Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Alum
1. Product Identification
Item Name: aluminum sulfate, hydrated, technical
2. Composition/lnformation on Ingredients
Ingredient: aluminum sulfate (sara iii)
Percent: 100
NIOSH (RTECS) Number: bd1700000
CAS Number: 10043-01-3
OSHA PEL: 2 mg/m3
ACGIH TLV: 2 mg/m3;9192
3. Hazards Identification
Signs/Symptoms of Overexposure: irritation of eyes, skin, and intestines.
Emergency/First Aid Procedure: eyes: flush with water for at least 15 minutes.
Skin: flush vigorously with water. Ingestion: if victim is conscious, dilute by drinking
large quantities of water; get prompt medical attention.
4. First Aid Measures
Flash Point: non-combustible
5. Handling and storage
Steps if Material is Released/Spilled: use proper personal protective equipment. Sweep
up and recover in a suitable container, or dilute with water and recover it for disposal.
Care should be taken because aluminum sulfate becomes slippery when wet.
Waste Disposal Method: consult local authorities. Disposal must be in accordance with
local, state and federal regulations. Precautions-handling/storing: store in cool and dry
place. Bulk handling system should be weather tight and have dust collectors installed.
Other precautions: avoid skin and eyes contact. Do not breathe dust.
6. Exposure Controls/Personal Protection
Respiratory Protection: dust mask/dust respirator
Ventilation: mech (gen) or local exhaust that provides adequate ventilation
Protective Gloves: rubber
Eye Protection: goggles/face shield
Other Protective Equipment: full protective clothing, safety shower, eye wash station
Suppl. Safety & Health Data: MSDS undated