Sei sulla pagina 1di 193

Help Desk Software

samanage.com/HelpDesk

Prioritize & Manage Your Work Load. Learn How with a Free Trial Now!

Basic Error Codes


Hardware manuals can be found at:

POST ERROR CODES


Error
Description
Actions/Possible FRU's
-----------------------------------------------------------------------------

FIRMWARE ERROR CODES


00010000
0001000A
0001500x
00016000
00016010
00017001
00017002
00017003
00017006
00017007
00017008
00017013
00017015
00018000
00020000
000210y0
00031100
00031300
00070000
00070001
00070006
00070007
00070008
00070009
00070010
00070011
00070012
00070013
00070014
00070015
00070016
00070017
00070018
00070019

CPU card test error


Machine Check
Error while erasing system firmware
Use with Fxx Codes
System VPD access failure
CMOS error
CMOS data gone/not initialized
Power interruption during boot
Tamper evident detected or battery
Maximum login tries
Maximum login tries
No power on password entered
Tamper evident is detected-security
Bad flash image
Memory test error
Bad memory in slot "y" (1-8)
Keyboard in the wrong port
Failed to register keyboard interrupt
Service Processor POST failure
CPU card or power supply failure
Slow or stuck fan
System over temperature
Environmental condition
Environmental condition
Environmental condition
Environmental condition
Service processors fails self test
Bad NVRAM CRC error
Bad service processor firmware
Bad service processor VPD
Bad processor firmware failure
Bad or low battery
EPOW test failure
Interrupt (IRQ13) test failure

open in browser PRO version

CPU card
Use minimum config MAP
CPU card
Sys. Bd., VPD module
Battery
Battery
Update boot sequence
Power on Reset
Power on Reset
or Bad CMOS Battery
CPU card
Bad/unsupported memory
Keyboard, System Board
Service Proc., Sys. Bd.

Close Ad

Fans, SP, System Board


Use with Fxx codes
Use with Fxx codes
Use with Fxx codes
Use with Fxx codes
Serv. Proc., Sys. Bd.
Battery, System Board
Re-program firmware
Serv. Proc., Sys. Bd.
Firmware update, Serv. Proc.
Battery, SP, Sys. Bd.
Serv. Proc., Sys. Bd.
Sys. Bd., Serv. Proc

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

----------------------------------------------------------------------------0037cyyi
SCSI controller interface error
0208cyyi
SCSI device/adapter error
0210cyyi
SCSI DASD error
0211cyyi
SCSI tape error
0215cyyi
SCSI CDDROM error
c=SCSI controller ID assigned in the following order:
1. PCI slot 1
2. PCI slot 2
3. Integrated controller
4. PCI slot 3
5. Continues until last slot...
Example:

SCSI card slot 2


Integrated SCSI
SCSI card slot 3

= ID 0
= ID 1
= ID 2

Example:

Integrated SCSI
SCSI card slot 3

= ID 0
= ID 1

yy=POST error status codes


08
11
13
28
29
43
47
49
51
55
56
57
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78

Invalid device number


No SCSI card
Command failed
Reservation conflict
Device not available
Not enough memory
Waiting for completion
Sense needed
Reset needed
Not ready or no media
Invalid (unsupported) command
Write protected
Media error
Hardware error
Unit attention
Blank check
Command abort
Busy
Media
Script error
Invalid address
Media changed
Device reset
Format in progress
Format corrupted
Start required
Device ID conflict
Manual intervention
Media not found
In progress
Media eject failed
Write protect failed

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

78
80
81
82
83
84
85
86
87
88
89
90
99

Write protect failed


SCSI controller interface error
SCSI controller interface error
SCSI bus access error
SCSI fuse bad or PTC tripped
SCSI device command failed
SCSI controller interface error
SCSI controller interface error
Short record length
SCSI bus parity error
SCSI device no reset
Time out error
SCSI controller interface error

i=SCSI ID (0-9 or A-F)

01291000
An error during L2 Cache test
CPU card
0243025y
Graphics controller, DAC failure
Grpahics PCI card slot y
----------------------------------------------------------------------------20100xxx
20A80xxx
20A80000
20A80001
20A80002
20A80003
20A80004
20A80005
20D00xxx
20D0000F
20D00010
20E00000
20E00001
20E00002
20E00003
20E00004
20E00005
20E00008
20E00009
20E0000A
20E0000B
20E0000C
20E00017
20EE0xxx
20EE0003
20EE0004
20EE0005
20EE0006
20EE0007
20EE0008

Power Supply
Remote IPL error
Insufficient Information to boot
Verify IP address
Client IP address already used
Change IP address
Cannot get gateway IP address
Refer to Fxx Boot Problems
Cannot get server hardware address
Refer to Fxx Boot Problems
Bootp failed
See Checkpoint F75
File transmission (tftp) failed
Check network connection
Unknown/Unrecognized device
Device selftest failure, no SRN
Locate device with SMS
Device selftest failure
Power on password entry error
Wrong password entered
Privileged-access password entry err. Wrong password entered
Privileged-access password jumper is in wrong jumper position
Power on password must be set for Unattended Mode
Battery needs drained or replaced
Battery, System Board
EEPROM locked-Power on reset--or->
Bad System Board
CMOS corrupted or tampering evident
Battery, System Board
Invalid password entered 3 times
Power on reset, System Bd.
EEPROM lock problem
PAP jumper, System Board
EEPROM write problem
System Board
EEPROM read problem
System Board
Cold boot needed for password entry
Power on reset
Informational
IP parameter requires 3 delimiters
000.000.000.000
Invalid IP parameter
Invalid IP parameter (>255)
255.000.000.000
No SCSI controllers
Adapter, System Board
Keybaord not found
Keyboard, System Board
No adapters found
Adapter, Riser, System Bd.

21A00xxx
21A00001

SCSI disk drive


Test Unit Ready Failed (hardware)

open in browser PRO version

Device, cable, controller


Device, cable, controller

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

21A00002
21A00003
21A00004
21E00xxx
21ED0xxx
21EE0xxx
21F00xxx
21F20xxx

Test Unit Ready Failed-sense data


Send diagnostic failed
Send diagnostic failed-DevOfl cmd
SCSI tape
SCSI changer
Other SCSI device
SCSI CDROM
SCSI Read/Write Optical

25010xxx
25010000
25010001
25010002
25010003
25010004
25010006
25010007
25010008
25010009
2501000A
25A0xxy0
25A80xxx
25A80000
25A80001
25A80002
25A80011
25A80012
25A80100
25AA0xxx
25AA0000
25AA0001
25AA0002
25AA0003
25AA0004
25AA0005
25AA0006
25AA0007

Flash
No diskette in drive
Diskette seek error
Diskette doesn't contain *.IMG file
Can't open OPENPROM package
Can't find OPENPROM node
System id's don't match
Image has bad CRC
Flash write protected-Power on reset
Flash module not supported/recognized
Flash write protected-Power on reset
L2 Cache - refer to 2B2xxyrr
NVRAM
Initialization failed
All NVRAM initialized
GE area preserved
Data corruption detected-NVRAM
Data corruption detected
NVRAM data validation check failed
EEPROM
Unable to unlock EEPROM
Read-Recv error
Read-Trans error
Write-enable error
Write-recv error
Write-disable error
Write-Trans error
Unable to lock EEPROM

Media, device
Device
Device

Looking for firmware image


Insert firmware update dskt
System Board
System Board
Use correct firmware dskt
Replace firmware dskt
System Board
Use correct firmware dskt
System Board
CPU, System Board
Low Battery, Rebuild Config

Power On Reset
Security jumper, System Bd.

----------------------------------------------------------------------------25Cyyxxx
Memory
Memory PD
25Cyy001
DIMMS fails memory test
Memory DIMM
25Cyy002
DIMM not supported
yy=Memory DIMM PD bits
----------------------------------------------------------------------------PD Value
Size
Speed(nsecs)
Parity/ECC
Single/Dual
----------------------------------------------------------------------------64
8MB
60
ECC
Single
69
16MB
60
ECC
Single
6B
32MB
60
ECC
Single
6D
64MB
60
ECC
Single
6F
128MB
60
ECC
Single
-----------------------------------------------------------------------------28030xxx

RTC (Real Time Clock)

open in browser PRO version

Reset passwords/date/time
Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

28030xxx
28030001
28030002

RTC (Real Time Clock)


RTC not updating
Bad date/time

Reset passwords/date/time
RTC needs initialized
Reset date/time

29000002
Keyboard/mouse controller failed
System Board
29A00003
Keyboard missing
Keyboard, System Board
29B00004
Mouse missing
Mouse, System Board
----------------------------------------------------------------------------2B200042
Unknown processor type
2B2xxyrr
xx=processor type/speed
21
166Mhz 604+
22
200Mhz 604+
y=Cache information
0
Integrated cache or N/A
5
512KB
6
1MB
7
256KB
D
ICBM 1MB
2B2xxy22
Bad processor/CPU
2B2xxy31
Disabled due to Asymetrical MP
----------------------------------------------------------------------------2BA00xxx
Service Processor (SP)
2BA00000
Service Processor POST failure
2BA00001
CPU Card or power supply failure
2BA00006
FAN error incorrectly reported
Fans, Service Proc., Sys Bd.
2BA00007
SP reports over temperature
Fans, System Board
2BA00008
SP reports over temperature
Fans, System Board
2BA00009
CPU over temperature
Fans, CPU, System Board
2BA00010
Fast shutdown pending
Power supply, System Board
2BA00011
SP reports CPU failure
Power supply, System Board
2BA00012
SP reports self-test failure
Service Proc., System Board
2BA00013
SP reports bad NVRAM CRC
Battery, System Board
2BA00014
SP reports bad processor firmware
Rebuild firmware
2BA00015
SP reports bad SP VPD
Service Proc., System Board
2BA00016
SP reports firmware failure
Update firmware, Serv. Proc.
2BA00017
SP reports bad/low battery
Battery, SP, System Board
2BA00018
EPOW test failure
Serv. Proc., System Board
2BA00019
IRQ13 test failure
System Board, Serv. Proc.
2BA00020
SP reports VPD access failure
System Board, VPD module
2BA00022
SP reports bad CRC - CMOS/NVRAM
System Board
2BA00023
CPU card test error
CPU card
2BA00100
SP firmware recovery info can't be written to diskette
2BA00101
Service Processor not installed
2BA00102
No SP diskette in drive
2BA00103
SP firmware diskette corrupted
2BA00104
SP firmware diskette same level
2BA00200
SP firmware update error
Unplug/Replug-try again
2BA00201
SP firmware update error
2BA00202
SP firmware update error
2BA00203
SP firmware update error
2BA00204
SP firmware update error
----------------------------------------------------------------------------40100005
Loss of system power detected
Power Supply
40111002
Unknown power problem
Power Supply, Sys Bd, SP
40111022
High 5.0 voltage
Power Supply, CPU card
40111032
High 3.3 voltage
CPU card, Power Supply
40111042
High 2.5 voltage
CPU card, Power Supply

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

40111052
40111062
40111082
40111092
401110A2
401110B2
401110C2

High +12 voltage


High -12 voltage
Low 5.0 voltage
Low 3.3 voltage
Low 2.5 voltage
Low +12 voltage
Low -12 voltage

Power Supply, Sys. Bd.


Power Supply, Sys. Bd.
Power Supply, CPU card
CPU card, Power Supply
CPU card, Power Supply
Power Supply, Sys. Bd.
Power Supply, Sys. Bd.

40200001
40200021
40200023
40200031
40200033
40200041
40200043
40210011
40210014

Unknown cooling problem


CPU temperature warning
Critical CPU temperature warning
I/O planar temperature warning
Critical I/O planar temperature
Memory temperature warning
Critical memory temperature
Slow fan
Stopped fan

Fans

40A00000
IPL ROS surveillance interval exceeded-Firmware IPL failure
40B00000
Operating system surveillance interval exceeded
40D00003
Unknown slow shutdown commanded
Critical cooling problem
40D00004
Unknown fast shutdown commanded
Locked fan failure
----------------------------------------------------------------------------80001200
Bad firmware recovery diskette
Diskette
80001300
Same firmware level already loaded
80001400
Firmware doesn't support system
80001500
Firmware update file corrupted
80001600
Firmware update file not on drive
Verify drive/path/filename
80001700
Firmware file on disk corrupted
Obtain a new file
80001800
Valid firmware file not located
Verify drive/path/filename
80001900
Firmware doesn't support system
80002000
2 Flash images found
80002100
Firmware update couldn't be loaded
Verify drive/path/filename
80002200
Firmware update module write-protect POR, Retry, CPU card
80002300
Utility version not supported
POR, Retry, CPU card
80002400
Firmware module not supported
Flash on CPU card bad
80002500
Firmware module not supported
Flash on CPU card bad
80002600
Firmware module write-protected
POR, Retry, CPU card
80002700
Backup recover diskette needed
Insert diskette
80002800
Update firmware diskette not in drive Insert diskette
80072000
Service Processor not installed
Install Serv. Processor
----------------------------------------------------------------------------91001100
Remote IPL error, insufficient memory Defective/insufficient mem.
91001200
Remote IPL error - incorrect IP format for client IP address
91001300
Remote IPL error - incorrect IP format for server IP address
91001400
Remote IPL error - incorrect IP format for gateway IP address
91001500
Remote IPL error - incorrect IP format for netmask
91001600
Remote IPL error - error writing to NVRAM
91001700
Remote IPL error - ethernet adapter not found
91001900
Remote IPL error - token-ring adapter not found
91002000
Remote IPL error - no network adapters recognized
91002200
Remote IPL error - ping failed
M0CON000
M0CPU000

System hung during POST


CPU POST failed

open in browser PRO version

Go to minimum config
CPU Card, System Board

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

M0CPU000
M0CPU001
M0FD0000
M0GA0000
M0HD0000
M0KBD000
M0KBD001
M0KBD002
M0KBD003
M0MC0001
M0MEM000
M0MEM001
M0MEM002
M0PS0000
M0SCSI00
M0SCSI01
M0SPK000
M0SPK001
M0BT0000
M0NET000

CPU POST failed


CPU Card, System Board
Checkstop occurred
CPU Card, System Board
System hung during diskette POST
System Board, Diskette Drv.
Graphics Adapter POST failed
Graphics Adapter
System hung during POST
Go to minimum config
System hung during keyboard POST
System board, Keyboard
System didn't respond to key entry
Type 101 Keyboard
System didn't respond to key entry
Type 102 Keyboard
System didn't respond to key entry
Type 106 Keyboard
Machine Check
Go to minimum config
No good memory found
Memory, System Board
No good memory found
Memory, System Board
System hung during memory POST
Go to minimum config
Power failure
Go to Power MAP
Unable to load diagnostics
Go to minimum config
Unable to load diagnostics
Go to minimum config
Continuous beep is heard
System Board
The system doesn't beep
Speaker, System Board
Audio error--Use Fxx Code, if none-- Go to minimum config
Network error--Use Fxx Code, if none--Go to minimum config

Firmware Checkpoint Codes


F00 Manufacturing - Reserved for Parallel port download protocol
F01 Clear the EPOW register 1. Memory modules 2. system board
F02 Determine system bus speed, set ISA advisor
F04 Set memory refresh
F05 Transfer control to Operating System ( nornmal boot )
Action: Try to boot and run standalone diagnostics against the system. particularly
against the intended boot device. If the diagnostics are successful, it may
be necessary to perform an operating system specific recovery process,
or reinstall the operating system.
F06 Jump to set environment or check flash
F08 Run recovery block base memory, test 2k, then set stack
F09 Copy CRC verification code to RAM
F0A Turn on cache
F0B Flush cache
F0C Jump to CRC verification code in RAM
F0D Compute composite image CRc
F0E Jump back to ROM
F0F Turn off cache
F10 Check if composite image CRC is valid
open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

F11 Good CRC - jump to composite image


F12 Bad CRC - initialize base memory, stack
F13 Bad CRC - copy uncompressed recovery block code to RAM
F14 Bad CRC - jump to code in RAM
F15 Bad CRC - turn on cache
F16 Bad CRC - copy recovery block data section to RAM
F17 Bad CRC - invalidate and flush cache, set TOC
F18 Bad CRC - branch to high level recovery control routine
F19 Initialize base memory, stack
F1A Copy uncompressed recovery block code to RAM
F1B Jump to code in RAM
F1C Turn on cache
F1D Copy recovery block data section to RAM
F1E Invalidate and flush cache, set TOC
F1F Branch to high level control routine
F20 Initialize system I/O
F21 Run a console diagnostic routine
F22 No memory found
F23 No DIMM found in socket
F24 Remove bad DIMM found from DIMM information
F25 Unsupported DIMM detected
F26 Check valid image - start
F27 Check valid image - successful
F28 Wait for interrupt
F29 Transfers information to the business audio chip
F2B Wait until sound chip has been initialized
F2C Initialize the current input/pointer device
F2D Initialize the current output
F2E Register a console driver
F30 Set up early memory allocation heap, intialize Super I/O
F31 Determine system bus speed, set ISA driver
F32 Resync to SP (Console image)
F33 Set memory refresh
F35 Jump to set environment
open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

F40 Initialize interrupt subsystem and 8259s


F41 SP command setup
F42 SP mailbox interface
F43 get_vpd entry
F44 init_sp entry
F45 sp_recovery -> resync SP & CPU
----------------------------------------------------------------------------00016000 Error and the following Checkpoint Code
F46 IRQ13 stuck high Bad System Board or Service Processor
F47 Entry to error checking routine-No system board VPD, bad CRC Bad System Board
F48 Power supply or system board problem Other 8-digit Codes possible: 00070010, 40100005
F49 Voltage problem, system board, power supply or CPU 5V high/low-bad power supply,
CPU card, Other 8-digit Codes possible: 40111022, 40111082
F4A Voltage problem, system board or power supply 12V high/low - bad power supply,
CPU card, System Board Other 8-digit Codes possible: 40111052, 401110B2,
401110C2, 40111062, 00070010
F4B CPU over temperature or bad system board Other 8-digit
Codes possible: 40200021, 00070009
F4C start bit-map display function
F4D Bit-map file read into memory, start processing
F4E End bit-map display function
F4F IO/MEM over termperature or bad system board 8-digit Codes
possible: 40200031, 40200041,00070008
F50 Initialize CMOS RTC periodic interrupt
F51 System board or system over temperature, CPU card Critical
Temp Other 8-digit Codes possible: 40200023, 40200033, 40200043, 00070008, 00070009
F52 Bad system board (fan fail reported) Other 8-digit Codes possible: 40210011, 40210014
F53 Bad system board or Fans Other 8-digit Codes possible: 40210011, 40210014
F54 Fan fail warning
F55 Bad system board (unsupported EPOW)
F56 Voltage problem, system board, power supply or CPU 3.3V/2.5V high/low
Other 8-digit Codes possible: 40111032, 40111092, 40111042, 401110A2
----------------------------------------------------------------------------open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

F57 Bad or low battery


F58 IRQ13 test failure
F59 EPOW test failure
F5A Spurious IRQ6 interrupt (i.e. interrupt glitch)
F5B Fan failure warning
F5B Transfer control to Operating System ( service mode bootlist )
F5C Clear EPOW register failure
F5D Clear EPOW register failure
F60 Initialize keyboard/mouse controller, and password
F61 Extended memory initialization command
F62 Diskette initialization command
F64 Test of day routine
F6A SCSI initialization command
F70 Initialize debugger
F71 Start checking whether CMOS contents are valid
F72 End checking whether CMOS contents are valid
F73 Dumps contents of CMOS data area to a file
F74 Establishing Host conmnection
F75 BootP request
F77 Resync to SP (Recvoery image)
F79 Dupms contents of NVRAM data area to a file
F7A NVRAM initialization
F7B Check NVRAM validity CRC
F7C Loads contents of CMOS from file
F80 Initialize system call table
F82 Register a manager for use by the system
F88 Halt. System locked by error condition - power off
F90 Initialize VDISK file system
F91 Low-level initialize VDISK file systems
F94 Start SCSI initialization
F96 SCSI bus scan start
F97 SCSI polling interrupt
F98 SCSI device detected
F9E Real Time clock RTC initialization
open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

F9F Exit SCSI initialization


FA0 Start resident monitor, run V:autoexec.6md-initializes various sub- systems-video,
keyboard/mouse, extended memory, diskette, SCSI, etc.
FA1 Enter resident monitor
FA2 Resident monitor process
FA3 Resident monitor process
FA4 Exit resident monitor
FA5 ASCII terminal initialization
FA6 ASCII terminal initialization exit
FA9 p9 driver initialization
FAA p9 driver exit
FAB Keyboard driver initialization
FAC Keyboard driver exit
FAD Mouse driver initialization
FAE Mouse driver exit
FB0 Initialize rest of file system
FB1 Diskette initialization
FB2 Diskette drive type determination
FB3 Diskette initialization complete
FC0 Check if flash ROM OK
FCA Build boot table - Networks
FCB Build boot table - DASD
FCC Build boot table - CDROM
FCD Build boot table - diskettes
FCE No operating system boot, exit normal boot sequence
FD0 Start of boot sequence
FD2 No operating system boot - ensure CMOS RTC periodic clock updates displayed
FD4 Initialize console for loading diagnostics
FD8 Exit from diagnostic - run resident monitor
FDA IRQ15
FDB Unexpected processor exception
FDC Dynamic console selection
FDD Early processor exception
FDE Alternating pattern of FDE and FDA indicates a processor exception has been detected.
open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

FE1 Test timeout


FE2 Initialize system I/O
FE4 Initialize super I/O with default values
FE6 Set up early memory allocation heap
FE8 Initialize primary diskette drive in polled mode
FEA Try to load in recovery image from diskette
FEB F30 Verify recovery image is
The F40 action plan should also work valid | on the F30 Use the F30 firmware.
F40 Firmware flash corrupted, | A C T I O N load from diskette |
If the system will not boot up fully|and the checkpoint display reads "FEB",
|the firmware is partially corrupted, but |should be recoverable.
Make a copy of |the firmware update diskette, rename the |.img file to
PRECOVER.IMG and insert|this "recovery" diskette in the drive |
when the FEB appears on the checkpoint display.
FEC Get recovery image entry point
FED Invalidate instruction cache
FEE Jump to composite image
FF0 Manufacturing - Check fo parallel port hook
FF4 Manufacturing - Start flag not received
FF5 Manufacturing - Invalid start flag received
FF6 Manufacturing - Receive character timeout
FF7 Manufacturing - CRC value mismatch
FFA Error during flash update
FFC Operating system boot - no errors reported by IPL ROS
FFD Operating system boot - non-critical errors reported by IPL ROS
FFE No boot - critical error(s) reported by IPL ROS -or- F1 key pressed

Diagnostic Information for Multiple Bus Systems


Configuration Program Indicators
500
501
502
503

Querying
Querying
Querying
Querying

Standard I/O slot.


card in Slot 1.
card in Slot 2.
card in Slot 3.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

503
504
505
506
507
508
510
511
512
513
516
517
518
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
551
552
553

Querying card in Slot 3.


Querying card in Slot 4.
Querying card in Slot 5.
Querying card in Slot 6.
Querying card in Slot 7.
Querying card in Slot 8.
Starting device configuration.
Device configuration completed.
Restoring device configuration files from media.
Restoring basic operating system installation files from media.
Contacting server during network boot.
Mounting client remote file system during network IPL.
Remote mount of the root and /usr file systems failed during network boot.
Bus configuration running.
/etc/init invoked cfgmgr with invalid options; /etc/init has been
corrupted or incorrectly modified(irrecoverable error).
The configuration manager has been invoked with conflicting options
(irrecoverable error).
The configuration manager unable to access the ODM database (irrecoverable error).
The configuration managers unable to access the config.rules in the
ODM database (irrecoverable error).
The configuration manager unable to get data from customized device
in the ODM database (irrecoverable)
The configuration manager unable to get data from customized device
driver in the ODM( irrecoverable error).
The configuration manager was invoked with phase 1 flag (irrecoverable error).
The configuration manager cannot find sequence rule, or no program name
specified in ODM(irrecoverable)
The configuration manager is unable to update ODM data (irrecoverable error).
The program savebase returned an error.
The configuration manager is unable to access the PdAt object class (irrecoverable error).
There is not enough memory to continue (malloc failure); irrecoverable error.
The configuration manager could not find a configure method for a device.
The configuration manager is unable to acquire database lock (irrecoverable error).
HIPPI diagnostics interface driver being configured.
The configuration manager encountered more than one sequence rule (irrecoverable error).
The configuration manager encountered an error when invoking
the program in the sequence rule.
The configuration manager is going to invoke a configuration method.
The configuration method has terminated, and control has returned
to the configuration manager.
IPL vary-on is running.
IPL vary-on failed.
IPL phase 1 is complete.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

553 IPL phase 1 is complete.


554 The boot device could not be opened or read, or unable to define NFS swap
device during network boot.
555 An ODM error when trying to vary-on rootvg, or unable to create an NFS swap device
556 Logical Volume Manager encountered error during IPL vary-on.
557 The root filesystem does not mount.
558 There is not enough memory to continue the system IPL.
559 Less than 2 M bytes of good memory are available to load the AIX kernel.
570 Virtual SCSI devices being configured.
571 HIPPI common function device driver being configured.
572 HIPPI IPI-3 master transport driver being configured.
573 HIPPI IPI-3 slave transport driver being configured.
574 HIPPI IPI-3 transport services user interface device driver being configured.
575 A 9570 disk-array driver is being configured.
576 Generic async device driver being configured.
577 Generic SCSI device driver being configured.
578 Generic commo device driver being configured.
579 Device driver being configured for a generic device.
580 HIPPI TCPIP network interface driver being configured.
581 Configuring TCP/IP.
582 Configuring Token-Ring data link control.
583 Configuring an Ethernet data link control.
584 Configuring an IEEE Ethernet data link control.
585 Configuring an SDLC MPQP data link control.
586 Configuring a QLLC X.25 data link control.
587 Configuring a NETBIOS.
588 Configuring a Bisync Read-Write (BSCRW).
589 SCSI target mode device being configured.
590 Diskless remote paging device being configured.
591 Configuring an LVM device driver.
592 Configuring an HFT device driver.
593 Configuring SNA device drivers.
594 Asynchronous I/O being defined or configured.
595 X.31 pseudo-device being configured.
596 SNA DLC/LAPE pseudo-device being configured.
597 OCS software being configured.
598 OCS hosts being configured during system reboot.
599 Configuring FDDI data link control.
5c0 Streams-based hardware drive being configured.
5c1 Streams-based X.25 protocol being configured.
5c2 Streams-based X.25 COMIO emulator driver being configured.
5c3 Streams-based X.25 TCP/IP interface driver being configured.
5c4 FCS adapter device driver being configured.
5c5 SCB network device driver for FCS is being configured.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

5c5
5c6
600
602
603
604
605
606
607
608

SCB network device driver for FCS is being configured.


AIX SNA channel being configured.
Starting network boot portion of /sbin/rc.boot
Configuring network parent devices.
/usr/lib/methods/defsys, /usr/lib/methods/cfgsys, or /usr/lib/methods/cfgbus failed.
Configuring physical network boot device.
Configuration of physical network boot device failed.
Running /usr/sbin/ifconfig on logical network boot device.
/usr/sbin/ifconfig failed.
Attempting retrieve client.info file with tftp. Note that a
flashing 608 indicates multiple attempt(s)
609 The client.info file does not exist or it is zero length.
610 Attempting remote mount of NFS file system.
611 Remote mount of the NFS file system failed.
612 Accessing remote files; unconfiguring network boot device.
614 Configuring local paging devices.
615 Configuration of a local paging device failed.
616 Converting from diskless to dataless configuration.
617 Diskless to dataless configuration failed.
618 Configuring remote (NFS) paging devices.
619 Configuration of a remote (NFS) paging device failed.
620 Updating special device files and ODM in permanent
filesystem with data from boot RAM filesystem.
622 Boot process configuring for operating system installation.
650 IBM SCSD disk drive being configured
658 PCI Fibre Channel Disk Subsystem Controller being identified or configured.
659 2102 Fibre Channel Disk Subsystem Controller Drawer being identified or configured.
660 2102 Fibre Channel Disk Array being identified or configured.
662 Ultra2 Intergrated SCSI controller.
663 IBM ARTIC960 RxD PCI Adapter is being configured
664 32x (MAX) SCSI-2 CD-ROM drive being configured
669 PCI Gigabit Ethernet Adapter
674 ESCON Channel PCI Adapter
677 PCI Fiber Channel Arbitrated Loop Adapter
682 20x (MAX) SCSI-2 CD-ROM Drive being configured
638 4.5GB Ultra SCSI Single Ended Disk Drive being configured
689 4.5GB Ultra SCSI Single Ended Disk Drive being configured
690 9.1GB Ultra SCSI Single Ended Disk Drive being configured
700A 1.1 GB 8-bit SCSI disk drive being identified or configured.
701A 1.1 GB 16-bit SCSI disk drive is being identified or configured.
702A 1.1 GB 16-bit differential SCSI disk drive is being identified or configured.
703A 2.2 GB 8-bit SCSI disk drive is being identified or configured.
704A 2.2 GB 16-bit SCSI disk drive is being identified or configured.
705 Configuration method for the 2.2 GB 16-bit differential SCSI

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

705

Configuration method for the 2.2 GB 16-bit differential SCSI


disk drive being run. If irrecoverable, halt.
706A 4.5 GB 16-bit SCSI disk drive is being identified or configured.
707A 4.5 GB 16-bit differential SCSI disk drive is being identified or configured.
708A L2 cache is being identified or configured.
710 POWER GXT150M graphics adapter being identified or configured.
711 Unknown adapter being identified or configured.
712 Graphics slot bus configuration is executing.
713 The IBM ARTIC960 device is being configured.
714 A video capture adapter is being configured.
715 The Ultramedia Services audio adapter is being configured.
This LED displays briefly on the panel.
717 TP Ethernet Adapter being configured.
718 GXT500 Graphics Adapter being configured.
720 Unknown read/write optical drive type being configured.
721 Unknown disk or SCSI device being identified or configured.
722 Unknown disk being identified or configured.
723 Unknown CD-ROM being identified or configured.
724 Unknown tape drive being identified or configured.
725 Unknown display adapter being identified or configured.
726 Unknown input device being identified or configured.
727 Unknown async device being identified or configured.
728 Parallel printer being identified or configured.
729 Unknown parallel device being identified or configured.
730 Unknown diskette drive being identified or configured.
731 PTY being identified or configured.
732 Unknown SCSI initiator type being configured.
733 7GB 8mm tape drive being configured.
734 4x SCSI-2 640MB CD-ROM Drive
736 Quiet Touch keyboard and speaker cable being configured.
741 1080MB SCSI Disk Drive
745 16GB 4mm Tape Auto Loader
746 SCSI-2 Fast/Wide PCI Adapter
747 SCSI-2 Differential Fast/Wide PCI Adapter
749 7331 Model 205 Tape Library
751 SCSI 32-bit SE F/W RAID Adapter
754 1.1GB 16-bit SCSI disk drive being configured.
755 2.2GB 16-bit SCSI disk drive being configured.
756 4.5GB 16-bit SCSI disk drive being configured.
757 External 13GB 1.5M/s 1/4 inch tape being configured.
763 SP Switch MX Adapter
764 SP System Attachment Adapter
772 4.5GB SCSI F/W Disk Drive
773 9.1GB SCSI F/W Disk Drive

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

773
774
777
778
77c
783
789
78c
790
797
798
79c
7cc
800
803
804
806
807
80c
811
812
813
814
815
816
817
819
821
823
824
825
826
827
828
831
834
835
836
837
838
839
841
842
843

9.1GB SCSI F/W Disk Drive


9.1GB External SCSI Disk Drive
10/100Mbps PCI Ethernet Adapter being identified or configured.
POWER GXT3000P 3D PCI Graphics adapter being configured
A 1.0 GB 16-bit SCSI disk drive being identified or configured.
4mm DDS-2 Tape Autoloader
2.6GB External Optical Drive
PCI bus configuration executing
Multi-bus Integrated Ethernet Adapter being identified or configured.
TURBOWAYS 155 UTP/STP ATM Adapter being identified or configured.
Video streamer adapter being identified or configured.
ISA bus configuration executing
PCMCIA bus configuration executing
TURBOWAYS 155 MMF ATM Adapter being identified or configured.
7336 Tape Library robotics being configured
8x Speed SCSI-2 CD-ROM Drive being configured
POWER GXT800 PCI Graphics adapter being configured
SCSI Device Enclosure being configured
SSA 4-Port Adapter being identified or configured.
Processor complex being identified or configured.
Memory being identified or configured.
Battery for time-of-day, NVRAM, system I/O control logic being identified or configured.
NVRAM being identified or configured.
Floating-point processor test
Operator panel logic being identified or configured.
Time-of-day logic being identified or configured.
Graphics input device adapter being identified or configured.
Standard keyboard adapter being identified or configured.
Standard mouse adapter being identified or configured.
Standard tablet adapter being identified or configured.
Standard speaker adapter being identified or configured.
Serial Port 1 adapter being identified or configured.
Parallel port adapter being identified or configured.
Standard diskette adapter being identified or configured.
3151 adapter being identified or configured, or Serial Port 2 being identified or configured.
64-port async controller being identified or configured.
16-port async concentrator being identified or configured.
128-port async controller being identified or configured.
16-port remote async node being identified or configured.
Network Terminal Accelerator Adapter being identified or configured.
7318 Serial Communications Server being configured.
8-port async adapter (EIA-232) being identified or configured.
8-port async adapter (EIA-422A) being identified or configured.
8-port async adapter (MIL-STD 188) being identified or configured.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

843
844
845
846
847
848
849
850
851
852
854
855
857
858
859
85c
861
862
865
866
867
868
869
870
871
872
874
875
876
877
878
879
880
887
889
890
891
892
893
894
895
896
897
898

8-port async adapter (MIL-STD 188) being identified or configured.


7135 RAIDiant Array disk drive subsystem controller being identified or configured.
7135 RAIDiant Array disk drive subsystem drawer being identified or configured.
RAIDiant Array SCSI 1.3GB Disk Drive
16-port serial adapter (EIA-232) being identified or configured.
16-port serial adapter (EIA-422) being identified or configured.
X.25 Interface Co-Processor/2 adapter being identified or configured.
Token-Ring network adapter being identified or configured.
T1/J1 Portmaster adapter being identified or configured.
Ethernet adapter being identified or configured.
3270 Host Connection Program/6000 connection being identified or configured.
Portmaster Adapter/A being identified or configured.
FSLA adapter being identified or configured.
5085/5086/5088 adapter being identified or configured.
FDDI adapter being identified or configured.
Token-Ring High-Performance LAN adapter is being identified or configured.
Optical adapter being identified or configured.
Block Multiplexer Channel Adapter being identified or configured.
ESCON Channel Adapter or emulator being identified or configured.
SCSI adapter being identified or configured.
Async expansion adapter being identified or configured.
SCSI adapter being identified or configured.
SCSI adapter being identified or configured.
Serial disk drive adapter being identified or configured.
Graphics subsystem adapter being identified or configured.
Grayscale graphics adapter being identified or configured.
Color graphics adapter being identified or configured.
Vendor generic communication adapter being configured.
8-bit color graphics processor being identified or configured.
POWER Gt3(TM)/POWER Gt4(TM) being identified or configured.
POWER Gt4 graphics processor card being configured.
24-bit color graphics card, MEV2
POWER Gt1(TM) adapter being identified or configured.
Integrated Ethernet adapter being identified or configured.
SCSI adapter being identified or configured.
SCSI-2 Differential Fast/Wide and Single-Ended Fast/Wide Adapter/A.
Vendor SCSI adapter being identified or configured.
Vendor display adapter being identified or configured.
Vendor LAN adapter being identified or configured.
Vendor async/communications adapter being identified or configured.
Vendor IEEE 488 adapter being identified or configured.
Vendor VME bus adapter being identified or configured.
S /370(TM) Channel Emulator adapter being identified or configured.
POWER Gt1x(TM) graphics adapter being identified or configured.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

898
899
89c
900
901
902
903
904
905
908
910
911
912
913
914
915
916
917
918
920
921
922
923
924
925
926
927
928
929
930
931
933
934
935
936
937
942
943
944
945
946
947
948

POWER Gt1x(TM) graphics adapter being identified or configured.


3490 attached tape drive being identified or configured.
A multimedia SCSI CD-ROM is being identified or configured.
GXT110P Graphics Adapter being identified or configured.
Vendor SCSI device being identified or configured.
Vendor display device being identified or configured.
Vendor async device being identified or configured.
Vendor parallel device being identified or configured.
Vendor other device being identified or configured.
POWER GXT1000 Graphics subsystem being identified or configured.
1/4GB Fiber Channel/266 Standard Adapter being identified or configured.
Fiber Channel/1063 Adapter Short Wave
2.0GB SCSI-2 differential disk drive being identified or configured.
1.0GB differential disk drive being identified or configured.
5GB 8mm differential tape drive being identified or configured.
4GB 4mm tape drive being identified or configured.
Non-SCSI vendor tape adapter being identified or configured.
A 2.0GB 16-bit differential SCSI disk drive is being identified or configured.
A 2GB 16-bit single-ended SCSI disk drive is being identified or configured.
Bridge Box being identified or configured.
101 keyboard being identified or configured.
102 keyboard being identified or configured.
Kanji keyboard being identified or configured.
Two-button mouse being identified or configured.
Three-button mouse being identified or configured.
5083 tablet being identified or configured.
5083 tablet being identified or configured.
Standard speaker being identified or configured.
Dials being identified or configured.
Lighted program function keys (LPFK) being identified or configured.
IP router being identified or configured.
Async planar being identified or configured.
Async expansion drawer being identified or configured.
3.5-inch diskette drive being identified or configured.
5.25-inch diskette drive being identified or configured.
An HIPPI adapter is being configured.
POWER GXT 100 graphics adapter being identified or configured.
A 3480 or 3490 control unit attached to a System/370 Channel
Emulator/A adapter configured.
100MB ATM adapter being identified or configured
1.0GB SCSI differential disk drive being identified or configured.
Serial port 3 adapter is being identified or configured.
A 730MB SCSI disk drive is being configured.
Portable disk drive being identified or configured.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

948 Portable disk drive being identified or configured.


949 Unknown direct bus-attach device being identified or configured.
950 Missing SCSI device being identified or configured.
951 670MB SCSI disk drive being identified or configured.
952 355MB SCSI disk drive being identified or configured.
953 320MB SCSI disk drive being identified or configured.
954 400MB SCSI disk drive being identified or configured.
955 857MB SCSI disk drive being identified or configured.
956 670MB SCSI disk drive electronics card being identified or configured.
957 120MB DBA disk drive being identified or configured.
958 160MB DBA disk drive being identified or configured.
959 160MB SCSI disk drive being identified or configured.
960 1.37GB SCSI disk drive being identified or configured.
964 Internal 20GB 8mm tape drive identified or configured.
968 1.0GB SCSI disk drive being identified or configured.
970 Half-inch, 9-track tape drive being identified or configured.
971 150MB 1/4-inch tape drive being identified or configured.
972 2.3GB 8mm SCSI tape drive being identified or configured.
973 Other SCSI tape drive being identified or configured.
974 CD-ROM drive being identified or configured.
975 An optical disk drive is being identified or configured.
977 M-Audio Capture and Playback Adapter being identified or configured.
981 540MB SCSI-2 single-ended disk drive being identified or configured.
984 1GB 8-bit disk drive being identified or configured.
985 M-Video Capture Adapter being identified or configured.
986 2.4GB SCSI disk drive being identified or configured.
987 An Enhanced SCSI CD-ROM drive is being identified or configured.
989 200MB SCSI disk drive being identified or configured.
990 2.0GB SCSI-2 single-ended disk drive being identified or configured.
991 525MB 1/4-inch cartridge tape drive being identified or configured.
994 5GB 8mm tape drive being identified or configured.
995 1.2GB 1/4 inch cartridge tape drive being identified or configured.
996 A single-port, multi-protocol communications adapter is being identified or configured.
997 FDDI adapter being identified or configured.
998 2.0GB 4mm tape drive being identified or configured.
999 7137 or 3514 Disk Array Subsystem being configured.
D81 T2 Ethernet Adapter being configured.

