Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Version 1.1
Published October 2014
Copyright2014 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identiication or explanation and to the owners beneit, without intent to
infringe.
Disclaimer:
Speciications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or itness for a particular
purpose.
In no event shall ASRock, its directors, oicers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of proits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
his device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
he terms HDMI and HDMI High-Deinition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
Contents
Chapter 1 Introduction
1.1
Package Contents
1.2
Speciications
1.3
Motherboard Layout
1.4
I/O Panel
Chapter 2 Installation
2.1
10
2.2
13
2.3
14
2.4
16
2.5
Jumpers Setup
17
2.6
18
22
3.1
Installing Drivers
22
3.2
A-Tuning
23
3.3
29
3.4
34
3.5
39
3.5.1 UI Overview
39
3.5.2 Apps
40
43
3.5.4 Setting
44
3.6
Start8
45
48
4.1
Introduction
48
4.1.1
48
49
4.2
Main Screen
50
4.3
OC Tweaker Screen
51
4.4
Advanced Screen
60
61
63
65
67
68
69
70
72
74
4.5
Tools
75
4.6
78
4.7
Boot Screen
79
4.8
Security Screen
82
4.9
Exit Screen
83
Z97 Anniversary
Chapter 1 Introduction
hank you for purchasing ASRock Z97 Anniversary motherboard, a reliable
motherboard produced under ASRocks consistently stringent quality control.
It delivers excellent performance with robust design conforming to ASRocks
commitment to quality and endurance.
In this manual, Chapter 1 and 2 contains the introduction of the motherboard
and step-by-step installation guides. Chapter 3 contains the operation guide of the
sotware and utilities. Chapter 4 contains the coniguration guide of the BIOS setup.
Because the motherboard speciications and the BIOS sotware might be updated, the
content of this manual will be subject to change without notice. In case any modiications of this manual occur, the updated version will be available on ASRocks website
without further notice. If you require technical support related to this motherboard,
please visit our website for speciic information about the model you are using. You
may ind the latest VGA cards and CPU support list on ASRocks website as well.
ASRock website http://www.asrock.com.
English
1.2 Speciications
Platform
CPU
th
TM
Supports 5 Generation Intel Core i7/i5/i3/Pentium/
Celeron Processors (Socket 1150)
th
th
TM
Supports New 4 and 4 Generation Intel Xeon/Core i7/
i5/i3/Pentium/Celeron Processors (Socket 1150)
Chipset
Intel Z97
Memory
Expansion
Slot
Graphics
English
Z97 Anniversary
Audio
LAN
English
Rear Panel
I/O
Storage
Connector
BIOS
Feature
Hardware
Monitor
English
OS
Microsot Windows 8.1 32-bit / 8.1 64-bit / 8 32-bit / 8 64bit / 7 32-bit / 7 64-bit
Certiications
Z97 Anniversary
Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using thirdparty overclocking tools. Overclocking may afect your systems stability, or even cause
damage to the components and devices of your system. It should be done at your own
risk and expense. We are not responsible for possible damage caused by overclocking.
English
Due to limitation, the actual memory size may be less than 4GB for the reservation
for system usage under Windows 32-bit operating systems. Windows 64-bit operating systems do not have such limitations. You can use ASRock XFast RAM to utilize
the memory that Windows cannot use.
USB 2.0
T: USB0
B: USB1
Ps2
Keyboard/
Mouse
PWR_FAN1
ATX12V1
ATXPWR1
Top:
RJ-45
USB 3.0
T: USB2
B: USB3
HDMI1
USB 3.0
T: USB0
B: USB1
25
CHA_FAN2
CPU_FAN2
Center:
FRONT
Top:
LINE IN
Bottom:
MIC IN
Z97 Anniversary
24
CPU_FAN1
USB3_4_5
PCIE1
LAN
PCIE2
CMOS
Battery
64Mb
BIOS
Intel
Z97
PCIE3
Super
I/O
PCIE4
SATA3_1
Audio
CODEC
SATA3_0
RoHS
8
9
10
SATA3_2
SATA3_4
SATA3_3
23
SATA3_5
HD_AUDIO1
PCI1
PCI2
USB2_3
PLED PWRBTN
CLRCMOS1
TPMS1
SPEAKER1
CHA_FAN1
PLED1
HDLED RESET
PANEL1
English
22
21
20
13
14
USB4_5
COM1
11
12
19
18
17
16
15
Z97 Anniversary
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
English
No. Description
3
4
No. Description
No. Description
HDMI Port
Microphone (Pink)
* here are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED
LAN Port
English
8
Speed LED
Status
Description
Status
Description
Of
Blinking
On
No Link
Data Activity
Link
Of
Orange
Green
10Mbps connection
100Mbps connection
1Gbps connection
Z97 Anniversary
Chapter 2 Installation
his is an ATX form factor motherboard. Before you install the motherboard, study
the coniguration of your chassis to ensure that the motherboard its into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
Make sure to unplug the power cord before installing or removing the motherboard
components. Failure to do so may cause physical injuries and damages to motherboard
components.
