 / 1392
MAX_AMR_HR_UL_BAD
Definition
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
425 / 1392
AMR_FR_UL_RXLEV_UL
Definition
Table of 8x10 results Each cell (i,k) of the table contains : 1) number of correct
UL speech frames using AMR FR codec k for which UL RXLEV is reported
in level band i. The result is given as follows : Cik=MAX(Round[Vik x 254
/ Max_i], 1), where Vik represents the real number of measurements, and
Max_i the greatest value of Vik, for i given (see RMS46b). Cik=0 indicates
number of measurements = 0 Cik=254 indicates number of measurements
= Max_i Cik=255 is reserved to indicate overflow. Level band i is defined by :
MEAS_STAT_LEV_(i-1)<= RXLEV < MEAS_STAT_LEV_i MEAS_STAT_LEV_0
= -47 dBm, MEAS_STAT_LEV_10 = -110 dBm AMR FR codecs are defined by
: codec 1 = 4.75 kbit/s, codec 2 = 5.15 kbit/s, codec 3 = 5.9 kbit/s, codec 4 =
6.7 kbit/s, codec 5 = 7.4 kbit/s, codec 6 = 7.95 kbit/s, codec 7 = 10.2 kbit/s,
codec 8 = 12.2 kbit/s According to 3GPP, values of RXLEV lower than -110 dBm
are considered as equal to -110 dBm
Trigger condition
In the period of the SACCH multiframe, the TRE counts for each AMR call and
for each AMR FR codec the number of correct speech frames received from the
MS (or sent to the TRAU) in uplink. To insure consistency of the results, only
speech frames of type "Speech_Good" or "SID_Update" shall be taken into
account. At reception of the measurement report of a given MS, the results are
gathered in the line of the matrix corresponding to reported UL RXLEV.
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
426 / 1392
MAX_AMR_FR_UL_RXLEV_UL
Definition
Table of 10 maximum results. Each cell Ci of the table indicates the greatest
value of the Vik for a i given in RMS46a.
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
427 / 1392
AMR_FR_DL_RXLEV_DL
Definition
Table of 8x10 results Each cell (i,k) of the table contains : 1) number of correct
DL speech frames using AMR FR codec k for which DL RXLEV is reported
in level band i. The result is given as follows : Cik=MAX(Round[Vik x 254
/ Max_i], 1), where Vik represents the real number of measurements, and
Max_i the greatest value of Vik, for i given (see RMS47b). Cik=0 indicates
number of measurements = 0 Cik=254 indicates number of measurements
= Max_i Cik=255 is reserved to indicate overflow. Level band i is defined by :
MEAS_STAT_LEV_(i-1)<= RXLEV < MEAS_STAT_LEV_i MEAS_STAT_LEV_0
= -47 dBm, MEAS_STAT_LEV_10 = -110 dBm AMR FR codecs are defined by
: codec 1 = 4.75 kbit/s, codec 2 = 5.15 kbit/s, codec 3 = 5.9 kbit/s, codec 4 =
6.7 kbit/s, codec 5 = 7.4 kbit/s, codec 6 = 7.95 kbit/s, codec 7 = 10.2 kbit/s,
codec 8 = 12.2 kbit/s According to 3GPP, values of RXLEV lower than -110 dBm
are considered as equal to -110 dBm
Trigger condition
In the period of the SACCH multiframe, the TRE counts for each AMR call and
for each AMR FR codec the number of correct speech frames received from the
TC (or sent to the MS) in downlink. To insure consistency of the results, only
speech frames of type "Speech_Good" or "SID_Update" shall be taken into
account. At reception of the measurement report of a given MS, the results are
gathered in the line of the matrix corresponding to reported DL RXLEV.
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
428 / 1392
MAX_AMR_FR_DL_RXLEV_DL
Definition
Table of 10 maximum results. Each cell Ci of the table indicates the greatest
value of the Vik for a i given in RMS47a.
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
429 / 1392
AMR_HR_UL_RXLEV_UL
Definition
Table of 5x10 results Each cell (i,k) of the table contains : 1) number of correct
speech frames using AMR HR codec k for which UL RXLEV is reported in
level band i. The result is given as follows : Cik=MAX(Round[Vik x 254 /
Max_i], 1), where Vik represents the real number of measurements, and
Max_i the greatest value of Vik, for i given (see RMS46b). Cik=0 indicates
number of measurements = 0 Cik=254 indicates number of measurements
= Max_i Cik=255 is reserved to indicate overflow. Level band i is defined by :
MEAS_STAT_LEV_(i-1)<= RXLEV < MEAS_STAT_LEV_i MEAS_STAT_LEV_0
= -47 dBm, MEAS_STAT_LEV_10 = -110 dBm AMR HR codecs are defined by
: codec 1 = 4.75 kbit/s, codec 2 = 5.15 kbit/s, codec 3 = 5.9 kbit/s, codec 4 =
6.7 kbit/s, codec 5 = 7.4 kbit/s. According to 3GPP, values of RXLEV lower than
-110 dBm are considered as equal to -110 dBm
Trigger condition
In the period of the SACCH multiframe, the TRE counts for each AMR call and
for each AMR HR codec the number of correct speech frames received from the
MS (or sent to the TRAU) in uplink. To insure consistency of the results, only
speech frames of type "Speech_Good" or "SID_Update" shall be taken into
account. At reception of the measurement report of a given MS, the results are
gathered in the line of the matrix corresponding to reported UL RXLEV.
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
430 / 1392
AMR_HR_DL_RXLEV_DL
Definition
Table of 5x10 results Each cell (i,k) of the table contains : 1) number of correct
DL speech frames using AMR HR codec k for which DL RXLEV is reported
in level band i. The result is given as follows : Cik=MAX(Round[Vik x 254
/ Max_i], 1), where Vik represents the real number of measurements, and
Max_i the greatest value of Vik, for i given (see RMS46b). Cik=0 indicates
number of measurements = 0 Cik=254 indicates number of measurements
= Max_i Cik=255 is reserved to indicate overflow. Level band i is defined by :
MEAS_STAT_LEV_(i-1)<= RXLEV < MEAS_STAT_LEV_i MEAS_STAT_LEV_0
= -47 dBm, MEAS_STAT_LEV_10 = -110 dBm AMR HR codecs are defined by
: codec 1 = 4.75 kbit/s, codec 2 = 5.15 kbit/s, codec 3 = 5.9 kbit/s, codec 4 =
6.7 kbit/s, codec 5 = 7.4 kbit/s. According to 3GPP, values of RXLEV lower than
-110 dBm are considered as equal to -110 dBm
Trigger condition
In the period of the SACCH multiframe, the TRE counts for each AMR call and
for each AMR HR codec the number of correct speech frames received from the
TC (or sent to the MS) in downlink. To insure consistency of the results, only
speech frames of type "Speech_Good" or "SID_Update" shall be taken into
account. At reception of the measurement report of a given MS, the results are
gathered in the line of the matrix corresponding to reported DL RXLEV.
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
431 / 1392
MAX_AMR_HR_DL_RXLEV_DL
Definition
Table of 10 maximum results. Each cell Ci of the table indicates the greatest
value of the Vik for a i given in RMS49a.
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
432 / 1392
TPR_RXQUAL_DL_RXLEV_DL
Definition
Table of 3x 8x10 results. Each cell (i,j) of the table contains : 1) number of reports
in which DL RXQUAL is equal to j and DL RXLEV is reported in level band I (Cij)
2) corresponding averaged value of BS power level : For G2 BTS : corresponding
averaged value of [BTS_MAX_OUTPUT_POWER - abs(BS_TXPWR)] For
Evolium BTS : corresponding averaged value of [ MAX_POWER_PER_TRXabs(BS_TXPWR)]. BS_TXPWR is the BTS transmitted power defined relatively
to the maximum absolute output power of the BTS. BS_TXPWR is expressed
in dB, whereas BTS_MAX_OUTPUT_POWER is expressed in dBm. Note
that the formula is written independently of the coding used for the variables.
The function abs() gives the absolute value of its argument. 3) corresponding
averaged value of Timing Advance For Cij, the result is given as follows : Cij=Vij
x 254 / Max_i, where Vij represents the real number of measurements, and
Max_i the greatest value of Vij, for i given (see RMS4b). Cij=0 indicates number
of measurements = 0 Cij=254 indicates number of measurements = Max_i
Cij=255 is reserved to indicate overflow. The values of the average BS power
level (2) and the average Timing Advance (3) are directly given, both with a
precision of 0.25. Note that these values (2 and 3) that are indicated in the ASCII
file, which can be obtained via the OBSYNT interface, still have to be divided
by 4, whereas the values that are provided at the user interface are the correct
ones. DL RXQUAL can take values from 0 to 7. Level band i is defined by :
MEAS_STAT_LEV_(i-1)<= RXLEV < MEAS_STAT_LEV_i MEAS_STAT_LEV_0
= -47 dBm, MEAS_STAT_LEV_10 = -110 dBm According to 3GPP, values of
RXLEV lower than -110 dBm are considered as equal to -110 dBm
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
433 / 1392
TMR_RXQUAL_DL_RXLEV_DL
Definition
Table of 10 maximum results. Each cell Ci of the table indicates the greatest
value of the Vij for a i given in RMS4a.
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
434 / 1392
TPR_TIMING_ADVANCE
Definition
Table of 10 results Each cell (i) of the table contains : 1) number of reports in
which Timing Advance is in Timing Advance band i The result is given as follows
: Ci=MAX(ROUND[Vi x 254 / Max], 1), where Vi represents the real number of
measurements, and Max the greatest value of Vi, (see RMS50b). Ci=0 indicates
number of measurements = 0 Ci=254 indicates number of measurements
= Max Ci=255 is reserved to indicate overflow. Timing Advancee band is
defined by : MEAS_STAT_TA_(i-1)<= Timing Advance < MEAS_STAT_TA_i
MEAS_STAT_TA_0 = 0 bper, MEAS_STAT_TA_10 = 63 bper
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
435 / 1392
MAX_TIMING_ADVANCE
Definition
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
436 / 1392
TPR_UL_RXLEV_TA_BAND
Definition
Table of 10 results Each cell (i) of the table contains : average value of UpLink
Rxlev of reports in TA band i. Averaged Rxlev is given with a precision of
2 digits after the comma (step size for coding = 0.01, -110 dBm coded 0,
-109.99 dBm coded 1...). i = 1...10 TA band i is defined by : MEAS_STAT_TA_
(i-1)<= Timing Advance < MEAS_STAT_TA_i MEAS_STAT_TA_0 = 0 bper,
MEAS_STAT_TA_10 = 63 bper. According to 3GPP, values of RXLEV lower
than -110 dBm are considered as equal to -110 dBm
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
437 / 1392
TPR_DL_RXLEV_TA_BAND
Definition
Table of 10 results Each cell (i) of the table contains : average value of DownLink
Rxlev of reports in TA band i. Averaged Rxlev is given with a precision of
2 digits after the comma (step size for coding = 0.01, -110 dBm coded 0,
-109.99 dBm coded 1...). i = 1...10 TA band i is defined by : MEAS_STAT_TA_
(i-1)<= Timing Advance < MEAS_STAT_TA_i MEAS_STAT_TA_0 = 0 bper,
MEAS_STAT_TA_10 = 63 bper. According to 3GPP, values of RXLEV lower
than -110 dBm are considered as equal to -110 dBm
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
438 / 1392
TPR_UL_RXQUAL_TA_BAND
Definition
Table of 10 results Each cell (i) of the table contains : average value of UpLink
Rxqual of reports in TA band i. Averaged Rxqual is given with a precision of 2
digits after the comma (step size for coding = 0.01, 0 coded 0, 0.01 coded 1, ...).
i = 1...10 TA band i is defined by : MEAS_STAT_TA_ (i-1)<= Timing Advance <
MEAS_STAT_TA_i MEAS_STAT_TA_0 = 0 bper, MEAS_STAT_TA_10 = 63 bper.
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
439 / 1392
TPR_DL_RXQUAL_TA_BAND
Definition
Table of 10 results Each cell (i) of the table contains : average value of DownLink
Rxqual of reports in TA band i. Averaged Rxqual is given with a precision of 2
digits after the comma (step size for coding = 0.01, 0 coded 0, 0.01 coded 1, ...).
i = 1...10 TA band i is defined by : MEAS_STAT_TA_ (i-1)<= Timing Advance <
MEAS_STAT_TA_i MEAS_STAT_TA_0 = 0 bper, MEAS_STAT_TA_10 = 63 bper.
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
440 / 1392
TPR_BFI_RXLEV_UL
Definition
Table of 10x10 results Each cell (i,j) of the table contains : 1) number of
reports in which consecutive BFI counter is in BFI band j and UL RXLEV
is reported in level band I (Cij) The result is given as follows : Cij=Vij x
254 / Max_i, where Vij represents the real number of measurements, and
Max_i the greatest value of Vij, for i given (see RMS5b). Cij=0 indicates
number of measurements = 0 Cij=254 indicates number of measurements
= Max_i Cij=255 is reserved to indicate overflow. BFI band is defined by
: MEAS_STAT_BFI_(j-1)<= Consecutive BFI counter < MEAS_STAT_BFI_j
MEAS_STAT_BFI_0 = 0, MEAS_STAT_BFI_10 = 25 Level band i is defined by :
MEAS_STAT_LEV_(i-1)<= RXLEV < MEAS_STAT_LEV_i MEAS_STAT_LEV_0
= -47 dBm, MEAS_STAT_LEV_10 = -110 dBm According to 3GPP, values of
RXLEV lower than -110 dBm are considered as equal to -110 dBm
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
441 / 1392
TMR_BFI_RXLEV_UL
Definition
Table of 10 maximum results. Each cell Ci of the table indicates the greatest
value of the Vij for a i given in RMS5a.
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
442 / 1392
TPR_RADIO_LINK
Definition
Table of 10 results Each cell (i) of the table contains : 1) number of reports in
which Radio linkI counter is in S band i The result is given as follows : Ci=Vi x
254 / Max_i, where Vi represents the real number of measurements, and Max_i
the greatest value of Vi (see RMS6b). Ci=0 indicates number of measurements
= 0 Ci=254 indicates number of measurements = Max_i Ci=255 is reserved
to indicate overflow. S band is defined by : MEAS_STAT_S_(i-1)<= Radio link
counter < MEAS_STAT_S_i MEAS_STAT_S_0 = 0, MEAS_STAT_S_10 = 128
Trigger condition
Whenever the Radio Link counter (S) is in the given interval of MEAS_STAT_S.
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
443 / 1392
MAX_RADIO_LINK
Definition
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
444 / 1392
TPR_PATH_BALANCE
Definition
Table of 10 results Each cell (i) of the table contains : 1) number of reports
in which Path Balance is in Path Balance band i The result is given as
follows : Ci=Vi x 254 / Max_i, where Vi represents the real number of
measurements, and Max_i the greatest value of Vi, (see RMS7b). Ci=0
indicates number of measurements = 0 Ci=254 indicates number of
measurements = Max_i Ci=255 is reserved to indicate overflow. Path Balance
band is defined by : MEAS_STAT_PATH_BALANCE_(i-1)<= Path balance <
MEAS_STAT_PATH_BALANCE_i MEAS_STAT_PATH_BALANCE_0 = -110 dB,
MEAS_STAT_PATH_BALANCE_10 = 110 dB
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
445 / 1392
MAX_PATH_BALANCE
Definition
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
446 / 1392
TPR_CIN
Definition
Table of 10 results per neighbour cell. Each cell i of the table contains
: 1) number of reports in which the C/I related to the neighbour cell is
reported in C/I band i. The result is given as follows : Ci=Vi x 254 /
RMS8b, where Vi represents the real number of measurements Ci=0
indicates number of measurements = 0 Ci=254 indicates number of
measurements = Max_i Ci=255 is reserved to indicate overflow. C/I band
is defined by : MEAS_STAT_PATH_C_I_(i-1)<= C/I < MEAS_STAT_C_I_i
MEAS_STAT_PATH_C_I_0 = -63 dB, MEAS_STAT_PATH_C_I_10 = 63 dB If
EN_BALANCED_CI = TRUE then C/I (dB) = RXLEV_DL + abs(BS_TXPWR
- BS_TXPWR_MAX) - RXLEV_NCELL Note that the formula is written
independently of the coding used for the variables. RXLEV_DL and
RXLEV_NCELL are the received signal levels of the serving and of the
neighbour cells, expressed in dBm. BS_TXPWR is the BTS transmitted power
and BS_TXPWR_MAX is the maximum allowed BTS transmission power.
Both are defined relatively to the maximum absolute output power of the BTS
(BTS_MAX_OUTPUT_POWER). BS_TXPWR and BS_TXPWR_MAX are
expressed in dB. The function abs() gives the absolute value of its argument.
else C/I (dB) = RXLEV_DL (dBm) - RXLEV_NCELL (dBm)
Trigger condition
Whenever a measurement report indicates that C/I value for the call related to
the neighbour cell is included in the corresponding interval.
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
447 / 1392
MR_CIN
Definition
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
448 / 1392
TPR_CIF
Definition
Trigger condition
Whenever a measurement report indicates that C/I value for the extended
measurement frequency is included in the corresponding interval.
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
449 / 1392
MR_CIF
Definition
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
450 / 1392
MAX_POWER_PER_TRX
Definition
Maximum GMSK TRX power level applied at the BTS antenna output connector
in dBm. The power takes into account the different losses (cables, internal
combiners) and the internal/ external leveling but it does not take into account
the BS-TXPWR-MAX, attenuation required by the OMC_R. If the feature
"unbalancing TRX output power per BTS sector" is activated (parameter
"En-Unbalanced-Output-Power" set to 1), the counter is set by the BTS to the
power required by the BSC for the corresponding TRE (i.e. for the TRE on
which is mapped that TRX). If the operator defines a fine attenuation which will
impact the power of TREs in the cell, then RMSpw3 will also reflect this extra
attenuation.
Trigger condition
Sub Domain 1
RMS
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
451 / 1392
18.2.3 Speech
18.2.3.1 All Speech
RMS48b - MAX_AMR_HR_UL_RXLEV_UL (Section 18.2.3.2.2.1 )
18.2.3.2
18.2.3.2.1 All
18.2.3.2.2
18.2.3.2.2.1 RMS48b - MAX_AMR_HR_UL_RXLEV_UL
Long Name
MAX_AMR_HR_UL_RXLEV_UL
Definition
Table of 10 maximum results. Each cell Ci of the table indicates the greatest
value of the Vik for a i given in RMS48a.
Trigger condition
Sub Domain 1
Speech
Sub Domain 2
Sub Domain 3
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
452 / 1392
18.3.2 Channel
18.3.2.1 All Channel
RMS31 - TOT_SEIZ_TCH (Section 18.3.2.2.2.1 )
18.3.2.2 TCH
18.3.2.2.1 All TCH
RMS31 - TOT_SEIZ_TCH (Section 18.3.2.2.2.1 )
18.3.2.2.2 Usage
18.3.2.2.2.1 RMS31 - TOT_SEIZ_TCH
Long Name
TOT_SEIZ_TCH
Definition
Number of successful TCH seizures for the concerned cell. This counter takes
into account TCH in traffic or in signaling mode.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
TRX
Type Name
Type Definition
Set of counters describing result of radio measurements for a given cell / TRX.
External Comment
453 / 1392
454 / 1392
455 / 1392
19.2.2 Handover
19.2.2.1 All Handover
C403a - NB_INC_EXT_TCH_HO_NEW_BAND_ATPT (Section 19.2.2.2.2.1 )
C403b - NB_INC_EXT_TCH_HO_NEW_BAND_SUCC (Section 19.2.2.2.2.2 )
C404a - NB_OUT_EXT_TCH_HO_NEW_BAND_ATPT (Section 19.2.2.2.2.3 )
C404b - NB_OUT_EXT_TCH_HO_NEW_BAND_SUCC (Section 19.2.2.2.2.4 )
C420a - NB_INC_INT_TCH_HO_NEW_BAND_ATPT (Section 19.2.2.2.2.5 )
C420b - NB_INC_INT_TCH_HO_NEW_BAND_SUCC (Section 19.2.2.2.2.6 )
C421a - NB_OUT_INT_TCH_HO_NEW_BAND_ATPT (Section 19.2.2.2.2.7 )
C421b - NB_OUT_INT_TCH_HO_NEW_BAND_SUCC (Section 19.2.2.2.2.8 )
19.2.2.2 TCH
19.2.2.2.1 All TCH
C403a - NB_INC_EXT_TCH_HO_NEW_BAND_ATPT (Section 19.2.2.2.2.1 )
C403b - NB_INC_EXT_TCH_HO_NEW_BAND_SUCC (Section 19.2.2.2.2.2 )
C404a - NB_OUT_EXT_TCH_HO_NEW_BAND_ATPT (Section 19.2.2.2.2.3 )
C404b - NB_OUT_EXT_TCH_HO_NEW_BAND_SUCC (Section 19.2.2.2.2.4 )
456 / 1392
19.2.2.2.2
19.2.2.2.2.1 C403a - NB_INC_EXT_TCH_HO_NEW_BAND_ATPT
Long Name
NB_INC_EXT_TCH_HO_NEW_BAND_ATPT
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
457 / 1392
NB_INC_EXT_TCH_HO_NEW_BAND_SUCC
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
458 / 1392
NB_OUT_EXT_TCH_HO_NEW_BAND_ATPT
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
459 / 1392
NB_OUT_EXT_TCH_HO_NEW_BAND_SUCC
Definition
Trigger condition
External TCH handover including a change of the TCH frequency band, in the
following cases: 1/ 48.008 CLEAR COMMAND message with a cause value of
"handover successful" is received. 2/ 48.008 CLEAR COMMAND (cause =
"normal event/call control") is received while T8 is running. Note: This counter
counts both inter-PLMN and intra-PLMN handover events. In case of multiband
cells, the BCCH frequency band of the target cell will be taken as reference.
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
460 / 1392
NB_INC_INT_TCH_HO_NEW_BAND_ATPT
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
461 / 1392
NB_INC_INT_TCH_HO_NEW_BAND_SUCC
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
462 / 1392
NB_OUT_INT_TCH_HO_NEW_BAND_ATPT
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
463 / 1392
NB_OUT_INT_TCH_HO_NEW_BAND_SUCC
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
464 / 1392
465 / 1392
20.2.2
20.2.2.1 All
E01 - EME_PWR_GSM (Section 20.2.2.2.2.1 )
E02 - EME_PWR_DCS (Section 20.2.2.2.2.2 )
20.2.2.2
20.2.2.2.1 All
20.2.2.2.2
20.2.2.2.2.1 E01 - EME_PWR_GSM
Long Name
EME_PWR_GSM
Definition
Average emitted power at the BTS antenna output connector for the GSM
frequency band (GSM850 or E-GSM or P-GSM). Counter coded in tenth of Watt.
Value 0 indicates that the TRX frequency is neither GSM850 nor E-GSM nor
P-GSM band. Value FFFFh indicates overflow of the measurement period.
Trigger condition
TRE collects permanently power data. At the end of each measurement period,
triggered by reception of EME_DATA_REQ message from the BSC, the average
emitted power is calculated and sent back to the BSC.
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
Counter coded in tenth of Watt. Value 0 indicates that TRX frequency is neither
900 MHz nor 850 MHz. This counter is only reported for cells mapped on
Evolium BTS.
466 / 1392
EME_PWR_DCS
Definition
Average emitted power at the BTS antenna output connector for the DCS
frequency band (DCS1800 or DCS1900). Counter coded in tenth of Watt. Value
0 indicates that the TRX frequency is neither DCS1800 nor DCS1900 band.
Value FFFFh indicates overflow of the measurement period.
Trigger condition
TRE collects permanently power data. At the end of each measurement period,
triggered by reception of EME_DATA_REQ message from the BSC, the average
emitted power is calculated and sent back to the BSC.
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
467 / 1392
468 / 1392
469 / 1392
21.2 Handover
21.2.1 All Handover
V09 - NB_INC_VGCS_HO_SUCC (Section 21.2.2.2.2.1 )
V10 - NB_INC_VGCS_HO_ATPT (Section 21.2.2.2.2.2 )
21.2.2 TCH
21.2.2.1 All TCH
V09 - NB_INC_VGCS_HO_SUCC (Section 21.2.2.2.2.1 )
V10 - NB_INC_VGCS_HO_ATPT (Section 21.2.2.2.2.2 )
470 / 1392
21.2.2.2
21.2.2.2.1 All
21.2.2.2.2
21.2.2.2.2.1 V09 - NB_INC_VGCS_HO_SUCC
Long Name
NB_INC_VGCS_HO_SUCC
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
471 / 1392
NB_INC_VGCS_HO_ATPT
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
472 / 1392
21.3.2.2
21.3.2.2.1 All
21.3.2.2.2
21.3.2.2.2.1 V06 - NB_VGC_RELEASED_VGCS
Long Name
NB_VGC_RELEASED_VGCS
Definition
Trigger condition
Sub Domain 1
Established Phase
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
473 / 1392
21.3.3.2
21.3.3.2.1 All
21.3.3.2.2
21.3.3.2.2.1 V03 - NB_VGCS_ESTABLISHMENT_REQ
Long Name
NB_VGCS_ESTABLISHMENT_REQ
Definition
Trigger condition
This counter is incremented each time the BSS receives a 48.008 VGCS/VBS
ASSIGNMENT REQUEST from the MSC.
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
474 / 1392
NB_VGCS_ESTABLISHMENT_SUCC
Definition
Trigger condition
This counter is incremented each time the BSS sends the first 48.008
VGCS/VBS ASSIGNMENT RESULT to the MSC corresponding to a VGCS/VBS
ASSIGNMENT REQUEST.
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
475 / 1392
NB_CM_SERV_REQ_VGCS
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
476 / 1392
NB_VGC_BLOCKED_VGCS
Definition
Number of blocked VGC due to lack of resources per cell during observation
period.
Trigger condition
This counter is incremented when the BSC cannot allocate the VGCH, i. e.
sends to the MSC: - The 48.008 VGCS/VBS ASSIGNMENT FAILURE message
with cause parameter set to "Resource unavailable (010)" whenever 1/ no TCH
is available and either: - queuing was not requested by the MSC (parameter
"priority.qa" set to "queuing not allowed 0") in case of immediate allocation
(parameter "assignment requirement" set to "immediate and the resources shall
not be de-allocated until the end of the call (channel establishment on demand
forbidden by the MSC) 00000001" or "immediate and the resources may further
be de-allocated by the BSS (channel establishment on demand forbidden by the
MSC) 00000010" ; - queuing was requested by the MSC (parameter "priority.qa"
set to "queuing allowed 1") but disabled in the BSC ; - queuing was requested by
the MSC but the queue is full and no request of lower priority can be dequeued ;
- the request is dequeued due to the reception of higher priority request ; the request is dequeued due to T14 timer expiry ; 2/ the maximum number of
TCH allowed for VGCs has been reached ; - the 48.008 CLEAR REQUEST
message with cause parameter set to "resource unavailable 010" in case of
delayed allocation for a VGCH (i. e. sent over an SCCP connection previously
established with a 48.008 VGCS/VBS ASSIGNMENT REQUEST message
with parameter "assignment requirement" set to "delay allowed 00000000" and
parameter "priority.qa" set to "queuing not allowed 0", whenever no more TCH is
available or the maximum number of TCH allowed for VGCs has been reached.
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
477 / 1392
NB_ASS_REQ_ABLE_PREEMT
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
478 / 1392
NB_VGCS_ASS_REQ_ABLE_TO_PREEMPT
Definition
Trigger condition
This counter is incremented each time the BSC receives from the MSC a
VGCS/VBS ASSIGNEMENT REQUEST message with "Preemption Capability
indicator (pci)" of "Priority" parameter set to "this allocation request may preempt
an existing connection (1)".
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
479 / 1392
21.3.3.3.2
21.3.3.3.2.1 V01 - NB_PTP_CALL_PREEMPTED_VGCS
Long Name
NB_PTP_CALL_PREEMPTED_VGCS
Definition
Number of point-to-point CS-calls pre-empted for VGC channels per cell during
observation period.
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
480 / 1392
21.3.4.2
21.3.4.2.1 All
21.3.4.2.2
21.3.4.2.2.1 V18 - NB_PREEMTED_TCH_VGCS
Long Name
NB_PREEMTED_TCH_VGCS
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
481 / 1392
21.4.2 Channel
21.4.2.1 All Channel
V021 - AV_PARALLEL_TCH_VGCS (Section 21.4.2.2.2.1 )
V022 - MAX_PARALLEL_TCH_VGCS (Section 21.4.2.2.2.2 )
21.4.2.2 TCH
21.4.2.2.1 All TCH
V021 - AV_PARALLEL_TCH_VGCS (Section 21.4.2.2.2.1 )
V022 - MAX_PARALLEL_TCH_VGCS (Section 21.4.2.2.2.2 )
21.4.2.2.2
21.4.2.2.2.1 V021 - AV_PARALLEL_TCH_VGCS
Long Name
AV_PARALLEL_TCH_VGCS
Definition
Average number of parallel TCH in use for VGCS per cell during observation
period. TCH used for VGC listening service and TCH used for VGC talking
service are both counted.
Trigger condition
The BSC takes periodically a sample of the number of busy TCH radio timeslots
allocated for VGCS. The sampling period is set to the value indicated in the
Status Inspection field. At the expiry of the accumulation period, all samples are
averaged with an accuracy of 0.1 (i.e. summed, multiplied by 10 and divided
by the number of samples). The averaged value is rounded up or down to the
nearest value. Note : The reported value shall then be divided by 10 so that the
value that is taken into acount (interger and decimal parts) is the correct one.
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
482 / 1392
MAX_PARALLEL_TCH_VGCS
Definition
Maximum number of parallel TCH in use for VGCS per cell during observation
period. TCH used for VGC listening service and TCH used for VGC talking
service are both counted.
Trigger condition
Whenever a TCH radio timeslot is allocated for VGCS, the BSC determines the
current number of busy TCH radio timeslots allocated to VGCS. This counter is
the maximum value of this number during the accumulation period. Note: both
talker TCH and listener TCH are counted.
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
483 / 1392
21.5.2 Channel
21.5.2.1 All Channel
V13 - NB_VGCS_NOTIFIFICATION_FACCH (Section 21.5.2.2.2.1 )
V19 - NB_PAGING_FACCH (Section 21.5.2.2.2.2 )
21.5.2.2
21.5.2.2.1 All
21.5.2.2.2
21.5.2.2.2.1 V13 - NB_VGCS_NOTIFIFICATION_FACCH
Long Name
NB_VGCS_NOTIFIFICATION_FACCH
Definition
Number of VGC notifications sent over FACCH per cell during observation
period.
Trigger condition
This counter is incremented each time the BSC sends a 48.058 UNIT DATA
REQUEST (NOTIFICATION/FACCH) message to the BTS with the indication
"Group Call Information". Note : this counter does not include paging requests.
Sub Domain 1
Channel
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
484 / 1392
NB_PAGING_FACCH
Definition
Number of PTP pagings sent over FACCH per cell during observation period.
Trigger condition
This counter is incremented each time the BSC sends a 48.058 UNIT DATA
REQUEST (NOTIFICATION/FACCH) message to the BTS with the indication
"Paging Information". Note : this counter does not include notification of VGCS.
Sub Domain 1
Channel
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
485 / 1392
21.5.3.2
21.5.3.2.1 All
21.5.3.2.2
21.5.3.2.2.1 V07 - NB_OUT_VGCS_HO_ATPT
Long Name
NB_OUT_VGCS_HO_ATPT
Definition
Trigger condition
Internal intercell HO, external HO : This counter is incremented each time the
44.018 HANDOVER COMMAND message is sent to the MS on the serving
channel, during a TCH handover procedure for a VGCS talker. Intracell HO :
This counter is incremented each time a 44.018 ASSIGNMENT COMMAND
message is sent to the MS for a TCH handover procedure for a VGCS talker.
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
486 / 1392
NB_OUT_VGCS_HO_SUCC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
487 / 1392
NB_TALKER_CHANGE_VGCS
Definition
Number of talker change in the BSC during observation period. This counter is
the TOTAL number of talker change in the BSC during the observation period.
Trigger condition
This counter is increment each time the BSC sends a 48.008 UPLINK
REQUEST CONFIRMATION message to the MSC.
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
BSC
Type Name
Type Definition
External Comment
488 / 1392
NB_VGCS_QUEUED
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Type Definition
External Comment
489 / 1392
NB_VGCS_ESTABLISHED
Definition
Number of VGC successfully established per BSC during the observation period.
Trigger condition
This counter is incremented each time the BSC sens a 48.008 VGCS/VBS
SETUP ACKNOWLEDGE message to the MSC.
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
BSC
Type Name
Type Definition
External Comment
490 / 1392
491 / 1392
492 / 1392
493 / 1392
494 / 1392
495 / 1392
496 / 1392
497 / 1392
498 / 1392
499 / 1392
22.2
22.2.1 All
22.2.2
22.2.2.1 All
22.2.2.2
22.2.2.2.1 All
22.2.2.2.2
22.2.2.2.2.1 MC940 - Reserve_BSC_1
Long Name
Reserve_BSC_1
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
BSC
Type Name
Overview measurements
Type Definition
External Comment
500 / 1392
Reserve_BSC_2
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
BSC
Type Name
Overview measurements
Type Definition
External Comment
501 / 1392
Reserve_BSC_3
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
BSC
Type Name
Overview measurements
Type Definition
External Comment
502 / 1392
Reserve_BSC_4
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
BSC
Type Name
Overview measurements
Type Definition
External Comment
503 / 1392
Reserve_BSC_5
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
BSC
Type Name
Overview measurements
Type Definition
External Comment
504 / 1392
Reserve_BSC_6
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
BSC
Type Name
Overview measurements
Type Definition
External Comment
505 / 1392
NB_CALL_TFO_AMR
Definition
For future usage (Number of TCH assigned using AMR for which TFO has
been successfully established).
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
506 / 1392
NB_HO_INTER_TFO_AMR
Definition
For future usage (Number of TCH assigned using AMR for which TFO has been
successfully established after an inter cell handover).
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
507 / 1392
NB_HO_EXT_TFO_AMR
Definition
For future usage (Number of TCH assigned using AMR for which TFO has been
successfully established after an external handover).
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
508 / 1392
22.3 Handover
22.3.1 All Handover
MC101 - NB_INTRA_SDCCH_HO_PREP_FAIL_CONG (Section 22.3.4.5.2.1 )
MC1040 - NB_HO_ATPT_23_TrafHandover (Section 22.3.5.3.2.1 )
MC1044 - NB_HO_ATPT_24_gencapture (Section 22.3.5.3.2.2 )
MC1050 - NB_HO_22_TooShortDistance (Section 22.3.5.3.2.3 )
MC151 - NB_INC_IDR_SUCC (29) (Section 22.3.2.2.2.1 )
MC153 - NB_INC_IDR_REQ (Section 22.3.2.2.2.2 )
MC41b - NB_INC_EXT_TCH_HO_PREP_FAIL_NO_TTCH (Section
22.3.7.4.2.1 )
MC448a - NB_TCH_HO_ATPT_26_BadQualHR (Section 22.3.7.3.2.1 )
MC448b - NB_TCH_HO_ATPT_27_GoodQualFR (Section 22.3.7.3.2.2 )
MC449 - NB_TCH_HO_ATPT_28_FastTraffic (Section 22.3.7.3.2.3 )
MC460a - NB_TCH_EMERGENCY_HO_PRESERVATION (Section
22.3.7.3.3.1 )
MC461 - NB_TCH_HO_ATPT_29_TFO (Section 22.3.7.3.2.4 )
MC462a - NB_OUT_INTER_PLMN_TCH_HO_REQ (Section 22.3.7.8.2.1 )
MC462b - NB_OUT_INTER_PLMN_TCH_HO_ATPT (Section 22.3.7.8.2.2 )
MC462c - NB_OUT_INTER_PLMN_TCH_HO_SUCC (Section 22.3.7.8.2.3 )
MC463a - NB_INC_INTER_PLMN_TCH_HO_REQ (Section 22.3.7.4.2.2 )
MC463b - NB_INC_INTER_PLMN_TCH_HO_ATPT (Section 22.3.7.4.2.3 )
MC463c - NB_INC_INTER_PLMN_TCH_HO_SUCC (Section 22.3.7.4.2.4 )
MC480 - NB_TCH_HO_REQ_30_ReturnCSZone (Section 22.3.3.2.2.1 )
MC481 - NB_TCH_HO_ATPT_30_ReturnCSZone (Section 22.3.3.2.2.2 )
MC541 - NB_INC_EXT_TCH_HO_PREP_FAIL_R_ABIS (Section 22.3.7.4.2.5 )
MC541a - NB_INC_EXT_TCH_HO_PREP_FAIL_CONG_R_ABIS (Section
22.3.7.4.2.6 )
MC551 - NB_INC_INT_TCH_HO_PREP_FAIL_CONG_R_ABIS (Section
22.3.7.5.2.1 )
MC555 - NB_INC_IDR_PREP_FAIL_CONG_R_ABIS (Section 22.3.2.2.2.3 )
MC561 - NB_INTRA_TCH_HO_PREP_FAIL_CONG_R_ABIS (Section
22.3.7.6.2.1 )
MC586a - NB_TCH_HO_ATPT_10_TooLowLevUpInZone (Section 22.3.7.3.2.5
)
MC586b - NB_TCH_HO_ATPT_11_TooLowLevDownInZone (Section
22.3.7.3.2.6 )
MC586c - NB_TCH_HO_ATPT_13_TooHighLevUpDownOutZone (Section
22.3.7.3.2.7 )
MC607 - NB_SDCCH_HO_20_HighLevNeigCellForcDR (Section 22.3.4.2.2.1 )
MC642 - NB_INC_EXT_HO_SUCC (Section 22.3.5.4.2.1 )
509 / 1392
510 / 1392
511 / 1392
22.3.2.2 Internal
22.3.2.2.1 All Internal
MC151 - NB_INC_IDR_SUCC (29) (Section 22.3.2.2.2.1 )
MC153 - NB_INC_IDR_REQ (Section 22.3.2.2.2.2 )
MC555 - NB_INC_IDR_PREP_FAIL_CONG_R_ABIS (Section 22.3.2.2.2.3 )
22.3.2.2.2 Incoming
22.3.2.2.2.1 MC151 - NB_INC_IDR_SUCC (29)
Long Name
NB_INC_IDR_SUCC (29)
Definition
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Incoming
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
512 / 1392
NB_INC_IDR_REQ
Definition
Trigger condition
Whenever the BSC process responsible for handover procedure selects the
target cell for forced or normal internal directed retry.
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Incoming
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
513 / 1392
NB_INC_IDR_PREP_FAIL_CONG_R_ABIS
Definition
Trigger condition
1) Whenever there are no free TCH in the target cell during a forced or normal
internal directed retry. 2) Whenever no TCH resource is available on A-bis
interface for a forced or normal internal directed retry. (not valid in B7). Note 1:
In MX BSC, this counter is incremented whenever a TCH cannot be not allocated
due to the TCH processing capacity of CCP reaches the limit defined by the
MAX_TCH_PER_CCP parameter. In this case, MC926 is also incremented by
one. Note 2: In IP mode, this counter is increased by 1 if: - the cell mapped
on a BTS is in IP congestion status; - or the TCH processing capacity of
AbisBTSGroup reaches the limit defined by the NB_MAX_ACTIVE_TCH_TS
parameter
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Incoming
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
514 / 1392
22.3.3.2
22.3.3.2.1 All
22.3.3.2.2
22.3.3.2.2.1 MC480 - NB_TCH_HO_REQ_30_ReturnCSZone
Long Name
NB_TCH_HO_REQ_30_ReturnCSZone
Definition
Trigger condition
Whenever the BSC detects that a TCH needs to be moved from PS zone to
CS zone, I.e. whenever at MAX_SPDCH_LIMIT calculation time, the BSC
detects that 1 TCH is allocated in both MAX_SPDCH_LIMIT zone and the non
pre-emptable PS zone and EN_RETURN_CS_ZONE_HO = Enabled.