Table 5-1. Service Processor Checkpoints.


E010 Starting Service Processor self-tests
E012 Begin to set up Service Processor heaps
E020 Configuring CMOS

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

E020
E021
E040
E042
E043
E04F
E070
E071
E072
E075

Configuring CMOS
Configuring NVRAM
Configuring Service Processor I/O
Configuring modem on serial port 1
Configuring modem on serial port 2
Modem configuration successful Re-IPL.
Service Processor is calling the Service Center
Service Processor is calling System Administration
Service Processor is calling the pager
Entering Service Processor menus

Before replacing any parts, ensure the S1 and S2 ports either have no cables attached or the
cables are only attached to TTY or Modem devices.
E07A
E07B
E07F
E080
E081
E082
E090
E0EF

Waiting for keystroke from local console


Waiting for keystroke from remote console
Service Processor exiting from session with local or remote terminal.
Service Processor flash update in progress
Service Processor flash update completed
Service Processor promoting flash from side B to side A.
Changing the system processor configuration.
End of Service Processor reporting

Firmware Checkpoints
E100
E101
E102
E103
E104
E105
E108
E109
E10A
E10B
E10C
E10D
E10E
E10F
E110

Reserved
Video enabled, extended memory test
Firmware restart
Set memory refresh (composite img)
Set memory refresh (recovery block)
Transfer control to Operating System (normal boot).
Run recovery block base memory (test 2K),
Copy CRC verification code to RAM
Turn on cache
Flush cache
Jump to CRC verification code in RAM
Compute composite image CRC
Jump back to ROM
Transfer control to Open Firmware
Turn off cache, Check if composite image CRC is valid

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

E111
E112
E113
E114
E115
E116
E117
E118
E119
E11A
E11B
E11C
E11D
E11E
E11F
E120
E121
E125
E126
E127
E128
E129
E12A
E12B
E12C
E12D
E12E
E12F
E130
E131
E132
E133
E134
E135

GOOD CRC - jump to composite image


BAD CRC - initialize base memory, stack
BAD CRC - copy uncompressed recovery block code to RAM
BAD CRC - jump to code in RAM
BAD CRC - turn on cache
BAD CRC - copy recovery block data section to RAM
BAD CRC - Invalidate and flush cache, set TOC
BAD CRC - branch to high level recovery control routine.
Initialize base memory, stack
Copy uncompressed recovery block code to RAM
Jump to code in RAM
Turn on cache
Copy recovery block data section to RAM
Invalidate and flush cache, set TOC
Branch to high level control routine.
Initialize I/O and early memory block
Initialize S.P.
Clear PCI devices command reg, go forth
Check valid image - start
Check valid image - successful
Disable interrupts, set int vectors for O.F.
Validate target RAM address
copy to RAM, flush cache
Set MP operational parameters
Set MP cpu node characteristics
Park secondary processors in parking lot
Primary processor sync
Unexpected return from Open Firmware (system lockup)
Build device tree
Create ROOT node
Create cpus node
Create L2 Cache node
Create memory node
Create memory DIMM node

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

E136
E137
E138
E139
E13A
E140
E149
E14C
E14D
E14E
E14F
E150
E151
E152
E153
E154
E155
E156
E15A
E15B
E15C
E15D
E15E
E15F
E160
E161
E162
E163
E164
E165
E166
E167
E168
E169

Test memory
Create openprom node
Create options node
Create aliases node and system aliases
Create packages node
PReP style load
Create boot mgr node
Create terminal-emulator node
Loading boot image
Create client interface node/directory
NVRAM initialization
Create host (primary) PCI controller node
Probing primary PCI bus
Probing for adapter FCODE, evaluate if present
End adapter FCODE, probe/evaluate
Create PCI bridge node
Probing PCI bridge secondary bus
Create PCI ethernet node
Create 64 bit host (primary) PCI controller node
Transferring control to Operating System (service mode boot)
Probe primary 64 bit PCI bus
Create host PCI controller node
Create MPIC node
Adapter VPD probe
CPU node VPD creation
Create memory VPD
SP node VPD creation
Create CPU VPD
Create PCI graphic node (P9)
Create planar-clock VPD
Create CEC VPD
Create 7 EIA-Unit I/O Drawer VPD
Create PCI graphic node (S3)
Create 10 EIA-Unit I/O Drawer VPD

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

E170
E171
E174
E175
E176
E177
E178
E180
E181
E182
E183
E184
E185
E186
E187
E188
E189
E18A
E18B
E18C
E190
E191
E193
E196
E19B
E19C
E19D
E19E
E1AD
E1B0
E1B1
E1B2
E1B3

Start of PCI Bus Probe


Executing PCI-Delay function
Establishing host connection (incorrect IP parameter)
BootP request Refer checkpoint E174.
TFTP file transfer
Transfer failure due to TFTP error condition
Create PCI token ring node
Service Processor Command setup
Send drawer data to I/O planar
Request 10 EIA-Unit I/O Drawer I/O planar VPD
Service Processor Post
Request 10 EIA-Unit I/O Drawer drawer interface panel VPD
Add 10 EIA-Unit I/O Drawer drawer interface panel VPD to NVram and device tree
Request PS1 VPD
Add PS1 VPD to NVRAM and device tree
Request PS2 VPD
Add PS2 VPD to NVRAM and device tree
Request fan monitoring card VPD
Add fan monitoring card VPD to NVRAM and device tree
VPD and data communications with I/O planar complete
Create ISA node
Create ISA reserved node
Initialize Super I/O
Probe ISA bus
Create Service Processor node
Create tablet node
Create nvram node
Real time clock (RTC) initialization Refer to error code
28030xxx in "Firmware/POST Error Codes".
See description of checkpoint E1DE
Create lpt node
Create serial node
Create audio node
Create 8042 node

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

E1B6
E1BA
E1BB
E1BC
E1BD
E1BE
E1BF
E1C0
E1C5
E1C6
E1D0
E1D3
E1D4
E1DB
E1DC
E1DD
E1DE
E1DF
E1E0
E1E1
E1E2
E1E3
E1E4
E1E5
E1E6
E1E7
E1E8
E1E9
E1F0
E1F1
E1F2
E1F3

Probe for (ISA) keyboard


Enable L2 cache
Set cache parms for burst
Set cache parms for 512KB
Probe for (ISA) mouse
Create op-panel node
Create pwr-mgmt node
Create ISA ethernet node
Create ISA interrupt controller (pic) node
Create DMA node
Create PCI SCSI node
Create (* wildcard *) SCSI block device node (SD)
Create (* wildcard *) SCSI byte device node (ST)
Create floppy controller (fdc) node
Dynamic console selection. (maybe cable or keyboard)
Early processor exception
Alternating pattern of E1DE and E1AD is used to
indicate a Default Catch condition before the firmware "checkpoint"
word is available.
Create diskette drive (disk) node
Program flash
Flash update complete
Initialize System I/O
PReP boot image initialization.
Initialize Super I/O with default values
XCOFF boot image initialization
Set up early memory allocation heap
PE boot image initialization
Initialize primary diskette drive (polled mode)
ELF boot image initialization
Start O.B.E.
Begin self test sequence on boot device(s) Begin SMS.
Power-On Password prompt.
Privileged-Access Password prompt

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

E1F5
E1F6
E1F7
E1FB
E1FD

Build boot device list


Determine boot device sequence
No boot image located
Scan SCSI bus for attached devices
The operator panel will alternate between the code E1FD
and another Exxx code, where
Exxx is the point at which the error occurred.
E440 Validate nvram, initialize partitions as needed. Verify that
the system firmware levels are at the current release levels, update
as necessary. Replace Service Processor Card
E441 Generate /options node nvram configuration variable properties
E442 Validate nvram partitions
E443 Generate nvram configuration variable dictionary words.
Suspect a system firmware problem
E500 Configure Remote I/O subsystem
E5xy (E511 - E5FF)
Where x is not equal to 0, and y is not equal to 0. Configure Remote I/O subsystem components
The E5xy (E511 to E5FF) codes are reserved for activities relating to configuration or testing of the I/O subsystem, or
remote I/O subsystem. A hang at one of these codes implies that
a severe error occurred during the programming of I/O subsystem registers or when interacting with adapters plugged into
the system. The last two digits in the checkpoint can be used to help isolate the location of the I/O activity that caused the
problem.
"x" indicates the I/O drawer number. "y" indicates the
PCI bus occurance.
If x=_, then the I/O Drawer is:
X = I/O Drawer
1=0
2=1
3=2
4=3
If y=_, then the PCI Bus is:
Y = PCI Bus
open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

1=0
2=1
3=2
4=3
Base Level Error Codes
________________________________________________________
Digit 1 Digit 2 Digit 3 | Type of Failure
blank blank
| blank | None
8

|
| Fan P49B
4

|
| Fan P49C.
u

|
| = Digit 1 Codes 8 and 4.

8
|
| Fan at P47.

4
|
| Fan P46A or P46 or both.

2
|
| Fan P49A.
|
6
|
| = Digit 2 Codes 4 and 2.
|
c
|
| = Digit 2 codes 8 and 2.
|
u
|
| = Digit 2 codes 8 and 4.
|Inverted F|
| = Digit 2 codes 8, 4 and 2.
|
|
8
| Excessive temperature in PS
|
|
4
| Power failure in PS
|
|
2
| Power failure outside PS
|
|
1
| Loss of primary power.

Service Request Number List for Multiple Bus Systems


Replace FRU parts in the order by which the "Failing Function Codes" are
listed.
Service
Request
Number

Failing
Function
Codes

Description and Action


(Unless otherwise indicated use Chapter 12.
"MAP 0210: General Problem Resolution".)

SRN
Src.

10112

1XXXX

open in browser PRO version

Description: Format Degraded. A Format


operation has been ended before it has completed.
Action: Refer to the Service Guide for the
unit containing the disk drive.
Description: Disk drive module error.
Action: Refer to the Service Guide for the
unit containing the disk drive.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

Note: In this SRN, an X represents a digit


0 through F.
20PAA

Description: An open SSA loop has been detected.


Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

21PAA

Description: An SSA 'Threshold exceeded'


link error has been detected.
Action: Go to the Intermittent Link Error
MAP in the SSA Adapters: User's Guide and
Maintenance Information.

to
29PAA

2A002

Description: Async code 02 has been


received. Probably, a software error has occurred.
Action: Refer to the user's or service
guide for the unit containing the disk drive.

2A003

Description: Async code 03 has been


received. Probably, a software error has occurred.
Action: Refer to the user's or service
guide for the unit containing the disk drive.

2A004

Description: Async code 04 has been


received. Probably, a software error has occurred.
Action: Refer to the user's or service
guide for the unit containing the disk drive.

2A005

Description: Async code 05 has been


received. This code indicates that a disk
drive module has detected the loss of
redundant power or cooling.
Action: Refer to the user's or service
guide for the unit containing the disk drive.

2A006

Description: Async code 06 has been


received. This code indicates that a disk
drive module has detected the loss of
redundant power or cooling.
Action: Refer to the user's or service
guide for the unit containing the disk drive.

2A106

Description: Async code 06 has been


received. This code indicates that multiple
disk drive modules have detected the loss
of redundant power or cooling.
Action: Refer to the user's or service
guide for the unit containing the disk drives.

2A206

Description: A disk drive module has


detected that one of its SSA links has
failed the POST.
Action: Refer to the user's or service
guide for the unit containing the disk drive.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

2FFFF

Description: An async code that is not


valid has been received.
Action: Refer to the user's or service
guide for the unit containing the disk drive.

300C0

Description: A disk drive module has


detected the loss of redundant power or cooling.
Action: Refer to the user's or service
guide for the unit containing the disk drive.

301C0

Description: Multiple disk drive modules


have detected the loss of redundant power or cooling.
Action: Refer to the user's or service
guide for the unit containing the disk drives.

303FF

Description: An SCSI status that is not


valid has been received.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

31000

Description: The disk drive has been


reset by the adapter. The disk drive might
be going to fail.
Action: Refer to the user's or service
guide for the unit containing the disk drive.

40000

Description: The SSA adapter card has failed.


Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

40004

Description: A 4MB DRAM module in adapter


card slot 0 has failed.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

40008

Description: An 8MB DRAM module in


adapter card slot 0 has failed.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

40016

Description: A 16MB DRAM module in


adapter card slot 0 has failed.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

40032

Description: A 32MB DRAM module in


adapter card slot 0 has failed.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

40064

Description: A 64MB DRAM module in


adapter card slot 0 has failed.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

40128

Description: A 128MB DRAM module in


adapter card slot 0 has failed.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

41004

Description: A 4MB DRAM module in adapter


card slot 1 has failed.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

41008

Description: An 8MB DRAM module in


adapter card slot 1 has failed.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

41016

Description: A 16MB DRAM module in


adapter card slot 1 has failed.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

41032

Description: A 32MB DRAM module in


adapter card slot 1 has failed.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

41064

Description: A 64MB DRAM module in


adapter card slot 1 has failed.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

41128

Description: A 128MB DRAM module in


adapter card slot 1 has failed.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

42000

Description: The SSA adapter has detected


that both DRAM modules are failing.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

42200

Description: Other adapters on the SSA


loop are using levels of microcode that are
not compatible.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

42500

Description: An SSA adapter has detected


a failure in its fast-write cache.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

42510

Description: Not enough DRAM available to


run an SSA fast-write cache.
Action: Refer to the SSA Adapters: User's

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

Guide and Maintenance Information.


42515

Description: An SSA adapter is attempting


to use its fast-write cache, but a
fast-write cache card is not installed.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

42520

Description: An SSA fast-write cache


failure has been detected.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

42521

Description: An SSA fast-write cache


failure has been detected.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

42522

Description: An SSA fast-write cache


failure has been detected.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

42523

Description: A incorrect version number


has been detected in an SSA resource.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

42524

Description: An SSA write-cache resource


is not available.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

42525

Description: An incorrect SSA write-cache


resource has been identified.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

42526

Description: This adapter does not


support the SSA Fast-Write Cache Option.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

42527

Description: A dormant SSA fast-write


cache entry exists.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

42528

Description: A fast-write SSA disk drive


has been detected that was previously
unsynchronized, but has since been
configured on a different adapter.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

43PAA

Description: An SSA device on the loop is


preventing the completion of the loop configuration.
Action: Refer to the user's or service
guide for the unit containing the device.

44PAA

Description: A disk drive module has a


'Failed' status.
Action: Refer to the Service Guide for the
unit containing the disk drive.

45PAA

Description: The SSA adapter has detected


an open SSA loop. This problem is caused
either by a disk drive module that is
failing, or by a disk drive module that has
been turned off from another using system
on the same SSA loop. (That using system
has itself been turned off.)
Action: Refer to the user's or service
guide for the unit containing the disk drive.

46000

Description: A RAID array is the Offline


state because more than one disk drive is
not available. At least one member disk
drive of the array is present, but more
than one member disk drive is missing.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

46500

Description: A member disk drive is


missing from a SSA array.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

47000

Description: An attempt has been made to


store in the SSA adapter the details of
more than 32 RAID arrays.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

47500

Description: Part of the RAID array data


might have been lost.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

48000

Description: The SSA adapter has detected


a link configuration that is not valid.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

48600

Description: Member disk drives of an SSA


array are not all on the same SSA loop, in
a multiple-host-system configuration.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

48700

Description: Two or more member disk


drives of an SSA array are on different loops.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

48800

Description: The SSA RAID strip table is not valid.


Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

48900

Description: An SSA array is not


available; a multiple-device error has occurred.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

48950

Description: An SSA disk drive has failed


during a building operation.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

49000

Description: A RAID array is in the


Degraded state because a disk drive is not
available to the array, and a write command
has been sent to that array.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

49100

Description: A RAID array is in the


Exposed state because a disk drive is not
available to the array.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

49500

Description: No hot spare disk drives are


available for a RAID array that is
configured for hot spare disk drives.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

49700

Description: The parity for the RAID


array is not complete.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

4A100

Description: The adapter cannot


initialize an SSA disk drive.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

4BPAA

Description: An SSA disk drive at PAA


cannot be configured, because its UID
cannot be read.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

50000

Description: The SSA adapter failed to

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

respond to the device driver.


Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.
50001

Description: A data parity error has occurred.


Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

50002

Description: An SSA adapter DMA error has occurred.


Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

50004

Description: Channel check.


Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

50005

Description: A software error has occurred.


Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

50006

Description: A channel check has occurred.


Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

50007

Description: The IOCC detected an


internal error.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

50008

Description: Unable to read or write the


POS registers.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

50010

Description: An SSA adapter or


device-driver protocol error has occurred.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

50012

Description: The SSA adapter microcode has hung.


Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

50013

Description: The SSA adapter card has failed.


Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

50100

Description: An attempt was made to log


an error against a pdisk that is not
available to the using system.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

50200

Description: Duplicate SSA cluster number detected.


Action: Refer to the SSA Adapters: User's

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

Guide and Maintenance Information.


50411

Description: SSA adapter has detected an


SS_SIC_CLASS1 error.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

50425

Description: SSA adapter has detected an


SS_LINK_CONFIG_FAILED error.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

504XX

Description: The SSA adapter microcode has hung.


Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

60000

Description: The SSA adapter is missing


from the expected configuration.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

60200

Description: The SSA unit cannot be turned on.


Action: Refer to the Service Guide for the unit.

60210

Description: A disk drive module has its


Check light on.
Action: Refer to the Service Guide for the
unit containing the disk drive.

60220

Description: A fan-and-power-supply
assembly has its Check light on.
Action: Refer to the Service Guide for the
unit containing the device that the error
was reported against.

60230

Description: The SSA unit has an


unexpected Check light on.
Action: Refer to the Service Guide for the unit.

60240

Description: An SSA configuration problem


has occurred. An SSA device cannot be configured.
Action: Refer to the Service Guide for the
unit containing the device.

7XXXX

Description: An SSA disk drive is missing


from the expected configuration of the SSA loop.
Action: Refer to the user's or service
guide for the unit containing the disk
drive.Note: In this SRN, an X represents a digit
0 through F.

D0000

Description: The using system cannot


configure the disk drive module.
Action: Refer to the user's or service
guide for the unit containing the disk drive.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

D0100

Description: Unable to clear a disk drive


module reservation.
Action: Refer to the user's or service
guide for the unit containing the disk drive.

D0101

Description: The disk drive module has


been reserved since the diagnostics started.
Action: Refer to the user's or service
guide for the unit containing the disk drive.

D0200

Description: The disk drive module timed


out while the diagnostics were running.
Action: Refer to the user's or service
guide for the unit containing the disk drive.

D0300

Description: The disk drive module failed


the diagnostic test.
Action: Refer to the user's or service
guide for the unit containing the disk drive.

D0400

Description: The disk drive module is not


ready while the diagnostics are running.
Action: Refer to the user's or service
guide for the unit containing the disk drive.

D0450

Description: The Format operation that


was started on this disk drive module has
not yet finished.
Action: Refer to the user's or service
guide for the unit containing the disk drive.

D0460

Description: A Format operation has been degraded.


Action: Refer to the user's or service
guide for the unit containing the disk drive.

D4000

Description: The diagnostics cannot


configure the SSA adapter.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

D4100

Description: The diagnostics cannot open


the SSA adapter.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

D4300

Description: The diagnostics have


detected an SSA adapter POST failure.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

D44XX

Description: The diagnostics have


detected that the SSA adapter has corrupted
the microcode, but cannot download a new
version of the microcode.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

Action: Refer to the SSA Adapters: User's


Guide and Maintenance Information.
Note: In this SRN, an X represents a digit
0 through F.
DFFFF

Description: A command or parameter that


has been sent or received is not valid.
This problem is caused either by the SSA
adapter, or by an error in the microcode.
Action: Refer to the SSA Adapters: User's
Guide and Maintenance Information.

101-000

Description: The system hung while


attempting to configure a device.
Action: Use MAP 1540.

101-185

Description: A checkstop occurred.


Action: Use MAP 1540 in the system unit
service guide to isolate the cause.

101-517

Description: The system unit failed to IPL.


Action: Use MAP 1540.

101-518

Description: CD-ROM read problems after boot.


Note:The boot record was read from the
CD-ROM disk. However, errors occurred when
trying to mount the CD-ROM file system.
This problem can be caused by SCSI device
addressing, SCSI terminator, open PTC, SCSI
cable, etc.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure"

101-521
to
101-538

101-544

open in browser PRO version

Description: The configuration manager


detected an error.
Action: If you are running the diagnostics
from a disk, try running the diagnostics
from a CD-ROM. If the diagnostics run
correctly from CD-ROM, the problem may be
damaged data on the disk. Contact your
software support facility. If a different
problem occurs when you run the diagnostics
from CD ROM, correct that problem. If you
were running from a CD ROM at first, or
have the same problem on CD ROM that you
had when running diagnostics from disk then
go to MAP 1540, in either the service guide
or the installation and service guide for
this system unit.
Description: Disk read problems occurred after booting.
errors occurred when trying to open the
disk drive. This problem can be caused by
SCSI device addressing, SCSI terminator,

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

open PTC, SCSI cable, etc.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure"
101-551

Description: The system hung while


loading the software. This can be caused by
a hardware or software problem.
Action: Run the diagnostics from CD-ROM.
Start at Chapter 4. "MAP 0020: Problem
Determination Procedure", Step 14. If the
diagnostics run correctly from CD-ROM, the
problem may be damaged disk data. Consider
having the customer contact Software
Support before reinstalling the operating
system on the disk. If you still get the
same SRN, go to MAP 1540 in either the
service guide or the installation and
service guide for this system unit.

to
101-557

101-558

101-559

Description: There is not enough memory


to execute diagnostics.
Action: There must be a minimum of 16MB of
installed memory. If the system has 16MB or
more of memory installed, suspect a problem
with a memory card.
Description: The system halted while
software was loading. This problem may be
attributed to either hardware or software.
Action: Use the CD ROM based diagnostics if
not yet used. If the same SRN is generated
from the CD ROM diagnostics, go to MAP 1540
in the system unit service guide for
problem isolation.
If the SRN is not generated when using the
CD ROM, suspect a problem with the system's software.

to
101-599

101-711

xxx

to
101-726

open in browser PRO version

Description: The system hung while trying


to configure an unknown resource.
Action: Run diagnostics from CD-ROM. Start
at Chapter 4. "MAP 0020: Problem
Determination Procedure", Step 14. If you
still get the same SRN, refer to "Failing
Function Code List" and find the FFC that
matches the last three digits of the SRN.
Suspect the device adapter or device
itself. If more than one adapter or device
is installed, isolate the failing resource
by removing the adapters or devices one at
a time and checking if the system stops
with the same value in the three-digit
display.Note: xxx corresponds to the last three
digits of the SRN.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

101-727

Description: The system hung while trying


to configure an asynchronous adapter.
Action: Use MAP 1540 in the installation
and service guide for this system unit.
Suspect a problem with one of the async adapters.

101-7C1

7C1

Description: The system unit halted while


configuring an audio subsystem.

101-888

210

Description: The system does not IPL.


Action: Use Chapter 16. "MAP 0260: System
Hangs During Resource Configuration".

227
101-c32

101-c33

101-xxx

E10

Description: The system hung while


indicating that a direct-attached display
was selected as the console.
Action: Go to MAP 1540 in either the
service guide or the installation and
service guide for this system unit. Suspect
the graphics adapter being used for the
display console first.
Description: The system hung while
indicating that a TTY terminal is the
system console.
Action: Go to MAP 1540 in either the
service guide or the installation and
service guide for this system unit. Suspect
the graphics adapter being used for the
display console first.

xxx
227

151

Description: The system hung while


configuring a resource. The last three
digits identify the failing function code
for the resource being configured.
Action: Use Chapter 16. "MAP 0260: System
Hangs During Resource Configuration".

103-151

103-202
to
103-210

Description: Unexpected interrupt.


Action: Go to MAP 1540 in either the
service guide or the installation and
service guide for this system unit.

109-200

Description: The system crashed while


being run by the customer.
Action: Use Chapter 4. "MAP 0020: Problem
Determination Procedure", and get a new SRN.

110-101

Description: The diagnostics did not


detect an installed resource.
Action: If this SRN appeared when running

open in browser PRO version

Description: The time-of-day battery failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

concurrent diagnostics, then run concurrent


using the diag -a command, otherwise use
Chapter 18. "MAP 0290: Missing Resource
Problem Resolution".
110-908

908

Description: The system halted while


diagnostics were executing.

110-921
to
110-926

110-935

935

Description: The system halted while


diagnostics were executing.

110-946

946

Description: The system halted while


diagnostics were executing.

110-xxx

Description: The system halted while


diagnostics were executing.
Note: xxx corresponds to the last three
digits of the SRN.

xxx
812

Description: The system halted while


diagnostics were executing.
Note: xxx corresponds to the last three
digits of the SRN. If your 110 SRN is not
listed below, use the 110-xxx procedure.

xxx
221

111-259

111-725

111-736

111-78C

Description: Cannot display readable


information on the terminal.
Action: Use Chapter 17. "MAP 0280: Boot
Problem Resolution" Entry 3.
725

736
821

Description: Cannot display readable


information on the display.
Note: Suspect the display adapter attached
to the console display.
Action: Use Chapter 17. "MAP 0280: Boot
Problem Resolution"
Description: The keyboard does not respond.
Action: Use Chapter 17. "MAP 0280: Boot
Problem Resolution" Entry 1.

PCI adapter
E10

111-82C

111-922

Description: I/O bus problem.


Action: Use Chapter 12. "MAP 0210: General
Problem Resolution".
Note: PCI adapter refers to the adapters
you made note of when using Chapter 11.
"MAP 0080 System Bus Problem Isolation".
Description: Cannot display readable
information on the display.
Action: Go to Chapter 17. "MAP 0280: Boot
Problem Resolution" Entry 2.

922

open in browser PRO version

Description: The keyboard does not respond.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

111-923
111-947
111-999
2E6-212
2E6-213
2E6-214
2E6-215
2E6-216
2E6-217
2E6-218
2E6-219
2E6-220

B
B
D
D
D
D
D
D
D
D
D
D

923
221
210
2E6
2E6
2E6
2E6
2E6
2E6
2E6
2E6
2E6

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

2E6-221

2E6

Description: Miss compare during the


write/read of the configuration register.

2E6-222

2E6

Description: Error during the write/read


of the memory register.

2E6-223

2E6

Description: Miss compare during the


write/read of the memory I/O register.

2E6-224

2E6

Description: Error reading the PCI


configuration register.

2E6-225
2E6-230
2E6-231
2E6-232
2E6-240

D
D
D
D
D

2E6
D50
D50
D50
2E6

Description:
Description:
Description:
Description:
Description:

2E6-301

2E6

Description: Configuration open failed for


parent bus. SOFTWARE

2E6-700

2E6

Description: Error log analysis indicates


a PCI SCSI adapter failure. Software

2E6-701

2E6

Description: Error log analysis indicates


a PCI SCSI adapter failure. Software

2E6-702

2E6

Description: Error log analysis indicates


a PCI SCSI adapter failure. Software

2E6-703

2E6

Description: Error log analysis indicates


a PCI SCSI adapter failure. Software

2E6-704

2E6

Description: Error log analysis indicates


a PCI SCSI adapter failure. Software

2E6-705

2E6

Description: Error log analysis indicates


a PCI SCSI adapter failure. Software

2E6-800

2E6

Description: Error log analysis indicates


a PCI SCSI adapter PTC failure.

open in browser PRO version

The keyboard does not respond.


System beeper not functioning correctly.
System does not perform a soft reset.
FIFO empty bit set.
FIFO empty bit clear.
FIFO full bit set.
FIFO full bit clear.
FIFO data miscompare.
SCSI FIFO data miscompare.
SCSI FIFO underflow.
SCSI parity error.
SCSI FIFO flags error.

Adapter POST failed.


Arbitration test failed.
Function could not complete.
SCSI bus data miss compare.
No terminal power.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

2E6-802

2E6

Description: Error log analysis indicates


a PCI SCSI bus failure.

2E7-212
2E7-213
2E7-214
2E7-215
2E7-216
2E7-217
2E7-218
2E7-219
2E7-220

D
D
D
D
D
D
D
D
D

2E7
2E7
2E7
2E7
2E7
2E7
2E7
2E7
2E7

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

2E7-221

2E7

Description: Miscompare during the


write/read of the configuration register.

2E7-222

2E7

Description: Error during the write/read


of the memory register.

2E7-223

2E7

Description: Miscompare during the


write/read of the memory I/O register.

2E7-224

2E7

Description: Error reading the PCI


configuration register.

2E7-225
2E7-230
2E7-231
2E7-232
2E7-240

D
D
D
D
D

2E7
D50
D50
D50
2E7

Description:
Description:
Description:
Description:
Description:

2E7-301

2E7

Description: Configuration open failed for


parent bus. software

2E7-700

2E7

Description: Error log analysis indicates


a PCI SCSI adapter failure. software

2E7-701

2E7

Description: Error log analysis indicates


a PCI SCSI adapter failure. software

2E7-702

2E7

Description: Error log analysis indicates


a PCI SCSI adapter failure. software

2E7-703

2E7

Description: Error log analysis indicates


a PCI SCSI adapter failure. software

2E7-704

2E7

Description: Error log analysis indicates


a PCI SCSI adapter failure. software

2E7-705

2E7

Description: Error log analysis indicates


a PCI SCSI adapter failure. software

2E7-800

2E7

Description: Error log analysis indicates


a PCI SCSI adapter PTC failure.

open in browser PRO version

FIFO
FIFO
FIFO
FIFO
FIFO
SCSI
SCSI
SCSI
SCSI

empty bit set.


empty bit clear.
full bit set.
full bit clear.
data miscompare
FIFO data miscompare.
FIFO underflow.
parity error.
FIFO flags error.

Adapter POST failed.


Arbitration test failed.
Function could not complete.
SCSI bus data miscompare.
No terminal power.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

2E7-802

2E7

Description: Error log analysis indicates


a PCI SCSI bus failure.

2EF-101
650-xxx
651-140
651-150
651-151

E
D
D
D
D

751
650
165
166
152

Description: Post indicates an adapter failure.


Description: Disk drive configuration failed.
Description: Operator panel display test failed
Description: Sensor indicates a fan has failed.
Description: Sensor indicates a voltage is
outside the normal range.

651-152

2E1

Description: Sensor indicates an


abnormally high internal temperature.
Action: Verify that:
1. The room ambient temperature is within
the system operating environment.
2. There is unrestricted air flow around
the system.
3. All system covers are closed.
4. There are no fan failures.
If none of these problems exist, then
proceed with Chapter 13. "MAP 0220 Hot Plug
FRU Problem Resolution".

651-153

651-159

651-160

166

Description: Sensor indicates a fan is


turning too slowly.

651-161

152

Description: Sensor indicates a voltage is


outside the normal range.

651-162

2E1

Description: Sensor indicates an


abnormally high internal temperature.
Action: Verify that:
1. The room ambient temperature is within
the system operating environment.
2. There is unrestricted air flow around
the system.
3. All system covers are closed.
4. There are no fan failures.
If none of these problems exist, then
proceed with Chapter 13. "MAP 0220 Hot Plug
FRU Problem Resolution".

651-163

651-169

152

Description: Sensor indicates a power


supply has failed.
Description: Sensor indicates a FRU has
failed.to replace the FRU(s) that are identified
on the diagnostics problem report screen.

152

Description: Sensor indicates a power


supply has failed.
Description: Sensor indicates a FRU has
failed the FRUs that are identified on the
diagnostics problem report screen.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

651-170

Description: Sensor status not available.


Action: Contact your support person.

651-171

Description: Sensor status not available


Action: Contact your support person.

651-600

Description: Uncorrectable memory or


unsupported memory.
Action: Examine the memory modules and
determine if they are supported types. If
the modules are supported, then replace the
appropriate memory module(s).

651-601

Description: Missing or bad memory


Action: If the installed memory matches the
reported memory size, then replace the
memory: otherwise, add the missing memory.

651-602
651-603
651-608
651-609
651-610
651-611
651-612
651-613
651-614
651-615

G
G
G
G
G
G
G
G
G
G

2C5
2C6
D01
D01
210
210
D01
D01
214
292

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

Bad or missing memory


Bad or missing memory
Bad L2 Cache
Missing L2 Cache
CPU internal error
CPU internal cache error
L2 Cache parity or multi-bit ECC error
L2 cache ECC single-bit error
Time-out error waiting for memory controller
Time-out error waiting for I/O

651-619

651-620

2C5

Description: ECC correctable error


Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

651-621
651-622
651-623
651-624

G
G
G
G

2C6
2C5
2C6
214

Description:
Description:
Description:
Description:

ECC correctable error


Correctable error threshold exceeded
Correctable error threshold exceeded
Memory controller internal error

651-625
651-626
651-627
651-628

G
G
G
G

214
214
214
210

Description:
Description:
Description:
Description:

Memory Address (Bad address going to memory)


Memory Data error (Bad data going to memory)
Memory time-out error
Processor time-out error

651-629

Description: Error log analysis indicates


an error detected by the CPU. The error log
indicates the following physical FRU
location(s) as the probable cause(s).
Action: Use the physical location codes to
replace the FRUs that are identified on the
diagnostics problem report screen.

Description: Error log analysis indicates


and error detected by the memory
controller. The error log indicates the

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

following physical FRU location(s) as the


probable cause(s).
Action: Use the physical location codes to
replace the FRUs that are identified on the
diagnostics problem report screen.
651-630
651-631
651-632

G
G
G

307
307
306

Description: I/O Expansion Bus Parity Error.


Description: I/O Expansion Bus Time-out Error.
Description: Internal Device Error.

651-633

307

Description: I/O Expansion Unit not in an


operating state.

651-634

307

Description: Internal Device Error.

651-639

Description: Error log analysis indicates


an error detected by the I/O. The error log
indicates the following physical FRU
location(s) as the probable cause(s).
Action: Use the physical location codes to
replace the FRUs that are identified on the
diagnostics problem report screen.

651-640
651-641
651-642

G
G
G

2D5
2D6
2D3

Description: I/O general bus error.


Description: Secondary I/O general bus error
Description: Internal Service Processor memory error

651-643

2D3

Description: Internal Service Processor


firmware error

651-644

2D3

Description: Other internal Service


Processor hardware error

651-650
651-651
651-652
651-653
651-654
651-655
651-656
651-657
651-660
651-661
651-662
651-663
651-664
651-665
651-666
651-667
651-670
651-671
651-672
651-673
651-674
651-675

G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G

E17
E18
300
301
302
303
304
305
E17
E18
300
301
302
303
304
305
E17
E18
300
301
302
303

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

open in browser PRO version

ECC correctable error.


ECC correctable error.
ECC correctable error.
ECC correctable error.
ECC correctable error.
ECC correctable error.
ECC correctable error.
ECC correctable error.
Correctable error threshold
Correctable error threshold
Correctable error threshold
Correctable error threshold
Correctable error threshold
Correctable error threshold
Correctable error threshold
Correctable error threshold
Bad or missing memory.
Bad or missing memory.
Bad or missing memory.
Bad or missing memory.
Bad or missing memory.
Bad or missing memory.

exceeded.
exceeded.
exceeded.
exceeded.
exceeded.
exceeded.
exceeded.
exceeded.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

651-676
651-677
651-710

G
G
G

304
305
214

Description: Bad or missing memory.


Description: Bad or missing memory.
Description: Address/Data parity error on
Processor bus

651-711

214

Description: Address/Data parity error on


Processor bus

651-712

214

Description: Address/Data parity error on


Processor bus

651-713
651-714
651-715
651-720
651-721
651-722
651-723
651-724
651-725
651-730

G
G
G
G
G
G
G
G
G
G

214
214
214
2C5
2C6
210
210
292
292

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

651-731

2C8

Description: Intermediate or System Bus


Address Parity Error.

651-732

2C8

Description: Intermediate or System Bus


Data Parity Error.

Transfer error on Processor bus


Transfer error on Processor bus
Transfer error on Processor bus
Uncorrectable Memory Error
Uncorrectable Memory Error
Processor bus parity error
Processor bus parity error
I/O Host Bridge time-out error
I/O Host Bridge address/data parity error
I/O error on the ISA bus.

651-733

214

Description: Intermediate or System Bus


Address Parity Error.

651-734

214

Description: Intermediate or System Bus


Data Parity Error.

651-735

2D2

Description: Intermediate or System Bus


Time-out Error.

651-736

2D2

Description: Intermediate or System Bus


Time-out Error.

