Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Catalogue 2014
ANTARES Datensysteme GmbH
y s
l
i
m
Fa
robe
P rvoir P
R
A
SH
Rese
The ANTARES
le
Ho
m
i
l
S
www.antares-geo.de
Conrad Blumhagen
Business Development Director
ANTARES Datensysteme GmbH
ANTARES 2014
New !
2 1/2 " Quad Combo
SHARP Instruments
GR
SGR
Density
Neutron
Resistivity
Acoustic
Caliper
Standard Rating
Temperature 175C
Pressure 140 MPa
ANTARES 2014
Telemetry / GR / CCL
The ANTARES 0928 Digital Telemetry instrument handles the communication between the ALADIN
surface system and ANTARES digital downhole instruments in both directions. It also monitors the
temperature of the telemetry electronics and the cable head voltage.
The tool includes a Gamma Ray scintillation detector, measuring the total gamma rays emitted by the
surrounding formation and a Casing Collar Locator. The Gamma Ray Log (GR) can be ran in open and
cased holes, in all mud systems and in dry holes. For cased hole operations, a CCL is also part of the
tool.
Specifications
Diameter:
Length:
Weight:
63.5 mm
(2.5")
1,080 mm
(42.5")
22 kg
(48.5 lbs)
Max. Temp:
Max. Pressure:
175C
(350F)
140 MPa (20,000 psi)
GR
CCL
(8.7)
(34.6)
Top Connector:
ANTARES
Bottom Connector: ANTARES Toolbus
Measuring Parameters
Measuring Range:
GR:
CCL:
0 to 3000 gAPI
single casing string
Accuracy*:
GR:
+ 5 % of measured values*
* Gamma Ray measurements are radioactive measurements and hence subject to statistical variations.
On a log, these variations between other factors depend on logging speed and filter strength.
Logging parameters
Recommended:
Min. Hole Diameter: 100 mm
Max Hole Diameter: NA
(4")
Recommended:
Logging Speed GR:
Sample Rate:
9 m/min
(1800 ft/hour)
selectable
Gamma Ray
Casing Collar Locator
Cable Head Voltage
Electronics Temperature
Combinability
With ANTARES SHARP family of 2 " open hole tools.
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
ANTARES 2014
63.5 mm
1,700 mm
24 kg
(2.5")
(66.9)
(53 lbs)
Max. Temp:
Max. Pressure:
175C
(350F)
140 MPa (20,000 psi)
(13)
0...3000 keV,
256 Channels
Measuring Parameters:
Measuring Range:
GR
K
U
Th
Accuracy*:
GR
0...3000 APi
0...50 %
0...500 ppm
0...500 ppm
K, U, Th
+ 3 % of measured
values*
+ 4 % of measured
values*
Logging Parameters
Recommended
Min. Hole Diameter: 100 mm
Max Hole Diameter: NA
(4)
Recommended
Logging Speed: 3-6 m/min
590 - 1200 ft/hr
Sample Rate: selectable
Gamma Radiation
Potassium Content
Thorium Content
Uranium Content
Potassium plus Thorium Content
Chi-Square - a measure for the quality of the spectrum Stripping
result
RThK
Ration between Thorium and Potassium Content
RThU
Ration between Thorium and Uranium Content
RUK
Ration between Uranium and Potassium Content
FlaskTemp C / F Flask Temperature
Combinability
With ANTARES SHARP family of 2 " open hole tools.
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
ANTARES 2014
Compensated Neutron
The ANTARES 1483 Compensated Neutron instrument works with an Americium Beryllium source
and two detectors. The source emits high energy neutrons which undergo scattering in the formation,
lose energy and produce gamma rays. The thermal neutrons are measured by the two detectors in the
tool.
The tool can be ran in both open and cased holes and in most types of mud. In order to minimize the
borehole effects, the tool is run decentralized.
Specifications
Diameter:
Length:
Weight:
63.5 mm
2,390 mm
30 kg
(2.5")
(94)
(66 lbs)
Max. Temp:
Max. Pressure:
175C
(350F)
140 MPa (20,000 psi)
241AmBe
Source Type:
Detector Type:
He-3
Number of Detectors: 2
Measuring Parameters
Accuracy: + 1 pu (for 0-10 pu)
+ 7% of recorded value
(above 10 pu)
Logging parameters
Recommended
Min. Hole Diameter: 100 mm
Max. Hole Diameter:380 mm
(4)
(15)
Recommended
Logging Speed:
6 m/min
(1200 ft/hr)
Combinability
With ANTARES SHARP family of 2 " open hole tools.