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
515 / 1392
NB_TCH_HO_ATPT_30_ReturnCSZone
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
516 / 1392
NB_INC_EXT_TCH_3G_2G_HO_PREP_FAIL_3GCONG
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
517 / 1392
22.3.4 SDCCH
22.3.4.1 All SDCCH
MC101 - NB_INTRA_SDCCH_HO_PREP_FAIL_CONG (Section 22.3.4.5.2.1 )
MC607 - NB_SDCCH_HO_20_HighLevNeigCellForcDR (Section 22.3.4.2.2.1 )
MC81 - NB_INC_EXT_SDCCH_HO_PREP_FAIL_CONG (Section 22.3.4.3.2.1
)
MC91 - NB_INC_INT_SDCCH_HO_PREP_FAIL_CONG (Section 22.3.4.4.2.1 )
22.3.4.2 Cause
22.3.4.2.1 All Cause
MC607 - NB_SDCCH_HO_20_HighLevNeigCellForcDR (Section 22.3.4.2.2.1 )
22.3.4.2.2
22.3.4.2.2.1 MC607 - NB_SDCCH_HO_20_HighLevNeigCellForcDR
Long Name
NB_SDCCH_HO_20_HighLevNeigCellForcDR
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
518 / 1392
22.3.4.3.2
22.3.4.3.2.1 MC81 - NB_INC_EXT_SDCCH_HO_PREP_FAIL_CONG
Long Name
NB_INC_EXT_SDCCH_HO_PREP_FAIL_CONG
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
519 / 1392
22.3.4.4.2
22.3.4.4.2.1 MC91 - NB_INC_INT_SDCCH_HO_PREP_FAIL_CONG
Long Name
NB_INC_INT_SDCCH_HO_PREP_FAIL_CONG
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Incoming Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
520 / 1392
22.3.4.5 Intra
22.3.4.5.1 All Intra
MC101 - NB_INTRA_SDCCH_HO_PREP_FAIL_CONG (Section 22.3.4.5.2.1 )
22.3.4.5.2
22.3.4.5.2.1 MC101 - NB_INTRA_SDCCH_HO_PREP_FAIL_CONG
Long Name
NB_INTRA_SDCCH_HO_PREP_FAIL_CONG
Definition
Trigger condition
Sub Domain 1
SDCCH
Sub Domain 2
Intra
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
521 / 1392
22.3.5 SDCCH+TCH
22.3.5.1 All SDCCH+TCH
MC1040 - NB_HO_ATPT_23_TrafHandover (Section 22.3.5.3.2.1 )
MC1044 - NB_HO_ATPT_24_gencapture (Section 22.3.5.3.2.2 )
MC1050 - NB_HO_22_TooShortDistance (Section 22.3.5.3.2.3 )
MC642 - NB_INC_EXT_HO_SUCC (Section 22.3.5.4.2.1 )
MC643 - NB_INC_EXT_HO_EXEC_FAIL_MS_ACCESS (Section 22.3.5.4.2.2 )
MC645a - NB_OUT_EXT_REAL_HO_REQ (Section 22.3.5.7.2.1 )
MC646 - NB_OUT_EXT_HO_SUCC (Section 22.3.5.7.2.2 )
MC647 - NB_OUT_EXT_HO_EXEC_FAIL_REV (Section 22.3.5.7.2.3 )
MC648 - NB_OUT_EXT_HO_EXEC_FAIL_NO_REV (Section 22.3.5.7.2.4 )
MC650 - NB_OUT_EXT_HO_ATPT (Section 22.3.5.7.2.5 )
MC652 - NB_INC_INT_HO_SUCC (Section 22.3.5.5.2.1 )
MC653 - NB_INC_INT_HO_EXEC_FAIL_MS_ACCESS (Section 22.3.5.5.2.2 )
MC655a - NB_OUT_INT_HO_REQ (Section 22.3.5.8.2.1 )
MC656 - NB_OUT_INT_HO_SUCC (Section 22.3.5.8.2.2 )
MC657 - NB_OUT_INT_HO_EXEC_FAIL_REV (Section 22.3.5.8.2.3 )
MC658 - NB_OUT_INT_HO_EXEC_FAIL_NO_REV (Section 22.3.5.8.2.4 )
MC660 - NB_OUT_INT_HO_ATPT (Section 22.3.5.8.2.5 )
MC662 - NB_INTRA_HO_SUCC (Section 22.3.5.6.2.1 )
MC663 - NB_INTRA_HO_EXEC_FAIL_NO_REV (Section 22.3.5.6.2.2 )
MC667 - NB_INTRA_HO_EXEC_FAIL_REV (Section 22.3.5.6.2.3 )
MC670 - NB_HO_2_TooLowQualUp (Section 22.3.5.3.2.4 )
MC671 - NB_HO_3_TooLowLevUp (Section 22.3.5.3.2.5 )
MC672 - NB_HO_4_TooLowQualDown (Section 22.3.5.3.2.6 )
MC673 - NB_HO_5_TooLowLevDown (Section 22.3.5.3.2.7 )
MC674 - NB_HO_6_TooLongDistance (Section 22.3.5.3.2.8 )
MC675 - NB_HO_MSC_TRIG (Section 22.3.5.3.2.9 )
MC676 - NB_HO_15_TooHighLevInterfUp (Section 22.3.5.3.2.10 )
MC677 - NB_HO_16_TooHighLevInterfDown (Section 22.3.5.3.2.11 )
MC678 - NB_HO_12_TooLowPowBudg (Section 22.3.5.3.2.12 )
MC679 - NB_HO_21_HighLevNeigCellPrefBand (Section 22.3.5.3.2.13 )
MC785a - NB_HO_7_ConsBadSACCHmicroCell (Section 22.3.5.3.2.14 )
MC785d - NB_HO_17_TooLowLevUpMicroCell (Section 22.3.5.3.2.15 )
MC785e - NB_HO_18_TooLowLevDownMicroCell (Section 22.3.5.3.2.16 )
MC785f - NB_HO_14_HighLevNeigLowCellSlowMS (Section 22.3.5.3.2.17 )
MC820 - NB_INC_EXT_HO_REQ (Section 22.3.5.4.2.3 )
MC821 - NB_INC_EXT_HO_ATPT (Section 22.3.5.4.2.4 )
522 / 1392
22.3.5.2
22.3.5.2.1 All
22.3.5.2.2
22.3.5.2.2.1 MC922a - NB_INC_EXT_3G_2G_HO_REQ
Long Name
NB_INC_EXT_3G_2G_HO_REQ
Definition
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
523 / 1392
NB_INC_EXT_3G_2G_HO_SUCC
Definition
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
524 / 1392
NB_INC_EXT_3G_2G_HO_EXEC_FAIL_MS_ACC
Definition
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
525 / 1392
NB_INC_EXT_3G_2G_HO_ATPT
Definition
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
526 / 1392
22.3.5.3 Cause
22.3.5.3.1 All Cause
MC1040 - NB_HO_ATPT_23_TrafHandover (Section 22.3.5.3.2.1 )
MC1044 - NB_HO_ATPT_24_gencapture (Section 22.3.5.3.2.2 )
MC1050 - NB_HO_22_TooShortDistance (Section 22.3.5.3.2.3 )
MC670 - NB_HO_2_TooLowQualUp (Section 22.3.5.3.2.4 )
MC671 - NB_HO_3_TooLowLevUp (Section 22.3.5.3.2.5 )
MC672 - NB_HO_4_TooLowQualDown (Section 22.3.5.3.2.6 )
MC673 - NB_HO_5_TooLowLevDown (Section 22.3.5.3.2.7 )
MC674 - NB_HO_6_TooLongDistance (Section 22.3.5.3.2.8 )
MC675 - NB_HO_MSC_TRIG (Section 22.3.5.3.2.9 )
MC676 - NB_HO_15_TooHighLevInterfUp (Section 22.3.5.3.2.10 )
MC677 - NB_HO_16_TooHighLevInterfDown (Section 22.3.5.3.2.11 )
MC678 - NB_HO_12_TooLowPowBudg (Section 22.3.5.3.2.12 )
MC679 - NB_HO_21_HighLevNeigCellPrefBand (Section 22.3.5.3.2.13 )
MC785a - NB_HO_7_ConsBadSACCHmicroCell (Section 22.3.5.3.2.14 )
MC785d - NB_HO_17_TooLowLevUpMicroCell (Section 22.3.5.3.2.15 )
MC785e - NB_HO_18_TooLowLevDownMicroCell (Section 22.3.5.3.2.16 )
MC785f - NB_HO_14_HighLevNeigLowCellSlowMS (Section 22.3.5.3.2.17 )
22.3.5.3.2
22.3.5.3.2.1 MC1040 - NB_HO_ATPT_23_TrafHandover
Long Name
NB_HO_ATPT_23_TrafHandover
Definition
MC1040=C440+C445
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
527 / 1392
NB_HO_ATPT_24_gencapture
Definition
MC1044=C444+C446
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
528 / 1392
NB_HO_22_TooShortDistance
Definition
MC1050=C450+C454
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
529 / 1392
NB_HO_2_TooLowQualUp
Definition
MC670=C470+C510
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
530 / 1392
NB_HO_3_TooLowLevUp
Definition
MC671=C471+C511
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
531 / 1392
NB_HO_4_TooLowQualDown
Definition
MC672=C472+C512
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
532 / 1392
NB_HO_5_TooLowLevDown
Definition
MC673=C473+C513
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
533 / 1392
NB_HO_6_TooLongDistance
Definition
MC674=C474+C514
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
534 / 1392
NB_HO_MSC_TRIG
Definition
MC675=C75+C115
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
535 / 1392
NB_HO_15_TooHighLevInterfUp
Definition
MC676=C476+C516
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
536 / 1392
NB_HO_16_TooHighLevInterfDown
Definition
MC677=C477+C517
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
537 / 1392
NB_HO_12_TooLowPowBudg
Definition
MC678=C478+C518
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
538 / 1392
NB_HO_21_HighLevNeigCellPrefBand
Definition
MC679=C479+C519
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
539 / 1392
NB_HO_7_ConsBadSACCHmicroCell
Definition
MC785a=C585a+C605a
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
540 / 1392
NB_HO_17_TooLowLevUpMicroCell
Definition
MC785d=C585d+C605d
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
541 / 1392
NB_HO_18_TooLowLevDownMicroCell
Definition
MC785e=C585e+C605e
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
542 / 1392
NB_HO_14_HighLevNeigLowCellSlowMS
Definition
MC785f=C585f+C605f
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
543 / 1392
22.3.5.4.2
22.3.5.4.2.1 MC642 - NB_INC_EXT_HO_SUCC
Long Name
NB_INC_EXT_HO_SUCC
Definition
MC642=C42+C82
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
544 / 1392
NB_INC_EXT_HO_EXEC_FAIL_MS_ACCESS
Definition
MC643=C43+C83
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
545 / 1392
NB_INC_EXT_HO_REQ
Definition
MC820=C220+C310
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
546 / 1392
NB_INC_EXT_HO_ATPT
Definition
MC821=C221+C311
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
547 / 1392
22.3.5.5.2
22.3.5.5.2.1 MC652 - NB_INC_INT_HO_SUCC
Long Name
NB_INC_INT_HO_SUCC
Definition
MC652=C52+C92
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Incoming Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
548 / 1392
NB_INC_INT_HO_EXEC_FAIL_MS_ACCESS
Definition
MC653=C53+C93
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Incoming Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
549 / 1392
NB_INC_INT_HO_REQ
Definition
MC830=C230+C330
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Incoming Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
550 / 1392
NB_INC_INT_HO_ATPT
Definition
MC831=C231+C331
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Incoming Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
551 / 1392
22.3.5.6 Intra
22.3.5.6.1 All Intra
MC662 - NB_INTRA_HO_SUCC (Section 22.3.5.6.2.1 )
MC663 - NB_INTRA_HO_EXEC_FAIL_NO_REV (Section 22.3.5.6.2.2 )
MC667 - NB_INTRA_HO_EXEC_FAIL_REV (Section 22.3.5.6.2.3 )
MC870 - NB_INTRA_HO_REQ (Section 22.3.5.6.2.4 )
MC871 - NB_INTRA_HO_ATPT (Section 22.3.5.6.2.5 )
22.3.5.6.2
22.3.5.6.2.1 MC662 - NB_INTRA_HO_SUCC
Long Name
NB_INTRA_HO_SUCC
Definition
MC662=C62+C102
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Intra
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
552 / 1392
NB_INTRA_HO_EXEC_FAIL_NO_REV
Definition
MC663=C63+C103
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Intra
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
553 / 1392
NB_INTRA_HO_EXEC_FAIL_REV
Definition
MC667=C67+C107
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Intra
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
554 / 1392
NB_INTRA_HO_REQ
Definition
MC870=C270+C360
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Intra
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
555 / 1392
NB_INTRA_HO_ATPT
Definition
MC871=C271+C361
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Intra
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
556 / 1392
22.3.5.7.2
22.3.5.7.2.1 MC645a - NB_OUT_EXT_REAL_HO_REQ
Long Name
NB_OUT_EXT_REAL_HO_REQ
Definition
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
557 / 1392
NB_OUT_EXT_HO_SUCC
Definition
MC646=C46+C86
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
558 / 1392
NB_OUT_EXT_HO_EXEC_FAIL_REV
Definition
MC647=C47+C87
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
559 / 1392
NB_OUT_EXT_HO_EXEC_FAIL_NO_REV
Definition
MC648=C48+C88
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
560 / 1392
NB_OUT_EXT_HO_ATPT
Definition
MC650=C50+C90
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
561 / 1392
22.3.5.8.2
22.3.5.8.2.1 MC655a - NB_OUT_INT_HO_REQ
Long Name
NB_OUT_INT_HO_REQ
Definition
MC655a=C55a+C95a
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Outgoing Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
562 / 1392
NB_OUT_INT_HO_SUCC
Definition
MC656=C56+C96
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Outgoing Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
563 / 1392
NB_OUT_INT_HO_EXEC_FAIL_REV
Definition
MC657=C57+C97
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Outgoing Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
564 / 1392
NB_OUT_INT_HO_EXEC_FAIL_NO_REV
Definition
MC658=C58+C98
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Outgoing Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
565 / 1392
NB_OUT_INT_HO_ATPT
Definition
MC660=C60+C100
Trigger condition
Sub Domain 1
SDCCH+TCH
Sub Domain 2
Outgoing Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
566 / 1392
22.3.6 Speech
22.3.6.1 All Speech
MC936 - NB_HO_INTER_TFO_AMR_WB (Section 22.3.6.2.2.1 )
MC937 - NB_HO_EXT_TFO_AMR_WB (Section 22.3.6.2.2.2 )
22.3.6.2 TFO
22.3.6.2.1 All TFO
MC936 - NB_HO_INTER_TFO_AMR_WB (Section 22.3.6.2.2.1 )
MC937 - NB_HO_EXT_TFO_AMR_WB (Section 22.3.6.2.2.2 )
22.3.6.2.2
22.3.6.2.2.1 MC936 - NB_HO_INTER_TFO_AMR_WB
Long Name
NB_HO_INTER_TFO_AMR_WB
Definition
Number of TCH assigned using AMR-WB for which TFO has been successfully
established after an inter cell handover
Trigger condition
For each assigned TCH further to an inter cell handover, the counter is
incremented the first time a 48.058 TFO REPORT message is received by the
BSC, indicating that TFO is established (i.e. TFO = 1 in the TFO Status IE) and
the used codec is an AMR WB one (i.e. FR sv5). Note 1: This counter shall be
incremented only once per assigned TCH (i.e. the first time it is received for the
assigned TCH). Note 2: This means that the counter is incremented only if the
TCH is assigned to serve an incoming inter-cell handover.
Sub Domain 1
Speech
Sub Domain 2
TFO
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
567 / 1392
NB_HO_EXT_TFO_AMR_WB
Definition
Number of TCH assigned using AMR-WB for which TFO has been successfully
established after an external handover
Trigger condition
Sub Domain 1
Speech
Sub Domain 2
TFO
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
568 / 1392
22.3.7 TCH
22.3.7.1 All TCH
MC41b - NB_INC_EXT_TCH_HO_PREP_FAIL_NO_TTCH (Section
22.3.7.4.2.1 )
MC448a - NB_TCH_HO_ATPT_26_BadQualHR (Section 22.3.7.3.2.1 )
MC448b - NB_TCH_HO_ATPT_27_GoodQualFR (Section 22.3.7.3.2.2 )
MC449 - NB_TCH_HO_ATPT_28_FastTraffic (Section 22.3.7.3.2.3 )
MC460a - NB_TCH_EMERGENCY_HO_PRESERVATION (Section
22.3.7.3.3.1 )
MC461 - NB_TCH_HO_ATPT_29_TFO (Section 22.3.7.3.2.4 )
MC462a - NB_OUT_INTER_PLMN_TCH_HO_REQ (Section 22.3.7.8.2.1 )
MC462b - NB_OUT_INTER_PLMN_TCH_HO_ATPT (Section 22.3.7.8.2.2 )
MC462c - NB_OUT_INTER_PLMN_TCH_HO_SUCC (Section 22.3.7.8.2.3 )
MC463a - NB_INC_INTER_PLMN_TCH_HO_REQ (Section 22.3.7.4.2.2 )
MC463b - NB_INC_INTER_PLMN_TCH_HO_ATPT (Section 22.3.7.4.2.3 )
MC463c - NB_INC_INTER_PLMN_TCH_HO_SUCC (Section 22.3.7.4.2.4 )
MC541 - NB_INC_EXT_TCH_HO_PREP_FAIL_R_ABIS (Section 22.3.7.4.2.5 )
MC541a - NB_INC_EXT_TCH_HO_PREP_FAIL_CONG_R_ABIS (Section
22.3.7.4.2.6 )
MC551 - NB_INC_INT_TCH_HO_PREP_FAIL_CONG_R_ABIS (Section
22.3.7.5.2.1 )
MC561 - NB_INTRA_TCH_HO_PREP_FAIL_CONG_R_ABIS (Section
22.3.7.6.2.1 )
MC586a - NB_TCH_HO_ATPT_10_TooLowLevUpInZone (Section 22.3.7.3.2.5
)
MC586b - NB_TCH_HO_ATPT_11_TooLowLevDownInZone (Section
22.3.7.3.2.6 )
MC586c - NB_TCH_HO_ATPT_13_TooHighLevUpDownOutZone (Section
22.3.7.3.2.7 )
MC710 - NB_TCH_OUT_HO_REQ_TRX (Section 22.3.7.7.2.1 )
MC922e - NB_INC_EXT_TCH_3G_2G_HO_EMERGENCY_REQ (Section
22.3.7.2.2.1 )
MC922f - NB_INC_EXT_TCH_3G_2G_HO_REQ (Section 22.3.7.2.2.2 )
MC924b - NB_OUT_2G_3G_HO_REQ (Section 22.3.7.8.2.4 )
MC924c - NB_OUT_2G_3G_HO_SUCC (Section 22.3.7.8.2.5 )
MC924d - NB_OUT_2G_3G_HO_ATPT (Section 22.3.7.8.2.6 )
MC924e - NB_OUT_2G_3G_HO_EXEC_FAIL_NO_REV (Section 22.3.7.8.2.7 )
MC924f - NB_OUT_2G_3G_HO_EXEC_FAIL_REV (Section 22.3.7.8.2.8 )
MC924g - NB_OUT_2G_3G_HO_PREP_FAIL (Section 22.3.7.8.2.9 )
MC934 - NB_INC_EXT_TCH_HO_PREP_FAIL_PMIS (Section 22.3.7.4.2.7 )
569 / 1392
22.3.7.2
22.3.7.2.1 All
22.3.7.2.2
22.3.7.2.2.1 MC922e - NB_INC_EXT_TCH_3G_2G_HO_EMERGENCY_REQ
Long Name
NB_INC_EXT_TCH_3G_2G_HO_EMERGENCY_REQ
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
570 / 1392
NB_INC_EXT_TCH_3G_2G_HO_REQ
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
571 / 1392
22.3.7.3 Cause
22.3.7.3.1 All Cause
MC448a - NB_TCH_HO_ATPT_26_BadQualHR (Section 22.3.7.3.2.1 )
MC448b - NB_TCH_HO_ATPT_27_GoodQualFR (Section 22.3.7.3.2.2 )
MC449 - NB_TCH_HO_ATPT_28_FastTraffic (Section 22.3.7.3.2.3 )
MC460a - NB_TCH_EMERGENCY_HO_PRESERVATION (Section
22.3.7.3.3.1 )
MC461 - NB_TCH_HO_ATPT_29_TFO (Section 22.3.7.3.2.4 )
MC586a - NB_TCH_HO_ATPT_10_TooLowLevUpInZone (Section 22.3.7.3.2.5
)
MC586b - NB_TCH_HO_ATPT_11_TooLowLevDownInZone (Section
22.3.7.3.2.6 )
MC586c - NB_TCH_HO_ATPT_13_TooHighLevUpDownOutZone (Section
22.3.7.3.2.7 )
22.3.7.3.2
22.3.7.3.2.1 MC448a - NB_TCH_HO_ATPT_26_BadQualHR
Long Name
NB_TCH_HO_ATPT_26_BadQualHR
Definition
Number of intracell handover attempts, with the cause 26: "HR to FR channel
adaptation due to bad radio quality" on a TCH channel.
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
572 / 1392
NB_TCH_HO_ATPT_27_GoodQualFR
Definition
Number of intracell handover attempts, with the cause 27: "FR to HR channel
adaptation due to good radio quality" on a TCH channel.
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
573 / 1392
NB_TCH_HO_ATPT_28_FastTraffic
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
574 / 1392
NB_TCH_HO_ATPT_29_TFO
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
575 / 1392
NB_TCH_HO_ATPT_10_TooLowLevUpInZone
Definition
Number of intra-cell handover attempts, with cause 10 "Inner zone uplink level
too low" on TCH channel (in HR or FR usage). This counter is related to
concentric cell environment.
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
576 / 1392
NB_TCH_HO_ATPT_11_TooLowLevDownInZone
Definition
Number of intra-cell handover attempts, with cause 11: "Inner zone downlink
level too low" on TCH channel (in HR or FR usage). This counter is related to
concentric cell environment.
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
577 / 1392
NB_TCH_HO_ATPT_13_TooHighLevUpDownOutZone
Definition
Number of intra-cell handover attempts, with cause 13: "Outer zone uplink and
downlink levels too high" on TCH channel (in HR or FR usage). This counter is
related to concentric cell environment.
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
578 / 1392
22.3.7.3.3 Success
22.3.7.3.3.1 MC460a - NB_TCH_EMERGENCY_HO_PRESERVATION
Long Name
NB_TCH_EMERGENCY_HO_PRESERVATION
Definition
Number of high priority TCH requests served when 1) the number of free TCH
timeslots is less than or equal to NUM_TCH_EGNCY_HO and, 2) the queue for
this cell is not empty.
Trigger condition
The counter is incremented on the serving cell whenever the 48.058 CHANNEL
ACTIVATION message allocating a TCH channel is sent and the following two
conditions are both fulfilled: 1) the TCH is allocated to serve i) an internal
handover Cause 2, 3, 4, 5, 6, 7, 10, 11, 12, 15, 16, 17, 18, 22, 27, or, ii) an
external handover Cause "Uplink quality", "Uplink strength", "Downlink quality",
"Downlink strength", "Distance", or iii) a normal assignment or an external
handover with the preemption indicator set (i.e. Preemption Capability Indicator
= 1 and EN_TCH_PREEMPT = Enable). 2) the number of free TCH timeslots
is less than or equal to NUM_TCH_EGNCY_HO and there is at least one
request queued for this cell. Note 1: This counter counts both inter-PLMN
and intra-PLMN handover events. Note 2: The HMI name of the parameter
NUM_TCH_EGNCY_HO is "NUM_TCH_EMERGENCY_HO".
Sub Domain 1
TCH
Sub Domain 2
Cause
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
579 / 1392
22.3.7.4.2
22.3.7.4.2.1 MC41b - NB_INC_EXT_TCH_HO_PREP_FAIL_NO_TTCH
Long Name
NB_INC_EXT_TCH_HO_PREP_FAIL_NO_TTCH
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
580 / 1392
NB_INC_INTER_PLMN_TCH_HO_REQ
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
581 / 1392
NB_INC_INTER_PLMN_TCH_HO_ATPT
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
582 / 1392
NB_INC_INTER_PLMN_TCH_HO_SUCC
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
583 / 1392
NB_INC_EXT_TCH_HO_PREP_FAIL_R_ABIS
Definition
Trigger condition
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Sub Domain 1
TCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
584 / 1392
NB_INC_EXT_TCH_HO_PREP_FAIL_CONG_R_ABIS
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
585 / 1392
NB_INC_EXT_TCH_HO_PREP_FAIL_PMIS
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Incoming External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
586 / 1392
22.3.7.5.2
22.3.7.5.2.1 MC551 - NB_INC_INT_TCH_HO_PREP_FAIL_CONG_R_ABIS
Long Name
NB_INC_INT_TCH_HO_PREP_FAIL_CONG_R_ABIS
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Incoming Internal
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
587 / 1392
22.3.7.6 Intra
22.3.7.6.1 All Intra
MC561 - NB_INTRA_TCH_HO_PREP_FAIL_CONG_R_ABIS (Section
22.3.7.6.2.1 )
22.3.7.6.2
22.3.7.6.2.1 MC561 - NB_INTRA_TCH_HO_PREP_FAIL_CONG_R_ABIS
Long Name
NB_INTRA_TCH_HO_PREP_FAIL_CONG_R_ABIS
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Intra
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
588 / 1392
22.3.7.7 Outgoing
22.3.7.7.1 All Outgoing
MC710 - NB_TCH_OUT_HO_REQ_TRX (Section 22.3.7.7.2.1 )
22.3.7.7.2
22.3.7.7.2.1 MC710 - NB_TCH_OUT_HO_REQ_TRX
Long Name
NB_TCH_OUT_HO_REQ_TRX
Definition
Trigger condition
1) Intracell HO: Whenever the BSC process responsible for the handover
procedure starts an intra cell TCH handover procedure. 2) Internal intercell HO:
Whenever the BSC process responsible for the handover procedure selects a
target cell (among a list of target cells) for internal inter cell TCH handover. 3)
External HO: Whenever a 48.008 HANDOVER REQUIRED message is sent on
A interface to the MSC. If more than one 48.008 HANDOVER REQUIRED is
sent in the frame of the same Handover procedure, the counter is incremented
only once. 48.008 HANDOVER REQUIRED is sent in following situations: 1) An
external handover alarm has been raised, with corresponding list of candidate
cells. 2) The list of candidate cells for the current alarm has been updated.
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Sub Domain 1
TCH
Sub Domain 2
Outgoing
Sub Domain 3
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
589 / 1392
22.3.7.8.2
22.3.7.8.2.1 MC462a - NB_OUT_INTER_PLMN_TCH_HO_REQ
Long Name
NB_OUT_INTER_PLMN_TCH_HO_REQ
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
590 / 1392
NB_OUT_INTER_PLMN_TCH_HO_ATPT
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
591 / 1392
NB_OUT_INTER_PLMN_TCH_HO_SUCC
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
592 / 1392
NB_OUT_2G_3G_HO_REQ
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
593 / 1392
NB_OUT_2G_3G_HO_SUCC
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
594 / 1392
NB_OUT_2G_3G_HO_ATPT
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
595 / 1392
NB_OUT_2G_3G_HO_EXEC_FAIL_NO_REV
Definition
Trigger condition
Whenever the timer supervising the handover procedure on the serving cell
(T3121), expires during an external TCH handover to a 3G cell, except if a
48.008 CLEAR COMMAND with "normal event/call control" cause was received
from the MSC, leading to a normal call release. In such a case, the handover
is considered as successful. Note: This counter counts both inter-PLMN and
intra-PLMN handover events.
Sub Domain 1
TCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
596 / 1392
NB_OUT_2G_3G_HO_EXEC_FAIL_REV
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
597 / 1392
NB_OUT_2G_3G_HO_PREP_FAIL
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Outgoing External
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
598 / 1392
599 / 1392
600 / 1392
22.4.2 BSC
22.4.2.1 All BSC
MC928a - NB_TCH_DROP_CAUSE_TOO_LOW_QUALITY_UL (Section
22.4.2.2.2.1 )
MC959 - NB_PS_CHAN_REQD (Section 22.4.2.2.2.2 )
MC960 NB_DISCARDED_PS_CHAN_REQD_BECAUSE_GSL_CONGESTION
(Section 22.4.2.2.2.3 )
MC962 - NB_INVALID_CHAN_REQD_RECEIVED_BY_BSC (Section
22.4.2.2.2.4 )
MC963 NB_NON_PS_CHAN_REQD_DISCRADED_BECAUSE_CONGESTION
(Section 22.4.2.2.2.5 )
MC964 - NB_VALID_LOCATION_UPDATE_RECEIVED_BY_BSC (Section
22.4.2.2.2.6 )
601 / 1392
22.4.2.2
22.4.2.2.1 All
22.4.2.2.2
22.4.2.2.2.1 MC928a - NB_TCH_DROP_CAUSE_TOO_LOW_QUALITY_UL
Long Name
NB_TCH_DROP_CAUSE_TOO_LOW_QUALITY_UL
Definition
Trigger condition
Sub Domain 1
BSC
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
602 / 1392
NB_PS_CHAN_REQD
Definition
Trigger condition
This counter is incremented by one if: 1) the "RA (Random Access Reference)"
byte in the 48.058 CHANNEL REQUIRED message equals to the following
values: 011110xx, 01111x0x, 01111xx0 (one phase packet access); 01110xxx
(single block packet access), or; 2) EGPRS Request Reference optional IE is
included in the 48.058 CHANNEL REQUIRED message.
Sub Domain 1
BSC
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
603 / 1392
NB_DISCARDED_PS_CHAN_REQD_BECAUSE_GSL_CONGESTION
Definition
Trigger condition
Sub Domain 1
BSC
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
604 / 1392
NB_INVALID_CHAN_REQD_RECEIVED_BY_BSC
Definition
Trigger condition
Upon reception of a 48.058 CHANNEL REQUIRED message from the BTS, the
BSC checks firstly the content of message. If an error is found, the received
48.058 CHANNEL REQUIRED message is discarded by the BSC. The counter
MC962 is incremented by one each time the received 48.058 CHANNEL
REQUIRED message is discarded because one of the following errors have
been detected by the BSC: 1) The message syntax errors, for example (list
non-exclusive): 1a) the message length is incorrect: i.e., the EGPRS Request
Reference OIE is not present, but the length of message does not equal to "10";
or the EGPRS Request Reference OIE is present, but the length of message
does not equal to "13" (Note 1). 1b) the IE length is incorrect. 2) the Timeslot
Number received in the CHANNEL REQUIRED message does not equal to
0 or 2 (only timeslot 0 or 2 can be used as BCCH Timeslots). 3) The C-bits
(C5, C4, C3, C2 & C1) of Channel Number MIE is not equal to the coding
10001 "Uplink CCCH (RACH)". 4) In case where the GPRS service is allowed
(EN_GPRS = TRUE) and the GPRS service has already been activated in the
cell: the BSC checks the presence of EGPRS Request Reference optional
IE. If this OIE is not included, then the BSC checks the "RA (Random Access
Reference)" byte in the 48.058 CHANNEL REQUIRED message: if the bits 8,
7 and 6 of "RA (does not equal to one of the following values: 000, 100, 101,
110, 111 and "RA (Random Access Reference)" byte in the 48.058 CHANNEL
REQUIRED message does not equal to the following values: 011110xx,
01111x0x, 01111xx0 (one phase packet access); 01110xxx (single block packet
access), Note 2. 5) In case where the GPRS service is not allowed (EN_GPRS
= FALSE) or the GPRS service has not yet been activated in the cell: if the bits
8, 7 and 6 of "RA (Random Access Reference)" byte in the 48.058 CHANNEL
REQUIRED message does not equal to one of the following values: 000, 100,
101, 110, 111; or if EGPRS Request Reference optional IE is included in the
48.058 CHANNEL REQUIRED message. 6) The Access delay value is greater
than or equal to RACH_TA_FILTER. Note 1: the EGPRS Request Reference
IE is an optional (ALU proprietary) in the CHANNEL REQUIRED message. If
this optional IE is present, the length of CHANNEL REQUIRED message is 13
instead of 10. Note 2: if the EGPRS Request Reference OIE is included, the
BSC does not check the "RA (Random Access Reference)" byte in the 48.058
CHANNEL REQUIRED message.
Sub Domain 1
BSC
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
605 / 1392
NB_NON_PS_CHAN_REQD_DISCRADED_BECAUSE_CONGESTION
Definition
Trigger condition
Sub Domain 1
BSC
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
606 / 1392
NB_VALID_LOCATION_UPDATE_RECEIVED_BY_BSC
Definition
Trigger condition
Sub Domain 1
BSC
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
607 / 1392
22.4.3.2 Internal
22.4.3.2.1 All Internal
MC142e - NB_OUT_IDR_SUCC (Section 22.4.3.2.3.1 )
MC142f - NB_OUT_EDR_SUCC (Section 22.4.3.2.2.1 )
MC717a - NB_INC_IDR_SUCC_TRX (Section 22.4.3.2.3.2 )
22.4.3.2.2 Failure
22.4.3.2.2.1 MC142f - NB_OUT_EDR_SUCC
Long Name
NB_OUT_EDR_SUCC
Definition
MC142f=C142b+C142d
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
608 / 1392
22.4.3.2.3 Success
22.4.3.2.3.1 MC142e - NB_OUT_IDR_SUCC
Long Name
NB_OUT_IDR_SUCC
Definition
MC142e=C142a+C142c
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
609 / 1392
NB_INC_IDR_SUCC_TRX
Definition
Trigger condition
Sub Domain 1
Directed Retry
Sub Domain 2
Internal
Sub Domain 3
Success
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
610 / 1392
22.4.4.2 SDCCH
22.4.4.2.1 All SDCCH
MC137 - NB_SDCCH_DROP_EST_PHAS_BSS_PB (Section 22.4.4.2.2.1 )
MC138 - NB_SDCCH_DROP_EST_PHAS_RLF (Section 22.4.4.2.2.2 )
22.4.4.2.2 Failure
22.4.4.2.2.1 MC137 - NB_SDCCH_DROP_EST_PHAS_BSS_PB
Long Name
NB_SDCCH_DROP_EST_PHAS_BSS_PB
Definition
Trigger condition
Sub Domain 1
Established Phase
Sub Domain 2
SDCCH
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
611 / 1392
NB_SDCCH_DROP_EST_PHAS_RLF
Definition
Number of SDCCH drops on SDCCH established phase due to radio link failure
(radio link timeout or Lapdm timer expiry).
Trigger condition
Sub Domain 1
Established Phase
Sub Domain 2
SDCCH
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
612 / 1392
22.4.4.3 TCH
22.4.4.3.1 All TCH
MC14c - NB_TCH_DROP_EST_PHAS_BSS_PB (Section 22.4.4.3.2.1 )
MC162 - NB_TCH_DROP_DTAP_EST_PHAS (Section 22.4.4.3.2.2 )
MC736 - NB_TCH_DROP_EST_PHAS_RLF_TRX (Section 22.4.4.3.2.3 )
MC739 - NB_TCH_DROP_EST_PHAS_REM_TRANS_FAIL_TRX (Section
22.4.4.3.2.4 )
613 / 1392
22.4.4.3.2 Failure
22.4.4.3.2.1 MC14c - NB_TCH_DROP_EST_PHAS_BSS_PB
Long Name
NB_TCH_DROP_EST_PHAS_BSS_PB
Definition
Trigger condition
Sub Domain 1
Established Phase
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
614 / 1392
NB_TCH_DROP_DTAP_EST_PHAS
Definition
Trigger condition
Sub Domain 1
Established Phase
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
615 / 1392
NB_TCH_DROP_EST_PHAS_RLF_TRX
Definition
Trigger condition
Sub Domain 1
Established Phase
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
616 / 1392
NB_TCH_DROP_EST_PHAS_REM_TRANS_FAIL_TRX
Definition
Trigger condition
Sub Domain 1
Established Phase
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
617 / 1392
22.4.5 Handover
22.4.5.1 All Handover
MC03 - NB_OUT_SDCCH_HO_SUCC (Section 22.4.5.2.3.1 )
MC07 - NB_SDCCH_DROP_OUT_HO (Section 22.4.5.2.2.1 )
MC10 - NB_INC_SDCCH_HO_SUCC (Section 22.4.5.2.3.2 )
MC14a - NB_TCH_DROP_HO_PREP_EXEC_FAIL_BSS_PB (Section
22.4.5.3.2.1 )
MC621 - NB_TCH_DROP_OUT_HO_EXEC_TRX (Section 22.4.5.3.2.2 )
MC711 - NB_TCH_OUT_HO_PREP_FAIL_CONG_TRX (Section 22.4.5.3.2.3 )
MC712 - NB_TCH_OUT_HO_SUCC_TRX (Section 22.4.5.3.3.1 )
MC713 - NB_TCH_OUT_HO_FAIL_REV_TRX (Section 22.4.5.3.2.4 )
MC714 - NB_TCH_OUT_HO_FAIL_NO_REV_TRX (Section 22.4.5.3.2.5 )
MC717b - NB_INC_TCH_HO_SUCC_TRX (Section 22.4.5.3.3.2 )
22.4.5.2 SDCCH
22.4.5.2.1 All SDCCH
MC03 - NB_OUT_SDCCH_HO_SUCC (Section 22.4.5.2.3.1 )
MC07 - NB_SDCCH_DROP_OUT_HO (Section 22.4.5.2.2.1 )
MC10 - NB_INC_SDCCH_HO_SUCC (Section 22.4.5.2.3.2 )
22.4.5.2.2 Failure
22.4.5.2.2.1 MC07 - NB_SDCCH_DROP_OUT_HO
Long Name
NB_SDCCH_DROP_OUT_HO
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
SDCCH
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
618 / 1392
22.4.5.2.3 Success
22.4.5.2.3.1 MC03 - NB_OUT_SDCCH_HO_SUCC
Long Name
NB_OUT_SDCCH_HO_SUCC
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
SDCCH
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
619 / 1392
NB_INC_SDCCH_HO_SUCC
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
SDCCH
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
620 / 1392
22.4.5.3 TCH
22.4.5.3.1 All TCH
MC14a - NB_TCH_DROP_HO_PREP_EXEC_FAIL_BSS_PB (Section
22.4.5.3.2.1 )
MC621 - NB_TCH_DROP_OUT_HO_EXEC_TRX (Section 22.4.5.3.2.2 )
MC711 - NB_TCH_OUT_HO_PREP_FAIL_CONG_TRX (Section 22.4.5.3.2.3 )
MC712 - NB_TCH_OUT_HO_SUCC_TRX (Section 22.4.5.3.3.1 )
MC713 - NB_TCH_OUT_HO_FAIL_REV_TRX (Section 22.4.5.3.2.4 )
MC714 - NB_TCH_OUT_HO_FAIL_NO_REV_TRX (Section 22.4.5.3.2.5 )
MC717b - NB_INC_TCH_HO_SUCC_TRX (Section 22.4.5.3.3.2 )
22.4.5.3.2 Failure
22.4.5.3.2.1 MC14a - NB_TCH_DROP_HO_PREP_EXEC_FAIL_BSS_PB
Long Name
NB_TCH_DROP_HO_PREP_EXEC_FAIL_BSS_PB
Definition
Number of TCH (in HR or FR usage) drops due to BSS problem during any TCH
handover preparation and execution phases. This counter is incremented on the
cell on which the problem occurs(In the case of internal inter-cell handovers,
it is not incremented on both serving and target cell). For problems that are
not related to a specific cell, the counter related to the serving cell will be
incremented. It may happen that several causes of failures mentioned below
are detected consecutively. In that case, the counter will only be incremented
once, as soon as the handover procedure fails. This counter takes into account
handovers from TCH in traffic or in signaling mode.
621 / 1392
Trigger condition
1) Whenever the BSC receives on Abis interface from the target cell negative
acknowledgment to the TCH channel activation involved in the handover
procedure. 2) Whenever the timer supervising the Channel Activation procedure
(T9103) expires on the target cell during activation of a TCH channel involved in
the handover procedure. 3) Whenever an 48.058 ERROR REPORT message
with a cause value of "O&M intervention" is received on Abis interface from
either the serving or the target cell during the external or internal inter-cell
handover procedure and leads to a transaction failure. 4) Whenever an 48.058
ERROR REPORT message with a cause value of "O&M intervention" is
received on Abis interface on either the old or the new channel during the
internal intra-cell handover procedure and leads to a transaction failure. 5)
Whenever an 48.058 ERROR REPORT message on SAPI 0 with a cause value
of "message sequence error" is received on Abis interface from the serving
cell between the sending of the 48.058 CHANNEL ACTIVATION message and
the reception of the 48.058 CHANNEL ACTIVATION ACKNOWLEDGMENT
during the internal inter-cell TCH handover and leads to a transaction failure. 6)
Whenever an 48.058 ERROR REPORT message on SAPI 0 with a cause value
of "message sequence error" is received on Abis interface on the old channel
between the sending of the 48.058 CHANNEL ACTIVATION message and the
reception of the 48.058 CHANNEL ACTIVATION ACKNOWLEDGE during the
internal intra-cell TCH handover and leads to a transaction failure. 7) Whenever
a LAPD failure related to either serving or target cell is reported to the Layer 3
of the BSC (for an RSL supporting a TCH transaction for handover purpose)
and leads to a transaction failure. 8) Whenever an TCH handover abortion is
initiated by the BSS O&M FAULT MANAGEMENT application part or by the BSS
TELECOM application part as the result of a system defense action which may
be due to BSS equipment failures external to the BSC (e.g. RSL failure or CU
recovery failure), or due to BSC internal hardware problems (e.g. TCU failure
or DTC failure) or due to BSC internal software problems (e.g. inconsistencies
detected between software modules or lack of software resources (memory,
timer reference, file reference...) or communication problems between
different processor boards). 9) Whenever a 48.058 CONNECTION FAILURE
INDICATION message with a cause value of "remote transcoder failure" is
received on Abis interface from the old channel between the sending of the
48.058 CHANNEL ACTIVATION message and the reception of the 48.058
CHANNEL ACTIVATION ACKNOWLEDGE during an internal intra-cell or
inter-cellTCH handover procedure and leads to a transaction failure. Notes :
1. TCH handover failures which are due to O&M operator actions on BTS or
BSC should not be counted. Indeed, in case of numerous failures due to O&M
commands, this counter will overestimate failures which are due to problems
which are internal to the BSS. However, due to the current implementation which
does not allow to be aware of the origin of the failure, O&M operator actions will
also be counted. 2. It may happen that the counter can not be incremented
since it is implemented within the faulty entity.
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Overview measurements
622 / 1392
Type Definition
External Comment
623 / 1392
NB_TCH_DROP_OUT_HO_EXEC_TRX
Definition
Number of TCH drops during the execution of any TCH outgoing handover,
per TRX. This counter takes into account handovers from TCH in traffic or in
signaling mode. MC621 = C621
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
624 / 1392
NB_TCH_OUT_HO_PREP_FAIL_CONG_TRX
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
625 / 1392
NB_TCH_OUT_HO_FAIL_REV_TRX
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
626 / 1392
NB_TCH_OUT_HO_FAIL_NO_REV_TRX
Definition
Trigger condition
1) External TCH HO: Whenever the timer supervising the handover procedure on
the serving cell (T8) expires, except if a 48.008 CLEAR COMMAND with "normal
event/call control" cause was received from the MSC, leading to a normal call
release. In such a case, the handover is considered as successful. 2) Internal
intercell TCH HO: Whenever the timer supervising the handover procedure
(T3103) expires during an internal inter-cell TCH handover. 3) Intracell TCH HO:
Whenever the timer supervising the handover procedure (T3107) expires during
an internal intra-cell Note: This counter counts both inter-PLMN and intra-PLMN
handover events. Note: This counter counts hantover to UMTS
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Failure
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
627 / 1392
22.4.5.3.3 Success
22.4.5.3.3.1 MC712 - NB_TCH_OUT_HO_SUCC_TRX
Long Name
NB_TCH_OUT_HO_SUCC_TRX
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Success
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
628 / 1392
NB_INC_TCH_HO_SUCC_TRX
Definition
Trigger condition
Sub Domain 1
Handover
Sub Domain 2
TCH
Sub Domain 3
Success
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
629 / 1392
22.4.6 LCS
22.4.6.1 All LCS
MC923a - NB_LCS_REQ (Section 22.4.6.2.3.1 )
MC923b - NB_LCS_SUCC (Section 22.4.6.2.3.2 )
MC923c - NB_LCS_FAIL_LB (Section 22.4.6.2.2.1 )
MC923d - NB_LCS_ABORT (Section 22.4.6.2.2.2 )
22.4.6.2
22.4.6.2.1 All
22.4.6.2.2
22.4.6.2.2.1 MC923c - NB_LCS_FAIL_LB
Long Name
NB_LCS_FAIL_LB
Definition
Number of LCS requests rejected by the SMLC. The failed LCS requests
indicated by the SMLC to the BSC encompass the failure to determine
geographic location estimate and the failure of LCS assistance data delivery.
Trigger condition
Sub Domain 1
LCS
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
630 / 1392
NB_LCS_ABORT
Definition
Trigger condition
Sub Domain 1
LCS
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
631 / 1392
22.4.6.2.3 SCCP
22.4.6.2.3.1 MC923a - NB_LCS_REQ
Long Name
NB_LCS_REQ
Definition
Number of LCS requests received from the MSC in CS domain. The LCS
requests encompass the geographic location requests and the LCS assistance
data requests.
Trigger condition
Sub Domain 1
LCS
Sub Domain 2
Sub Domain 3
SCCP
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
632 / 1392
NB_LCS_SUCC
Definition
Trigger condition
Sub Domain 1
LCS
Sub Domain 2
Sub Domain 3
SCCP
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
633 / 1392
22.4.7.2.2 Failure
22.4.7.2.2.1 MC197 - NB_SMS_PP_CON_FAIL
Long Name
NB_SMS_PP_CON_FAIL
Definition
MC197=C194a+C194b+C194c+C195
Trigger condition
Sub Domain 1
Sub Domain 2
Point to Point
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
634 / 1392
22.4.7.2.3 Success
22.4.7.2.3.1 MC191 - NB_SMS_PP_CON_MT_SDCCH
Long Name
NB_SMS_PP_CON_MT_SDCCH
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Point to Point
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
635 / 1392
NB_SMS_PP_CON_SUCC
Definition
MC196=C190+C191+C192+C193
Trigger condition
Sub Domain 1
Sub Domain 2
Point to Point
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
636 / 1392
22.4.8 Speech
22.4.8.1 All Speech
MC170 - NB_CALL_TFO (Section 22.4.8.2.2.1 )
MC935 - NB_CALL_TFO_AMR_WB (Section 22.4.8.2.2.2 )
22.4.8.2 TFO
22.4.8.2.1 All TFO
MC170 - NB_CALL_TFO (Section 22.4.8.2.2.1 )
MC935 - NB_CALL_TFO_AMR_WB (Section 22.4.8.2.2.2 )
22.4.8.2.2
22.4.8.2.2.1 MC170 - NB_CALL_TFO
Long Name
NB_CALL_TFO
Definition
Number of TCHs assigned in the serving cell for which TFO has been
successfully established.
Trigger condition
For each assigned TCH, the counter is incremented the first time a 48.058 TFO
REPORT message is received by the BSC, indicating that TFO is established
(i.e. TFO = 1 in the TFO Status IE). Note 1: This counter shall be incremented
only once per assigned TCH (i.e. the first time it is received for the assigned
TCH). Note 2: A TCH is seen as assigned in the serving cell between the
sending of 48.058 CHANNEL ACTIVATION message and the receipt of the
48.058 RF CHANNEL RELEASE message. This means that the counter can
be incremented either if the TCH is assigned to serve a normal assignment or
if the TCH is assigned to serve an incoming internal (inter-cell or intra-cell) or
external handover. Note 3: MC170 = C170
Sub Domain 1
Speech
Sub Domain 2
TFO
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
637 / 1392
NB_CALL_TFO_AMR_WB
Definition
Number of TCH assigned using AMR-WB for which TFO has been successfully
established.
Trigger condition
For each assigned TCH, the counter is incremented the first time a 48.058 TFO
REPORT message is received by the BSC, indicating that TFO is established
(i.e. TFO = 1 in the TFO Status IE) and the used codec is an AMR WB one (i.e.
FR sv5). Note 1: This counter shall be incremented only once per assigned
TCH (i.e. the first time it is received for the assigned TCH). Note 2: A TCH is
seen as assigned in the serving cell between the sending of 48.058 CHANNEL
ACTIVATION message and the receipt of the 48.058 RF CHANNEL RELEASE
message. This means that the counter can be incremented either if the TCH is
assigned to serve a normal assignment or if the TCH is assigned to serve an
incoming internal (inter-cell or intra-cell) or external handover.
Sub Domain 1
Speech
Sub Domain 2
TFO
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
638 / 1392
22.4.9 TCH
22.4.9.1 All TCH
MC928b - NB_TCH_DROP_CAUSE_TOO_LOW_LEVEL_UL (Section
22.4.9.2.2.1 )
MC928c - NB_TCH_DROP_CAUSE_TOO_LOW_QUALITY_DL (Section
22.4.9.2.2.2 )
MC928d - NB_TCH_DROP_CAUSE_TOO_LOW_LEVEL_DL (Section
22.4.9.2.2.3 )
MC928e - NB_TCH_DROP_CAUSE_TOO_LONG_MS_BS_DISTANCE
(Section 22.4.9.2.2.4 )
MC928f - NB_TCH_DROP_CAUSE_TOO_SHORT_MS_BS_DISTANCE
(Section 22.4.9.2.2.5 )
MC928g - NB_TCH_DROP_CAUSE_TOO_HIGH_INTERFERENCE_UPLINK
(Section 22.4.9.2.2.6 )
MC928h NB_TCH_DROP_CAUSE_TOO_HIGH_INTERFERENCE_DOWNLINK
(Section 22.4.9.2.2.7 )
MC928i - NB_TCH_DROP_OTHER_CAUSES (Section 22.4.9.2.2.8 )
639 / 1392
22.4.9.2
22.4.9.2.1 All
22.4.9.2.2
22.4.9.2.2.1 MC928b - NB_TCH_DROP_CAUSE_TOO_LOW_LEVEL_UL
Long Name
NB_TCH_DROP_CAUSE_TOO_LOW_LEVEL_UL
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
640 / 1392
NB_TCH_DROP_CAUSE_TOO_LOW_QUALITY_DL
Definition
Number of TCH drops due to Cause 4 (Too low quality on the downlink).
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
641 / 1392
NB_TCH_DROP_CAUSE_TOO_LOW_LEVEL_DL
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
642 / 1392
NB_TCH_DROP_CAUSE_TOO_LONG_MS_BS_DISTANCE
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
643 / 1392
NB_TCH_DROP_CAUSE_TOO_SHORT_MS_BS_DISTANCE
Definition
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
644 / 1392
NB_TCH_DROP_CAUSE_TOO_HIGH_INTERFERENCE_UPLINK
Definition
Number of TCH drops due to Cause 15 (Too high interference level on the
uplink).
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
645 / 1392
NB_TCH_DROP_CAUSE_TOO_HIGH_INTERFERENCE_DOWNLINK
Definition
Number of TCH drops due to Cause 16 (Too high interference level on the
downlink).
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
646 / 1392
NB_TCH_DROP_OTHER_CAUSES
Definition
Number of TCH drops due to other causes than Cause 2 (Too low quality in UL),
Cause 3 (Too low level in UL), Cause 4 (Too low quality on the downlink), Cause
5 (Too low level in DL), Cause 6 (Too long MS-BS distance), Cause 15 (Too high
interference level on the uplink), Cause 16 (Too high interference level on the
downlink), Cause 22 (Too short MS-BS distance).
