Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Digital Energy
D400 FPGA Firmware and BIOS Update
TN00039 V1.00 R0
Technical Note
This document describes the procedure required to update the FPGA firmware and BIOS settings required for R3.20 and onwards.
Prerequisites:
The following items are required for the FPGA firmware update:
D400 with KVM card
1GHz main module: 520-0205,
Substation chassis: 500-0340,
Power supply: 520-0217.
KVM card: 520-0206.
Computer monitor.
USB keyboard.
2.
3.
4.
5.
6.
7.
8.
9.
GE Digital Energy
2.
3.
4.
Connect the USB cable to a USB port on the computer and to the USB Blaster.
5.
Manually install the device driver by going to System Properties -> Hardware -> Device Manager -> USBBLASTER -> General -> Update Driver -> Browse computer -> location of Quartus II Programmer software. (e.g.,
C:\altera\11.1sp1\qprogrammer\drivers).
Result: The Hardware Installation warning appears.
b.
Connect the USB Blaster 10-pin header to the D400 main module assembly and reinstall the main module into the D400
chassis.
a.
b.
TN00039-1.00-0
General Release
GE Digital Energy
c.
Ensure that the 10-pin harness is not pinched during main module installation.
7.
8.
9.
10. Double click USB-Blaster. The currently selected hardware: will change from No Hardware to USB-Blaster [USB-0].
General Release
TN00039-1.00-0
GE Digital Energy
Device is EPCS1.
TN00039-1.00-0
General Release
GE Digital Energy
Product Support
If you need help with any aspect of your GE Digital Energy product, you have a few options.
Copyright Notice
2012, General Electric Company. All rights reserved.
The information contained in this online publication is the exclusive property of General Electric Company, except as otherwise indicated. You may view, copy and print documents and
graphics incorporated in this online publication (the Documents) subject to the following: (1) the Documents may be used solely for personal, informational, non-commercial purposes;
(2) the Documents may not be modified or altered in any way; and (3) General Electric Company withholds permission for making the Documents or any portion thereof accessible via the
internet. Except as expressly provided herein, you may not use, copy, print, display, reproduce, publish, license, post, transmit or distribute the Documents in whole or in part without the
prior written permission of General Electric Company. If applicable, any use, modification, reproduction, release, performance, display, or disclosure of the Software Product and
Associated Material by the U.S. Government shall be governed solely by the terms of the License Agreement and shall be prohibited except to the extent expressly permitted by the terms
of the License Agreement.
The information contained in this online publication is subject to change without notice. The software described in this online publication is supplied under license and may be used or
copied only in accordance with the terms of such license.
Trademark Notice
GE and the GE monogram are trademarks and service marks of General Electric Company.
* Trademarks of General Electric Company.
Other company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies.
Modification Record
Version
Rev.
Date
Author
Change Description
1.00
Qudus Khalifa
Initial version.
General Release
TN00039-1.00-0