651-740

2D3

Description: Time-out on communication


response from Service Processor

651-741

2D3

Description: Service Processor error


accessing special registers

651-742

2D3

Description: Service Processor reports


unknown communication error

651-743

2D7

Description: Service Processor error


accessing Vital Product Data EEPROM

651-744

165

Description: Service Processor error


accessing Operator Panel

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

651-745

2D9

Description: Service Processor error


accessing Power Controller

651-746

2E0

Description: Service Processor error


accessing Fan Sensor

651-747

2E1

Description: Service Processor error


accessing Thermal Sensor

651-748

2E2

Description: Service Processor error


accessing Voltage Sensor

651-749

2E3

Description: Service Processor error


accessing Serial Port
2D4

651-750

814

Description: Service Processor error


accessing NVRAM
2D4

651-751

817

Description: Service Processor error


accessing Real-Time Clock/Time-of-Day Clock

651-752

2E4

Description: Service Processor error


accessing JTAG/COP controller/hardware

651-753

151
2D4

651-760

Description: Service Processor detects


loss of voltage from the Time-of-Day Clock
backup battery

software

Description: Service Processor caused a


reboot of the system due to a surveillance
time-out.
Action: A surveillance time-out is caused
by lack of response from the operating
system. The most likely cause is a software
or operating system failure. Verify that
the problem is not related to hardware by
running diagnostics, in Problem
Determination Mode, on all resources which
have not already been run. Also, the system
administrator should look for other
symptoms that would indicate a software or
operating system problem. Contact the
software support structure for assistance
in needed.

hardware

651-770

2C8

Description: Intermediate or System Bus


Address Parity Error. 292 306

651-771

2C8

Description: Intermediate or System Bus


Data Parity Error.
292
306

651-772

2D2

Description: Intermediate or System Bus


Time-out Error.
292
306

651-773

227

Description: Intermediate or System Bus

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

Data Parity Error.


651-780

E17
2C7

651-781

E18
2C7

651-782

300
214

651-783

301
214

651-784

302
214

651-785

303
214

651-786

304
214

651-787

305
214

Description: Uncorrectable Memory Error.


Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution". 214
Description: Uncorrectable Memory Error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".
214
Description: Uncorrectable Memory Error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".
Description: Uncorrectable Memory Error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".
Description: Uncorrectable Memory Error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".
Description: Uncorrectable Memory Error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".
Description: Uncorrectable Memory Error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".
Description: Uncorrectable Memory Error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

651-800

166

Description: Fan is turning slower than


expected
2E0

651-801

166

Description: Over voltage condition was


detected 2E0
Action: Verify the following:
* nothing is obstructing the fan rotation
* the fan power connection is tight
* the fan speed sensing cable is tight
If the fan still is not turning replace the
fan. If the fan is turning, replace the fan
sensor FRU.

651-810

152
2E2

Description: Over voltage condition was detected


Action: Verify that all DC voltages are
within specifications. If all of the
voltages are within specifications, replace
the voltage sensor FRU, otherwise replace
the power supply FRU.

651-811

152

Description: Under voltage condition was detected

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

2E2

651-812

651-813

152

651-814

Description: System shutdown due to:


1. Loss of AC power
2. Power button was pushed without proper
system shutdown
3. Power supply failure
Action: If reasons 1 and 2 can be ruled out
than replace the power supply FRU.
Description: System shutdown due to loss
of AC Power to the site.
Action: System resumed normal operation, no
action required.

152

651-815

Action: Verify that all DC voltages are


within specifications. If all of the
voltages are within specifications, replace
the voltage sensor FRU, otherwise replace
the power supply FRU.

287
289

Description: CEC Rack shutdown due to one


of the following:
1. Loss of AC power to the CEC Rack
2. Open or disconnected SPCN cable
between racks
3. AC module, Bulk power, regulator or
SPCN card failure.
Action: If 1 and 2 can be ruled out and the
problem can be recreated, try the power
supply related FRUs one at a time to
isolate the problem.
Description: I/O Rack shutdown due to one
of the following:
1. Loss of AC power to the I/O Rack
2. Open or disconnected SPCN cable
between racks
3. Power supply failure
Action: If 1 and 2 can be ruled out, then
replace the power supply FRU.

651-816

287

Description: Power fault due to internal


power supply failure.

651-817

289

Description: Power fault due to internal


power supply failure.

651-818

651-820

Description: Power fault due to manual


activation of power-off request.
Action: Resume normal operation.
2E1

Description: An over temperature condition


was detected
Action: Verify the following:
* the room ambient temperature is within
the system operating environment

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

* there is unrestricted air flow around


the system
* all system covers are closed
If all conditions are met, then replace the
temperature sensor FRU.
651-821

2E1

Description: System shutdown due to an


over maximum temperature condition being reached.
Action: Verify the following:
* The room ambient temperature is within
the system operating environment.
* There is unrestricted air flow around
the system.
* All system covers are closed.
If all conditions are met, then replace the
temperature sensor FRU.

651-822

166

Description: System shutdown due to over


temperature condition and fan failure. Use
the physical FRU location(s) as the
probable cause(s).
Action: Use the physical location codes to
replace the FRUs that are identified on the
diagnostics problem report screen.

2E1

651-830

651-831

166

Description: Sensor detected a fan failure.

2E0

Action: Use Chapter 13. "MAP 0220 Hot Plug


FRU Problem Resolution".

152

Description: Sensor detected a voltage


outside of the normal range.
Action: Use MAP 1520.

2E2
651-832

651-833

2E1

152
E19

651-839

Description: Sensor detected an abnormally


high internal temperature.
Action: Verify that:
1. The room ambient temperature is within
the system operating environment.
2. There is unrestricted air flow around
the system.
3. All system covers are closed.
4. There are no fan failures.
If none of these problems exist, then
proceed with Chapter 13. "MAP 0220 Hot Plug
FRU Problem Resolution".
Description: Sensor detected a power
supply failure.
Action: Use Chapter 13. "MAP 0220 Hot Plug
FRU Problem Resolution".
Description: Sensor detected a FRU that
has failed.
Action: Use the physical location code(s)

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

to replace the FRU(s) that are identified


on the diagnostics problem report screen.
651-840

166
2E0

Description: Sensor detected a fan failure.


Action: Use Chapter 13. "MAP 0220 Hot Plug
FRU Problem Resolution".

651-841

152

Description: Sensor detected a voltage


outside of the normal range.
Action: Use MAP 1520.

2E2
651-842

2E1

Description: Sensor detected an abnormally


high internal temperature.
Action: Verify that:
1. The room ambient temperature is within
the system operating environment.
2. There is unrestricted air flow around
the system.
3. All system covers are closed.
4. There are no fan failures.
If none of these problems exist, then
proceed with Chapter 13. "MAP 0220 Hot Plug
FRU Problem Resolution".

651-843

152

Description: Sensor detected a power


supply failure.
Action: Use Chapter 13. "MAP 0220 Hot Plug
FRU Problem Resolution".

E19
651-849

Description: Sensor detected a FRU that


has failed.
Action: Use the physical location code(s)
to replace the FRU(s) that are identified
on the diagnostics problem report screen.

651-88x

Description: The CEC or SPCN reported an error.


Action: If reference and location codes
were reported with this SRN, refer to this
system unit's system service guide with the
reference and location codes for the
necessary repair action. If the reference
and location codes were NOT reported, then
run Diagnostics in Problem Determination
mode and record and report the reference
and location codes for this SRN.

651-89x

Description: The CEC or SPCN reported an error.


Action: Refer to the this system unit's
system service guide, with the reference
and location codes, for the necessary
repair action. If the reference and
location codes were NOT reported, then run
Advanced Diagnostics in Problem
Determination mode and record and report
the reference and location codes for this SRN

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

652-600

Description: A non-critical error has been


detected and corrected: Uncorrectable
memory or unsupported memory.
Action: Schedule deferred maintenance.
Examine the memory modules and determine if
they are supported types. If the modules
are supported, then replace the appropriate
memory module(s).

652-610

210

Description: A non-critical error has been


detected and corrected: CPU internal error.
Action: Schedule deferred maintenance. Use
Chapter 12. "MAP 0210: General Problem
Resolution".

652-611

210

Description: A non-critical error has been


detected and corrected: CPU internal cache
Action: Schedule deferred maintenance. Use
Chapter 12. "MAP 0210: General Problem
Resolution"

652-612

D01

Description: A non-critical error has been


detected and corrected: L2 cache parity or
multi-bit ECC error.
Action: Schedule deferred maintenance. Use
Chapter 12. "MAP 0210: General Problem
Resolution".

652-613

D01

Description: A non-critical error has been


detected and corrected: L2 cache ECC
single-bit error.
Action: Schedule deferred maintenance. Use
Chapter 12. "MAP 0210: General Problem
Resolution"

652-622

2C5

Description: A non-critical error has been


detected and corrected: Correctable error
threshold exceeded.
Action: Schedule deferred maintenance. Use
Chapter 14. "MAP 0240: Memory Problem
Resolution".

652-623

2C6

Description: A non-critical error has been


detected and corrected: Correctable error
threshold exceeded.
Action: Schedule deferred maintenance. Use
Chapter 14. "MAP 0240: Memory Problem
Resolution".

652-630

307

Description: A non-critical error has been


detected and corrected: I/O Expansion Bus
Parity Error.
Action: Schedule deferred maintenance. Use

open in browser PRO version

error.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

Chapter 12. "MAP 0210: General Problem


Resolution".
652-631

307

Description: A non-critical error has been


detected and corrected: I/O Expansion Bus
Time-out Error.
Action: Schedule deferred maintenance. Use
Chapter 12. "MAP 0210: General Problem
Resolution".

652-632

306

Description: A non-critical error has been


detected and corrected: I/O Expansion Bus
Connection Failure.
Action: Schedule deferred maintenance. Use
Chapter 12. "MAP 0210: General Problem
Resolution".

307
308
652-633

307
306

Description: A non-critical error has been


detected and corrected: I/O Expansion Unit
not in an operating state.
Action: Schedule deferred maintenance. Use
Chapter 12. "MAP 0210: General Problem
Resolution".

652-634

307

Description: A non-critical error has been


detected and corrected: Internal Device Error.
Action: Schedule deferred maintenance. Use
Chapter 12. "MAP 0210: General Problem
Resolution".

652-660

E17

Description: A non-critical error has been


detected and corrected: Correctable error
threshold exceeded.
Action: Schedule deferred maintenance. Use
Chapter 14. "MAP 0240: Memory Problem
Resolution".

652-661

E18

Description: A non-critical error has been


detected and corrected: Correctable error
threshold exceeded.
Action: Schedule deferred maintenance. Use
Chapter 14. "MAP 0240: Memory Problem
Resolution".

652-662

300

Description: A non-critical error has been


detected and corrected: Correctable error
threshold exceeded.
Action: Schedule deferred maintenance. Use
Chapter 14. "MAP 0240: Memory Problem
Resolution".

652-663

301

Description: A non-critical error has been


detected and corrected: Correctable error
threshold exceeded.
Action: Schedule deferred maintenance. Use

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

Chapter 14. "MAP 0240: Memory Problem


Resolution".
652-664

302

Description: A non-critical error has been


detected and corrected: Correctable error
threshold exceeded.
Action: Schedule deferred maintenance. Use
Chapter 14. "MAP 0240: Memory Problem
Resolution".

652-665

303

Description: A non-critical error has been


detected and corrected: Correctable error
threshold exceeded.
Action: Schedule deferred maintenance. Use
Chapter 14. "MAP 0240: Memory Problem
Resolution".

652-666

304

Description: A non-critical error has been


detected and corrected: Correctable error
threshold exceeded.
Action: Schedule deferred maintenance. Use
Chapter 14. "MAP 0240: Memory Problem
Resolution".

652-667

305

Description: A non-critical error has been


detected and corrected: Correctable error
threshold exceeded.
Action: Schedule deferred maintenance. Use
Chapter 14. "MAP 0240: Memory Problem
Resolution".

652-731 G

2C8
292

652-732

2C8
292

652-733

214
2C8
292

652-734

214
2C8

Description: A non-critical error has been


detected and corrected: Intermediate or
System Bus Address Parity Error.
Action: Schedule deferred maintenance. Use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: A non-critical error has been
detected and corrected: Intermediate or
System Bus Data Parity Error.
Action: Schedule deferred maintenance. Use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: A non-critical error has been
detected and corrected: Intermediate or
System Bus Address Parity Error.
Action: Schedule deferred maintenance. Use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: A non-critical error has been
detected and corrected: Intermediate or
System Bus Data Parity Error.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

292
652-735

2D2
292

652-736

2D2
292
214

652-770

2C8
292
306

652-771

2C8
292
306

652-772

2D2
292
306

Action: Schedule deferred maintenance. Use


Chapter 12. "MAP 0210: General Problem
Resolution".
Description: A non-critical error has been
detected and corrected: Intermediate or
System Bus Time-out Error.
Action: Schedule deferred maintenance. Use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: A non-critical error has been
detected and corrected: Intermediate or
System Bus Time-out Error.
Action: Schedule deferred maintenance. Use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: A non-critical error has been
detected and corrected: Intermediate System
Bus Address Parity Error.
Action: Schedule deferred maintenance. Use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: A non-critical error has been
detected and corrected: Intermediate or
System Bus Data Parity Error.
Action: Schedule deferred maintenance. Use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: A non-critical error has been
detected and corrected: Intermediate or
System Bus Time-out Error.
Action: Schedule deferred maintenance. Use
Chapter 12. "MAP 0210: General Problem
Resolution".

652-773

227

Description: A non-critical error has been


detected and corrected. Intermediate or
System Bus Data Parity Error.
Action: Schedule deferred maintenance. Use
Chapter 12. "MAP 0210: General Problem
Resolution".

652-810

152

Description: Non-critical power problem,


loss of redundant supply. Use the physical
FRU location(s) as the probable cause(s).
Action: Schedule maintenance. Use the
physical location codes to replace the FRUs
that are identified on the diagnostics
problem report screen.

652-820

166

Description: Non-critical cooling problem,

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

652-820

166

Description: Non-critical cooling problem,


loss of redundant fan. Use the physical FRU
location(s) as the probable cause(s).
Action: Schedule maintenance. Use the
physical location codes to replace the FRUs
that are identified on the diagnostics
problem report screen.

652-830

166

Description: Sensor detected a redundant


fan failure.
Action: Use Chapter 13. "MAP 0220 Hot Plug
FRU Problem Resolution".

2E0
652-833

152
E19

Description: Sensor detected a redundant


power supply failure.
Action: Use Chapter 13. "MAP 0220 Hot Plug
FRU Problem Resolution".

652-839

Description: Sensor detected a redundant


FRU failure.
Action: Use the physical location code(s)
to replace the FRU(s) that are identified
on the diagnostics problem report screen.

652-88x

Description: The CEC or SPCN reported a


non-critical error.
Action: Schedule deferred maintenance. If
reference and location codes were reported
with this SRN, refer to this system unit's
system service guide with the reference and
location codes for the necessary repair
action. If the reference and location codes
were NOT reported, then run Diagnostics in
Problem Determination mode and record and
report the reference and location codes for
this SRN.

652-89x

Description: The CEC or SPCN reported a


non-critical error.
Action: Schedule deferred maintenance.
Refer to the this system unit's system
service guide, with the reference and
location codes, for the necessary repair
action. If the reference and location codes
were NOT reported, then run Advanced
Diagnostics in Problem Determination mode
and record and report the reference and
location codes for this SRN.

664-098

664

Description: IPLROS detected a problem


with the CD-ROM drive
B88

664-099

664

Description: IPLROS detected a problem


with the CD-ROM drive

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

664-111
664-112
664-113
664-121
664-122
664-123
664-125
664-126
664-127
664-128
664-129
664-150
664-151
664-152

D
D
D
D
D
D
D
D
D
D
D
D
D
D

664
664
664
664
664
664
664
664
664
664
664
Media
664
664

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
conflict was

Unable to reserve device.


Unable to do configuration.
Unable to open the device driver.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
A media error was detected.
A command timeout was detected.
A command reservation
detected.

664-162
664-171
664-172
664-173
664-175
664-198
664-199
664-211
664-281
664-301
664-302
669-201
669-202
669-203
669-204
669-205
669-206

D
D
D
D
D
D
D
D
D
G
G
D
D
D
D
D
D

664
664
664
664
664
664
664
664
664
664
664
669
669
669
669
669
669

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

The CD-ROM drive indicates an error.


Unable to reserve device.
Unable to do configuration.
Unable to open device driver.
The CD-ROM drive indicates an error.
Undefined error detected.
Undefined error detected.
The LED test failed.
No tone during audio test.
Errors found during ELA.
Errors found during ELA.
Configuration register test failure
I/O register test failure
Adapter memory test failure
Adapter initialization test failure
Internal loopback test failure
External loopback test failure

669-701

669

Description: Error log analysis indicates


that this device failed to initialize
because it is not the IBM version of the
adapter. AIX cannot configure the non-IBM
version of this adapter

669-702

669

Description: Error Log Analysis indicates


that this device failed to initialize due
to a problem with the EEPROM on the adapter.

221
669-703

669
221

669-704

669
221

674-101

674

Description: Error Log Analysis indicates


that this device has failed to initialize
due to a self-test failure.
Description: Error Log Analysis indicates
that this device has failed to initialize
due to firmware download error. The
microcode seems to be properly installed.
Description: Artic960 PCI Adapter Central
Processing Unit (CPU) test failure.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

C94

Processing Unit (CPU) test failure.


Action: Use MAP 0210.

674-102
674-103

D
D

674
674

Description: Artic960 PCI Adapter Timer test failure.


Description: Artic960 PCI Adapter Bus Interface test failure.

674-104

C94

Description: Artic960 PCI Adapter Dynamic


Random Access Memory (DRAM) test failure.

674-105

674

Description: Artic960 PCI Adapter Memory


Protection test failure.

674-106

674

Description: Artic960 PCI Adapter Debug


Port test failure.

674-107

C95

Description: Interface board wrap test failure.

674-110

C94

Description: Artic960 PCI Adapter Download


Diagnostics test failure.

674-123

C95

Description: Interface board non-wrap test failure.

674-150

674

Description: Device configuration failure.


software
Action: Use MAP 0210.

674-151

674

Description: Device driver indicates a


hardware failure. software
227

674-152

674

Description: Failure and error in


determining which type of Artic960 PCI
Adapter.
Action: Use MAP 0210.

674-153

674

Description: Error log analysis indicates


a Artic960 PCI Adapter failure.
Action: Use ERRPT command to check error
log.
C94 software

227
674-154

C94

Description: Artic960 PCI Adapter


initialization failure.

674-155

674

Description: Artic960 PCI Adapter


initialization failure.

674-156

C95

Description: Artic960 PCI Adapter


initialization failure.

674-157

C98

Description: Cable wrap test failure.

675-101

675

Description: Artic960Hx Adapter Central


Processing Unit (CPU) test failure.

675-102

675

Description: Artic960Hx Adapter Timer test failure.

675-103

675

Description: Artic960Hx Adapter Bus


Interface test failure.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

675-104

C94

Description: Artic960Hx Adapter Dynamic


Random Access Memory (DRAM) test failure.

675-105

675

Description: Artic960Hx Adapter Memory


Protection test failure.

675-106

675

Description: Artic960Hx Adapter Debug Port test failure.

675-107

C95

Description: Interface board wrap test failure.

675-110

C94

Description: Artic960Hx Adapter Download


Diagnostics test failure.

675-123

C95

Description: Interface board non-wrap test failure.

675-150

675

Description: Device configuration failure.


software
Action: Use MAP 0210.
227

675-151

675

Description: Device driver indicates a


software
Action: Use MAP 0210. 227

675-152

675

Description: Failure and error in


determining which type of Artic960Hx
Adapter.
Action: Use MAP 0210.

675-153

675

Description: Error log analysis indicates


a Artic960Hx Adapter failure.
Action: Use ERRPT command to check error log.

227

hardware failure.

675-154

C94

Description: Artic960Hx Adapter


initialization failure.

675-155

675

Description: Artic960Hx Adapter


initialization failure.

675-156

C95

Description: Artic960Hx Adapter


initialization failure.

675-157
677-201
677-202
677-203
677-204
677-205
677-206
677-207
677-208
677-209
677-301

D
D
D
D
D
D
D
D
D
D
D

C98
677
677
677
677
677
677
677
677
677
677

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

677-401

C24
xxx

Description: Unisolated Loop Back test failure


Action: Run diagnostics again utilizing the
wrap plug.
677
221

open in browser PRO version

C94software

Cable wrap test failure.


Configuration Register test failure
Reset test failure
Register test failure
SRAM test failure
Interrupt test failure
PCI Loop Back test failure
Internal Loop Back test failure 221
External Loop Back test failure 221
Hub Loop Back test failure xxx
I/O Error on Read/Write Operation 221 Software

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

677-701

677

677-702

678-098
678-099

J
J

678
678

Description: Tape drive indicates an


Description: Tape drive not found.

678-101

678

Description: Timeout while attempting to


communicate with SCSI device.

678-102
678-103

D
D

678
678

Description: The SCSI device indicates busy.


Description: The SCSI device indicates a
reservation conflict.

678-104

678

Description: The SCSI device indicates a


check condition.

678-105

678

Description: An error is detected in


request sense data.

678-107

678

Description: Sense data from the SCSI


drive has unexpected data.

678-110

678

Description: The Reserve command failed.

678-111

678

Description: Invalid condition from the


drive after a reserve.

678-112

678

Description: The write protect sensor test failed.

678-113

678

Description: Invalid condition from drive


after a request sense.

678-114

678

Description: Timeout while attempting to


communicate with the SCSI device.

678-120
678-130
678-134
678-135
678-140
678-150
678-160
678-161

D
D
D
D
D
D
D
D

678
678
B88
678
678
678
678
678

Description: The Inquiry command failed.


Description: The Load command failed.media
Description: The adapter failed to configure. software
Description: The Unload command failed. media
Description: The Mode Select command failed.
Description: The Test Unit Ready command failed. media
Description: The Send Diagnostic command failed.
media
Description: Invalid condition from the
drive after a reserve.
B88

678-163

678

Description: Invalid condition from the


drive after a request sense. B88

678-164

678

Description: Timeout while attempting to


communicate with the SCSI device. B88

Microcode

Description: Error log analysis indicates


that an error has occurred with the 221 adapter.
Description: Error log analysis indicates
that an adapter microcode error has 677 occurred

open in browser PRO version

error.
B88

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

678-165
678-166
678-167
678-168
678-169
678-170
678-180
678-185
678-190
678-200
678-201
678-210
678-211
678-220
678-230
678-240
678-260
678-261
678-300
678-310
678-320

D
D
D
D
D
D
D
D
D
D
G
D
D
D
D
D
D
D
D
D
G

678
678
678
B88
678
678
678
678
678
678
678
678
678
678
678
678
678
678
678
B88
678

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

Write, Read and Compare Test failed. B88


Unable to configure the device. B88 software
An unexpected SCSI error occurred. B88
The adapter failed to configure. software
The send diagnostic command failed. media
The Read, Write and Compare test failed.B88 media
The Load command failed. media
The Unload command failed. media
The Mode Select command failed.
The Test Unit Ready command failed. media
Error diagnosed from error log analysis.
B88
The device configuration failed. B88
The device open failed.
The Release command failed.
The Request Sense command failed.
The Openx command failed.
The device configuration failed.
The device open failed.
The device configuration failed. software
SCSI adapter configuration failed. software
Error log analysis indicates a failure. media

678-411
to
678-423

D
D

678
678
B88

Description: A reservation conflict


occurred.
software

678-511
to
678-523

D
D

678
678
B88

Description: The drive returned bad or


non-extended sense data.

678-611
to
678-623

D
D

678
678
B88

Description: An adapter or bus I/O error


occurred.
software

678-711
to
678-723

D
D

678
678
B88

Description: A device timeout error


occurred.
software

679-098
679-099
679-102
679-104
679-105
679-106
679-108
679-110
679-112
679-114

J
J
D
D
D
D
D
D
D
D

679
679
679
679
679
679
679
679
679
679

679-116

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

The disk drive indicates an error.


The disk drive not found.
An unrecoverable media error occurred.
The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

problem, call your support person.


679-117
679-118
679-120
679-122
679-124
679-126

D
D
D
D
D
D

679
679
679
679
679
679

Description:
Description:
Description:
Description:
Description:
Description:

679-128

679

Description: The error log analysis


indicates a hardware failure.

679-129

D50

Description: Error log analysis indicates


a SCSI bus problem. B88 software

679-130

679

Description: Error log analysis indicates


a problem reported by the disk drive's self
monitoring function.

679-132
679-134
679-135
679-136

D
D
D
D

679
B88
679
679

Description:
Description:
Description:
Description:

679-137

679

Description: Unit attention condition has


occurred on the Send Diagnostic command.

681
681
681
681
681
681
681
681
681
681

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

A
A
A
A
A
A

write protect error occurred.


SCSI command time-out occurred. B88
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error occurred.
software error was caused a hardware failure.

A disk drive hardware error occurred.


The adapter failed to configure. software
The device failed to configure. software
The certify operation failed to save

681-098
681-099
681-102
681-104
681-105
681-106
681-108
681-110
681-112
681-114

J
J
D
D
D
D
D
D
D
D

The disk drive indicates an error.


The disk drive not found. B88
An unrecoverable media error occurred.
The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

681-116

681-117
681-118
681-120
681-122
681-124

D
D
D
D
D

681
681
681
681
681

Description:
Description:
Description:
Description:
Description:

681-126

681

Description: A software error was caused


by a hardware failure.
B88

681-128

681

Description: The error log analysis

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

A
A
A
A
A

write protect error occurred.


SCSI command time-out occurred. B88
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error occurred.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

indicates a hardware failure.


681-129

D50

Description: Error log analysis indicates


a SCSI bus problem. software

681-130

681

Description: Error log analysis indicates


a problem reported by the disk drive's self
monitoring function.

681-132
681-134
681-135
681-136

D
D
D
D

681
B88
681
681

Description:
Description:
Description:
Description:

681-137

681

Description: Unit attention condition has


occurred on the Send Diagnostic command.

682-098

682

Description: IPLROS detected a problem


with the CD-ROM drive B88
221

682-099

682

Description: IPLROS detected a problem


with the CD-ROM drive
B88

682-111
682-112
682-113
682-121
682-122
682-123
682-125
682-126
682-127
682-128
682-129
682-150
682-151
682-152
682-162
682-171
682-172
682-173
682-175
682-198
682-199
682-211
682-281
682-301
682-302
685-001
685-040
685-041
685-060
685-081
685-082
685-0B0

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
G
G
D
D
D
D
D
D
D

682
682
682
682
682
682
682
682
682
682
682
Media
682
682
682
682
682
682
682
682
682
682
682
682
682
685
685
685
software
software
software
software

open in browser PRO version

A disk drive hardware error occurred.


The adapter failed to configure.software
The device failed to configure. software
The certify operation failed.

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

Unable to reserve device. B88


Unable to do configuration. B88
Unable to open the device driver.
B88
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
B88
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
A media error was detected. 682
A command timeout was detected. D88
A command reservation conflict was detected.
The CD-ROM drive indicates an error.
Unable to reserve device.
Unable to do configuration.
Unable to open device driver.
The CD-ROM drive indicates an error.
Undefined error detected. B88
Undefined error detected.
The LED test failed.
No tone during audio test.
Errors found during ELA.
Errors found during ELA.
B88
RGB_SCREEN_USER_FAIL Monitor/cable
STATUS_POLL_TIMEOUT_ERROR monitor/cable
CRC_POLL_TIMEOUT_ERROR Monitor/cable
SVC_AIDS_INPUT_ERROR 685
LOOP_COUNT_WAS_ZERO 685
INVALID_TU_NUMBER 685
ROM test failed 685

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

685-0B0
685-0B1
685-0D0
685-0D1
685-0D2
685-0D3
685-0D5
685-0D6
685-0D8
685-0D9
685-0DB
685-0E5
685-0E6
685-0E7
685-0E8
685-0E9
685-0EA
685-0EB
685-0EC
685-0ED
685-0EE
685-100
685-101
685-102
685-103
685-104
685-105
685-106
685-107
685-108
685-109
685-10A
685-10B
685-200
685-201
685-202
685-203
685-204
685-205
685-206
685-207
685-208
685-209
685-20B
685-400
685-401
685-402
685-403
685-404
685-500
685-501
685-502
685-503
685-504
685-600

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

software
software
software
software
software
software
software
software
software
software
software
software
software
software
software
software
software
software
software
software
software
685
685
685
685
685
685
685
685
685
685
685
685
685
685
685
685
685
685
685
685
685
685
685
685
685
685
685
685
685
685
685
685
software
685

open in browser PRO version

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

ROM test failed 685


ROM test failed 685
INTERNAL_ERROR_DATA_SIZE_0 685
INTERNAL_ERROR_DATA_SIZE_1 685
INTERNAL_ERROR_DATA_SIZE_2 685
INTERNAL_ERROR_DATA_SIZE_3 685
ODM INIT FAILED 685
ODM_OBJECT_SEARCH_FAILED 685
ODM_GET_OBJECT_FAILED
685
ODM_TERM_FAILED 685
ILLEGAL_RESOLUTION_SPECIFIED
AIXGSC_MGA_START_INTERRUPT_FAILED
AIXGSC_MGA_STOP_INTERRUPT_FAILED
MDD_OPEN_BUS_FAILED
MDD_IOCTL_ERROR 685
OPEN_RCM_ERROR 685
IOCTL_GSC_HANDLE_FAILED 685
AIXGSC_MAKE_GP_FAILED 685
AIXGSC_UNMAKE_GP_FAILED 685
DEVICE_BUSY_ERROR 685
AIXGSC_MGA_SET_DISPLAY_FAILED 685
REG_32_BIT_PRTN_ERROR Monitor/cable
REG_32_BIT_ADDR_UNIQ_ERROR Monitor/cable
REG_8_BIT_PTRN_ERROR Monitor/cable
REG_8_BIT_ADDR_UNIQ_ERROR Monitor/cable
CRTC_REGS_PTRN_ERROR Monitor/cable
CRTC_REGS_ADDR_UNIQ_ERROR Monitor/cable
CRTCEXT_REGS_PTRN_ERROR Monitor/cable
CRTCEXT_REGS_ADDR_UNIQ_ERROR Monitor/cable
RAMDAC_REGS_PTRN_ERROR Monitor/cable
RAMDAC_REGS_ADDR_UNIQ_ERROR Monitor/cable
PALETTE_REGS_PTRN_ERROR Monitor/cable
PALETTE_REGS_ADDR_UNIQ_ERROR Monitor/cable
ROM test failed
227
ROM test failed
227
ROM test failed
227
ROM test failed
227
ROM test failed 227
ROM test failed
227
ROM test failed 227
ROM test failed
227
ROM test failed
227
ROM test failed
227
ROM test failed 227
SGRAM_RED_SCREEN_ERROR Monitor/cable
SGRAM_GREEN_SCREEN_ERROR Monitor/cable
SGRAM_BLUE_SCREEN_ERROR Monitor/cable
SGRAM_WHITE_SCREEN_ERROR Monitor/cable
SGRAM_INCREMENTING_SCREEN_ERROR Monitor/cable
BLIT_TEST_ERROR_640 x 480 Monitor/cable
BLIT_TEST_ERROR_800 x 600 Monitor/cable
BLIT_TEST_ERROR_1024 x 768 Monitor/cable
BLIT_TEST_ERROR_1280 x 1024 Monitor/cable
INTERNAL_ERROR_DATA_SIZE_4 685
DRAW_TEST_ERROR_640 x 480_A Monitor/cable

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

685-601
685-602
685-603
685-604
685-605
685-606
685-607
685-608
685-609
685-60A
685-60B
685-60C
685-60D
685-60E
686-114
686-124

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

685
685
685
software
685
685
685
685
software
685
685
685
685
software
686
686

686-152

686

Description: The data


Note: The cable could
cable FRU part number
the adapter under FFC

686-153
686-252
686-253
686-501
686-511
686-512
686-513

D
D
D
D
D
D
D

686
686
686
686
686
686
686

Description:
Description:
Description:
Description:
Description:
Description:
Description:

686-514

686

Description: Adapter to host memory test


failed (word pattern test)

686-521
686-522
686-523
686-524
686-526
686-527
686-528
686-529
686-531
686-533
686-534
686-541

D
D
D
D
D
D
D
D
D
D
D
D

686
686
686
686
686
686
686
686
686
686
686
686

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

686-542

686

Description: Port async internal loopback


test failed (no response from the port)

686-551

686

Description: Port async external loopback


test failed (general)

686-552

686

Description: Port async external loopback


test failed (data signals)

open in browser PRO version

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

DRAW_TEST_ERROR_800 x 600_A Monitor/cable


DRAW_TEST_ERROR_1024 x 768_A Monitor/cable
DRAW_TEST_ERROR_1280 x 1024_A Monitor/cable
INTERNAL_ERROR_DATA_SIZE_5 685
DRAW_TEST_ERROR_640 x 480_B Monitor/ cable
DRAW_TEST_ERROR_800 x 600_B Monitor/cable
DRAW_TEST_ERROR_1024 x 768_B Monitor/cable
DRAW_TEST_ERROR_1280 x 1024_B Monitor/cable
INTERNAL_ERROR_DATA_SIZE_6 685
DRAW_TEST_ERROR_640 x 480_C Monitor/cable
DRAW_TEST_ERROR_800 x 600_C Monitor/cable
DRAW_TEST_ERROR_1024 x 768_C Monitor/cable
DRAW_TEST_ERROR_1280 x 1024_C Monitor/cable
INTERNAL_ERROR_DATA_SIZE_7 685
The register verification test failed.
The adapter RAM verification test failed.
wrap communication test failed.
be defective. The
is listed along with
686.

The modem control line test


The data wrap communication
The modem control line test
Adapter Reset failed
Adapter to host memory test
Adapter to host memory test
Adapter to host memory test

failed.
test failed.
failed.
failed(byte tag)
failed (word tag)
failed (byte pattern)

Adapter BIOS POST CPU failed


Adapter BIOS POST Checksum failed
Adapter BIOS POST Timer failed
Adapter BIOS POST RAM failed
Adapter BIOS POST Async Ports failed
Adapter BIOS Misc. failed
Adapter BIOS Reset failed
Adapter BIOS Download failed
Adapter BIOS Command failed
Adapter BIOS Timer test failed
Adapter BIOS RAM test failed
Port async internal loopback test failed (general)

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

686-553

686

Description: Port async external loopback


test failed (control signals)

686-554

686

Description: Port async external loopback


test failed (modem signals)

686-555

686

Description: Port async external loopback


test failed (no response from port)

686-901

software

to
686-920

686-921

686-922

to

686
software
686

686-924

686-925

686-926

to

686
software
686

686-950

687-114
687-124
687-152
687-153

D
D
D
D

687
687
687
687

open in browser PRO version

Description: An unexpected error occurred


that can be attributed to software or hardware
Action: Run diagnostics from a source other
than from the disk or a network. If the
same error occurs or if the original SRN
was not obtained from disk or a network
based diagnostics, use Chapter 12. "MAP
0210: General Problem Resolution" with a
FFC of 686; otherwise, suspect a software
problem.

686

Description: The adapter failed to


configure.
software
Description: An unexpected error occurred
that can be attributed to software or
hardware.
Action: Run diagnostics from a source other
than from the disk or a network. If the
same error occurs or if the original SRN
was not obtained from disk or a network
based diagnostics, use Chapter 12. "MAP
0210: General Problem Resolution" with a
FFC of 686; otherwise, suspect a software
problem.
Description: The adapter failed to
configure. software
Description: An unexpected error occurred
that can be attributed to software or
hardware.
Action: Run diagnostics from a source other
than from the disk or a network. If the
same error occurs or if the original SRN
was not obtained from disk or a network
based diagnostics, use Chapter 12. "MAP
0210: General Problem Resolution" with a
FFC of 686; otherwise, suspect a software
problem.
Description:
Description:
Description:
Description:

The
The
The
The

register verification test failed.


adapter RAM verification test failed.
data wrap communication test failed.
modem control line test failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

687-252
687-253
687-144
687-244
687-501
687-502
687-511
687-512

D
D
D
D
D
D
D
D

687
687
687
687
687
687
687
687

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
failed (word

687-513

687

Description: Adapter to host memory test


failed (byte pattern test)

687-514

687

Description: Adapter to host memory test


failed (word pattern test)

687-521
687-522
687-523
687-524
687-525
687-527
687-528
687-529
687-531
687-533
687-534
687-541
687-551
687-600
687-700

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

687
687
687
687
687
687
687
687
687
687
687
687
687
837
684

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

687-901

to

software
687

687-920

The data wrap communication test failed.


The modem control line test failed.
The sync line test failed.
The sync line test failed.
Adapter Reset failed
Adapter Fuse failed
Adapter to host memory test failed (byte tag)
Adapter to host memory test
tag test)

Adapter BIOS POST CPU failed


Adapter BIOS POST Checksum failed
Adapter BIOS POST Timer failed
Adapter BIOS POST RAM failed
Adapter BIOS POST Sync Line failed
Adapter BIOS Misc. failed
Adapter BIOS Reset failed
Adapter BIOS Download failed
Adapter BIOS Command failed
Adapter BIOS Timer test failed
Adapter BIOS RAM test failed
Port sync internal loopback test failed
Port sync external loopback test failed
232RAN status test failed
422RAN status test failed

Description: An unexpected error occurred


that can be attributed to software or
hardware.
Action: Run diagnostics from a source other
than from the disk or a network. If the
same error occurs or if the original SRN
was not obtained from disk or a network
based diagnostics, use Chapter 12. "MAP
0210: General Problem Resolution" with a
FFC of 687; otherwise, suspect a software problem.

687-921

software

Description: The adapter failed to configure. 687

687-922
to
687-924

software

Description: An unexpected error occurred


that can be attributed to software or
hardware.
Action: Run diagnostics from a source other
than from the disk or a network. If the
same error occurs or if the original SRN
was not obtained from disk or a network
based diagnostics, use Chapter 12. "MAP
0210: General Problem Resolution" with a
FFC of 687; otherwise, suspect a software problem.

687

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

FFC of 687; otherwise, suspect a software problem.


687-925

687-926

687

Description: The adapter failed to configure. software

software

to

Description: An unexpected error occurred


that can be attributed to software or
hardware.
Action: Run diagnostics from a source other
than from the disk or a network. If the
same error occurs or if the original SRN
was not obtained from disk or a network
based diagnostics, use Chapter 12. "MAP
0210: General Problem Resolution" with a
FFC of 687; otherwise, suspect a software
problem.