Trigger condition
Sub Domain 1
TCH
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
647 / 1392
648 / 1392
22.4.10.2
22.4.10.2.1 All
22.4.10.2.2
22.4.10.2.2.1 MC901 - NB_Suspend_Resume_req
Long Name
NB_Suspend_Resume_req
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
649 / 1392
Nb_Suspend_fail
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
650 / 1392
Nb_Suspend_succ
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
651 / 1392
22.4.10.2.3 Failure
22.4.10.2.3.1 MC612c - NB_TCH_NOR_ASS_PREP_FAIL_T11_EXP
Long Name
NB_TCH_NOR_ASS_PREP_FAIL_T11_EXP
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
652 / 1392
22.4.10.3.2 Success
22.4.10.3.2.1 MC161 - NB_DTAP_NOR_ASS_SUCC
Long Name
NB_DTAP_NOR_ASS_SUCC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
DTAP Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
653 / 1392
22.4.10.4.2 Failure
22.4.10.4.2.1 MC04 - NB_IMM_ASS_PREP_FAIL_CONG
Long Name
NB_IMM_ASS_PREP_FAIL_CONG
Definition
Trigger condition
All SDCCH sub-channels in the required cell were either Busy or Out of Service,
when the 48.058 CHANNEL REQUIRED message was received.
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
654 / 1392
NB_IMM_ASS_EXEC_FAIL_RADIO
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
655 / 1392
22.4.10.4.3 Success
22.4.10.4.3.1 MC01 - NB_IMM_ASS_SUCC_MT
Long Name
NB_IMM_ASS_SUCC_MT
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
656 / 1392
NB_IMM_ASS_SUCC_MO
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
657 / 1392
NB_IMM_ASS_SUCC_MO_LOC_UPD
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
658 / 1392
NB_IMM_ASS_SUCC_MO_SMS
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
659 / 1392
NB_IMM_ASS_SUCC_MO_SUP_SERV
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
660 / 1392
NB_IMM_ASS_SUCC_MO_FOLLOW_ON
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
661 / 1392
NB_IMM_ASS_SUCC_MO_CM_REEST
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
662 / 1392
NB_IMM_ASS_SUCC_MO_L3INFO_UNKNOW
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
663 / 1392
NB_IMM_ASS_SUCC_MO_IMSI_DETACH
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
664 / 1392
NB_IMM_ASS_SUCC_MO_CALL_EST
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
665 / 1392
NB_IMM_ASS_SUCC_MO_LCS
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Success
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
666 / 1392
667 / 1392
22.4.10.5.2
22.4.10.5.2.1 MC140a - NB_TCH_NOR_ASS_REQ
Long Name
NB_TCH_NOR_ASS_REQ
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
668 / 1392
NB_TCH_NOR_ASS_ATPT
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
669 / 1392
NB_TCH_NOR_ASS_HO_REQ_ABLE_TO_PREEMPT
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
670 / 1392
NB_PREEMPT_CAP_ALLOC_SUCC
Definition
Number of preemption capable calls served with resources in the cell (with or
without using the preemption feature).
Trigger condition
Whenever the BSC has selected a channel to activate a TCH channel related
to either 48.008 ASIGNMENT REQUEST, 48.008 VGCS/VBS ASSIGNMENT
REQUEST, 48.008 HANDOVER REQUEST, 48.008 ESTABLISH INDICATION
with the L3_INFORMATION field including a 44.018 NOTIFICATION
RESPONSE message and the call has the ability to pre-empt another call with
lower priority (i.e. pci = 1).
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
671 / 1392
NB_PREEMPTED_CALLS
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
672 / 1392
NB_PREEMPT_CAP_OUT_DR_ALLOC_SUCC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
673 / 1392
NB_TCH_NOR_ASS_HO_SUCC_PREEMPTABLE
Definition
Number of TCH Normal Assignment- and incoming (internal and external) TCH
Handover/Directed Retry Successes indicating the facility of being preempt-able
by a call with a higher priority.
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
674 / 1392
NB_TCH_NOR_ASS_PREP_FAIL_PMIS
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
675 / 1392
22.4.10.5.3 Failure
22.4.10.5.3.1 MC19 - NB_TCH_NOR_ASS_HO_PREP_FAIL_ACHAN_MIS (110)
Long Name
NB_TCH_NOR_ASS_HO_PREP_FAIL_ACHAN_MIS (110)
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Failure
Measured Object
BSC
Type Name
Overview measurements
Type Definition
External Comment
676 / 1392
NB_TCH_NOR_ASS_PREP_FAIL_NO_QUEUE
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
677 / 1392
NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_FULL
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
678 / 1392
NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_REJ
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
679 / 1392
NB_TCH_NOR_ASS_EXEC_FAIL_RADIO_TRX
Definition
Trigger condition
1) The timer T3107 in the BSS supervising the TCH channel seizure by the
mobile expires (following the sending of 44.018 ASSIGNMENT COMMAND for a
TCH channel that is not involved in a handover procedure). 2) The timer T3107
in the BSS supervising the TCH channel seizure by the mobile expires, following
the sending of 44.018 DTM ASSIGNMENT COMMAND for a TCH channel in
signaling mode. 3) The BSC receives a 44.018 ASSIGNMENT FAILURE on
the old (SDCCH) channel during the normal assignment procedure except in
case of multiband cell, when the normal assignment procedure is performed
in the inner zone and the ASSIGNMENT FAILURE is received with the cause
"protocol error unspecified". 4) The BSC receives a 44.018 DTM ASSIGNMENT
FAILURE on the old (SDCCH) channel during the DTM assignment procedure,
for a TCH in signaling mode.
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Failure
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
680 / 1392
NB_TCH_NOR_ASS_PREP_FAIL_CONG_R_ABIS
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Failure
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
681 / 1392
22.4.10.5.4 Success
22.4.10.5.4.1 MC718 - NB_TCH_NOR_ASS_SUCC_TRX
Long Name
NB_TCH_NOR_ASS_SUCC_TRX
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Success
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
682 / 1392
683 / 1392
22.5.2 Channel
22.5.2.1 All Channel
MC141 - AV_NB_TCH_QUEUED (Section 22.5.2.5.3.1 )
MC24 - AV_NB_NOT_AVAIL_TRX_TS (Section 22.5.2.6.2.1 )
MC250 - AV_NB_AVAIL_TCH (Section 22.5.2.5.2.1 )
MC26 - AV_NB_AVAIL_SDCCH (Section 22.5.2.4.3.1 )
MC27 - AV_NB_AVAIL_CCCH (Section 22.5.2.3.2.1 )
MC28a - AV_NB_BUSY_CS_TS (Section 22.5.2.5.3.2 )
MC29a - NB_MAX_SIMUL_BUSY_CS_TS (Section 22.5.2.5.3.3 )
MC31 - NB_MAX_SIMUL_BUSY_SDCCH (Section 22.5.2.4.4.1 )
MC320a - AV_NB_IDLE_TCH_INTERF_BAND1 (Section 22.5.2.5.3.4 )
MC320b - AV_NB_IDLE_TCH_INTERF_BAND2 (Section 22.5.2.5.3.5 )
MC320c - AV_NB_IDLE_TCH_INTERF_BAND3 (Section 22.5.2.5.3.6 )
MC320d - AV_NB_IDLE_TCH_INTERF_BAND4 (Section 22.5.2.5.3.7 )
MC320e - AV_NB_IDLE_TCH_INTERF_BAND5 (Section 22.5.2.5.3.8 )
MC34 - TIME_ALL_AVAIL_TRX_TS_BUSY (Section 22.5.2.6.3.1 )
MC35 - AV_NB_A_TRAF_CHAN_BLOCK_OUT_OF_SERV (Section
22.5.2.2.2.1 )
MC36 - AV_NB_AVAIL_A_TRAF_CHAN (Section 22.5.2.2.2.2 )
MC370a - NB_TRX_FR_ALLOC (Section 22.5.2.5.3.9 )
MC370b - NB_TRX_HR_ALLOC (Section 22.5.2.5.3.10 )
MC390 - NB_TIMES_SDCCH_BUSY (110) (Section 22.5.2.4.4.2 )
MC800 - AV_NB_AVAIL_DYN_TS (Section 22.5.2.4.3.2 )
684 / 1392
22.5.2.2 A channel
22.5.2.2.1 All A channel
MC35 - AV_NB_A_TRAF_CHAN_BLOCK_OUT_OF_SERV (Section
22.5.2.2.2.1 )
MC36 - AV_NB_AVAIL_A_TRAF_CHAN (Section 22.5.2.2.2.2 )
22.5.2.2.2 Availability
22.5.2.2.2.1 MC35 - AV_NB_A_TRAF_CHAN_BLOCK_OUT_OF_SERV
Long Name
AV_NB_A_TRAF_CHAN_BLOCK_OUT_OF_SERV
Definition
Average number of A-traffic-channels (i.e. all A-channels except for N7, SPC
and synchro) that are blocked or out of service.
Trigger condition
Every 20 seconds, the TTCHs that satisfy one of the following conditions are
counted : a) Maintenance state is either IN TRAFFIC or FAULTY IN TRAFFIC or
WAIT TRAFFIC CLEAR and Telephonic state is blocked b) Maintenance state
is either OPERATOR OUT OF SERVICE or FAULTY OUT OF SERVICE Note:
This counter is not incremented if the channel is in the Maintenance state NOT
EQUIPPED, or if the channel is in use for signalling (N7), for a semi-permanent
connection (SPC), or for synchronisation (channel 0).
Sub Domain 1
Channel
Sub Domain 2
A channel
Sub Domain 3
Availability
Measured Object
BSC
Type Name
Overview measurements
Type Definition
External Comment
685 / 1392
AV_NB_AVAIL_A_TRAF_CHAN
Definition
Trigger condition
Every 20 seconds, the TTCHs that satisfay one of the following conditions are
counted : Maintenance state is either IN TRAFFIC or FAULTY IN TRAFFIC
or WAIT TRAFFIC CLEAR and Telephonic state is available free or available
busy. Note: This counter is not incremented if the channel is in the Maintenance
state NOT EQUIPPED, or if the channel is in use for signalling (N7), for a
semi-permanent connection (SPC), or for synchronisation (channel 0).
Sub Domain 1
Channel
Sub Domain 2
A channel
Sub Domain 3
Availability
Measured Object
BSC
Type Name
Overview measurements
Type Definition
External Comment
686 / 1392
22.5.2.3 CCCH
22.5.2.3.1 All CCCH
MC27 - AV_NB_AVAIL_CCCH (Section 22.5.2.3.2.1 )
22.5.2.3.2 Availability
22.5.2.3.2.1 MC27 - AV_NB_AVAIL_CCCH
Long Name
AV_NB_AVAIL_CCCH
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
CCCH
Sub Domain 3
Availability
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
687 / 1392
22.5.2.4 SDCCH
22.5.2.4.1 All SDCCH
MC26 - AV_NB_AVAIL_SDCCH (Section 22.5.2.4.3.1 )
MC31 - NB_MAX_SIMUL_BUSY_SDCCH (Section 22.5.2.4.4.1 )
MC390 - NB_TIMES_SDCCH_BUSY (110) (Section 22.5.2.4.4.2 )
MC800 - AV_NB_AVAIL_DYN_TS (Section 22.5.2.4.3.2 )
MC802a - AV_NB_BUSY_DYN_SDCCH (Section 22.5.2.4.4.3 )
MC802b - MAX_NB_BUSY_DYN_SDCCH (Section 22.5.2.4.4.4 )
MC803 - TIME_SDCCH_CONGESTION (Section 22.5.2.4.2.1 )
22.5.2.4.2
22.5.2.4.2.1 MC803 - TIME_SDCCH_CONGESTION
Long Name
TIME_SDCCH_CONGESTION
Definition
Cumulated time (in seconds) during which the SDCCH request(s) are not served
because no SDCCH sub-channel is available.
Trigger condition
The time counter is started whenever a SDCCH request cannot be served. The
time counter is stopped whenever one of the following conditions is checked: - if
a SDCCH sub-channel becomes free and usable on a static SDCCH timeslot
or on a dynamic timeslot allocated as SDCCH (i.e. when the timeslot is known
from the SDCCH_RM module). The term "usable" means here that the SDCCH
sub-channel is not mapped on a TCU in a very high overload state, or, - if a
SDCCH request is served successfully. This condition corresponds to the case
the SDCCH_RM module requests the TCH_RM module for a dynamic SDCCH
timeslot.
Sub Domain 1
Channel
Sub Domain 2
SDCCH
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
688 / 1392
22.5.2.4.3 Availability
22.5.2.4.3.1 MC26 - AV_NB_AVAIL_SDCCH
Long Name
AV_NB_AVAIL_SDCCH
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
SDCCH
Sub Domain 3
Availability
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
689 / 1392
AV_NB_AVAIL_DYN_TS
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
SDCCH
Sub Domain 3
Availability
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
690 / 1392
22.5.2.4.4 Usage
22.5.2.4.4.1 MC31 - NB_MAX_SIMUL_BUSY_SDCCH
Long Name
NB_MAX_SIMUL_BUSY_SDCCH
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
SDCCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
691 / 1392
NB_TIMES_SDCCH_BUSY (110)
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
SDCCH
Sub Domain 3
Usage
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
692 / 1392
AV_NB_BUSY_DYN_SDCCH
Definition
Trigger condition
The BSC takes periodically a sample of the number of busy dynamic SDCCH
sub-channels. The sampling period is set to the value indicated in the Status
Inspection field. At the expiry of the accumulation period, all samples are
averaged (i.e. summed and divided by the number of samples). The averaged
value is rounded up or down to the nearest value with an accuracy of 0.1.
A dynamic SDCCH sub-channel is considered as busy during the time it is
allocated to a given MS for SDCCH traffic. Note that the counter value that is
indicated in the ASCII file (which can be obtained via the OBSYNT interface)
is an integer value (i.e. it is as if the BSC multiplies by 10 the average). The
reported value shall then be divided by 10 afterwards so that the value that is
displayed to the end-user is the correct one
Sub Domain 1
Channel
Sub Domain 2
SDCCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
693 / 1392
MAX_NB_BUSY_DYN_SDCCH
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
SDCCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
694 / 1392
22.5.2.5 TCH
22.5.2.5.1 All TCH
MC141 - AV_NB_TCH_QUEUED (Section 22.5.2.5.3.1 )
MC250 - AV_NB_AVAIL_TCH (Section 22.5.2.5.2.1 )
MC28a - AV_NB_BUSY_CS_TS (Section 22.5.2.5.3.2 )
MC29a - NB_MAX_SIMUL_BUSY_CS_TS (Section 22.5.2.5.3.3 )
MC320a - AV_NB_IDLE_TCH_INTERF_BAND1 (Section 22.5.2.5.3.4 )
MC320b - AV_NB_IDLE_TCH_INTERF_BAND2 (Section 22.5.2.5.3.5 )
MC320c - AV_NB_IDLE_TCH_INTERF_BAND3 (Section 22.5.2.5.3.6 )
MC320d - AV_NB_IDLE_TCH_INTERF_BAND4 (Section 22.5.2.5.3.7 )
MC320e - AV_NB_IDLE_TCH_INTERF_BAND5 (Section 22.5.2.5.3.8 )
MC370a - NB_TRX_FR_ALLOC (Section 22.5.2.5.3.9 )
MC370b - NB_TRX_HR_ALLOC (Section 22.5.2.5.3.10 )
MC801a - AV_NB_BUSY_DYN_TCH (Section 22.5.2.5.3.11 )
MC801b - MAX_NB_BUSY_DYN_TCH (Section 22.5.2.5.3.12 )
22.5.2.5.2 Availability
22.5.2.5.2.1 MC250 - AV_NB_AVAIL_TCH
Long Name
AV_NB_AVAIL_TCH
Definition
Average number of available TCH/PDCH timeslots for traffic usage (i.e. TCH (for
HR or FR usage) or PDCH).
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Availability
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
695 / 1392
22.5.2.5.3 Usage
22.5.2.5.3.1 MC141 - AV_NB_TCH_QUEUED
Long Name
AV_NB_TCH_QUEUED
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
696 / 1392
AV_NB_BUSY_CS_TS
Definition
Trigger condition
The BSC takes periodically a sample of the number of busy TCH radio timeslots
and busy dynamic SDCCH/8 radio timeslots allocated as TCH. The sampling
period is set to the value indicated in the Status Inspection field. At the expiry of
the accumulation period, all samples are averaged (i.e. summed and divided
by the number of samples). The averaged value is rounded up or down to the
nearest value with an accuracy of 0.1. A TCH radio timeslot is considered as
busy during the time it is allocated to a given MS for TCH traffic (in HR or FR
usage). A dynamic SDCCH/8 timeslot allocated as TCH is considered as busy
during the time it is allocated to a given MS for TCH traffic. Note 1: the counter
value that is indicated in the ASCII file (which can be obtained via the OBSYNT
interface) is an integer value (i.e. it is as if the BSC multiplies by 10 the average).
The reported value shall then be divided by 10 afterwards so that the value that
is displayed to the end-user is the correct one. Note 2: This counter does not
take into account the PDCH radio timeslots allocated to the MFS.
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
697 / 1392
NB_MAX_SIMUL_BUSY_CS_TS
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
698 / 1392
AV_NB_IDLE_TCH_INTERF_BAND1
Definition
Average number of free TCH and free dynamic SDCCH/8 radio timeslots
belonging to the interference band 1. This number is updated upon the receipt
of 48.058 RF RESOURCE INDICATION.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
699 / 1392
AV_NB_IDLE_TCH_INTERF_BAND2
Definition
Average number of free TCH and free dynamic SDCCH/8 radio timeslots
belonging to the interference band 2. This number is updated upon the receipt
of 48.058 RF RESOURCE INDICATION.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
700 / 1392
AV_NB_IDLE_TCH_INTERF_BAND3
Definition
Average number of free TCH and free dynamic SDCCH/8 radio timeslots
belonging to the interference band 3. This number is updated upon the receipt
of 48.058 RF RESOURCE INDICATION.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
701 / 1392
AV_NB_IDLE_TCH_INTERF_BAND4
Definition
Average number of free TCH and free dynamic SDCCH/8 radio timeslots in FR
or HR usage belonging to the interference band 4. This number is updated upon
the receipt of 48.058 RF RESOURCE INDICATION.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
702 / 1392
AV_NB_IDLE_TCH_INTERF_BAND5
Definition
Average number of free TCH and free dynamic SDCCH/8 radio timeslots
belonging to the interference band 5. This number is updated upon the receipt
of 48.058 RF RESOURCE INDICATION.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
703 / 1392
NB_TRX_FR_ALLOC
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
704 / 1392
NB_TRX_HR_ALLOC
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
705 / 1392
AV_NB_BUSY_DYN_TCH
Definition
Trigger condition
The BSC takes periodically a sample of the number of busy dynamic SDCCH/8
timeslots allocated as TCH. The sampling period is set to the value indicated in
the Status Inspection field. At the expiry of the accumulation period, all samples
are averaged (i.e. summed and divided by the number of samples). The
averaged value is rounded up or down to the nearest value with an accuracy
of 0.1. A dynamic SDCCH/8 timeslot is considered as busy and allocated as
TCH during the time it is allocated to a given MS for TCH traffic (in FR or HR
usage). Note that the counter value that is indicated in the ASCII file (which can
be obtained via the OBSYNT interface) is an integer value (i.e. it is as if the BSC
multiplies by 10 the average). The reported value shall then be divided by 10
afterwards so that the value that is displayed to the end-user is the correct one
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
706 / 1392
MAX_NB_BUSY_DYN_TCH
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
707 / 1392
22.5.2.6 TRX_TS
22.5.2.6.1 All TRX_TS
MC24 - AV_NB_NOT_AVAIL_TRX_TS (Section 22.5.2.6.2.1 )
MC34 - TIME_ALL_AVAIL_TRX_TS_BUSY (Section 22.5.2.6.3.1 )
22.5.2.6.2 Availability
22.5.2.6.2.1 MC24 - AV_NB_NOT_AVAIL_TRX_TS
Long Name
AV_NB_NOT_AVAIL_TRX_TS
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TRX_TS
Sub Domain 3
Availability
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
708 / 1392
22.5.2.6.3 Usage
22.5.2.6.3.1 MC34 - TIME_ALL_AVAIL_TRX_TS_BUSY
Long Name
TIME_ALL_AVAIL_TRX_TS_BUSY
Definition
Cumulated time (in seconds) during which there is no free FR TCH sub-channel
to serve an incoming FR TCH request. A TCH sub-channel is seen as busy: i)
if the TCH sub-channel is occupied by a HR or FR CS call (in particular if it is
occupied by the CS part of a DTM call), or ii) if the TCH sub-channel is allocated
to the MFS to carry PS traffic.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TRX_TS
Sub Domain 3
Usage
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
709 / 1392
22.5.3 Interface
22.5.3.1 All Interface
MN1.1 - TIME_N7_ALIGNED (Section 22.5.3.2.2.1 )
22.5.3.2 A
22.5.3.2.1 All A
MN1.1 - TIME_N7_ALIGNED (Section 22.5.3.2.2.1 )
22.5.3.2.2 Availability
22.5.3.2.2.1 MN1.1 - TIME_N7_ALIGNED
Long Name
TIME_N7_ALIGNED
Definition
Trigger condition
Whenever the No.7 Signalling channel between the MSC and BSS is correctly
aligned, this counter will be incremented every second.
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
Availability
Measured Object
N7 Signalling Link
Type Name
Overview measurements
Type Definition
External Comment
710 / 1392
711 / 1392
22.5.4.2
22.5.4.2.1 All
22.5.4.2.2
22.5.4.2.2.1 MC922h - TIME_3G_HOReject_HL
Long Name
TIME_3G_HOReject_HL
Definition
Cumulative time (in seconds) during which the Cell is in 3G high load state.
Trigger condition
Sub Domain 1
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
712 / 1392
22.5.4.3.2
22.5.4.3.2.1 MC927a - NB_DTM_UL_TCH_ASS_ATPT
Long Name
NB_DTM_UL_TCH_ASS_ATPT
Definition
Trigger condition
Whenever the BSC sends (through the BTS) 44.018 DTM ASSIGNMENT
COMMAND message that includes the "Description of the Uplink Packet
Channel Assignment" optional IE.
Sub Domain 1
Sub Domain 2
DTM Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
713 / 1392
NB_DTM_DL_TCH_ASS_ATPT
Definition
Trigger condition
Whenever the BSC sends (through the BTS) 44.018 DTM ASSIGNMENT
COMMAND message that includes the "Description of the Downlink Packet
Channel Assignment" optional IE.
Sub Domain 1
Sub Domain 2
DTM Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
714 / 1392
NB_DTM_UL_PACKET_ASS_ATPT
Definition
Trigger condition
Whenever the BSC sends (through the BTS) 44.018 PACKET ASSIGNMENT
message that includes the "Description of the Uplink Packet Channel
Assignment" optional IE.
Sub Domain 1
Sub Domain 2
DTM Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
715 / 1392
NB_DTM_DL_PACKET_ASS_ATPT
Definition
Trigger condition
Whenever the BSC sends (through the BTS) 44.018 PACKET ASSIGNMENT
message that includes the "Description of the Downlink Packet Channel
Assignment" optional IE.
Sub Domain 1
Sub Domain 2
DTM Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
716 / 1392
NB_DTM_UL_TCH_ASS_EXEC_FAIL_RADIO
Definition
Number of UL TBF establishment in DTM with reallocation of the TCH execution failures due to MS access problem.
Trigger condition
1) Whenever the BSC receives from the BTS a DATA INDICATION (DTM
ASSIGNMENT FAILURE) message after having sent (through the BTS) 44.018
DTM ASSIGNMENT COMMAND message that includes the "Description of the
Uplink Packet Channel Assignment" optional IE. 2) After having sent (through
the BTS) 44.018 DTM ASSIGNMENT COMMAND message that includes the
"Description of the Uplink Packet Channel Assignment" optional IE, upon T3107
expiry, the BSC does not receive neither DTM ASSIGNMENT FAILURE (on the
old channel) nor ASSIGNMENT COMPLETE (on the new channel) messages.
Sub Domain 1
Sub Domain 2
DTM Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
717 / 1392
NB_DTM_DL_TCH_ASS_EXEC_FAIL_RADIO
Definition
Number of DL TBF establishment in DTM with reallocation of the TCH execution failures due to MS access problem.
Trigger condition
1) Whenever the BSC receives from the BTS a DATA INDICATION (DTM
ASSIGNMENT FAILURE) message after having sent (through the BTS) 44.018
DTM ASSIGNMENT COMMAND message that includes the "Description of the
Downlink Packet Channel Assignment" optional IE. 2) After having sent (through
the BTS) 44.018 DTM ASSIGNMENT COMMAND message that includes the
"Description of the Downlink Packet Channel Assignment" optional IE, upon
T3107 expiry, the BSC does not receive neither DTM ASSIGNMENT FAILURE
(on the old channel) nor ASSIGNMENT COMPLETE (on the new channel)
messages.
Sub Domain 1
Sub Domain 2
DTM Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
718 / 1392
22.5.4.4 E-GSM
22.5.4.4.1 All E-GSM
MC706 - NB_EGSM_MS_ACCESS_EXCEPT_LU (Section 22.5.4.4.2.1 )
22.5.4.4.2
22.5.4.4.2.1 MC706 - NB_EGSM_MS_ACCESS_EXCEPT_LU
Long Name
NB_EGSM_MS_ACCESS_EXCEPT_LU
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
E-GSM
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
719 / 1392
22.5.4.5 Service
22.5.4.5.1 All Service
MC701a - NB_TCH_FR_REQ (Section 22.5.4.5.2.1 )
MC701b - NB_TCH_DR_REQ (Section 22.5.4.5.2.2 )
MC701c - NB_TCH_DR_EFR_REQ (Section 22.5.4.5.2.3 )
MC701d - NB_TCH_AMR_REQ (Section 22.5.4.5.2.4 )
MC701e - NB_TCH_DATA_REQ (Section 22.5.4.5.2.5 )
MC701f - NB_TCH_FR_EFR_REQ (Section 22.5.4.5.2.6 )
MC701g - NB_TCH_NO_FR_REQ (Section 22.5.4.5.2.7 )
MC702a - NB_TCH_NOR_FR_ALLOC (Section 22.5.4.5.2.8 )
MC702b - NB_TCH_NOR_HR_ALLOC (Section 22.5.4.5.2.9 )
MC702c - NB_TCH_NOR_EFR_ALLOC (Section 22.5.4.5.2.10 )
MC704a - NB_TCH_NOR_AMR_FR_ALLOC (Section 22.5.4.5.2.11 )
MC704b - NB_TCH_NOR_AMR_HR_ALLOC (Section 22.5.4.5.2.12 )
MC705 - NB_TCH_NOR_DATA_ALLOC (Section 22.5.4.5.2.13 )
MC931 - NB_TCH_NOR_AMR_WB_GMSK_FR_ALLOC (Section 22.5.4.5.2.14
)
MC932 - NB_TCH_AMR_WB_GMSK_REQ (Section 22.5.4.5.2.15 )
22.5.4.5.2
22.5.4.5.2.1 MC701a - NB_TCH_FR_REQ
Long Name
NB_TCH_FR_REQ
Definition
Trigger condition
Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for speech call with
only GSM speech coding algorithm version 1 full rate allowed.
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
720 / 1392
NB_TCH_DR_REQ
Definition
Trigger condition
Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for speech call with
only GSM speech coding algorithm version 1 full rate and GSM speech coding
algorithm version 1 half rate allowed.
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
721 / 1392
NB_TCH_DR_EFR_REQ
Definition
Trigger condition
Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for speech call with
GSM speech coding algorithm version 1 full rate, GSM speech coding algorithm
version 1 half rate and GSM speech coding algorithm version 2 full rate allowed.
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
722 / 1392
NB_TCH_AMR_REQ
Definition
Trigger condition
Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for speech call with
GSM speech coding algorithm version 3 full rate or half rate allowed.
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
723 / 1392
NB_TCH_DATA_REQ
Definition
Trigger condition
Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for data call.
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
724 / 1392
NB_TCH_FR_EFR_REQ
Definition
Trigger condition
Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for speech call with
only GSM speech coding algorithm version 1 full rate and GSM speech coding
algorithm version 2 full rate allowed.
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
725 / 1392
NB_TCH_NO_FR_REQ
Definition
Trigger condition
Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for speech call with:
- only GSM speech coding algorithm version 1 half rate allowed - only GSM
speech coding algorithm version 1 half rate and version 2 full rate allowed - only
GSM speech coding algorithm version 2 full rate allowed
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
1) From 3GPP point of view, HR only, EFR&HR only, EFR only are not allowed,
as support of FR is mandatory. They are however counted for completion 2) MS
supporting AMR and not FR are taken into account in MC701d (although such
configuration is also forbidden by 3GPP).
726 / 1392
NB_TCH_NOR_FR_ALLOC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
727 / 1392
NB_TCH_NOR_HR_ALLOC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
728 / 1392
NB_TCH_NOR_EFR_ALLOC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
729 / 1392
NB_TCH_NOR_AMR_FR_ALLOC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
730 / 1392
NB_TCH_NOR_AMR_HR_ALLOC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
731 / 1392
NB_TCH_NOR_DATA_ALLOC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
732 / 1392
NB_TCH_NOR_AMR_WB_GMSK_FR_ALLOC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
733 / 1392
NB_TCH_AMR_WB_GMSK_REQ
Definition
Trigger condition
Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for speech call with
GSM speech coding algorithm version 5 full rate allowed.
Sub Domain 1
Sub Domain 2
Service
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
734 / 1392
735 / 1392
22.6.2 BSC
22.6.2.1 All BSC
MC926 - TCH_BLOCKING_OCCURENCES_BSC (Section 22.6.2.2.2.1 )
22.6.2.2
22.6.2.2.1 All
22.6.2.2.2
22.6.2.2.2.1 MC926 - TCH_BLOCKING_OCCURENCES_BSC
Long Name
TCH_BLOCKING_OCCURENCES_BSC
Definition
Trigger condition
Sub Domain 1
BSC
Sub Domain 2
Sub Domain 3
Measured Object
BSC
Type Name
Overview measurements
Type Definition
External Comment
736 / 1392
22.6.3 Channel
22.6.3.1 All Channel
MC380a - TIME_TRX_FR_BUSY (Section 22.6.3.5.2.1 )
MC380b - TIME_TRX_HR_BUSY (Section 22.6.3.5.2.2 )
MC380c - TIME_TRX_GSM_FR_BUSY (Section 22.6.3.5.2.3 )
MC380d - TIME_TRX_GSM_HR_BUSY (Section 22.6.3.5.2.4 )
MC380e - TIME_TRX_DCS_FR_BUSY (Section 22.6.3.5.2.5 )
MC380f - TIME_TRX_DCS_HR_BUSY (Section 22.6.3.5.2.6 )
MC381 - TIME_TRX_TCH_BUSY_BY_MULTIBAND_MS (Section 22.6.3.5.2.7 )
MC400 - TIME_TRX_SDCCH_BUSY (Section 22.6.3.4.2.1 )
MC804a - NB_UL_SINGLE_BLOCK_SIG_RACH (Section 22.6.3.3.2.1 )
MC804b - NB_UL_ONE_PHASE_SIG_RACH (Section 22.6.3.3.2.2 )
MC805a - NB_CHANNEL_ASSIGN_DL_AGCH (Section 22.6.3.3.2.3 )
MC805b - NB_CHANNEL_ASSIGN_DL_PCH (Section 22.6.3.3.2.4 )
MC8a - NB_CELL_PAGING_CMD (Section 22.6.3.3.2.5 )
MC8b - NB_CELL_IMM_ASS_CMD (Section 22.6.3.3.2.6 )
MC8c - NB_CELL_CHAN_REQD (Section 22.6.3.3.2.7 )
MC8d - NB_CELL_IMM_ASS_REJ (Section 22.6.3.3.2.8 )
MC924a - TIME_SPDCH_LIMIT_HIGH_LOAD (Section 22.6.3.5.2.8 )
MC925a - NB_AGCH_USEFUL_BLOCKS_SENT (Section 22.6.3.2.2.1 )
MC925b - NB_PCH_USEFUL_BLOCKS_SENT (Section 22.6.3.2.2.2 )
MC925c - NB_BUSY_RACH_SLOTS (Section 22.6.3.2.2.3 )
MC925d - NB_CHANNEL_RQ_RADIO (Section 22.6.3.2.2.4 )
MC925e - NB_ASSIGN_CMD_RECEIVED_ABIS (Section 22.6.3.2.2.5 )
MC925f - NB_ASSIGN_CMD_DISCARDED (Section 22.6.3.2.2.6 )
MC925g - NB_PAGING_CMD_RECEIVED_ABIS (Section 22.6.3.2.2.7 )
MC925h - NB_PAGING_CMD_DISCARDED (Section 22.6.3.2.2.8 )
MC930 - NB_ABIS_PAGING_MESSAGE_RECEIVED (Section 22.6.3.2.2.9 )
737 / 1392
22.6.3.2
22.6.3.2.1 All
22.6.3.2.2
22.6.3.2.2.1 MC925a - NB_AGCH_USEFUL_BLOCKS_SENT
Long Name
NB_AGCH_USEFUL_BLOCKS_SENT
Definition
Number of useful blocks sent on AGCH channel (The dummy blocks are not
counted).
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
738 / 1392
NB_PCH_USEFUL_BLOCKS_SENT
Definition
Number of useful blocks sent on PCH channel (The dummy blocks are not
counted).
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
739 / 1392
NB_BUSY_RACH_SLOTS
Definition
Trigger condition
Each 51-multiframes the Layer 1 reports the load on the RACH via the
RACH_MEASUREMENTS_RESULTS message, which contains the
following information: - N_VRACH: number of Access Bursts successfully
decoded - N_BUSY: number of RACH busy slots On reception of this
message, the following counters are updated: - NB_BUSY_RACH_SLOTS =
NB_BUSY_RACH_SLOTS + N_BUSY Note: for cells mapped on non-Evolium
BTS, the value of this counter is set to zero.
Sub Domain 1
Channel
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
740 / 1392
NB_CHANNEL_RQ_RADIO
Definition
Trigger condition
Each 51-multiframes the Layer 1 reports the load on the RACH via the
RACH_MEASUREMENTS_RESULTS message, which contains the
following information: - N_VRACH: number of Access Bursts successfully
decoded - N_BUSY: number of RACH busy slots On reception of this
message, the following counters are updated: - NB_CHANNEL_RQ_RADIO
= NB_CHANNEL_RQ_RADIO + N_VRACH Note: for cells mapped on
non-Evolium BTS, the value of this counter is set to zero.
Sub Domain 1
Channel
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
741 / 1392
NB_ASSIGN_CMD_RECEIVED_ABIS
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
742 / 1392
NB_ASSIGN_CMD_DISCARDED
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
743 / 1392
NB_PAGING_CMD_RECEIVED_ABIS
Definition
Trigger condition
1) Applicable to the legacy BSC only: this counter is increased by one each time
a PAGING COMMAND message is received on Abis interface. 2) Applicable
to the BSC Evolution only: a) This counter is increased by one each time a
PAGING COMMAND message is received on Abis interface. b) This counter
is increased by "n" each time a MULTIPLE PAGING COMMAND message is
received on Abis interface ("n" is the number of PAGING COMMAND contained
in the received MULTIPLE PAGING COMMAND message). Note: for cells
mapped on non-Evolium BTS, the value of this counter is set to zero.
Sub Domain 1
Channel
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
744 / 1392
NB_PAGING_CMD_DISCARDED
Definition
Trigger condition
1) Applicable to the legacy BSC only: this counter is increased by one each
time a PAGING COMMAND is discarded on detection of Paging_Group FIFO
overload. 2) Applicable to the BSC Evolution only: This counter is increased
by one each time a PAGING COMMAND is discarded on detection of Paging
Group FIFO overloaded (Note 1). Note 1: It does not matter whether the
discarded (and counted) PAGING COMMAND was received in an individual
PAGING COMMAND message or if it was received (as one of several PAGING
COMMANDs) within a MULTIPLE PAGING COMMAND message. Note: for
cells mapped on non-Evolium BTS, the value of this counter is set to zero.
Sub Domain 1
Channel
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
745 / 1392
NB_ABIS_PAGING_MESSAGE_RECEIVED
Definition
Trigger condition
For legacy BSC, the value of this counter shall be set to "0". For BSC
EVOLUTION: a) This counter is increased by one each time a PAGING
COMMAND message is received on Abis interface. b) This counter is increased
by one each time a MULTIPLE PAGING COMMAND message is received on
Abis interface. Note: for cells mapped on non-Evolium BTS, the value of this
counter is set to zero.
Sub Domain 1
Channel
Sub Domain 2
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
746 / 1392
22.6.3.3 CCCH
22.6.3.3.1 All CCCH
MC804a - NB_UL_SINGLE_BLOCK_SIG_RACH (Section 22.6.3.3.2.1 )
MC804b - NB_UL_ONE_PHASE_SIG_RACH (Section 22.6.3.3.2.2 )
MC805a - NB_CHANNEL_ASSIGN_DL_AGCH (Section 22.6.3.3.2.3 )
MC805b - NB_CHANNEL_ASSIGN_DL_PCH (Section 22.6.3.3.2.4 )
MC8a - NB_CELL_PAGING_CMD (Section 22.6.3.3.2.5 )
MC8b - NB_CELL_IMM_ASS_CMD (Section 22.6.3.3.2.6 )
MC8c - NB_CELL_CHAN_REQD (Section 22.6.3.3.2.7 )
MC8d - NB_CELL_IMM_ASS_REJ (Section 22.6.3.3.2.8 )
22.6.3.3.2
22.6.3.3.2.1 MC804a - NB_UL_SINGLE_BLOCK_SIG_RACH
Long Name
NB_UL_SINGLE_BLOCK_SIG_RACH
Definition
Number of Channel Request messages with access cause "Single block packet
access" received by the BSS.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
CCCH
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
747 / 1392
NB_UL_ONE_PHASE_SIG_RACH
Definition
Number of Channel Request messages with access cause "One phase packet
access with request for single timeslot uplink transmission" received by the BSS.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
CCCH
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
748 / 1392
NB_CHANNEL_ASSIGN_DL_AGCH
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
CCCH
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
749 / 1392
NB_CHANNEL_ASSIGN_DL_PCH
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
CCCH
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
750 / 1392
NB_CELL_PAGING_CMD
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
CCCH
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
751 / 1392
NB_CELL_IMM_ASS_CMD
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
CCCH
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
752 / 1392
NB_CELL_CHAN_REQD
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
CCCH
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
753 / 1392
NB_CELL_IMM_ASS_REJ
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
CCCH
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
754 / 1392
22.6.3.4 SDCCH
22.6.3.4.1 All SDCCH
MC400 - TIME_TRX_SDCCH_BUSY (Section 22.6.3.4.2.1 )
22.6.3.4.2
22.6.3.4.2.1 MC400 - TIME_TRX_SDCCH_BUSY
Long Name
TIME_TRX_SDCCH_BUSY
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
SDCCH
Sub Domain 3
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
755 / 1392
22.6.3.5 TCH
22.6.3.5.1 All TCH
MC380a - TIME_TRX_FR_BUSY (Section 22.6.3.5.2.1 )
MC380b - TIME_TRX_HR_BUSY (Section 22.6.3.5.2.2 )
MC380c - TIME_TRX_GSM_FR_BUSY (Section 22.6.3.5.2.3 )
MC380d - TIME_TRX_GSM_HR_BUSY (Section 22.6.3.5.2.4 )
MC380e - TIME_TRX_DCS_FR_BUSY (Section 22.6.3.5.2.5 )
MC380f - TIME_TRX_DCS_HR_BUSY (Section 22.6.3.5.2.6 )
MC381 - TIME_TRX_TCH_BUSY_BY_MULTIBAND_MS (Section 22.6.3.5.2.7 )
MC924a - TIME_SPDCH_LIMIT_HIGH_LOAD (Section 22.6.3.5.2.8 )
22.6.3.5.2
22.6.3.5.2.1 MC380a - TIME_TRX_FR_BUSY
Long Name
TIME_TRX_FR_BUSY
Definition
Time (in seconds) during which the TCH radio timeslot in FR usage is busy
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
756 / 1392
TIME_TRX_HR_BUSY
Definition
Time (in seconds) during which the TCH radio timeslot in HR usage is busy
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
757 / 1392
TIME_TRX_GSM_FR_BUSY
Definition
Time (in seconds) during which the TCH radio timeslot or dynamic SDCCH/8
timeslot in the GSM frequency band is busy in FR usage. This counter takes
into account TCH in traffic or in signaling mode.
Trigger condition
The counter cumulates over the Accumulation Period, per radio timeslot, all unit
times during which the TCH FR channel in the GSM frequency band is busy. For
each channel allocation: The counter starts being incremented after the sending
of the 48.058 CHANNEL ACTIVATION message to the cell concerning a full rate
TCH channel for the related TRX timeslot. The counter stops being incremented
after the reception of a 48.058 RF CHANNEL RELEASE ACKNOWLEDGE
message or the expiry of timer T_RCR_ACK twice (after the sending of the
48.058 RF CHANNEL RELEASE message) concerning the TCH channel
previously activated on the related TRX timeslot.
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
758 / 1392
TIME_TRX_GSM_HR_BUSY
Definition
Time (in seconds) during which the TCH radio timeslot or dynamic SDCCH/8
timeslot in the GSM frequency band is busy in HR usage.
Trigger condition
The counter cumulates over the Accumulation Period, per radio timeslot, all unit
times during which the TCH HR channel in the GSM frequency band is busy.
For each channel allocation: The counter starts being incremented after the
sending of the 48.058 CHANNEL ACTIVATION message to the cell concerning
a half rate TCH channel for the related TRX timeslot. The counter stops
being incremented after the reception of a 48.058 RF CHANNEL RELEASE
ACKNOWLEDGE message or the expiry of timer T_RCR_ACK twice (after the
sending of the 48.058 RF CHANNEL RELEASE message) concerning the TCH
channel previously activated on the related TRX timeslot.
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
759 / 1392
TIME_TRX_DCS_FR_BUSY
Definition
Time (in seconds) during which the TCH radio timeslot or dynamic SDCCH/8
timeslot in the DCS/PCS frequency band is busy in FR usage. This counter
takes into account TCH in traffic or in signaling mode.
Trigger condition
The counter cumulates over the Accumulation Period, per radio timeslot, all
unit times during which the TCH FR channel in the DCS/PCS frequency band
is busy. For each channel allocation: The counter starts being incremented
after the sending of the 48.058 CHANNEL ACTIVATION message to the
cell concerning a full rate TCH channel for the related TRX timeslot. The
counter stops being incremented after the reception of a 48.058 RF CHANNEL
RELEASE ACKNOWLEDGE message or the expiry of timer T_RCR_ACK twice
(after the sending of the 48.058 RF CHANNEL RELEASE message) concerning
the TCH channel previously activated on the related TRX timeslot.
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
760 / 1392
TIME_TRX_DCS_HR_BUSY
Definition
Time (in seconds) during which the TCH radio timeslot or dynamic SDCCH/8
timeslot in the DCS/PCS frequency band is busy in HR usage.
Trigger condition
The counter cumulates over the Accumulation Period, per radio timeslot, all
unit times during which the TCH HR channel in the DCS/PCS frequency band
is busy. For each channel allocation: The counter starts being incremented
after the sending of the 48.058 CHANNEL ACTIVATION message to the
cell concerning a half rate TCH channel for the related TRX timeslot. The
counter stops being incremented after the reception of a 48.058 RF CHANNEL
RELEASE ACKNOWLEDGE message or the expiry of timer T_RCR_ACK twice
(after the sending of the 48.058 RF CHANNEL RELEASE message) concerning
the TCH channel previously activated on the related TRX timeslot.
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
761 / 1392
TIME_TRX_TCH_BUSY_BY_MULTIBAND_MS
Definition
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
762 / 1392
TIME_SPDCH_LIMIT_HIGH_LOAD
Definition
Time during which the cell is in high load situation for PS traffic. This situation
impacts the number of slave PDCHs that can be allocated to the MFS.
Trigger condition
Sub Domain 1
Channel
Sub Domain 2
TCH
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
763 / 1392
22.6.4 Interface
22.6.4.1 All Interface
MC350 - NB_N7_CON_REQ (Section 22.6.4.2.2.1 )
MC351 - NB_N7_CON_CONF (Section 22.6.4.2.2.2 )
22.6.4.2 A
22.6.4.2.1 All A
MC350 - NB_N7_CON_REQ (Section 22.6.4.2.2.1 )
MC351 - NB_N7_CON_CONF (Section 22.6.4.2.2.2 )
22.6.4.2.2 SCCP
22.6.4.2.2.1 MC350 - NB_N7_CON_REQ
Long Name
NB_N7_CON_REQ
Definition
MC350=C253+C254
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
SCCP
Measured Object
N7 Signalling Link
Type Name
Overview measurements
Type Definition
External Comment
764 / 1392
NB_N7_CON_CONF
Definition
MC351=C255+C256
Trigger condition
Sub Domain 1
Interface
Sub Domain 2
Sub Domain 3
SCCP
Measured Object
N7 Signalling Link
Type Name
Overview measurements
Type Definition
External Comment
765 / 1392
22.6.5.2.2 External
22.6.5.2.2.1 MC144f - NB_OUT_EDR_REQ
Long Name
NB_OUT_EDR_REQ
Definition
MC144f=C144b+C144d
Trigger condition
Sub Domain 1
Sub Domain 2
Directed Retry
Sub Domain 3
External
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
766 / 1392
22.6.5.2.3 Internal
22.6.5.2.3.1 MC144e - NB_OUT_IDR_REQ
Long Name
NB_OUT_IDR_REQ
Definition
MC144e=C144a+C144c
Trigger condition
Sub Domain 1
Sub Domain 2
Directed Retry
Sub Domain 3
Internal
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
767 / 1392
NB_INC_IDR_ALLOC
Definition
Trigger condition
The counter is incremented on the target cell whenever the 48.058 CHANNEL
ACTIVATION message of a TCH channel is about to be sent during an internal
directed retry.