In order to avoid damage from static electricity to the motherboards components,
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
Hold components by the edges and do not touch the ICs.
Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
English
When placing screws to secure the motherboard to the chassis, please do not overtighten the screws! Doing so may damage the motherboard.
A
B
English
10
Z97 Anniversary
English
11
Please save and replace the cover if the processor is removed. he cover must be placed
if you wish to return the motherboard for ater service.
English
12
Z97 Anniversary
English
CP
U_
FA
N
13
1. For dual channel coniguration, you always need to install identical (the same
brand, speed, size and chip-type) DDR3 DIMM pairs.
2. It is unable to activate Dual Channel Memory Technology with only one or three
memory module installed.
3. It is not allowed to install a DDR or DDR2 memory module into a DDR3 slot;
otherwise, this motherboard and DIMM may be damaged.
DDR3_A1
DDR3_A2
DDR3_B1
Populated
Populated
Populated
Populated
DDR3_B2
Populated
Populated
Populated
Populated
he DIMM only its in one correct orientation. It will cause permanent damage to
the motherboard and the DIMM if you force the DIMM into the slot at incorrect
orientation.
English
14
Z97 Anniversary
English
15
Before installing an expansion card, please make sure that the power supply is
switched of or the power cord is unplugged. Please read the documentation of the
expansion card and make necessary hardware settings for the card before you start
the installation.
PCI slots:
he PCI1 and PCI2 slots are used to install expansion cards that have 32-bit PCI
interface.
PCIe slots:
PCIE1 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE2 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.
PCIE3 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE4 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width cards.
English
16
Z97 Anniversary
Default
Clear CMOS
English
CLRCMOS1 allows you to clear the data in CMOS. To clear and reset the system
parameters to default setup, please turn of the computer and unplug the power
cord from the power supply. Ater waiting for 15 seconds, use a jumper cap to
short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear
the CMOS right ater you update the BIOS. If you need to clear the CMOS when
you just inish updating the BIOS, you must boot up the system irst, and then shut
it down before you do the clear-CMOS action. Please be noted that the password,
date, time, and user default proile will be cleared only if the CMOS battery is
removed.
17
PLED+
PLEDPWRBTN#
GND
1
GND
RESET#
GND
HDLEDHDLED+
English
18
Z97 Anniversary
1
PLEDPLED+
PLED+
SATA3_3
SATA3_2
SATA3_5
SATA3_4
USB_PWR
PP+
GND
DUMMY
1
GND
P+
PUSB_PWR
Vbus
Vbus
IntA_PB_SSRX-
IntA_PA_SSRX-
IntA_PB_SSRX+
GND
IntA_PA_SSRX+
GND
IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
GND
IntA_PB_D-
GND
IntA_PA_D-
IntA_PB_D+
IntA_PA_D+
Dummy
1
GND
PRESENCE#
MIC_RET
OUT_RET
English
SATA3_1
SATA3_0
power status.
1
O U T 2 _ L
J _ S E N S E
OUT2_R
MIC2_R
MIC2_L
19
1. High Deinition Audio supports Jack Sensing, but the panel wire on the chassis must
support HDA to function correctly. Please follow the instructions in our manual and
chassis manual to install your system.
2. If you use an AC97 audio panel, please install it to the front panel audio header by
the steps below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for the HD audio panel only. You dont need to
connect them for the AC97 audio panel.
E. To activate the front mic, go to the FrontMic Tab in the Realtek Control panel
and adjust Recording Volume.
DUMMY SPEAKER
1
+5V
DUMMY
GND
+12V
FAN_SPEED
FAN_SPEED_CONTROL
(3-pin PWR_FAN1)
(see p.6, No. 1)
English
(3-pin CPU_FAN2)
(see p.6, No. 25)
20
+12V
2
3
GND
(4-pin CHA_FAN2)
(see p.6, No. 7)
FAN_SPEED
FAN_SPEED_CONTROL
FAN_SPEED
+12V
GND
GND
+12V
2
3
4
FAN_SPEED
FAN_SPEED_CONTROL
GND
FAN_VOLTAGE
FAN_SPEED
Z97 Anniversary
12
24
13
RRXD1
DDTR#1
DDSR#1
CCTS#1
GND
+3VSB
English
GND
S_PWRDWN#
GND
+3V
SERIRQ#
LAD2
LAD1
LAD3
SMB_CLK_MAIN
SMB_DATA_MAIN
PCIRST#
LAD0
GND
FRAME
TPM Header
(17-pin TPMS1)
(see p.6, No. 19)
PCICLK
RRI#1
RRTS#1
GND
TTXD1
DDCD#1
21
Drivers Menu
he drivers compatible to your system will be auto-detected and listed on the
support CD driver page. Please click Install All or follow the order from top to
bottom to install those required drivers. herefore, the drivers you install can work
properly.