687

687-950

689-098
689-099
689-102
689-104
689-105
689-106
689-108
689-110
689-112
689-114

j
J
D
D
D
D
D
D
D
D

689-116

689
689
689
689
689
689
689
689
689
689

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

The disk drive indicates an error. B88


The disk drive not found. B88
An unrecoverable media error occurred.
The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

689-117
689-118
689-120
689-122
689-124
689-126
689-128

D
D
D
D
D
D
G

689
689
689
689
689
689
689

Description: A write protect error occurred.


Description: A SCSI command time-out occurred.B88
Description: A SCSI busy or command error.
Description: A SCSI reservation conflict error.
Description: A SCSI check condition error occurred.
Description: A software error was caused by a hardware failure.
Description: The error log analysis
indicates a hardware failure.

689-129

D50

Description: Error log analysis indicates


a SCSI bus problem. 689
B88 software

689-130

689

Description: Error log analysis indicates


a problem reported by the disk drive's self
monitoring function.

689-132
689-134
689-135
689-136

D
D
D
D

689
B88
689
689

Description:
Description:
Description:
Description:

open in browser PRO version

A disk drive hardware error occurred.


The adapter failed to configure.software
The device failed to configure. software
The certify operation failed save

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

689-137

689
689
690
690
690
690
690
690
690
690
690

Description: Unit attention condition has


occurred on the Send Diagnostic command. B88

690-098
690-099
690-102
690-104
690-105
690-106
690-108
690-110
690-112
690-114

J
J
D
D
D
D
D
D
D
D

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

690-116

690-117
690-118
690-120
690-122
690-124

D
D
D
D
D

690
690
690
690
690

Description:
Description:
Description:
Description:
Description:

690-126

690

Description: A software error was caused


by a hardware failure. B88

690-128

690

Description: The error log analysis


indicates a hardware failure.

690-129

D50

Description: Error log analysis indicates


a SCSI bus problem.690 B88 software

690-130

690

Description: Error log analysis indicates


a problem reported by the disk drive's self
monitoring function.

690-132
690-134
690-135
690-136

D
D
D
D

690
B88
690
690

Description:
Description:
Description:
Description:

690-137

690

Description: Unit attention condition has


occurred on the Send Diagnostic command.

691-200

691

Description: The ATM 25Mbps Adapter open


test failed.

691-202

691

Description: The ATM 25Mbps Adapter


register test failed.

691-203

691

Description: The ATM 25Mbps Adapter memory

D50

The disk drive indicates an error. B88


The disk drive not found. B88
An unrecoverable media error occurred.
The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

A
A
A
A
A

write protect error occurred.


SCSI command time-out occurred. B88
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error occurred.

A disk drive hardware error occurred.


The adapter failed to configure.software
The device failed to configure. software
The certify operation failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

691-203

691

Description: The ATM 25Mbps Adapter memory


test failed.

691-204

691

Description: The ATM 25Mbps Adapter NVRAM


test failed.

691-205

691

Description: The ATM 25Mbps Adapter


interrupt test failed.

691-206

691

Description: The ATM 25Mbps Adapter wrap


test failed.

691-210

691

Description: The ATM 25Mbps Adapter close


test failed.

691-220

691

Description: The ATM 25Mbps Adapter was


not found.
Action: Re-install the ATM 25Mbps Adapter
and re-run the test. If the error
continues, use Chapter 12. "MAP 0210:
General Problem Resolution".

227

691-300

Wrap Plug
691
227

Description: The ATM 25Mbps Adapter wrap


test failed.
Action: Re-install the wrap plug and re-run
the test. If the error continues, use
Chapter 12. "MAP 0210: General Problem
Resolution".

691-700
692-110
692-120
692-130
692-135
692-140
692-150
692-160
692-169
692-170
692-180
692-185
692-190
692-200
692-210
692-220
692-230
692-240
692-300
692-310
692-320
692-411
692-423

G
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
G
D

691
692
692
692
692
692
692
692
692
692
692
692
692
692
692
692
692
692
692
B88
692
692
B88

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
software

692-511
to

692

Description: The drive returned bad or


non-extended sense data.

open in browser PRO version

Error log analysis reported a hardware error.


The Reserve command failed.
The Inquiry command failed.
The Load command failed. media
The Unload command failed.media
The Mode Select command failed.
The Test Unit Ready command failed. media
The Send Diagnostic command failed.media
The send diagnostic command failed.media
The Read, Write and Compare test failed.media
The Load command failed. media
The Unload command failed. media
The Mode Select command failed.
The Test Unit Ready command failed.media
The device configuration failed. B88
The Release command failed.
The Request Sense command failed.
The Openx command failed.
The device configuration failed.software
SCSI adapter configuration failed.software
Error log analysis indicates a failure. media
A reservation conflict to occurred.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

692-523

B88

692-611
to
692-623

692

692-711
to
692-723

693-100
693-101
693-102
693-103
693-104
693-105
693-106
697-100
697-101

D
D
D
D
D
D
D
D
D

693
693
693
693
693
693
693
697
697

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

697-102

697

Description: PCI configuration register


write failure software
227

697-103
697-104
697-105
697-106
697-107
697-108

D
D
D
D
D
D

697
697
697
697
697
697

Description:
Description:
Description:
Description:
Description:
Description:

697-109

Wrap Plug
697

Description: Loss of light detected in Link test


Action: Check wrap plug installation.

697-10B

Wrap Plug

Description: External Loopback failed


Action: Check wrap plug installation.

697-10C
697-10D
697-1FF
697-200
697-201
697-202
697-203
697-205
697-206
698-100
698-101
698-102
698-103
698-104
698-105
698-106
698-107
698-108

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

697
697
697
software
software
software
software
software
software
698
698
698
698
698
698
698
698
698

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

B88
692
B88

open in browser PRO version

Description: An adapter or bus I/O error


occurred.
software
Description: A device timeout error
occurred.
software
Adapter open failed.
227
Adapter config register test failed.
Adapter reset failed. 227
Adapter I/O register test failed.
Adapter microcode download test failed.
Adapter internal wrap test failed.227
Adapter close failed.
227
Charm memory write failure software
Charm memory read failure software

Charm software reset failure software


Packet memory error software
Control memory failure software 227
Link-R detected bad parity
Suni detected bad parity
Suni initialization failure

Internal Loopback failed software 227


DMS failed software
EPROM checksum failed software 227
Klog error 697 227
ASL error 697
227
ODM Initialization error 697 227
Diagnostic configuration failure 697 227
Error in diag open 697
227
Error in releasing adapter 697 227
Charm memory write failure software227
Charm memory read failure software
PCI configuration register write failure software
Charm software reset failure software
Packet memory error software 227
Control memory failure software 227
Link-R detected bad parity
Suni detected bad parity
Suni initialization failure

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

698-109

Wrap Plug
698

Description: Loss of light detected inLink test


Action: Check wrap plug installation.

698-10B

Wrap Plug

Description: External Loopback failed


Action: Check wrap plug installation. 698

698-10C
698-10D
698-1FF
698-200
698-201
698-202
698-203
698-205
698-206
699-100

D
D
D
D
D
D
D
D
D
D

698
698
698
software
software
software
software
software
software
699

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

699-110

699

Description: Error Log analysis indicates


a hardware error.

699-120

699

Description: Adapter hardware has caused a


software failure.

700-102
to
700-114

700

Description: 1.1GB single-ended disk drive


problem.

700-116

700-117
700-118

D
D

700
700

Description: A write protect error occurred.


Description: A SCSI command time-out.
B88

700-120
to
700-124

700

Description: A SCSI error.

700-126

700

Description: A software error was caused by a hardware failure.

700-128

700

Description: The error log analysis


indicates a hardware failure.

700-129

D50

Description: Error log analysis indicates


a SCSI bus problem. 700 B88 software

700-130

700

Description: Error log analysis indicates


a problem reported by the disk drive's self
monitoring function.

700-132

700

Description: A disk drive hardware error occurred.

Internal Loopback failed software


227
DMS failed 227
software
EPROM checksum failed software 227
Klog error 698
227
ASL error 698
227
ODM Initialization error 698 227
Diagnostic configuration failure 698 227
Error in diag open 698
227
Error in releasing adapter
An error was found on the adapter

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

700-134
700-135
700-136

D
D
D

B88
700
700

Description: The adapter failed to configure. software


Description: The device failed to configure.software
Description: The certify operation failed.

700-137

700

Description: Unit attention condition has


occurred on the Send Diagnostic command.

701-102
to
701-114

701

Description: 1.1GB 16-bit single-ended


disk drive problem.

701-116

701-117
701-118

D
D

701
701

Description: A write protect error occurred.


Description: A SCSI command time-out.

701-120
to
701-124

701

Description: A SCSI error.

701-126

701

Description: A software error was caused


by a hardware failure.

701-128

701

Description: The error log analysis


indicates a hardware failure.

701-129

D50

Description: Error log analysis indicates


a SCSI bus problem. 701 B88 software

701-130

701

Description: Error log analysis indicates


a problem reported by the disk drive's self
monitoring function.

701-132
701-134
701-135
701-136

D
D
D
D

701
B88
701
701

Description:
Description:
Description:
Description:

701-137

701

Description: Unit attention condition has


occurred on the Send Diagnostic command.

702-102
to
702-114

702

Description: 1.1GB 16-bit differential


disk drive problem.

702-116

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

A disk drive hardware error occurred.


The adapter failed to configure. software
The device failed to configure.software
The certify operation failed.

pdfcrowd.com

all compatible. If you do not find a


problem, call your support person.
702-117
702-118

D
D

702
702

Description: A write protect error occurred.


Description: A SCSI command time-out.

702-120
to
702-124

702

Description: A SCSI error.

702-126

702

Description: A software error was caused


by a hardware failure.

702-128

702

Description: The error log analysis


indicates a hardware failure.

702-129

D50

Description: Error log analysis indicates


a SCSI bus problem. software

702-130

702

Description: Error log analysis indicates


a problem reported by the disk drive's self
monitoring function.

702-132

702

Description: A disk drive hardware error occurred.

702-134
702-135
702-136

D
D
D

B88
702
702

Description: The adapter failed to configure.software


Description: The device failed to configure. software
Description: The certify operation failed.

702-137

702

Description: Unit attention condition has


occurred on the Send Diagnostic command.

703-102
to
703-114

703

Description: 2.2GB single-ended disk drive


problem.

703-116

703-117

703

Description: A write protect error occurred.

703-118

703

Description: A SCSI command time-out.

703-120
to
703-124

703

Description: A SCSI error.

703-126

703

Description: A software error was caused


by a hardware failure.

703-128

703

Description: The error log analysis

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

indicates a hardware failure.


703-129

D50

Description: Error log analysis indicates


a SCSI bus problem. 703 B88 software

703-130

703

Description: Error log analysis indicates


a problem reported by the disk drive's self
monitoring function.

703-132
703-134
703-135
703-136

D
D
D
D

703
B88
703
703

Description:
Description:
Description:
Description:

703-137

703

Description: Unit attention condition has


occurred on the Send Diagnostic command.

704-102
to
704-114

704

Description: 2.2GB 16-bit single-ended


disk drive problem.

704-116

704-117

704

Description: A write protect error occurred.

704-118

704

Description: A SCSI command time-out.

704-120
to
704-124

704

Description: A SCSI error.

704-126

704

Description: A software error was caused


by a hardware failure.

704-128

704

Description: The error log analysis


indicates a hardware failure.

704-129

D50

Description: Error log analysis indicates


a SCSI bus problem. 704 B88 software

704-130

704

Description: Error log analysis indicates


a problem reported by the disk drive's self
monitoring function.

704-132
704-134
704-135
704-136

D
D
D
D

704
B88
704
704

Description:
Description:
Description:
Description:

704-137

704

Description: Unit attention condition has

A disk drive hardware error occurred.


The adapter failed to configure.Software
The device failed to configure. software
The certify operation failed.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

A disk drive hardware error occurred.


The adapter failed to configure. software
The device failed to configure. B88 software
The certify operation failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

704-137

704

Description: Unit attention condition has


occurred on the Send Diagnostic command.

705-102
to
705-114

705

Description: 2.2GB 16-bit differential


disk drive problem.

705-116

705-117
705-118

D
D

705
705

Description: A write protect error occurred.


Description: A SCSI command time-out.

705-120
to
705-124

705

Description: A SCSI error.

705-126

705

Description: A software error was caused


by a hardware failure.

705-128

705

Description: The error log analysis


indicates a hardware failure.

705-129

D50

Description: Error log analysis indicates


a SCSI bus problem.

705-130

705

Description: Error log analysis indicates


a problem reported by the disk drive's self
monitoring function.

705-132
705-134
705-135
705-136

D
D
D
D

705
B88
705
705

Description:
Description:
Description:
Description:

705-137

705

Description: Unit attention condition has


occurred on the Send Diagnostic command.

706-102
to
706-114

706

Description: 4.5GB 16-bit single-ended


disk drive problem

706-116

706-117
706-118

D
D

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

A disk drive hardware error occurred.


The adapter failed to configure. software
The device failed to configure.B88 software
The certify operation failed.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.
706
706

open in browser PRO version

Description: A write protect error occurred.


Description: A SCSI command time-out.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

706-120
to
706-124

706

Description: A SCSI error.

706-126

706

Description: A software error was caused


by a hardware failure.

706-128

706

Description: The error log analysis


indicates a hardware failure.

706-129

D50

Description: Error log analysis indicates


a SCSI bus problem. 706 B88 software

706-130

706

Description: Error log analysis indicates


a problem reported by the disk drive's self
monitoring function.

706-132
706-134
706-135
706-136

D
D
D
D

706
B88
706
706

Description:
Description:
Description:
Description:

706-137

706

Description: Unit attention condition has


occurred on the Send Diagnostic command.

707-102
to
707-114

707

Description: Any of the following may have


occurred: an unrecoverable media error,
motor failed to restart, the drive did not
become ready, electronics card test failed,
bus test failed, media format failed, or
diagnostic test failed.

707-116

707-117
707-118

D
D

707
707

Description: A write protect error occurred.


Description: A SCSI command time-out.

707-120
to
707-124

707

Description: A SCSI error.

707-126

707

Description: A software error was caused


by a hardware failure.

707-128

707

Description: The error log analysis


indicates a hardware failure.

707-129

D50

Description: Error log analysis indicates


a SCSI bus problem.

A disk drive hardware error occurred.


The adapter failed to configure.software
The device failed to configure.B88 software
The certify operation failed.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

a SCSI bus problem.


707-130

707

Description: Error log analysis indicates


a problem reported by the disk drive's self
monitoring function.

707-132
707-134
707-135
707-136

D
D
D
D

707
B88
707
707

Description:
Description:
Description:
Description:

707-137

707

Description: Unit attention condition has


occurred on the Send Diagnostic command.

709-101

709

Description: Cannot run the test because


the device driver detected a hardware error.

709-111

709

Description: Could not do the test because


the device driver detected a hardware error.

709-112

709

Description: Unable to determine the type


of adapter from the VPD.

709-113
709-114
709-115
709-116
709-117
709-118
709-119

D
D
D
D
D
D
F

709
709
709
D57
684
837
709

Description:
Description:
Description:
Description:
Diagnostics:
Description:
Description:

709-151

837

Description: Could not perform because the


device driver detected a hardware error.

709-152
709-153

D
D

837
837

Description: The data wrap communication test failed.


Description: The modem control line test failed.

709-154

684

Diagnostics: Cannot run the test because


the device driver detected a hardware error.

709-155

684

Diagnostics: The data wrap communications test failed.

709-161

266

Description: Could not perform because the


device driver detected a hardware error.

709-162
709-163
709-164

D
D
D

266
266
D06

Description: The data wrap communication test failed.


Description: The modem control line test failed.
Description: The data wrap communicationtest failed.

709-171

259

Description: Could not perform because the


device driver detected a hardware error.

709-172
709-173

D
D

259
259

Description: The data wrap communication test failed.


Description: The modem control line test failed.

open in browser PRO version

A disk drive hardware error occurred.


The adapter failed to configure.software
The device failed to configure.B88software
The certify operation failed.

The VPD verification test failed.


The register verification test failed.
The VPD verification test failed.
The 128-port controller line test failed.
Remote Async Node test failed.
Remote async node test failed.
Sync line termination test failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

709-174

263

Description: Cannot run the test because


the device driver detected a hardware error.

709-175

263

Description: The data wrap communications test failed.

709-181

261

Description: Could not perform because the


device driver detected a hardware error.

709-182
709-183

D
D

261
261

Description: The data wrap communication test failed.


Description: The modem control line test failed.

709-251

709

Description: Could not perform because the


device driver detected a hardware error.

709-252
709-253

D
D

709
709

Description: The data wrap communication test failed.


Description: The modem control line test failed.

709-254

709

Diagnostics: Cannot run the test because


the device driver detected a hardware error while
running the Remote Async Node wrap test.

709-255

709

Diagnostics: The data wrap communications


test failed while running the Remote Async
Node wrap test.

684
709-271

709

Description: Could not perform because the


device driver detected a hardware error.

709-272
709-273

D
D

709
709

Description: The data wrap communication test failed.


Description: The modem control line test failed.

709-274

709

Diagnostics: Cannot run the test because


the device driver detected a hardware error while
running the Printer/Terminal cable wrap test.

709-275

709

Diagnostics: The data wrap communications


test failed while running the
Printer/Terminal cable wrap test.

684
709-281

709

Description: Could not perform because the


device driver detected a hardware error.

709-282
709-283

D
D

709
709

Description: The data wrap communication test failed.


Description: The modem control line test failed.

709-481

D56

Description: Could not do the test because


the device driver detected a hardware error.

709-482
709-483

D
D

D56
D56

Description: The data wrap communication test failed.


Description: The modem control line test failed.

709-901

software

to
709-920

709

open in browser PRO version

Description: An unexpected error occurred


that can be attributed to software or
hardware.
Action: Run diagnostics from a source other

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

709-920

Action: Run diagnostics from a source other


than from the disk or a network. If the
same error occurs or if the original SRN
was not obtained from disk or a network
based diagnostics, use Chapter 12. "MAP
0210: General Problem Resolution" with a
FFC of 709; otherwise, suspect a software
problem.

709-921

709

709-922

software

to
709-924

709

709-925

709

709-926

software

to
709-943

709

721

Description: The adapter failed to configure software


Description: An unexpected error occurred
that can be attributed to software or
hardware.
Action: Run diagnostics from a source other
than from the disk or a network. If the
same error occurs or if the original SRN
was not obtained from disk or a network
based diagnostics, use Chapter 12. "MAP
0210: General Problem Resolution" with a
FFC of 709; otherwise, suspect a software problem.
Description: The adapter failed to configure software
Description: An unexpected error occurred
that can be attributed to software or
hardware.
Action: Run diagnostics from a source other
than from the disk or a network. If the
same error occurs or if the original SRN
was not obtained from disk or a network
based diagnostics, use Chapter 12. "MAP
0210: General Problem Resolution" with a
FFC of 709; otherwise, suspect a software problem.

721-102
to
721-114

Description: Unknown SCSI or device error.

721-116

721-117
721-118

D
D

721
721

Description: A write protect error occurred.


Description: A SCSI command time-out.

721-120
to
721-124

721

Description: Unknown SCSI or device error.

721-126

721

Description: A software error was caused


by a hardware failure.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

721-128

721

Description: The error log analysis


indicates a hardware failure.

721-130

721

Description: The error log analysis


indicates a hardware failure.

721-132
721-135
722-xxx
723-xxx
724-xxx

D
D
D
D
D

721
721
722
723
724

Description:
Description:
Description:
Description:
Description:

733-110
to
733-120

733

Description: The Reserve command failed,


or the Inquiry command failed.

733-130
to
733-135

733

Description: The Load command failed, or


the Unload command failed. media

733-140

733

Description: The Mode Select command failed.

733-150
to
733-169

733

Description: The Test Unit Ready command


failed, or the Send Diagnostic command
failed.

733-170

733

Description: The Read, Write and Compare


test failed. media

733-180
to
733-185

733

Description: The Load command failed, or


the Unload command failed. media

733-190

733

Description: The Mode Select command failed.

733-200
733-210

D
D

733
733

Description: The Test Unit Ready command media failed.


Description: The device configuration failed.

733-220
to
733-240

733

Description: 140GB 8mm tape drive failed.

733-300
733-310
733-320

D
D
G

733
B88
733

Description: The device configuration failed.software


Description: SCSI adapter configuration failed.software
Description: Error log analysis indicates a failure.media

733-411
to
733-423

733

Description: A reservation conflict


occurred.
software

733-511
to
733-523

media

B88
733

A disk drive hardware error occurred.


The device failed to configure.B88software
Unknown disk drive type is failing.
Unknown CD-ROM type is failing.
Unknown tape drive failure.

Description: The drive returned bad or


non-extended sense data.

B88

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

733-611
to
733-723

733

734-111
734-112
734-113
734-121
734-122
734-123
734-125
734-126
734-127
734-128
734-129
734-150
734-151
734-152
734-162
734-171
734-172
734-173
734-175
734-198
734-199
734-211
734-281
734-301
734-302
736-101

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
G
G
D

734
734
734
734
734
734
734
734
734
734
734
Media
734
734
734
734
734
734
734
734
734
734
734
734
734
821

736-102

736

Description: An unexpected device or


adapter error occurred.

736-103
736-104
736-105
736-106
736-201

D
D
D
D
D

736
736
736
736
821

Description:
Description:
Description:
Description:
Description:

736-202

736

Description: An unexpected device or


adapter error occurred.

736-203
736-204
736-205
736-206
736-301

D
D
D
D
D

736
736
736
736
821

Description:
Description:
Description:
Description:
Description:

736-302

736

Description: An unexpected device or


adapter error occurred.

736-303

736

Description: An error occurred in turning


on the lamps.

B88

open in browser PRO version

Description: An adapter, device, or bus


I/O error occurred.
software
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

Unable to reserve device.


Unable to do configuration.
Unable to open the device driver.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
A media error was detected.
A command timeout was detected.
A command reservation conflict was detected.
The CD-ROM drive indicates an error.
Unable to reserve device.
Unable to do configuration.
Unable to open device driver.
The CD-ROM drive indicates an error.
Undefined error detected.
Undefined error detected.
The LED test failed.
No tone during audio test.
Errors found during ELA.
Errors found during ELA.
An unexpected adapter error occurred.

The keyboard reset failed.


Unknown keyboard.
The keyboard light on test failed.
The keyboard light off test failed.
An unexpected adapter error occurred.

The read keyboard ID test failed.


The keyboard layout ID test failed.
The keyboard echo test failed.
The select scan code set test failed.
An unexpected adapter error occurred.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

736-304

736

Description: An error occurred in turning


off the lamps.

736-401

821

Description: An unexpected adapter error occurred.

736-402

736

Description: An unexpected device or


adapter error occurred.

736-403
736-404
736-701

D
D
D

736
736
736

Description: Unable to recognize the keyboard.


Description: The keyboard is failing.
Description: Error configuring the device.

736-901

821

Description: The error log analysis


indicates an adapter failure.

736-902

736

Description: The error log analysis


indicates a device failure.

736-903

736

Description: The error log analysis


indicates an unknown failure.

741-102
to
741-114

741

Description: SCSI disk drive problems.

741-116

741-117
741-118

D
D

741
741

Description: A write protect error occurred.


Description: A SCSI command timeout.

741-120
to
741-124

741

Description: SCSI disk drive problems.

741-126

741

Description: A software error was caused


by a hardware failure.

741-128

741

Description: The error log analysis


indicates a hardware failure.

741-129

D50

Description: Error log analysis indicates


a SCSI bus problem. software

741-130

741

Description: Error log analysis indicates


a problem reported by the disk drive's self
monitoring function.

741-132
741-134

D
D

741
B88

Description: A disk drive hardware error occurred.


Description: The adapter failed to configure.software

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

741-134
741-135

D
D

B88
741

Description: The adapter failed to configure.software


Description: The device failed to configure.B88software

741-137

741

Description: Unit attention condition has


occurred on the Send Diagnostic command.

742-101
742-102
742-104
742-105
742-106
742-121
742-122
742-124
742-125
742-126
742-141
742-142
742-144
742-145
742-160
742-161
742-203
742-223
742-224
742-225
742-243

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

742
742
742
742
742
D59
D59
D59
D59
D59
D60
D60
D60
D60
B08
B09
742
D59
B08
B09
D60

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

742-700

742

Description: Error log analysis indicates


a hardware problem
software

742-720

D59

Description: Error log analysis indicates


a hardware problem
software

742-740

D60

Description: Error log analysis indicates


a hardware problem
software

745-100

media

Description: Recovered error.


Action: No action required.

745-200

media

Description: Drive Not Ready.


Action: Install media, refer to the tape
autoloader service guide.

745
745-300
to
745-350

745-400

media

Description: 4mm Tape Auto Loader problem.

745

Action: Replace media, clean drive, refer


to the tape autoloader service guide.

745
magazine

745-410
to

Configuration register test failed


I/O register test failed
Internal loopback test failed
Internal loopback test failed
External loopback test failed
Configuration register test failed
I/O register test failed
Internal loopback test failed
Internal loopback test failed
External loopback test failed
Configuration register test failed
I/O register test failed
Internal loopback test failed
Internal loopback test failed
10Base-T transceiver test failed
10Base-2 transceiver test failed
Device configuration failed software
Device configuration failed software
10 Base-T transceiver test failed
10 Base-2 transceiver test failed
Device configuration failed software

745

open in browser PRO version

Description: General Hardware Failure.


Action: Replace media, clean drive, refer
to the tape autoloader service guide. media
Description: Internal Hardware Failure
Action: Replace drive, refer to the tape

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

745-435
745-440

media
D

745-441
to
745-443

745-444

745
SCSI

Description: SCSI Hardware Failure.


Action: Replace drive, refer to the tape
autoloader service guide. Adapter

745

Description: 4mm Tape Auto Loader problem.

media
745
environ-

745-445

clean
media

745-460
to
745-465

745-470
to
745-475

745-480
to
745-485

745-500

745
magazine
745
magazine
745
magazine
745
system

745-600

745
system

745-700

745
media

745-800

745
media

745-B00

745
SCSI

745-D00

autoloader service guide.

745

open in browser PRO version

Action: Replace drive, refer to the tape


autoloader service guide.
Description: Humidity too High
Action: Lower humidity, replace media,
refer to the tape autoloader service guide. media
Description: Drive Requires Cleaning
Action: Clean drive, replace media, refer
to the tape autoloader service guide. drive
Description: Magazine Movement Failure
Action: Check magazine and media, clean
rollers, refer to the tape autoloader
service guide.
media
Description: Media Insert/Eject Failure
Action: Check clean magazine and media,
clean rollers, refer to the tape autoloader
service guide.
media
Description: Drawer Open/Close Failure
Action: Check magazine and media, refer to
the tape autoloader service guide.
media
Description: Illegal request to drive
Action: Software conflict, refer to the
tape autoloader service guide.
Description: Unit Attention
Action: Software conflict, media changed,
refer to the tape autoloader service guide.
Description: Not Writeable
Action: Check media for write protect,
refer to the tape autoloader service guide.
Description: Blank Media
Action: Check media, refer to the tape
autoloader service guide.
Description: SCSI Interface Failure
Action: Check SCSI interface, refer to the
tape autoloader service guide. Adapter
Description: Tape Full
Action: Check replace media, refer to the

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

media
746-212

746
221

746-213

746
221

746-214

746
221

746-215

746
221

746-216

746
221

746-217

746
221

746-218

746
221

746-219

746
221

746-220

746
221

746-221

746
221

746-222

746
221

746-223

746
221

746-224

746

open in browser PRO version

Action: Check replace media, refer to the


tape autoloader service guide.
Description: FIFO empty bit set.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: FIFO empty bit clear.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: FIFO full bit set.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: FIFO full bit clear.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: FIFO data miscompare.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: SCSI FIFO data miscompare.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: SCSI FIFO underflow.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: SCSI parity error.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: SCSI FIFO flags error.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: Miscompare during the
write/read of the configuration register.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: Error during the write/read
of the memory register.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: Miscompare during the
write/read of the memory I/O register.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: Error reading the PCI

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

configuration register.
746-225

746

Description: Adapter POST failed.

746-230

D50

Description: Arbitration test failed.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

746
746-231

D50
746

746-232

D50
746

746-240

746
221

Description: Function could not complete.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: SCSI bus data miscompare.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: No terminal power.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

746-301

746

Description: Configuration open failed for


parent bus. D50 software

746-700

746

Description: Error log analysis indicates


a PCI SCSI adapter failure. software

746-701

746

Description: Error log analysis indicates


a PCI SCSI adapter failure. software

746-702

746

Description: Error log analysis indicates


a PCI SCSI adapter failure. software

746-703

746

Description: Error log analysis indicates


a PCI SCSI adapter failure. software

746-704

746

Description: Error log analysis indicates


a PCI SCSI adapter failure. software

746-705

746

Description: Error log analysis indicates


a PCI SCSI adapter failure. software

746-800

746

Description: Error log analysis indicates


a PCI SCSI adapter PTC failure.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

746-802

746

Description: Error log analysis indicates


a PCI SCSI bus failure.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

747-212

747

Description: FIFO empty bit set.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

221

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

747-213

747
221

747-214

747
221

747-215

747
221

747-216

747
221

747-217

747
221

747-218

747
221

747-219

747
221

747-220

747
221

747-221

747
221

747-222

747
221

747-223

747
221

Description: FIFO empty bit clear.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: FIFO full bit set.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: FIFO full bit clear.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: FIFO data miscompare.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: SCSI FIFO data miscompare.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: SCSI FIFO underflow.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: SCSI parity error.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: SCSI FIFO flags error.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: Miscompare during the
write/read of the configuration register.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: Error during the write/read
of the memory register.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: Miscompare during the
write/read of the memory I/O register.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

747-224

747

Description: Error reading the PCI


configuration register.

747-225

747

Description: Adapter POST failed.

747-230

D50

Description: Arbitration test failed.


Action: Go to Chapter 7. "MAP 0050: SCSI

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

747-231

747

Problems Isolation Procedure".

D50

Description: Function could not complete.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

747
747-232

D50
747

747-240

747
221

Description: SCSI bus data miscompare.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: No terminal power.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

747-301

747

Description: Configuration open failed


for parent bus.software

747-700

747

Description: Error log analysis indicates


a PCI SCSI adapter failure.
software

747-701

747

Description: Error log analysis indicates


a PCI SCSI adapter failure.
software

747-702

747

Description: Error log analysis indicates


a PCI SCSI adapter failure. software

747-703

747

Description: Error log analysis indicates


a PCI SCSI adapter failure. software

747-704

747

Description: Error log analysis indicates


a PCI SCSI adapter failure. software

747-705

747

Description: Error log analysis indicates


a PCI SCSI adapter failure. software

747-800

747

Description: Error log analysis indicates


a PCI SCSI adapter PTC failure.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

747-802

747

Description: Error log analysis indicates


a PCI SCSI bus failure.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

749-xxx

749

Description: 7331 Model 205 Tape Library.


Refer to service documentation for this device.

750-100
750-200
750-201
750-202
750-300
750-301
750-302

D
D
D
D
D
D
D

750
750
750
750
256
256
256

Description:
Description:
Description:
Description:
Description:
Description:
Description:

open in browser PRO version

The adapter open test failed.


Config register test failed.
I/O register test failed.
Adapter self-test failed.
The connect test failed.
Token-ring internal wrap test failure.
Token-ring external wrap failure

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

750-302
750-303
750-400
750-401
750-402
750-403
750-700
751-101
751-102
751-103
751-104

D
D
D
D
D
D
G
D
D
D
D

256
256
240
240
240
240
750
751
751
751
Cable

751-105

Backplane/

Description: Token-ring external wrap failure


Description: Token-ring initialization test failure
Description: The connect test failed.
Token-ring internal wrap test failure
Token-ring external wrap test failure
Token-ring initialization test failure
Description: Error Log analysis indicateda hardware failure.
Description: The PCI wrap test failed
Description: The POST indicates an adapter failure.
Description: The POST indicates an adapter channel failure.
Description: The POST indicates a defective cable.

Ext.Encl

Description: The POST indicates a


defective backplane or external enclosure.
Action: If the disk devices are located in
an external enclosure, refer to the service
documentation for the external enclosure.
Description: The POST indicates a disk failure.
Description: The POST indicates a firmware failure.

751-106
751-107

D
D

Disk
751

751-108

751

Description: The NVRAM test indicates an


adapter firmware failure.

751-109

751

Description: The NVRAM test indicates an


adapter failure.

751-110

Disk

Description: The disk reported a


Predictive Failure Analysis error (PFA).

751-111

Disk

Description: The disk drive has been


failed by the adapter.

751-112

Disk

Description: ELA indicates that the disk


reported a irrecoverable equipment error.

751-113

Disk

Description: ELA indicates that the disk


reported a irrecoverable data error.

757-110
757-120
757-130
757-135
757-140
757-150
757-160
757-169
757-170
757-180
757-185
757-190
757-200
757-210
757-220
757-230

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

757
757
757
757
757
757
757
757
757
757
757
757
757
757
757
757

open in browser PRO version

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

The
The
The
The
The
The
The
The
The
The
The
The
The
The
The
The

Reserve command failed.


Inquiry command failed.
Load command failed. media
Unload command failed. media
Mode Select command failed.
Test Unit Ready command failed. media
Send Diagnostic command failed. media
send diagnostic command failed. media
Read, Write and Compare test failed. media
Load command failed. media
Unload command failed. media
Mode Select command
failed.
Test Unit Ready command failed.media
device configuration failed.
Release command failed.
Request Sense command failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

757-240
757-300
757-310
757-320

D
D
D
D

757
757
B88
757

Description:
Description:
Description:
Description:

757-411
to
757-423

757

Description: A reservation conflict


occurred.
software

757-511
to
757-523

757-611
to
757-623

757-711
to
757-723

772-098
772-099
772-102
772-104
772-105
772-106
772-108
772-110
772-112
772-114

J
J
D
D
D
D
D
D
D
D

772-116

772-117
772-118
772-120
772-122
772-124

D
D
D
D
D

772
772
772
772
772

772-126

772

772-128

772

772-129

D50

Description: Error log analysis indicates


a SCSI bus problem. 772 B88 software

772-130

772

Description: Error log analysis indicates

B88
757

The Openx command failed.


The device configuration failed.software
SCSI adapter configuration failed.software
Error log analysis indicates a failure. media

Description: The drive returned bad or


non-extended sense data.

B88
757
B88
757
B88
772
772
772
772
772
772
772
772
772
772

Description: An adapter or bus I/O error


occurred.
software
Description: A device timeout error
occurred.
software
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

Disk drive indicates an error. B88


Disk drive not found.
An unrecoverable media error.
The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

Description:
Description:
Description:
Description:
Description:

A
A
A
A
A

write protect error occurred.


SCSI command time-out.
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error.

Description: A software error was caused


by a hardware failure.
Description: The error log analysis
indicates a hardware failure.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

772-130

772

Description: Error log analysis indicates


a problem reported by the disk drive's self
monitoring function.

772-132
772-134
772-135
772-136

D
D
D
D

772
B88
772
772

Description:
Description:
Description:
Description:

772-137

772

Description: Unit attention condition has


occurred on the Send Diagnostic command.

773-098
773-099
773-102
773-104
773-105
773-106
773-108
773-110
773-112
773-114

J
J
D
D
D
D
D
D
D
D

773
773
773
773
773
773
773
773
773
773

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

773-116

773-117
773-118
773-120
773-122
773-124

D
D
D
D
D

773
773
773
773
773

Description:
Description:
Description:
Description:
Description:

773-126

773

Description: A software error was caused


by a hardware failure.

773-128

773

Description: The error log analysis


indicates a hardware failure.

773-129

D50

Description: Error log analysis indicates


a SCSI bus problem.

773-130

773

Description: Error log analysis indicates


a problem reported by the disk drive's self
monitoring function.

773-132
773-134
773-135
773-136

D
D
D
D

773
B88
773
773

773-137

773

A disk drive hardware error occurred.


The adapter failed to configure.software
The device failed to configure.software
The certify operation failed.

Disk drive indicates an error.


Disk drive not found.
An unrecoverable media error.
The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

Description:
Description:
Description:
Description:

A
A
A
A
A

write protect error occurred.


SCSI command time-out.
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error.

A disk drive hardware


The adapter failed to
The device failed to
The certify operation

error occurred.
configure. software
configure.software
failed.

Description: Unit attention condition has

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

occurred on the Send Diagnostic command.


774-098
774-099
774-102
774-104
774-105
774-106
774-108
774-110
774-112
774-114

J
J
D
D
D
D
D
D
D
D

774
774
774
774
774
774
774
774
774
774

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

Disk drive indicates an error.


Disk drive not found.
An unrecoverable media error.
The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

774-116

774-117
774-118
774-120
774-122
774-124

D
D
D
D
D

774
774
774
774
774

Description:
Description:
Description:
Description:
Description:

774-126

774

Description: A software error was caused


by a hardware failure.

774-128

774

Description: The error log analysis


indicates a hardware failure.

774-129

D50

Description: Error log analysis indicates


a SCSI bus problem.774 B88 software

774-130

774

Description: Error log analysis indicates


a problem reported by the disk drive's self
monitoring function.

774-132
774-134
774-135
774-136

D
D
D
D

774
B88
774
774

Description:
Description:
Description:
Description:

774-137

774

Description: Unit attention condition has


occurred on the Send Diagnostic command.

775-001
775-002
775-007
775-009
775-064
775-101
775-102
775-103

D
D
D
D
D
D
D
D

775
775
Info code
Info code
775
775
775
775

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

A
A
A
A
A

write protect error occurred.


SCSI command time-out. B88
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error.

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

A disk drive hardware error occurred.


The adapter failed to configure.software
The device failed to configure.software
The certify operation failed.