Sub Domain 1
Sub Domain 2
Directed Retry
Sub Domain 3
Internal
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
768 / 1392
22.6.5.3 Handover
22.6.5.3.1 All Handover
MC13b - NB_INC_EXT_TCH_HO_QUEUED (Section 22.6.5.3.3.1 )
MC147 - NB_INC_SDCCH_HO_ALLOC (Section 22.6.5.3.2.1 )
MC15b - NB_INC_TCH_HO_ALLOC (Section 22.6.5.3.3.2 )
22.6.5.3.2 SDCCH
22.6.5.3.2.1 MC147 - NB_INC_SDCCH_HO_ALLOC
Long Name
NB_INC_SDCCH_HO_ALLOC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Handover
Sub Domain 3
SDCCH
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
769 / 1392
22.6.5.3.3 TCH
22.6.5.3.3.1 MC13b - NB_INC_EXT_TCH_HO_QUEUED
Long Name
NB_INC_EXT_TCH_HO_QUEUED
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Handover
Sub Domain 3
TCH
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
770 / 1392
NB_INC_TCH_HO_ALLOC
Definition
Trigger condition
The counter is incremented on the target cell whenever the 48.058 CHANNEL
ACTIVATION message of a TCH channel is about to be sent during any
handover procedure. Note: This counter counts both inter-PLMN and
intra-PLMN handover events.
Sub Domain 1
Sub Domain 2
Handover
Sub Domain 3
TCH
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
771 / 1392
22.6.5.4.2
22.6.5.4.2.1 MC148 - NB_IMM_ASS_ALLOC
Long Name
NB_IMM_ASS_ALLOC
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Immediate Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
772 / 1392
22.6.5.5 Multiband
22.6.5.5.1 All Multiband
MC850 - NB_MULTIBAND_MS_ACCESS_EXCEPT_LU_CELL (Section
22.6.5.5.2.1 )
22.6.5.5.2
22.6.5.5.2.1 MC850 - NB_MULTIBAND_MS_ACCESS_EXCEPT_LU_CELL
Long Name
NB_MULTIBAND_MS_ACCESS_EXCEPT_LU_CELL
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Multiband
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
773 / 1392
22.6.5.6.2
22.6.5.6.2.1 MC13a - NB_TCH_NOR_ASS_QUEUED
Long Name
NB_TCH_NOR_ASS_QUEUED
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Measured Object
Common cell
Type Name
Overview measurements
Type Definition
External Comment
774 / 1392
NB_TCH_NOR_ASS_ALLOC_TRX
Definition
Trigger condition
Sub Domain 1
Sub Domain 2
Normal Assignment
Sub Domain 3
Measured Object
TRX
Type Name
Overview measurements
Type Definition
External Comment
775 / 1392
776 / 1392
777 / 1392
23.2 Adjacency
23.2.1 All Adjacency
C400 - NB_ADJ_BSC_INC_HO_REQ (Section 23.2.2.2.2.1 )
C401 - NB_ADJ_BSC_INC_HO_ATPT (Section 23.2.2.2.2.2 )
C402 - NB_ADJ_BSC_INC_HO_SUCC (Section 23.2.2.2.2.3 )
23.2.2 BSC
23.2.2.1 All BSC
C400 - NB_ADJ_BSC_INC_HO_REQ (Section 23.2.2.2.2.1 )
C401 - NB_ADJ_BSC_INC_HO_ATPT (Section 23.2.2.2.2.2 )
C402 - NB_ADJ_BSC_INC_HO_SUCC (Section 23.2.2.2.2.3 )
778 / 1392
23.2.2.2
23.2.2.2.1 All
23.2.2.2.2
23.2.2.2.2.1 C400 - NB_ADJ_BSC_INC_HO_REQ
Long Name
NB_ADJ_BSC_INC_HO_REQ
Definition
Trigger condition
Sub Domain 1
BSC
Sub Domain 2
Sub Domain 3
Measured Object
Adjacency-CGI
Type Name
Type Definition
External Comment
779 / 1392
NB_ADJ_BSC_INC_HO_ATPT
Definition
Trigger condition
Sub Domain 1
BSC
Sub Domain 2
Sub Domain 3
Measured Object
Adjacency-CGI
Type Name
Type Definition
External Comment
780 / 1392
NB_ADJ_BSC_INC_HO_SUCC
Definition
Trigger condition
Sub Domain 1
BSC
Sub Domain 2
Sub Domain 3
Measured Object
Adjacency-CGI
Type Name
Type Definition
External Comment
781 / 1392
782 / 1392
24 MFS-GPRS Counters
24 MFS-GPRS Counters
783 / 1392
24 MFS-GPRS Counters
784 / 1392
24 MFS-GPRS Counters
785 / 1392
24 MFS-GPRS Counters
786 / 1392
24 MFS-GPRS Counters
787 / 1392
24 MFS-GPRS Counters
788 / 1392
24 MFS-GPRS Counters
789 / 1392
24 MFS-GPRS Counters
790 / 1392
24 MFS-GPRS Counters
791 / 1392
24 MFS-GPRS Counters
792 / 1392
24 MFS-GPRS Counters
793 / 1392
24 MFS-GPRS Counters
794 / 1392
24 MFS-GPRS Counters
P52a - CUMULATED_ACTIVE_DL_CONNECTION_TIME_GPRS_ACK
(Section 24.3.5.3.2.15 )
P52b - CUMULATED_ACTIVE_DL_CONNECTION_TIME_GPRS_NACK
(Section 24.3.5.3.2.16 )
P52c - CUMULATED_ACTIVE_DL_CONNECTION_TIME_EGPRS_ACK
(Section 24.3.5.3.2.17 )
P52d - CUMULATED_ACTIVE_DL_CONNECTION_TIME_EGPRS_NACK
(Section 24.3.5.3.2.18 )
P530a_1 - NB_MS_MULTISLOT_CLASS_0_TO_10 (Section 24.4.4.8.2.6 )
P530a_2 - NB_MS_MULTISLOT_CLASS_11_TO_12 (Section 24.4.4.8.2.7 )
P530a_3 - NB_MS_MULTISLOT_CLASS_3X (Section 24.4.4.8.2.8 )
P530a_4 - NB_MS_MULTISLOT_CLASS_4X (Section 24.4.4.8.2.9 )
P530a_5 - NB_MS_MULTISLOT_CLASS_30_TO_34 (Section 24.4.4.8.2.10 )
P530b_5 - NB_MS_MULTISLOT_CLASS_31_TO_34 (Section 24.4.4.8.2.11 )
P531a_1 - DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_1 (Section
24.3.5.8.2.1 )
P531a_10 - DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_10 (Section
24.3.5.8.2.2 )
P531a_11 - DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_11 (Section
24.3.5.8.2.3 )
P531a_2 - DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_2 (Section
24.3.5.8.2.4 )
P531a_3 - DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_3 (Section
24.3.5.8.2.5 )
P531a_4 - DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_4 (Section
24.3.5.8.2.6 )
P531a_5 - DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_5 (Section
24.3.5.8.2.7 )
P531a_6 - DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_6 (Section
24.3.5.8.2.8 )
P531a_7 - DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_7 (Section
24.3.5.8.2.9 )
P531a_8 - DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_8 (Section
24.3.5.8.2.10 )
P531a_9 - DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_9 (Section
24.3.5.8.2.11 )
P531b_1 - DISTRIB_DL_EGPRS_LLC_THROUGHPUT_CLASS_1 (Section
24.3.5.2.2.1 )
P531b_10 - DISTRIB_DL_EGPRS_LLC_THROUGHPUT_CLASS_10 (Section
24.3.5.2.2.2 )
P531b_11 - DISTRIB_DL_EGPRS_LLC_THROUGHPUT_CLASS_11 (Section
24.3.5.2.2.3 )
P531b_2 - DISTRIB_DL_EGPRS_LLC_THROUGHPUT_CLASS_2 (Section
24.3.5.2.2.4 )
795 / 1392
24 MFS-GPRS Counters
796 / 1392
24 MFS-GPRS Counters
797 / 1392
24 MFS-GPRS Counters
798 / 1392
24 MFS-GPRS Counters
799 / 1392
24 MFS-GPRS Counters
800 / 1392
24 MFS-GPRS Counters
801 / 1392
24 MFS-GPRS Counters
802 / 1392
24 MFS-GPRS Counters
803 / 1392
24 MFS-GPRS Counters
804 / 1392
24 MFS-GPRS Counters
805 / 1392
24 MFS-GPRS Counters
24.2.2.2 LapD
24.2.2.2.1 All LapD
P2a - NB_LAPD_INFO_FRAME_RESENT (Section 24.2.2.2.2.1 )
P2b - NB_LAPD_RNR_SENT (Section 24.2.2.2.2.2 )
P2c - NB_LAPD_RNR_REC (Section 24.2.2.2.2.3 )
P2d - NB_LAPD_EST (Section 24.2.2.2.2.4 )
24.2.2.2.2 N/A
24.2.2.2.2.1 P2a - NB_LAPD_INFO_FRAME_RESENT
Long Name
NB_LAPD_INFO_FRAME_RESENT
Definition
Trigger Condition
Sub Domain 1
Ater interface
Sub Domain 2
LapD
Sub Domain 3
N/A
Measured Object
LapD
External Comment
The (decimal) value 1 000 000 means Driver LAPD not available. LAPD not
established. Note : P32 indicates the time the LAPD is not available
806 / 1392
24 MFS-GPRS Counters
NB_LAPD_RNR_SENT
Definition
Number of Receive Not Ready (RNR) frames sent on the LapD logical link.
Trigger Condition
Sub Domain 1
Ater interface
Sub Domain 2
LapD
Sub Domain 3
N/A
Measured Object
LapD
External Comment
The (decimal) value 1 000 000 means Driver LAPD not available. LAPD not
established. Note : P32 indicates the time the LAPD is not available
807 / 1392
24 MFS-GPRS Counters
NB_LAPD_RNR_REC
Definition
Number of Receive Not Ready (RNR) frames received on the LapD logical link.
Trigger Condition
Sub Domain 1
Ater interface
Sub Domain 2
LapD
Sub Domain 3
N/A
Measured Object
LapD
External Comment
The (decimal) value 1 000 000 means Driver LAPD not available. LAPD not
established. Note : P32 indicates the time the LAPD is not available
808 / 1392
24 MFS-GPRS Counters
NB_LAPD_EST
Definition
Number of data link establishment, re-establishment and reset on the LapD logical
link.
Trigger Condition
1) Whenever the MFS receives SABME while the LapD is in established state.
2) Whenever the MFS receives the acknowledgment UA of SABME sent to the
BSC in LapD established state.
Sub Domain 1
Ater interface
Sub Domain 2
LapD
Sub Domain 3
N/A
Measured Object
LapD
External Comment
The (decimal) value 1 000 000 means Driver LAPD not available. LAPD not
established. Note : P32 indicates the time the LAPD is not available
809 / 1392
24 MFS-GPRS Counters
24.2.3 Gb interface
24.2.3.1 All Gb interface
P3a - NB_BEAR_CHAN_FRAMES_DISC_INVALID_FCS (Section 24.2.3.2.2.1
)
P3b - NB_BEAR_CHAN_FRAMES_DISC_INVALID_ADDR (Section
24.2.3.2.2.2 )
P6a - NB_PVC_FRAMES_DISC_7_CONSEC_1 (Section 24.2.3.3.2.1 )
P6b - NB_PVC_FRAMES_DISC_ZERO_INSER (Section 24.2.3.3.2.2 )
P6c - NB_PVC_FRAMES_DISC_LENGTH_TOO_LARGE (Section 24.2.3.3.2.3
)
P6d - NB_PVC_FRAMES_DISC_LENGTH_TOO_SHORT (Section
24.2.3.3.2.4 )
24.2.3.2.2 N/A
24.2.3.2.2.1 P3a - NB_BEAR_CHAN_FRAMES_DISC_INVALID_FCS
Long Name
NB_BEAR_CHAN_FRAMES_DISC_INVALID_FCS
Definition
Trigger Condition
Whenever a frame received on the Bearer Channel is discarded due to invalid FCS.
Sub Domain 1
Gb interface
Sub Domain 2
Bearer Channel
Sub Domain 3
N/A
Measured Object
Bearer Channel
External Comment
810 / 1392
24 MFS-GPRS Counters
NB_BEAR_CHAN_FRAMES_DISC_INVALID_ADDR
Definition
Trigger Condition
Sub Domain 1
Gb interface
Sub Domain 2
Bearer Channel
Sub Domain 3
N/A
Measured Object
Bearer Channel
External Comment
811 / 1392
24 MFS-GPRS Counters
24.2.3.3 PVC
24.2.3.3.1 All PVC
P6a - NB_PVC_FRAMES_DISC_7_CONSEC_1 (Section 24.2.3.3.2.1 )
P6b - NB_PVC_FRAMES_DISC_ZERO_INSER (Section 24.2.3.3.2.2 )
P6c - NB_PVC_FRAMES_DISC_LENGTH_TOO_LARGE (Section 24.2.3.3.2.3
)
P6d - NB_PVC_FRAMES_DISC_LENGTH_TOO_SHORT (Section
24.2.3.3.2.4 )
24.2.3.3.2 N/A
24.2.3.3.2.1 P6a - NB_PVC_FRAMES_DISC_7_CONSEC_1
Long Name
NB_PVC_FRAMES_DISC_7_CONSEC_1
Definition
Trigger Condition
Whenever a frame received on the PVC is discarded due to seven bits set to "1".
Sub Domain 1
Gb interface
Sub Domain 2
PVC
Sub Domain 3
N/A
Measured Object
Bearer Channel
External Comment
812 / 1392
24 MFS-GPRS Counters
NB_PVC_FRAMES_DISC_ZERO_INSER
Definition
Trigger Condition
Whenever a frame received on the PVC is discarded due to a non integral number
of octets (zero insertion failure).
Sub Domain 1
Gb interface
Sub Domain 2
PVC
Sub Domain 3
N/A
Measured Object
Bearer Channel
External Comment
813 / 1392
24 MFS-GPRS Counters
NB_PVC_FRAMES_DISC_LENGTH_TOO_LARGE
Definition
Number of frames discarded received on the PVC because of length greater than
the maximum allowed (FR-INFO-SIZE.Max).
Trigger Condition
Whenever a frame received on the PVC is discarded due to the length greater than
the maximum allowed.
Sub Domain 1
Gb interface
Sub Domain 2
PVC
Sub Domain 3
N/A
Measured Object
PVC
External Comment
814 / 1392
24 MFS-GPRS Counters
NB_PVC_FRAMES_DISC_LENGTH_TOO_SHORT
Definition
Number of frames discarded received on the PVC because of length shorter than
the minimum allowed (FR-INFO-SIZE.Min).
Trigger Condition
Whenever a frame received on the PVC is discarded due to the length lower than
the minimum allowed.
Sub Domain 1
Gb interface
Sub Domain 2
PVC
Sub Domain 3
N/A
Measured Object
PVC
External Comment
815 / 1392
24 MFS-GPRS Counters
816 / 1392
24 MFS-GPRS Counters
817 / 1392
24 MFS-GPRS Counters
818 / 1392
24 MFS-GPRS Counters
819 / 1392
24 MFS-GPRS Counters
820 / 1392
24 MFS-GPRS Counters
821 / 1392
24 MFS-GPRS Counters
24.2.4.2.2 NACC
24.2.4.2.2.1 P212 - TIME_SOURCE_NACC_CELL_RESEL
Long Name
TIME_SOURCE_NACC_CELL_RESEL
Definition
Trigger Condition
Within the granularity period, the MFS cumulates the duration of each successful
outgoing NACC cell reselections triggered by the BSS in the source cell. The
duration of a NACC cell reselection is measured in the source cell between the
start of emission of Packet Neighbour Cell Data messages (following the reception
of the Packet Cell Change Notification message) and the reception of the Flush-LL
message. The source cell is the cell where the cell reselections are outgoing.
Sub Domain 1
Radio interface
Sub Domain 2
Cell reselections
Sub Domain 3
NACC
Measured Object
Cell
External Comment
822 / 1392
24 MFS-GPRS Counters
NB_SOURCE_NACC_CELL_RESEL
Definition
Number of successful Network Assisted cell reselection in the source cell in NC0
mode.
Trigger Condition
Within the granularity period, the MFS counts the number of each successful
outgoing NACC cell reselections triggered by the BSS in the source cell. A NACC
cell reselection is successful when in the source cell after the start of emission
of Packet Neighbour Cell Data messages (following the reception of the Packet
Cell Change Notification message) , the reception of the Flush-LL message is
received. The source cell is the cell where the cell reselections are outgoing.
Sub Domain 1
Radio interface
Sub Domain 2
Cell reselections
Sub Domain 3
NACC
Measured Object
Cell
External Comment
823 / 1392
24 MFS-GPRS Counters
NB_NEIGH_PSI_PROC
Definition
Trigger Condition
In NC0 mode : Whenever neighbour (P)SI messages are sent by RRM to RLC
following a reception of PACKET CELL CHANGE
Sub Domain 1
Radio interface
Sub Domain 2
Cell reselections
Sub Domain 3
NACC
Measured Object
Cell
External Comment
824 / 1392
24 MFS-GPRS Counters
MAX_SOURCE_NACC_CELL_RESEL_TIME
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Cell reselections
Sub Domain 3
NACC
Measured Object
Cell
External Comment
825 / 1392
24 MFS-GPRS Counters
MIN_SOURCE_NACC_CELL_RESEL_TIME
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Cell reselections
Sub Domain 3
NACC
Measured Object
Cell
External Comment
826 / 1392
24 MFS-GPRS Counters
NB_PSI_PROC
Definition
Number of times the procedure of broadcast of serving cell PSI for Packet PSI
Status or the procedure of sending of Packet Serving Cell Data for Packet SI
Status is invoked.
Trigger Condition
Whenever RRM sends a request to PTU to send serving cell (P)SI to the MS for
Packet (P)SI Status procedure. The primitive used as trigger is PCC-PSCD-REQ.
Sub Domain 1
Radio interface
Sub Domain 2
Cell reselections
Sub Domain 3
Measured Object
Cell
External Comment
827 / 1392
24 MFS-GPRS Counters
24.2.4.3.2 N/A
24.2.4.3.2.1 P397 - NB_FLUSH_MESSAGES
Long Name
NB_FLUSH_MESSAGES
Definition
Number of successful NC0 or NC2 cell reselections for MS in GMM Ready state
(either in packet idle mode or packet transfer mode)
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
Note that NC2 cell reselections can only be triggered if the MS is in packet transfer
mode
828 / 1392
24 MFS-GPRS Counters
NB_NC0_CELL_RESEL_Mstrans
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
829 / 1392
24 MFS-GPRS Counters
830 / 1392
24 MFS-GPRS Counters
24.2.4.4.2 N/A
24.2.4.4.2.1 P209 - TIME_SOURCE_NC2_CELL_RESEL
Long Name
TIME_SOURCE_NC2_CELL_RESEL
Definition
Trigger Condition
Within the granularity period, the MFS cumulates the duration of each successful
outgoing NC2 cell reselections triggered by the BSS in the source cell. The
duration of a NC2 cell reselection is measured in the source cell between the
acknowledgement of the Packet Cell Change Order message and the reception of
the Flush-LL message. The source cell is the cell where the NC cell reselections
are outgoing.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
The MFS can measure the duration of a NC cell reselection provided that the
Flush-LL message is received while the timer T_WAIT_FLUSH is still running. This
means that NC cell reselection duration longer than the timer T_WAIT_FLUSH
cannot be measured by this counter.
831 / 1392
24 MFS-GPRS Counters
TIME_TARGET_NC2_CELL_RESEL
Definition
Trigger Condition
Within the granularity period, the MFS cumulates the duration of the successful
incoming intra-RA intra-MFS NC2 cell reselections triggered by the BSS in the
source cell. The duration of a NC2 cell reselection is measured in the source cells
between the acknowledgement of the Packet Cell Change Order message and
the reception of the Flush-LL message. These measures are forwarded to the
target cell in the intra-MFS TLLI Rerouting Confirm message and then cumulated
in the target cell. The source cells are the cells where the NC cell reselections
are outgoing, whereas the target cell is the cell where the NC cell reselections
are incoming.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1) Only NC2 cell reselections involving a source cell which belongs to the same
routing area and same MFS as the target cell are taken into account in this
average. 2) The MFS can measure the duration of a NC cell reselection provided
that the Flush-LL message is received while the timer T_WAIT_FLUSH is still
running. This means that NC cell reselection duration longer than the timer
T_WAIT_FLUSH cannot be measured by this counter.
832 / 1392
24 MFS-GPRS Counters
NB_TARGET_NC2_CELL_RESEL
Definition
Trigger Condition
Within the granularity period, the MFS counts the number of each successful
outgoing NC2 cell reselections triggered by the BSS in the source cell. A NC2
cell reselection is successful when in the source cells after the acknowledgement
of the Packet Cell Change Order message is received , the Flush-LL message is
received. These measures are forwarded to the target cell in the intra-MFS TLLI
Rerouting Confirm message and then cumulated in the target cell. The source
cells are the cells where the NC cell reselections are outgoing, whereas the target
cell is the cell where the NC cell reselections are incoming.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1) Only NC2 cell reselections involving a source cell which belongs to the same
routing area and same MFS as the target cell are taken into account in this
average. 2) The MFS can measure the duration of a NC cell reselection provided
that the Flush-LL message is received while the timer T_WAIT_FLUSH is still
running. This means that NC cell reselection duration longer than the timer
T_WAIT_FLUSH cannot be measured by this counter.
833 / 1392
24 MFS-GPRS Counters
NB_PCCO_ACK_UL_NC2_CELL_RESEL
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
834 / 1392
24 MFS-GPRS Counters
NB_PCCO_ACK_DL_NC2_CELL_RESEL
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
835 / 1392
24 MFS-GPRS Counters
NB_PCCO_NC2_CELL_RESEL_DL_TBF
Definition
Trigger Condition
This counter is incremented whenever the MFS sends a Packet Cell Change Order
message to the MS while it has an ongoing DL TBF.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
If a PCCO is sent for a MS supporting a DL TBF and an UL TBF, then both P223
and P226 are incremented.
836 / 1392
24 MFS-GPRS Counters
NB_FLUSH_NC2_CELL_RESEL_DL_TBF
Definition
Number of FLUSH-LL PDU received after a Packet Cell Change Order has been
sent to the MS while in DL transfer.
Trigger Condition
Whenever the MFS receives a FLUSH-LL PDU from the SGSN after a Packet
Cell Change Order message has been sent to the MS while it has an ongoing in
DL TBF .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
837 / 1392
24 MFS-GPRS Counters
NB_PCCF_NC2_CELL_RESEL_DL_TBF
Definition
Number of Packet Cell Change Failure received from the MS after a Packet Cell
Change Order has been sent to the MS while in DL transfer.
Trigger Condition
Whenever the MFS receives a Packet Cell Change Failure message from the MS
after a Packet Cell Change Order message has been sent to the MS while it has
an ongoing DL TBF .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
838 / 1392
24 MFS-GPRS Counters
NB_PCCO_NC2_CELL_RESEL_UL_TBF
Definition
Trigger Condition
This counter is incremented whenever the MFS sends a Packet Cell Change Order
message to the MS while it has an ongoing UL TBF.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
If a PCCO is sent for a MS supporting a DL TBF and an UL TBF, then both P223
and P226 are incremented.
839 / 1392
24 MFS-GPRS Counters
NB_FLUSH_NC2_CELL_RESEL_UL_TBF
Definition
Number of FLUSH-LL PDU received after a Packet Cell Change Order has been
sent to the MS while in UL transfer.
Trigger Condition
Whenever the MFS receives a FLUSH-LL PDU from the SGSN after a Packet Cell
Change Order message has been sent to the MS while it has an ongoing UL TBF .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
840 / 1392
24 MFS-GPRS Counters
NB_PCCF_NC2_CELL_RESEL_UL_TBF
Definition
Number of Packet Cell Change Failure received from the MS after a Packet Cell
Change Order has been sent to the MS while in UL transfer.
Trigger Condition
Whenever the MFS receives a Packet Cell Change Failure message from the MS
after a Packet Cell Change Order message has been sent to the MS while it has
an ongoing UL TBF .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
841 / 1392
24 MFS-GPRS Counters
MAX_SOURCE_NC2_CELL_RESEL_TIME
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
842 / 1392
24 MFS-GPRS Counters
MIN_SOURCE_NC2_CELL_RESEL_TIME
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
843 / 1392
24 MFS-GPRS Counters
MAX_TARGET_NC2_CELL_RESEL_TIME
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
844 / 1392
24 MFS-GPRS Counters
MIN_TARGET_NC2_CELL_RESEL_TIME
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
845 / 1392
24 MFS-GPRS Counters
NB_NC2_CELL_RESEL_REQ_PT1
Definition
Number of NC2 cell reselection requests for a MS in packet transfer mode due
to a "too low downlink received signal" (Cause PT1)
Trigger Condition
This counter is incremented whenever the RRM layer sends to the MS a Packet
Cell Change Order message for a NC2 cell reselection triggered due a "too low
downlink received signal" (Cause PT1). The repetitions of the Packet Cell Change
Order message for a given NC2 cell reselection alarm are not counted.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
846 / 1392
24 MFS-GPRS Counters
NB_NC2_CELL_RESEL_REQ_PT2
Definition
Number of NC2 cell reselection requests for a MS in packet transfer mode due to
a "detection of a better neighbour cell" (Cause PT2)
Trigger Condition
This counter is incremented whenever the RRM layer sends to the MS a Packet
Cell Change Order message for a NC2 cell reselection triggered due the "detection
of a better neighbour cell" (Cause PT2). The repetitions of the Packet Cell Change
Order message for a given NC2 cell reselection alarm are not counted.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
847 / 1392
24 MFS-GPRS Counters
NB_NC2_CELL_RESEL_REQ_PT3
Definition
Number of NC2 cell reselection requests for a MS in packet transfer mode due to
a "too bad downlink radio quality" (Cause PT3)
Trigger Condition
This counter is incremented whenever the RRM layer sends to the MS a Packet
Cell Change Order message for a NC2 cell reselection triggered due a "too bad
downlink radio quality" (Cause PT3). The repetitions of the Packet Cell Change
Order message for a given NC2 cell reselection alarm are not counted.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
848 / 1392
24 MFS-GPRS Counters
NB_NC2_CELL_RESEL_REQ_PT4
Definition
Number of NC2 cell reselection requests for a MS in packet transfer mode due to
a "too bad uplink radio quality" (Cause PT4)
Trigger Condition
This counter is incremented whenever the RRM layer sends to the MS a Packet
Cell Change Order message for a NC2 cell reselection triggered due a "too bad
uplink radio quality" (Cause PT4). The repetitions of the Packet Cell Change Order
message for a given NC2 cell reselection alarm are not counted.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
849 / 1392
24 MFS-GPRS Counters
NB_NC2_CELL_RESEL_SUCC_PT1
Definition
Number of NC2 cell reselection successes for a MS in packet transfer mode due
to a "too low downlink received signal" (Cause PT1)
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
850 / 1392
24 MFS-GPRS Counters
NB_NC2_CELL_RESEL_SUCC_PT2
Definition
Number of NC2 cell reselection successes for a MS in packet transfer mode due
to a "detection of a better neighbour cell" (Cause PT2)
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
851 / 1392
24 MFS-GPRS Counters
NB_NC2_CELL_RESEL_SUCC_PT3
Definition
Number of NC2 cell reselection successes for a MS in packet transfer mode due
to a "too bad downlink radio quality" (Cause PT3)
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
852 / 1392
24 MFS-GPRS Counters
NB_NC2_CELL_RESEL_SUCC_PT4
Definition
Number of NC2 cell reselection successes for a MS in packet transfer mode due
to a "too bad uplink radio quality" (Cause PT4)
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
853 / 1392
24 MFS-GPRS Counters
NB_NC2_CELL_RESEL_FAIL_REJECT_CELL
Definition
Number of NC2 cell reselection failures reported by the MS which leads to reject
the target cell for a while.
Trigger Condition
This counter is incremented upon receipt of a 3GPP TS 04.60 Packet Cell Change
Failure message with Causes "Frequency not implemented", "No response on
target cell", or "Immediate Assign Reject or Packet Access Reject on target cell".
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
854 / 1392
24 MFS-GPRS Counters
NB_NC2_CELL_RESEL_FAIL_NO_REJECT_CELL
Definition
Number of NC2 cell reselection failures reported by the MS which does not lead to
reject the target cell for a while.
Trigger Condition
This counter is incremented upon receipt of a 3GPP TS 04.60 Packet Cell Change
Failure message with Causes "On going CS connection", "MS in GMM Standby
state", or "Forced to the Standby state".
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
855 / 1392
24 MFS-GPRS Counters
NB_NC2_CELL_RESEL_FAIL_LOAD
Definition
Number of NC2 cell reselection failures reported by the MS due to load (cause :
"immediate assign reject" or "packet access reject on target cell")
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
856 / 1392
24 MFS-GPRS Counters
857 / 1392
24 MFS-GPRS Counters
24.2.4.5.2 N/A
24.2.4.5.2.1 P105c - NB_DL_TBF_EST_FAIL_GPU_CONG
Long Name
NB_DL_TBF_EST_FAIL_GPU_CONG
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
858 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_FAIL_CPU_GPU
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
859 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_FAIL_CONG_ATER
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
860 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_FAIL_CONG_ABIS
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
861 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_FAIL_TOO_MANY_TBF
Definition
Number of DL TBF establishment failures due to: - a too low number of GCH to
guarantee a minimum throughput for the DL TBF. - This may happen when the
number of TBFs is too high compared to the number of available GCHs. - or
the MAX_TBF_TRX_DL constraint. Note: This counter applies to GPRS and
EGPRS MS.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
862 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_FAIL_CONG
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
863 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_FAIL_RADIO_PB
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
864 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_FAIL_PTU_DSP_LOAD
Definition
Number of DL TBF establishment failures due to DSPs that are in CPU load /
overload state. Note: This counter applies to GPRS and EGPRS MS.
Trigger Condition
This counter is incremented each time a DL TBF establishment fails due to the
internal cause CPU_DSP_LOAD.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
865 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_TRANSFER_RESUMPTION_IN_DELAYED_REL_STATE
Definition
Trigger Condition
The counter is incremented each time a DL TBF state changes from "delayed
release" to "active". It corresponds to the TBF becoming active again after a
certain duration of delayed release state. This counter therefore provides the
number of DL TBF establishments which have been avoided by the delayed
downlink TBF release feature.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
866 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_FAIL_GB_PB
Definition
Number of DL TBF establishment failures due to the unavailability of the BVC (Gb
interface problem) associated with the cell.
Trigger Condition
Whenever the BVC associated with the cell is unavailable (which implies: cell
operational state "disabled"), the counter is incremented with the number of DL
TBF in establishment phase. All pending LLC PDUs in the MFS are discarded for
the cell.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
867 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_SUCC_MS_Idle_DRX_MPDCH
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
868 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_SUCC_MS_Transfer_UL
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
869 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_SUCC_MS_IDLE_DRX_NO_MPDCH
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
870 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_SUCC_MS_Non_DRX_MPDCH
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
871 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_SUCC_T3192
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
872 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_SUCC_MS_Non_DRX_NO_MPDCH
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
873 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_REQ_MS_IDLE_DRX_MPDCH
Definition
Trigger Condition
This counter is incremented whenever the MFS receives a DL LLC PDU for a
MS in packet idle mode and in DRX mode in case there is at least one PCCCH
established in the cell. Generally, all counters related to TBF establishment
requests only take into account the first attempt, i.e. no repetitions are counted.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
874 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_REQ_MS_Transfer_UL
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
875 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_REQ_MS_IDLE_DRX_NO_MPDCH
Definition
Trigger Condition
This counter is incremented whenever the MFS receives a DL LLC PDU for a MS
in packet idle mode and in DRX mode in case there is no PCCCH established in
the cell. Generally, all counters related to TBF establishment requests only take
into account the first attempt, i.e. no repetitions are counted.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
876 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_REQ_MS_Non_DRX_MPDCH
Definition
Trigger Condition
This counter is incremented whenever the MFS receives a DL LLC PDU for a MS
in packet idle mode and in non-DRX mode in case there is at least one PCCCH
established in the cell. Generally, all counters related to TBF establishment
requests only take into account the first attempt, i.e. no repetitions are counted.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
877 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_REQ_T3192
Definition
Trigger Condition
The counter is incremented whenever a DL LLC PDU is received while the timer
T3192n is running. Generally, all counters related to TBF establishment requests
only take into account the first attempt, i.e. no repetitions are counted.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
878 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_REQ_MS_Non_DRX_NO_MPDCH
Definition
Trigger Condition
This counter is incremented whenever the MFS receives a DL LLC PDU for a MS
in packet idle mode and in non-DRX mode in case there is no PCCCH established
in the cell. Generally, all counters related to TBF establishment requests only take
into account the first attempt, i.e. no repetitions are counted.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
879 / 1392
24 MFS-GPRS Counters
880 / 1392
24 MFS-GPRS Counters
24.2.4.6.2 T1
24.2.4.6.2.1 P403a - NB_DL_RES_REALLOC_REQ_T1
Long Name
NB_DL_RES_REALLOC_REQ_T1
Definition
Number of downlink TBFs for which the corresponding Mobile Station has at least
one of its TBFs impacted by a CS pre-emption process over the granularity period.
Resource reallocation will then be called for the TBFs of those Mobile Stations
(thanks to trigger T1).
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T1
Measured Object
Cell
External Comment
881 / 1392
24 MFS-GPRS Counters
NB_DL_RES_REALLOC_SUCC_T1
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T1
Measured Object
Cell
External Comment
882 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_REL_RADIO_PB_RES_REALLOC_T1
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T1
Measured Object
Cell
External Comment
883 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_RES_REALLOC_PREP_NOT_POSSIBLE_T1
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T1
Measured Object
Cell
External Comment
884 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_REL_EXT_REQ_RES_REALLOC_T1
Definition
Number of downlink TBFs for which the resource reallocation protocol is running
following T1 and an external TBF release request is received which forces to
stop the on-going resource reallocation (FLUSH-LL from the SGSN or GPRS
SUSPENSION REQUEST from the BSC).
Trigger Condition
The counter is incremented each time the resources of a downlink TBF are
being reallocated (ie either a PACKET DOWNLINK ASSIGNMENT or a PACKET
TIMESLOT RECONFIGURE message has been sent to the MS to reallocate its
downlink resources) and: - a FLUSH-LL is received from the SGSN, or - a GPRS
SUSPENSION REQUEST is received from the BSC for that Mobile Station before
the PACKET CONTROL ACKNOWLEDGEMENT is received.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T1
Measured Object
Cell
External Comment
885 / 1392
24 MFS-GPRS Counters
24.2.4.6.3 T2
24.2.4.6.3.1 P403b - NB_DL_RES_REALLOC_REQ_T2
Long Name
NB_DL_RES_REALLOC_REQ_T2
Definition
Number of downlink TBFs which are candidate for resource reallocation upon
concurrent uplink TBF establishment.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T2
Measured Object
Cell
External Comment
886 / 1392
24 MFS-GPRS Counters
NB_DL_RES_REALLOC_SUCC_T2
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T2
Measured Object
Cell
External Comment
887 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_REL_RADIO_PB_RES_REALLOC_T2
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T2
Measured Object
Cell
External Comment
888 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_RES_REALLOC_PREP_NOT_POSSIBLE_T2
Definition
Number of attempts for downlink TBFs which were candidate for T2 resource
reallocation upon concurrent uplink TBF establishment but for which no better
candidate allocation could be found. The downlink TBFs were therefore not
reallocated.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T2
Measured Object
Cell
External Comment
889 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_REL_EXT_REQ_RES_REALLOC_T2
Definition
Number of downlink TBFs for which the resource reallocation protocol is running
following T2 and an external TBF release request is received which forces to
stop the on-going resource reallocation (FLUSH-LL from the SGSN or GPRS
SUSPENSION REQUEST from the BSC).
Trigger Condition
The counter is incremented each time the resources of a downlink TBF are
being reallocated (ie either a PACKET DOWNLINK ASSIGNMENT or a PACKET
TIMESLOT RECONFIGURE message has been sent to the MS to reallocate its
downlink resources) and: - a FLUSH-LL is received from the SGSN, or - a GPRS
SUSPENSION REQUEST is received from the BSC for that Mobile Station before
the PACKET CONTROL ACKNOWLEDGEMENT is received.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T2
Measured Object
Cell
External Comment
890 / 1392
24 MFS-GPRS Counters
24.2.4.6.4 T3
24.2.4.6.4.1 P403c - NB_DL_RES_REALLOC_REQ_T3
Long Name
NB_DL_RES_REALLOC_REQ_T3
Definition
Number of downlink TBFs for which the corresponding Mobile Station was
candidate for resource reallocation upon T_CANDIDATE_TBF_REALLOC expiry
(due to trigger T3). Only candidate MSs for which the resource allocation algorithm
was called are taken into account.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T3
Measured Object
Cell
External Comment
891 / 1392
24 MFS-GPRS Counters
NB_DL_RES_REALLOC_SUCC_T3
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T3
Measured Object
Cell
External Comment
892 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_REL_RADIO_PB_RES_REALLOC_T3
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T3
Measured Object
Cell
External Comment
893 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_RES_REALLOC_PREP_NOT_POSSIBLE_T3
Definition
Number of periodic attempts for downlink TBFs which were candidate for resource
reallocation due to T3 but for which no better candidate allocation could be found.
The downlink TBFs were therefore not reallocated.
Trigger Condition
The counter is incremented each time a downlink TBF is candidate for resource
reallocation due to T3 but after the radio resource reallocation algorithm is run,
it is decided not to change its current allocation. As such, it corresponds to a
resource reallocation preparation failure.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T3
Measured Object
Cell
External Comment
894 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_REL_EXT_REQ_RES_REALLOC_T3
Definition
Number of downlink TBFs for which the resource reallocation protocol is running
following T3 and an external TBF release request is received which forces to
stop the on-going resource reallocation (FLUSH-LL from the SGSN or GPRS
SUSPENSION REQUEST from the BSC).
Trigger Condition
The counter is incremented each time the resources of a downlink TBF are
being reallocated (ie either a PACKET DOWNLINK ASSIGNMENT or a PACKET
TIMESLOT RECONFIGURE message has been sent to the MS to reallocate its
downlink resources) and: - a FLUSH-LL is received from the SGSN, or - a GPRS
SUSPENSION REQUEST is received from the BSC for that Mobile Station before
the PACKET CONTROL ACKNOWLEDGEMENT is received.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T3
Measured Object
Cell
External Comment
895 / 1392
24 MFS-GPRS Counters
24.2.4.6.5 T4
24.2.4.6.5.1 P403d - NB_DL_RES_REALLOC_REQ_T4
Long Name
NB_DL_RES_REALLOC_REQ_T4
Definition
Number of downlink TBFs for which the corresponding Mobile Station was
candidate for resource reallocation upon T_CANDIDATE_TBF_REALLOC expiry
(due to Trigger T4). Only candidate MSs for which the resource allocation
algorithm was called are taken into account.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T4
Measured Object
Cell
External Comment
896 / 1392
24 MFS-GPRS Counters
NB_DL_RES_REALLOC_SUCC_T4
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T4
Measured Object
Cell
External Comment
The counter can be used to compute the success rate of the reallocation execution
phase.
897 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_REL_RADIO_PB_RES_REALLOC_T4
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T4
Measured Object
Cell
External Comment
898 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_RES_REALLOC_PREP_NOT_POSSIBLE_T4
Definition
Number of periodic attempts for downlink TBFs which were candidate for T4
resource reallocation but for which no suitable candidate allocation could be found.
The downlink TBFs were therefore not re-allocated.
Trigger Condition
The counter is incremented each time a downlink TBF is candidate for resource
reallocation due to Trigger T4 but after the radio resource reallocation algorithm is
run, it is decided not to change its current allocation. As such, it corresponds to a
resource reallocation preparation failure.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T4
Measured Object
Cell
External Comment
899 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_REL_EXT_REQ_RES_REALLOC_T4
Definition
Number of downlink TBFs for which the resource reallocation protocol is running
following T4 and an external TBF release request is received which forces to stop
the on-going resource reallocation (Flush-LL from the SGSN or GPRS suspension
request from the BSC)
Trigger Condition
The counter is incremented each time the resources of a downlink TBF are
being reallocated due Trigger T4 (i.e. either a Packet Uplink Assignment or a
Packet Timeslot Reconfigure message has been sent to the MS to reallocate its
uplink resources) and: - a FLUSH-LL is received from the SGSN, or - a GPRS
Suspension Request is received from the BSC for that Mobile Station before the
Packet Control Acknowledgement message is received.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF re-allocations
Sub Domain 3
T4
Measured Object
Cell
External Comment
900 / 1392
24 MFS-GPRS Counters
24.2.4.7.2 N/A
24.2.4.7.2.1 P11 - NB_DL_TBF_REL_GB_PB_MStransDL
Long Name
NB_DL_TBF_REL_GB_PB_MStransDL
Definition
Number of DL TBF release due to the unavailability of the BVC (Gb interface
problem) associated with the cell when the MS is in packet transfer mode DL
(the DL TBF is established).
Trigger Condition
When the BVC associated with the cell is unavailable, the counter is incremented
by the number of DL TBF established on this cell. All pending LLC PDU in the
MFS are discarded.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
901 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_REL_PREEMPTradio
Definition
Number of DL TBF release due to fast preemption or due to too high number of
TBF on a TRX (according the number of GCHs that will remain on the TRX after
the CS preemption process).
Trigger Condition
Each time that upon T_PDCH pre-emption timer expiry for lack of resources
(T1 TBF reallocation failure), a DL TBF is released. Each time that there are
Nb_TBFs_To_Release_DL TBF to release. The counter is incremented by the
value of Nb_TBFs_To_Release_DL.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
902 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_REL_DL_DELAYED
Definition
Number of times a DL TBF is released because of a radio failure when the TBF
is in downlink delayed phase.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
903 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_REL_DUE_TO_RADIO_FAILURE_N3105
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
904 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_REL_DUE_TO_RADIO_FAILURE_TX_EFF
Definition
Trigger Condition
A DL TBF is released because of a radio failure. Considered radio failure is: too low TX efficiency.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
905 / 1392
24 MFS-GPRS Counters
NB_ABNORMAL_DL_TBF_REL
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
906 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_REL_STAGWINDOW
Definition
Number of DL TBF releases because the transmit window has been stagnating
for too long a time.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
907 / 1392
24 MFS-GPRS Counters
NB_RLC_DL_TBF_RELEASE_REQ_FOR_CR
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
908 / 1392
24 MFS-GPRS Counters
NB_NC2_DL_TBF_RELEASE
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
909 / 1392
24 MFS-GPRS Counters
NB_NC0_DL_TBF_RELEASE
Definition
Trigger Condition
This counter is incremented whenever a NC0 cell reselection leads to the release
of a DL TBF. The counter is then incremented for MS operating in NC0 mode
whenever one of the following events occurs: i) a Flush-LL message is received
from the SGSN and this Flush-LL message concerns a DL TBF which is still
on-going, ii) a Flush-LL message is received from the SGSN and this Flush-LL
message concerns a DL TBF which has been abnormally released in the previous
T_WAIT_FLUSH seconds.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
910 / 1392
24 MFS-GPRS Counters
24.2.4.7.2.11 P9 - NB_DL_TBF_NORM_REL
Long Name
NB_DL_TBF_NORM_REL
Definition
Trigger Condition
Whenever the DL TBF normally released by the MFS: upon receipt of the reply to
the 04.60 RLC DATA BLOCK (FBI=1, polling) sent by the MFS for the last RLC
block to send, ie 04.60 (EGPRS) PACKET DOWNLINK ACK/NACK from the
mobile, with no DL retransmision required. This counter is also incremented in
case of DL TBF release due to concurrent establisment (UL + DL) i.e when the
MS is accessing the network via a Channel Request. (crossing cases DL data
and Channel Request from the MS).
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
911 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_REL_SUSP
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
912 / 1392
24 MFS-GPRS Counters
NB_SUSP_DL_TBF_REL
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
913 / 1392
24 MFS-GPRS Counters
24.2.4.8.2 N/A
24.2.4.8.2.1 P106 - NB_TBF_EST_SUCC_GPU
Long Name
NB_TBF_EST_SUCC_GPU
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
914 / 1392
24 MFS-GPRS Counters
NB_TBF_EST_REQ_GPU
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
915 / 1392
24 MFS-GPRS Counters
24.2.4.9 DTM
24.2.4.9.1 All DTM
P500 - NB_DTM_CAPABLE_MS_CONTEXT_GPU (Section 24.2.4.9.2.1 )
P501 - NB_DTM_MS_CONTEXT_CELL (Section 24.2.4.9.2.2 )
P502 - CUMULATED_DTM_TIME (Section 24.2.4.9.2.3 )
P503 - CUMULATED_DTM_DEDICATED_TIME (Section 24.2.4.9.2.4 )
P504 - CUMULATED_DTM_PTM_TIME (Section 24.2.4.9.2.5 )
P505 - NB_DTM_DL_TBF_EST_REQ (Section 24.2.4.9.2.6 )
P506 - NB_DTM_DL_TBF_EST_SUCC (Section 24.2.4.9.2.7 )
P507 - NB_DTM_UL_TBF_EST_REQ (Section 24.2.4.9.2.8 )
P508 - NB_DTM_UL_TBF_EST_SUCC (Section 24.2.4.9.2.9 )
P509 - NB_DTM_CS_DL_TBF_RELEASE (Section 24.2.4.9.2.10 )
P510 - NB_DTM_CS_UL_TBF_RELEASE (Section 24.2.4.9.2.11 )
P511 - NB_DTM_DL_TBF_FAIL_CONG (Section 24.2.4.9.2.12 )
P512 - NB_DTM_UL_TBF_FAIL_CONG (Section 24.2.4.9.2.13 )
P513 - NB_UL_LLC_BYTES_GTTP (Section 24.2.4.9.2.14 )
P514 - NB_DL_LLC_BYTES_GTTP (Section 24.2.4.9.2.15 )
P515 - NB_RT_PFC_CREATION_DTM_DEDICATED (Section 24.2.4.9.2.16 )
P516 - NB_RT_PFC_DOWNGRADED_DTM_DEDICATED (Section
24.2.4.9.2.17 )
P518 - NB_RT_PFC_CREATION_DTM_MODE (Section 24.2.4.9.2.18 )
P519 - NB_RT_PFC_DOWNGRADED_DTM_MODE (Section 24.2.4.9.2.19 )
24.2.4.9.2 N/A
24.2.4.9.2.1 P500 - NB_DTM_CAPABLE_MS_CONTEXT_GPU
Long Name
NB_DTM_CAPABLE_MS_CONTEXT_GPU
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DTM
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
916 / 1392
24 MFS-GPRS Counters
NB_DTM_MS_CONTEXT_CELL
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DTM
Sub Domain 3
N/A
Measured Object
Cell
External Comment
917 / 1392
24 MFS-GPRS Counters
CUMULATED_DTM_TIME
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DTM
Sub Domain 3
N/A
Measured Object
Cell
External Comment
918 / 1392
24 MFS-GPRS Counters
CUMULATED_DTM_DEDICATED_TIME
Definition
Trigger Condition
The timer is the sum of all the unit times -Starting : When the indication of start
of a CS session is received (first BSCGP BSC Shared DTM Info Indication with
CS=1 received) or when , in DTM mode , PS session is , normally or abnormally
, released. -Stopping : When in dedicated mode, the first UL RLC data Blocks
are received from the MS (case of UL TBF) or the first Packet downlink Ack/Nack
message is received from the MS (case of DL TBF) or when in dedicated mode ,
an indication of stop of CS session is received (BSCGP BSC Shared DTM Info
Indication with CS=0 received) or when in dedicated mode , an indication of stop
of CS session is received. The time is provided in seconds with one significant
value after the comma (i.e. ROUND(10x) / 10).
