Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
NXinterviewQuestionsMechanicalEngg.Blog|CADCAMCAEBlog|CivilEngg.BlogPramitKumarSenapati
Mechanical Engg. Blog | CADCAMCAE Blog | Civil Engg. BlogPramit Kumar Senapati InterviewFAQs NX interview Questions
NXinterviewQuestions
Explain the following:
1.Product life cycle management PLM
2.Team centre
3.Master model concept
4.IMAN5.Grip
6.Interoperate
7.Examine geometry
8.Global Shaping
9.Part cleanup
10.Quick stack
11.Knowledge fusion
12.WAVE
13.Promotion of bodies
14.Cloning
15.Zone
16.Envelope
17.Component filter
18.Weight management
19.MACRO
20.Load Options File
21.Smart model
22.Part families
23.UDF
24.Sheet to solid assistant
25.Quality checks of model in NX
26.What is law curve?
27.What is rho?
28.What is the limit for undo?
29.How many colors are there in UG?
30.How is tube shown in model tree?
31.What is a pattern face?
32.Explain Heal geometry?
33.What is Para Solid?
34.What is direct modeling?
http://blog.smartlearningindia.com/jobopenings/nxinterviewquestions/
1/7
1/6/2015
NXinterviewQuestionsMechanicalEngg.Blog|CADCAMCAEBlog|CivilEngg.BlogPramitKumarSenapati
2/7
1/6/2015
NXinterviewQuestionsMechanicalEngg.Blog|CADCAMCAEBlog|CivilEngg.BlogPramitKumarSenapati
3/7
1/6/2015
NXinterviewQuestionsMechanicalEngg.Blog|CADCAMCAEBlog|CivilEngg.BlogPramitKumarSenapati
4/7
1/6/2015
NXinterviewQuestionsMechanicalEngg.Blog|CADCAMCAEBlog|CivilEngg.BlogPramitKumarSenapati
5/7
1/6/2015
NXinterviewQuestionsMechanicalEngg.Blog|CADCAMCAEBlog|CivilEngg.BlogPramitKumarSenapati
Multiple segments will give multiple faces for each spline in the string, and they will be analytic face.
The primitive approach views a solid model as a combination of simple, generic & standard shapes that
can be combined. Primitive shapes include cubes, sphere, cone, wedge etc..,.
The feature based modeling is similar to primitive based modeling it replaces primitives with features
such as Extrusion, Revolve etc.., and embeds Boolean operations in the feature definition.
The sketch based modeling is similar to feature based modeling except that allows the user to create
more elaborate & more general feature other than using predefined shapes.
Model Coordinate system (MCS): It is defines as the reference space of the model with respect to which all
the model and geometrical data is stored. It is a Cartesian system. The default sketch planes indicate the 3
planes of MCS and their intersection is the origin.
Work Coordinate System (WCS): The WCS is a convenient user defined system that facilities geometric
construction. It can be established at any position and at any orientation in space that the user desires.
The WCS requires 3 non collinear points to define its XY plane.
Screen Coordinate System (SCS): The SCS is defined as a 2D device dependent coordinate system.
NURBS is an acronym for Non Uniform Rational B Spline
Iso parameters blends are used in creating a blend between the turbine blades and the hub. It gives the
flexibility of creating the blend which may follow a define string which may either be Linear, Cubic, Law
curve, Constant, Equation etc..,. The other blend type includes Disc blend, conic, sphere and Iso
parametric.
Insert > Feature Operations > Edge Blend > Toggle on Allow Variable and Setback > select the edge >
select the point and the corresponding blend values.
Through Points : It can be employed when creating a sheet using row of points
Through Poles : sheet is generated by selecting the first and the last points in n rows
Through Cloud Points : It passes through specified array of points
Note: The above three methods are Unparametric
Ruled : It creates sheet between two section strings only
Through Curve : It is similar to Ruled. It creates sheet between N section strings. Through Curve Mesh :It
creates sheet using Primary Strings and Cross Stings
Primary Strings should be approximately one directly i.e., roughly parallel. It can be in the range
of 2 150 strings
Cross Strings should be approximately perpendicular to the primary strings. They can be in the
range of 2150 strings
There may be no constraint or the constraint may either be tangent or continuous curvature
Swept : A swept feature is a body swept out by section strings moving along guide string. Swept feature
can either be solid or sheet bodies.
http://blog.smartlearningindia.com/jobopenings/nxinterviewquestions/
6/7
1/6/2015
NXinterviewQuestionsMechanicalEngg.Blog|CADCAMCAEBlog|CivilEngg.BlogPramitKumarSenapati
Guide Strings are in the range of 1 3. The guide string may be made up of many segments
Section strings are in the range of 2 150
Quilt : A quilt feature is a single, four sided, bi cubic degree 3 x 3 approximate surface, untrimmed, B
Surface sheet
Swept > 3 Guide strings and Max of 150 sections string. It easily follows the guide strings i.e., it doesnt
undergo any twist as it moves along the guide string
Sweep along guide >1Guide String & 1 section string. It undergoes twist Ex. Section moving along a
helix
In NX Law Curve is a Feature, which has a level of control over its properties, represented in a Law Curve
Frame or graph. The X and Y values of the graph are both Properties of the Law Curve. When we draw a
graph we draw an X direction and a Y direction. The X direction is the Independent and the Y direction is
the DependantX can go where it likes but Y is dependent on where X is, as its always perpendicular to it.
http://blog.smartlearningindia.com/jobopenings/nxinterviewquestions/
7/7