"NO" to color panel Monitor


"NO" to cursor panel Monitor
The EMC_SCROLLING_17_H_TEST failed
The EMC_SCROLLING_21_H_TEST failed
TRIO64V+_TIMEOUT
Color miscompare
Clipping error
Rectangle fill test failed

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

775-103
775-128
775-161
775-191
775-193
775-1FF
775-201
775-202
775-203
775-211
775-212
775-215
775-217
775-233
775-234
775-235
775-236
775-237
775-241
775-263
775-2FF

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

775
software
software
775
775
775
775
775
775
software
software
775
775
software
software
software
software
software
Info code
Info code
775

775-301

775

Description: A write of "0x00" to the


palette register failed

775-302

775

Description: A write of "0x15" to the


palette register failed

775-303

775

Description: A write of "0x2A" to the


palette register failed

775-304

775

Description: A write of "0x3F" to the


palette register failed

775-305

775

Description: The test of the palette


registers failed

775-3FF

775

Description: The test of the palette


registers failed

775-401
775-402
775-403
775-404
775-447
775-449
775-471
775-473
775-495
775-497
775-4FF
775-501
775-502
775-503
775-5FF

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

775
775
775
775
775
775
775
775
Info code
Info code
775
775
775
775
775

open in browser PRO version

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

Rectangle fill test failed


MALLOC_ERROR
Loop count value in rules file is zero
Red screen error
Green screen error
Rectangle fill test failed
Color miscompare
Clipping error
Image transfer across Plane Test failed
INTERNAL_ERROR_DATA_SIZE
INTERNAL_ERROR_NO_ACCESS
Black screen error
9 x 7 Cross hatch grid failed.
OPEN_RCM_ERROR
IOCTL_GSC_HANDLE_FAILED
AIXGSC_MAKE_GP_FAILED
AIXGSC_UNMAKE_GP_FAILED
DEVICE_BUSY_ERROR
The SCROLLING_17_H_TEST failed.
The EMC_SCROLLING_21_H_TEST failed
Image transfer across Plane Test failed

Frame buffer base address inconsistent


VRAM inaccessible
Miscompare found in VRAM
The test of the VRAM failed
Green screen error
Blue Screen error
9 x 7 Cross hatch grid failed.
11 x 9 Cross hatch grid failed.
The SCROLLING_17_H_TEST failed.
The SCROLLING_21_H_TEST failed.
The test of the VRAM failed
Color miscompare
Clipping error
Direct Frame Buffer test failed
Direct Frame Buffer test failed

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

775-601
775-602
775-6FF
775-701
775-702

D
D
D
D
D

775
775
775
775
775

Description:
Description:
Description:
Description:
Description:

775-703

775

Description: Blue Screen error, or 90


Degree Short Stroke Draw failed

775-704

775

Description: 135 Degree Short Stroke Draw failed

775-705

775

Description: White screen error, or 180


Degree Short Stroke Draw failed

775-706
775-707
775-708
775-709
775-727
775-750
775-753
775-7FE
775-7FF
775-801
775-802
775-803
775-804
775-805
775-8FF
775-901
775-902
775-903
775-904
775-905
775-906
775-907
775-908
775-909
775-9FF
775-937
775-959
775-961
775-A01
775-A02
775-A03
775-A04
775-A05
775-A06
775-A07
775-A08
775-A09
775-A0A
775-A0B
775-A0C
775-A0D

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

775
775
775
775
775
Info code
Info code
775
software
775
775
775
775
775
775
775
775
775
775
775
775
775
775
775
775
775
775
775
775
775
775
775
775
775
775
775
775
775
775
775
775

open in browser PRO version

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

Video Stream Register test failed


Video Stream hardware test failed
Video Stream hardware test failed
0 Degree Short Stroke Draw failed
45 Degree Short Stroke Draw failed

225 Degree Short Stroke Draw failed


270 Degree Short Stroke Draw failed
315 Degree Short Stroke Draw failed
Short Stroke Vector Function test failed
11 x 9 Cross hatch grid failed.
The SCROLLING_21_H_TEST failed.
The EMC_SCROLLING_17_H_TEST failed
Short Stroke Vector Function test failed
Bad vector detected
Color for PatBlt thru screen failed
Clipping for PatBlt thru screen failed
Color for PatBlt Across screen failed
Clipping for PatBlt Across screen failed
Pattern Fill Across the Plane test failed
Pattern Fill Across the Plane test failed
Color miscompare of white boxes detected
Clipping error of white boxes detected
Color miscompare of color bars detected
Clipping error of white boxes detected
Color miscompare of white boxes detected
Clipping error of white boxes detected
Color miscompare of white boxes detected
Clipping miscompare of white boxes detected
The Area fill test (color bars) failed
The Area fill test (color bars) failed
Red screen error
White screen error
Black screen error
Color miscompare of horizontal top line
Clipping error of horizontal top line
Color miscompare of vertical right line
Clipping error of vertical right line
Color miscompare of horizontal bottom line
Clipping error of horizontal bottom line
Color miscompare of vertical left line
Clipping error of vertical left line
Color miscompare of horizontal center line
Clipping error of horizontal center line
Color miscompare of vertical center line
Clipping error of vertical center line
Reserved

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

775-A0D
775-A0F
775-A10
775-A11
775-A12
775-AFF
775-B01
775-B02

D
D
D
D
D
D
D
D

775
775
775
775
775
775
775
775

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

775-B03

775

Description: Clipped Area Horizontal color


miscompare (background line color wrong)

775-B04

775

Description: Clipped Area Horizontal clip


miscompare (clip of background line wrong)

775-B05

775

Description: Clipped Area Vertical color


miscompare (background line color wrong)

775-B06

775

Description: Clipped Area Vertical clip


error (clip of background line wrong)

775-B07
775-BFF
775-C01
775-C02
775-CFF
775-D01
775-DFF
776-104
776-105
776-106
776-201
776-202
776-203
776-204
776-205
776-206
776-304
776-305
776-306
776-404
776-405
776-406

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

775
775
775
775
775
775
775
D46
D46
D46
776
776
776
776
776
776
D46
D46
D46
240
240
240

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

776-414

240

Description: Connect Test Failure. This


failure occurs if not connected to a
functional Token-Ring network.
Action: Run advanced diagnostics for this
resource to obtain correct problem
isolation.

D46
776
776-415

240
D46

open in browser PRO version

Reserved
Reserved
Color miscompare of textured top line
Clipping error of textured top line
Line Drawing Function test failed
Line Drawing Function test failed
Rectangle Area Color miscompare detected
Rectangle Area Clip error detected

The clipping function test failed.


The clipping function test failed.
The BIOS read failed.
The BIOS function test failed.
The BIOS function test failed.
The HW cursor function test failed.
The HW cursor function test failed.
Connect Test Failure
Wrap Test Failure
Wrap Test Failure
Configuration Register Test Failure
I/O Test Failure
Adapter On-Card Test Failure
Connect Test Failure
Wrap Test Failure
Wrap Test Failure
Connect Wrap Test Failure
Wrap Test Failure
Wrap Test Failure
Connect Test Failure
Wrap Test Failure
Wrap Test Failure.

Description: Wrap Test Failure. This


failure occurs if not connected to a
functional Token-Ring network.
Action: Run advanced diagnostics for this

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

776-416

776

resource to obtain correct problem


isolation.

240

Description: Wrap Test Failure. This


failure occurs if not connected to a
functional Token-Ring network.
Action: Run advanced diagnostics for this
resource to obtain correct problem
isolation.

D46
776
776-702

776

Description: ELA indicates a Token-Ring


adapter check.

776-703

776

Description: ELA indicates that the


Token-Ring device driver has experienced a
DMA failure

221
776-704

776
221

776-705

776
221

Description: ELA indicates that the


Token-Ring device driver has experienced a
PCI bus failure
Description: ELA indicates that the
Token-Ring device driver has seen a
Programmed I/O (PIO) failure.

777-201
777-202
777-203
777-204
777-205
777-206
777-207
777-208

D
D
D
D
D
D
D
D

777
777
777
777
777
777
777
777

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

777-701

777

Description: Error log analysis indicates


that the adapter is not responding to
initialization commands.

221
777-702

777
221

777-703

777
221

Configuration Register Test Failure 221


I/O Test Failure
221
Adapter initialization test failure 221
Internal wrap test failure 221
Internal wrap test failure 221
External wrap (10Mbps) testfailure 221
Internal wrap test failure
221
External wrap (100Mbps) test failure

Description: Error Log Analysis indicates


that the device driver has detected a PIO
error which it was unable to correct.
Description: Error log analysis indicates
that the adapter has been shut down due to
an unrecoverable error.

777-704

777

Description: Error Log Analysis indicates


a problem with the EEPROM on the adapter 221

780-101
780-102
780-109

D
D
D

780
780
780

Description: Adapter logic test failure 227


Description: Adapter logic test failure.
Description: Adapter channel Input/Output test failure.

780-113

780

Description: Adapter Serial Communication


Controller (SCC) test failure.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

Controller (SCC) test failure.


780-114

780

Description: Adapter logic test failure. 227

780-120

780

Description: Adapter could not be detected


or configured.
227 software

780-140

271

Description: An error was found with the


X.21 interface adapter cable.
780

780-150

272

Description: An error was found with the


X.24 interface adapter cable. 780

780-160

273

Description: An error was found with the


X.35 interface adapter cable.
780

780-170
780-180
780-190
780-210
780-211
780-230
780-232
780-240
780-250
780-260
780-270
780-280
780-290

D
D
D
D
D
D
D
D
D
D
D
D
D

780
780
780
780
780
780
849
780
185
780
780
780
780

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

780-300

780

Description: An adapter error was found


during error log analysis.

780-310

780

Description: An adapter error was found


during error log analysis.
185

780-320

780

Description: An adapter error was found


during error log analysis.
227

780-330

780

Description: Error log analysis indicates


a hardware problem.
227

780-400

780

Description: A software error was caused


by a hardware failure.
227

780-700
780-720
780-721
780-722

D
D
D
D

780
780
780
780

Description:
Description:
Description:
Description:

781-101

781

Description: ROS POST adapter software


initialization error.
227

781-102
781-103

D
D

781
781

Description: Extended DRAM SIP test failed.


Description: ROS checksum test failed.

open in browser PRO version

The adapter hardware failed.


The adapter hardware failed.
The adapter hardware failed.
An error was found on the adapter.185
The adapter card POST test failed. 227
The adapter card hardware failed.
The adapter card hardware failed.227
The adapter card hardware failed.
An error was found on the adapter.780
The adapter card hardware failed.
The adapter card hardware failed.
The adapter card hardware failed.
The adapter card hardware failed.

The adapter failed to configure.227 software


Cable wrap test failed.
Port wrap test failed.
Cable wrap test failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

781-104
781-105
781-106
781-107
781-108
781-109
781-111
781-112
781-113
781-114
781-116
781-117
781-118
781-119

D
D
D
D
D
D
D
D
D
D
D
D
D
D

781
781
781
781
781
781
781
781
781
781
254
253
257
260

Adapter download diagnostics failed 227


Description: Memory size test failed. 227
Description: Interface ID test failed. 227
Description: EIB ID test failed.227
Description: ROS version test failed. 227
Description: DUSCC register test failed.
Description: DMA register test failed.
Description: X.21 PAL test failed.
Description: External wrap test failed.
Description: Twin tail logic test failed. 227
Description: The RS-232 cable wrap test failed.
Description: The RS-422A cable wrap test failed.
Description: The V.35 cable wrap test failed.
Description: The X.21 cable wrap test failed.

781-120

781

Description: The adapter was not detected


or could not be configured. test failed.
software

227
781-121

781

Description: The 4-port jumper cable


assembly wrap test failed. 227 software

781-200

781

Description: The error log analysis


indicates the adapter failed.

781-221

781

Description: The error log analysis


indicates the adapter hardware failed.

781-231
781-501
781-502
781-503
781-504
781-505
781-506
781-507
781-508
781-516
781-517
781-720
783-110
783-120
783-130
783-135
783-140
783-150
783-160
783-169
783-170
783-180
783-185
783-190
783-200
783-210
783-220

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

855
B77
B77
781
B69
B71
B72
B73
B74
B77
B69
258
783
783
783
783
783
783
783
783
783
783
783
783
783
783
783

open in browser PRO version

227

Description: No interface card detected. 227


Description: The power-on self-test (POST)failed.B69 227
Description: The memory module failed.
Description: Adapter hardware failure. 227
Description: Adapter hardware failure.
Description: Adapter hardware failure. B69
Description: Adapter hardware failure. B69
Description: Adapter hardware failure. B69
Description: Adapter hardware failure. B69
Description: Adapter Test Failure
B69
Description: Adapter Test Failure
B77
4-port multiprotocol cable
781
Description: The Reserve command failed.
Description: The Inquiry command failed.
Description: The Load command failed. media
Description: The Unload command failed. media
Description: The Mode Select command failed.
Description: The Test Unit Ready command failed.media
Description: The Send Diagnostic command failed.media
Description: The send diagnostic command failed.media
Description: The Read, Write and Compare test failed.media
Description: The Load command failed. media
Description: The Unload command failed. media
Description: The Mode Select command failed.
Description: The Test Unit Ready command failed.media
Description: The device configuration failed.
B88
Description: The Release command failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

783-220
783-230
783-240
783-300
783-310
783-320

D
D
D
D
D
G

783
783
783
783
B88
783

Description:
Description:
Description:
Description:
Description:
Description:

783-411
to
783-423

783

Description: A reservation conflict


occurred.
software

783-511
to
783-523

783-611
to
783-623

783-711
to
783-723

784-102
784-104
784-105
784-106
784-108
784-110
784-112
784-114

D
D
D
D
D
D
D
D

784-116

784-117
784-118
784-120
784-122
784-124

D
D
D
D
D

784
784
784
784
784

Description:
Description:
Description:
Description:
Description:

784-126

784

Description: A software error was caused


by a hardware failure.
B88

784-128

784

Description: The error log analysis


indicates a hardware failure.

784-129

D50

Description: Error log analysis indicates


a SCSI bus problem. 784 B88 software

784-130

784

Description: Error log analysis indicates

B88
783

The Release command failed.


The Request Sense command failed.
The Openx command failed.
The device configuration failed.software
SCSI adapter configuration failed.783 software
Error log analysis indicates a failure. media

Description: The drive returned bad or


non-extended sense data.

B88
783
B88
783

Description: An adapter or bus I/O error


occurred.
software

B88

Description: A device timeout error


occurred.
software

784
784
784
784
784
784
784
784

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

An unrecoverable media error.


The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

A
A
A
A
A

write protect error occurred.


SCSI command time-out.
B88
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

a problem reported by the disk drive's self


monitoring function.
784-132
784-134
784-135
784-136

D
D
D
D

784
B88
784
784

Description:
Description:
Description:
Description:

784-137

784

Description: Unit attention condition has


occurred on the Send Diagnostic command.

785-111

785

Could not do the test because the device


driver detected a hardware error.

785-114

785

The register verification test failed.

785-121

785

Could not do the test because the device


driver detected a hardware error.

785-122
785-123
785-124

D
D
D

785
785
785

The data wrap communication test failed.


The modem control line test failed.
The memory test failed.

785-151

785

Could not do the test because the device


driver detected a hardware error.

785-152
785-153

D
D

785
785

The data wrap communication test failed.


The modem control line test failed.

785-171

259

Could not do the test because the device


driver detected a hardware error.

785-172
785-173

D
D

259
259

The data wrap communication test failed.


The modem control line test failed.

785-181

261

Could not do the test because the device


driver detected a hardware error.

785-182
785-183

D
D

261
261

The data wrap communication test failed.


The modem control line test failed.

785-251

785

Could not perform because the device


driver detected a hardware error.

785-252
785-253

D
D

785
785

The data wrap communication test failed.


The modem control line test failed.

785-271

785

Could not perform because the device


driver detected a hardware error.

785-272
785-273

D
D

785
785

The data wrap communication test failed.


The modem control line test failed.

785-281

785

Could not perform because the device


driver detected a hardware error.

open in browser PRO version

A disk drive hardware error occurred.


The adapter failed to configure.software
The device failed to configure.software
The certify operation failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

driver detected a hardware error.


785-282
785-283

D
D

785
785

The data wrap communication test failed.


The modem control line test failed.

785-481

D57

Could not do the test because the device


driver detected a hardware error.

785-482
785-483

D
D

D57
D57

The data wrap communication test failed.


The modem control line test failed.

785-901

software

to
785-920

785

785-921

785

785-922

software

to
785-924

785

785-925

785

785-926

software

to
785-943

786-200

785

786

open in browser PRO version

Description: An unexpected error occurred


that can be attributed to software or
hardware.
Action: Run diagnostics from a source other
than from the disk or a network. If the
same error occurs or if the original SRN
was not obtained from disk or a network
based diagnostics, use Chapter 12. "MAP
0210: General Problem Resolution" with a
FFC of 785; otherwise, suspect a software
problem.
Description: The adapter failed to configure software
Description: An unexpected error occurred
that can be attributed to software or
hardware.
Action: Run diagnostics from a source other
than from the disk or a network. If the
same error occurs or if the original SRN
was not obtained from disk or a network
based diagnostics, use Chapter 12. "MAP
0210: General Problem Resolution" with a
FFC of 785; otherwise, suspect a software
problem.
Description: The adapter failed to configure software
Description: An unexpected error occurred
that can be attributed to software or
hardware.
Action: Run diagnostics from a source other
than from the disk or a network. If the
same error occurs or if the original SRN
was not obtained from disk or a network
based diagnostics, use Chapter 12. "MAP
0210: General Problem Resolution" with a
FFC of 785; otherwise, suspect a software
problem.
Description: Initiation failed D96
Note: You must determine which of the first
two FFCs is installed in the system unit.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

786-210
786-211
786-220
786-221
786-710
786-711
787-100
787-101
787-1AA
787-1xx
787-200
787-201
787-2AA
787-2xx
788-001
788-002
788-003
788-004
789-101
789-102
789-103
789-104
789-105
789-106
789-107

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

786
D96
786
D96
786
D96
787
787
787
787
D95
D95
D95
D95
788
software
software
788
789
789
789
789
789
789
789

789-200

789

Description: The optical disk failed to load.


Optical Disk Action: Change the media.
Run diagnostics
on the changed media in System Verification
mode. If the error reoccurs use Chapter 12.
"MAP 0210: General Problem Resolution";
otherwise, replace the media.

789-201

789

Description: Failed to unload the optical


disk.
Optical Disk Action: Change the media.
Run diagnostics
on the changed media in System Verification
mode. If the errors reoccur use Chapter 12.
"MAP 0210: General Problem Resolution";
otherwise, replace the media.

789-202

789

Description: The diagnostic test failed.


Action: Change the media. Run diagnostics
Optical Disk on the changed media in System Verification
mode. If errors do not reoccur, replace the
media; otherwise, run the drive cleaning
procedures if applicable and rerun the
diagnostics. If errors reoccur, or the
drive does not support the cleaning
procedures use Chapter 12. "MAP 0210:
General Problem Resolution".

789-204

789

Description: The device failed to configure.

open in browser PRO version

Description: The adapter test failed


Description: The adapter test failed
Description: The display test failed Cable Monitor
Description: The display test failed Cable Monitor
Description: The ELA indicates HW failure
The ELA indicates HW failure
GXT500P Graphics Adapter
Description: GXT500P Graphics Adapter
Description: GXT500P Graphics Adapter RGB Cable Display
Description: GXT500P Graphics Adapter
Description: GXT550P Graphics Adapter
Description: GXT550P Graphics Adapter
Description: GXT550P Graphics AdapterRGB Cable Display
Description: GXT550P Graphics Adapter
Description: Adapter Error
Description: System Error
Description: System Error
Description: System Error software
Description: Failed to release the device.
Description: Failed to reserve the device.
Description: The device motor failed to start.
Description: Failed to make the device ready.
Description: Failed to get the inquiry data.
Description: The Prevent Media Removal command failed.
Description: The Allow Media Removal command failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

789-205

789

Description: The Test Unit Ready command failed.


Optical Disk Action: Change the media. Run diagnostics
on the changed media in System Verification
mode. If the error reoccurs, use Chapter
12. "MAP 0210: General Problem Resolution";
otherwise, replace the media.

789-206

789

Description: The random write, read and


compare test failed.
Optical Disk Action: Change the media. Run diagnostics
on the changed media in System Verification
mode. If the errors do not reoccur, replace
the media; otherwise, run the drive
cleaning procedures if applicable, and
rerun diagnostics. If the errors reoccur,
or the drive does not support cleaning
procedures, use Chapter 12. "MAP 0210:
General Problem Resolution".

789-207

789

Description: A hardware error occurred.


Action: Change the media. Run diagnostics
Optical Disk on the changed media in System Verification
mode. If the errors do not reoccur, replace
the media; otherwise, run the drive
cleaning procedures if applicable, and
rerun diagnostics. If the errors reoccur,
or the drive does not support cleaning
procedures, use Chapter 12. "MAP 0210:
General Problem Resolution".

789-208

789

Description: The Mode Sense command failed.


Optical Disk Action: Change the media. Run diagnostics
on the changed media in System Verification
mode. If the errors do not reoccur, replace
the media; otherwise, run the drive
cleaning procedures if applicable, and
rerun diagnostics. If the errors reoccur,
or the drive does not support cleaning
procedures, use Chapter 12. "MAP 0210:
General Problem Resolution".

789-209

789

Description: The Mode Select command failed.


Optical Disk Action: Change the media. Run diagnostics
on the changed media in System Verification
mode. If the errors do not reoccur, replace
the media; otherwise, run the drive
cleaning procedures if applicable, and
rerun diagnostics. If the errors reoccur,
or the drive does not support cleaning
procedures, use Chapter 12. "MAP 0210:
General Problem Resolution".

789-300
789-400

D
D

789
789

open in browser PRO version

Description: A SCSI reservation conflict has occurred.software


Description: A SCSI command time out has occurred.Cables software

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

789-401
789-402

D
D

Optical Disk
Optical Disk

Description: An unknown error has occurred.


Description: Unit attention condition has occurred.software

789-600

Optical Disk

Description: ELA indicates that the spare


sectors on the disk are exhausted.
Action: Backup the media and replace it.
Note: Use the time when the error occurred
and the "Spare Sector Availability" service
aid to identify the disk that has the error.

789-700

789

789-701

Optical Disk
789

789-702

789
B88
Cables

790-101
790-102
790-103
790-104
790-105
790-106
790-107
790-108
790-109
790-121
790-122
790-124
790-125
790-126
790-150
790-151
790-223

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

790
790
790
790
790
790
790
790
790
790
790
790
790
790
B08
B09
790

open in browser PRO version

Description: The ELA indicates an equipment error.


Optical Disk Action: Run diagnostics in System
Verification mode to isolate the problem.
If errors are reported, use Chapter 12.
"MAP 0210: General Problem Resolution";
otherwise, the error is due to faulty
media. Backup the media and then replace it.
Note: Use the time when the error occurred
to identify the faulty media.
Description: ELA indicates an
irrecoverable data error.
Action: Run diagnostics in System
Verification mode to isolate the problem.
If errors are reported, use Chapter 12.
"MAP 0210: General Problem Resolution";
otherwise, the error is due to faulty
media. Backup the media and then replace it.
Note: Use the time when the error occurred
to identify the faulty media.
Description: ELA indicates that the
adapter detected an error.
Action: Use the 7209 Installation and
Service Guide. If the unit checks out to be
good, use Chapter 12. "MAP 0210: General
Problem Resolution".
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

Configuration Register Test failure


I/O test failure
Adapter initialization test failure
Internal wrap test failure
Internal wrap test failure
External wrap (10Mbps) test failure
Internal wrap test failure
External wrap (100Mbps) test failure
External wrap (10Mbps) test failure
Configuration register test failure
I/O register test failure
Internal loopback test failure
Internal loopback test failure
External loopback test failure
10Base-T transceiver test failure
10Base-2 transceiver test failure
Device configuration failure software

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

790-223
790-224
790-225
790-250
790-251

D
D
D
D
D

790
B08
B09
B08
B09

Description:
Description:
Description:
Description:
Description:

790-701

790

Description: Error Log Analysis indicates


that the adapter is not responding to
initialization commands.

790-702

790

Description: Error Log Analysis indicates


that the device driver has detected a PIO
error which it was unable to correct.

790-703

790

Description: Error Log Analysis indicates


that the adapter has been shutdown due to
an unrecoverable error.

790-704

790

Description: Error Log Analysis indicates


a problem with EEPROM on the adapter.

790-720

790

Description: Error log analysis indicates


a hardware problem
software

791-098
791-099
791-102
791-104
791-105
791-106
791-108
791-110
791-112
791-114

J
J
D
D
D
D
D
D
D
D

791-116

791-117
791-118
791-120
791-122
791-124

D
D
D
D
D

791
791
791
791
791

Description:
Description:
Description:
Description:
Description:

791-126

791

Description: A software error was caused


by a hardware failure.

791-128

791

Description: The error log analysis


indicates a hardware failure.

791-129

791
791
791
791
791
791
791
791
791
791

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

Device configuration failure software


10 Base-T transceiver test failure
10 Base-2 transceiver test failure 790
10 Base-T transceiver test failure
10 Base-2 transceiver test failure

The disk drive indicates an error. B88


The disk drive not found.
An unrecoverable media error occurred.
The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

D50

open in browser PRO version

A
A
A
A
A

write protect error occurred.


SCSI command time-out occurred.
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error occurred.

Description: Error log analysis indicates

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

a SCSI bus problem.


791-130

791

Description: Error log analysis indicates


a problem reported by the disk drive's self
monitoring function.

791-132
791-134
791-135
791-136

D
D
D
D

791
B88
791
791

Description:
Description:
Description:
Description:

791-137

791

Description: Unit attention condition has


occurred on the Send Diagnostic command.

792-098
792-099
792-102
792-104
792-105
792-106
792-108
792-110
792-112
792-114

J
J
D
D
D
D
D
D
D
D

792
792
792
792
792
792
792
792
792
792

792-116

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

A disk drive hardware error occurred.


The adapter failed to configure. software
The device failed to configure. software
The certify operation failed.

The disk drive indicates an error.


The disk drive not found.
An unrecoverable media error occurred.
The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

792-117
792-118
792-120
792-122
792-124

D
D
D
D
D

792
792
792
792
792

Description:
Description:
Description:
Description:
Description:

792-126

792

Description: A software error was caused


by a hardware failure.

792-128

792

Description: The error log analysis


indicates a hardware failure.

792-129

D50

Description: Error log analysis indicates


a SCSI bus problem.

792-130

792

Description: Error log analysis indicates


a problem reported by the disk drive's self
monitoring function.

792-132
792-134
792-135
792-136

D
D
D
D

792
B88
792
792

open in browser PRO version

Description:
Description:
Description:
Description:

A
A
A
A
A

write protect error occurred.


SCSI command time-out occurred.
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error occurred.

A disk drive hardware error occurred.


The adapter failed to configure.software
The device failed to configure. software
The certify operation failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

792-136

792

Description: The certify operation failed.

792-137

792

Description: Unit attention condition has


occurred on the Send Diagnostic command.

793-098
793-099
793-102
793-104
793-105
793-106
793-108
793-110
793-112
793-114

J
J
D
D
D
D
D
D
D
D

793
793
793
793
793
793
793
793
793
793

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

793-116

793-117
793-118
793-120
793-122
793-124
793-126

D
D
D
D
D
D

793
793
793
793
793
793

Description:
Description:
Description:
Description:
Description:
Description:

793-128

793

Description: The error log analysis


indicates a hardware failure.

793-129

D50

Description: Error log analysis indicates


a SCSI bus problem.

793-130

793

Description: Error log analysis indicates


a problem reported by the disk drive's self
monitoring function.

The disk drive indicates an error.


The disk drive not found.
An unrecoverable media error occurred.
The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.
A
A
A
A
A
A

write protect error occurred.


SCSI command time-out occurred.
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error occurred.
software error was caused by hardware failure.

793-132
793-134
793-135
793-136

D
D
D
D

793
B88
793
793

Description:
Description:
Description:
Description:

793-137

793

Description: Unit attention condition has


occurred on the Send Diagnostic command.

795
795
795
795
795
795
795

Description:
Description:
Description:
Description:
Description:
Description:
Description:

795-201
795-202
795-203
795-204
795-205
795-206
795-207

D
D
D
D
D
D
D

open in browser PRO version

A disk drive hardware error occurred.


The adapter failed to configure.software
The device failed to configure.software
The certify operation failed.

Config register test failure


PROM check test failure
Timer and IRQ test failure
Adapter RAM check failure
ASIC test failure
High memory (ISA) test failure
RAM check via DMA test failure

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

795-208
795-209
795-210
795-211
795-212
795-213
795-214
795-215

D
D
D
D
D
D
D
D

795
795
795
795
795
795
795
795

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

795-216

795

Description: FORMAC loopback with master


access test failure

795-217
795-218
795-219
795-301
795-302
795-303
795-304

D
D
D
D
D
D
D

795
795
795
795
795
795
795

Description:
Description:
Description:
Description:
Description:
Description:
Description:

795-700

795

Description: Error log analysis indicates


hardware failure

799-101
799-102
799-201
799-202
799-203
799-204
799-205
799-206
799-207
799-301
799-302
799-303
799-304
799-305

D
D
D
D
D
D
D
D
D
D
D
D
D
D

2C3
2C3
799
799
799
2C3
2C3
2C3
2C3
799
799
799
2C3
2C3

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

799-700

799

Description: Error log analysis indicates


a hardware problem software

7C1-101
7C1-102
7C1-103
7C1-107
7C1-108
7C1-109
7C1-117

D
D
D
D
D
D
D

7C1
7C1
7C1
7C1
7C1
7C1
D97

Description:
Description:
Description:
Description:
Description:
Description:
Description:

801-101

to
801-102

open in browser PRO version

FORMAC register test failure


PLC1 test failure
PLC2 test failure
FORMAC Ring_Op test failure
Send long frame test failure
Restricted Token Monitor test failure
Receive queue handling test failure
FORMAC loopback test failure

DMA measurement test failure


Special test failure
Bypass test failure
PLC1 FDDI external wrap failure
PLC2 FDDI external wrap failure
Send long frame FDDI external wrap failure
FORMAC loopback external wrap failure

External
External
Internal
External
External
External
External
External
External
Internal
External
External
External
External

wrap test failed on


wrap test failed on
adapter test failed
wrap test failed on
wrap test failed on
wrap test failed on
wrap test failed on
wrap test failed on
wrap test failed on
adapter test failed
wrap test failed on
wrap test failed on
wrap test failed on
wrap test failed on

port 0
port 1
port
port
port
port
port
port

0
1
0
1
0
1

port
port
port
port

0
1
0
1

Audio Subsystem failed software


CS4232 Failed
Clock control failed
SoundBlaster interface failed
Loop back failed
CODEC ID invalid
Internal speaker failed

Description: The diagnostics did not


detect an installed resource.
Action: Ensure supplemental diskettes have
been read, if applicable, then use Chapter
18. "MAP 0290: Missing Resource Problem
Resolution".

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

Resolution".
802-787

787

802-78C

802-xxx

xxx

803-xxx

Use the xxx

804-111
804-112
804-113
804-121
804-122
804-123
804-125
804-126
804-127
804-128
804-129
804-150
804-151
804-152
804-162
804-171
804-172
804-173
804-175
804-198
804-199

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

804
804
804
804
804
804
804
804
804
804
804
Media
804
804
804
804
804
804
804
804
804

Description: The diagnostics did not


detect an installed resource.
Description: A system bus problem exists.
Action: Use Chapter 11. "MAP 0080 System
Bus Problem Isolation".

open in browser PRO version

Description: The diagnostics did not


detect an installed resource.
Note: To obtain the FFC substitute the last
three digits of the SRN for xxx. (The
substituted xxx is the FFC.)
Description: An error occurred while
running the diagnostics.(See note number
Action: Run nondisk-based diagnostics where
possible. If this SRN was generated from in Action
the nondisk-based diagnostic package, or it
is not possible to use the nondisk-based column.)
package, go to Chapter 15. "MAP 0250:
Unexpected System Halts During
Diagnostics". If the problem occurs only
from disk-or server-based diagnostics,
suspect a software problem.
Notes:
1. If your 803-xxx SRN is listed in
this section, use the procedure
for that SRN instead of this one.
2. If the xxx FFC is not listed in
the FFC list, Use MAP 1540 to
determine the failing FRU.
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

Unable to reserve device.


Unable to do configuration.
Unable to open the device driver.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
A media error was detected.
A command timeout was detected.
A command reservation conflict was detected.
The CD-ROM drive indicates an error.
Unable to reserve device.
Unable to do configuration.
Unable to open device driver.
The CD-ROM drive indicates an error.
Undefined error detected.
Undefined error detected.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

804-211
804-281
804-301
804-302

D
D
G
G

804
804
804
804

804-xxx

Use the
xxx

Description:
Description:
Description:
Description:

The LED test failed.


No tone during audio test.
Errors found during ELA.
Errors found during ELA.

Description: An unexpected halt occurred


while running the diagnostics.
Note: If your 804-xxx SRN is listed in this number
section, use the procedure for that SRN
instead of this one.
Action: Use Chapter 15. "MAP 0250:
Unexpected System Halts During
Diagnostics".

805-110

D67

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-111

D83

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-120

D68

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-121

D84

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-130

D69

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-131

D85

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-140

D70

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-141

D86

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-150

E11

Description: Error log analysis indicates

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

805-150

E11

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-151

E14

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-210

D71

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-211

D87

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-220

D72

Description: Error log analysis indicates


a machine check due to uncorrectable memory
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

error.

805-221

D88

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-230

D73

Description: Error log analysis indicates


a machine check due to uncorrectable memory
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

error.

805-231

D89

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-240

D74

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-241

D90

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-250

E12

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

805-251

E15

Description: Error log analysis indicates


a machine check due to uncorrectable memory
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

error.

805-310

D75

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-311

D91

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-320

D76

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-321

D92

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-331

D93

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-340

D78

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-341

D94

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-350

E13

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-351

E16

Description: Error log analysis indicates


a machine check due to uncorrectable memory error.
Action: Use Chapter 14. "MAP 0240: Memory
Problem Resolution".

805-600

open in browser PRO version

Description: Error log analysis indicates


a machine check due to uncorrectable memory
error or unsupported memory.
Action: Examine the memory modules and
determine if they are supported types. If

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

determine if they are supported types. If


the modules are supported, then replace the
appropriate memory module(s). Use Chapter
14. "MAP 0240: Memory Problem Resolution".
805-601

210

Description: Error log analysis indicates


a machine check due to CPU internal cache error.

805-602

214

Description: Error log analysis indicates


a machine check due to CPU address/data bus
parity error.

D01
805-603

210

Description: Error log analysis indicates


a machine check due to CPU bus transfer error.

805-604

210

Description: Error log analysis indicates


a machine check due to CPU address/data bus parity error.

805-605

210

Description: Error log analysis indicates


a machine check due to CPU bus transfererror.

805-606

214

Description: Error log analysis indicates


a machine check due to memory controller internal error.

805-607

210

Description: Error log analysis indicates


a machine check due to memory address error.

805-608

214

Description: Error log analysis indicates


a machine check due to a Flash ROM error.

805-609

D01

Description: Error log analysis indicates


a machine check due to a L2 parity error.

805-610

Description: Error log analysis indicates


a machine check due to ISA device error,
but the device could not be identified.
Action: Run diagnostics on the ISA devices.

805-611

Description: Error log analysis indicates


a machine check due to EISA/ISA bus time
out error, but the device could not be identified.
Action: Run diagnostics on the ISA devices.
If multiple devices fail, use FFC 295.

805-612

214

805-616

software

805-617

Description: Error log analysis indicates


a machine check of unknown origin.
Action: If the problem is persistent, use
MAP 1540.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

Description: Error log analysis indicates


a machine check due to an Illegal L2 copyback operation.
Description: Error log analysis indicates
a machine check due to software.

pdfcrowd.com

805-618

Description: Error log analysis indicates


multiple instances of machine check of
unknown origin.
Action: If the problem is persistent, use
MAP 1540.

805-619

221

Description: Error log analysis indicates


a machine check due to an unidentified
source on the I/O subsystem. Action: Use
Chapter 12. "MAP 0210: General Problem
Resolution".

805-621

292

Description: Error log analysis indicates


a machine check due to Integrated PCI
device does not respond.

805-622

293

Description: Error log analysis indicates


a machine check due to Integrated PCI
device does not respond.

805-623

294

Description: Error log analysis indicates


a machine check due to Integrated PCI
device does not respond.

805-624

295

Description: Error log analysis indicates


a machine check due to Integrated PCI
device does not respond.

805-625

868

Description: Error log analysis indicates


a machine check due to Integrated PCI
device does not respond.

805-631

292

Description: Error log analysis indicates


a machine check due to Internal error from
PCI device.

805-632

293

Description: Error log analysis indicates


a machine check due to Internal error from
PCI device.

805-633

294

Description: Error log analysis indicates


a machine check due to Internal error from
PCI device.

805-634

295

Description: Error log analysis indicates


a machine check due to Internal error from
PCI device.

805-635

868

Description: Error log analysis indicates


a machine check due to Internal error from
PCI device.

805-640

2E8

Description: Error log analysis indicates


a machine check due to a system bus error.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

805-641

2E8

Description: Error log analysis indicates


a machine check due to a processor bus error.

805-642

2E8

Description: Error log analysis indicates


a machine check due to a directory parity error.

805-643

2E8

Description: Error log analysis indicates


a machine check due to a cache paradox.

805-644

2E8

Description: Error log analysis indicates


a machine check due to an internal error.

805-645

2E8

Description: Error log analysis indicates


a machine check due to a detected L2 hit signal.

805-646

2E8

Description: Error log analysis indicates


a machine check due to an address/data bus parity error.

805-649

software

805-801

166
221

Description: Slow fan or defective thermal sensor.


Action: 1) Check spacing around system
enclosure, 2) check for obstructions to
cooling air flow, 3) check that all fans
can rotate freely, and spin with power
applied. If reasons 1, 2 and 3 can be ruled
out, then replace the listed FRUs.

805-802

152
210

Description: Over/Under voltage condition.


Action: Check AC line voltage per the Power
MAP in your service guide. If the AC line
voltage is correct replace the listed FRUs.

805-803

2E1

Description: System shutdown due to


non-critical over temperature condition.
Action: 1) check for obstructions to
cooling air flow, 2) check for accumulated
dust on the CPU and planar. If reasons 1
and 2 can be ruled out, then replace the listed FRUs.

210

805-804

166
2E1

805-805

152

open in browser PRO version

Description: Error log analysis indicates


a machine check due to a disabled I/O address space.
Action: Run Standalone Diagnostics on all
devices. Use any SRN reported. If no other
SRN is reported, suspect a software problem.

Description: System shutdown due to


critical over temperature condition.
Action: Check to ensure fans are connected.
If fans are connected, then replace the listed FRUs.
Description: System shutdown due to loss of AC power.
Action: Check the voltage range switch, if
present, on the power supply and ensure
that it is set to match the AC input
voltage. If the range switch is set

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

correctly or is not present refer to "MAP


1520: Power" in the Service Guide for your system.
805-807

166

Description: System shutdown due to an inoperative fan.