Sub Domain 1
Radio interface
Sub Domain 2
DTM
Sub Domain 3
N/A
Measured Object
Cell
External Comment
919 / 1392
24 MFS-GPRS Counters
CUMULATED_DTM_PTM_TIME
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DTM
Sub Domain 3
N/A
Measured Object
Cell
External Comment
920 / 1392
24 MFS-GPRS Counters
NB_DTM_DL_TBF_EST_REQ
Definition
Trigger Condition
This counter is incremented when the MFS receives the first DL LLC PDU for a
MS in dedicated mode (and in GMM ready state). Note : - This counter applies
only to DTM capable mobiles. - DL LLC PDU sent with BSCGP DTM GPRS
information are not taken into account.
Sub Domain 1
Radio interface
Sub Domain 2
DTM
Sub Domain 3
N/A
Measured Object
Cell
External Comment
921 / 1392
24 MFS-GPRS Counters
NB_DTM_DL_TBF_EST_SUCC
Definition
Trigger Condition
This counter is incremented when the MFS receives the first Packet Downlink ack
(following the reception of a DL LLC PDU for a MS in dedicated mode). Note 1 :
This counter applies only to DTM capable mobiles.
Sub Domain 1
Radio interface
Sub Domain 2
DTM
Sub Domain 3
N/A
Measured Object
Cell
External Comment
922 / 1392
24 MFS-GPRS Counters
NB_DTM_UL_TBF_EST_REQ
Definition
Trigger Condition
This counter is incremented when MFS receives the BSCGP DTM Request
message.
Sub Domain 1
Radio interface
Sub Domain 2
DTM
Sub Domain 3
N/A
Measured Object
Cell
External Comment
923 / 1392
24 MFS-GPRS Counters
NB_DTM_UL_TBF_EST_SUCC
Definition
Trigger Condition
This counter is incremented when the MFS receives the first UL RLC data block
for a MS in dedicated mode. Note 1 : This counter applies only to DTM capable
mobiles.
Sub Domain 1
Radio interface
Sub Domain 2
DTM
Sub Domain 3
N/A
Measured Object
Cell
External Comment
924 / 1392
24 MFS-GPRS Counters
NB_DTM_CS_DL_TBF_RELEASE
Definition
Number of DL TBF releases due to the release of the CS connection when the
MS leaves the dual transfer mode or due to the establishment of a CS connection
when the MS enters the dual transfer mode. This counter also counts the DL
TBF release due to a handover.
Trigger Condition
This counter is incremented for DTM capable MS with ongoing DL TBF established
, when an abnormal DL TBF release, occurs : - when the DTM mode is leaved (
release of the CS connection in DTM mode). - when in DTM mode an intercell or
an intracell handover occurs. - when in PTM the dedicated mode is entered.
Sub Domain 1
Radio interface
Sub Domain 2
DTM
Sub Domain 3
N/A
Measured Object
Cell
External Comment
925 / 1392
24 MFS-GPRS Counters
NB_DTM_CS_UL_TBF_RELEASE
Definition
Number of UL TBF releases due to the release of the CS connection when the
MS leaves the dual transfer mode or due to the establishment of a CS connection
when the MS enters the dual transfer mode. This counter also counts the UL TBF
release due to an handover.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DTM
Sub Domain 3
N/A
Measured Object
Cell
External Comment
926 / 1392
24 MFS-GPRS Counters
NB_DTM_DL_TBF_FAIL_CONG
Definition
Trigger Condition
This counter is incremented when MFS has no suitable radio resources to enter in
DTM mode.
Sub Domain 1
Radio interface
Sub Domain 2
DTM
Sub Domain 3
N/A
Measured Object
Cell
External Comment
927 / 1392
24 MFS-GPRS Counters
NB_DTM_UL_TBF_FAIL_CONG
Definition
Trigger Condition
This counter is incremented when the MFS sends the BSCGP DTM reject
message in case of lack of radio resources available.
Sub Domain 1
Radio interface
Sub Domain 2
DTM
Sub Domain 3
N/A
Measured Object
Cell
External Comment
928 / 1392
24 MFS-GPRS Counters
NB_UL_LLC_BYTES_GTTP
Definition
Trigger Condition
This counter is incremented by the number of bytes of the UL LLC PDU carried in
the BSCGP DTM GPRS information messages received in MFS.
Sub Domain 1
Radio interface
Sub Domain 2
DTM
Sub Domain 3
N/A
Measured Object
Cell
External Comment
929 / 1392
24 MFS-GPRS Counters
NB_DL_LLC_BYTES_GTTP
Definition
Trigger Condition
This counter is incremented by the number of bytes of the DL LLC PDU carried
in the BSCGP DTM GPRS information messages sent by MFS. Note : Possible
repetitions of the messages are not taken into account i.e only the DL_LLC_PDU
acknowledged by BSCGP DTM GPRS information ack message are take into
account.
Sub Domain 1
Radio interface
Sub Domain 2
DTM
Sub Domain 3
N/A
Measured Object
Cell
External Comment
930 / 1392
24 MFS-GPRS Counters
NB_RT_PFC_CREATION_DTM_DEDICATED
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DTM
Sub Domain 3
N/A
Measured Object
Cell
External Comment
931 / 1392
24 MFS-GPRS Counters
NB_RT_PFC_DOWNGRADED_DTM_DEDICATED
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DTM
Sub Domain 3
N/A
Measured Object
Cell
External Comment
932 / 1392
24 MFS-GPRS Counters
NB_RT_PFC_CREATION_DTM_MODE
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DTM
Sub Domain 3
N/A
Measured Object
Cell
External Comment
933 / 1392
24 MFS-GPRS Counters
NB_RT_PFC_DOWNGRADED_DTM_MODE
Definition
Trigger Condition
For a DTM MS in DTM mode, this counter is - Incremented when MFS proposes a
Default Best Effort ABQP in response to a RT-PFC creation received in the cell.
Sub Domain 1
Radio interface
Sub Domain 2
DTM
Sub Domain 3
N/A
Measured Object
Cell
External Comment
934 / 1392
24 MFS-GPRS Counters
24.2.4.10 EDA
24.2.4.10.1 All EDA
P594 - NB_EDA_MS_CONTEXT_GPU (Section 24.2.4.10.2.1 )
P595 - CUMULATED_TIME_ACTIVE_UL_CONNECTED_TIME_EDA_MODE
(Section 24.2.4.10.2.2 )
P596 - NB_EDA_USED_UL_TBF (Section 24.2.4.10.2.3 )
P597 - NB_EDA_ALLOWED_UL_TBF (Section 24.2.4.10.2.4 )
P598 - NB_DA_EDA_REALLOC_UL_TBF (Section 24.2.4.10.2.5 )
24.2.4.10.2 N/A
24.2.4.10.2.1 P594 - NB_EDA_MS_CONTEXT_GPU
Long Name
NB_EDA_MS_CONTEXT_GPU
Definition
Trigger Condition
For a MS context, the MS Radio Access Capability indicates the support of EDA
either in GPRS mode or in EGPRS mode or in both modes. If EDA is supported in
both modes, the counter shall be incremented only by one.
Sub Domain 1
Radio interface
Sub Domain 2
EDA
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
935 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_ACTIVE_UL_CONNECTED_TIME_EDA_MODE
Definition
Trigger Condition
The counter measures the cumulated time duration of all UL TBFs connections
in active phase and operating in EDA mode , whatever the UL pdch EDA
configuration used, in the cell over the granularity period. The counter starts :
when an UL TBF in active phase and in DA mode is reallocated in EDA mode,
or when an UL TBF in EDA mode and in Extended Uplink TBF Mode wakes up
or when an UL TBF is established directly in EDA mode (in this case the start of
active phase is taken into account). The counter stops: when an UL TBF in EDA
mode goes to Extended Uplink TBF Mode, or when an UL TBF in active phase
and in EDA mode is reallocated in DA mode, or when an UL TBF in EDA mode
ends (normally or not). Note1 : This counter applies to both GPRS and EGPRS
TBFs and to both acknowledge or unacknowledge mode. Note 2 :The case the
UL TBF is released due to a NC cell reselection is managed as an abnormal UL
TBF release. The time is provided in seconds with one significant value after
the comma (i.e. ROUND(10x) / 10).
Sub Domain 1
Radio interface
Sub Domain 2
EDA
Sub Domain 3
N/A
Measured Object
Cell
External Comment
936 / 1392
24 MFS-GPRS Counters
NB_EDA_USED_UL_TBF
Definition
Number of UL TBF that have used at least one time the EDA mode during their
lifetime.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
EDA
Sub Domain 3
N/A
Measured Object
Cell
External Comment
937 / 1392
24 MFS-GPRS Counters
NB_EDA_ALLOWED_UL_TBF
Definition
Number of UL TBF belonging to mobile stations allowed using the EDA mode but
that did not necessarily use it (due to all conditions not fulfilled).
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
EDA
Sub Domain 3
N/A
Measured Object
Cell
External Comment
938 / 1392
24 MFS-GPRS Counters
NB_DA_EDA_REALLOC_UL_TBF
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
EDA
Sub Domain 3
N/A
Measured Object
Cell
External Comment
939 / 1392
24 MFS-GPRS Counters
24.2.4.11.2 N/A
24.2.4.11.2.1 P440a - NB_REROUTING_INTRA_NSE
Long Name
NB_REROUTING_INTRA_NSE
Definition
Within the granularity period, the MFS counts the number of times it receives an
order from the SGSN to reroute DL LLC PDUs to another cell belonging to the
same NSE (even if there is actually no PDU to reroute).
Trigger Condition
Receipt of a FLUSH-LL message containing the new BVCI and, if the SGSN
supports the INR option, not the new NSEI
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
940 / 1392
24 MFS-GPRS Counters
NB_REROUTING_INTER_NSE_INTRA_BSS
Definition
Within the granularity period, the MFS counts the number of times conditions are
fulfilled to reroute DL LLC PDUs to another cell belonging to another NSE but to
the same BSS (even if there is actually no PDU to reroute).
Trigger Condition
The counter is incremented in the two following cases: i) either the SGSN supports
the Inter-NSE Rerouting feature and the MFS receives a FLUSH-LL message
containing the new BVCI and the new NSEI and the new NSEI is part of the
serving BSS, ii) or the SGSN does not support the Inter-NSE Rerouting feature
and the autonomous rerouting is enabled (EN_AUTONOMOUS_REROUTING set
to enabled) and the MFS receives a FLUSH-LL message following a cell change
occuring between two NSEs within the same BSS and within the same routing
area.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
941 / 1392
24 MFS-GPRS Counters
NB_REROUTING_INTER_NSE_INTER_BSS
Definition
Within the granularity period, the MFS counts the number of times conditions are
fulfilled to reroute DL LLC PDUs to another cell belonging to another NSE and to
another BSS (even if there is actually no PDU to reroute).
Trigger Condition
The counter is incremented in the two following cases: i) either the SGSN
supports the Inter-NSE Rerouting feature and the MFS receives a FLUSH-LL
message containing the new BVCI and the new NSEI and the new NSEI is part
of a different BSS than the BSS of the source cell ii) or the SGSN does not
support the Inter-NSE Rerouting feature and the autonomous rerouting is enabled
(EN_AUTONOMOUS_REROUTING set to enabled) and the MFS receives a
FLUSH-LL message following a cell change occuring between two NSEs and
between two different BSSs , within the same routing area.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
942 / 1392
24 MFS-GPRS Counters
NB_IMPOSSIBLE_OR_UNREQUESTED_REROUTING_INR
Definition
Within the granularity period, if the SGSN supports the Inter-NSE Rerouting
feature, the MFS counts the number of times the SGSN does not request rerouting.
Trigger Condition
The counter is incremented in the following case: - the SGSN supports the
Inter-NSE Rerouting feature and the MFS receives a FLUSH-LL message not
containing the new BVCI
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
943 / 1392
24 MFS-GPRS Counters
NB_UNREQUESTED_REROUTING_NOT_INR
Definition
Within the granularity period, if the SGSN does not support the Inter-NSE Rerouting
feature and autonomous rerouting is enabled (EN_AUTONOMOUS_REROUTING
set to enabled), the MFS counts the number of times the MFS receives an order
(in the FLUSH-LL message) from the SGSN not to reroute DL LLC PDUs following
a cell change occuring within the same routing area and within the same NSE.
Trigger Condition
The counter is incremented in the following case: - the SGSN does not
support the Inter-NSE Rerouting feature and autonomous rerouting is enabled
(EN_AUTONOMOUS_REROUTING set to enabled) and the MFS receives a
FLUSH-LL message not containing the new BVCI following a cell change occuring
within the same routing area and within the same NSE.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
944 / 1392
24 MFS-GPRS Counters
NB_IMPOSSIBLE_REROUTING_NOT_INR
Definition
Within the granularity period, if the SGSN does not support the Inter-NSE Rerouting
feature and autonomous rerouting is enabled (EN_AUTONOMOUS_REROUTING
set to enabled), the MFS counts the number of times the MFS receives a
FLUSH-LL message following a cell change occuring between two different
routing areas.
Trigger Condition
The counter is incremented in the following case: the SGSN does not
support the Inter-NSE Rerouting feature and autonomous rerouting is enabled
(EN_AUTONOMOUS_REROUTING set to enabled) and the MFS receives a
FLUSH-LL message following a cell change occuring between two different
routing areas.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
945 / 1392
24 MFS-GPRS Counters
24.2.4.12 PFC
24.2.4.12.1 All PFC
P200 - NB_DOWNGRADED_MOVING_RT_PFC (Section 24.2.4.12.2.1 )
P220 - NB_MOVING_RT_PFC (Section 24.2.4.12.2.2 )
P229 - NB_RT_PFC_PREEMPTED (Section 24.2.4.12.2.3 )
P231 - NB_DOWNGRADED_RT_PFC_DEFENCE (Section 24.2.4.12.2.4 )
P232 - NB_MOVING_RT_PFC_TARGET (Section 24.2.4.12.2.5 )
P463 - NB_PFC_DOWNLOAD (Section 24.2.4.12.2.6 )
P488 - NB_RT_DL_TBF (Section 24.2.4.12.2.7 )
P489 - NB_RT_UL_TBF (Section 24.2.4.12.2.8 )
P490 - NB_UNACK_NRT_PFC_CREATION (Section 24.2.4.12.2.9 )
P491 - NB_UNACK_RT_PFC_CREATION (Section 24.2.4.12.2.10 )
P492 - NB_DOWNGRADED_RT_PFC (Section 24.2.4.12.2.11 )
P493 - NB_PFC_REJECTED (Section 24.2.4.12.2.12 )
P494 - NB_PFC_DOWNLOAD_FAIL (Section 24.2.4.12.2.13 )
P497 - NB_RT_PFC_CREATION (Section 24.2.4.12.2.14 )
P498 - NB_NRT_PFC_CREATION (Section 24.2.4.12.2.15 )
P499 - NB_RT_PFC_CREATION_OK (Section 24.2.4.12.2.16 )
24.2.4.12.2 N/A
24.2.4.12.2.1 P200 - NB_DOWNGRADED_MOVING_RT_PFC
Long Name
NB_DOWNGRADED_MOVING_RT_PFC
Definition
Trigger Condition
- Incremented, in the target cell, when PCC cannot accept a RT-PFC getting into
the cell because of lack of resource and downgrades the RT-PFC to the Default
Best Effort ABQP. -Incremented when PCC cannot accept a RT-PFC getting into
the cell because the flag EN_STREAMING in the cell is set to OFF. Note : MS in
dedicated mode or in DTM mode are not taken into account.
Sub Domain 1
Radio interface
Sub Domain 2
PFC
Sub Domain 3
N/A
Measured Object
Cell
External Comment
946 / 1392
24 MFS-GPRS Counters
NB_MOVING_RT_PFC
Definition
Trigger Condition
- Incremented, in the target cell, when a RT-PFC is forwarded from another cell
following a cell reselection.
Sub Domain 1
Radio interface
Sub Domain 2
PFC
Sub Domain 3
N/A
Measured Object
Cell
External Comment
947 / 1392
24 MFS-GPRS Counters
NB_RT_PFC_PREEMPTED
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PFC
Sub Domain 3
N/A
Measured Object
Cell
External Comment
948 / 1392
24 MFS-GPRS Counters
NB_DOWNGRADED_RT_PFC_DEFENCE
Definition
Trigger Condition
Incremented, in the current cell, when MFS downgrades a RT-PFC to the Default
Best Effort ABQP due to defense mechanism (lack of resources) during its time life.
Sub Domain 1
Radio interface
Sub Domain 2
PFC
Sub Domain 3
N/A
Measured Object
Cell
External Comment
949 / 1392
24 MFS-GPRS Counters
NB_MOVING_RT_PFC_TARGET
Definition
Number of RT-PFC that are successfully moved in another cell following a cell
reselection of the MS.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PFC
Sub Domain 3
N/A
Measured Object
Cell
External Comment
950 / 1392
24 MFS-GPRS Counters
NB_PFC_DOWNLOAD
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PFC
Sub Domain 3
N/A
Measured Object
Cell
External Comment
951 / 1392
24 MFS-GPRS Counters
NB_RT_DL_TBF
Definition
Trigger Condition
- Incremented by RRM-PCC each time a DL TBF is established in RT mode. Incremented by RRM-PCC each time an established NRT DL TBF passes to
RT mode.
Sub Domain 1
Radio interface
Sub Domain 2
PFC
Sub Domain 3
N/A
Measured Object
Cell
External Comment
952 / 1392
24 MFS-GPRS Counters
NB_RT_UL_TBF
Definition
Trigger Condition
- Incremented by RRM-PCC each time a UL TBF is established in RT mode. Incremented by RRM-PCC each time an established NRT UL TBF passes to
RT mode.
Sub Domain 1
Radio interface
Sub Domain 2
PFC
Sub Domain 3
N/A
Measured Object
Cell
External Comment
953 / 1392
24 MFS-GPRS Counters
NB_UNACK_NRT_PFC_CREATION
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PFC
Sub Domain 3
N/A
Measured Object
Cell
External Comment
954 / 1392
24 MFS-GPRS Counters
NB_UNACK_RT_PFC_CREATION
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PFC
Sub Domain 3
N/A
Measured Object
Cell
External Comment
955 / 1392
24 MFS-GPRS Counters
NB_DOWNGRADED_RT_PFC
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PFC
Sub Domain 3
N/A
Measured Object
Cell
External Comment
956 / 1392
24 MFS-GPRS Counters
NB_PFC_REJECTED
Definition
Trigger Condition
Incremented when a PFC is rejected because the received PFI is not correct, or
because it is a RT-PFC with RLC unacknowledged mode. Incremented when the
maximum number of PFC per MS is reached.
Sub Domain 1
Radio interface
Sub Domain 2
PFC
Sub Domain 3
N/A
Measured Object
Cell
External Comment
957 / 1392
24 MFS-GPRS Counters
NB_PFC_DOWNLOAD_FAIL
Definition
Number of time the BSS cannot get the PFC characteristics from SGSN
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PFC
Sub Domain 3
N/A
Measured Object
Cell
External Comment
958 / 1392
24 MFS-GPRS Counters
NB_RT_PFC_CREATION
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PFC
Sub Domain 3
N/A
Measured Object
Cell
External Comment
959 / 1392
24 MFS-GPRS Counters
NB_NRT_PFC_CREATION
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PFC
Sub Domain 3
N/A
Measured Object
Cell
External Comment
960 / 1392
24 MFS-GPRS Counters
NB_RT_PFC_CREATION_OK
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PFC
Sub Domain 3
N/A
Measured Object
Cell
External Comment
961 / 1392
24 MFS-GPRS Counters
24.2.4.13.2 N/A
24.2.4.13.2.1 P98c - NB_SUSPEND_REQ_FOR_DL_TBF
Long Name
NB_SUSPEND_REQ_FOR_DL_TBF
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Suspend / Resume
Sub Domain 3
N/A
Measured Object
Cell
External Comment
962 / 1392
24 MFS-GPRS Counters
NB_SUSPEND_REQ_FOR_UL_TBF
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Suspend / Resume
Sub Domain 3
N/A
Measured Object
Cell
External Comment
963 / 1392
24 MFS-GPRS Counters
24.2.4.14.2 N/A
24.2.4.14.2.1 P105d - NB_UL_TBF_EST_FAIL_GPU_CONG
Long Name
NB_UL_TBF_EST_FAIL_GPU_CONG
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
964 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_EST_FAIL_CPU_GPU
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
965 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_EST_FAIL_CONG_ATER
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
966 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_EST_FAIL_CONG_ABIS
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
967 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_EST_FAIL_TOO_MANY_TBF
Definition
Number of UL TBF establishment failures due to: - a too low number of GCH to
guarantee a minimum throughput for the UL TBF. - This may happen when the
number of TBFs is too high compared to the number of available GCHs. - - or
the MAX_TBF_TRX_UL constraint. Note: This counter applies to GPRS and
EGPRS MS.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
968 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_EST_FAIL_PTU_DSP_LOAD
Definition
Number of UL TBF establishment failures due to DSPs that are in CPU load /
overload state. Note: This counter applies to GPRS and EGPRS MS.
Trigger Condition
This counter is incremented each time a UL TBF establishment fails due to the
internal cause CPU_DSP_LOAD. The counter is incremented on receipt of
an (EGPRS) PACKET CHANNEL_REQUEST on (P)RACH, or on receipt of an
(EGPRS) PACKET DL ACK/NACK (with a Channel Request IE) on PACCH, or
receipt of a CHANNEL REQUEST on RACH when the UL TBF cannot be served
due to DSP CPU load / overload. Note: This counter may also be incremented
when the MS have requested a single block access on CCCH to send a 04.60
PACKET MEASUREMENT REPORT message or a 04.60 PACKET CELL
CHANGE FAILURE message.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
969 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_ENT_EXTENDED_UPLINK
Definition
Number of established UL TBF entering the extended uplink state for the first time.
Trigger Condition
Each time an active UL TBF enters for the first time the extended uplink state.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
970 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_RESUME_IN_EXTENDED_UPLINK
Definition
Trigger Condition
The counter is incremented each time a UL TBF state changes from "extended
uplink" to "active". It corresponds to the UL TBF becoming active again within
the extended uplink phase duration.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
971 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_EST_FAIL_CONG
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
972 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_EST_FAIL_RADIO_PB
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
973 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_EST_SUCC_MSidle_MastChan
Definition
Trigger Condition
This counter is incremented i) when the TLLI is received during a one phase
access UL TBF establishment triggered on PRACH, or ii) when the TBF start
indication is received during a two phase access UL TBF establishment triggered
on PRACH.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
974 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_EST_SUCC_MStransDL
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
975 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_EST_SUCC_MSidle_NO_MastChan
Definition
Trigger Condition
This counter is incremented i) when the TLLI is received during a one phase
access UL TBF establishment triggered on RACH, or ii) when the TBF start
indication is received during a two phase access UL TBF establishment triggered
on RACH.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
976 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_EST_REQ_MSidle_MastChan
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
977 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_EST_REQ_MStransDL
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
978 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_EST_REQ_MSidle_NO_MastChan
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
979 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_EST_FAIL_GB_PB
Definition
Number of UL TBF establishment failures due to the unavailability of the BVC (Gb
interface problem) associated with the cell.
Trigger Condition
Whenever the BVC associated with the cell is unavailable (which implies: cell
operational state "disabled"), the counter is incremented with the nb of UL TBF in
establishment phase.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF establishments
Sub Domain 3
N/A
Measured Object
Cell
External Comment
980 / 1392
24 MFS-GPRS Counters
981 / 1392
24 MFS-GPRS Counters
24.2.4.15.2 T1
24.2.4.15.2.1 P404a - NB_UL_RES_REALLOC_REQ_T1
Long Name
NB_UL_RES_REALLOC_REQ_T1
Definition
Number of uplink TBFs for which the corresponding Mobile Station has at least
one of its TBFs impacted by a CS pre-emption process over the granularity period.
Resource reallocation will then be called for the TBFs of those Mobile Stations
(thanks to trigger T1).
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T1
Measured Object
Cell
External Comment
982 / 1392
24 MFS-GPRS Counters
NB_UL_RES_REALLOC_SUCC_T1
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T1
Measured Object
Cell
External Comment
983 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_REL_RADIO_PB_RES_REALLOC_T1
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T1
Measured Object
Cell
External Comment
984 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_RES_REALLOC_PREP_NOT_POSSIBLE_T1
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T1
Measured Object
Cell
External Comment
985 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_REL_EXT_REQ_RES_REALLOC_T1
Definition
Number of uplink TBFs for which the resource reallocation protocol is running
following T1 and an external TBF release request is received which forces to
stop the on-going resource reallocation (FLUSH-LL from the SGSN or GPRS
SUSPENSION REQUEST from the BSC).
Trigger Condition
The counter is incremented each time the resources of an uplink TBF are
being reallocated (ie either a PACKET UPLINK ASSIGNMENT or a PACKET
TIMESLOT RECONFIGURE message has been sent to the MS to reallocate its
uplink resources) and: - a FLUSH-LL is received from the SGSN, or - a GPRS
SUSPENSION REQUEST is received from the BSC for that Mobile Station before
the PACKET CONTROL ACKNOWLEDGEMENT is received.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T1
Measured Object
Cell
External Comment
986 / 1392
24 MFS-GPRS Counters
24.2.4.15.3 T2
24.2.4.15.3.1 P404b - NB_UL_RES_REALLOC_REQ_T2
Long Name
NB_UL_RES_REALLOC_REQ_T2
Definition
Number of uplink TBFs which are candidate for resource reallocation upon
concurrent downlink TBF establishment.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T2
Measured Object
Cell
External Comment
987 / 1392
24 MFS-GPRS Counters
NB_UL_RES_REALLOC_SUCC_T2
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T2
Measured Object
Cell
External Comment
988 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_REL_RADIO_PB_RES_REALLOC_T2
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T2
Measured Object
Cell
External Comment
989 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_RES_REALLOC_PREP_NOT_POSSIBLE_T2
Definition
Number of attempts for uplink TBFs which were candidate for T2 resource
reallocation upon concurrent downlink TBF establishment but for which no
candidate allocation could be found apart from their current allocation. The uplink
TBFs were therefore not reallocated.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T2
Measured Object
Cell
External Comment
990 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_REL_EXT_REQ_RES_REALLOC_T2
Definition
Number of uplink TBFs for which the resource reallocation protocol is running
following T2 and an external TBF release request is received which forces to
stop the on-going resource reallocation (FLUSH-LL from the SGSN or GPRS
SUSPENSION REQUEST from the BSC).
Trigger Condition
The counter is incremented each time the resources of an uplink TBF are
being reallocated (ie either a PACKET UPLINK ASSIGNMENT or a PACKET
TIMESLOT RECONFIGURE message has been sent to the MS to reallocate its
uplink resources) and: - a FLUSH-LL is received from the SGSN, or - a GPRS
SUSPENSION REQUEST is received from the BSC for that Mobile Station before
the PACKET CONTROL ACKNOWLEDGEMENT is received.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T2
Measured Object
Cell
External Comment
991 / 1392
24 MFS-GPRS Counters
24.2.4.15.4 T3
24.2.4.15.4.1 P404c - NB_UL_RES_REALLOC_REQ_T3
Long Name
NB_UL_RES_REALLOC_REQ_T3
Definition
Number of uplink TBFs for which the corresponding Mobile Station was candidate
for resource reallocation upon T_CANDIDATE_TBF_REALLOC expiry (due to
trigger T3). Only candidate MSs for which the resource allocation algorithm was
called are taken into account.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T3
Measured Object
Cell
External Comment
992 / 1392
24 MFS-GPRS Counters
NB_UL_RES_REALLOC_SUCC_T3
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T3
Measured Object
Cell
External Comment
993 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_RADIO_PB_RES_REALLOC_T3
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T3
Measured Object
Cell
External Comment
994 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_RES_REALLOC_PREP_NOT_POSSIBLE_T3
Definition
Number of periodic attempts for uplink TBFs which were candidate for resource
reallocation due to T3 but for which no candidate allocation could be found apart
from their current allocation. The uplink TBFs were therefore not reallocated.
Trigger Condition
The counter is incremented each time an uplink TBF is candidate for resource
reallocation due to T3 but after the radio resource reallocation algorithm is run,
it is decided not to change its current allocation. As such, it corresponds to a
resource reallocation preparation failure.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T3
Measured Object
Cell
External Comment
995 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_REL_EXT_REQ_RES_REALLOC_T3
Definition
Number of uplink TBFs for which the resource reallocation protocol is running
following T3 and an external TBF release request is received which forces to
stop the on-going resource reallocation (FLUSH-LL from the SGSN or GPRS
SUSPENSION REQUEST from the BSC).
Trigger Condition
The counter is incremented each time the resources of an uplink TBF are
being reallocated (ie either a PACKET UPLINK ASSIGNMENT or a PACKET
TIMESLOT RECONFIGURE message has been sent to the MS to reallocate its
uplink resources) and: - a FLUSH-LL is received from the SGSN, or - a GPRS
SUSPENSION REQUEST is received from the BSC for that Mobile Station before
the PACKET CONTROL ACKNOWLEDGEMENT is received.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T3
Measured Object
Cell
External Comment
996 / 1392
24 MFS-GPRS Counters
24.2.4.15.5 T4
24.2.4.15.5.1 P404d - NB_UL_RES_REALLOC_REQ_T4
Long Name
NB_UL_RES_REALLOC_REQ_T4
Definition
Number of uplink TBFs for which the corresponding Mobile Station was candidate
for resource reallocation upon T_CANDIDATE_TBF_REALLOC expiry (due to
Trigger T4). Only candidate MSs for which the resource allocation algorithm was
called are taken into account.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T4
Measured Object
Cell
External Comment
997 / 1392
24 MFS-GPRS Counters
NB_UL_RES_REALLOC_SUCC_T4
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T4
Measured Object
Cell
External Comment
The counter can be used to compute the success rate of the reallocation execution
phase.
998 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_RADIO_PB_RES_REALLOC_T4
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T4
Measured Object
Cell
External Comment
999 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_RES_REALLOC_PREP_NOT_POSSIBLE_T4
Definition
Number of periodic attempts for uplink TBFs which were candidate for T4 resource
reallocation but for which no suitable candidate allocation could be found apart
from their current allocation. The uplink TBFs were therefore not re-allocated.
Trigger Condition
The counter is incremented each time an uplink TBF is candidate for resource
reallocation due to Trigger T4 but after the radio resource reallocation algorithm is
run, it is decided not to change its current allocation. As such, it corresponds to a
resource reallocation preparation failure.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T4
Measured Object
Cell
External Comment
1000 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_REL_EXT_REQ_RES_REALLOC_T4
Definition
Number of uplink TBFs for which the resource reallocation protocol is running
following T4 and an external TBF release request is received which forces to stop
the on-going resource reallocation (Flush-LL from the SGSN or GPRS suspension
request from the BSC).
Trigger Condition
The counter is incremented each time the resources of an uplink TBF are
being reallocated due Trigger T4 (i.e. either a Packet Uplink Assignment or a
Packet Timeslot Reconfigure message has been sent to the MS to reallocate its
uplink resources) and: - a FLUSH-LL is received from the SGSN, or - a GPRS
Suspension Request is received from the BSC for that Mobile Station before the
Packet Control Acknowledgement message is received.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF re-allocations
Sub Domain 3
T4
Measured Object
Cell
External Comment
1001 / 1392
24 MFS-GPRS Counters
24.2.4.16.2 N/A
24.2.4.16.2.1 P147 - NB_UL_TBF_REL_PREEMPTradio
Long Name
NB_UL_TBF_REL_PREEMPTradio
Definition
Number of UL TBF release due to fast preemption or due to too high number of
TBF on a TRX (according the number of GCHs that will remain on the TRX after
the CS preemption process).
Trigger Condition
Each time that upon T_PDCH_pre-emption timer expiry for lack of resources
(T1 TBF reallocation failure), an UL TBF is released. Each time that there are
Nb_TBFs_To_Release_UL TBF to release. The counter is incremented by the
value of Nb_TBFs_To_Release_UL.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1002 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_REL_EXTENDED_UL
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1003 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_NORM_REL
Definition
Trigger Condition
Whenever the UL TBF is normally released by the MS: upon the receipt of the
reply to the 04.60 PACKET ACK/NACK (FINAL, polling) sent by the MFS on the
last received RLC block, with no UL retransmission required.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1004 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_REL_GB_PB_MStransUL
Definition
Number of UL TBF release due to the unavailability of the BVC (Gb interface
problem) associated with the cell when the MS is in packet transfer mode UL
(the UL TBF is established).
Trigger Condition
When the BVC associated with the cell is unavailable, the counter is incremented
by the number of UL TBF established in this cell.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1005 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_REL_DUE_TO_RADIO_FAILURE_N3101
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1006 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_REL_DUE_TO_RADIO_FAILURE_N3103
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1007 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_REL_DUE_TO_RADIO_FAILURE_TX_EFF
Definition
Trigger Condition
A UL TBF is released because of a radio failure. Considered radio failure is: Too low TX efficiency.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1008 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_REL_DUE_TO_RADIO_FAILURE_N_POLLING_EUTM
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1009 / 1392
24 MFS-GPRS Counters
NB_ABNORMAL_UL_TBF_REL
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1010 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_REL_STAGWINDOW
Definition
Number of UL TBF releases because the receive window has been stagnating
for too long a time.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1011 / 1392
24 MFS-GPRS Counters
NB_RLC_UL_TBF_RELEASE_REQ_FOR_CR
Definition
Number of uplink TBF releases requested by RRM to RLC upon receipt of the
Flush message.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1012 / 1392
24 MFS-GPRS Counters
NB_NC2_UL_TBF_RELEASE
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1013 / 1392
24 MFS-GPRS Counters
NB_NC0_UL_TBF_RELEASE
Definition
Trigger Condition
This counter is incremented whenever a NC0 cell reselection leads to the release
of an UL TBF. The counter is then incremented for MS operating in NC0 mode
whenever one of the following events occurs: i) a Flush-LL message is received
from the SGSN and this Flush-LL message concerns an UL TBF which is still
on-going, ii) a Flush-LL message is received from the SGSN and this Flush-LL
message concerns an UL TBF which has been abnormally released in the
previous T_WAIT_FLUSH seconds.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1014 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_REL_SUSP
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1015 / 1392
24 MFS-GPRS Counters
NB_SUSP_UL_TBF_REL
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF releases
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1016 / 1392
24 MFS-GPRS Counters
1017 / 1392
24 MFS-GPRS Counters
1018 / 1392
24 MFS-GPRS Counters
1019 / 1392
24 MFS-GPRS Counters
1020 / 1392
24 MFS-GPRS Counters
1021 / 1392
24 MFS-GPRS Counters
24.3.2.2 GCH
24.3.2.2.1 All GCH
P465 - MAX_NB_USED_EXTRA_BONUS_ABIS_NIBBLES (Section
24.3.2.2.2.1 )
P466 - CUMULATED_TIME_USED_EXTRA_BONUS_ABIS_NIBBLES
(Section 24.3.2.2.2.2 )
P472 - CUMULATED_TIME_FREE_EXTRA_BONUS_ABIS_NIBBLES (Section
24.3.2.2.2.3 )
1022 / 1392
24 MFS-GPRS Counters
24.3.2.2.2 N/A
24.3.2.2.2.1 P465 - MAX_NB_USED_EXTRA_BONUS_ABIS_NIBBLES
Long Name
MAX_NB_USED_EXTRA_BONUS_ABIS_NIBBLES
Definition
Maximum number of extra and bonus Abis nibbles currently used in the cell (by
a GCH channel).
Trigger Condition
An internal counter tracks the current number of extra and bonus Abis nibbles used
in the cell. An Abis nibble is said used when it is either reserved for establishment
or used by a GCH. Whenever this internal counter is incremented, its new value is
compared with the stored maximum number of extra and bonus nibbles in the cell.
If this value is higher than the stored maximum value, the value becomes the new
maximum. In the particular case of a cell shared over two BTSs, the number is
computed in the BTS sector which contains the PS-capable TRXs of the cell.
Sub Domain 1
Abis interface
Sub Domain 2
GCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1023 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_USED_EXTRA_BONUS_ABIS_NIBBLES
Definition
Cumulated time during which extra and bonus Abis nibbles are used in the cell,
cumulated over all extra and bonus Abis nibbles.
Trigger Condition
The counter cumulates over the reporting period the time during which an extra or
a bonus Abis nibble is used in the cell. An Abis nibble is said used when it is either
reserved for establishment or used by a GCH. The time is provided in seconds
with one significant value after the comma (i.e. ROUND(10x) / 10).
Sub Domain 1
Abis interface
Sub Domain 2
GCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1024 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_FREE_EXTRA_BONUS_ABIS_NIBBLES
Definition
Cumulative time (in seconds), per BTS ,during which there are free extra and
bonus Abis nibbles available. Free extra and bonus nibbles are extra and bonus
nibbles not currently used in a GCH Notes: 1) This only concerns Evolium BTS.
Trigger Condition
Within the Granularity period, the number of free extra and bonus Abis nibbles is
observed . For each free bonus or extra Abis nibble, the counter cumulates over
the reporting period the time during which this nibble is free. An Abis nibble is said
free when it is neither reserved for establishment nor used by a GCH.
Sub Domain 1
Abis interface
Sub Domain 2
GCH
Sub Domain 3
N/A
Measured Object
BTS
External Comment
1025 / 1392
24 MFS-GPRS Counters
MIN_NB_FREE_EXTRA_BONUS_ABIS_NIBBLE
Definition
Minimum number of free extra and bonus Abis nibbles. Free extra and bonus
nibbles are extra and bonus nibbles not currently used in a GCH.
Trigger Condition
This counter gives the lowest value (not null) of the number of free extra and bonus
Abis nibbles among all the values of free extra and bonus Abis nibbles obtained
over the granularity period. An Abis nibble is said free when it is neither reserved
for establishment nor used by a GCH. At the beginning of each granularity period,
the counter is initialized with the number of extra and bonus abis nibbles granted
to the MFS for the concerned BTS.
Sub Domain 1
Abis interface
Sub Domain 2
GCH
Sub Domain 3
N/A
Measured Object
BTS
External Comment
1026 / 1392
24 MFS-GPRS Counters
24.3.3.2 GCH
24.3.3.2.1 All GCH
P100c - CUMULATED_TIME_BUSY_GCH_CELL (Section 24.3.3.2.2.1 )
P100d - MAX_NB_BUSY_GCH_CELL (Section 24.3.3.2.2.2 )
P100e - MIN_NB_BUSY_GCH_CELL (Section 24.3.3.2.2.3 )
P100f - MAX_NB_GCH_BUSY_GPU (Section 24.3.3.2.2.4 )
P101 - CUMULATED_TIME_AVAIL_GCH_GPU (Section 24.3.3.2.2.5 )
P383a - TIME_ATERMUX_CONG (Section 24.3.3.2.2.6 )
P383b - TIME_HIGH_ATER_USAGE (Section 24.3.3.2.2.7 )
P469 - MAX_NB_DEFICIT_GCH (Section 24.3.3.2.2.8 )
P470 - CUMULATED_TIME_DEFICIT_GCH (Section 24.3.3.2.2.9 )
P471 - CUMULATED_TIME_EXCESS_GCH (Section 24.3.3.2.2.10 )
P474 - CUMULATED_TIME_FREE_ATER_NIBBLES (Section 24.3.3.2.2.11 )
P486 - MIN_NB_FREE_ATER_NIBBLE (Section 24.3.3.2.2.12 )
1027 / 1392
24 MFS-GPRS Counters
24.3.3.2.2 N/A
24.3.3.2.2.1 P100c - CUMULATED_TIME_BUSY_GCH_CELL
Long Name
CUMULATED_TIME_BUSY_GCH_CELL
Definition
Cumulative time (in seconds) during which a GCH (16k channel) is busy in the cell.
The counter is integrated over all the GCH available in the cell. For a DRFU BTS,
a GCH is said busy when it is connected to a given PDCH. For an Evolium BTS, a
GCH is said busy when it is connected to a given TRX (as part as an M-EGCH).
Trigger Condition
The counter cumulates over the reporting period the time during which a
GCH is busy in the cell. For a given GCH, the counter starts when the
associated Ater nibble becomes busy and stops on the sending of BSCGP
ABIS-NIBBLES-ALLOCATION message indicating the GCH deallocation. An Ater
nibble is said busy when it is either reserved for establishment or used by a GCH.
The transmission resources connected to carry master PDCHs are included in
this counter.
Sub Domain 1
Ater interface
Sub Domain 2
GCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1028 / 1392
24 MFS-GPRS Counters
MAX_NB_BUSY_GCH_CELL
Definition
Maximum number of busy GCH (16k channel) in the cell. For a DRFU BTS, a
GCH is said busy when it is connected to a given PDCH. For an Evolium BTS, a
GCH is said busy when it is connected to a given TRX (as part as an M-EGCH).
Trigger Condition
An internal counter tracks the current number of busy GCH in the cell. This internal
counter is incremented when the associated Ater nibble of a GCH becomes busy
or decremented on sending of a BSCGP ABIS-NIBBLES-ALLOCATION message
indicating the GCH deallocation. An Ater nibble is said busy when it is either
reserved for establishment or used by a GCH. Whenever this internal counter is
incremented, its new value is compared with the stored maximum number of
busy GCH in the cell. If this value is higher than the stored maximum value, the
value becomes the new maximum. At the begining of each granularity period , the
counter is initialized with the current number of busy GCH.
Sub Domain 1
Ater interface
Sub Domain 2
GCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
This counter shall be aggregated by NPA at cell level. It is the equivalent of P100b
(B8) at cell level.
1029 / 1392
24 MFS-GPRS Counters
MIN_NB_BUSY_GCH_CELL
Definition
Minimum number of busy GCH (16k channel) in the GPU. For a DRFU BTS, a
GCH is said busy when it is connected to a given PDCH. For an Evolium BTS, a
GCH is said busy when it is connected to a given TRX (as part as an M-EGCH).
Trigger Condition
An internal counter tracks the current number of busy GCH in the cell. This internal
counter is incremented when the associated Ater nibble of a GCH becomes busy
or decremented on sending of a BSCGP ABIS-NIBBLES-ALLOCATION message
indicating the GCH deallocation. An Ater nibble is said busy when it is either
reserved for establishment or used by a GCH. Whenever this internal counter is
incremented, its new value is compared with the stored minimum number of busy
GCH in the cell. If this value is lower than the stored minimum value, the value
becomes the new minimum. At the begining of each granularity period , the
counter is initialised with the current number of busy GCH.
Sub Domain 1
Ater interface
Sub Domain 2
GCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1030 / 1392
24 MFS-GPRS Counters
MAX_NB_GCH_BUSY_GPU
Definition
Maximum number of busy GCH (16k channel) in the GPU. For a DRFU BTS, a
GCH is said busy when it is connected to a given PDCH. For an Evolium BTS, a
GCH is said busy when it is connected to a given TRX (as part as an M-EGCH).
Trigger Condition
An internal counter tracks the current number of busy GCH in the GPU. This
internal counter is incremented when the associated Ater nibble of a GCH becomes
busy or decremented on sending of a BSCGP ABIS-NIBBLES-ALLOCATION
message indicating the GCH deallocation. An Ater nibble is said busy when it
is either reserved for establishment or used by a GCH. Whenever this internal
counter is incremented, its new value is compared with the stored maximum
number of busy GCH in the GPU. If this value is higher than the stored maximum
value, the value becomes the new maximum. At the begining of each granularity
period , the counter is initialized with the current number of busy GCH.
Sub Domain 1
Ater interface
Sub Domain 2
GCH
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1031 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_AVAIL_GCH_GPU
Definition
Cumulative time (in seconds) during which a GCH resource (16k channel) is
available in the GPU. The counter is integrated over all the GCH resources
configured in the GPU. Notes: 1) The term "available" refers to the operational
state of the GCH resource. A GCH resource is available if it is able to carry
PS traffic. A GCH resource is unavailable if it is not able to carry PS traffic, for
instance further to a PCM alarm or BSC indicates a GCH not-available. 2) A
GCH corresponds here to an Ater nibble.
Trigger Condition
The counter cumulates over the reporting period and over all the GCH resources
defined in the GPU the time during which a GCH resource is available in the
GPU. For a given GCH resource, the counter starts when the resource becomes
available and stops when the resource becomes unavailable.
Sub Domain 1
Ater interface
Sub Domain 2
GCH
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1032 / 1392
24 MFS-GPRS Counters
TIME_ATERMUX_CONG
Definition
Atermux congestion duration (in seconds) due to a lack of Ater nibbles on the
Atermux interface.