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
ANTARES 2014
Pe Density
The ANTARES 1482 Pe Spectrum Density instrument includes a pad with a Cesium source emitting
gamma rays and two detectors. From the energy spectrum and count rates of the two counters, the
borehole compensated formation bulk density and a photo electric absorption index are calculated.
A caliper measurement is provided, permitting compensation for borehole effects. The pad device tool
can be run in any mud except in barite mud, which absorbs the Gamma Rays and therefore affects the
density reading heavily. A Correction Curve indicates the influence of the borehole rugosity.
Specifications
Diameter (max):
Length:
Weight:
82 mm
(3.25")
3,590 mm
(142)
55 kg
(120 lbs)
Max. Temp:
Max. Pressure:
175C
(350F)
140 MPa (20,000 psi)
Source Type:
Detector Type:
No of Detectors:
137
Cs
NaI Scintillation
Crystal
2
(42)
(54)
(42)
Measuring Parameters
Measuring Range:
DEN:
1-3 g/cm3
PE:
0-10 B/e
Caliper:
100-380 mm (4-15)
Accuracy*:
DEN 0.02 g/cm3
(for 2 - 3 g/cm3 formation
density)
Logging parameters
Recommended
Min. Hole Diameter: 113 mm
Max Hole Diameter: 380 mm
(4.5)
(15)
Recommended
Logging Speed:
6 m/min
(1200 ft/hr)
DNC in g/cm
COR in g/cm3
PEC in B/e
Caliper in mm or in
Combinability
With ANTARES SHARP family of 2 " open hole tools.
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
ANTARES 2014
63.5 mm
3,940 mm
56 kg
(2.5")
(156)
(123 lbs)
Max. Temp:
Max. Pressure:
175C
(350F)
140 MPa (20,000 psi)
(3 ft)
(2 ft)
(3 ft)
Measuring Parameters
Measuring Range:
DT:
100-800 s/m
(35-250 s/ft)
Accuracy
DT*:
+ 3 s/m
(+1s/ft)
borehole
Logging parameters
Recommended
Min. Hole Diameter:100 mm
Max Hole Diameter: 400 mm
(4)
(16)
Recommended
Logging Speed:
6-15 m/min
1200- 3000 ft/hr
Delta Time
Acoustic Travel
Times
Integrated Total
Trace
information
Combinability
With ANTARES SHARP family of 2 " open hole tools.
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
ANTARES 2014
63.5 mm
2,120 mm
20 kg
(2.5")
(83.5")
(44 lbs)
Max. Temp:
Max. Pressure:
150C
(300F)
100 MPa (15,000 psi)
Transmitters:
Receivers:
(27)
(19)
Measuring Parameters
Measuring Range:
CILD (Deep), CILM (Medium):
10 mS/m - 2000 mS/m (mmho)
Accurracy:
CILD (Deep), CILM (Medium):
10 mS/m (mmho): +/- 25%
2000 mS/m (mmho): +/- 5%
Logging parameters
Recommended
Min. Hole Diameter: 100 mm
Max Hole Diameter: 250 mm
(4)
(10)
Recommended
Logging speed:
Combinability
With Antares SHARP family of 2 " open hole tools. Must be lowest tool in string.
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
ANTARES 2014
Dual Laterolog
The 1147 ANTARES Dual Laterolog instrument is designed to measure formation resistivities in
boreholes with conductive mud systems. An array of electrodes in the tool together with IsoSubs are
configured to achieve resistivity measurements with two different depths of investigation (Deep and
Shallow Laterolog resistivities). The return electrodes are positioned far away from the emitting
electrodes in the toolstring to allow for deep penetration of the formation. No weak bridle is required.
A Spontaneous Potential is also measured.