Utilities Menu
he Utilities Menu shows the application sotware that the motherboard supports.
Click on a speciic item then follow the installation wizard to install it.
To improve Windows 7 compatibility, please download and install the following hot
ix provided by Microsot.
KB2720599: http://support.microsot.com/kb/2720599/en-us
English
22
Z97 Anniversary
3.2 A-Tuning
A-Tuning is ASRocks multi purpose sotware suite with a new interface, more new
features and improved utilities, including XFast RAM, Dehumidiier, Good Night
LED, FAN-Tastic Tuning, OC Tweaker and a whole lot more.
Operation Mode
English
23
Tools
Various tools and utilities.
XFast RAM
Boost the systems performance and extend the HDDs or SDDs lifespan! Create a
hidden partition, then assign which iles should be stored in the RAM drive.
XFast LAN
Boost the speed of your internet connection! Select a speciic mode for making the
designated program's priority highest.
Fast Boot
Fast Boot minimizes your computer's boot time. Please note that Ultra Fast mode
is only supported by Windows 8.1/8 and the VBIOS must support UEFI GOP if you
are using an external graphics card.
OMG
Schedule the starting and ending hours of Internet access granted to other users.
Place X marks on the time table to disable the Internet.
English
24
Z97 Anniversary
FAN-Tastic Tuning
Conigure up to ive diferent fan speeds using the graph. he fans will automatically
shit to the next speed level when the assigned temperature is met.
Dehumidiier
Prevent motherboard damages due to dampness. Enable this function and
conigure the period of time until the computer powers on, and the duration of the
dehumidifying process.
USB Key
Plug in the USB Key and let your computer log in to windows automatically!
OC DNA
OC DNA is an unique sotware which helps to save your OC settings as a proile.
hen you can send this OC setting proile to the friends.
English
Disk Health Report is a hard disk health monitoring utility that displays detailed
HDD information, such as hard disk model, serial number, irmware, power on
count, power on hours, S.M.A.R.T. values, current temperature, etc. HDD, SSD
and optical disk drives are all supported. he health status block displays Good
(in green color), Caution (in yellow color) or Bad (in red color). Click on the health
status icon to conigure settings for an alert to be triggered.
25
OC Tweaker
Conigurations for overclocking the system.
System Info
View information about the system.
*he System Browser tab may not appear for certain models.
English
26
Z97 Anniversary
Live Update
Check for newer versions of BIOS or drivers.
Tech Service
English
Contact Tech Service if you have problems with your computer. Please leave your
contact information along with details of the problem.
27
Settings
Conigure ASRock A-Tuning. Click to select "Auto run at Windows Startup" if you
want A-Tuning to be launched when you start up the Windows operating system.
English
28
Z97 Anniversary
Set the SATA mode to AHCI. If Windows 8.1/8/7 is already installed under
IDE mode, directly changing the SATA mode to AHCI may cause Windows
8/7 to crash while booting. If your system is not in AHCI mode, please follow
the instructions below.
1.
Press Win + R simultaneously in Windows 8/7, type "Regedit" into the word
box then click OK.
2.
English
here are certain risks. Please backup any important data before operating to avoid
loss.
29
3.
4.
5.
Enter Windows 8/7. Windows will discover the new device and install AHCI
drivers automatically.
English
30
Z97 Anniversary
Step 3
When prompted to restart ater the setup, click Yes to reboot.
Step 4
in the Windows
English
31
Step 5
Make sure Rapid Start is on. Drag the slider to conigure the time. For example, if
the timer value is set to ten minutes, the system will enable Rapid Start mode ater
entering sleep state for ten minutes. If the timer is set to 0 minutes, Windows will
immediately enable Rapid Start mode as it enters sleep state.
English
32
1.
You may shut down the computer without terminating the applications or iles
you are executing currently. Click on Windows Start > the arrow next to Shut
down, and click on Sleep.
2.
3.
Z97 Anniversary
state for a period of time. he power of the computer in Rapid Start mode can
be cut of, it will not cause data loss of the programs or iles you were executing
before entering sleep state.
When you wish to continue to use the computer just hit the power button, the
system will rapidly return to Windows, the programs and iles which you were
using before entering sleep state will be accessible immediately.
English
4.