Trigger Condition
The counter is: - Started: when a GPU enters the Atermux congestion
state (i.e. when the number of free Ater TS on the GPU is strictly less than
N_ATER_TS_MARGIN_GPU), - Stopped: when a GPU leaves the Atermux
congestion state (i.e. when there is at least N_ATER_TS_MARGIN_GPU free
Ater TS on the GPU).
Sub Domain 1
Ater interface
Sub Domain 2
GCH
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1033 / 1392
24 MFS-GPRS Counters
TIME_HIGH_ATER_USAGE
Definition
Time (cumulated over a granularity period) during which the GPU remains in
"high" Ater usage
Trigger Condition
- started: when the percentage of used Ater nibbles, in the GPU, reaches
Ater_Usage_Threshold - stopped: when the percentage of used Ater nibbles, in
the GPU, drops below Ater_Usage_Threshold
Sub Domain 1
Ater interface
Sub Domain 2
GCH
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1034 / 1392
24 MFS-GPRS Counters
MAX_NB_DEFICIT_GCH
Definition
Trigger Condition
This counter gives the greatest value of the number of GCH in deficit among
all the values of GCH in deficit obtained over the granularity period. 1) For
Evolium BTS: value = greatest value of the (Max(0,sum over all TRX in the
cell of Average_Target_Nb_GCH - Current_Nb_GCH)) values encountered
in the granularity period. Average_Target_Nb_GCH shall be computed
like Target_Nb_GCH but by replacing: - Nb_GCH(MAX_GPRS_CS) by
Nb_GCH(R_AVERAGE_GPRS)" - and Nb_GCH(MAX_EGPRS_MCS) by
Nb_GCH(R_AVERAGE_EGPRS). The computing of Average_Target_Nb_GCH
will only differ from the one of Target_Nb_GCH for the long data" MS transfers.
To simplify, it is considered that all the GCHs established for the short data MS
transfers on a TRX are necessary. Hence, for the short data MS transfers,
the computing of Average_Target_Nb_GCH will be similar to the one of
Target_Nb_GCH (Nb_GCH(MAX_(E)GPRS_(M)CS_SHORT_DATA) shall not
be replaced by Nb_GCH(R_AVERAGE_(E)GPRS) in the formulas). Note:
Nb_GCH(R_AVERAGE_(E)GPRS) shall be computed in incremental steps: - if
R_AVERAGE_EGPRS is < 11,2 kbps, then Nb_GCH(R_AVERAGE_EGPRS) =
Nb_GCH(MCS-1) as defined in RRM-PRH, - if R_AVERAGE_EGPRS is in the
range [11,2;14,8[ kbps, then Nb_GCH(R_AVERAGE_EGPRS) = Nb_GCH(MCS-2)
as defined in RRM-PRH, - if R_AVERAGE_EGPRS is in the range [44,8;54,4[
kbps, then Nb_GCH(R_AVERAGE_EGPRS) = Nb_GCH(MCS-7) as defined
in RRM-PRH, - if R_AVERAGE_EGPRS is in the range [54,4;59,2[ kbps, then
Nb_GCH(R_AVERAGE_EGPRS) = Nb_GCH(MCS-8) as defined in RRM-PRH, - if
R_AVERAGE_EGPRS is >= 59,2 kbps, then Nb_GCH(R_AVERAGE_EGPRS) =
Nb_GCH(MCS-9) as defined in RRM-PRH. 2) For DRFU BTS: value = 0
Sub Domain 1
Ater interface
Sub Domain 2
GCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1035 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_DEFICIT_GCH
Definition
Cumulative time (in seconds), per cell , during which there is a deficit of GCH
resources (16k channel). Note : GCH resources cover the established and the
reserved GCH.
Trigger Condition
The counter cumulates over the Granularity period and over all TRX of the cell
the time during which the GCH resources are in deficit. Deficit is computed as
follow : 1) For Evolium BTS: Deficit value = Max(0,sum over all TRX in the cell of
Average_Target_Nb_GCH - Current_Nb_GCH). Average_Target_Nb_GCH shall
be computed like Target_Nb_GCH but by replacing: - Nb_GCH(MAX_GPRS_CS)
by Nb_GCH(R_AVERAGE_GPRS)" - and Nb_GCH(MAX_EGPRS_MCS) by
Nb_GCH(R_AVERAGE_EGPRS). The computing of Average_Target_Nb_GCH
will only differ from the one of Target_Nb_GCH for the long data MS transfers.
To simplify, it is considered that all the GCHs established for the short data MS
transfers on a TRX are necessary. Hence, for the short data MS transfers,
the computing of Average_Target_Nb_GCH will be similar to the one of
Target_Nb_GCH (Nb_GCH(MAX_(E)GPRS_(M)CS_SHORT_DATA) shall not
be replaced by Nb_GCH(R_AVERAGE_(E)GPRS) in the formulas). Note:
Nb_GCH(R_AVERAGE_(E)GPRS) shall be computed in incremental steps: - if
R_AVERAGE_EGPRS is < 11,2 kbps, then Nb_GCH(R_AVERAGE_EGPRS) =
Nb_GCH(MCS-1) as defined in RRM-PRH, - if R_AVERAGE_EGPRS is in the
range [11,2;14,8[ kbps, then Nb_GCH(R_AVERAGE_EGPRS) = Nb_GCH(MCS-2)
as defined in RRM-PRH, - if R_AVERAGE_EGPRS is in the range [44,8;54,4[
kbps, then Nb_GCH(R_AVERAGE_EGPRS) = Nb_GCH(MCS-7) as defined
in RRM-PRH, - if R_AVERAGE_EGPRS is in the range [54,4;59,2[ kbps, then
Nb_GCH(R_AVERAGE_EGPRS) = Nb_GCH(MCS-8) as defined in RRM-PRH, - if
R_AVERAGE_EGPRS is >= 59,2 kbps, then Nb_GCH(R_AVERAGE_EGPRS)
= Nb_GCH(MCS-9) as defined in RRM-PRH. 2) For DRFU BTS: Deficit value =
0 Within the Granularity period, the deficit of GCH is observed. At each change
of value of the deficit (increase or decrease) the previous value of the deficit is
multiplied its time duration and summed with the cumulated time.
Sub Domain 1
Ater interface
Sub Domain 2
GCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1036 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_EXCESS_GCH
Definition
Cumulative time (in seconds), per cell ,during which there is a excess of GCH
resources (16k channel). Note : GCH resources cover the established and the
reserved GCH.
Trigger Condition
The counter cumulates over the Granularity period and over all TRX of the cell
the time during which the GCH resources are in excess . Excess is computed as
follow : 1) For Evolium BTS: Excess value = Max(0,sum over all TRX in the cell of
Current_Nb_GCH - Average_Target_Nb_GCH). Average_Target_Nb_GCH shall
be computed like Target_Nb_GCH but by replacing: - Nb_GCH(MAX_GPRS_CS)"
by Nb_GCH(R_AVERAGE_GPRS)" - and Nb_GCH(MAX_EGPRS_MCS)" by
Nb_GCH(R_AVERAGE_EGPRS). The computing of Average_Target_Nb_GCH
will only differ from the one of Target_Nb_GCH for the long data MS transfers.
To simplify, it is considered that all the GCHs established for the short data MS
transfers on a TRX are necessary. Hence, for the short data MS transfers,
the computing of Average_Target_Nb_GCH will be similar to the one of
Target_Nb_GCH ("Nb_GCH(MAX_(E)GPRS_(M)CS_SHORT_DATA) shall not
be replaced by Nb_GCH(R_AVERAGE_(E)GPRS) in the formulas). Note:
Nb_GCH(R_AVERAGE_(E)GPRS) shall be computed in incremental steps: - if
R_AVERAGE_EGPRS is < 11,2 kbps, then Nb_GCH(R_AVERAGE_EGPRS) =
Nb_GCH(MCS-1) as defined in RRM-PRH, - if R_AVERAGE_EGPRS is in the
range [11,2;14,8[ kbps, then Nb_GCH(R_AVERAGE_EGPRS) = Nb_GCH(MCS-2)
as defined in RRM-PRH, - if R_AVERAGE_EGPRS is in the range [44,8;54,4[
kbps, then Nb_GCH(R_AVERAGE_EGPRS) = Nb_GCH(MCS-7) as defined
in RRM-PRH, - if R_AVERAGE_EGPRS is in the range [54,4;59,2[ kbps, then
Nb_GCH(R_AVERAGE_EGPRS) = Nb_GCH(MCS-8) as defined in RRM-PRH, - if
R_AVERAGE_EGPRS is >= 59,2 kbps, then Nb_GCH(R_AVERAGE_EGPRS) =
Nb_GCH(MCS-9) as defined in RRM-PRH. 2) For DRFU BTS: Excess value = 0
(all the established PDCHs are needed in a DRFU BTS , as there is no M-EGCH
statistical Multiplexing). In this case , the counter value can be considered as non
significant. Within the Granularity period, the excess of GCH is observed. At
each change of value of the excess (increase or decrease) the previous value of
the deficit is multiplied its time duration and summed with the cumulated time.
The time is provided in seconds with one significant value after the comma (i.e.
ROUND(10x) / 10).
Sub Domain 1
Ater interface
Sub Domain 2
GCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1037 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_FREE_ATER_NIBBLES
Definition
Cumulative time (in seconds), per GPU ,during which there are free Ater nibbles.
A free Ater nibble is an Ater nibble which is neither reserved for establishment
nor currently used by a GCH.
Trigger Condition
This counter can be computed by the difference between the counter P101 and
the sum over all the cells of P100c.
Sub Domain 1
Ater interface
Sub Domain 2
GCH
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1038 / 1392
24 MFS-GPRS Counters
MIN_NB_FREE_ATER_NIBBLE
Definition
Minimum number of free Ater nibbles. A free Ater nibble is an Ater nibble which is
neither reserved for establishment nor currently used by a GCH.
Trigger Condition
This counter gives the lowest value (not null) of the number of free Ater nibbles
among all the values of free Ater nibbles obtained over the granularity period. At
the beginning of each granularity period, the counter is initialized with the current
number of free Ater nibbles.
Sub Domain 1
Ater interface
Sub Domain 2
GCH
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1039 / 1392
24 MFS-GPRS Counters
24.3.3.3 LapD
24.3.3.3.1 All LapD
P32 - TIME_LAPD_NOT_AVAIL (Section 24.3.3.3.2.1 )
24.3.3.3.2 N/A
24.3.3.3.2.1 P32 - TIME_LAPD_NOT_AVAIL
Long Name
TIME_LAPD_NOT_AVAIL
Definition
Trigger Condition
The time starts whenever the LapD operational state is "disabled" or the
administrative state "locked", and stops whenever the LapD operational state is
"enabled" and the administrative state "unlocked". The time is provided in seconds
with one significant value after the comma (ie ROUND(10x) / 10).
Sub Domain 1
Ater interface
Sub Domain 2
LapD
Sub Domain 3
N/A
Measured Object
LapD
External Comment
1040 / 1392
24 MFS-GPRS Counters
24.3.4 Gb interface
24.3.4.1 All Gb interface
P33 - TIME_BEAR_CHAN_NOT_AVAIL (Section 24.3.4.2.2.1 )
P34 - TIME_PVC_NOT_AVAIL (Section 24.3.4.4.2.1 )
P34a - TIME_SGSN_IP_ENDPOINT_NOT_AVAIL_GBIP (Section 24.3.4.5.2.1 )
P4 - TIME_PVC_CONG_FRAME_RELAY (Section 24.3.4.4.2.2 )
P5 - TIME_PVC_CONG_LEVEL1 (Section 24.3.4.4.2.3 )
P67 - TIME_BVC_NOT_AVAIL (Section 24.3.4.3.2.1 )
24.3.4.2.2 N/A
24.3.4.2.2.1 P33 - TIME_BEAR_CHAN_NOT_AVAIL
Long Name
TIME_BEAR_CHAN_NOT_AVAIL
Definition
Trigger Condition
The time starts whenever the Bearer Channel operational state is "disabled" (LM
link integrity procedure failure as described in Q933 annex A), and stops whenever
the Bearer Channel operational state is "enabled" (LM link integrity procedure
recovery). The time is provided in seconds with one significant value after the
comma (ie ROUND(10x) / 10).
Sub Domain 1
Gb interface
Sub Domain 2
Bearer Channel
Sub Domain 3
N/A
Measured Object
Bearer Channel
External Comment
1041 / 1392
24 MFS-GPRS Counters
24.3.4.3.2 N/A
24.3.4.3.2.1 P67 - TIME_BVC_NOT_AVAIL
Long Name
TIME_BVC_NOT_AVAIL
Definition
Time during which the BVC (associated with one cell) is not available.
Trigger Condition
The time starts whenever the PTP BVC status is NOT "Operational, started", and
stops whenever the PTP BVC status is "Operational, started". The time is provided
in seconds with one significant value after the comma (i.e. ROUND(10x) / 10).
Sub Domain 1
Gb interface
Sub Domain 2
BVC (Cell)
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1042 / 1392
24 MFS-GPRS Counters
24.3.4.4 PVC
24.3.4.4.1 All PVC
P34 - TIME_PVC_NOT_AVAIL (Section 24.3.4.4.2.1 )
P4 - TIME_PVC_CONG_FRAME_RELAY (Section 24.3.4.4.2.2 )
P5 - TIME_PVC_CONG_LEVEL1 (Section 24.3.4.4.2.3 )
24.3.4.4.2 N/A
24.3.4.4.2.1 P34 - TIME_PVC_NOT_AVAIL
Long Name
TIME_PVC_NOT_AVAIL
Definition
Trigger Condition
The time starts whenever the PVC operational state is "disabled", and stops
whenever the PVC operational state is "enabled". The time is provided in seconds
with one significant value after the comma (ie ROUND(10x) / 10).
Sub Domain 1
Gb interface
Sub Domain 2
PVC
Sub Domain 3
N/A
Measured Object
PVC
External Comment
1043 / 1392
24 MFS-GPRS Counters
24.3.4.4.2.2 P4 - TIME_PVC_CONG_FRAME_RELAY
Long Name
TIME_PVC_CONG_FRAME_RELAY
Definition
Time during which the PVC is congested in uplink because of Frame Relay
network.
Trigger Condition
The time starts whenever S consecutive frames are received from the Frame
Relay with the BECN bit set while the PVC is not already in congestion state.
The MFS stops the transmission towards the SGSN on this PVC during a fixed
delay, after which the time is stopped. The time is provided in seconds with one
significant value after the comma (ie ROUND(10x) / 10).
Sub Domain 1
Gb interface
Sub Domain 2
PVC
Sub Domain 3
N/A
Measured Object
PVC
External Comment
1044 / 1392
24 MFS-GPRS Counters
24.3.4.4.2.3 P5 - TIME_PVC_CONG_LEVEL1
Long Name
TIME_PVC_CONG_LEVEL1
Definition
Time during which the PVC is congested at level1 in uplink. The PVC congestion
is managed by an hysteresis mechanism with two thresholds. The PVC enters the
congestion-level1 state whenever its occupation queue exceeds PVC-LEVEL1-UP
while the PVC was not congested. The PVC exits the congestion-level1 state
whenever its occupation queue is smaller than PVC-LEVEL1-DOWN.
Trigger Condition
The time starts whenever the PVC enters the congestion-level1 state, and stops
whenever the PVC exits this state. The time is provided in seconds with one
significant value after the comma (ie ROUND(10x) / 10).
Sub Domain 1
Gb interface
Sub Domain 2
PVC
Sub Domain 3
N/A
Measured Object
PVC
External Comment
1045 / 1392
24 MFS-GPRS Counters
24.3.4.5 SGSN_IP_NSVC
24.3.4.5.1 All SGSN_IP_NSVC
P34a - TIME_SGSN_IP_ENDPOINT_NOT_AVAIL_GBIP (Section 24.3.4.5.2.1 )
24.3.4.5.2 N/A
24.3.4.5.2.1 P34a - TIME_SGSN_IP_ENDPOINT_NOT_AVAIL_GBIP
Long Name
TIME_SGSN_IP_ENDPOINT_NOT_AVAIL_GBIP
Definition
Trigger Condition
The time starts whenever the SGSN IP endpoint operational state is "disabled",
and stops whenever the SGSN IP endpoint operational state is "enabled".
Sub Domain 1
Gb interface
Sub Domain 2
SGSN_IP_NSVC
Sub Domain 3
N/A
Measured Object
SGSN_IP_NSVC
External Comment
1046 / 1392
24 MFS-GPRS Counters
1047 / 1392
24 MFS-GPRS Counters
1048 / 1392
24 MFS-GPRS Counters
1049 / 1392
24 MFS-GPRS Counters
1050 / 1392
24 MFS-GPRS Counters
1051 / 1392
24 MFS-GPRS Counters
1052 / 1392
24 MFS-GPRS Counters
24.3.5.2.2 N/A
24.3.5.2.2.1 P531b_1 - DISTRIB_DL_EGPRS_LLC_THROUGHPUT_CLASS_1
Long Name
DISTRIB_DL_EGPRS_LLC_THROUGHPUT_CLASS_1
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
EGPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1053 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_EGPRS_LLC_THROUGHPUT_CLASS_10
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
EGPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1054 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_EGPRS_LLC_THROUGHPUT_CLASS_11
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
EGPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1055 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_EGPRS_LLC_THROUGHPUT_CLASS_2
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
EGPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1056 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_EGPRS_LLC_THROUGHPUT_CLASS_5
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
EGPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1057 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_EGPRS_LLC_THROUGHPUT_CLASS_6
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
EGPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1058 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_EGPRS_LLC_THROUGHPUT_CLASS_8
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
EGPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1059 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_GPRS_LLC_THROUGHPUT_CLASS_1
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
GPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1060 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_GPRS_LLC_THROUGHPUT_CLASS_10
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
GPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1061 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_GPRS_LLC_THROUGHPUT_CLASS_2
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
GPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1062 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_GPRS_LLC_THROUGHPUT_CLASS_3
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
GPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1063 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_GPRS_LLC_THROUGHPUT_CLASS_4
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
GPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1064 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_GPRS_LLC_THROUGHPUT_CLASS_5
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
GPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1065 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_GPRS_LLC_THROUGHPUT_CLASS_6
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
GPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1066 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_GPRS_LLC_THROUGHPUT_CLASS_7
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
GPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1067 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_GPRS_LLC_THROUGHPUT_CLASS_8
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
GPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1068 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_GPRS_LLC_THROUGHPUT_CLASS_9
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
GPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1069 / 1392
24 MFS-GPRS Counters
1070 / 1392
24 MFS-GPRS Counters
24.3.5.3.2 N/A
24.3.5.3.2.1 P16 - CUMULATED_OVERALL_DL_CONNECTION_TIME
Long Name
CUMULATED_OVERALL_DL_CONNECTION_TIME
Definition
Trigger Condition
The counter measures the cumulated time duration of all DL TBF connections in
the cell over the Granularity period. Active as well as delayed release periods are
taken into account. Each time duration starts upon reception from the Mobile
Station of 04.60 PACKET CONTROL ACKNOWLEDGMENT on PACCH/U during
the DL TBF establishment procedure (either in response to a PACKET DOWNLINK
ASSIGNMENT or PACKET TIMESLOT RECONFIGURE, whichever is applicable).
In case of normal DL TBF releases, the counter stops for a given DL TBF upon
reception of the reply to the 04.60 RLC DATA BLOCK (FBI=1, polling) sent by the
MFS for the last RLC block to send, i.e. 04.60 (EGPRS) PACKET DOWNLINK
ACK/NACK from the MS and there is no retransmission required, if the TBF was in
RLC acknowledged mode or 04.60 PACKET CONTROL ACK if the TBF was in
RLC unacknowledged mode. This last RLC data block is the last actual data block
of the TBF, i.e. the last useful RLC data block for a TBF in normal release mode,
or the last dummy RLC data block for a TBF in delayed release mode. In case
of abnormal DL TBF releases during active phase (i.e. not delayed phase), the
counter stops for a given DL TBF: - at the time when the RRM layer has received
the acknowledgment of the last DL LLC PDU (in case of RLC acknowledged
mode), or, - at the time when the RRM layer has sent the last DL LLC PDU to
the RLC layer (in case of RLC unacknowledged mode). In case of abnormal DL
TBF releases during delayed phase, the counter stops for a given DL TBF at the
time when the RRM layer has been informed that the DL TBF has entered the
delayed phase. The case the DL TBF is released due to a NC cell reselection is
managed as an abnormal DL TBF release. The time is provided in seconds with
one significant value after the comma (I.e. ROUND(10x)/10). The DL TBFs still
established at the expiration of the granularity period are not taken into account
in the cumulated value. They are taken into account only when the DL TBFs are
released. In case of traffic profile including a lot of "very long" TBF, this may lead
to a temporary under-estimated (then over-estimated) cumulated value.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF duration
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1071 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_DL_BIASED_AND_OPTIMAL_DL_ALLOCATION
Definition
Cumulated time during which downlink TBFs are granted the maximum number of
PDCHs they need and the corresponding MSs are engaged in downlink-biased
transfers.
Trigger Condition
The counter is incremented by the duration during which all downlink TBFs of a cell
which serve a downlink-biased transfer are granted as many timeslots as needed.
The results are cumulated over the granularity period. When determining the
number of timeslots needed by the mobile station for the DL TBF, the MFS takes
into account: i) The MS multislot class (or the MS high multislot class if allowed in
the cell). The GPRS or EGPRS (possibly high) multislot class is used depending
on the DL TBF establishment mode (in GPRS mode or EGPRS mode). ii) The
bias of the transfer. For instance, for an MS belonging to multislot class 6, for
which the transfer is deemed downlink-biased, the requested number of timeslots
in downlink is 3 and not 2. iii) The value of the "traffic type" (signalling or data) of
this MS. If the traffic type is signalling, only one PDCH is required. However, the
"optimality" may change during the life of the TBF, due to change in the traffic type
from signalling to data. In case of abnormal DL TBF releases during active phase
(i.e. not delayed phase), the counter stops for a given DL TBF: - at the time when
the RRM layer has received the acknowledgment of the last DL LLC PDU (in case
of RLC acknowledged mode), or, - at the time when the RRM layer has sent the
last DL LLC PDU to the RLC layer (in case of RLC unacknowledged mode). In
case of abnormal DL TBF releases during delayed phase, the counter stops for a
given DL TBF at the time when the RRM layer has been informed that the DL TBF
has entered the delayed phase. The case the DL TBF is released due to a NC cell
reselection is managed as an abnormal DL TBF release. The time is provided in
seconds with one significant value after the comma (i.e. ROUND(10x) / 10). The
DL TBFs still established at the expiration of the granularity period are not taken
into account in the cumulated value. They are taken into account only when the DL
TBFs are released. In case of traffic profile including a lot of "very long" TBF, this
may lead to a temporary under-estimated (then over-estimated) cumulated value.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF duration
Sub Domain 3
N/A
Measured Object
Cell
External Comment
- when the traffic type changes from "signalling" to "data" , the optimality is
re-assessed. - Once the traffic type is set to data, it can not be changed to
signalling, whatever the T-bit value.
1072 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_DL_BIASED_DL_TBF
Definition
Cumulated time during which MSs are engaged in downlink-biased transfers and
there is a DL TBF serving the MS.
Trigger Condition
The counter is incremented by the duration during which MSs are deemed in a
downlink-biased transfer. Only the time during which there is a DL TBF serving
the MS is taken into account. In case of abnormal DL TBF releases during active
phase (i.e. not delayed phase), the counter stops for a given DL TBF: - at the time
when the RRM layer has received the acknowledgment of the last DL LLC PDU (in
case of RLC acknowledged mode), or, - at the time when the RRM layer has sent
the last DL LLC PDU to the RLC layer (in case of RLC unacknowledged mode). In
case of abnormal DL TBF releases during delayed phase, the counter stops for a
given DL TBF at the time when the RRM layer has been informed that the DL TBF
has entered the delayed phase. The case the DL TBF is released due to a NC
cell reselection is managed as an abnormal DL TBF release. The time is provided
in seconds with one significant value after the comma (i.e. ROUND(10x) / 10).
The DL biased TBFs still established at the expiration of the granularity period are
not taken into account in the cumulated value. They are taken into account only
when the DL TBFs are released. In case of traffic profile including a lot of "very
long" TBF, this may lead to a temporary under-estimated (then over-estimated)
cumulated value.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF duration
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1073 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_DL_BIASED
Definition
Trigger Condition
The counter is incremented by the duration during which MSs are deemed in a
downlink-biased transfer. When an MS context is created : If it is downlink-biased,
then the timer is started for that MS. When the bias changes to uplink, then the
timer is stopped. When it changes back to downlink, the timer is restarted. If it
is uplink-biased, then the timer is started for that MS when the bias changes to
downlink. When it changes back to uplink, then the timer is stopped. When the
session ends, the timer for the MS is cumulated to P419. Note that when the MS
context is deemed downlink-biased and T3192 is running, even if there is no
on-going TBF, that duration shall be taken into account in this timer. In case the
MS has no on-going UL TBF and an abnormal DL TBF release is detected during
active phase (i.e. not delayed phase), the counter stops for the given MS: - at the
time when the RRM layer has received the acknowledgment of the last DL LLC
PDU (in case of RLC acknowledged mode), or, - at the time when the RRM layer
has sent the last DL LLC PDU to the RLC layer (in case of RLC unacknowledged
mode). In case the MS has no on-going UL TBF and an abnormal DL TBF release
is detected during delayed phase, the counter stops for the given MS at the time
when the RRM layer has been informed that the DL TBF has entered the delayed
phase. In case the MS has no on-going DL TBF and an abnormal UL TBF release
is detected, the counter stops for the given MS at the time when the RRM layer
has received the last UL LLC PDU. The case the DL TBF is released due to a
NC cell reselection is managed as an abnormal DL TBF release. Similarly, the
case the UL TBF is released due to a NC cell reselection is managed as an
abnormal UL TBF release. The time is provided in seconds with one significant
value after the comma (i.e. ROUND(10x) / 10). The MSs still DL biased at the
expiration of the granularity period are not taken into account in the cumulated
value. They are taken into account only when the biais change to UL. In case of
traffic profile including a lot of "very long" TBF with no bias changes, this may lead
to a temporary under-estimated (then over-estimated) cumulated value.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF duration
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1074 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_DURATION_1
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1075 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_DURATION_10
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1076 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_DURATION_2
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1077 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_DURATION_3
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1078 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_DURATION_4
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1079 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_DURATION_5
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1080 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_DURATION_6
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1081 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_DURATION_7
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1082 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_DURATION_8
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1083 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_DURATION_9
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1084 / 1392
24 MFS-GPRS Counters
CUMULATED_ACTIVE_DL_CONNECTION_TIME_GPRS_ACK
Definition
Cumulated time duration of all active DL TBFs established in GPRS mode and
RLC acknowledged mode Note: An active DL TBF connection is a DL TBF not in
delayed release state.
Trigger Condition
The counter measures the cumulated time duration of all active DL TBFs
established in GPRS mode and in RLC acknowledged mode in the cell over the
granularity period. For a given DL TBF, the counter starts at the establishment
of the DL TBF in GPRS mode and RLC acknowledged mode upon the receipt
from the Mobile Station of 04.60 a PACKET CONTROL ACKNOWLEDGEMENT
message on PACCH/U during the DL TBF establishment procedure. Once the DL
TBF enters the delayed release state, the counter is suspended upon the receipt
from the mobile station of an 04.60 PACKET DOWNLINK ACK/NACK message
acknowledging the correct reception of all the useful LLC PDUs. The counter is
resumed once the TBF becomes active again, i.e. when a new downlink LLC PDU
is sent to the Mobile Station. In case of normal DL TBF releases, the counter stops
for a given DL TBF upon the receipt of the RLC indication indicating that the TBF
has entered the delayed phase. The DL TBF enters the delayed phase upon the
receipt of the acknowledgment of the last useful RLC data block with (FBI = 0 and
a polling indication). In case of abnormal DL TBF releases, the counter stops for a
given DL TBF at the time when the RRM layer has received the acknowledgment
of the last DL LLC PDU. The case the DL TBF is released due to a NC cell
reselection is managed as an abnormal DL TBF release. The time is provided in
seconds with one significant value after the comma (i.e. ROUND(10x)/10). The DL
TBFs still established at the expiration of the granularity period are not taken into
account in the cumulated value. They are taken into account only when the DL
TBFs are released. In case of traffic profile including a lot of "very long" TBF, this
may lead to a temporary under-estimated (then over-estimated) cumulated value.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF duration
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1085 / 1392
24 MFS-GPRS Counters
CUMULATED_ACTIVE_DL_CONNECTION_TIME_GPRS_NACK
Definition
Cumulated time duration of all active DL TBFs established in GPRS mode and
RLC unacknowledged mode Note: An active DL TBF connection is a DL TBF
not in delayed release state.
Trigger Condition
The counter measures the cumulated time duration of all active DL TBFs
established in GPRS mode and in RLC unacknowledged mode in the cell over the
granularity period. For a given DL TBF, the counter starts at the establishment
of the DL TBF in GPRS mode and RLC unacknowledged mode upon the receipt
from the Mobile Station of 04.60 a PACKET CONTROL ACKNOWLEDGEMENT
message on PACCH/U during the DL TBF establishment procedure. Once the DL
TBF enters the delayed release state, the counter is suspended upon reception
from the mobile station of an 04.60 PACKET DOWNLINK ACK/NACK message
acknowledging the reception of the first RLC data block of the last useful DL LLC
PDUs. The counter is resumed once the TBF becomes active again, i.e. when a
new downlink LLC PDU is sent to the Mobile Station. In case of normal DL TBF
releases, the counter stops for a given TBF upon the receipt of the RLC indication
indicating that the TBF has entered the delayed phase. The DL TBF enters the
delayed phase at the sending of the last useful RLC data block with (FBI = 0 and a
polling indication). In case of abnormal DL TBF releases, the counter stops for a
given DL TBF at the time when the RRM layer has sent the last DL LLC PDU to
the RLC layer. The case the DL TBF is released due to a NC cell reselection is
managed as an abnormal DL TBF release. The time is provided in seconds with
one significant value after the comma (i.e. ROUND(10x)/10). The DL TBFs still
established at the expiration of the granularity period are not taken into account
in the cumulated value. They are taken into account only when the DL TBFs are
released. In case of traffic profile including a lot of "very long" TBF, this may lead
to a temporary under-estimated (then over-estimated) cumulated value.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF duration
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1086 / 1392
24 MFS-GPRS Counters
CUMULATED_ACTIVE_DL_CONNECTION_TIME_EGPRS_ACK
Definition
Cumulated time duration of all active DL TBFs established in EGPRS mode and
RLC acknowledged mode. Note: An active DL TBF connection is a DL TBF not in
delayed release state.
Trigger Condition
The counter measures the cumulated time duration of all active DL TBFs
established in EGPRS mode and in RLC acknowledged mode in the cell over the
granularity period. For a given DL TBF, the counter starts at the establishment
of the DL TBF in EGPRS mode and RLC acknowledged mode upon the receipt
from the Mobile Station of 04.60 a PACKET CONTROL ACKNOWLEDGEMENT
message on PACCH/U during the DL TBF establishment procedure. Once the DL
TBF enters the delayed release state, the counter is suspended upon the receipt
from the mobile station of an 04.60 EGPRS PACKET DOWNLINK ACK/NACK
message acknowledging the receipt of first DL RLC data block of the last DL LLC
PDU. The counter is resumed once the TBF becomes active again, i.e. when
a new downlink LLC PDU is sent to the Mobile Station. In case of normal DL
TBF releases, the counter stops for a given DL TBF upon the receipt of the RLC
indication indicating that the TBF has entered the delayed phase. The DL TBF
enters the delayed phase upon the receipt of the acknowledgment of the last
useful RLC data block with (FBI = 0 and a polling indication). In case of abnormal
DL TBF releases, the counter stops for a given DL TBF at the time when the RRM
layer has received the acknowledgment of the last DL LLC PDU. The case the
DL TBF is released due to a NC cell reselection is managed as an abnormal DL
TBF release. The time is provided in seconds with one significant value after the
comma (i.e. ROUND(10x)/10). The DL TBFs still established at the expiration of
the granularity period are not taken into account in the cumulated value. They are
taken into account only when the DL TBFs are released. In case of traffic profile
including a lot of "very long" TBF, this may lead to a temporary under-estimated
(then over-estimated) cumulated value.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF duration
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1087 / 1392
24 MFS-GPRS Counters
CUMULATED_ACTIVE_DL_CONNECTION_TIME_EGPRS_NACK
Definition
Cumulated time duration of all active DL TBFs established in EGPRS mode and
RLC unacknowledged mode. Note: An active DL TBF connection is a DL TBF
not in delayed release state.
Trigger Condition
The counter measures the cumulated time duration of all active DL TBFs
established in EGPRS mode and in RLC unacknowledged mode in the cell over
the granularity period. For a given DL TBF, the counter starts at the establishment
of the DL TBF in EGPRS mode and RLC unacknowledged mode upon the receipt
from the Mobile Station of 04.60 a PACKET CONTROL ACKNOWLEDGEMENT
message on PACCH/U during the DL TBF establishment procedure. Once the DL
TBF enters the delayed release state, the counter is suspended upon the receipt
from the mobile station of an 04.60 EGPRS PACKET DOWNLINK ACK/NACK
message acknowledging the reception of the first RLC data block of the last useful
DL LLC PDUs. The counter is resumed once the TBF becomes active again, i.e.
when a new downlink LLC PDU is sent to the Mobile Station. In case of normal
DL TBF releases, the counter stops for a given TBF upon the receipt of the RLC
indication indicating that the TBF has entered the delayed phase. The DL TBF
enters the delayed phase at the sending of the last useful RLC data block with (FBI
= 0 and a polling indication). In case of abnormal DL TBF releases, the counter
stops for a given DL TBF at the time when the RRM layer has sent the last DL
LLC PDU to the RLC layer. The case the DL TBF is released due to a NC cell
reselection is managed as an abnormal DL TBF release. The time is provided in
seconds with one significant value after the comma (i.e. ROUND(10x)/10). The DL
TBFs still established at the expiration of the granularity period are not taken into
account in the cumulated value. They are taken into account only when the DL
TBFs are released. In case of traffic profile including a lot of "very long" TBF, this
may lead to a temporary under-estimated (then over-estimated) cumulated value.
Sub Domain 1
Radio interface
Sub Domain 2
DL TBF duration
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1088 / 1392
24 MFS-GPRS Counters
24.3.5.4.2 N/A
24.3.5.4.2.1 P454a_3 - DISTRIB_UL_TBF_VOLUME_3
Long Name
DISTRIB_UL_TBF_VOLUME_3
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P44.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1089 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_TBF_VOLUME_4
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P44.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1090 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_VOLUME_1
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P43.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1091 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_VOLUME_10
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P43. Whenever a
TBF volume exceeds PD_DL_TBF_VOLUME_THR_10, then it is not taken into
account.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1092 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_VOLUME_2
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P43.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1093 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_VOLUME_3
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P43.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1094 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_VOLUME_4
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P43.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1095 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_VOLUME_5
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P43.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1096 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_VOLUME_6
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P43.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1097 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_VOLUME_7
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P43.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1098 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_VOLUME_8
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P43.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1099 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_TBF_VOLUME_9
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P43.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1100 / 1392
24 MFS-GPRS Counters
24.3.5.5 PDCH
24.3.5.5.1 All PDCH
P13 - TIME_DL_PDCH_CONG (Section 24.3.5.5.2.1 )
P26 - TIME_UL_PDCH_CONG (Section 24.3.5.5.2.2 )
P38b - CUMULATED_TIME_PDCH_USED (Section 24.3.5.5.2.3 )
P38c - CUMULATED_TIME_PDCH_USED_EGPRS (Section 24.3.5.5.2.4 )
P38e - CUMULATED_TIME_PDCH_USED_DL_CELL (Section 24.3.5.5.2.5 )
P38f - CUMULATED_TIME_PDCH_USED_UL_CELL (Section 24.3.5.5.2.6 )
P414bis - CUMULATED_TIME_ALLOCATED_SPDCH (Section 24.3.5.5.2.7 )
P415bis - MAX_OF_ALLOCATED_SPDCH (Section 24.3.5.5.2.8 )
P416bis - MIN_OF_ALLOCATED_SPDCH (Section 24.3.5.5.2.9 )
P417 - NB_PREEMPTED_PDCH (Section 24.3.5.5.2.10 )
P495 - MAX_NB_USED_SPDCH_CELL (Section 24.3.5.5.2.11 )
P496 - MIN_NB_USED_SPDCH_CELL (Section 24.3.5.5.2.12 )
24.3.5.5.2 N/A
24.3.5.5.2.1 P13 - TIME_DL_PDCH_CONG
Long Name
TIME_DL_PDCH_CONG
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PDCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1101 / 1392
24 MFS-GPRS Counters
TIME_UL_PDCH_CONG
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PDCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1102 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_PDCH_USED
Definition
Cumulated time during which the slave PDCHs carry at least one UL or DL TBF
(TBF established in GPRS mode or EGPRS mode).
Trigger Condition
The timer is the sum of all unit times per slave PDCH during which the a slave
PDCH supported carries at least one UL or DL TBF (TBF established in GPRS
mode or EGPRS mode). Note 1: For downlink TBF, active , delayed phases are
taken into account. Note 2: The time is provided in seconds with one significant
digit after the comma (i.e. ROUND(10x) / 10). Note 3 : For uplink TBF, active ,
delayed final PUAN , extended phases are taken into account.
Sub Domain 1
Radio interface
Sub Domain 2
PDCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1103 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_PDCH_USED_EGPRS
Definition
Cumulated time during which the slave PDCHs carry at least one UL or DL TBF
established in EGPRS mode.
Trigger Condition
The timer is the sum of all unit times per slave PDCH during which the slave PDCH
supported at least one UL or DL TBF established in EGPRS mode. The time is
provided in seconds with one significant digit after the comma (i.e. ROUND(10x) /
10).
Sub Domain 1
Radio interface
Sub Domain 2
PDCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1104 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_PDCH_USED_DL_CELL
Definition
Cumulated time during which a PDCH is used by at least one DL TBF (in GPRS or
EGPRS mode), cumulated over all the PDCHs of the cell.
Trigger Condition
The timer is the sum of all unit times per slave PDCH during which the slave
PDCH supported at least one DL TBF (established in GPRS mode or EGPRS
mode). Note: Only Active, delayed, extended phases of the TBF are taken into
account. The time is provided in seconds with one significant value after the
comma (i.e. ROUND(10x) / 10).
Sub Domain 1
Radio interface
Sub Domain 2
PDCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1105 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_PDCH_USED_UL_CELL
Definition
Cumulated time during which a PDCH is used by at least one UL TBF (in GPRS or
EGPRS mode), cumulated over all the PDCHs of the cell.
Trigger Condition
The timer is the sum of all unit times per slave PDCH during which the slave
PDCH supported at least one UL TBF (established in GPRS mode or EGPRS
mode). Note: Only Active, delayed, extended phases of the TBF are taken into
account. The time is provided in seconds with one significant value after the
comma (i.e. ROUND(10x) / 10).
Sub Domain 1
Radio interface
Sub Domain 2
PDCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1106 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_ALLOCATED_SPDCH
Definition
This counter integrates over time the values of the allocated SPDCH during the
whole granularity period.
Trigger Condition
When the granularity period starts, the counter is reset to 0. The current value
of SPDCHs allocated to the MFS by the BSC is multiplied by the duration until
the next allocated SPDCH update is received from the BSC (I.e. reception of
a (BSCGP) RADIO RESOURCE ALLOCATION INDICATION indicating a new
number of SPDCHs allocated to the MFS). Then the new value of allocated
SPDCH is multiplied by the duration until the next allocated SPDCH update , and
so on. The counter is the sum of all the computed values.
Sub Domain 1
Radio interface
Sub Domain 2
PDCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1107 / 1392
24 MFS-GPRS Counters
MAX_OF_ALLOCATED_SPDCH
Definition
This counter gives the maximum value of allocated SPDCH during the whole
granularity period.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PDCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1108 / 1392
24 MFS-GPRS Counters
MIN_OF_ALLOCATED_SPDCH
Definition
This counter gives the minimum value of allocated SPDCH during the whole
granularity period.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PDCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1109 / 1392
24 MFS-GPRS Counters
NB_PREEMPTED_PDCH
Definition
This counter measures the overall number of slave PDCHs which have been
released after having been marked by the soft pre-emption procedure in the cell
over the granularity period.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PDCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1110 / 1392
24 MFS-GPRS Counters
MAX_NB_USED_SPDCH_CELL
Definition
Maximum number of used slave PDCHs in the cell. Note: An used PDCH is a
PDCH that carries at least one UL or DL TBF.
Trigger Condition
An internal counter tracks the current number of used slave PDCH in the cell.
This internal counter is - Incremented when one UL or DL TBF is carried by a
salve PDCH. - Decremented when no UL or DL TBF is carried by a slave PDCH.
Whenever this internal counter is incremented, its new value is compared with the
stored maximum number of used PDCHs in the cell. If this value is higher than
the stored maximum value, the value becomes the new maximum. The master
PDCHs are excluded from this counter.
Sub Domain 1
Radio interface
Sub Domain 2
PDCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1111 / 1392
24 MFS-GPRS Counters
MIN_NB_USED_SPDCH_CELL
Definition
Minimum number of used slave PDCHs in the Note: An used PDCH is a PDCH
that carries at least one UL or DL TBF.
Trigger Condition
An internal counter tracks the current number of used slave PDCH in the cell.
This internal counter is - Incremented when one UL or DL TBF is carried by a
salve PDCH. - Decremented when no UL or DL TBF is carried by a slave PDCH.
Whenever this internal counter is decremented, its new value is compared with the
stored minimum number of used PDCHs in the cell. If this value is lower than the
stored minimum value, the value becomes the new minimum.
Sub Domain 1
Radio interface
Sub Domain 2
PDCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1112 / 1392
24 MFS-GPRS Counters
1113 / 1392
24 MFS-GPRS Counters
24.3.5.6.2 N/A
24.3.5.6.2.1 P160 - NB_DL_TBF_1_succ
Long Name
NB_DL_TBF_1_succ
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1114 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_2_3_succ
Definition
Trigger Condition
Whenever the MFS allocates exactly 2 PDCHs (or 3 PDCHs) for a DL TBF in case
of an MS requesting 2 slots DL (or 3 slots DL). When determining the number of
timeslots requested by the mobile station for the DL TBF, the MFS takes into
account: i) The MS multislot class. The GPRS or EGPRS multislot class is used
depending on the DL TBF establishment mode (in GPRS mode or EGPRS mode).
ii) The bias of the transfer. For instance, for an MS belonging to multislot class
10, for which the transfer is deemed uplink-biased, the requested number of
timeslots in downlink is 3 and not 4. iii) The value of the T-bit indicated in the DL
LLC PDU triggering the DL TBF establishment. If the T-bit is set to signalling, only
one PDCH is required.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1115 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_4_5_succ
Definition
Trigger Condition
Whenever the system MFS allocates exactly 4 PDCHs (or 5 PDCHs) for a DL
TBF in case of an MS requesting 4 slots DL (or 5 slots DL). When determining
the number of timeslots requested by the mobile station for the DL TBF, the MFS
takes into account: i) The MS multislot class (or the MS high multislot class if
allowed in the cell). The GPRS or EGPRS (possibly high) multislot class is used
depending on the DL TBF establishment mode (in GPRS mode or EGPRS mode).
ii) The bias of the transfer. For instance, for an MS belonging to multislot class
12, for which the transfer is deemed downlink-biased, the requested number of
timeslots in downlink is 4 and not 1. iii) The value of the T-bit indicated in the DL
LLC PDU triggering the DL TBF establishment. If the T-bit is set to signalling, only
one PDCH is required.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1116 / 1392
24 MFS-GPRS Counters
MAX_NB_DL_TBF_SIMUL_EST
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1117 / 1392
24 MFS-GPRS Counters
AV_NB_DL_TBF_SIMUL_EST
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1118 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_PDCH_DL_TBF_CELL
Definition
Cumulated time during which an DL TBF uses one PDCH, for all PDCHs of the
TBF, and for all TBFs of the cell (in GPRS or EGPRS mode).
Trigger Condition
The counter shall consider the resource allocation changes that occur further to a
DL TBF re-allocation. Note: Active , delayed, extended phases of the TBF are
taken into account (only). The time is provided in seconds with one significant
value after the comma (i.e. ROUND(10x) / 10).
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1119 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_PDCH_DL_TBF_GMM_SIG_CELL
Definition
Cumulated time during which a DL TBF established for GMM signalling purposes
uses a PDCH (in GPRS or EGPRS mode), for all TBFs of the cell.
Trigger Condition
For a given DL TBF, this counter is started at the establishment of the DL TBFs
established to carry GMM signalling traffic to the MS. It is stopped at the end of
the active phase of the DL TBF or on receipt of a DL LLC PDU without the T-bit
set. Note : such TBFs only have one PDCH allocated. The time is provided in
seconds with one significant value after the comma (i.e. ROUND(10x) / 10).
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1120 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_PDCH_UNIT_ALLOC_1
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1121 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_PDCH_UNIT_ALLOC_10
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1122 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_PDCH_UNIT_ALLOC_2
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1123 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_PDCH_UNIT_ALLOC_3
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1124 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_PDCH_UNIT_ALLOC_4
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1125 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_PDCH_UNIT_ALLOC_5
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1126 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_PDCH_UNIT_ALLOC_6
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1127 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_PDCH_UNIT_ALLOC_7
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1128 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_PDCH_UNIT_ALLOC_8
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1129 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_PDCH_UNIT_ALLOC_9
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1130 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_EST_REQ_EGPRS_PIM
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1131 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_SUCC_EGPRS_PIM
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1132 / 1392
24 MFS-GPRS Counters
NB_DL_TBF_EST_REQ_EGPRS_PIM
Definition
Trigger Condition
The counter is incremented by one whenever the MFS receives a DL LLC PDU for
an EGPRS capable MS in packet idle mode. Note: If transmission resources are
available, this event will trigger a DL TBF establishment on (P)CCCH (in GPRS
mode or in EGPRS mode). Generally, all counters related to TBF establishment
requests only take into account the first attempt, i.e. no repetitions are counted.