Action: Check to ensure fans are connected.
If fans are connected replace the listed FRU.

805-811

166

Description: Slow fan or defective thermal sensor.


Action:
1. Check spacing around system enclosure
2. Check for obstructions to cooling air flow
3. Check that all fans rotate freely, and
spin when power is applied.
If reasons 1, 2, and 3 can be ruled out,
then replace the listed FRUs.

805-812

152
210

Description: Over/Under voltage condition.


Action: Check the AC line voltage per the
Power MAP in your service guide. If the AC
line voltage is correct replace the listed FRUs.

805-813

2E1

Description: System shutdown due to


non-critical over temperature condition.
Action:
1. Check for obstructions to cooling air flow.
2. Check for accumulated dust on the CPU and planar.
If reasons 1 and 2 can be ruled out, then
replace the listed FRUs.

210

806-001
thru
806-017

806

GXT800P Graphics Adapter

806-018
806-100

D
D

806
806

GXT800P Graphics Adapter Monitor/Display Cable


Description: GXT800P Graphics Adapter

806-505

806

Description: GXT800P Graphics Adapter


GXT800P Base Memory in slot 0, 1, 2, 3, or 4

806-515

806

Description: GXT800P Graphics Adapter


GXT800P Base and Texture Memory in slot 0,
1, 2, 3, or 4

806-619

221

Description: Error log analysis indicates


a machine check due to an unidentified
source on the I/O subsystem.

806-700
806-701
806-702
806-703
806-704
806-710
806-711
806-712

D
D
D
D
D
D
D
D

298
298
298
298
298
297
297
297

GXT800P
GXT800P
GXT800P
GXT800P
GXT800P
GXT800P
GXT800P
GXT800P

open in browser PRO version

Base
Base
Base
Base
Base
Base
Base
Base

Memory in slot 0
Memory in slot 1
Memory in slot 2
Memory in slot 3
Memory in slot 4
and Texture Memory in slot 0
and Texture Memory in slot 1
and Texture Memory in slot 2

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

806-712
806-713
806-714
806-e00
806-e01
806-e02
806-e03
806-e04
806-e10
806-e11
806-e12
806-e13
806-e14
807-201
807-202
807-203
807-204
807-205
814-112
814-113
814-114
815-100
815-101
815-102
815-200
816-140
817-123
817-124
817-210
817-211
817-212
817-213
817-215
817-217
821-111
821-220
821-221
821-230

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

297
297
297
298
298
298
298
298
297
297
297
297
297
199
199
199
152
152
814
221
814
815
815
815
815
165
817
817
817
817
151
817
817
817
821
B10
821
221

GXT800P Base
GXT800P Base
GXT800P Base
GXT800P Base
GXT800P Base
GXT800P Base
GXT800P Base
GXT800P Base
GXT800P Base
GXT800P Base
GXT800P Base
GXT800P Base
GXT800P Base
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

821-240

821

Description: The error log analysis


indicates hardware failure.

821-241

221

Description: The error log analysis


indicates hardware failure.

821-242

921

Description: The error log analysis


indicates hardware failure.

821-243

922

Description: The error log analysis


indicates hardware failure.

821-244

923

Description: The error log analysis


indicates hardware failure.

821-310

821

Description: Standard Keyboard Adapter

open in browser PRO version

and Texture Memory in slot 2


and Texture Memory in slot 3
and Texture Memory in slot 4
Memory in slot 0
Memory in slot 1
Memory in slot 2
Memory in slot 3
Memory in slot 4
and Texture Memory in slot 0
and Texture Memory in slot 1
and Texture Memory in slot 2
and Texture Memory in slot 3
and Texture Memory in slot 4
Device configuration error
Enclosure failed to open
Enclosure failed to return inquiry data
Redundant power supply or fan failure
Redundant power supply or fan failure
The NVRAM test failed.
The VPD test failed.
I/O Card NVRAM test failed.
The floating-point processor test failed.
Floating point processor failed.
Floating point processor failed.
Floating point processor failed.
The four-digit display test failed.
The I/O planar time-of-day clock test failed.
Time of day RAM test failed.
The time-of-day clock is at POR.
Time of day POR test failed.
The battery is low.
The real-time clock is not running.
Time of day clock not running test failed.
Time of day clock not running.
Unexpected results from the test.
Keyboard adapter fuse failed.
The keyboard adapter test failed.
Software error caused by hardware failure.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

to
821-331

failed.

821-332

821

Description: Cannot open device.software

821-333
to
821-334

821

Description: Keyboard/tablet adapter failed.

821-921
821-922
821-923

D
D
D

921
922
923

Description: The keyboard adapter control logic failed.


Description: The keyboard adapter control logic failed.
Description: The keyboard adapter control logic failed.

823-111
to
823-112

823
925

Description: Standard Mouse adapter failed.

823-113

B10

Description: The mouse adapter fuse failed.

823-121
to
823-122

823

Description: Built-In mouse adapter problems.

823-130

221

Description: Software error caused by


hardware failure.

823-131

823

Description: Unable to put mouse adapter


into nonblock mode.

823-132
to
823-133

823

Description: Built-In mouse adapter problem.

823-134

823

Description: Cannot open device.

823-140

823

Description: The error log analysis


indicates hardware failure.

823-141

823

Description: Unable to place mouse adapter


in block mode.

823-142

823

Description: Unable to place mouse adapter


in block mode.

823-220
824-220
824-331

D
D
D

B10
824
824

Description: The mouse adapter fuse failed.


Description: The tablet adapter fuse failed.
Description: An unexpected error occurred.

824-332

824
227

Description: The enable/disable device test failed.


Note:Ensure that the wrap plug was not
attached when the test was run. If the wrap
plug was attached, remove it, and rerun the test.

824-333
824-334

D
D

824
B10

Description: The internal wrap test failed.


Description: The tablet adapter fuse failed.824

open in browser PRO version

software

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

824-334
824-441
824-442
824-450

D
D
D
D

B10
824
824
227

Description:
Description:
Description:
Description:

824-461

227

Description: The error log analysis


indicates a hardware failure.

824-511
824-512
824-522
824-523
824-524

D
D
D
D
D

824
824
B10
824
824

Description:
Description:
Description:
Description:
Description:

826-111

221

Description: Cannot run the test because


the device driver detected a hardware error.

826-112

221

Description: Unable to determine the type


of adapter from the VPD.

826-113

826

Description: The VPD verification test failed.

826-114

826

Description: The register verification test failed.

826-121

221

Description: Cannot run the test because


the device driver detected a hardware error.

826-122

221

Description: The data-wrap communications test failed.

826-123

221

Description: The modem control line test failed.

826-131

221

Description: Cannot run the test because


the device driver detected a hardware error.

826-132

221

Description: The data wrap communications test failed.

826-133

221

Description: The modem control line test failed.

826-161

252

Description: Cannot run the test because


the device driver detected a hardware error.

826-162

252

Description: The data wrap communications test failed.

826-163

252

Description: The modem control line test failed.

826-171

259

Description: Cannot run the test because


the device driver detected a hardware error.

826-172

259

Description: The data wrap communications


test failed.

826-173

259

Description: The modem control line test failed.

826-181

261

Description: Cannot run the test because


the device driver detected a hardware error.

open in browser PRO version

The tablet adapter fuse failed.824


An unexpected error occurred.
The wrap test failed.
Software error caused by hardware failure.

An unexpected error occurred.


Tablet adapter reset test failed.
Adapter fuse failure.
Device cannot be configured.
Cannot open device. software

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

826-182

261

Description: The data wrap communications test failed.

826-183

261

Description: The modem control line test failed.

826-271

826

Description: Cannot run the test because


the device driver detected a hardware error.

826-272
826-273

D
D

826
826

Description: The data wrap communications test failed.


Description: The modem control line test failed.

826-281

826

Description: Cannot run the test because


the device driver detected a hardware error.

826-282
826-283

D
D

826
826

Description: The data wrap communications test failed.


Description: The modem control line test failed.

826-321

826

Description: Cannot run the test because


the device driver detected a hardware error.

826-322

826

Description: The data wrap communications test failed.

826-323

826

Description: The modem control line test failed.

826-331

826

Description: Cannot run the test because


the device driver detected a hardware error.

826-332
826-333

D
D

826
826

Description: The data wrap communications test failed.


Description: The modem control line test failed.

826-371

826

Description: Cannot run the test because


the device driver detected a hardware error.

826-372
826-373

D
D

826
826

Description: The data wrap communications test failed.


Description: The modem control line test failed.

826-381

826

Description: Could not do the test because


the device driver detected a hardware error.

826-382
826-383

D
D

826
826

Description: The data wrap communication test failed.


Description: The modem control line test failed.

826-481

D56

Description: Could not do the test because


the device driver detected a hardware error.

826-482
826-483

D
D

D56
D56

Description: The data wrap communication test failed.


Description: The modem control line test failed.

826-581

826

Description: Could not do the test because


the device driver detected a hardware error.

826-582
826-583

D
D

826
826

Description: The data wrap communication test failed.


Description: The modem control line test failed.

826-901

software

open in browser PRO version

Description: An unexpected error occurred

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

826-901
to
826-920

software

826-921

826

826-922
to
826-924

software

826-925

826

826-926
to
826-943

software

827-112

221

Description: The parallel port data


register write/read test failed.

827-121

827

Description: Cannot run the test because


the device driver detected a hardware error.

827-122

827

Description: The parallel port data


register write/read test failed.

827-123

827

Description: The parallel port control


register write/read test failed.

827-124

827

Description: The parallel port data


register read test failed.

827-125

827

Description: The parallel port control


register read test failed.

827-126

827

Description: The parallel port control


register read test failed.

open in browser PRO version

Description: An unexpected error occurred


that can be attributed to software or hardware.
Action: Run diagnostics from a source other
than from the disk or a network. If the
same error occurs or if the original SRN
was not obtained from disk or a network
based diagnostics, use Chapter 12. "MAP
0210: General Problem Resolution" with a
FFC of 826; otherwise, suspect a software problem.
Description: The adapter failed to configure software
Description: An unexpected error occurred
that can be attributed to software or hardware.
Action: Run diagnostics from a source other
than from the disk or a network. If the
same error occurs or if the original SRN
was not obtained from disk or a network
based diagnostics, use Chapter 12. "MAP
0210: General Problem Resolution" with a
FFC of 826; otherwise, suspect a software problem.
Description: The adapter failed to configure software
Description: An unexpected error occurred
that can be attributed to software or hardware.
Action: Run diagnostics from a source other
than from the disk or a network. If the
same error occurs or if the original SRN
was not obtained from disk or a network
based diagnostics, use Chapter 12. "MAP
0210: General Problem Resolution" with a
FFC of 826; otherwise, suspect a software problem.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

827-131

827

Description: Cannot run the test because


the device driver detected a hardware error.

827-132

827

Description: The control port register


direction bit (write) test with BIDI
enabled failed.

827-133

827

Description: The control port register


direction bit (read) test with BIDI enabled failed.

827-141

827

Description: Cannot run the test because


the device driver detected a hardware error.

827-142

827

Description: The parallel port control


register write/read test with BIDI
enabled failed.

827-151

221

Description: Cannot run the test because


the device driver detected a hardware error.

827-152

827

Description: The parallel port status


register read test failed.

827-161

827

Description: Cannot run the test because


the device driver detected a hardware error.

827-162

221

Description: The parallel port interrupt


test failed.

827-163

221

Description: The parallel port interrupt


test failed.

827-201

827

Description: The extend control register


of the parallel port failed a read/write test.

827-202

827

Description: Input/output to the FIFO


(without interrupts) failed.

827-203

827

Description: Input/output to the FIFO


(with interrupts) failed.

827-204

827

Description: Direct memory access to the


FIFO failed.

828-501
82C-102
82C-104

D
D
D

828
82C
82C

Description: The diskette adapter test failed.


Description: Adapter test failed.
Description: Display test failed.

830-111

830

Description: Could not do the test


because the device driver detected a hardware error.

830-114

830

Description: The register verification test failed.

830-121

830

open in browser PRO version

Description: Could not do the test


Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

830-121

830
227

Description: Could not do the test


because the device driver detected a
hardware problem.

830-122
830-123
830-124

D
D
D

830
830
830

Description: The data wrap communication test failed.


Description: The modem control line test failed.
Description: The memory test failed.

830-151

B54
830

Description: Could not do the test


because the device driver detected a
hardware error.

830-152
830-153

D
D

B54
D54

Description: The data wrap communication test failed.


Description: The modem control line test failed.

830-171

259

Description: Could not run the test


because the device driver detected a hardware error.

830-172
830-173

D
D

259
259

The data wrap communication test failed.


Description: The modem control line test failed.

830-181

261

Description: Could not do the test


because the device driver detected a
hardware error.

830-182

261

Description: The data wrap communication


test failed.

830-183

261

Description: Interposer Wrap test failed.

830-251

830

Description: Could not perform because


the device driver detected a hardware error.

830-252
830-253

D
D

830
830

Description: The data wrap communication test failed.


Description: The modem control line test failed.

830-271

830

Description: Could not perform because


the device driver detected a hardware error.

830-272
830-273

D
D

830
830

Description: The data wrap communication test failed.


Description: The modem control line test failed

830-281

830

Could not perform the test because the


device driver detected a hardware error.

830-282
830-283

D
D

830
830

Description: The data wrap communication test failed.


Description: The modem control line test failed.

830-481

B54

Description: Could not do the test


because the device driver detected a
hardware error.

830-482

B54

Description: The data wrap communication test failed.

830-483

B54

Description: Async Cable Wrap Test failed.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

830-901

to
830-9 20

software
830

830-921

830-922

to
830-924

830
software
830

830-925

830-926

to
830-943

830
software
830

Description: An unexpected error


occurred that can be attributed to
software or hardware.
Action: Run diagnostics from a source
other than from the disk or a network. If
the same error occurs or if the original
SRN was not obtained from disk or a
network based diagnostics, use Chapter
12. "MAP 0210: General Problem
Resolution" with a FFC of 830; otherwise,
suspect a software problem.
Description: The adapter failed to
configure software
Description: An unexpected error
occurred that can be attributed to
software or hardware.
Action: Run diagnostics from a source
other than from the disk or a network. If
the same error occurs or if the original
SRN was not obtained from disk or a
network based diagnostics, use Chapter
12. "MAP 0210: General Problem
Resolution" with a FFC of 830; otherwise,
suspect a software problem.
Description: The adapter failed to
configure software
Description: An unexpected error
occurred that can be attributed to
software or hardware.
Action: Run diagnostics from a source
other than from the disk or a network. If
the same error occurs or if the original
SRN was not obtained from disk or a
network based diagnostics, use Chapter
12. "MAP 0210: General Problem
Resolution" with a FFC of 830; otherwise,
suspect a software problem.

831-111

221

Description: Cannot run the test because


the device driver detected a hardware error.

831-112

221

Description: Unable to determine the


type of adapter from the VPD.

831-113
831-114

D
D

831
831

Description: The VPD verification test failed.


Description: The register verification test failed.

831-121

221

Description: Cannot run the test because


the device driver detected a hardware error.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

831-122

221

Description: The data wrap


communications test failed.

831-123

221

Description: The modem control line test failed.

831-131

221

Description: Cannot run the test because


the device driver detected a hardware error.

831-132

221

Description: The data wrap


communications test failed.

831-133

221

Description: The modem control line test failed.

831-161

252

Description: Cannot run the test because


the device driver detected a hardware error.

831-162

252

Description: The data wrap


communications test failed.

831-163

252

Description: The modem control line test failed.

831-164

221

Description: Cannot run the test because


the device driver detected a hardware error.

831-165

221

Description: The data wrap


communications test failed.

831-166

221

Description: The modem control line test failed.

831-171

259

Description: Cannot run the test because


the device driver detected a hardware error.

831-172

259

Description: The data wrap


communications test failed.

831-173

259

Description: The modem control line test failed.

831-181

261

Description: Cannot run the test because


the device driver detected a hardware error.

831-182

261

Description: The data wrap


communications test failed.

831-183

261

Description: The modem control line test failed.

831-271

831

Description: Cannot run the test because


the device driver detected a hardware error.

831-272
831-273

D
D

831
831

Description: The data wrap communication test failed.


Description: The modem control line test failed.

831-281

831

Description: Cannot run the test because


the device driver detected a hardware error.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

831-282
831-283

D
D

831
831

Description: The data wrap communications test failed.


Description: The modem control line test failed.

831-321

831

Description: Cannot run the test because


the device driver detected a hardware error.

831-322

831

Description: The data wrap


communications test failed.

831-323

831

Description: The modem control line test failed.

831-331

831

Description: Cannot run the test because


the device driver detected a hardware error.

831-332

831

Description: The data wrap


communications test failed.

831-333

831

Description: The modem control line test failed.

831-371

831

Description: Cannot run the test because


the device driver detected a hardware error.

831-372

831

Description: The data wrap


communications test failed.

831-373

831

Description: The modem control line test failed.

831-381

831

Description: Cannot run the test because


the device driver detected a hardware error.

831-382

831

Description: The data wrap


communications test failed.

831-383

831

Description: The modem control line test failed.

831-481

D56

Description: Could not do the test


because the device driver detected a
hardware error.

831-482
831-483

D
D

D56
D56

Description: The data wrap communication test failed.


Description: The modem control line test failed.

831-581

831

Description: Could not do the test


because the device driver detected a
hardware error.

831-582

831

Description: The data wrap communication


test failed.

831-583

831

Description: The modem control line test failed.

831-901

to
831-920

software
831

open in browser PRO version

Description: An unexpected error


occurred that can be attributed to
software or hardware.
Action: Run diagnostics from a source

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

831-920

Action: Run diagnostics from a source


other than from the disk or a network. If
the same error occurs or if the original
SRN was not obtained from disk or a
network based diagnostics, use Chapter
12. "MAP 0210: General Problem
Resolution" with a FFC of 831; otherwise,
suspect a software problem.

831-921

831-922

831
software

to
831-924

831

831-925

831-926

831
software

to
831-943

831

Description: The adapter failed to configure software


Description: An unexpected error
occurred that can be attributed to
software or hardware.
Action: Run diagnostics from a source
other than from the disk or a network. If
the same error occurs or if the original
SRN was not obtained from disk or a
network based diagnostics, use Chapter
12. "MAP 0210: General Problem
Resolution" with a FFC of 831; otherwise,
suspect a software problem.
Description: The adapter failed to configure software
Description: An unexpected error
occurred that can be attributed to
software or hardware.
Action: Run diagnostics from a source
other than from the disk or a network. If
the same error occurs or if the original
SRN was not obtained from disk or a
network based diagnostics, use Chapter
12. "MAP 0210: General Problem
Resolution" with a FFC of 831; otherwise,
suspect a software problem.

832-xxx

xxx

I/O Device Internal Error


Note: xxx represents the last 3 digits of
the SRN.

833-xxx

xxx

Description: PCI device address parity


error, PCI device data parity error, or
PCI device abort error. The diagnostics
screen indicates the actual error.
Note: xxx represents the last 3 digits of
the SRN.

296

836-101

836

Description: Cannot run the test


because the device driver detected a
hardware error.

836-111

836

Description: Cannot run test because


the device driver detected a hardware error.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

836-112

836

Description: Unable to determine the


type of adapter from the VPD.

836-113
836-114
836-115
836-116
836-117
836-118
836-119

D
D
D
D
D
D
F

836
836
836
B54
684
837
836

Description:
Description:
Description:
Description:
Description:
Description:
Description:

836-151

837

Description: Cannot run the test


because the device driver detected a hardware error.

836-152
836-153

D
D

837
837

Description: The data wrap communications test failed.


Description: The modem control line test failed.

The VPD verification test failed.


The register verification test failed.
The VPD verification test failed.
The 128-port controller line test failed.
Remote Async Node test failed.
Remote async node test failed.
Sync line termination test failed.

836-154

684

Desciption: Cannot run the test because


the device driver detected a hardware error.

836-155

684

Description: The data wrap communications test failed.

836-161

C22

Description: Cannot run the test


because the device driver detected a hardware error.

836-162

C22

Description: The data wrap


communications test failed.

836-163

C22

Description: The modem control line test failed.

836-164

D06

Description: The data wrap


communication test failed.

836-171

259

Description: Cannot run the test


because the device driver detected a hardware error.

836-172

259

Description: The data wrap


communications test failed.

836-173

259

Description: The modem control line test failed.

836-174

263

Description: Cannot run the test because


the device driver detected a hardware
error while running the Printer/Terminal
cable wrap test.

836-175

263

Description: The data wrap


communications test failed while running
the Printer/Terminal cable wrap test.

836-181

261

Description: Cannot run the test


because the device driver detected a
hardware error.

836-182

261

open in browser PRO version

Description: The data wrap


Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

836-182

261

Description: The data wrap


communications test failed.

836-183

261

Description: The modem control line test failed.

836-251

836

Description: Cannot run the test


because the device driver detected a
hardware error.

836-252

836

Description: The data wrap


communications test failed.

836-253

836

Description: The modem control line test failed.

836-254

836

Description: Cannot run the test because


the device driver detected a hardware
error while running the Remote Async Node
wrap test.

836-255

836

Description: The data wrap


communications test failed while running
the Remote Async Node wrap test.

836-271

836

Description: Cannot run the test


because the device driver detected a
hardware error.

836-272

836

Description: The data wrap


communications test failed.

836-273

836

Description: The modem control line test failed.

836-274

836

Description: Cannot run the test because


the device driver detected a hardware
error while running the Printer/Terminal
cable wrap test.

836-275

836

Description: The data wrap


communications test failed while running
the Printer/Terminal cable wrap test.

836-281

836

Description: Cannot run the test


because the device driver detected a
hardware error.

836-282
836-283

D
D

836
836

Description: The data wrap communication test failed.


Description: The modem control line test failed.

836-481

D56

Description: Could not do the test


because the device driver detected a
hardware error.

836-482
836-483

D
D

D56
D56

Description: The data wrap communication test failed.


Description: The modem control line test failed.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

836-901
to
836-920

836-921

836-922
to
836-924

836-925

836-926
to
836-943

840-212

software
836

836
software
836

836
software

840
221

840-213

840
221

Description: An unexpected error


occurred that can be attributed to
software or hardware.
Action: Run diagnostics from a source
other than from the disk or a network. If
the same error occurs or if the original
SRN was not obtained from disk or a
network based diagnostics, use Chapter
12. "MAP 0210: General Problem
Resolution" with a FFC of 836; otherwise,
suspect a software problem.
Description: The adapter failed to configure software
Description: An unexpected error
occurred that can be attributed to
software or hardware.
Action: Run diagnostics from a source
other than from the disk or a network. If
the same error occurs or if the original
SRN was not obtained from disk or a
network based diagnostics, use Chapter
12. "MAP 0210: General Problem
Resolution" with a FFC of 836; otherwise,
suspect a software problem.
Description: The adapter failed to configure software
Description: An unexpected error
occurred that can be attributed to
software or hardware.
Action: Run diagnostics from a source
other than from the disk or a network. If
the same error occurs or if the original
SRN was not obtained from disk or a
network based diagnostics, use Chapter
12. "MAP 0210: General Problem
Resolution" with a FFC of 836; otherwise,
suspect a software problem.
Description: FIFO empty bit set.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".
Description: FIFO empty bit clear.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

840-214

840

Description: FIFO full bit set.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

840-215

840

Description: FIFO full bit clear.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

Problems Isolation Procedure".


840-216

840

Description: FIFO data miscompare.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

840-217

840

Description: SCSI FIFO data miscompare.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure"

840-218

840

Description: SCSI FIFO underflow.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

840-219

840

Description: SCSI parity error.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

840-220

840

Description: SCSI FIFO flags error.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

840-221

840

Description: Miscompare during the


write/read of the configuration register.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

840-222

840

Description: Error during the write/read


of the memory register.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

840-223

840

Description: Miscompare during the


write/read of the memory I/O register.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

840-224
840-225

D
D

840
840

Description: Error reading the PCI configuration register.


Description: Adapter POST failed.

840-230

D50

Description: Arbitration test failed.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure"..

840-231

D50

Description: Function could not complete.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

840-232

D50

Description: SCSI bus data miscompare.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

840-240

840

Description: No terminal power.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

840-301

840

Description: Configuration open failed


for parent bus. D50 software

840-700

840

Description: Error log analysis


indicates a PCI SCSI adapter failure.software

840-701

840

Description: Error log analysis


indicates a PCI SCSI adapter failure. software

840-702

840

Description: Error log analysis


indicates a PCI SCSI adapter failure.software

840-703

840

Description: Error log analysis


indicates a PCI SCSI adapter failure. software

840-704

840

Description: Error log analysis


indicates a PCI SCSI adapter failure. software

840-705

840

Description: Error log analysis


indicates a PCI SCSI adapter failure.software

840-800

746

Description: Error log analysis


indicates a PCI SCSI adapter PTC failure.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

840-802

840

Description: Error log analysis


indicates a PCI SCSI bus failure.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

844-XXX

844

Description: A 7135 controller problem series is indicated.


Action: Use 7135 documentation.

845-XXX

845

Description: A 7135 DASD drawer problem series


is indicated.
Action: Use 7135 documentation.

846-XXX

846

Description: A 7135 DASD drawer problem series


is indicated.
Action: Use 7135 documentation.

868-110

221

Description: The adapter diagnostic


subcommand test failed.

868-130
868-140
868-150
868-160
868-170

D
D
D
D
D

279
868
868
868
868

Description:
Description:
Description:
Description:
Description:

868-180

279

Description: The adapter command timed out. 868


Note: Check the fuse before replacing.

open in browser PRO version

The
The
The
The
The

adapter fuse test failed.


wrap test failed.
BCR registers write/read test failed.
POS registers write/read test failed.
internal/external reset test failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

868-190

221

Description: A software error was caused


by a hardware failure.

868-191

868

Description: Analysis of the error log


indicates a problem with the hardware.

868-192

221

Description: Analysis of the error log


indicates a problem with the hardware.

868-193

279

Description: Analysis of the error log


indicates a problem with the hardware.

868-194

868

Description: Analysis of the error log


indicates a problem with the hardware.

868-200
868-201
868-202
868-203
868-204
868-205
868-206

D
D
D
D
D
D
D

868
868
868
868
868
868
868

Description:
Description:
Description:
Description:
Description:
Description:
Description:

868-211

279

Description: The device failed to


configure. 868 software

868-212

221

Description: FIFO empty bit set.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

868-213

221

Description: FIFO empty bit clear.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

868-214

221

Description: FIFO full bit set.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

868-215

221

Description: FIFO full bit clear.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

868-216

221

Description: FIFO data miscompare.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

868-217

221

Description: SCSI FIFO data miscompare.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

868-218

221

Description: SCSI FIFO underflow.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

open in browser PRO version

ROM CRC error.


Adapter RAM error.
The control logic failed.
The control logic failed.
The control logic failed.
The control logic failed.
Diagnostics completed with a previous error.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

868-219

221

Description: SCSI parity error.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

868-220

221

Description: SCSI FIFO flags error.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

868-221

221

Description: Miscompare during the


write/read of the configuration register.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

868-222

221

Description: Error during the write/read


of the memory register.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

868-223

221

Description: Miscompare during the


write/read of the memory I/O register.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

868-224

221

Description: Error reading the PCI


configuration register.
Action: Use Chapter 12. "MAP 0210:
General Problem Resolution".

868-225

221

Description: POST failed.

868-230

D50

Description: Arbitration test failed.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

868-231

D50

Description: Function could not complete.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

868-232

D50

Description: SCSI bus data miscompare.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

868-240

221

Description: No terminal power.


Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

868-301

868

Description: Configuration open failed


for parent bus.
D50
software

868-700

868

Description: Error log analysis


indicates a PCI SCSI adapter failure. software

868-701

868

Description: Error log analysis


indicates a PCI SCSI adapter failure. software

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

868-702

868

Description: Error log analysis


indicates a PCI SCSI adapter failure. software

868-703

868

Description: Error log analysis


indicates a PCI SCSI adapter failure.

software

868-704

868

Description: Error log analysis


indicates a PCI SCSI adapter failure. software

868-705

868

Description: Error log analysis


indicates a PCI SCSI adapter failure.software

868-800

868

Description: Error log analysis


indicates a PCI SCSI adapter PTC failure.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

868-802

868

Description: Error log analysis


indicates a PCI SCSI bus failure.
Action: Go to Chapter 7. "MAP 0050: SCSI
Problems Isolation Procedure".

887-101
887-102
887-103
887-104
887-105
887-106
887-107
887-108
887-109
887-110
887-111
887-112
887-113
887-114
887-115
887-116
887-117
887-118
887-120
887-121
887-122
887-123
887-124
887-125
887-202
887-203
887-209
887-304
887-305
887-306
887-307

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

887
887
887
887
887
887
887
887
887
887
887
887
887
887
887
887
887
887
887
B08
B09
887
887
887
887
887
887
887
887
887
887

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

D
G
G
D
D
D
D
D
D
D

open in browser PRO version

POS register test failed.


I/O register test failed.
Local RAM test failed.
Vital Product Data (VPD)failed.
LAN coprocessor internal tests failed.
Internal loopback test failed.
External loopback test failed.
External loopback test failed.
External loopback parity tests failed.
External loopback fairness test failed.
External loopback fairness and parity tests failed.
External loopback (twisted pair) test failed.
External loopback (twisted pair) parity test failed.
Ethernet loopback (twisted pair) fairness test failed.
External loopback (twisted pair) fairness and parity tests failed.
Twisted pair wrap data failed ).
Device configuration fails.software
Device driver indicates a hardware problem.
Device driver indicates a hardware problem.
Ethernet transceiver test failed.
Ethernet 10 Base-2 transceiver test failed.
Internal loopback test failed.
Error log indicates a hardware problem.software
Fuse test failed.
Vital product data test failed.
Vital product data test failed.
RJ-45 converter test failed.
Coprocessor internal test failed.
Internal loopback test failed.
Internal loopback test failed.
External loopback test failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

887-319

887

Description: Device driver indicates a


hardware failure. software

887-400
887-401
887-402
887-403
887-404

D
D
D
D
D

887
887
B09
B08
C29

Description:
Description:
Description:
Description:
Description:

887-405

Ethernet
network

89c-111
89c-112
89c-113
89c-121
89c-122
89c-123
89c-125
89c-126
89c-127
89c-128
89c-129
89c-150
89c-151
89c-152
89c-162
89c-171
89c-172
89c-173
89c-175
89c-198
89c-199
89c-211
89c-281
89c-301
89c-302
900-001
900-002
900-007
900-009
900-064
900-101
900-102
900-103
900-128
900-161
900-191
900-193
900-1FF
900-201
900-202
900-203
900-211

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
G
G
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

89c
89c
89c
89c
89c
89c
89c
89c
89c
89c
89c
Media
89c
89c
89c
89c
89c
89c
89c
89c
89c
89c
89c
89c
89c
900
900
Info code
Info code
900
900
900
900
software
software
900
900
900
900
900
900
software

open in browser PRO version

Fuse test failed.


Circuit breaker for Ethernet test failed.
Ethernet 10 Base-2 transceiver test failed.
Ethernet 10 Base-T transceiver test failed.
RJ-45 converter test failed.

Description: Rerun diagnostics in


advanced mode for accurate problem
determination. 887
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

Unable to reserve device.


Unable to do configuration.
Unable to open the device driver.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
A media error was detected.
A command timeout was detected.
A command reservation conflict was detected.
The CD-ROM drive indicates an error.
Unable to reserve device.
Unable to do configuration.
Unable to open device driver.
The CD-ROM drive indicates an error.
Undefined error detected.
Undefined error detected.
The LED test failed.
No tone during audio test.
Errors found during ELA.
Errors found during ELA.
"NO" to color panel
"NO" to cursor panel
The EMC_SCROLLING_17_H_TEST failed
The EMC_SCROLLING_21_H_TEST failed
TRIO64V+_TIMEOUT
Color miscompare
Clipping error
Rectangle fill test failed
MALLOC_ERROR
Loop count value in rules file is zero
Red screen error
Green screen error
Rectangle fill test failed
Color miscompare
Clipping error
Image transfer across Plane Test failed
INTERNAL_ERROR_DATA_SIZE

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

900-211
900-212
900-215
900-217
900-233
900-234
900-235
900-236
900-237
900-241
900-263
900-2FF

D
D
D
D
D
D
D
D
D
D
D
D

software
software
900
900
software
software
software
software
software
Info code
Info code
900

900-301

900

Description: A write of "0x00" to the


palette register failed

900-302

900

Description: A write of "0x15" to the


palette register failed

900-303

900

Description: A write of "0x2A" to the


palette register failed

900-304

900

Description: A write of "0x3F" to the


palette register failed

900-305

900

Description: The test of the palette


registers failed

900-3FF

900

Description: The test of the palette


registers failed

900-401
900-402
900-403
900-404
900-447
900-449
900-471
900-473
900-495
900-497
900-4FF
900-501
900-502
900-503
900-5FF
900-601
900-602
900-6FF
900-701
900-702

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

900
900
900
900
900
900
900
900
Info code
Info code
900
900
900
900
900
900
900
900
900
900

900-703

900

open in browser PRO version

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

INTERNAL_ERROR_DATA_SIZE
INTERNAL_ERROR_NO_ACCESS
Black screen error
9 x 7 Cross hatch grid failed.
OPEN_RCM_ERROR
IOCTL_GSC_HANDLE_FAILED
AIXGSC_MAKE_GP_FAILED
AIXGSC_UNMAKE_GP_FAILED
DEVICE_BUSY_ERROR
The SCROLLING_17_H_TEST failed.
The EMC_SCROLLING_21_H_TEST failed
Image transfer across Plane Test failed

Frame buffer base address inconsistent


VRAM inaccessible
Miscompare found in VRAM
The test of the VRAM failed
Green screen error
Blue Screen error
9 x 7 Cross hatch grid failed.
11 x 9 Cross hatch grid failed.
The SCROLLING_17_H_TEST failed.
The SCROLLING_21_H_TEST failed.
The test of the VRAM failed
Color miscompare
Clipping error
Direct Frame Buffer test failed
Direct Frame Buffer test failed
Video Stream Register test failed
Video Stream hardware test failed
Video Stream hardware test failed
0 Degree Short Stroke Draw failed
45 Degree Short Stroke Draw failed

Description: Blue Screen error, or 90


Degree Short Stroke Draw failed

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

900-704

900

Description: 135 Degree Short Stroke


Draw failed

900-705

900

Description: White screen error, or 180


Degree Short Stroke Draw failed

900-706

900

Description: 225 Degree Short Stroke


Draw failed

900-707

900

Description: 270 Degree Short Stroke


Draw failed

900-708

900

Description: 315 Degree Short Stroke


Draw failed

900-709

900

Description: Short Stroke Vector


Function test failed

900-727
900-750
900-753
900-7FE
900-7FF
900-801
900-802
900-803
900-804

D
D
D
D
D
D
D
D
D

900
Info code
Info code
900
software
900
900
900
900

900-805

900

Description: Pattern Fill Across the


Plane test failed

900-8FF

900

Description: Pattern Fill Across the


Plane test failed

900-901
900-902
900-903
900-904
900-905
900-906
900-907
900-908
900-909
900-9FF
900-937
900-959
900-961

D
D
D
D
D
D
D
D
D
D
D
D
D

900
900
900
900
900
900
900
900
900
900
900
900
900

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

900-A01

900

Description: Color miscompare of


horizontal top line 227

900-A02

900

Description: Clipping error of


horizontal top line

900-A03

900

open in browser PRO version

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

11 x 9 Cross hatch grid failed.


The SCROLLING_21_H_TEST failed.
The EMC_SCROLLING_17_H_TEST failed
Short Stroke Vector Function test failed
Bad vector detected 900 227
Color for PatBlt thru screen failed
Clipping for PatBlt thru screen failed
Color for PatBlt Across screen failed
Clipping for PatBlt Across screen failed

Color miscompare of white boxes detected


Clipping error of white boxes detected
Color miscompare of color bars detected
Clipping error of white boxes detected
Color miscompare of white boxes detected
Clipping error of white boxes detected
Color miscompare of white boxes detected
Clipping miscompare of white boxes detected
The Area fill test (color bars) failed
The Area fill test (color bars) failed
Red screen error
White screen error
Black screen error 227

Description: Color miscompare of


Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

900-A03

900

Description: Color miscompare of


vertical right line

900-A04

900

Description: Clipping error of vertical


right line

900-A05

900

Description: Color miscompare of


horizontal bottom line

900-A06

900

Description: Clipping error of


horizontal bottom line

900-A07

900

Description: Color miscompare of


vertical left line

900-A08

900

Description: Clipping error of vertical


left line

900-A09

900

Description: Color miscompare of


horizontal center line

900-A0A

900

Description: Clipping error of


horizontal center line

900-A0B

900

Description: Color miscompare of


vertical center line

900-A0C
900-A0D
900-A0F
900-A10
900-A11
900-A12
900-AFF
900-B01
900-B02

D
D
D
D
D
D
D
D
D

900
900
900
900
900
900
900
900
900

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

900-B03

900

Description: Clipped Area Horizontal


color miscompare (background line color wrong)

900-B04

900

Description: Clipped Area Horizontal


clip miscompare (clip of background line wrong)

900-B05

900

Description: Clipped Area Vertical color


miscompare (background line color wrong) 227

900-B06

900

Description: Clipped Area Vertical clip


error (clip of background line wrong) 227

900-B07
900-BFF
900-C01
900-C02
900-CFF
900-D01

D
D
D
D
D
D

900
900
900
900
900
900

Description:
Description:
Description:
Description:
Description:
Description:

open in browser PRO version

Clipping error of vertical center line


Reserved
Reserved
Color miscompare of textured top line
Clipping error of textured top line
Line Drawing Function test failed
Line Drawing Function test failed
Rectangle Area Color miscompare detected
Rectangle Area Clip error detected

The
The
The
The
The
The

clipping function test failed.


clipping function test failed.
BIOS read failed. 227
BIOS function test failed.
BIOS function test failed.
HW cursor function test failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

900-DFF

900

Description: The HW cursor function test failed.

901-xxx

Description: Vendor SCSI device problem.


Refer to the service documentation for
this device.

902-xxx

Description: Vendor display problem.


Refer to the service documentation for
this display.

903-xxx

Description: Vendor Async device


problem. Refer to the service
documentation for this device.

904-xxx

Description: Vendor Parallel device


problem. Refer to the service
documentation for this device.