Specifications
Diameter:
Length :
(w/ bot. elec)
Weight:
63.5 mm
6900 mm
Max. Temp:
Max. Pressure:
175C
(350F)
140 MPa (20,000 psi)
80 kg
(2.5")
(271")
(178 lbs)
Sensor:
Electrode Array
Measure Points
from bottom, base config:
Rdeep, RShallow 3,990 mm
(157")
(508")
Measuring Parameters
Measuring Range:
DLL
0 to 40,000 Ohmm
SP
-1000 mV to 1000 mV
Accuracy:
DLL:
SP:
+5%
(between 0.2 and
2000 Ohmm)
+ 10 %
Logging parameters
Recommended
Min. Hole Diameter: 100 mm
Max. Hole Diameter: 250 mm
(4)
(10)
Recommended
Logging Speed:
25 m/min*
(5000 ft/h)
Deep Resistivity
Shallow Resistivity
Spontaneous Potential
Combinability
With ANTARES SHARP family of 2 " open hole tools.
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
ANTARES 2014
63.5 mm
1335 mm
15 kg
(2.5")
(52.5")
(33 lbs)
Max. Temp:
Max. Pressure:
175C
(350F)
140 MPa (20,000 psi)
Sensors:
Magneto Resistivity
Angle Sensors
(20.8)
Top Connector:
ANTARES Toolbus
Bottom Connector: ANTARES Toolbus
Measuring Parameters:
Measuring Range:
CAL:
100 - 330 mm
(3.94"-13")
Accuracy:
1 % of Measured Value + 5 mm (0.2")
Logging parameters
Recommended:
Min. Hole Diameter: 100 mm
Max Hole Diameter: 330 mm
(3.94")
(13")
Recommended:
Logging Speed: max. 30 m/min
5900 ft/hr
Sample Rate: selectable
Combinability
With ANTARES SHARP family of 2 " open hole tools.
ANTARES is continually updating and improving its high performance and quality logging system and instruments. For this reason the
specifications are subject to change without prior notice.
ANTARES 2014
10
63.5 mm
1505 mm
24 kg
(2.5")
(59.25)
(90 lbs)
Max. Temp:
Max. Pressure:
175C
140 MPa
Telemetry required:
Top Connector:
Bottom Connector:
yes
ANTARES Toolbus
ANTARES Toolbus
(350F)
(20,000 psi)
Sensors:
Strain Gage
Mud Resistivity
Temperature
(38.11)
(33.66)
(29.65)
Measuring Parameters:
Measuring Range:
Tension:
Temperature:
Mud Resistivity:
+ 90 kN (+ 20,000 lbs)
Max. Load (Push/Pull)
-5 to 180C
(23 to 356F)
0.01 to 20 Ohmm
Accuracy:
Tension:
Temperature:
Mud Resistivity:
+1%
+ 1 % fs
+5%
Logging Parameters
Recommended
Min. Hole Diameter:
Max. Hole Diameter:
100 mm
NA
(3.94)
Combinability
With ANTARES SHARP family of 2 " open hole tools.
ANTARES is continually updating and improving its high performance and quality logging system and instruments. For this reason the
specifications are subject to change without prior notice.
ANTARES 2014
11
and finally
ANTARES designs and develops leading edge technology to create advanced and reliable logging
equipment and to provide high quality API standard data. State-of-the-Art design tools such as
Altium and Solid Works are used to design ANTARES sophisticated instruments. The company
employs a team of Geophysicists, Programmers, Mathematicians and Mechanical and Electronic
Engineers for the development of these products.
The customer finds in ANTARES a one-stop-shop offering a comprehensive logging system of
dependable down-hole tools and easy-to-use panels and software. The down-hole tools include openhole and cased-hole instruments with diameters of 1 11/16 , 2 and 3 3/8 . ANTARES electrical and
hydraulic winch offerings round out the system solution.
Design and quality during manufacturing are crucial to ANTARES, consequently advanced inspection
and quality control procedures have been implemented throughout the engineering and manufacturing process. Every manufactured product is subjected to a multi-stage quality control and
monitoring procedure, and logging tools are only approved for shipping after they have passed a
complex final check in our own Neutron API standard test pit or test well.
ANTARES down-hole equipment is fully digital. This ensures a high data quality, reliable signal
transmission and very efficient operation.
ANTARES equipment has been used successfully in deep and hot wells (8500 m, 250C) and also at the
other extreme in the Antarctica, at temperatures well below the freezing point.
ANTARES 2014
12
Version 1/2014