Note: This counter only applies in an EGPRS cell. In case of GPRS-only cell,
this counter is not incremented.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1133 / 1392
24 MFS-GPRS Counters
24.3.5.7.2 N/A
24.3.5.7.2.1 P161 - NB_UL_TBF_1_succ
Long Name
NB_UL_TBF_1_succ
Definition
Number of uplink TBF establishment requests (1 slot allocated) which are satisfied
at once by the initial allocation..
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1134 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_2_3_succ
Definition
Trigger Condition
Whenever the MFS allocates exactly 2 PDCHs (or 3 PDCHs) for an UL TBF in
case of an MS requesting 2 slots UL (or 3 slots UL). When determining the number
of timeslots requested by the mobile station for the UL TBF, the MFS takes into
account: i) The MS multislot class. The GPRS or EGPRS multislot class is used
depending on the UL TBF establishment mode (in GPRS mode or EGPRS mode).
ii) The bias of the transfer. For instance, for an MS belonging to multislot class 6,
for which the transfer is deemed uplink-biased, the requested number of timeslots
in uplink is 2 and not 1.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1135 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_4_5_succ
Definition
Trigger Condition
Whenever the MFS allocates exactly 4 PDCHs (or 5 PDCHs) for an UL TBF in
case of an MS requesting 4 slots UL (or 5 slots UL). When determining the number
of timeslots requested by the mobile station for the UL TBF, the MFS takes into
account: i) The MS multislot class. The GPRS or EGPRS multislot class is used
depending on the UL TBF establishment mode (in GPRS mode or EGPRS mode).
ii) The bias of the transfer. For instance, for an MS belonging to multislot class 12,
for which the transfer is deemed uplink-biased, the requested number of timeslots
in uplink is 4 and not 1.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1136 / 1392
24 MFS-GPRS Counters
NB_UL_TBF_EST_SUCC_EGPRS_PIM
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1137 / 1392
24 MFS-GPRS Counters
MAX_NB_UL_TBF_SIMUL_EST
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1138 / 1392
24 MFS-GPRS Counters
AV_NB_UL_TBF_SIMUL_EST
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1139 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_PDCH_UL_TBF_CELL
Definition
Cumulated time during which an UL TBF uses one PDCH, for all PDCHs of the
TBF, and for all TBFs of the cell (in GPRS or EGPRS mode).
Trigger Condition
The counter shall consider the resource allocation changes that occur further to a
UL TBF re-allocation. Note: Active , delayed, extended phases of the TBF are
taken into account (only). The time is provided in seconds with one significant
value after the comma (i.e. ROUND(10x) / 10).
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1140 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_PDCH_UNIT_ALLOC_1
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1141 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_PDCH_UNIT_ALLOC_10
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1142 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_PDCH_UNIT_ALLOC_2
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1143 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_PDCH_UNIT_ALLOC_3
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1144 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_PDCH_UNIT_ALLOC_4
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1145 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_PDCH_UNIT_ALLOC_5
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1146 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_PDCH_UNIT_ALLOC_6
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1147 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_PDCH_UNIT_ALLOC_7
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1148 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_PDCH_UNIT_ALLOC_8
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1149 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_PDCH_UNIT_ALLOC_9
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1150 / 1392
24 MFS-GPRS Counters
1151 / 1392
24 MFS-GPRS Counters
24.3.5.8.2 N/A
24.3.5.8.2.1 P531a_1 - DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_1
Long Name
DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_1
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in EGPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. - The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1152 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_10
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in EGPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. - The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1153 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_11
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in EGPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. - The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1154 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_2
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in EGPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. - The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1155 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_3
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in EGPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. - The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1156 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_4
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in EGPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. - The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1157 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_5
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in EGPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. - The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1158 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_6
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in EGPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. - The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1159 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_7
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in EGPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. - The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1160 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_8
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in EGPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. - The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1161 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_EGPRS_LLC_THROUGHPUT_CLASS_9
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in EGPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. - The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1162 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_EGPRS_LLC_THROUGHPUT_CLASS_3
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
EGPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1163 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_EGPRS_LLC_THROUGHPUT_CLASS_4
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
EGPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1164 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_EGPRS_LLC_THROUGHPUT_CLASS_7
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
EGPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1165 / 1392
24 MFS-GPRS Counters
DISTRIB_DL_EGPRS_LLC_THROUGHPUT_CLASS_9
Definition
Trigger Condition
During MS context lifetime , the DL LLC PDU size sent in the TBF established in
EGPRS mode and their transfer duration are cumulated. When the MS context is
deleted , the DL LLC throughput (cumulated DL LLC PDU size/cumulated transfer
duration) is estimated and the suitable class of the distribution is incremented by
one. Note : - Only DL LLC PDU whose traffic type is data are taken into account. The transfer duration of one (or a set of DL LLC PDU) is estimated by RRM when
a LLC PDU (or a set of DL LLC PDU) have been correctly received by the MS .
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1166 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_GPRS_LLC_THROUGHPUT_CLASS_1
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in GPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1167 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_GPRS_LLC_THROUGHPUT_CLASS_10
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in GPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. - The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1168 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_GPRS_LLC_THROUGHPUT_CLASS_2
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in GPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is
data are taken into account. - The size and transfer duration of a UL LLC PDU
is provided by RLC to RRM when a UL LLC PDU have been correctly received
from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1169 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_GPRS_LLC_THROUGHPUT_CLASS_3
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in GPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. - The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1170 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_GPRS_LLC_THROUGHPUT_CLASS_4
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in GPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. - The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1171 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_GPRS_LLC_THROUGHPUT_CLASS_5
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in GPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. - The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1172 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_GPRS_LLC_THROUGHPUT_CLASS_6
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in GPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. - The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1173 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_GPRS_LLC_THROUGHPUT_CLASS_7
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in GPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. - The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1174 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_GPRS_LLC_THROUGHPUT_CLASS_8
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in GPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. - The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1175 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_GPRS_LLC_THROUGHPUT_CLASS_9
Definition
Trigger Condition
During MS context lifetime , the size of the UL LLC PDU received in the TBF
established in GPRS mode and their transfert duration are cumulated. When
the MS context is deleted , the UL LLC throughput (cumulated UL LLC PDU
size/cumulated transfer time) is estimated and the suitable class of the distribution
is incremented by one. Note : -Only UL LLC PDU whose TBF traffic type is data
are taken into account. - The size and transfer duration of a UL LLC PDU is
estimated by RRM when a UL LLC PDU have been correctly received from the MS.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1176 / 1392
24 MFS-GPRS Counters
1177 / 1392
24 MFS-GPRS Counters
24.3.5.9.2 N/A
24.3.5.9.2.1 P129a - CUMULATED_ACTIVE_UL_CONNECTED_TIME_GPRS_ACK
Long Name
CUMULATED_ACTIVE_UL_CONNECTED_TIME_GPRS_ACK
Definition
Cumulated time duration of all active UL TBFs established in GPRS mode and
RLC acknowledged mode. Note: An active UL TBF connection is an UL TBF
not in extended phase.
Trigger Condition
The counter measures the cumulated time duration of all UL TBFs established in
GPRS mode and RLC acknowledged Mode in the cell over the granularity period.
Note 1 : The time during which the emission of the final Packet Uplink Ack/Nack
message is delayed and the time during which the UL is in extended phase are not
taken into account Note 2 : In case of abnormal UL TBF releases, the counter
stops at the time when the RRM layer has received the last UL LLC PDU. Note 3 :
The case the UL TBF is released due to a NC cell reselection is managed as an
abnormal UL TBF release. The time is provided in seconds with one significant
value after the comma (i.e. ROUND(10x) / 10). The UL TBFs still established at
the expiration of the granularity period are not taken into account in the cumulated
value. They are taken into account only when the UL TBFs are released. In case
of traffic profile including a lot of "very long" TBF, this may lead to a temporary
under-estimated (then over-estimated) cumulated value.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF duration
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1178 / 1392
24 MFS-GPRS Counters
CUMULATED_ACTIVE_UL_CONNECTED_TIME_GPRS_NACK
Definition
Cumulated time duration of all active UL TBFs established in GPRS mode and
RLC unacknowledged mode. Note: An active UL TBF connection is an UL TBF
not in extended phase.
Trigger Condition
The counter measures the cumulated time duration of all UL TBFs established
in GPRS mode and RLC unacknowledged mode in the cell over the granularity
period. Note1 : The time during which the emission of the final Packet Uplink
Ack/Nack message is delayed and the time during which the UL is in extended
phase not taken into account. Note 2 :In case of abnormal UL TBF releases,
the counter stops at the time when the RRM layer has received the last UL LLC
PDU. Note 3 :The case the UL TBF is released due to a NC cell reselection is
managed as an abnormal UL TBF release. The time is provided in seconds with
one significant value after the comma (i.e. ROUND(10x) / 10). The UL TBFs still
established at the expiration of the granularity period are not taken into account
in the cumulated value. They are taken into account only when the UL TBFs are
released. In case of traffic profile including a lot of "very long" TBF, this may lead
to a temporary under-estimated (then over-estimated) cumulated value.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF duration
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1179 / 1392
24 MFS-GPRS Counters
CUMULATED_ACTIVE_UL_CONNECTED_TIME_EGPRS_ACK
Definition
Cumulated time duration of all active UL TBFs established in EGPRS mode and
RLC acknowledged mode. Note: An active UL TBF connection is an UL TBF
not in extended phase.
Trigger Condition
The counter measures the cumulated time duration of all UL TBFs established in
EGPRS mode and RLC acknowledged Mode in the cell over the granularity period.
Note 1 : The time during which the emission of the final Packet Uplink Ack/Nack
message and the time during which the UL is in extended phase delayed is not
taken into account. Note 2 : In case of abnormal UL TBF releases, the counter
stops at the time when the RRM layer has received the last UL LLC PDU. Note 3 :
The case the UL TBF is released due to a NC cell reselection is managed as an
abnormal UL TBF release. The time is provided in seconds with one significant
value after the comma (i.e. ROUND(10x) / 10). The UL TBFs still established at
the expiration of the granularity period are not taken into account in the cumulated
value. They are taken into account only when the UL TBFs are released. In case
of traffic profile including a lot of "very long" TBF, this may lead to a temporary
under-estimated (then over-estimated) cumulated value.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF duration
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1180 / 1392
24 MFS-GPRS Counters
CUMULATED_ACTIVE_UL_CONNECTED_TIME_EGPRS_NACK
Definition
Cumulated time duration of all active UL TBFs established in EGPRS mode and
RLC unacknowledged mode. Note: An active UL TBF connection is an UL TBF
not in extended phase.
Trigger Condition
The counter measures the cumulated time duration of all UL TBFs established
in EGPRS mode and RLC unacknowledged mode in the cell over the granularity
period. Note1 : The time during which the emission of the final Packet Uplink
Ack/Nack message and the time during which the UL is in extended phase
delayed is not taken into account. Note 2 :In case of abnormal UL TBF releases,
the counter stops at the time when the RRM layer has received the last UL LLC
PDU. Note 3 :The case the UL TBF is released due to a NC cell reselection is
managed as an abnormal UL TBF release. The time is provided in seconds with
one significant value after the comma (i.e. ROUND(10x) / 10). The UL TBFs still
established at the expiration of the granularity period are not taken into account
in the cumulated value. They are taken into account only when the UL TBFs are
released. In case of traffic profile including a lot of "very long" TBF, this may lead
to a temporary under-estimated (then over-estimated) cumulated value.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF duration
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1181 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_UL_BIASED_AND_OPTIMAL_UL_ALLOCATION
Definition
Cumulated time during which uplink TBFs are granted the maximum number
of PDCHs they need and the corresponding MSs are engaged in uplink-biased
transfers.
Trigger Condition
The counter is incremented by the duration during which all uplink TBFs of a cell
which serve an uplink-biased transfer are granted as many timeslots as needed.
The results are cumulated over the granularity period. When determining the
number of timeslots needed by the mobile station for the UL TBF, the MFS takes
into account: i) The MS multislot class. The GPRS or EGPRS multislot class is
used depending on the UL TBF establishment mode (in GPRS mode or EGPRS
mode). ii) The bias of the transfer. For instance, for an MS belonging to multislot
class 6, for which the transfer is deemed uplink-biased, the requested number of
timeslots in uplink is 2 and not 1. iii) The value of the "traffic type" (signalling
or data) of this MS. If the traffic type is signalling, only one PDCH is required.
However, the "optimality" may change during the life of the TBF, due to change in
the traffic type from signalling to data. In case of abnormal UL TBF releases, the
counter stops at the time when the RRM layer has received the last UL LLC PDU.
The case the UL TBF is released due to a NC cell reselection is managed as an
abnormal UL TBF release. The time is provided in seconds with one significant
value after the comma (i.e. ROUND(10x) / 10). The optimal UL biaised TBFs still
established at the expiration of the granularity period are not taken into account
in the cumulated value. They are taken into account only when the UL TBFs are
released. In case of traffic profile including a lot of "very long" TBF, this may lead
to a temporary under-estimated (then over-estimated) cumulated value.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF duration
Sub Domain 3
N/A
Measured Object
Cell
External Comment
- when the traffic type changes from "signalling" to "data", the optimality is
re-assessed. - Once the traffic type is set to data, it can not be changed to
signalling, whatever the T-bit value.
1182 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_UL_BIASED_UL_TBF
Definition
Cumulated time during which MSs are engaged in uplink-biased transfers and
there is an UL TBF serving the MS.
Trigger Condition
The counter is incremented by the duration during which MSs are deemed in an
uplink-biased transfer. Only the time during which there is an UL TBF serving the
MS is taken into account. In case of abnormal UL TBF releases, the counter stops
at the time when the RRM layer has received the last UL LLC PDU. The case the
UL TBF is released due to a NC cell reselection is managed as an abnormal UL
TBF release. The time is provided in seconds with one significant value after the
comma (i.e. ROUND(10x) / 10). The UL TBFs still established at the expiration of
the granularity period are not taken into account in the cumulated value. They are
taken into account only when the UL TBFs are released. In case of traffic profile
including a lot of "very long" TBF, this may lead to a temporary under-estimated
(then over-estimated) cumulated value.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF duration
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1183 / 1392
24 MFS-GPRS Counters
CUMULATED_TIME_UL_BIASED
Definition
Trigger Condition
The counter is incremented by the duration during which MSs are deemed in an
uplink-biased transfer. When an MS context is created : If it is uplink-biased,
then the timer is started for that MS. When the bias changes to downlink, then
the timer is stopped. When it changes back to uplink, the timer is restarted. If it is
downlink-biased, then the timer is started for that MS when the bias changes to
uplink. When it changes back to downlink, then the timer is stopped. When the
session ends, the timer for the MS is cumulated to P420. Note that when the MS
context is deemed uplink-biased and T3192 is running, even if there is no on-going
TBF, that duration shall be taken into account in this timer. In case the MS has
no on-going UL TBF and an abnormal DL TBF release is detected during active
phase (i.e. not delayed phase), the counter stops for the given MS: - at the time
when the RRM layer has received the acknowledgment of the last DL LLC PDU
(in case of RLC acknowledged mode), or, - at the time when the RRM layer has
sent the last DL LLC PDU to the RLC layer (in case of RLC unacknowledged
mode). In case the MS has no on-going UL TBF and an abnormal DL TBF release
is detected during delayed phase, the counter stops for the given MS at the time
when the RRM layer has been informed that the DL TBF has entered the delayed
phase. In case the MS has no on-going DL TBF and an abnormal UL TBF release
is detected, the counter stops for the given MS at the time when the RRM layer
has received the last UL LLC PDU. The case the DL TBF is released due to a
NC cell reselection is managed as an abnormal DL TBF release. Similarly, the
case the UL TBF is released due to a NC cell reselection is managed as an
abnormal UL TBF release. The time is provided in seconds with one significant
value after the comma (i.e. ROUND(10x) / 10). The MSs still UL biaised at the
expiration of the granularity period are not taken into account in the cumulated
value. They are taken into account only when the biais change to DL. In case of
traffic profile including a lot of "very long" TBF with no bias changes, this may lead
to a temporary under-estimated (then over-estimated) cumulated value.
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF duration
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1184 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_TBF_DURATION_1
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1185 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_TBF_DURATION_10
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1186 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_TBF_DURATION_2
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1187 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_TBF_DURATION_3
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1188 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_TBF_DURATION_4
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1189 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_TBF_DURATION_5
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1190 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_TBF_DURATION_6
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1191 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_TBF_DURATION_7
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1192 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_TBF_DURATION_8
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1193 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_TBF_DURATION_9
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF duration
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1194 / 1392
24 MFS-GPRS Counters
CUMULATED_ACT_EXT_UL_CONNECTION_TIME
Definition
Cumulated overall time of UL TBF connections (in active state or extended phase).
Trigger Condition
The counter measures the cumulated time duration of all UL TBFs connections in
active or extended phase in the cell over the granularity period. The counter starts
: For a given UL TBF, at the establishment of the UL TBF in (E)GPRS mode (the
first UL RLC data block has been received). The counter stops : For a given UL
TBF, at the release of the UL TBF in (E)GPRS mode. Note : This counter applies
to both GPRS and EGPRS TBFs and to both acknowledge or unacknowledge
mode. Note1 : The time during which the emission of the final Packet Uplink
Ack/Nack message is delayed and the time during which the UL is in extended
phase are taken into account. Note 2 :In case of abnormal UL TBF releases,
the counter stops at the time when the RRM layer has received the last UL LLC
PDU. Note 3 :The case the UL TBF is released due to a NC cell reselection is
managed as an abnormal UL TBF release. The time is provided in seconds with
one significant value after the comma (i.e. ROUND(10x) / 10).
Sub Domain 1
Radio interface
Sub Domain 2
UL TBF duration
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1195 / 1392
24 MFS-GPRS Counters
24.3.5.10.2 N/A
24.3.5.10.2.1 P454a_1 - DISTRIB_UL_TBF_VOLUME_1
Long Name
DISTRIB_UL_TBF_VOLUME_1
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P44.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1196 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_TBF_VOLUME_10
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P44. Whenever a
TBF volume exceeds PD_UL_TBF_VOLUME_THR_10, then it is not taken into
account.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1197 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_TBF_VOLUME_2
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P44.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1198 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_TBF_VOLUME_5
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P44.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1199 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_TBF_VOLUME_6
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P44.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1200 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_TBF_VOLUME_7
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P44.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1201 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_TBF_VOLUME_8
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P44.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1202 / 1392
24 MFS-GPRS Counters
DISTRIB_UL_TBF_VOLUME_9
Definition
Trigger Condition
TBF in GPRS and EGPRS mode, in RLC acknowledged and RLC unacknowledged
mode are taken into account. The volume is calculated as in P44.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
DistCell
External Comment
1203 / 1392
24 MFS-GPRS Counters
1204 / 1392
24 MFS-GPRS Counters
1205 / 1392
24 MFS-GPRS Counters
1206 / 1392
24 MFS-GPRS Counters
1207 / 1392
24 MFS-GPRS Counters
24.4.2.2 GCH
24.4.2.2.1 All GCH
P103 - NB_ERROR_UL_GCH_FRAME (Section 24.4.2.2.2.1 )
24.4.2.2.2 N/A
24.4.2.2.2.1 P103 - NB_ERROR_UL_GCH_FRAME
Long Name
NB_ERROR_UL_GCH_FRAME
Definition
Number of GCH frames badly received by the MFS (due to a bad CRC).
Trigger Condition
Whenever the EGCH layer detects that a GCH frame has not been correctly
decoded in the MFS (due a bad CRC).
Sub Domain 1
Ater interface
Sub Domain 2
GCH
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1208 / 1392
24 MFS-GPRS Counters
24.4.2.3 LapD
24.4.2.3.1 All LapD
P41 - NB_KBYTES_SENT_TO_BSC (Section 24.4.2.3.2.1 )
P42 - NB_KBYTES_RECEIVED_FROM_BSC (Section 24.4.2.3.2.2 )
24.4.2.3.2 N/A
24.4.2.3.2.1 P41 - NB_KBYTES_SENT_TO_BSC
Long Name
NB_KBYTES_SENT_TO_BSC
Definition
Trigger Condition
For each message sent to the BSC on the LapD link, the counter is incremented
by the number of bytes of the message. The result is expressed in kilo bytes.
Sub Domain 1
Ater interface
Sub Domain 2
LapD
Sub Domain 3
N/A
Measured Object
LapD
External Comment
1209 / 1392
24 MFS-GPRS Counters
NB_KBYTES_RECEIVED_FROM_BSC
Definition
Number of kilo bytes received from the BSC on the LapD link.
Trigger Condition
For each message received from the BSC on the LapD link, the counter is
incremented by the number of bytes of the message. The result is expressed
in kilo bytes.
Sub Domain 1
Ater interface
Sub Domain 2
LapD
Sub Domain 3
N/A
Measured Object
LapD
External Comment
1210 / 1392
24 MFS-GPRS Counters
24.4.3 Gb interface
24.4.3.1 All Gb interface
P43 - NB_DL_LLC_BYTES (Section 24.4.3.2.2.1 )
P44 - NB_UL_LLC_BYTES (Section 24.4.3.2.2.2 )
P45 - NB_KBYTES_RECEIVED_FROM_SGSN (Section 24.4.3.3.2.1 )
P45a - NB_KBYTES_RECEIVED_FROM_SGSN_GBIP (Section 24.4.3.4.2.1 )
P46 - NB_KBYTES_SENT_TO_SGSN (Section 24.4.3.3.2.2 )
P46a - NB_KBYTES_SENT_TO_SGSN_GBIP (Section 24.4.3.4.2.2 )
24.4.3.2.2 N/A
24.4.3.2.2.1 P43 - NB_DL_LLC_BYTES
Long Name
NB_DL_LLC_BYTES
Definition
Number of DL LLC bytes received from the SGSN at BSSGP level per cell.
Trigger Condition
Whenever the MFS receives a DL 08.18 UNITDATA from the SGSN to transmit to
the cell, the counter is incremented by the number of bytes of the LLC PDU(s).
Sub Domain 1
Gb interface
Sub Domain 2
BVC (Cell)
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1211 / 1392
24 MFS-GPRS Counters
NB_UL_LLC_BYTES
Definition
Number of UL LLC bytes received from the MS at BSSGP (08.18) sublayer per cell.
Trigger Condition
Sub Domain 1
Gb interface
Sub Domain 2
BVC (Cell)
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1212 / 1392
24 MFS-GPRS Counters
24.4.3.3 PVC
24.4.3.3.1 All PVC
P45 - NB_KBYTES_RECEIVED_FROM_SGSN (Section 24.4.3.3.2.1 )
P46 - NB_KBYTES_SENT_TO_SGSN (Section 24.4.3.3.2.2 )
24.4.3.3.2 N/A
24.4.3.3.2.1 P45 - NB_KBYTES_RECEIVED_FROM_SGSN
Long Name
NB_KBYTES_RECEIVED_FROM_SGSN
Definition
Trigger Condition
For each message received from the SGSN, the counter is incremented by the
number of bytes of the message. The result is expressed in kilo bytes.
Sub Domain 1
Gb interface
Sub Domain 2
PVC
Sub Domain 3
N/A
Measured Object
PVC
External Comment
1213 / 1392
24 MFS-GPRS Counters
NB_KBYTES_SENT_TO_SGSN
Definition
Trigger Condition
For each message sent to the SGSN, the counter is incremented by the number of
bytes of the message. The result is expressed in kilo bytes.
Sub Domain 1
Gb interface
Sub Domain 2
PVC
Sub Domain 3
N/A
Measured Object
PVC
External Comment
1214 / 1392
24 MFS-GPRS Counters
24.4.3.4 SGSN_IP_NSVC
24.4.3.4.1 All SGSN_IP_NSVC
P45a - NB_KBYTES_RECEIVED_FROM_SGSN_GBIP (Section 24.4.3.4.2.1 )
P46a - NB_KBYTES_SENT_TO_SGSN_GBIP (Section 24.4.3.4.2.2 )
24.4.3.4.2 N/A
24.4.3.4.2.1 P45a - NB_KBYTES_RECEIVED_FROM_SGSN_GBIP
Long Name
NB_KBYTES_RECEIVED_FROM_SGSN_GBIP
Definition
Trigger Condition
For each message received from the SGSN, the counter is incremented by the
number of bytes of the message. The result is expressed in kilo bytes.
Sub Domain 1
Gb interface
Sub Domain 2
SGSN_IP_NSVC
Sub Domain 3
N/A
Measured Object
SGSN_IP_NSVC
External Comment
1215 / 1392
24 MFS-GPRS Counters
NB_KBYTES_SENT_TO_SGSN_GBIP
Definition
Trigger Condition
For each message sent to the SGSN, the counter is incremented by the number of
bytes of the message. The result is expressed in kilo bytes.
Sub Domain 1
Gb interface
Sub Domain 2
SGSN_IP_NSVC
Sub Domain 3
N/A
Measured Object
SGSN_IP_NSVC
External Comment
1216 / 1392
24 MFS-GPRS Counters
1217 / 1392
24 MFS-GPRS Counters
1218 / 1392
24 MFS-GPRS Counters
1219 / 1392
24 MFS-GPRS Counters
1220 / 1392
24 MFS-GPRS Counters
24.4.4.2 AGCH
24.4.4.2.1 All AGCH
P49 - NB_IMM_ASS_AGCH (Section 24.4.4.2.2.1 )
24.4.4.2.2 N/A
24.4.4.2.2.1 P49 - NB_IMM_ASS_AGCH
Long Name
NB_IMM_ASS_AGCH
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
AGCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1221 / 1392
24 MFS-GPRS Counters
24.4.4.3.2 N/A
24.4.4.3.2.1 P10 - NB_DL_LLC_BYTES_DISC_CONG
Long Name
NB_DL_LLC_BYTES_DISC_CONG
Definition
Trigger Condition
1) Whenever the PDU life time of a DL LLC PDU expires, the counter is
incremented by the number of bytes of the LLC PDU. 2) Whenever the MFS
receives a DL LLC PDU and the buffer in reception on the Gb interface is full, the
counter is incremented by the number of bytes of the LLC PDU to discard.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1222 / 1392
24 MFS-GPRS Counters
NB_DL_LLC_BYTES_GPRS_ACK
Definition
Number of DL LLC bytes that have been transmitted and acknowledged by the
RLC layer on DL TBFs established in GPRS mode and RLC acknowledged mode.
Trigger Condition
Whenever the RRM layer is informed that an DL LLC PDU has been correctly
received by the MS on a DL TBF established in GPRS mode and RLC
acknowledged mode, the counter is incremented by the number of bytes of the
corresponding DL LLC PDU.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1223 / 1392
24 MFS-GPRS Counters
NB_DL_LLC_BYTES_GPRS_NACK
Definition
Number of DL LLC bytes that have been transmitted by the RLC layer on DL TBFs
established in GPRS mode and RLC unacknowledged mode.
Trigger Condition
Whenever the RRM layer is informed that an DL LLC PDU has been correctly
transmitted to the MS on a DL TBF established in GPRS mode and RLC
unacknowledged mode, the counter is incremented by the number of bytes of the
corresponding DL LLC PDU.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1224 / 1392
24 MFS-GPRS Counters
NB_DL_LLC_BYTES_EGPRS_ACK
Definition
Number of DL LLC bytes that have been transmitted and acknowledged by the RLC
layer on DL TBFs established in EGPRS mode and RLC acknowledged mode.
Trigger Condition
Whenever the RRM layer is informed that an DL LLC PDU has been correctly
received by the MS on a DL TBF established in EGPRS mode and RLC
acknowledged mode, the counter is incremented by the number of bytes of the
corresponding DL LLC PDU.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1225 / 1392
24 MFS-GPRS Counters
NB_DL_LLC_BYTES_EGPRS_NACK
Definition
Number of DL LLC bytes that have been transmitted by the RLC layer on DL TBFs
established in EGPRS mode and RLC unacknowledged mode.
Trigger Condition
Whenever the RRM layer is informed that a DL LLC PDU has been correctly
transmitted to the MS on a DL TBF established in GPRS mode and RLC
unacknowledged mode, the counter is incremented by the number of bytes of the
corresponding DL LLC PDU.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1226 / 1392
24 MFS-GPRS Counters
NB_DL_PDU_TRANSMITTED
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1227 / 1392
24 MFS-GPRS Counters
NB_DL_LLC_BYTES_REROUTED
Definition
Number of DL LLC bytes rerouted (i.e. sent) from cell to another one.
Trigger Condition
Flush message received in the serving cell with rerouting conditions fulfilled.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1228 / 1392
24 MFS-GPRS Counters
NB_DL_LLC_BYTES_NOT_REROUTED
Definition
Trigger Condition
Flush message received in the serving cell with rerouting conditions not fulfilled.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1229 / 1392
24 MFS-GPRS Counters
NB_DL_LLC_BYTES_REROUTED_RECEIVED
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1230 / 1392
24 MFS-GPRS Counters
NB_LLC_BYTES_DISC_SUSPEND
Definition
Trigger Condition
Suspend message received from BSC while DL PDUs are stored by RRM for this
mobile. Queued PDUs or incoming PDUs received until suspend ack reception
from SGSN are deleted. The counter is expressed in "bytes".
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1231 / 1392
24 MFS-GPRS Counters
24.4.4.4 DL PACCH
24.4.4.4.1 All DL PACCH
P438b - SIG_BLKS_NC2_DL_PACCH_PTM_LOAD (Section 24.4.4.4.2.1 )
P457 - NB_PSI_MES (Section 24.4.4.4.2.2 )
P459 - NB_NEIGH_PSI_MES (Section 24.4.4.4.2.3 )
P59 - NB_DL_RLC_BLOCK_PACCH (Section 24.4.4.4.2.4 )
24.4.4.4.2 N/A
24.4.4.4.2.1 P438b - SIG_BLKS_NC2_DL_PACCH_PTM_LOAD
Long Name
SIG_BLKS_NC2_DL_PACCH_PTM_LOAD
Definition
Trigger Condition
The counter is incremented whenever the MFS sends a DL RLC control block on
PACCH/D due to the NC2 mode of operation for MS in packet transfer mode.
Therefore, this counter shall count the following downlink messages: - Packet
Measurement Order - Packet Cell Change Order.
Sub Domain 1
Radio interface
Sub Domain 2
DL PACCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1232 / 1392
24 MFS-GPRS Counters
NB_PSI_MES
Definition
Signalling load induced in the cell by the procedure of broadcast of (P)SI messages
Trigger Condition
Number of RLC blocks used : 1) To broadcast a PSI message for Packet PSI
Status feature 2) To send a PACKET SERVING CELL DATA message for Packet
SI Status feature.
Sub Domain 1
Radio interface
Sub Domain 2
DL PACCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1233 / 1392
24 MFS-GPRS Counters
NB_NEIGH_PSI_MES
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
DL PACCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1234 / 1392
24 MFS-GPRS Counters
NB_DL_RLC_BLOCK_PACCH
Definition
Number of DL RLC blocks sent on PACCH (excluding the dummy blocks). The
retransmitted blocks are counted.
Trigger Condition
Whenever the MFS sends a DL RLC Block (different from a dummy block) on
PACCH (RLC/MAC control messages). Note : PSCD/PNCD blocks are not taken
into account.
Sub Domain 1
Radio interface
Sub Domain 2
DL PACCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1235 / 1392
24 MFS-GPRS Counters
1236 / 1392
24 MFS-GPRS Counters
24.4.4.5.2 N/A
24.4.4.5.2.1 P20a - NB_DL_RLC_BLOCK_PDTCH_RETRANS_CS1
Long Name
NB_DL_RLC_BLOCK_PDTCH_RETRANS_CS1
Definition
Trigger Condition
Whenever a DL 04.60 RLC DATA BLOCK (in NACK state within the emission
window) on PDTCH encoded in CS-1 is retransmitted to the MS. The
retransmissions of DL RLC DATA blocks in PENDING status within the emission
window are not counted (these blocks may be re-transmitted at the end of a TBF
to speed up the release). In unacknowledged mode, P20a is equal to 0 (no
retransmission). Note that RLC blocks containing LLC Dummy UI Commands
only and that can be inserted by RLC to delay the release of the DL TBF are
not taken into account.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1237 / 1392
24 MFS-GPRS Counters
NB_DL_RLC_BLOCK_PDTCH_RETRANS_CS2
Definition
Trigger Condition
Whenever a DL 04.60 RLC DATA BLOCK (in NACK state within the emission
window) on PDTCH encoded in CS-2 is retransmitted to the MS. The
retransmissions of DL RLC DATA blocks in PENDING status within the emission
window are not counted (these blocks may be re-transmitted at the end of a TBF
to speed up the release). In unacknowledged mode, the counter is equal to 0 (no
retransmission). Note that RLC blocks containing LLC Dummy UI Commands
only and that can be inserted by RLC to delay the release of the DL TBF are
not taken into account.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1238 / 1392
24 MFS-GPRS Counters
NB_DL_RLC_BLOCK_PDTCH_RETRANS_CS3
Definition
Trigger Condition
Whenever a DL 04.60 RLC DATA BLOCK (in NACK state within the emission
window) on PDTCH encoded in CS-3 is retransmitted to the MS. The
retransmissions of DL RLC DATA blocks in PENDING status within the transmit
window are not counted (these blocks may be re-transmitted at the end of a TBF
to speed up the release). In unacknowledged mode, P20c is equal to 0 (no
retransmission). Note 1: This counter does not count the blocks re-transmitted
at the end of a TBF to speed up the release or when the RLC transmit window
is stalled. Note 2: This counter does not count the RLC blocks containing LLC
Dummy UI Commands that can be inserted by RLC to delay the release of the
DL TBF.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1239 / 1392
24 MFS-GPRS Counters
NB_DL_RLC_BLOCK_PDTCH_RETRANS_CS4
Definition
Trigger Condition
Whenever a DL 04.60 RLC DATA BLOCK (in NACK state within the emission
window) on PDTCH encoded in CS-4 is retransmitted to the MS. The
retransmissions of DL RLC DATA blocks in PENDING status within the transmit
window are not counted (these blocks may be re-transmitted at the end of a TBF
to speed up the release). In unacknowledged mode, P20d is equal to 0 (no
retransmission). Note 1: This counter does not count the blocks re-transmitted
at the end of a TBF to speed up the release or when the RLC transmit window
is stalled. Note 2: This counter does not count the RLC blocks containing LLC
Dummy UI Commands that can be inserted by RLC to delay the release of the
DL TBF.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1240 / 1392
24 MFS-GPRS Counters
NB_DL_RLC_BLOCK_PDTCH_RETRANS_MCS1
Definition
Trigger Condition
Whenever a DL 04.60 RLC DATA BLOCK (in NACK state within the emission
window) on PDTCH encoded in MCS-1 is retransmitted to the MS, the counter is
incremented . The retransmissions of DL RLC DATA blocks in PENDING status
within the transmit window are not counted. In unacknowledged mode, the counter
is equal to 0 (no retransmission). Note 1: This counter does not count the RLC
blocks re-transmitted at the end of a TBF to speed up the release or when the RLC
transmit window is stalled. Note 2: This counter does not count the RLC blocks
containing LLC Dummy UI Commands that can be inserted by RLC to delay the
release of the DL TBF.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1241 / 1392
24 MFS-GPRS Counters
NB_DL_RLC_BLOCK_PDTCH_RETRANS_MCS2
Definition
Trigger Condition
Whenever a DL 04.60 RLC DATA BLOCK (in NACK state within the emission
window) on PDTCH encoded in MCS-2 is retransmitted to the MS, the counter is
incremented . The retransmissions of DL RLC DATA blocks in PENDING status
within the transmit window are not counted. In unacknowledged mode, the counter
is equal to 0 (no retransmission). Note 1: This counter does not count the RLC
blocks re-transmitted at the end of a TBF to speed up the release or when the RLC
transmit window is stalled. Note 2: This counter does not count the RLC blocks
containing LLC Dummy UI Commands that can be inserted by RLC to delay the
release of the DL TBF.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1242 / 1392
24 MFS-GPRS Counters
NB_DL_RLC_BLOCK_PDTCH_RETRANS_MCS3
Definition
Trigger Condition
Whenever a DL 04.60 RLC DATA BLOCK (in NACK state within the emission
window) on PDTCH encoded in MCS-3 is retransmitted to the MS, the counter is
incremented . The retransmissions of DL RLC DATA blocks in PENDING status
within the transmit window are not counted. In unacknowledged mode, the counter
is equal to 0 (no retransmission). Note 1: This counter does not count the RLC
blocks re-transmitted at the end of a TBF to speed up the release or when the RLC
transmit window is stalled. Note 2: This counter does not count the RLC blocks
containing LLC Dummy UI Commands that can be inserted by RLC to delay the
release of the DL TBF.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1243 / 1392
24 MFS-GPRS Counters
NB_DL_RLC_BLOCK_PDTCH_RETRANS_MCS4
Definition
Trigger Condition
Whenever a DL 04.60 RLC DATA BLOCK (in NACK state within the emission
window) on PDTCH encoded in MCS-4 is retransmitted to the MS, the counter is
incremented . The retransmissions of DL RLC DATA blocks in PENDING status
within the transmit window are not counted. In unacknowledged mode, the counter
is equal to 0 (no retransmission). Note 1: This counter does not count the RLC
blocks re-transmitted at the end of a TBF to speed up the release or when the RLC
transmit window is stalled. Note 2: This counter does not count the RLC blocks
containing LLC Dummy UI Commands that can be inserted by RLC to delay the
release of the DL TBF.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1244 / 1392
24 MFS-GPRS Counters
NB_DL_RLC_BLOCK_PDTCH_RETRANS_MCS5
Definition
Trigger Condition
Whenever a DL 04.60 RLC DATA BLOCK (in NACK state within the emission
window) on PDTCH encoded in MCS-5 is retransmitted to the MS, the counter is
incremented . The retransmissions of DL RLC DATA blocks in PENDING status
within the transmit window are not counted. In unacknowledged mode, the counter
is equal to 0 (no retransmission). Note 1: This counter does not count the RLC
blocks re-transmitted at the end of a TBF to speed up the release or when the RLC
transmit window is stalled. Note 2: This counter does not count the RLC blocks
containing LLC Dummy UI Commands that can be inserted by RLC to delay the
release of the DL TBF.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1245 / 1392
24 MFS-GPRS Counters
NB_DL_RLC_BLOCK_PDTCH_RETRANS_MCS6
Definition
Trigger Condition
Whenever a DL 04.60 RLC DATA BLOCK (in NACK state within the emission
window) on PDTCH encoded in MCS-6 is retransmitted to the MS, the counter is
incremented . The retransmissions of DL RLC DATA blocks in PENDING status
within the transmit window are not counted. In unacknowledged mode, the counter
is equal to 0 (no retransmission). Note 1: This counter does not count the RLC
blocks re-transmitted at the end of a TBF to speed up the release or when the RLC
transmit window is stalled. Note 2: This counter does not count the RLC blocks
containing LLC Dummy UI Commands that can be inserted by RLC to delay the
release of the DL TBF.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1246 / 1392
24 MFS-GPRS Counters
NB_DL_RLC_BLOCK_PDTCH_RETRANS_MCS7
Definition
Trigger Condition
Whenever a DL 04.60 RLC DATA BLOCK (in NACK state within the emission
window) on PDTCH encoded in MCS-7 is retransmitted to the MS, the counter is
incremented . The retransmissions of DL RLC DATA blocks in PENDING status
within the transmit window are not counted. In unacknowledged mode, the counter
is equal to 0 (no retransmission). Note 1: This counter does not count the RLC
blocks re-transmitted at the end of a TBF to speed up the release or when the RLC
transmit window is stalled. Note 2: This counter does not count the RLC blocks
containing LLC Dummy UI Commands that can be inserted by RLC to delay the
release of the DL TBF.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1247 / 1392
24 MFS-GPRS Counters
NB_DL_RLC_BLOCK_PDTCH_RETRANS_MCS8
Definition
Trigger Condition
Whenever a DL 04.60 RLC DATA BLOCK (in NACK state within the emission
window) on PDTCH encoded in MCS-8 is retransmitted to the MS, the counter is
incremented . The retransmissions of DL RLC DATA blocks in PENDING status
within the transmit window are not counted. In unacknowledged mode, the counter
is equal to 0 (no retransmission). Note 1: This counter does not count the RLC
blocks re-transmitted at the end of a TBF to speed up the release or when the RLC
transmit window is stalled. Note 2: This counter does not count the RLC blocks
containing LLC Dummy UI Commands that can be inserted by RLC to delay the
release of the DL TBF.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1248 / 1392
24 MFS-GPRS Counters
NB_DL_RLC_BLOCK_PDTCH_RETRANS_MCS9
Definition
Trigger Condition
Whenever a DL 04.60 RLC DATA BLOCK (in NACK state within the emission
window) on PDTCH encoded in MCS-9 is retransmitted to the MS, the counter is
incremented . The retransmissions of DL RLC DATA blocks in PENDING status
within the transmit window are not counted. In unacknowledged mode, the counter
is equal to 0 (no retransmission). Note 1: This counter does not count the RLC
blocks re-transmitted at the end of a TBF to speed up the release or when the RLC
transmit window is stalled. Note 2: This counter does not count the RLC blocks
containing LLC Dummy UI Commands that can be inserted by RLC to delay the
release of the DL TBF.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1249 / 1392
24 MFS-GPRS Counters
NB_DL_RADIO_BLOCK_PDTCH
Definition
Trigger Condition
The counter is incremented whenever the MFS sends a DL RLC/MAC data block
on PDTCH. Note that the RLC/MAC blocks containing LLC Dummy UI Commands
are also counted.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1250 / 1392
24 MFS-GPRS Counters
NB_DUMMY_RLC_DATA_BLOCKS
Definition
Number of RLC data blocks containing only Dummy LLC UI Command PDUs that
have been sent on the radio interface. Note: This counter applies to both GPRS
and EGPRS TBFs.
Trigger Condition
Each time one RLC data block is sent, if this RLC data block contains only Dummy
LLC UI Command PDUs, this counter is incremented. Note that both initial
transmissions and retransmissions are counted.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1251 / 1392
24 MFS-GPRS Counters
NB_USEFUL_DL_RLC_BLOCK_PDTCH_CS1
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1252 / 1392
24 MFS-GPRS Counters
NB_USEFUL_DL_RLC_BLOCK_PDTCH_CS2
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1253 / 1392
24 MFS-GPRS Counters
NB_USEFUL_DL_RLC_BLOCK_PDTCH_CS3
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1254 / 1392
24 MFS-GPRS Counters
NB_USEFUL_DL_RLC_BLOCK_PDTCH_CS4
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1255 / 1392
24 MFS-GPRS Counters
NB_USEFUL_DL_RLC_BLOCK_PDTCH_MCS1
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1256 / 1392
24 MFS-GPRS Counters
NB_USEFUL_DL_RLC_BLOCK_PDTCH_MCS2
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1257 / 1392
24 MFS-GPRS Counters
NB_USEFUL_DL_RLC_BLOCK_PDTCH_MCS3
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1258 / 1392
24 MFS-GPRS Counters
NB_USEFUL_DL_RLC_BLOCK_PDTCH_MCS4
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1259 / 1392
24 MFS-GPRS Counters
NB_USEFUL_DL_RLC_BLOCK_PDTCH_MCS5
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1260 / 1392
24 MFS-GPRS Counters
NB_USEFUL_DL_RLC_BLOCK_PDTCH_MCS6
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1261 / 1392
24 MFS-GPRS Counters
NB_USEFUL_DL_RLC_BLOCK_PDTCH_MCS7
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1262 / 1392
24 MFS-GPRS Counters
NB_USEFUL_DL_RLC_BLOCK_PDTCH_MCS8
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1263 / 1392
24 MFS-GPRS Counters
NB_USEFUL_DL_RLC_BLOCK_PDTCH_MCS9
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1264 / 1392
24 MFS-GPRS Counters
NB_DL_RLC_BYTES_PDTCH_LOST_CS
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1265 / 1392
24 MFS-GPRS Counters
NB_DL_RLC_BYTES_PDTCH_LOST_MCS
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1266 / 1392
24 MFS-GPRS Counters
24.4.4.6.2 N/A
24.4.4.6.2.1 P104 - NB_LLC_PDU_GPU
Long Name
NB_LLC_PDU_GPU
Definition
Number of LLC PDU transferred (UL+ DL), Sum of P74 and P75 (cell counters) for
each cells mapped on GPU.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
GPU load
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1267 / 1392
24 MFS-GPRS Counters
TIME_PTU_CPU_DSP_LOAD
Definition
This counter cumulates the time during which at least a DSP is in CPU load state.
Trigger Condition
During the granularity period, the cumulated time during which at least a DSP is
loaded is computed. The time is provided in seconds with one significant value
after the comma (i.e. ROUND(10x) / 10). Note : A DSP is said loaded when its
CPU load is > =DSP_LOAD_THR1 and < DSP_LOAD_THR2.
Sub Domain 1
Radio interface
Sub Domain 2
GPU load
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1268 / 1392
24 MFS-GPRS Counters
TIME_PTU_CPU_DSP_OVERLOAD
Definition
This counter cumulates the time during which at least a DSP is in CPU overload
state.
Trigger Condition
During the granularity period, the cumulated time during which at least a DSP is
overloaded is computed. The time is provided in seconds with one significant
value after the comma (i.e. ROUND(10x) / 10). Note : A DSP is said overloaded
when its CPU load is > =DSP_LOAD_THR2.
Sub Domain 1
Radio interface
Sub Domain 2
GPU load
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1269 / 1392
24 MFS-GPRS Counters
Time_DSP_Cong
Definition
Trigger Condition
The counter is started when a DSP of a GPU enters the congestion state
because one of the following conditions is met: i) the maximum number of
GCHs that can be handled by a DSP is reached (MAX_GCH_DSP value N_ATER_TS_MARGIN_GPU value) , ii) the maximum number of TRXs that can
be handled by a DSP is reached (MAX_TRX_DSP value) , iii) the maximum
number of TBFs that can be handled by a DSP is reached (MAX_TBF_DSP value)
, iv) the maximum number of PDCHs that can be handled by a DSP is reached
(MAX_PDCH_DSP value) , v) the percentage of RLC memory resources used
within a DSP does not allow to serve new TBF (on this DSP) (current DSP memory
congestion state is different from NO_CONGESTION). The counter is stopped:
when all the DSP have left the congestion state.