905-xxx

Description: Vendor device problem.


Refer to the service documentation for
this device.

908-001
to
908-010

908
C33
C48

Description: Invalid function request or


bad parameters passed.

908-016
to
908-019

908

Description: MCIC failed reading header.

908-020
908-111
908-112
908-113

D
D
D
D

C33
908
C33
908

Description:
Description:
Description:
Description:

908-114
to
908-118

C33
908
C36

Description: Errors in loading ASCII


registers.

908-120
to
908-150

908
C33
C36

Description: DMA transfer or PFCA data


error.

908-151
to
908-158

908

Description: SPAN board error.

908-160

908

Description: 7250 is not available. C33 System

908-200
to
908-254

C33
908
C36

Description: GPSS board failure.

908-255

C33

open in browser PRO version

Error closing 7250 DD.


Loader check sum error.
DMA failed to complete a transfer.
Errors in loading ASCII registers.

C36

Description: CP NMI bus timeout

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

908-255

C33
C34

Description: CP NMI bus timeout


interrupt error. 908
C48

908-256
to
908-454

C33
908
C36

Description: GPSS board failure.

908-455

C33
908

Description: CP NMI bus timeout


interrupt error. C34
C48

908-456
to
908-699

C33
908
C36

Description: GPSS board failure.

908-700
to
908-766

C34
C33
C48

Description: BLT or RATTLER error.

908-767
to
908-769

C35
C34
C44

Description: VOO feature error.

908-770
to
908-799

C34
C33
C48

Description: RSS BIST failure.

908-800
908-801
908-802
908-803
908-804
908-805
908-806
908-807
908-808
908-809
908-810
908-811
908-812
908-813
908-814
908-815
908-816
908-817
908-818
908-819
908-820
908-821
908-822
908-823
908-824
908-825

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

C46
C45
C46
C45
C47
C46
C45
C46
C45
C47
C46
C45
C46
C45
C47
C46
C45
C46
C45
C47
C46
C45
C46
C45
C47
C34

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

908-830
to

C34

Description: Multiple SIMMs failed.

open in browser PRO version

Base 16M CHAP0 SIMM bad.


RSS base 12M CHAP0 SIMM bad
RSS AG 16M CHAP0 SIMM bad
RSS AG 12M CHAP0 SIMM bad
RSS TX 16M CHAP0 SIMM bad
Base 16M CHAP 1 SIMM bad
RSS base 12M CHAP1 SIMM bad
RSS AG 16M CHAP1 SIMM bad
RSS AG 12M CHAP1 SIMM bad
RSS TX 16M CHAP1 SIMM bad
RSS base 16M CHAP2 SIMM bad
RSS base 12M CHAP2 SIMM bad
RSS AG 16M CHAP2 SIMM bad
RSS AG 12M CHAP2 SIMM bad
RSS TX 16M CHAP2 SIMM bad
RSS base 16M CHAP3 SIMM bad
RSS base 12M CHAP3 SIMM bad
RSS AG 16M CHAP3 SIMM bad
RSS AG 12M CHAP3 SIMM bad
RSS TX 16M CHAP3 SIMM bad
RSS base 16M CHAP4 SIMM bad
RSS base 12M CHAP4 SIMM bad
RSS AG 16M CHAP4 SIMM bad
RSS AG 12M CHAP4 SIMM bad
RSS TX 16M CHAP4 SIMM bad
RSS error.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

908-870
908-871
to
908-899

D66

Description: RSS error.

908-900
to
908-966

D66
C33
C48

Description: RSS error.

908-967
to
908-969

C35
D66
C48

Description: VOO error.

908-970
to
908-999

D66
C33
C48

Description: RSS error.

912-102
912-104
912-105
912-106
912-108
912-110
912-112
912-114

D
D
D
D
D
D
D
D

912
912
912
912
912
912
912
912

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

912-116

912-117
912-118
912-120
912-122
912-124

D
D
D
D
D

912
912
912
912
912

Description:
Description:
Description:
Description:
Description:

912-126

912

Description: A software error was caused


by a hardware failure.

912-128

912

Description: The error log analysis


indicates a hardware failure.

912-129

D50

Description: Error log analysis


indicates a SCSI bus problem.912 B88 software

912-130

912

Description: Error log analysis


indicates a problem reported by the disk
drive's self monitoring function.

912-132
912-134

D
D

912
B88

Description: A disk drive hardware error occurred.


Description: The adapter failed to configure.software

An unrecoverable media error.


The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

A
A
A
A
A

write protect error occurred.


SCSI command time-out.
B88
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

912-134

B88

Description: The adapter failed to configure.software

912-137

912

Description: Unit attention condition


has occurred on the Send Diagnostic command.

913-102
913-104
913-105
913-106
913-108
913-110
913-112
913-114

D
D
D
D
D
D
D
D

913
913
913
913
913
913
913
913

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

913-116

913-117
913-118
913-120
913-122
913-124

D
D
D
D
D

913
913
913
913
913

Description:
Description:
Description:
Description:
Description:

913-126

913

Description: A software error was caused


by a hardware failure. B88

913-128

913

Description: The error log analysis


indicates a hardware failure.

913-129

D50

Description: Error log analysis


indicates a SCSI bus problem. 913

913-130

913

Description: Error log analysis


indicates a problem reported by the disk
drive's self monitoring function.

913-132
913-134

D
D

913
B88

Description: A disk drive hardware error occurred.


Description: The adapter failed to configure.software

913-137

913

Description: Unit attention condition


has occurred on the Send Diagnostic command.

914-110
914-120
914-130
914-135
914-140
914-150
914-160
914-170
914-180

D
D
D
D
D
D
D
D
D

An unrecoverable media error.


The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

914
914
914
914
914
914
914
914
914

open in browser PRO version

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

A
A
A
A
A

write protect error occurred.


SCSI command time-out. B88
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error.

The
The
The
The
The
The
The
The
The

D50

Reserve command failed.


Inquiry command failed.
Load command failed. media
Unload command failed.media
Mode Select command failed.
Test Unit Ready command failed.media
Send Diagnostic command failed.media
Read, Write and Compare test failed.media
Load command failed. media

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

914-185
914-190
914-200
914-210
914-220
914-230
914-240
914-300
914-310

D
D
D
D
D
D
D
D
D

914
914
914
914
914
914
914
914
B88

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

914-320

914

Description: Error log analysis


indicates a failure. media

914-411
to
914-423

914

Description: A reservation conflict


occurred.
software

914-511
to
914-523

914-611
to
914-623

914-711
to
914-723

915-110
915-120
915-130
915-135
915-140
915-150
915-160
915-169

B88
914

The Unload command failed. media


The Mode Select command failed.
The Test Unit Ready command failed.media
The device configuration failed.B88
The Release command failed.
The Request Sense command failed.
The Openx command failed.
The device configuration failed.software
SCSI adapter configuration failed.

Description: The drive returned bad or


non-extended sense data.

B88
914
B88
914

Description: An adapter or bus I/O error


occurred.
software

B88

Description: A device timeout error


occurred.
software

D
D
D
D
D
D
D
D

915
915
915
915
915
915
915
915

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

915-170

915

Description: The Read, Write and Compare


test failed. B88 media

915-180
915-185
915-190

D
D
D

915
915
915

Description: The Load command failed. media


Description: The Unload command failed.media
Description: The Mode Select command failed.

915-200
915-210
915-220
915-230
915-240
915-300
915-310
915-320

D
D
D
D
D
D
D
G

915
915
915
915
915
915
B88
915

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

915-411

915

open in browser PRO version

The
The
The
The
The
The
The
The

Reserve command is corrupted.


Inquiry command failed.
Load command failed. media
Unload command failed. media
Mode Select command failed.
Test Unit Ready command failed.media
Send Diagnostic command failed.
send diagnostic command failed. media

The Test Unit Ready command failed. media


The device configuration failed.
The Replace command failed.
The Request Sense command failed.
The Openx command failed.
The device configuration failed. software
SCSI adapter configuration failed.
Error log analysis indicates a failure.

Description: A reservation conflict


Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

915-411
to
915-423

915

915-511
to
915-523

915-611
to
915-623

915-711
to
915-723

917-102
917-104
917-105
917-106
917-108
917-110
917-112
917-114

D
D
D
D
D
D
D
D

917-116

917-117
917-118
917-120
917-122
917-124

D
D
D
D
D

917
917
917
917
917

Description:
Description:
Description:
Description:
Description:

917-126

917

Description: A software error was caused


by a hardware failure. B88

917-128

917

Description: The error log analysis


indicates a hardware failure.

917-129

D50

Description: Error log analysis


indicates a SCSI bus problem. software

917-130

917

Description: Error log analysis


indicates a problem reported by the disk
drive's self monitoring function.

917-132
917-134
917-135
917-136

D
D
D
D

917
B88
917
917

Description:
Description:
Description:
Description:

B88
915

Description: A reservation conflict


occurred.
software
Description: The drive returned bad or
non-extended sense data.

B88
915
B88
915

Description: An adapter or bus I/O error


occurred.
software

B88

Description: A device timeout error


occurred.
software

917
917
917
917
917
917
917
917

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

An unrecoverable media error.


The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

A
A
A
A
A

write protect error occurred.


SCSI command time-out. B88
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error.

A disk drive hardware error occurred.


The adapter failed to configure.software
The device failed to configure.B88 software
The certify operation failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

917-137

917

Description: Unit attention condition


has occurred on the Send Diagnostic command.

918-102
918-104
918-105
918-106
918-108
918-110
918-112
918-114

D
D
D
D
D
D
D
D

918
918
918
918
918
918
918
918

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

918-116

918-117
918-118
918-120
918-122
918-124

D
D
D
D
D

918
918
918
918
918

Description:
Description:
Description:
Description:
Description:

918-126

918

Description: A software error was caused


by a hardware failure.
B88

918-128

918

Description: The error log analysis


indicates a hardware failure.

918-129

D50

Description: Error log analysis


indicates a SCSI bus problem. 918 software

918-130

918

Description: Error log analysis


indicates a problem reported by the disk
drive's self monitoring function.

918-132
918-134
918-135
918-136

D
D
D
D

918
B88
918
918

Description:
Description:
Description:
Description:

918-137

918

Description: Unit attention condition


has occurred on the Send Diagnostic command.

921-101

821

Description: An unexpected adapter error occurred.

921-102

921

Description: An unexpected device or


adapter error occurred. 821

921-103
921-104
921-105

D
D
D

921
921
921

Description: The keyboard reset failed.


Description: Unknown keyboard.
Description: The keyboard light on test failed.

An unrecoverable media error.


The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

A
A
A
A
A

write protect error occurred.


SCSI command time-out.B88
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error.

A disk drive hardware error occurred.


The adapter failed to configure.software
The device failed to configure.
The certify operation failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

921-105
921-106
921-201

D
D
D

921
921
821

Description: The keyboard light on test failed.


Description: The keyboard light off test failed.
Description: An unexpected adapter error occurred.

921-202

921

921-203
921-204
921-205
921-206
921-301

D
D
D
D
D

921
921
921
921
821

Description: An unexpected device or


adapter error occurred. 821
Description: The read keyboard ID test failed.
Description: The keyboard layout ID test failed.
Description: The keyboard echo test failed.
Description: The select scan code set test failed.
Description: An unexpected adapter error occurred.

921-302

921

Description: An unexpected device or


adapter error occurred.

921-303

921

Description: An error occurred in


turning on the lamps.

921-304

921

Description: An error occurred in


turning off the lamps.

921-401

821

Description: An unexpected adapter error occurred.

921-402

921

Description: An unexpected device or


adapter error occurred.
821

921-403
921-404
921-501

D
D
D

921
921
821

Description: Unable to recognize the keyboard.


Description: The keyboard is failing. 821
Description: An unexpected adapter error occurred.

921-502

921

Description: An unexpected device or


adapter error occurred.
821

921-503
921-504
921-505
921-601
921-602
921-603
921-701

D
D
D
D
D
D
D

921
921
921
821
921
921
921

Description:
Description:
Description:
Description:
Description:
Description:
Description:

921-901

821

Description: The error log analysis


indicates an adapter failure.

921-902

921

Description: The error log analysis


indicates a device failure.
821

921-903

921

Description: The error log analysis


indicates an unknown failure.
821

922-101

821

Description: An unexpected adapter error occurred.

922-102

922

Description: An unexpected device


or adapter error occurred. 821

open in browser PRO version

The auto-click cannot be disabled.


The auto-click cannot be enabled.
Unable to recognize the keyboard.
An unexpected adapter error occurred.
An unexpected device or adapter error occurred.
The speaker test failed.
Error configuring the device. 821

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

922-103
922-104
922-105
922-106
922-201

D
D
D
D
D

922
922
922
922
821

Description:
Description:
Description:
Description:
Description:

The keyboard reset failed.821


Unknown keyboard.
The keyboard light on test failed.
The keyboard light off test failed.
An unexpected adapter error occurred.

922-202
922-203
922-204
922-205
922-206
922-301

D
D
D
D
D
D

922
922
922
922
922
821

Description:
Description:
Description:
Description:
Description:
Description:

An unexpected device or adapter error occurred.


The read keyboard id test failed.
The keyboard layout id test failed.
The keyboard echo test failed.
The select scan code set test failed.
An unexpected adapter error occurred.

922-302

922

Description: An unexpected device or


adapter error occurred. 821

922-303

922

Description: An error occurred in


turning on the lamps.

922-304

922

Description: An error occurred in


turning off the lamps.

922-401

821

Description: An unexpected adapter error occurred.

922-402

922

Description: An unexpected device or


adapter error occurred.
821

922-403
922-404
922-501

D
D
D

922
922
821

Description: The keyboard is failing.


Description: Unable to recognize the keyboard.
Description: An unexpected adapter error occurred.

922-502

922

Description: An unexpected device or


adapter error occurred.

922-503
922-504
922-505
922-601

D
D
D
D

921
922
922
821

Description:
Description:
Description:
Description:

922-602

922

Description: An unexpected device or


adapter error occurred. 821

922-603
922-701
922-901
922-902

D
D
G
G

922
922
821
922

Description:
Description:
Description:
Description:

922-903

922

Description: The error log analysis


indicates an unknown failure. 821

923-101

821

Description: An unexpected adapter error occurred.

923-102

923

Description: An unexpected device or


adapter error occurred. 821

open in browser PRO version

The auto-click cannot be disabled.


The auto-click cannot be enabled.
Unable to recognize the keyboard.
An unexpected adapter error occurred.

The speaker test failed.


Error configuring the device.
The error log indicates an adapter failed.
The error log indicates a device failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

923-103
923-104
923-105
923-106
923-201

D
D
D
D
D

923
923
923
923
821

Description:
Description:
Description:
Description:
Description:

923-202

923

Description: An unexpected device or


adapter error occurred.
821

923-203
923-204
923-205
923-206
923-301

D
D
D
D
D

923
923
923
923
821

Description:
Description:
Description:
Description:
Description:

923-302

923

Description: An unexpected device or


adapter error occurred.
821

923-303

923

Description: An error occurred in


turning on the lamps.

923-304

923

Description: An error occurred in


turning off the lamps.

923-401

821

Description: An unexpected adapter error occurred.

923-402

923

Description: An unexpected device or


adapter error occurred.

923-403
923-404
923-501

D
D
D

923
923
821

Description: The keyboard is failing.


Description: Unable to recognize the keyboard.
Description: An unexpected adapter error occurred.

923-502

923

923-503

923

Description: An unexpected device or


adapter error occurred.
821
Description: The auto-click cannot be disabled.

923-504
923-505
923-601

D
D
D

923
923
821

Description: The auto-click cannot be enabled.


Description: Unable to recognize the keyboard.
Description: An unexpected adapter error occurred.

923-602

923

Description: An unexpected device or


adapter error occurred. 821

923-603
922-701
923-901

D
D
G

923
923
821

Description: The speaker test failed.


Description: Error configuring the device.
Description: The error log indicates an adapter failed.

923-902

923

Description: The error log analysis


indicates a device failure.
821

923-903

923

Description: The error log analysis


indicates an unknown failure.
821

open in browser PRO version

The keyboard reset failed. 821


Unknown keyboard.
The keyboard light on test failed.
The keyboard light off test failed.
An unexpected adapter error occurred.

The read keyboard id test failed.


The keyboard layout id test failed.
The keyboard echo test failed. 821
The select scan code set test failed.
An unexpected adapter error occurred.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

925-111
925-112
925-113
925-114
925-115
925-116
925-117
925-118

D
D
D
D
D
D
D
D

925
925
925
925
925
925
925
925

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

925-121
to
925-171

925

Description: The device test failed.

925-200

925

Description: A software error was caused


by a hardware failure.

925-300

925

Description: The error log analysis


indicates a hardware failure.

925-301

925

Description: The error log analysis


indicates a hardware failure. 823

926-104

926

Description: Input device cable is not


attached. 159

926-111

824

Description: Adapter error.

926-112
to
926-115

926

Description: Device, adapter or tablet


reset failed. 824

926-116
926-119
926-121
926-131

D
D
D
D

159
188
824
824

Description:
Description:
Description:
Description:

926-132
to
926-135

926

Description: Device or adapter error.

926-141

824

Description: Adapter error. 926

926-142
to
926-161

926

Description: Device or adapter error.

926-162
926-163
926-164
926-165
926-166
926-167
926-168
926-169
926-172

D
D
D
D
D
D
D
D
D

159
159
159
159
188
188
188
188
159

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

open in browser PRO version

An unexpected device error occurred.


The device disable test failed.
Could not reset the device.
The read status command failed.
The device test failed.
Unknown Mouse type.
Mouse wrap mode failed. 823
Error setting mouse parameters.

The input device cable is not attached.


The input device cable is not attached.
Adapter error.
Adapter error.926

Device or adapter error.926


Error in turning off input device LED.
Error in turning off input device LED.
The input device cable is not attached.
Device or adapter error. 926
Error in turning off input device LED.
Error in turning on input device LED.
The input device cable is not attached.
Device or adapter error. 926

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

926-172
926-173
926-174
926-175
926-176
926-177
926-178
926-179
926-181
926-182
926-183
926-184
926-186
926-187
926-188
926-203
926-204
926-207
926-208
926-221
926-222
926-225
926-229
926-271
926-272
926-273
926-274
926-276
926-277
926-278
926-281
926-282
926-283
926-284
926-286
926-287
926-288
927-104
927-111
927-112
927-113
927-114
927-115
927-116
927-119
927-121
927-122
927-125
927-131
927-132
927-133
927-134
927-135
927-141
927-142

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

159
159
159
159
188
188
188
188
824
159
159
159
188
188
188
926
926
926
926
824
926
159
188
926
159
159
159
188
188
188
824
159
159
159
188
188
188
927
824
927
927
927
927
159
188
824
927
927
824
927
927
927
927
824
927

open in browser PRO version

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

Device or adapter error. 926


Error in turning off input device switch.
Error in turning on input device switch.
The input device cable is not attached.
Device or adapter error.
926
Error in turning off input device switch.
Error in turning on input device switch.
The input device cable is not attached.
Adapter error.
926
Device or adapter error. 926
Error in incremental data mode test.
The input device cable is not attached.
Device or adapter error. 926
The incremental data mode test failed.
The input device cable is not attached.
Error in disabling tablet. 824
Error in enabling tablet. 824>
Enabled/disabled test failed.
Enabled/disabled test failed.
Adapter error.
Device or adapter error.824
The input device cable is not attached.
The input device cable is not attached.
Adapter error.
Device or adapter error.
Error in input device switch test.
The input device cable is not attached.
Device or adapter error. 926
Error in input device switch test.
Input device cable is not attached.
Adapter error. 926
Device or adapter error. 926
Error in incremental data mode test.
The input device cable is not attached.
Device or adapter error.
926
Error in incremental data mode test.
The input device cable is not attached.
The input device cable is not attached.
Adapter error.
Device or adapter error.824
Tablet reset failed. 824
The read configuration test failed.824
The read status test failed. 824
The input device cable is not attached.
The input device cable is not attached.
Adapter error.
Device or adapter error.
824
The input device cable is not attached.
Adapter error.
927
Device or adapter error.
The set conversion mode test failed.
The set resolution test failed.
The read status test failed.
Adapter error.
927
Device or adapter error.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

927-143
927-161
927-162
927-163
927-164
927-165
927-166
927-167
927-168
927-169
927-171
927-172
927-173
927-174
927-175
927-176
927-177
927-178
927-179
927-181
927-182
927-183
927-184
927-186
927-187
927-188
927-203
927-204
927-221
927-222
927-225
927-229
927-271
927-272
927-273
927-274
927-276
927-277
927-278
927-281
927-282
927-283
927-284
927-286
927-287
927-288
929-201
929-202
929-203
929-204
929-210
929-212
929-213
929-299
929-301

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

927
927
159
159
159
159
188
188
188
188
927
159
159
159
159
188
188
188
188
824
159
159
159
188
188
188
927
927
824
927
159
188
927
159
159
159
188
188
188
824
159
159
159
188
188
188
929
929
929
929
929
929
929
software
software

open in browser PRO version

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

Error in tablet indicator.


Adapter error.
Device or adapter error. 927
Error in turning off input device LED.927
Error in turning on input device LED. 927
The input device cable is not attached.
Device or adapter error.
927
Error in turning off input device LED.
Error in turning on input device LED.
The input device cable is not attached.
Adapter error.
Device or adapter error.
927
Error in turning off input device switch.
Error in turning on input device switch.
The input device cable is not attached.
Device or adapter error. 927
Error in turning off input device switch.
Error in turning on input device switch.
The input device cable is not attached.
Adapter error. 927
Device or adapter error. 927
Error in incremental data mode test.
The input device cable is not attached.
Device or adapter error. 927
Error in incremental data mode test.
The input device cable is not attached.
Error in disabling tablet. 824
Error in enabling tablet. 824
Adapter error.
Device or adapter error. 824
The input device cable is not attached.
The input device cable is not attached.
Adapter error.
Device or adapter error. 927
Error in input device switch test.
The input device cable is not attached.
Device or adapter error. 927
Error in input device switch test.
The input device cable is not attached.
Adapter error. 927
Device or adapter error.
Error in incremental data mode test.
The input device cable is not attached.
Device or adapter error. 927
Error in incremental data mode test.
The input device cable is not attached.
Failed to register input ring
Unable to read event from the device
Unable to communicate with the device.
Cannot set the device granularity
Device or adapter failure
Cannot set the device to HIGH granularity
Cannot set the device to LOW granularity
Error unconfiguring the device 929
Error configuring the device 929

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

929-301
930-201
930-210
930-220
930-230
930-241
930-242
930-243
930-261
930-262
930-299
930-301

D
D
G
G
D
D
D
D
D
D
D
D

software
930
930
930
930
930
930
930
930
930
software
software

935-101
to
935-102

935

Description: The diskette-drive select


or deselect test failed.

935-103
to
935-107

935

Description: The diskette failed.

935-108

935

Description: The diskette read test failed.

935-109
to
935-110

935

Description: The read/write on the


diskette drive failed.

935-111
to
935-114

935

Description: A diskette drive test


failed.

935-115
to
935-121

935

Description: The diskette drive test


failed.

935-122

935

935-123

935

Description: The error log analysis


indicates a hardware failure.

935-124

935

Description: Unable to configure the


device. software

945-102
to
945-114

990

Description: 1GB 16-bit SCSI


differential disk drive problem.

945-116

open in browser PRO version

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

Error configuring the device 929


Device or adapter failure
Unable to turn the lights on
Unable to turn the lights off hardware failure.
Unable to turn the lights off
Unable to turn a single light on
Device or adapter failure
Device or adapter failure
Cable test failed
Cable test failed
Error unconfiguring the device
Error configuring the device0

Description: The error log analysis


indicates a hardware failure. 828

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

945-117
945-118

D
D

990
990

Description: A write protect error occurred.


Description: A SCSI command time-out.B88

945-120
to
945-124

990

Description: 1GB 16-bit SCSI


differential disk drive problem.

945-126

990

Description: A software error was caused


by a hardware failure. B88

945-128

990

Description: The error log analysis


indicates a hardware failure.

945-129

D50

Description: Error log analysis


indicates a SCSI bus problem.945 B88 software

945-130

945

Description: Error log analysis


indicates a problem reported by the disk
drive's self monitoring function.

945-132
945-134
945-136

D
D
D

990
B88
990

Description: A disk drive hardware error occurred.


Description: The adapter failed to configure. software
Description: The certify operation failed.

945-137

945

Description: Unit attention condition


has occurred on the Send Diagnostic
command.D50

946-111

946

Description: Cannot run the test


because the device driver detected a
hardware error.

946-114

946

Description: The register verification test failed.

946-121

946

Description: Cannot run the test


because the device driver detected a
hardware error.

946-122
946-123

D
D

946
946

Description: The data wrap communications test failed.


Description: The modem control line test failed.

946-131

946

Description: Cannot run the test


because the device driver detected a
hardware error.

946-132
946-133

D
D

946
946

Description: The data wrap communications test failed.


Description: The modem control line test failed.

946-161

252

Description: Could not do the test


because the device driver detected a
hardware error.

946-162
946-163

D
D

252
252

open in browser PRO version

Description: The data wrap communication test failed.


Description: The modem control line test failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

946-171

259

Description: Cannot run the test


because the device driver detected a
hardware error.

946-172
946-173

D
D

259
259

Description: The data wrap communications test failed.


Description: The modem control line test failed.

946-181

261

Description: Cannot run the test


because the device driver detected a
hardware error.

946-182
946-183

D
D

261
261

Description: The data wrap communications test failed.


Description: The modem control line test failed.

946-271

946

Description: Cannot run the test because the device


driver detected a hardware error.

946-272
946-273

D
D

946
946

Description: The data wrap communication test failed.


Description: The modem control line test failed.

946-281

946

Description: Cannot run the test


because the device driver detected a hardware error.

946-282
946-283

D
D

946
946

Description: The data wrap communications test failed.


Description: The modem control line test failed.

946-321

946

Description: Cannot run the test


because the device driver detected a

hardware error.

946-322
946-323

D
D

946
946

Description: The data wrap communications test failed.


Description: The modem control line test failed.

946-331

946

Description: Cannot run the test because the


device driver detected a hardware error.

946-332
946-333
946-371

D
D
D

946
946
946

Description: The data wrap communications test failed.


Description: The modem control line test failed.
Description: Cannot run the test
because the device driver detected a hardware error.

946-372
946-373

D
D

946
946

Description: The data wrap communications test failed.


Description: The modem control line test failed.

946-381

946

Description: Cannot run the test


because the device driver detected a hardware error.

946-382
946-383

D
D

946
946

Description: The data wrap communications test failed.


Description: The modem control line test failed.

946-481

D56

Description: Could not do the test


because the device driver detected a hardware error.

946-482
946-483

D
D

D56
D56

Description: The data wrap communication test failed.


Description: The modem control line test failed.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

946-581

946

Description: Could not do the test


because the device driver detected a hardware error.

946-582
946-583

D
D

946
946

Description: The data wrap communication test failed.


Description: The modem control line test failed.

946-901
to
946-920

946-921

946-922
to
946-924

946-925

946-926
to
946-943

950-100

192

Description: Power supply problem.


Action: Use the service documentation for
the portable disk.

950-101

2C9

Description: PCI bus was not found.


Action: Rerun diagnostics in Advanced
Mode for additional problem isolation.

950-102
950-103
950-105

C
C
C

2C9
2C9
2C9

Description: PCI bus was not found.


Description: Multiple adapters on bus were not found.
Description: PCI bus was not found. 221

software

946
software

946
software

open in browser PRO version

Description: An unexpected error


occurred that can be attributed to software or hardware.
Action: Run diagnostics from a source
other than from the disk or a network. If
the same error occurs or if the original
SRN was not obtained from disk or a
network based diagnostics, use Chapter
12. "MAP 0210: General Problem
Resolution" with a FFC of 946; otherwise,
suspect a software problem.
Description: The adapter failed to configure software
Description: An unexpected error
occurred that can be attributed to software or hardware.
Action: Run diagnostics from a source
other than from the disk or a network. If
the same error occurs or if the original
SRN was not obtained from disk or a
network based diagnostics, use Chapter
12. "MAP 0210: General Problem
Resolution" with a FFC of 946; otherwise,
suspect a software problem.
Description: The adapter failed to configure software
Description: An unexpected error
occurred that can be attributed to software or hardware.
Action: Run diagnostics from a source
other than from the disk or a network. If
the same error occurs or if the original
SRN was not obtained from disk or a
network based diagnostics, use Chapter
12. "MAP 0210: General Problem
Resolution" with a FFC of 946; otherwise,
suspect a software problem.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

950-105
950-106

C
C

2C9
2C9

Description: PCI bus was not found. 221


Description: PCI bus was not found.

950-107

153
165

Description: The device is not responding


Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
unit. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".

950-108

201

Description: The device is not


responding. Action: For devices located
in drawer/deskside units, use the service
documentation for the drawer/deskside
unit. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".

199
153
165
950-200

203

950-201

950-400

153

Description: Power supply problem.


Action: Use the service documentation for
the drawer/tower containing the failing
power supply. If the drawer/deskside unit
service documentation does not isolate
the problem, go to MAP 1520 in the system
unit installation and service guide.

950-500

152

Description: Power supply problem.


Action: Use the service documentation for
either the system unit, rack or
drawer/deskside unit the missing device
is located in.

950-679

679
B88

SCSI Bus

190
199
950-700

700
B88
152

open in browser PRO version

Description: Power supply problem.


Action: Use the service documentation for
the external device.
Description: SCSI bus problem.
Action: Refer to MAP 2010 in the 7134
High Density SCSI Disk Subsystem
Installation and Service Guide.

Description: The SCSI Disk Drive is not responding.


Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
unit. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
152
Description: The device is not responding.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
unit. For all other locations, use

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

Chapter 12. "MAP 0210: General Problem


Resolution".
950-701

701
B88
152

950-702

702
B88
152

950-703

703
B88
152

950-704

704
B88
152

950-705

705
B88
152

950-706

706
B88
152

950-707

707
B88
152

open in browser PRO version

Description: The device is not responding.


Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
unit. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: The device is not responding.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
unit. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: The device is not responding.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
unit. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: The device is not responding.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
unit. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: The device is not responding.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
unit. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: The device is not responding.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
unit. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: The device is not responding.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

152

documentation for the drawer/deskside


unit. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".

950-721

721

Description: An unknown drive type is not responding.

950-722

722
B88

Description: The device is not responding.


Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
unit. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".

152

950-723

723
B88
152

950-724

724
B88
152

950-734

734
B88
152

950-741

741
B88
152

950-772

772
B88
199
152

open in browser PRO version

Description: The device is not responding.


Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
unit. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: The device is not responding.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
unit. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: The device is not responding.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
unit. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

950-773

773
B88
152

950-789

789
B88
152

950-792

792
B88
152

950-793

793
B88
152

950-804

804
B88
152

950-912

912
B88
152

950-914

914
B88
152

open in browser PRO version

Description: Device does not respond.


Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: The device is not responding.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
unit. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

Resolution".
950-915

915
B88
152

950-917

917
B88
152

950-918

918
B88
152

Description: Device does not respond.


Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".

950-935
950-936

C
C

935
936

Description: Device does not respond.828 52 199


Description: Device does not respond. 828 152

950-951

951

Description: Device does not respond.


Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".

B88
152

950-952

952
B88
152

950-953

953
B88
152

950-954

954

open in browser PRO version

Description: Device does not respond.


Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

B88
152

950-955

955
B88
141
152

950-956

956
B88
152

950-959

959
B88
152

950-960
950-968

C
C

960
968

950-970

970
B88
152

950-971

971
B88
152

950-972

972
B88

open in browser PRO version

drawer/deskside units, use the service


documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution". If the drawer/deskside unit
service documentation does not isolate
the problem, go to Chapter 12. "MAP 0210:
General Problem Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond. B88 152
Description: Device does not respond. B88 152
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

B88
152

950-974

974
B88
152

950-981

981
B88
152

950-984

984
B88
152

950-986

986
B88
152

950-987

974
B88
152

950-989

989
B88
152

open in browser PRO version

drawer/deskside units, use the service


documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. Refer to "Drawer/Deskside Unit
Documentation" under Service Hints in
Chapter 1. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

950-990

990
B88
152

950-991

991

950-994

994
B88
152

950-995

995
B88
152

950-998

998
B88
152

950-xxx
(See note
in the

xxx
B88
152

Action
col.)

951-098
951-099
951-102
951-104

J
J
D
D

951
951
951
951

open in browser PRO version

Description: Device does not respond.


Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: Device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. For all other locations, use
Chapter 12. "MAP 0210: General Problem
Resolution".
Description: The device does not respond.
Action: For devices located in
drawer/deskside units, use the service
documentation for the drawer/deskside
units. Refer to "Drawer/Deskside Unit
Documentation" under Service Hints in
Chapter 1. For all other locations use
Chapter 12. "MAP 0210: General Problem
Resolution".
Note: If your 950-xxx SRN is listed in
this section, use the procedure for that
SRN instead of this one. Otherwise, to
obtain the FFC substitute the last three
digits of the SRN for xxx. (The
substituted three digit number is the FFC.)
Description:
Description:
Description:
Description:

Disk drive indicates an error


Disk drive not found.
An unrecoverable media error.
The motor failed to restart.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

951-104
951-105
951-106
951-108
951-110
951-112
951-114

D
D
D
D
D
D
D

951
951
951
951
951
951
951

Description:
Description:
Description:
Description:
Description:
Description:
Description:

The motor failed to restart.


The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

951-116

951-117
951-118
951-120
951-122
951-124
951-126
951-128

D
D
D
D
D
D
G

951
951
951
951
951
951
951

Description:
Description:
Description:
Description:
Description:
Description:
Description:

951-129

D50

Description: Error log analysis


indicates a SCSI bus problem.951 B88 software

951-130

951

Description: Error log analysis


indicates a problem reported by the disk
drive's self monitoring function.

951-132
951-134
951-135
951-136

D
D
D
D

951
B88
951
951

Description:
Description:
Description:
Description:

951-137

951

Description: Unit attention condition


has occurred on the Send Diagnostic command.

952-098
952-099
952-102
952-104
952-105
952-106
952-108
952-110
952-112
952-114

J
J
D
D
D
D
D
D
D
D

952
952
952
952
952
952
952
952
952
952

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

952-116

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to ensure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

A write protect error occurred.


A SCSI command timeout.
A SCSI busy or command error.
A SCSI reservation conflict error.
A SCSI check condition error.
A software error was caused by a hardware failure.
The error log analysis indicates a hardware failure.

A disk drive hardware error occurred.


The adapter failed to configure. software
The device failed to configure.software
The certify operation failed.

Disk drive indicates an error.


Disk drive not found.
An unrecoverable media error.
The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

952-117
952-118
952-120
952-122
952-124

D
D
D
D
D

952
952
952
952
952

Description:
Description:
Description:
Description:
Description:

A
A
A
A
A

write protect error occurred.


SCSI command timeout.
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error.

952-126

952

Description: A software error was


caused by a hardware failure.

952-128

952

Description: The error log analysis


indicates a hardware failure.

952-129

D50

Description: Error log analysis


indicates a SCSI bus problem. 952 b88

software

952-130

952

Description: Error log analysis


indicates a problem reported by the disk
drive's self monitoring function.

952-132
952-134
952-135
952-136

D
D
D
D

952
B88
952
952

Description:
Description:
Description:
Description:

A disk drive hardware error occurred.


The adapter failed to configure.software
The device failed to configure.Software
The certify operation failed.

952-137

952

Description: Unit attention condition


has occurred on the Send Diagnostic command. D50

953-098
953-099
953-102
953-104
953-105
953-106
953-108
953-110
953-112
953-114

J
J
D
D
D
D
D
D
D
D

953
953
953
953
953
953
953
953
953
953

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

953-116

953-117
953-118
953-120
953-122
953-124

D
D
D
D
D

953
953
953
953
953

Description:
Description:
Description:
Description:
Description:

953-126

953

Description: A software error was


caused by a hardware failure. B88

Disk drive indicates an error.


Disk drive not found.
An unrecoverable media error.
The motor failed to restart.
The disk drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

A
A
A
A
A

write protect error.


SCSI command timeout.
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

953-128

953

Description: The error log analysis


indicates a hardware failure.

953-129

D50

Description: Error log analysis


indicates a SCSI bus problem. 953 B88 software

953-130

953

Description: Error log analysis


indicates a problem reported by the disk
drive's self monitoring function.

953-132
953-134
953-135
953-136

D
D
D
D

953
B88
953
953

Description:
Description:
Description:
Description:

953-137

953

Description: Unit attention condition


has occurred on the Send Diagnostic command.

954-098
954-099
954-102
954-104
954-105
954-106
954-108
954-110
954-112
954-114

J
J
D
D
D
D
D
D
D
D

954
954
954
954
954
954
954
954
954
954

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

954-116

954-117
954-118
954-120
954-122
954-124
954-126
954-128

D
D
D
D
D
D
G

954
954
954
954
954
954
954

Description:
Description:
Description:
Description:
Description:
Description:
Description:

954-129

D50

Description: Error log analysis


indicates a SCSI bus problem.954 B88 software

954-130

954

Description: Error log analysis


indicates a problem reported by the disk
drive's self monitoring function.

954-132
954-134
954-135

D
D
D

954
B88
954

Description: A disk drive hardware error occurred.


Description: The adapter failed to configure.software
Description: The device failed to configure. software

A disk drive hardware error occurred.


The adapter failed to configure. software
The device failed to configure.B88 software
The certify operation failed.

Disk drive indicates an error.


Disk drive not found.
An unrecoverable media error.
Motor failed to restart.
The disk drive did not become ready.
Electronics card failure.
Bus failure.
The media format is corrupted.
Diagnostic failure.
An unrecoverable hardware error.

Description: A protocol error was detected.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software, ensure that they
are all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

Write protect error.


SCSI command timeout.
SCSI busy/command error.
SCSI reservation conflict error.
SCSI check condition error.
Software error caused by hardware failure.
Error log analysis indicates hardware failure.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

954-136

954

Description: The certify operation failed.

954-137

954

Description: Unit attention condition


has occurred on the Send Diagnostic command. D50

955-098
955-099
955-102

J
J
D

955
955
955

Description: Disk drive indicates an error.


Description: Disk drive not found.
Description: A media error was encountered.141

955-104

955
141

Description: The motor failed to restart.


