Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
! Temperature control
Auto-tuning temperature control with pretune.
! Parison control
Fast wall thickness control with simple profile programming.
! Hydraulic control
Accurate open-loop or closed- loop motion control.
! Sequence control
Standard ladder logic programming.
Hydraulic Control
The hydraulic motion control with smooth and precise control is one of the most important
features of the blow-moulding machines. While closed-loop control provides the ultimate
positioning accuracy, the open-loop control may also be used to realize less demanding and
cost sensitive positioning solutions.
! Motion control in open-loop or closed-loop for carriage, mould and blow-pin movements
! Up to 16 channels possible to drive servo/proportional valves (using four SPAC20 PA4
modules)
! Hydraulic motion control with high accuracy and repeatability
! Simple calibration of the complete hydraulic system (including valve, cylinder and linear
position sensor)
Parison Control
Wall thickness parison controller is available for continuous as well as for accumulator based
machines. The touch screen technology enables fast and efficient design of the parison wall
thickness profile.
! Wall thickness control using profiles with up to 128 points and smooth interpolation
between points
! Control loop update in 80s or 160s
Temperature Control
Multi-loop temperature control is capable of accurate temperature control of different types of
extruders and co-extruders. Intelligent pre-tune and auto-tune functions are built-in to enable
simple automatic tuning of the control loops and to adapt control parameters to varying load
conditions. User-friendly graphical screens and improved diagnostics make the control
system easy to use and simple to maintain the heating/cooling elements.
Sequence Control
The MELSEC series is an extremely compact and very powerful generation of logic
controllers from the Mitsubishi Electric. Besides the other convenient programming tools, the
sequential programming can be done also with the powerful GX Developer featuring full online programming capability.
! More than 60 different types of modules are available to interface with different kinds of
control devices.
! Up to 1024 I/O points are possible by using up to 7 extension racks.
! High-speed ladder processing with instruction cycle as low as 0.075s per logic
instruction (Q2ASHCPU)
! More than 700 instructions available
! Standard PC-based programming with powerful ladder logic programming tools
! Full on-line programming capability, which is especially useful during upgrading or
maintenance of machines
System Configuration
Three different powerful versions cover the overall range of applications of blow-molding
technology: Basic, Standard and Professional. Maximum flexibility permits a very attractive
price level.
performance
PROFESSIONAL
STANDARD
BASIC
systems
Specifications
BASIC
STANDARD
PROFESSIONAL
Temperature zones
16
16
64
16
BASIC
STANDARD
PROFESSIONAL
A2SHCPU-S1
Q2ASHCPU
Q2ASHCPU-S1
I/O points
512
512
1024
Instruction time s
0.25
0.075
0.075
Multiple programs
Co-processor
module SPAC20
BASIC
STANDARD
PROFESSIONAL
MAC E700
REDIS 52 B
REDIS 52 B
Display type
320x240 color
640x480 color
640x480 color
Display size
5.9
10.4
10.4
Function keys
16
26
26
Touch screen
Multi-language
1000
10000
10000
Parison and
Hydraulic channels
Continuous
extrusion machine
Accumulator based
machine
Hydraulic motion
control
Specifications
PLC CPU type
Specifications
HMI type
Power
Supply
Q2ASHCP
SPAC20PA4
SPAC20ATHC16
CPU
Module
Coprocessor
Module: Parisonand Hydraulic
Controller
Coprocessor
Module:
Temperature and
Analog I/O
(Profibus
Module)
Digital
Inputs
(16)
Digital
Inputs
(16)
Digital
Inputs
(16)
Digital
Outputs
(16)
Digital
Outputs
(16)
Digital
Outputs
(16)
Digital
Outputs
(16)
Digital
Outputs
(16)
REDIS 52 B
PECS the control systems for extrusion blow moulding are the actual result of the
partnership between Mitsubishi Electric, Inea and Resotec.
Mitsubishi Electric is a recognized company as a Global Player among the worldwide
leading companies of control technology, drives technology and robotics.
Inea's business is control and management of industrial processes. Inea is a specialized firm,
providing engineering solutions, services and equipment for control and management of
industrial systems, known for its excellence in technology, quality and customer services.
During the last ten years, Inea is present also in the field of automation control of the blowmolding machinery as a technology partner of Mitsubishi Electric and gives all necessary
technical support worldwide.
Resotec is recognized as a carrier of know-how in the field of automation for plastics
processing machinery and a leader in visualization technology.
INEA d.o.o.
Stegne 11
SI-1117 Ljubljana
Phone +386 1 51381-00
Fax
+386 1 51381-70
www.inea.si
pecs@inea.si
Local distributor:
RESOTEC
Eisenstrae 7
D-34225 Baunatal
Phone +49 561 94987-0
Fax
+49 561 498089
www.resotec.com
info@resotec.com