Sub Domain 1
Radio interface
Sub Domain 2
GPU load
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1270 / 1392
24 MFS-GPRS Counters
NB_PS_PAGING_REQ_GPU
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
GPU load
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1271 / 1392
24 MFS-GPRS Counters
NB_CS_PAGING_REQ_GPU
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
GPU load
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1272 / 1392
24 MFS-GPRS Counters
AV_NB_MS_CONTEXTS
Definition
Trigger Condition
The number of contexts of MS (in RRM) is observed at each GAUGE polling value.
At the end of the granularity period, the value is averaged.
Sub Domain 1
Radio interface
Sub Domain 2
GPU load
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1273 / 1392
24 MFS-GPRS Counters
MAX_NB_MS_CONTEXTS
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
GPU load
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1274 / 1392
24 MFS-GPRS Counters
TIME_PMU_OVERLOAD
Definition
Cumulative time during which the GPU stays in the PMU CPU overload state due
to PMU CPU power limitations.
Trigger Condition
The counter is: - Starts when the GPU enters the PMU CPU overload state,
i.e. when the PMU CPU power budget is strictly higher than the threshold
PMU_CPU_Overload. - Stops when the GPU leaves the PMU CPU overload
state, i.e. when the PMU CPU power budget is below or equal to the threshold
PMU_CPU_Overload
Sub Domain 1
Radio interface
Sub Domain 2
GPU load
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1275 / 1392
24 MFS-GPRS Counters
NB_GPRS_SESSIONS
Definition
Trigger Condition
A (E)GPRS session starts when for one mobile station, there was no on-going
TBF and one TBF is established. It ends when for that mobile station, there was
one (or two) on-going TBF(s) and one (or both) is (are) released and T3192 is
no longer running. During a session, TBFs may be established and released in
both directions provided there is always at least one direction for which there is
an on-going TBF or T3192 is running. The detailed triggers are described below:
1) if an MS has got no TBF established and a DL or UL TBF is established then
the session starts when the first RLC data block is sent or received on that TBF;
2) in case an MS has got an UL TBF only, the current session ends when the
last UL RLC data block is received (and no retransmission is required in RLC
acknowledged mode); 3) in case an MS has got a DL TBF only, the current session
ends when the final (EGPRS) PACKET DOWNLINK ACK/NACK is received and no
retransmission is required in RLC acknowledged mode, if T3192 is not started (i.e.
T3192 = 0); 4) in case an MS has got a DL TBF only, the final (EGPS) PACKET
DOWNLINK ACK/NACK is received and no retransmission is required in RLC
acknowledged mode, if T3192 is started, the session continues; 5) in case an MS
has got a DL (resp UL) TBF on-going and an UL (resp DL) TBF is established,
then the session continues; 6) in case an MS has got both a DL and an UL TBFs
on-going and one of the TBFs gets released, then the session continues; 7) in case
an MS has got both a DL and an UL TBFs on-going and both TBFs are released
at the same time, but the timer T3192 is started, then the session continues
(otherwise if T3192=0, then the session ends); 8) in case an MS has got no TBF
established, T3192 is running and reaches its expiry value, the session ends.
Sub Domain 1
Radio interface
Sub Domain 2
GPU load
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1276 / 1392
24 MFS-GPRS Counters
AV_PMU_CPU_POWER_BUDGET
Definition
Average PMU CPU power budget observed during the granularity period.
Trigger Condition
The counter is the average value of all the samples of the PMU CPU power budget
over the granularity period.
Sub Domain 1
Radio interface
Sub Domain 2
GPU load
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1277 / 1392
24 MFS-GPRS Counters
MAX_PMU_CPU_POWER_BUDGET
Definition
Maximum value of the PMU CPU power budget observed during the granularity
period.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
GPU load
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1278 / 1392
24 MFS-GPRS Counters
24.4.4.7.2 N/A
24.4.4.7.2.1 P310a - NB_STALL_IND_MS_GPRS
Long Name
NB_STALL_IND_MS_GPRS
Definition
Trigger Condition
Detected transitions from SI=0 to SI=1 for an GPRS uplink TBF (stall indications
from the MS).
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1279 / 1392
24 MFS-GPRS Counters
NB_STALL_IND_MS_EGPRS
Definition
Trigger Condition
Detected transitions from SI=0 to SI=1 for an EGPRS uplink TBF (stall indications
from the MS).
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1280 / 1392
24 MFS-GPRS Counters
NB_STALL_STATE_GPRS_DL_TBF
Definition
Number of times the MFS RLC transmit window enters the stall state for a GPRS
DL TBF.
Trigger Condition
Whenever the MFS RLC transmit window enters the stall state for a GPRS DL TBF.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1281 / 1392
24 MFS-GPRS Counters
NB_STALL_STATE_EGPRS_DL_TBF
Definition
Number of times the MFS RLC transmit window enters the stall state for an
EGPRS DL TBF.
Trigger Condition
Whenever the MFS RLC transmit window enters the stall state for an EGPRS
DL TBF.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1282 / 1392
24 MFS-GPRS Counters
AV_DL_TX_EFF_GPRS
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1283 / 1392
24 MFS-GPRS Counters
AV_UL_TX_EFF_GPRS
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1284 / 1392
24 MFS-GPRS Counters
NB_DL_CS_ADAPT_INCREASE
Definition
Trigger Condition
The counter is incremented whenever the RLC layer triggers a change of coding
scheme towards a less robust coding scheme in the downlink direction for a
GPRS TBF. Note 1: This counter is never incremented when the data transfer is
resumed while the DL TBF is in DL TBF delayed. Note 2: This counter does not
apply to EGPRS TBFs.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1285 / 1392
24 MFS-GPRS Counters
NB_DL_CS_ADAPT_DECREASE
Definition
Trigger Condition
The counter is incremented whenever the RLC layer triggers a change of coding
scheme towards a more robust coding scheme in the downlink direction (with
the exception below) for a GPRS TBF. Although the coding scheme may be
changed to become more robust, this counter is not incremented in the following
situations: - When entering the delayed DL TBF release state to send Dummy
UI Command, - When ordered by the RRM layer (e.g. in reallocation when old
and new TRX having different radio configuration), - When a consecutive lost of
04.60 PACKET DOWNLINK ACK/NACK messages is detected, - When the data
transfer is resumed while the DL TBF is in DL TBF delayed state. Note: This
counter does not apply to EGPRS TBFs.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1286 / 1392
24 MFS-GPRS Counters
NB_UL_CS_ADAPT_INCREASE
Definition
Trigger Condition
The counter is incremented whenever the RLC layer triggers a change of coding
scheme towards a less robust coding scheme in the uplink direction for a GPRS
TBF. Note: This counter does not apply to EGPRS TBFs.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1287 / 1392
24 MFS-GPRS Counters
NB_UL_CS_ADAPT_DECREASE
Definition
Trigger Condition
The counter is incremented whenever the RLC layer triggers a change of coding
scheme towards a more robust coding scheme in the uplink direction for a GPRS
TBF. Although the coding scheme may be changed to become more robust, this
counter is not incremented in the following situations: - When ordered by the
RRM layer (e.g. in reallocation when old and new TRX having different radio
configuration), - When the network receives an invalid UL RLC data block or
nothing from the MS a certain number of times. Note: This counter does not
apply to EGPRS TBFs.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1288 / 1392
24 MFS-GPRS Counters
24.4.4.8 MS capability
24.4.4.8.1 All MS capability
P450a - NB_R97_R98_MS_CONTEXT_GPU (Section 24.4.4.8.2.1 )
P450b - NB_GPRS_R99_MS_CONTEXT_GPU (Section 24.4.4.8.2.2 )
P450c - NB_EGPRS_R99_MS_CONTEXT_GPU (Section 24.4.4.8.2.3 )
P450d - NB_MS_CONTEXT_GPU (Section 24.4.4.8.2.4 )
P450e - NB_GERAN_FEATURE_PACK1_MS_CONTEXT_GPU (Section
24.4.4.8.2.5 )
P530a_1 - NB_MS_MULTISLOT_CLASS_0_TO_10 (Section 24.4.4.8.2.6 )
P530a_2 - NB_MS_MULTISLOT_CLASS_11_TO_12 (Section 24.4.4.8.2.7 )
P530a_3 - NB_MS_MULTISLOT_CLASS_3X (Section 24.4.4.8.2.8 )
P530a_4 - NB_MS_MULTISLOT_CLASS_4X (Section 24.4.4.8.2.9 )
P530a_5 - NB_MS_MULTISLOT_CLASS_30_TO_34 (Section 24.4.4.8.2.10 )
P530b_5 - NB_MS_MULTISLOT_CLASS_31_TO_34 (Section 24.4.4.8.2.11 )
24.4.4.8.2 N/A
24.4.4.8.2.1 P450a - NB_R97_R98_MS_CONTEXT_GPU
Long Name
NB_R97_R98_MS_CONTEXT_GPU
Definition
Trigger Condition
The counter is incremented the first time the MS radio access capability is received
for a given MS context in the GPU and indicates that the MS is compliant to the
3GPP standard Releases 1997 or 1998.
Sub Domain 1
Radio interface
Sub Domain 2
MS capability
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1289 / 1392
24 MFS-GPRS Counters
NB_GPRS_R99_MS_CONTEXT_GPU
Definition
Trigger Condition
The counter is incremented the first time the MS radio access capability is received
for a given MS context in the GPU and indicates that the MS is non-EGPRS
capable and compliant to the 3GPP standard Release 1999 onwards.
Sub Domain 1
Radio interface
Sub Domain 2
MS capability
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1290 / 1392
24 MFS-GPRS Counters
NB_EGPRS_R99_MS_CONTEXT_GPU
Definition
Trigger Condition
The counter is incremented the first time the MS radio access capability is received
for a given MS context in the GPU and indicates that the MS is EGPRS capable
and compliant to the 3GPP standard Release 1999 onwards.
Sub Domain 1
Radio interface
Sub Domain 2
MS capability
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1291 / 1392
24 MFS-GPRS Counters
NB_MS_CONTEXT_GPU
Definition
Trigger Condition
The counter is incremented the first time the MS Radio Access Capability is
received for a given MS context Note : This counter is incremented whatever the
MS release or feature supported by the MS.
Sub Domain 1
Radio interface
Sub Domain 2
MS capability
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1292 / 1392
24 MFS-GPRS Counters
NB_GERAN_FEATURE_PACK1_MS_CONTEXT_GPU
Definition
Trigger Condition
The counter is incremented the first time the MS radio access capability is
received for a given MS context and indicates that the MS supports the Geran
feature package 1.
Sub Domain 1
Radio interface
Sub Domain 2
MS capability
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1293 / 1392
24 MFS-GPRS Counters
NB_MS_MULTISLOT_CLASS_0_TO_10
Definition
Number of MS contexts created for MS whose multislot class belongs to the set of
multislot classes 0 to 10.
Trigger Condition
The counter is incremented the first time the MS radio access capability is
received for a given MS context and indicates that the MS multislot class belongs
to the set of multislot classes 0 to 10. Note : - In the MS Radio Access Capability
parameter, only the GPRS multislot class, EGPRS multislot class , and High
Multislot Capability fields are taken into account if available. -If several multislot
class are available for the same MS (e-g GPRS MS class, EDGE MS class), then
only one will be taken into consideration to increment the proper counter, based
on the following priorities in decreasing order: 0-> EGPRS high multislot class, 1->
EGPRS multislot class, 2-> GPRS high multislot class, 3-> GPRS multislot class.
Sub Domain 1
Radio interface
Sub Domain 2
MS capability
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1294 / 1392
24 MFS-GPRS Counters
NB_MS_MULTISLOT_CLASS_11_TO_12
Definition
Number of MS contexts created for MS whose multislot class belongs to the set
of multislot classes 11 to 12.
Trigger Condition
The counter is incremented the first time the MS radio access capability is received
for a given MS context and indicates that the MS multislot class belongs to the
set of multislot classes 11 to 12. Note : - In the MS Radio Access Capability
parameter, only the GPRS multislot class, EGPRS multislot class , and High
Multislot Capability fields are taken into account if available. -If several multislot
class are available for the same MS (e-g GPRS MS class, EDGE MS class), then
only one will be taken into consideration to increment the proper counter, based
on the following priorities in decreasing order: 0-> EGPRS high multislot class, 1->
EGPRS multislot class, 2-> GPRS high multislot class, 3-> GPRS multislot class.
Sub Domain 1
Radio interface
Sub Domain 2
MS capability
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1295 / 1392
24 MFS-GPRS Counters
NB_MS_MULTISLOT_CLASS_3X
Definition
Number of MS contexts created for MS whose multislot class belongs to the set of
multislot classes of type 3X .
Trigger Condition
The counter is incremented the first time the MS radio access capability is received
for a given MS context and indicates that the MS multislot class belongs to the
set of multislot classes of type 3X. Note : - In the MS Radio Access Capability
parameter, only the GPRS multislot class, EGPRS multislot class , and High
Multislot Capability fields are taken into account if available. -If several multislot
class are available for the same MS (e-g GPRS MS class, EDGE MS class), then
only one will be taken into consideration to increment the proper counter, based
on the following priorities in decreasing order: 0-> EGPRS high multislot class, 1->
EGPRS multislot class, 2-> GPRS high multislot class, 3-> GPRS multislot class.
Sub Domain 1
Radio interface
Sub Domain 2
MS capability
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1296 / 1392
24 MFS-GPRS Counters
NB_MS_MULTISLOT_CLASS_4X
Definition
Number of MS contexts created for MS whose multislot class belongs to the set of
multislot classes of type 4X .
Trigger Condition
The counter is incremented the first time the MS radio access capability is received
for a given MS context and indicates that the MS multislot class belongs to the
set of multislot classes of type 4X. Note : - In the MS Radio Access Capability
parameter, only the GPRS multislot class, EGPRS multislot class , and High
Multislot Capability fields are taken into account if available. -If several multislot
class are available for the same MS (e-g GPRS MS class, EDGE MS class), then
only one will be taken into consideration to increment the proper counter, based
on the following priorities in decreasing order: 0-> EGPRS high multislot class, 1->
EGPRS multislot class, 2-> GPRS high multislot class, 3-> GPRS multislot class.
Sub Domain 1
Radio interface
Sub Domain 2
MS capability
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1297 / 1392
24 MFS-GPRS Counters
NB_MS_MULTISLOT_CLASS_30_TO_34
Definition
Number of MS contexts created for MS whose (PTM) high multislot class belongs
to 30-34.
Trigger Condition
The counter is incremented the first time the MS radio access capability is received
for a given MS context and indicates that the MS (PTM) high multislot class
belongs to 30-34. Note : - In the MS Radio Access Capability parameter, only the
GPRS multislot class, EGPRS multislot class, and High Multislot Capability fields
are taken into account if available. -If several multislot classes are available for the
same MS, then only one will be taken into consideration to increment the proper
counter, based on the following priorities in decreasing order: 0-> EGPRS high
multislot class, 1-> EGPRS multislot class, 2-> GPRS high multislot class, 3->
GPRS multislot class.
Sub Domain 1
Radio interface
Sub Domain 2
MS capability
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1298 / 1392
24 MFS-GPRS Counters
NB_MS_MULTISLOT_CLASS_31_TO_34
Definition
Number of MS contexts created for MS whose DTM high multislot class belongs
to 31-34.
Trigger Condition
The counter is incremented the first time the MS radio access capability is received
for a given MS context and indicates that the MS DTM high multislot class belongs
to 31-34. Note : - In the MS Radio Access Capability parameter, only the DTM
GPRS high multislot class and DTM EGPRS high multislot class fields are taken
into account if available. -If DTM GPRS and EGPRS high multislot classes are
available for the same MS, then only one will be taken into consideration, based on
the following priorities in decreasing order: 0-> DTM EGPRS high multislot class,
1-> DTM GPRS high multislot class,
Sub Domain 1
Radio interface
Sub Domain 2
MS capability
Sub Domain 3
N/A
Measured Object
Sub_BSS (BSC/FABRIC)
External Comment
1299 / 1392
24 MFS-GPRS Counters
24.4.4.9 PAGCH
24.4.4.9.1 All PAGCH
P400 - SIG_BLKS_PAGCH_LOAD (Section 24.4.4.9.2.1 )
24.4.4.9.2 N/A
24.4.4.9.2.1 P400 - SIG_BLKS_PAGCH_LOAD
Long Name
SIG_BLKS_PAGCH_LOAD
Definition
Dedicated PAGCH signalling load on all the existing MPDCHs. The dedicated
PAGCH signalling load represents the number of blocks dedicated to Packet Uplink
Assignment and Packet Access Reject messages over the granularity period.
It evaluated as the weighted sum of these messages sent over the granularity
period. A weight of 1 is given to the Packet UL Assignment messages sent on
PAGCH or PPCH. A weight of 0.5 (assuming that 2 access rejects are gathered
in one single block) is given to a Packet Access Reject sent either on PAGCH or
PPCH. Note that the Packet UL Assignment and Packet Access Reject messages
sent on PPCH are counted with P400.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PAGCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1300 / 1392
24 MFS-GPRS Counters
24.4.4.10 PCH
24.4.4.10.1 All PCH
P53a - NB_PS_PAGING_REQ_PCH (Section 24.4.4.10.2.1 )
P53b - NB_CS_PAGING_REQ_PCH (Section 24.4.4.10.2.2 )
P53c - NB_IMM_ASS_PCH (Section 24.4.4.10.2.3 )
24.4.4.10.2 N/A
24.4.4.10.2.1 P53a - NB_PS_PAGING_REQ_PCH
Long Name
NB_PS_PAGING_REQ_PCH
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1301 / 1392
24 MFS-GPRS Counters
NB_CS_PAGING_REQ_PCH
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1302 / 1392
24 MFS-GPRS Counters
NB_IMM_ASS_PCH
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1303 / 1392
24 MFS-GPRS Counters
24.4.4.11 PPCH
24.4.4.11.1 All PPCH
P61 - SIG_BLKS_PPCH_LOAD (Section 24.4.4.11.2.1 )
P61a - NB_PACK_PS_PAGING_REQ_PPCH (Section 24.4.4.11.2.2 )
P61b - NB_PACK_CS_PAGING_REQ_PPCH (Section 24.4.4.11.2.3 )
24.4.4.11.2 N/A
24.4.4.11.2.1 P61 - SIG_BLKS_PPCH_LOAD
Long Name
SIG_BLKS_PPCH_LOAD
Definition
Dedicated PPCH signalling load on all the existing MPDCHs. The dedicated
PPCH signalling load represents the number of PPCH blocks dedicated to CS/PS
Paging requests and Packet Downlink Assignment messages over the granularity
period. It is evaluated as the weighted sum of these messages sent over the
granularity period. A weight of 0.5 (assuming that 2 paging requests are gathered
in one single block) is given to a CS and PS paging sent on PPCH. A weight of
1 is given to the Packet DL Assignment messages sent on PPCH (in DRX and
non DRX mode). Note that the Packet UL Assignment and Packet Access Reject
messages sent on PPCH are not counted with P61, but with P400.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PPCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1304 / 1392
24 MFS-GPRS Counters
NB_PACK_PS_PAGING_REQ_PPCH
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PPCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1305 / 1392
24 MFS-GPRS Counters
NB_PACK_CS_PAGING_REQ_PPCH
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PPCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1306 / 1392
24 MFS-GPRS Counters
24.4.4.12 PRACH
24.4.4.12.1 All PRACH
P399 - SIG_BLKS_PRACH_LOAD (Section 24.4.4.12.2.1 )
P438d - SIG_BLKS_NC2_PRACH_LOAD (Section 24.4.4.12.2.2 )
24.4.4.12.2 N/A
24.4.4.12.2.1 P399 - SIG_BLKS_PRACH_LOAD
Long Name
SIG_BLKS_PRACH_LOAD
Definition
PRACH signalling load (expressed in blocks) on all the existing MPDCHs. The
PRACH signalling load is the weighted sum of the used PRACH bursts over the
granularity period. A weight of 0.25 (4 bursts per block) is given to a PRACH burst
occurrence carrying a (EGPRS) Packet Channel Request, whereas a weight of
0.5 (1 collision = 2 MS attempts) is given to a PRACH burst occurrence on which a
collision has been detected.
Trigger Condition
The counter is updated whenever RRM receives from MAC the internal primitive
PRH-PRACH-COLLISION-REPORT-cnf indicating the number of PRACH burst
occurrences carrying a (EGPRS) Packet Channel Request message, and the
number of PRACH occurrences on which a collision has been detected. Remark:
The primitive PRH-PRACH-COLLISION-REPORT-cnf is regularly sent by the
PTU (on PMU demand).
Sub Domain 1
Radio interface
Sub Domain 2
PRACH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1307 / 1392
24 MFS-GPRS Counters
SIG_BLKS_NC2_PRACH_LOAD
Definition
Number of Packet Channel Request messages with cause "Single block access
without TBF establishment".
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
PRACH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1308 / 1392
24 MFS-GPRS Counters
24.4.4.13.2 N/A
24.4.4.13.2.1 P23 - NB_UL_LLC_BYTES_DISC_CONG
Long Name
NB_UL_LLC_BYTES_DISC_CONG
Definition
Number of UL LLC bytes discarded due to congestion in the SNS sublayer (the
MS is obviously in packet transfer mode UL).
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
PVC
External Comment
1309 / 1392
24 MFS-GPRS Counters
NB_UL_LLC_BYTES_GPRS_ACK
Definition
Trigger Condition
Whenever the RRM layer receives an UL LLC PDU from the RLC layer on an UL
TBF established in GPRS mode and RLC acknowledged mode, the counter is
incremented by the number of bytes of the received UL LLC PDU.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1310 / 1392
24 MFS-GPRS Counters
NB_UL_LLC_BYTES_GPRS_NACK
Definition
Trigger Condition
Whenever the RRM layer receives an UL LLC PDU from the RLC layer on an UL
TBF established in GPRS mode and RLC unacknowledged mode, the counter is
incremented by the number of bytes of the received UL LLC PDU.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1311 / 1392
24 MFS-GPRS Counters
NB_UL_LLC_BYTES_EGPRS_ACK
Definition
Trigger Condition
Whenever the RRM layer receives an UL LLC PDU from the RLC layer on an UL
TBF established in EGPRS mode and RLC acknowledged mode, the counter is
incremented by the number of bytes of the received UL LLC PDU.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1312 / 1392
24 MFS-GPRS Counters
NB_UL_LLC_BYTES_EGPRS_NACK
Definition
Trigger Condition
Whenever the RRM layer receives an UL LLC PDU from the RLC layer on an UL
TBF established in EGPRS mode and RLC unacknowledged mode, the counter is
incremented by the number of bytes of the received UL LLC PDU.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1313 / 1392
24 MFS-GPRS Counters
NB_UL_PDU_TRANSMITTED
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1314 / 1392
24 MFS-GPRS Counters
24.4.4.14 UL PACCH
24.4.4.14.1 All UL PACCH
P401 - SIG_BLKS_PACCH_UL_LOAD (Section 24.4.4.14.2.1 )
P438a - SIG_BLKS_NC2_UL_PACCH_PTM_LOAD (Section 24.4.4.14.2.2 )
P438c - SIG_BLKS_NC2_UL_PACCH_CCCH_LOAD (Section 24.4.4.14.2.3 )
P439 - SIG_BLKS_UL_PACCH_CCCH_PRR_LOAD (Section 24.4.4.14.2.4 )
P60 - NB_UL_RLC_BLOCK_PACCH (Section 24.4.4.14.2.5 )
24.4.4.14.2 N/A
24.4.4.14.2.1 P401 - SIG_BLKS_PACCH_UL_LOAD
Long Name
SIG_BLKS_PACCH_UL_LOAD
Definition
UL PACCH signalling load on all the existing PCCCHs. The UL PACCH signalling
load counts the number of PACCH/UL blocks used on PCCCHs over the
granularity period. The following messages are taken into account: - Packet
Control Ack reported on UL path sent in answer to Packet DL Assignment sent on
PCCCH; - Packet Resource Request reported on UL path sent in answer to Packet
UL Assignment sent on PCCCH; - Packet Cell Change Failure sent in an UL RLC
control block on PCCCH; - Packet Measurement Report sent in an UL RLC control
block on PCCCH. The messages sent on PACCH/UL of an on-going TBF are not
counted (Packet DL Ack/Nack, Packet Resource Request, Packet Control Ack).
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL PACCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1315 / 1392
24 MFS-GPRS Counters
SIG_BLKS_NC2_UL_PACCH_PTM_LOAD
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL PACCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1316 / 1392
24 MFS-GPRS Counters
SIG_BLKS_NC2_UL_PACCH_CCCH_LOAD
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL PACCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1317 / 1392
24 MFS-GPRS Counters
SIG_BLKS_UL_PACCH_CCCH_PRR_LOAD
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
UL PACCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1318 / 1392
24 MFS-GPRS Counters
NB_UL_RLC_BLOCK_PACCH
Definition
Trigger Condition
Whenever the MFS receives an UL RLC Block (different from a dummy block) on
PACCH (RLC/MAC control message in normal burst format) whatever the mode
of the MS is (packet transfer or packet idle mode). On slave PDCHs, the counter
is incremented on receipt of one of the following messages: - a 04.60 PACKET
RESOURCE REQUEST message, - a 04.60 (EGPRS) PACKET DOWNLINK
ACK/NACK message, - a 04.60 PACKET CELL CHANGE FAILURE message, - a
04.60 PACKET MEASUREMENT REPORT message. - a 04.60 PACKET CELL
CHANGE NOTIFICATION message. - a 04.60 PACKET PSI STATUS message. a 04.60 PACKET SI STATUS message. - a 04 60 PACKET MOBILE TBF STATUS
message. On master PDCHs, the counter is incremented on receipt of one of
the following messages: - a 04.60 PACKET RESOURCE REQUEST message,
- a 04.60 PACKET CELL CHANGE FAILURE message, - a 04.60 PACKET
MEASUREMENT REPORT message.
Sub Domain 1
Radio interface
Sub Domain 2
UL PACCH
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1319 / 1392
24 MFS-GPRS Counters
1320 / 1392
24 MFS-GPRS Counters
24.4.4.15.2 N/A
24.4.4.15.2.1 P21a - NB_UL_RLC_BLOCK_PDTCH_RETRANS_CS1
Long Name
NB_UL_RLC_BLOCK_PDTCH_RETRANS_CS1
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1321 / 1392
24 MFS-GPRS Counters
NB_UL_RLC_BLOCK_PDTCH_RETRANS_CS2
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1322 / 1392
24 MFS-GPRS Counters
NB_UL_RLC_BLOCK_PDTCH_RETRANS_CS3
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1323 / 1392
24 MFS-GPRS Counters
NB_UL_RLC_BLOCK_PDTCH_RETRANS_CS4
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1324 / 1392
24 MFS-GPRS Counters
NB_UL_RLC_BLOCK_PDTCH_RETRANS_MCS1
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1325 / 1392
24 MFS-GPRS Counters
NB_UL_RLC_BLOCK_PDTCH_RETRANS_MCS2
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1326 / 1392
24 MFS-GPRS Counters
NB_UL_RLC_BLOCK_PDTCH_RETRANS_MCS3
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1327 / 1392
24 MFS-GPRS Counters
NB_UL_RLC_BLOCK_PDTCH_RETRANS_MCS4
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1328 / 1392
24 MFS-GPRS Counters
NB_UL_RLC_BLOCK_PDTCH_RETRANS_MCS5
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1329 / 1392
24 MFS-GPRS Counters
NB_UL_RLC_BLOCK_PDTCH_RETRANS_MCS6
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1330 / 1392
24 MFS-GPRS Counters
NB_UL_RLC_BLOCK_PDTCH_RETRANS_MCS7
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1331 / 1392
24 MFS-GPRS Counters
NB_UL_RLC_BLOCK_PDTCH_RETRANS_MCS8
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1332 / 1392
24 MFS-GPRS Counters
NB_UL_RLC_BLOCK_PDTCH_RETRANS_MCS9
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1333 / 1392
24 MFS-GPRS Counters
NB_UL_RADIO_BLOCK_PDTCH
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1334 / 1392
24 MFS-GPRS Counters
NB_DUMMY_UL_BLOCKS
Definition
Number of Packet Uplink Dummy Control blocks received on the radio interface.
Note: This counter applies to both GPRS and EGPRS TBFs.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1335 / 1392
24 MFS-GPRS Counters
NB_USEFUL_UL_RLC_BLOCK_PDTCH_CS1
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1336 / 1392
24 MFS-GPRS Counters
NB_USEFUL_UL_RLC_BLOCK_PDTCH_CS2
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1337 / 1392
24 MFS-GPRS Counters
NB_USEFUL_UL_RLC_BLOCK_PDTCH_CS3
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1338 / 1392
24 MFS-GPRS Counters
NB_USEFUL_UL_RLC_BLOCK_PDTCH_CS4
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1339 / 1392
24 MFS-GPRS Counters
NB_USEFUL_UL_RLC_BLOCK_PDTCH_MCS1
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1340 / 1392
24 MFS-GPRS Counters
NB_USEFUL_UL_RLC_BLOCK_PDTCH_MCS2
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1341 / 1392
24 MFS-GPRS Counters
NB_USEFUL_UL_RLC_BLOCK_PDTCH_MCS3
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1342 / 1392
24 MFS-GPRS Counters
NB_USEFUL_UL_RLC_BLOCK_PDTCH_MCS4
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1343 / 1392
24 MFS-GPRS Counters
NB_USEFUL_UL_RLC_BLOCK_PDTCH_MCS5
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1344 / 1392
24 MFS-GPRS Counters
NB_USEFUL_UL_RLC_BLOCK_PDTCH_MCS6
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1345 / 1392
24 MFS-GPRS Counters
NB_USEFUL_UL_RLC_BLOCK_PDTCH_MCS7
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1346 / 1392
24 MFS-GPRS Counters
NB_USEFUL_UL_RLC_BLOCK_PDTCH_MCS8
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1347 / 1392
24 MFS-GPRS Counters
NB_USEFUL_UL_RLC_BLOCK_PDTCH_MCS9
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1348 / 1392
24 MFS-GPRS Counters
NB_UL_RLC_BYTES_PDTCH_LOST_CS
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1349 / 1392
24 MFS-GPRS Counters
NB_UL_RLC_BYTES_PDTCH_LOST_MCS
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
Cell
External Comment
1350 / 1392
25 MFS-LCS Counters
25 MFS-LCS Counters
1351 / 1392
25 MFS-LCS Counters
1352 / 1392
25 MFS-LCS Counters
1353 / 1392
25 MFS-LCS Counters
25.2.2.2.2 N/A
25.2.2.2.2.1 P801 - NB_ASSIST_DATA_REQ
Long Name
NB_ASSIST_DATA_REQ
Definition
Number of received LCS requests for GPS assistance data (initially requested by
the MS) received from the BSC.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1354 / 1392
25 MFS-LCS Counters
NB_ASSIST_DATA_SUCC
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1355 / 1392
25 MFS-LCS Counters
25.2.2.3.2 N/A
25.2.2.3.2.1 P800 - NB_LOC_REQ
Long Name
NB_LOC_REQ
Definition
Number of received LCS requests for MS positioning received from the BSC.
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Location estimate
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1356 / 1392
25 MFS-LCS Counters
NB_LOC_TA_SUCC
Definition
Trigger Condition
Incremented each times the SMLC sends to the BSC a BSCLP PERFORM
LOCATION RESPONSE message with the OIE Location Estimate and the OIE
Positioning Data containing field Positioning Method set to "Timing Advance", and
the associated field "usage" set to "Results used to generate location".
Sub Domain 1
Radio interface
Sub Domain 2
Location estimate
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1357 / 1392
25 MFS-LCS Counters
NB_LOC_CONV_GPS_SUCC
Definition
Trigger Condition
Incremented each times the SMLC sends to the BSC a BSCLP PERFORM
LOCATION RESPONSE message with the OIE Location Estimate and the OIE
Positioning Data containing field Positioning Method set to "Conventional GPS",
and the associated field "usage" set to "Results used to generate location".
Sub Domain 1
Radio interface
Sub Domain 2
Location estimate
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1358 / 1392
25 MFS-LCS Counters
NB_LOC_MA_AGPS_SUCC
Definition
Trigger Condition
Incremented each times the SMLC sends to the BSC a BSCLP PERFORM
LOCATION RESPONSE message with the OIE Location Estimate and the OIE
Positioning Data containing field Positioning Method set to "Mobile assisted GPS",
and the associated field "usage" set to "Results used to generate location".
Sub Domain 1
Radio interface
Sub Domain 2
Location estimate
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1359 / 1392
25 MFS-LCS Counters
NB_LOC_MB_AGPS_SUCC
Definition
Number of successful location response sent to the BSC using MS Based A-GPS
positioning method.
Trigger Condition
Incremented each times the SMLC sends to the BSC a BSCLP PERFORM
LOCATION RESPONSE message with the OIE Location Estimate and the OIE
Positioning Data containing field Positioning Method set to "Mobile based GPS",
and the associated field "usage" set to "results used to generate location".
Sub Domain 1
Radio interface
Sub Domain 2
Location estimate
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1360 / 1392
25 MFS-LCS Counters
25.2.2.4.2 N/A
25.2.2.4.2.1 P814 - NB_LCS_PROTOCOL_ERROR
Long Name
NB_LCS_PROTOCOL_ERROR
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1361 / 1392
25 MFS-LCS Counters
NB_LCS_INTERRUPTED_INTRA_BSC_HO
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1362 / 1392
25 MFS-LCS Counters
NB_LCS_INTERRUPTED_INTER_BSC_HO
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1363 / 1392
25 MFS-LCS Counters
NB_LCS_FAILURE_RRLP
Definition
Trigger Condition
Incremented each times the SMLC receives a 04.31 RRLP (Protocol error)
from the MS, or each times any 04.31 RRLP message from the MS is not
complete/understandable.
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1364 / 1392
25 MFS-LCS Counters
NB_LCS_FAILURE_TIMER_EXPIRY
Definition
Trigger Condition
Incremented whenever one of the timer set to control the location process
expires in the SMLC (Timer currently defined are: T_LCS_LowDelay,
T_LCS_DelayTolerent, T_RRLP_LowDelay, T_RRLP_DelayTolerent)
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1365 / 1392
25 MFS-LCS Counters
NB_LCS_FAILURE_INTERNAL
Definition
Trigger Condition
Incremented each times PRCF or PCF returns an error which is not linked to timer
expiry or to BSCLP/RRLP protocol error. and/or Incremented whenever the SMLC
sends to the BSC a BSCLP PERFORM LOCATION RESPONSE with LCS cause
IE set to: - System Failure - Congestion
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1366 / 1392
25 MFS-LCS Counters
NB_UNKNOWN_LCS_REQ
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1367 / 1392
25 MFS-LCS Counters
25.2.2.5.2 N/A
25.2.2.5.2.1 P807 - NB_LOC_TA_PCF_REQ
Long Name
NB_LOC_TA_PCF_REQ
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Positioning method
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1368 / 1392
25 MFS-LCS Counters
NB_LOC_TA_PCF_SUCC
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Positioning method
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1369 / 1392
25 MFS-LCS Counters
NB_LOC_CONV_GPS_PCF_REQ
Definition
Trigger Condition
Incremented each times a location estimate is performed in the SMLC using PCF
"Conventional GPS".
Sub Domain 1
Radio interface
Sub Domain 2
Positioning method
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1370 / 1392
25 MFS-LCS Counters
NB_LOC_MA_AGPS_PCF_REQ
Definition
Trigger Condition
Incremented each times a location estimate is performed in the SMLC using PCF
"MS assisted GPS".
Sub Domain 1
Radio interface
Sub Domain 2
Positioning method
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1371 / 1392
25 MFS-LCS Counters
NB_LOC_MA_AGPS_PCF_SUCC
Definition
Trigger Condition
Incremented each times the PCF "MS-assisted A-GPS" returns a position estimate
without error indications.
Sub Domain 1
Radio interface
Sub Domain 2
Positioning method
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1372 / 1392
25 MFS-LCS Counters
NB_LOC_MB_AGPS_PCF_REQ
Definition
Trigger Condition
Incremented each times a location estimate is performed in the SMLC using PCF
"MS-based A-GPS".
Sub Domain 1
Radio interface
Sub Domain 2
Positioning method
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1373 / 1392
25 MFS-LCS Counters
NB_LOC_MB_AGPS_PCF_SUCC
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Positioning method
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1374 / 1392
25 MFS-LCS Counters
NB_LOC_CONV_GPS_PCF_SUCC
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Positioning method
Sub Domain 3
N/A
Measured Object
LcsCell
External Comment
1375 / 1392
25 MFS-LCS Counters
1376 / 1392
25 MFS-LCS Counters
AV_CONV_GPS_LAT
Definition
Averaged latitude of the mobile stations obtained with Conventional GPS PCF
Trigger Condition
The MFS maintains a sum of the latitudes obtained with Conventional GPS PCF
as well as the number of latitude measurements obtained with Conventional GPS
PCF. Whenever Conventional GPS PCF algorithm returns a positioning estimation
without error indications, - the sum is incremented by the latitude of the mobile
station. - the number of latitude measurements is incremented by one. At the
expiry of the reporting period, the MFS computes the average by dividing the
obtained sum by the obtained number of measurements.
Sub Domain 1
Radio interface
Sub Domain 2
Positioning statistics
Sub Domain 3
Conventional GPS
Measured Object
LcsCell
External Comment
1377 / 1392
25 MFS-LCS Counters
AV_CONV_GPS_LONG
Definition
Averaged longitude of the mobile stations obtained with Conventional GPS PCF
Trigger Condition
The MFS maintains a sum of the longitudes obtained with Conventional GPS PCF
as well as the number of longitude measurements obtained with Conventional
GPS PCF. Whenever Conventional GPS PCF algorithm returns a positioning
estimation without error indications, - the sum is incremented by the longitude of
the mobile station. - the number of longitude measurements is incremented by
one. At the expiry of the reporting period, the MFS computes the average by
dividing the obtained sum by the obtained number of measurements.
Sub Domain 1
Radio interface
Sub Domain 2
Positioning statistics
Sub Domain 3
Conventional GPS
Measured Object
LcsCell
External Comment
1378 / 1392
25 MFS-LCS Counters
ST_DEV_CONV_GPS_LAT
Definition
Standard deviation of the latitude of the mobile stations obtained with Conventional
GPS PCF
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Positioning statistics
Sub Domain 3
Conventional GPS
Measured Object
LcsCell
External Comment
1379 / 1392
25 MFS-LCS Counters
ST_DEV_CONV_GPS_LONG
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Positioning statistics
Sub Domain 3
Conventional GPS
Measured Object
LcsCell
External Comment
1380 / 1392
25 MFS-LCS Counters
AV_MA_AGPS_LAT
Definition
Averaged latitude of the mobile stations obtained with MS Assisted A-GPS PCF
Trigger Condition
The MFS maintains a sum of the latitudes obtained with MS Assisted A-GPS
PCF as well as the number of latitude measurements obtained with MS Assisted
A-GPS PCF. Whenever MS Assisted A-GPS PCF algorithm returns a positioning
estimation without error indications, - the sum is incremented by the latitude of the
mobile station. - the number of latitude measurements is incremented by one. At
the expiry of the reporting period, the MFS computes the average by dividing the
obtained sum by the obtained number of measurements.
Sub Domain 1
Radio interface
Sub Domain 2
Positioning statistics
Sub Domain 3
MS assisted A-GPS
Measured Object
LcsCell
External Comment
1381 / 1392
25 MFS-LCS Counters
AV_MA_AGPS_LONG
Definition
Averaged longitude of the mobile stations obtained with MS Assisted A-GPS PCF
Trigger Condition
The MFS maintains a sum of the longitudes obtained with MS Assisted A-GPS
PCF as well as the number of longitude measurements obtained with MS Assisted
A-GPS PCF. Whenever MS Assisted A-GPS PCF algorithm returns a positioning
estimation without error indications, - the sum is incremented by the longitude of
the mobile station. - the number of longitude measurements is incremented by
one. At the expiry of the reporting period, the MFS computes the average by
dividing the obtained sum by the obtained number of measurements.
Sub Domain 1
Radio interface
Sub Domain 2
Positioning statistics
Sub Domain 3
MS assisted A-GPS
Measured Object
LcsCell
External Comment
1382 / 1392
25 MFS-LCS Counters
ST_DEV_MA_AGPS_LAT
Definition
Standard deviation of the latitude of the mobile stations obtained with MS Assisted
A-GPS PCF
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Positioning statistics
Sub Domain 3
MS assisted A-GPS
Measured Object
LcsCell
External Comment
1383 / 1392
25 MFS-LCS Counters
ST_DEV_MA_AGPS_LONG
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Positioning statistics
Sub Domain 3
MS assisted A-GPS
Measured Object
LcsCell
External Comment
1384 / 1392
25 MFS-LCS Counters
AV_MB_AGPS_LAT
Definition
Averaged latitude of the mobile stations obtained with MS Based A-GPS PCF
Trigger Condition
The MFS maintains a sum of the latitudes obtained with MS Based A-GPS PCF
as well as the number of latitude measurements obtained with MS Based A-GPS
PCF. Whenever MS Based A-GPS PCF algorithm returns a positioning estimation
without error indications, - the sum is incremented by the latitude of the mobile
station. - the number of latitude measurements is incremented by one. At the
expiry of the reporting period, the MFS computes the average by dividing the
obtained sum by the obtained number of measurements.
Sub Domain 1
Radio interface
Sub Domain 2
Positioning statistics
Sub Domain 3
MS based A-GPS
Measured Object
LcsCell
External Comment
1385 / 1392
25 MFS-LCS Counters
AV_MB_AGPS_LONG
Definition
Averaged longitude of the mobile stations obtained with MS Based A-GPS PCF
Trigger Condition
The MFS maintains a sum of the longitudes obtained with MS Based A-GPS PCF
as well as the number of longitude measurements obtained with MS Based A-GPS
PCF. Whenever MS Based A-GPS PCF algorithm returns a positioning estimation
without error indications, - the sum is incremented by the longitude of the mobile
station. - the number of longitude measurements is incremented by one. At the
expiry of the reporting period, the MFS computes the average by dividing the
obtained sum by the obtained number of measurements.
Sub Domain 1
Radio interface
Sub Domain 2
Positioning statistics
Sub Domain 3
MS based A-GPS
Measured Object
LcsCell
External Comment
1386 / 1392
25 MFS-LCS Counters
ST_DEV_MB_AGPS_LAT
Definition
Standard deviation of the latitude of the mobile stations obtained with MS Based
A-GPS PCF
Trigger Condition
The MFS maintains: - a first sum S1 of squared latitudes obtained with MS Based
A-GPS PCF, - a second sum S2 of latitudes obtained with MS Based A-GPS
PCF, - the number N of latitude measurements obtained with MS Based A-GPS
PCF. Whenever MS Based A-GPS PCF algorithm returns a positioning estimation
without error indications, - the first sum S1 is incremented by the squared latitude
of the mobile station, - the second sum S2 is incremented by the latitude of the
mobile station, - the number N of latitude measurements is incremented by one.
At the expiry of the reporting period, the MFS computes the standard deviation as
follows: Standard_Deviation = Square_Root(Variance) where Variance = S1/N (S2/N)^2. At the expiry of the reporting period, the MFS computes the variance
by dividing the obtained sum by the obtained number of measurements. The
standard deviation is obtained by computing the square root of the variance.
Sub Domain 1
Radio interface
Sub Domain 2
Positioning statistics
Sub Domain 3
MS based A-GPS
Measured Object
LcsCell
External Comment
1387 / 1392
25 MFS-LCS Counters
ST_DEV_MB_AGPS_LONG
Definition
Standard deviation of the longitude of the mobile stations obtained with MS Based
A-GPS PCF
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Positioning statistics
Sub Domain 3
MS based A-GPS
Measured Object
LcsCell
External Comment
1388 / 1392
25 MFS-LCS Counters
25.3.2.2.5 TA positioning
25.3.2.2.5.1 P822 - AV_TA_LAT
Long Name
AV_TA_LAT
Definition
Trigger Condition
The MFS maintains a sum of the latitudes obtained with TA positioning PCF as
well as the number of latitude measurements obtained with TA positioning PCF.
Whenever "CI+TA" PCF algorithm returns a positioning estimation without error
indications, - the sum is incremented by the latitude of the mobile station. - the
number of latitude measurements is incremented by one. At the expiry of the
reporting period, the MFS computes the average by dividing the obtained sum by
the obtained number of measurements.
Sub Domain 1
Radio interface
Sub Domain 2
Positioning statistics
Sub Domain 3
TA positioning
Measured Object
LcsCell
External Comment
1389 / 1392
25 MFS-LCS Counters
AV_TA_LONG
Definition
Trigger Condition
The MFS maintains a sum of the longitudes obtained with TA positioning PCF as
well as the number of longitude measurements obtained with TA positioning PCF.
Whenever "CI+TA" PCF algorithm returns a positioning estimation without error
indications, - the sum is incremented by the longitude of the mobile station. - the
number of longitude measurements is incremented by one. At the expiry of the
reporting period, the MFS computes the average by dividing the obtained sum by
the obtained number of measurements.
Sub Domain 1
Radio interface
Sub Domain 2
Positioning statistics
Sub Domain 3
TA positioning
Measured Object
LcsCell
External Comment
1390 / 1392
25 MFS-LCS Counters
ST_DEV_TA_LAT
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Positioning statistics
Sub Domain 3
TA positioning
Measured Object
LcsCell
External Comment
1391 / 1392
25 MFS-LCS Counters
ST_DEV_TA_LONG
Definition
Trigger Condition
Sub Domain 1
Radio interface
Sub Domain 2
Positioning statistics
Sub Domain 3
TA positioning
Measured Object
LcsCell
External Comment
1392 / 1392