Action: For devices installed in a
drawer/deskside unit, use the
drawer/deskside unit documentation. Refer
to "Drawer/Deskside Unit Documentation"
under Hints in Chapter 1. For other
locations, go to MAP 0210. If the
electronics card has been exchanged,
exchange the adapter first. If the
drawer/deskside unit documentation does
not isolate the problem, go to MAP 0210.

955-105
955-106
955-108
955-110
955-112
955-114

D
D
D
D
D
D

955-116

955
955
955
955
955
955

Description:
Description:
Description:
Description:
Description:
Description:

The disk drive did not become ready.


The electronics card failed. 141
The bus test failed.
The media format is corrupted.141
The diagnostic test failed. 141
An unrecoverable hardware error. 141

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

955-118
955-120
955-122
955-124

D
D
D
D

955
955
955
955

Description:
Description:
Description:
Description:

955-126

955

Description: A software error was


caused by a hardware failure. B88

955-128

955

Description: The error log analysis


indicates a hardware failure. 141

955-129

D50

Description: Error log analysis


indicates a SCSI bus problem. 955 B88 software

955-130

955

Description: Error log analysis


indicates a problem reported by the disk
drive's self monitoring function.

955-132

955

open in browser PRO version

A
A
A
A

SCSI
SCSI
SCSI
SCSI

command timeout. B88


busy or command error. B88
reservation conflict error.
check condition error. B88

Description: A disk drive hardware error occurred.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

955-134

B88

Description: The adapter failed to


configure. software

955-135

955

Description: The device failed to


configure. software

955-136

955

Description: The certify operation failed. 141

955-137

955

Description: Unit attention condition


has occurred on the Send Diagnostic command. D50

956-102
956-104
956-105
956-106
956-108
956-110

D
D
D
D
D
D

956
956
956
956
956
956

Description:
Description:
Description:
Description:
Description:
Description:

956-112
956-114

D
D

956
956

Description: The diagnostic test failed.


Description: An unrecoverable hardware error.

956-116

956-117
956-118
956-120
956-122
956-124

D
D
D
D
D

956
956
956
956
956

Description:
Description:
Description:
Description:
Description:

956-126

956

Description: A software error was caused


by a hardware failure.

An unrecoverable media error.


The motor failed to restart.
The drive did not become
ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.
A
A
A
A
A

write protect error occurred.


SCSI command time-out.
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error.

956-128

956

Description: The error log analysis


indicates a hardware failure.

956-130

956

Description: The error log analysis


indicates a hardware failure.

956-132

956

Description: A disk drive hardware error occurred.

956-134
956-136
959-098
959-099
959-102
959-104
959-105
959-106
959-108

D
D
J
j
D
D
D
D
D

B88
956
959
959
959
959
959
959
959

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

open in browser PRO version

The adapter failed to configure.software


The certify operation failed.
Disk drive indicates an error.
Disk drive not found.
Non-recoverable medium error.
Motor failed to restart.
The drive did not become ready.
Electronics card failure.
Bus failure.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

959-110
959-112
959-114

D
D
D

959-116

959
959
959

Description: The media format is corrupted.


Description: Diagnostic failure.
Description: Non-recoverable hardware error.
Description: A protocol error was
detected.
Action: Check the levels of the device,
adapter, diagnostic and application
software, and ensure they are all
compatible. If you do not find a problem,
call your support person.

959-117
959-118
959-120
959-122
959-124

D
D
D
D
D

959
959
959
959
959

Description:
Description:
Description:
Description:
Description:

Write protect error.


SCSI command timeout.
SCSI busy/command error.
SCSI reservation conflict error.
SCSI check condition error.

959-126

959

Description: Software error caused by


hardware failure.

959-128

959

Description: Error log analysis


indicates hardware failure.

959-129

D50

Description: Error log analysis


indicates a SCSI bus problem. 959

B88 software

959-130

959

Description: Error log analysis


indicates a problem reported by the disk
drive's self monitoring function.

959-134
959-135
959-136

D
D
D

B88
959
959

Description: The adapter failed to configure.software


Description: The device failed to configure.B88 software
Description: The certify operation failed.

959-137

959

Description: Unit attention condition


has occurred on the Send Diagnostic command.

960-102
960-104
960-105
960-106
960-108
960-110
960-112
960-114

D
D
D
D
D
D
D
D

960
960
960
960
960
960
960
960

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

960-116

960-117

An unrecoverable media error.


The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.
960

open in browser PRO version

Description: A write protect error occurred.


Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

960-117
960-118
960-120
960-122
960-124

D
D
D
D
D

960
960
960
960
960

Description:
Description:
Description:
Description:
Description:

960-126

960

Description: A software error was caused


by a hardware failure.

960-128

960

Description: The error log analysis


indicates a hardware failure.

960-129

D50

Description: Error log analysis


indicates a SCSI bus problem.960 B88 software

960-130

960

Description: Error log analysis


indicates a problem reported by the disk
drive's self monitoring function.

960-132
960-134
960-135
960-136

D
D
D
D

960
B88
960
960

Description:
Description:
Description:
Description:

960-137

960

Description: Unit attention condition


has occurred on the Send Diagnostic command.

964-098

964

Description: Tape drive indicates an error.

964-099

964

Description: Tape drive not found.

964-101

964

Description: Timeout while attempting


to communicate with SCSI device.

964-102

964

Description: The SCSI device indicates busy.

964-103

964

Description: The SCSI device indicates


a reservation conflict.

964-104

964

Description: The SCSI device indicates


a check condition.

964-105

964

Description: An error is detected in


request sense data.

964-107

964

Description: Sense data from the SCSI


drive has unexpected data.

964-110

964

Description: The Reserve command failed.

964-111

964

Description: Invalid condition from the


drive after a reserve.

964-112

964

Description: The write protect sensor test failed.

open in browser PRO version

A
A
A
A
A

write protect error occurred.


SCSI command time-out.
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error.

A disk drive hardware error occurred.


The adapter failed to configure. software
The device failed to configure.software
The certify operation failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

964-113

964

Description: Invalid condition from


drive after a request sense.

964-114

964

Description: Timeout while attempting to


communicate with the SCSI device.

964-120
964-130
964-134
964-135
964-140

D
D
D
D
D

964
964
B88
964
964

Description:
Description:
Description:
Description:
Description:

964-150

964

Description: The Test Unit Ready


command failed. media

964-160

964

Description: The Send Diagnostic


command failed. media

964-161

964

Description: Invalid condition from the


drive after a reserve.
B88

964-163

964

Description: Invalid condition from the


drive after a request sense.
B88

964-164

964

Description: Timeout while attempting


to communicate with the SCSI device. B88

964-165
964-166
964-167
964-168
964-169
964-170
964-180
964-185
964-190
964-200
964-201
964-210
964-211
964-220
964-230
964-240
964-260
964-261
964-300
964-310

D
D
D
D
D
D
D
D
D
D
G
D
D
D
D
D
D
D
D
D

964
964
964
964
964
964
964
964
964
964
964
964
964
964
964
964
964
964
964
B88

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

964-320

964

Description: Error log analysis


indicates a failure. media

964-411
to
964-423

964

Description: A reservation conflict


occurred. software

open in browser PRO version

The
The
The
The
The

Inquiry command failed.


Load command failed. media
adapter failed to configure.software
Unload command failed. media
Mode Select command failed.

Write, Read and Compare Test failed.


Unable to configure the device.software
An unexpected SCSI error occurred.
The adapter failed to configure.
software
The send diagnostic command failed.media
The Read, Write and Compare test failed.media
The Load command failed. media
The Unload command failed. media
The Mode Select command failed.
The Test Unit Ready command failed. media
Error diagnosed from error log analysis.
The device configuration failed. B88
The device open failed. B88
The Release command failed.
The Request Sense command failed.
The Openx command failed.
The device configuration
The device open failed.
The device configuration failed. software
SCSI adapter configuration failed.software

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

964-511
to
964-523

964

964-611
to
964-623

964

Description: An adapter or bus I/O


error occurred. software

964-711
to
964-723

964

Description: A device timeout error


occurred. software

966-101
966-103
966-201
966-203
966-205
966-207
966-208
966-209
966-211
966-213
966-304
966-306
966-310
966-312
966-400
966-402
968-102
968-104
968-105
968-106
968-108
968-110
968-112
968-114

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

966
966
966
996
966
966
190

968-116

968-117
968-118
968-120
968-122
968-124

D
D
D
D
D

968
968
968
968
968

Description:
Description:
Description:
Description:
Description:

968-126

968

Description: A software error was caused


by a hardware failure.

968-128

968

Description: The error log analysis

E22
E23
E22
E23
152
190
968
968
968
968
968
968
968
968

Description: The drive returned bad or


non-extended sense data.

Error in non-interactive tests.


The test pattern failed.
Description: Error in non-interactive tests on card
Description: The test pattern failed.
Description: Test pattern failed
Description: Test pattern failed
Description: Error in non-interactive test on card
Description: Test pattern failed
Test pattern failed
Test pattern failed
Video error in interactive test
Audio error in interactive test
Video error in interactive test
Audio error in interactive test
Error in non-interactive tests
Test pattern failed
Description: An unrecoverable media error.
Description: The motor failed to restart.
Description: The drive did not become ready.
Description: The electronics card test failed.
Description: The bus test failed.
Description: The media format is corrupted.
Description: The diagnostic test failed.
Description: An unrecoverable hardware error.
Description: A protocol error.
Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

A
A
A
A
A

write protect error occurred.


SCSI command time-out.
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

indicates a hardware failure.


968-129

D50

Description: Error log analysis


indicates a SCSI bus problem. 968 B88 software

968-130

968

Description: Error log analysis


indicates a problem reported by the disk
drive's self monitoring function.

968-132
968-134
968-135
968-136

D
D
D
D

968
B88
968
968

Description:
Description:
Description:
Description:

968-137

968

Description: Unit attention condition


has occurred on the Send Diagnostic command

969-110

D67

Description: Residual Data Analysis


indicates memory error.

969-111

D83

Description: Residual Data Analysis


indicates memory error.

969-120

D68

Description: Residual Data Analysis


indicates memory error.

969-121

D84

969-130

D69

Description: Residual Data Analysis


indicates memory error.
.
Description: Residual Data Analysis
indicates memory error.

969-131

D85

Description: Residual Data Analysis


indicates memory error.

969-140

D70

Description: Residual Data Analysis


indicates memory error.

969-141

D86

Description: Residual Data Analysis


indicates memory error.

969-150

E11

Description: Residual Data Analysis


indicates memory error.

969-151

E14

Description: Residual Data Analysis


indicates memory error.

969-206

D72

Description: Residual Data Analysis


indicates memory error.

969-208

D73

Description: Residual Data Analysis


indicates memory error.

969-210

D71

Description: Residual Data Analysis


indicates memory error.

open in browser PRO version

A disk drive hardware error occurred.


The adapter failed to configure.software
The device failed to configure.software
The certify operation failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

indicates memory error.


969-211

D87

Description: Residual Data Analysis


indicates memory error.

969-212

E12

Description: Residual Data Analysis


indicates memory error.

969-220

D72

Description: Residual Data Analysis


indicates memory error.

969-221

D88

Description: Residual Data Analysis


indicates memory error.

969-230

D73

Description: Residual Data Analysis


indicates memory error.

969-231

D89

Description: Residual Data Analysis


indicates memory error.

969-240

D74

Description: Residual Data Analysis


indicates memory error.

969-241

D90

Description: Residual Data Analysis


indicates memory error.

969-250

E12

Description: Residual Data Analysis


indicates memory error.

969-251

E15

Description: Residual Data Analysis


indicates memory error.

969-310

D75

Description: Residual Data Analysis


indicates memory error.

969-311

D91

Description: Residual Data Analysis


indicates memory error.

969-320

D76

Description: Residual Data Analysis


indicates memory error.

969-321

D92

Description: Residual Data Analysis


indicates memory error.

969-330

D77

Description: Residual Data Analysis


indicates memory error.

969-331

D93

Description: Residual Data Analysis


indicates memory error.

969-340

D78

Description: Residual Data Analysis


indicates memory error.

969-341

D94

Description: Residual Data Analysis


indicates memory error.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

969-350

E13

Description: Residual Data Analysis


indicates memory error.

969-351

E16

Description: Residual Data Analysis


indicates memory error.

969-600

969-701
969-702
969-703

D
D
D

814
151
817

Description: NVRAM test failed


Description: Time of Day Battery test failed
Description: Time of Day Chip test failed

969-800

221

Description: Memory problems indicate


System Planar failure

969-900
970-098
970-099

G
J
J

D01
970
970

Description: L2 cache test failed


Description: Tape drive indicates an error.
Description: Tape drive not found.

970-101

970

Description: Timeout while attempting to


communicate with SCSI device.

970-102

970

Description: The SCSI device indicates busy.

970-103

970

Description: The SCSI device indicates a


reservation conflict.

970-104

970

Description: The SCSI device indicates a


check condition.

970-105

970

Description: An error is detected in


request sense data.

970-107

970

Description: Sense data from the SCSI


drive has unexpected data.

970-110

970

Description: The Reserve command failed.

970-111

970

Description: Invalid condition from the


drive after a reserve.

970-112

970

Description: The write protect sensor test failed.

970-113

970

Description: Invalid condition from


drive after a request sense.

970-114

970

Description: Residual Data Analysis


indicates memory error or unsupported memory.
Action: Examine the memory modules and
determine if they are supported types. If
the modules are supported, then replace
the appropriate memory module(s). Use
Chapter 14. "MAP 0240: Memory Problem
Resolution".

open in browser PRO version

Description: Timeout while attempting to


Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

970-114

970

Description: Timeout while attempting to


communicate with the SCSI device.

970-120
970-130
970-134
970-135
970-140
970-150
970-160

D
D
D
D
D
D
D

970
970
B88
970
970
970
970

Description:
Description:
Description:
Description:
Description:
Description:
Description:

970-161

970

Description: Invalid condition from the


drive after a reserve.

970-163

970

Description: Invalid condition from the


drive after a request sense.

970-164

970

Description: Timeout while attempting to


communicate with the SCSI device.

970-165
970-166
970-167
970-168
970-169
970-170
970-180
970-185
970-190
970-200
970-201
970-210
970-211
970-220
970-230
970-240
970-260
970-261
970-300
970-310
970-320

D
D
D
D
D
D
D
D
D
D
G
D
D
D
D
D
D
D
D
D
G

970
970
970
B88
970
970
970
970
970
970
970
970
970
970
970
970
970
970
970
B88
970

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

970-411
to
970-423

970
Description: A reservation conflict
B88
software

970-511
to
970-523

970

970-611
to
970-623

970-711

970
B88
software
970

open in browser PRO version

The
The
The
The
The
The
The

Inquiry command failed.


Load command failed. media
adapter failed to configure.software
Unload command failed. media
Mode Select command failed.
Test Unit Ready command failed.media
Send Diagnostic command failed.media

Write, Read and Compare Test failed.


Unable to configure the device.software
An unexpected SCSI error occurred.
The adapter failed to configure. software
The send diagnostic command failed. media
The Read, Write and Compare test failed.
The Load command failed.
media
The Unload command failed. media
The Mode Select command failed.
The Test Unit Ready command failed. media
Error diagnosed from error log analysis.
The device configuration failed.
The device open failed.
The Release command failed.
The Request Sense command failed.
The Openx command failed.
The device configuration failed.
The device open failed.
The device configuration failed.software
SCSI adapter configuration failed.software
Error log analysis indicates a failure. media
occurred.

Description: The drive returned bad or


non-extended sense data.
Description: An adapter or bus I/O error occurred.

Description: A device timeout error occurred.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

to
970-723

B88
software

971-098
971-099

J
J

971
971

Description: Tape drive indicates an error.


Description: Tape drive not found.
B88

971-101

971

Description: Timeout while attempting to


communicate with SCSI device.

971-102

971

Description: The SCSI device indicates busy.

971-103

971

Description: The SCSI device is


indicating a reservation conflict.

971-104

971

Description: The SCSI device indicates a


check condition.

971-105

971

Description: Sense data from the SCSI


device shows an error.

971-107

971

Description: The SCSI drive returned


unexpected sense data.

971-110

971

Description: The Reserve command failed.

971-111

971

Description: Invalid condition from the


drive after a reserve.

971-112

971

Description: The write protect sensor test failed.

971-113

971

Description: Invalid condition from the


drive after a request sense.

971-114

971

Description: Timeout while attempting to


communicate with the SCSI device.

971-120
971-130
971-135
971-140
971-150
971-160
971-161

D
D
D
D
D
D
D

971
971
971
971
971
971
971

Description: The Inquiry command failed.


Description: The Load command failed. media
Description: The Unload command failed. media
Description: The Mode Select command failed.
Description: The Test Unit Ready command failed.media
Description: The Send Diagnostic command failed.media
Description: Invalid condition from the
drive after a reserve.

971-163

971

Description: Invalid condition from the


drive after a request sense.
B88

971-164

971

Description: Timeout while attempting to


communicate with the SCSI device.
B88

971-165
971-166
971-167
971-168

D
D
D
D

971
971
971
B88

Description:
Description:
Description:
Description:

open in browser PRO version

Write, Read and Compare Test failed.


Unable to configure the device.software
An unexpected SCSI error occurred.
The adapter failed to configure.software

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

971-168
971-169
971-170
971-180
971-185
971-190
971-200
971-201
971-210
971-211
971-220
971-230
971-240
971-260
971-261
971-300
971-310

D
D
D
D
D
D
D
G
D
D
D
D
D
D
D
D
D

B88
971
971
971
971
971
971
971
971
971
971
971
971
971
971
971
B88

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

971-320

971

Description: Error log analysis


indicates a failure.media

971-411
to
971-423

971
B88

Description: A reservation conflict occurred.


software

971-511
to
971-523

971

Description: The drive returned bad or


non-extended sense data.

971-611
to
971-623

971

Description: An adapter or bus I/O error


occurred.
software

971-711
to
971-723

971

Description: A device timeout error


occurred.
B88
software

972-101

972

Description: Timeout while attempting to


communicate with SCSI device.

972-102

972

Description: The SCSI device indicates busy.

972-103

972

Description: The SCSI device indicates a


reservation conflict.

972-104

972

Description: The SCSI device indicates a


check condition.

972-105

972

Description: An error is detected in


request sense data.

972-107

972

Description: The drive has returned


unexpected sense data.

972-110

972

Description: The Reserve command failed.

open in browser PRO version

The adapter failed to configure.software


The Send Diagnostic command failed.media
The Read, Write and Compare test failed.media
The Load command failed. media
The Unload command failed. media
The Mode Select command failed.
The Test Unit Ready command failed.
An error is diagnosed from the error log analysis.
The device configuration failed.
The device open test failed.
The Release command failed.
The Request Sense command failed.
The Openx command failed.
The device configuration failed.
The device open test failed.
The device configuration failed. software
SCSI adapter configuration failed.software

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

972-111

972

Description: Invalid condition from the


drive after a reserve.

972-112

972

Description: The write protect sensor


test failed.

972-113

972

Description: Invalid condition from the


drive after a request sense.

972-114

972

Description: Timeout while attempting to


communicate with the SCSI device.

972-120
972-130
972-135
972-140
972-150
972-160

D
D
D
D
D
D

972
972
972
972
972
972

Description:
Description:
Description:
Description:
Description:
Description:

972-161

972

Description: Invalid condition from the


drive after a reserve.
B88

972-163

972

Description: Invalid condition from the


drive after a request sense.
B88

972-164

972

Description: Timeout while attempting


communication with SCSI device. B88
276

972-165
972-166
972-167
972-168
972-169
972-170
972-180
972-185
972-190
972-200
972-201
972-210
972-211
972-220
972-230
972-240
972-260
972-261
972-300
972-310
972-320

D
D
D
D
D
D
D
D
D
D
G
D
D
D
D
D
D
D
D
D
G

972
972
972
B88
972
972
972
972
972
972
972
972
972
972
972
972
972
972
972
B88
972

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

972-411
to
972-423

972
B88

open in browser PRO version

The
The
The
The
The
The

Inquiry command failed.


Load command failed. media
Unload command failed. media
Mode Select command failed.
Test Unit Ready command failed.media
Send Diagnostic command failed.media

Write, Read and Compare Test failed.


Unable to configure the device.software
An unexpected SCSI error occurred.
The adapter failed to configure.software
The send diagnostic command failed.media
The Read, Write and Compare test failed.media
The Load command failed. media
The Unload command failed. media
The Mode Select command failed.
The Test Unit Ready command failed.media
An error is diagnosed from the error log analysis.
The device configuration failed.
The device open test failed.
The Release command failed.
The Request Sense command failed.
The Openx command failed.
The device configuration test failed.
The device open test failed.
The device configuration failed.software
SCSI adapter configuration failed.software
Error log analysis indicates a failure. media

Description: A reservation conflict


occurred.
software

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

972-511
to
972-523

972

Description: The drive returned bad or


non-extended sense data.

972-611
to
972-623

972-711
to
972-723

973-110
973-120
973-130
973-135
973-140
973-150
973-160
973-169
973-170
973-180
973-185
973-190
973-200
973-210
973-220
973-230
973-240
973-300
973-310

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

973
973
973
973
973
973
973
973
973
973
973
973
973
973
973
973
973
973
B88

Description: The Reserve command failed.


Description: The Inquiry command failed.
Description: The Load command failed.
media
Description: The Unload command failed. media
Description: The Mode Select command failed.
Description: The Test Unit Ready command failed. media
Description: The Send Diagnostic command failed.media
Description: The send diagnostic command failed. media
Description: The Read, Write and Compare test failed.
Description: The Load command failed.
media
Description: The Unload command failed. media
Description: The Mode Select command failed.
Description: The Test Unit Ready command failed.media
Description: The device configuration failed.
Description: The Release command failed.
Description: The Request Sense command failed.
Description: The Openx command failed.
Description: The device configuration failed.software
Description: SCSI adapter configuration failed.software

973-320

973

Description: Error log analysis


indicates a failure.
media

973-411
to
973-423

973

Description: A reservation conflict


occurred.
software

973-511
to
973-523

973-611
to
973-623

973-711
to
973-723

974-111
974-112
974-113

D
D
D

B88
972
B88
972
B88

B88
973

Description: An adapter or bus I/O error


occurred.
software
Description: A device timeout error
occurred.
software

Description: The drive returned bad or


non-extended sense data.

B88
973
B88
973
B88
974
974
974

open in browser PRO version

Description: An adapter or bus I/O error


occurred.
software
Description: A device timeout error
occurred.
software
Description: Unable to reserve device. B88
Description: Unable to do configuration.
Description: Unable to open the device driver.

Are you a developer? Try out the HTML to PDF API

B88

pdfcrowd.com

974-121
974-122
974-123
974-125
974-126
974-127
974-128
974-129
974-150
974-151

D
D
D
D
D
D
D
D
D
D

974
974
974
974
974
974
974
974
Media
974

974-152

974

Description: A command reservation


conflict was detected.

974-162
974-171
974-172
974-173

D
D
D
D

974
974
974
974

Description:
Description:
Description:
Description:

The CD-ROM drive indicates an error.


Unable to reserve device.
Unable to do configuration.
Unable to open device driver.

974-175
974-198
974-199
974-211
974-281
974-301

D
D
D
D
D
G

974
974
974
974
974
974

Description:
Description:
Description:
Description:
Description:
Description:

The CD-ROM drive indicates an error.


Undefined error detected.
B88
Undefined error detected.
The LED test failed.
No tone during audio test.
Errors found during ELA.

974-302

974

Description: Errors log analysis


indicates hardware failure.
B88

981-102
981-104
981-105
981-106
981-108
981-110
981-112
981-114

D
D
D
D
D
D
D
D

981-116

981-117
981-118
981-120
981-122
981-124

D
D
D
D
D

981
981
981
981
981

Description:
Description:
Description:
Description:
Description:

981-126

981

Description: A software error was


caused by a hardware failure.

981-128

981

981
981
981
981
981
981
981
981

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

The CD-ROM drive indicates an error.


The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
A media error was detected.
A command timeout was detected.

An unrecoverable media error.


The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

A
A
A
A
A

write protect error occurred.


SCSI command time-out.
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error.

Description: The error log analysis


Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

981-128

981

Description: The error log analysis


indicates a hardware failure.

981-129

D50

Description: Error log analysis


indicates a SCSI bus problem. 981 B88 software

981-130

981

Description: Error log analysis


indicates a problem reported by the disk
drive's self monitoring function.

981-132
981-134
981-136

D
D
D

981
B88
981

Description: A disk drive hardware error occurred.


Description: The adapter failed to configure.software
Description: The certify operation failed.

981-137

981

Description: Unit attention condition


has occurred on the Send Diagnostic command

984-102
984-104
984-105
984-106
984-108
984-110
984-112
984-114

D
D
D
D
D
D
D
D

984
984
984
984
984
984
984
984

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

984-116

984-117
984-118
984-120
984-122
984-124

D
D
D
D
D

984
984
984
984
984

Description:
Description:
Description:
Description:
Description:

984-126

984

Description: A software error was caused


by a hardware failure. B88

984-128

984

Description: The error log analysis


indicates a hardware failure.

984-129

D50

Description: Error log analysis


indicates a SCSI bus problem.

984-130

984

Description: Error log analysis


indicates a problem reported by the disk
drive's self monitoring function.

984-132
984-134

D
D

984
B88

Description: A disk drive hardware error occurred.


Description: The adapter failed to configure. software

An unrecoverable media error.


The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

A
A
A
A
A

write protect error occurred.


SCSI command time-out. B88
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

984-137

984

Description: Unit attention condition


has occurred on the Send Diagnostic command.

986-102
986-104
986-105
986-106
986-108
986-110
986-112
986-114

D
D
D
D
D
D
D
D

986
986
986
986
986
986
986
986

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

986-116

986-117
986-118
986-120
986-122
986-124

D
D
D
D
D

986
986
986
986
986

Description:
Description:
Description:
Description:
Description:

986-126

986

Description: A software error was caused


by a hardware failure.

986-128

986

Description: The error log analysis


indicates a hardware failure.

986-129

D50

Description: Error log analysis


indicates a SCSI bus problem. 986

An unrecoverable media error.


The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.
A
A
A
A
A

write protect error occurred.


SCSI command time-out.
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error.

B88

software

986-130

986

Description: Error log analysis


indicates a problem reported by the disk
drive's self monitoring function.

986-132
986-134
986-136

D
D
D

986
B88
986

Description: A disk drive hardware error occurred.


Description: The adapter failed to configure. software
Description: The certify operation failed.

986-137

986

Description: Unit attention condition


has occurred on the Send Diagnostic command.

987-111
987-112
987-113
987-121
987-122
987-123
987-125
987-126
987-127
987-128

D
D
D
D
D
D
D
D
D
D

987
987
987
987
987
987
987
987
987
987

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

open in browser PRO version

Unable to reserve device.


Unable to do configuration.
Unable to open the device driver.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.
The CD-ROM drive indicates an error.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

987-128
987-129
987-150
987-151
987-152
987-162
987-171
987-172
987-173
987-175
987-198
987-199
987-211
987-281
987-301
987-302
989-102
989-104
989-105
989-106
989-108
989-110
989-112
989-114

D
D
D
D
D
D
D
D
D
D
D
D
D
D
G
G
D
D
D
D
D
D
D
D

987
987
Media
987
987
987
987
987
987
987
987
987
987
987
987
987
989
989
989
989
989
989
989
989

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

The CD-ROM drive indicates an error.


The CD-ROM drive indicates an error.
A media error was detected.
A command timeout was detected.
A command reservation conflict was detected.
The CD-ROM drive indicates an error.
Unable to reserve device.
Unable to do configuration.
Unable to open device driver.
The CD-ROM drive indicates an error.
Undefined error detected.
Undefined error detected.
The LED test failed.
No tone during audio test.
Errors found during ELA.
Errors found during ELA.
An unrecoverable media error
The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
A non-recoverable hardware error

989-116

989-117
989-118
989-120
989-122
989-124

D
D
D
D
D

989
989
989
989
989

Description:
Description:
Description:
Description:
Description:

989-126

989

Description: A software error was caused


by a hardware failure.

989-128

989

Description: The error log analysis


indicates a hardware failure.

989-129

D50

Description: Error log analysis


indicates a SCSI bus problem.software

989-130

989

Description: Error log analysis


indicates a problem reported by the disk
drive's self monitoring function.

989-132
989-134
989-135
989-136

D
D
D
D

989
B88
989
989

Description:
Description:
Description:
Description:

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

open in browser PRO version

A
A
A
A
A

write protect error occurred.


SCSI command time-out.
SCSI busy or command error.
SCSI reservation conflict error
SCSI check condition error

A disk drive hardware error occurred.


The adapter failed to configure.software
The device failed to configure.software
The certify operation failed.

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

989-137

989

Description: Unit attention condition


has occurred on the Send Diagnostic command.

990-102
990-104
990-105
990-106
990-108
990-110
990-112
990-114

D
D
D
D
D
D
D
D

990
990
990
990
990
990
990
990

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

990-116

990-117
990-118
990-120
990-122
990-124

D
D
D
D
D

990
990
990
990
990

Description:
Description:
Description:
Description:
Description:

990-126

990

Description: A software error was caused


by a hardware failure.

990-128

990

Description: The error log analysis


indicates a hardware failure.

990-129

D50

Description: Error log analysis


indicates a SCSI bus problem. software

990-130

990

Description: Error log analysis


indicates a problem reported by the disk
drive's self monitoring function.

990-132
990-134
990-136

D
D
D

990
B88
990

Description: A disk drive hardware error occurred.


Description: The adapter failed to configure.software
Description: The certify operation failed.

990-137

990

Description: Unit attention condition


has occurred on the Send Diagnostic
command.
D50

An unrecoverable media error.


The motor failed to restart.
The drive did not become ready.
The electronics card test failed.
The bus test failed.
The media format is corrupted.
The diagnostic test failed.
An unrecoverable hardware error.

Description: A protocol error.


Action: Check the levels of the device,
adapter, diagnostic software, and
application software to be sure they are
all compatible. If you do not find a
problem, call your support person.

B88

A
A
A
A
A

write protect error occurred.


SCSI command time-out.
SCSI busy or command error.
SCSI reservation conflict error.
SCSI check condition error.

991-101

991

Description: Timeout while attempting to


communicate with SCSI device.

991-102

991

Description: The SCSI device indicates busy.

991-103

991

Description: The SCSI device is


indicating a reservation conflict.

991-104

991

open in browser PRO version

Description: The SCSI device indicates a


Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

991-104

991

Description: The SCSI device indicates a


check condition.

991-105

991

Description: Sense data from the SCSI


device shows an error.

991-107

991

Description: The SCSI drive returned


unexpected sense data.

991-110
991-111

D
D

991
991

Description: The Reserve command failed.


Description: Invalid condition from the
drive after a reserve.

991-112

991

Description: The write protect sensor


test failed.

991-113

991

Description: Invalid condition from the


drive after a request sense.

991-114

991

Description: Timeout while attempting to


communicate with the SCSI device.

991-120
991-130
991-135
991-140
991-150
991-160

D
D
D
D
D
D

991
991
991
991
991
991

Description:
Description:
Description:
Description:
Description:
Description:

991-161

991

Description: Invalid condition from the


drive after a reserve.
B88

991-163

991

Description: Invalid condition from the


drive after a request sense.
B88

991-164

991

Description: Timeout while attempting to


communicate with the SCSI device. B88

991-165
991-166
991-167
991-168
991-169
991-170
991-180
991-185
991-190
991-200

D
D
D
D
D
D
D
D
D
D

991
991
991
B88
991
991
991
991
991
991

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

991-201

991

Description: An error is diagnosed from


the error log analysis.
B88

991-210
991-211
991-220

D
D
D

991
991
991

Description: The device configuration failed.


Description: The device open test failed.
Description: The Release command failed.

open in browser PRO version

The
The
The
The
The
The

Inquiry command failed.


Load command failed. media
Unload command failed. media
Mode Select command failed.
Test Unit Ready command failed. media
Send Diagnostic command failed.media

Write, Read and Compare Test failed.


The device failed to configure.software
An unexpected SCSI error occurred.
The adapter failed to configure.software
The send diagnostic command failed.
The Read, Write and Compare test failed.media
The Load command failed.
media
The Unload command failed. media
The Mode Select command failed.
The Test Unit Ready command failed. media

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

991-230
991-240
991-260
991-261
991-300
991-310

D
D
D
D
D
D

991
991
991
991
991
B88

Description:
Description:
Description:
Description:
Description:
Description:

991-320

991

Description: Error log analysis


indicates a failure.media

991-411
to
991-423

991

Description: A reservation conflict


occurred.
software

991-511
to
991-523

991-611
to
991-623

991-711
to
991-723

994-110
994-120
994-130
994-135
994-140
994-150
994-160
994-169
994-170
994-180
994-185
994-190
994-200
994-210
994-220
994-230
994-240
994-300
994-310
994-320

B88
991

The Request Sense command failed.


The Openx command failed.
The device configuration failed.
The device open test failed.
The device configuration failed.software
SCSI adapter configuration failed.software

Description: The drive returned bad or


non-extended sense data.

B88
991
B88
991

Description: An adapter or bus I/O error


occurred.
software

B88

Description: A device timeout error


occurred.
software

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
G

994
994
994
994
994
994
994
994
994
994
994
994
994
994
994
994
994
994
B88
994

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

994-411
to
994-423

994

Description: A reservation conflict


occurred.
software

994-511
to
994-523

B88
994

The Reserve command failed.


The Inquiry command failed.
The Load command failed. media
The Unload command failed. media
The Mode Select command failed.
The Test Unit Ready command failed.media
The Send Diagnostic command failed.media
The send diagnostic command failed.media
The Read, Write and Compare test failed.
The Load command failed. media
The Unload command failed. media
The Mode Select command failed.
The Test Unit Ready command failed.media
The device configuration failed.
The Release command failed.
The Request Sense command failed.
The Openx command failed.
The device configuration failed.software
SCSI adapter configuration failed.software
Error log analysis indicates a failure.media

Description: The drive returned bad or


non-extended sense data.

B88

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

994-611
to
994-623

994

994-711
to
994-723

994
B88

Description: A device timeout error


occurred.
software

995-110
995-120
995-130
995-135
995-140
995-150
995-160
995-169
995-170
995-180
995-185
995-190
995-200
995-210
995-220
995-230
995-240
995-300
995-310
995-320

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
G

995
995
995
995
995
995
995
995
995
995
995
995
995
995
995
995
995
995
B88
995

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

995-411
to
995-423

995

Description: A reservation conflict


occurred.
software

995-511
to
995-523

995-611
to
995-623

995-711
to
995-723

998-110
998-120
998-130
998-135
998-140
998-150
998-160
998-169
998-170

D
D
D
D
D
D
D
D
D

B88

B88
995

Description: An adapter or bus I/O error


occurred.
software

The Reserve command failed.


The Inquiry command failed.
The Load command failed. media
The Unload command failed. media
The Mode Select command failed.
The Test Unit Ready command failed.media
The Send Diagnostic command failed.media
The send diagnostic command failed.media
The Read, Write and Compare test failed.media
The Load command failed. media
The Unload command failed. media
The Mode Select command failed.
The Test Unit Ready command failed. media
The device configuration failed. B88
The Release command failed.
The Request Sense command failed.
The Openx command failed.
The device configuration failed.software
SCSI adapter configuration failed.software
Error log analysis indicates a failure.media

Description: The drive returned bad or


non-extended sense data.

B88
995
B88
995

Description: An adapter or bus I/O error


occurred.
software

B88

Description: A device timeout error


occurred.
software

998
998
998
998
998
998
998
998
998

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

open in browser PRO version

The
The
The
The
The
The
The
The
The

Reserve command failed.


Inquiry command failed.
Load command failed. media
Unload command failed. media
Mode Select command failed.
Test Unit Ready command failed.media
Send Diagnostic command failed.media
send diagnostic command failed.media
Read, Write and Compare test failed.media

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

998-180
998-185
998-190
998-200
998-210
998-220
998-230
998-240
998-300
998-310
998-320

D
D
D
D
D
D
D
D
D
D
G

998
998
998
998
998
998
998
995
995
B88
995

Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Description:

998-411
to
998-423

998

Description: A reservation conflict


occurred.
software

998-511
to
998-523

998-611
to
998-623

998-711
to
998-723

999-xxx

9CC-1xx

9CC-xxx

xxx

Description: I/O Bus Data, Address


Parity Error, or Time-out error.
Note: xxx represents the last 3 digits of
the SRN.

xxxxxxxx

none

Description: Refer to the Error Code to


FRU Index in the system unit's service
guide.
Action: Use the "Error Code to FRU Index"
in the service guide.

B88
998

The Load command failed. media


The Unload command failed. media
The Mode Select command failed.
The Test Unit Ready command failed.media
The device configuration failed.
The Release command failed.
The Request Sense command failed.
The Openx command failed.
The device configuration failed.software
SCSI adapter configuration failed.software
Error log analysis indicates a failure.media

Description: The drive returned bad or


non-extended sense data.

B88
998
B88
998
B88
999

Description: An adapter or bus I/O error


occurred.
software
Description: A device timeout error
occurred.
software
Description: A 7137 or 3514 disk array series
subsystem problem is indicated.
Action: Use 7137 or 3514 documentation.
Description: I/O Error on PCI bus.
Note: xx represents the last 2 digits of
the SRN.

Common Error Codes


E1F1 on LED front of the box
open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

Likely that there was one of three things that could be causing he problem...
1) There is media loaded that contains a faulty BLV
2) The bootlist does contain the device that contains a BLV
3) The BLV is corrupt and will have to be rebuilt
4) Hardware failure on the correct boot device

Machine boots up with a 4b2b2405


This error code is a service processor error code dictating that there
is a problem with the wire test that occurs at IPL with the
500Mhz 2-way proc. Call IBM SERV.

f1e
Additional Information on where to check first.
The PowerPC 604e processor has 32KB of instruction and data cache plus an additional
1MB of L2 cache to provide even greater power.
The cache is on the 604e proc
I would try the instruction and data cache
The proc or the removable cache that is on the proc There is a fixed 32kb cache
and then a removable (1mb old) 2mb cache chip
This is probably what is bad on this machine based on f1e.

open in browser PRO version

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

Microsoft Dynamics CRM


microsoft.com/Dynamics
Sponsored by

open in browser PRO version

Works Offline, Syncs w/ Sharepoint Works with Office. Try Free!

Are you a developer? Try out the HTML to PDF API

pdfcrowd.com

Potrebbero piacerti anche