33
Set the SATA mode to AHCI. If Windows 8.1/8/7 is already installed under
IDE mode, directly changing the SATA mode to AHCI may cause Windows
8/7 to crash while booting. If your system is not in AHCI mode, please follow
the instructions below.
here are certain risks. Please backup any important data before operating to avoid
loss.
English
34
1.
Press Win + R simultaneously in Windows 8/7, type "Regedit" into the word
box then click OK.
2.
Z97 Anniversary
Step 2
English
Once installed, run ASRock Smart Connect from your desktop or go to Windows
Start -> All Programs -> ASRock Utility.
35
Step 3
Click the Add button. Take Foxmail as an example, add Foxmail to the Application
list.
Step 4
Select Foxmail from the Application List, then click the arrow pointing right to add
this application to the Smart Connect List.
English
Step 5
Click Apply to enable Smart Connect.
36
Z97 Anniversary
Step 6
Double-click the Intel Smart Connect Technology Manager icon
in the
2.
Click on Windows Start -> the arrow next to Shut down, and click on Sleep.
3.
English
1.
37
English
38
4.
he system will wake up from sleep state periodically, and then start to update
Foxmail. he screen will not display anything so the computer can maintain
minimum power usage. Aterwards, the system will automatically return to
sleep state again.
5.
Upon waking up the system, you will ind the new mail that were sent to you
during sleep state are already updated and ready to be read in Foxmail.
Z97 Anniversary
Double-click
*You need to be connected to the Internet to download apps from the ASRock APP Shop.
3.5.1 UI Overview
Category Panel
Hot News
Information Panel
Category Panel: he category panel contains several category tabs or buttons that
when selected the information panel below displays the relative information.
Information Panel: he information panel in the center displays data about the
currently selected category and allows users to perform job-related tasks.
English
Hot News: he hot news section displays the various latest news. Click on the image
to visit the website of the selected news and know more.
39
3.5.2 Apps
When the "Apps" tab is selected, you will see all the available apps on screen for you
to download.
Installing an App
Step 1
Find the app you want to install.
he most recommended app appears on the let side of the screen. he other various
apps are shown on the right. Please scroll up and down to see more apps listed.
You can check the price of the app and whether you have already intalled it or not.
- he red icon displays the price or "Free" if the app is free of charge.
- he green "Installed" icon means the app is installed on your computer.
Step 2
Click on the app icon to see more details about the selected app.
English
40
Z97 Anniversary
Step 3
to start downloading.
Step 4
When installation completes, you can ind the green "Installed" icon appears on the
upper right corner.
English
41
Upgrading an App
You can only upgrade the apps you have already installed. When there is an
available new version for your app, you will ind the mark of "New Version"
appears below the installed app icon.
Step 1
Click on the app icon to see more details.
Step 2
Click on the yellow icon
English
42
to start upgrading.
Z97 Anniversary
Step 1
Please check the item information before update. Click on
Step 2
Click to select one or more items you want to update.
Step 3
English
43
3.5.4 Setting
In the "Setting" page, you can change the language, select the server location, and
determine if you want to automatically run the ASRock APP Shop on Windows
startup.
English
44
Z97 Anniversary
3.6 Start8
For those Windows 8 users who miss the Start Menu, Start8 is an ideal solution that
brings back the familiar Start Menu along with added customizations for greater
eiciency.
English
Select between the Windows 7 style and Windows 8 style Start Menu. hen select
the theme of the Start Menu and customize the style of the Start icon.
45
Conigure
Conigure provides coniguration options, including icon sizes, which shortcuts you
want Start Menu to display, quick access to recently used apps, the functionality of
the power button, and more.
Control
English
46
Z97 Anniversary
Control lets you conigure what a click on the start button or a press on the
Windows key does.
Desktop
Desktop allows you to disable the hot corners when you are working on the desktop.
It also lets you choose whether or not the system boots directly into desktop mode
and bypass the Metro user interface.
About
English
47
Because the UEFI sotware is constantly being updated, the following UEFI setup
screens and descriptions are for reference purpose only, and they may not exactly
match what you see on your screen.
English
48
Main
OC Tweaker
Advanced
Tool
Useful tools
H/W Monitor
Boot
Security
Exit
Z97 Anniversary
+ / -
Description
To change option for the selected items
<Tab>
<PGUP>
<PGDN>
<HOME>
<END>
<F1>
<F7>
<F9>
<F10>
<F12>
Print screen
<ESC>
English
Navigation Key(s)
49
Favorite
Display your collection of BIOS items. Press F5 to add/remove your favorite items.
Full HD UEFI
When [Auto] is selected, the resolution will be set to 1920 x 1080 if the monitor
supports Full HD resolution. If the monitor does not support Full HD resolution,
then the resolution will be set to 1024 x 768. When [Disable] is selected, the
resolution will be set to 1024 x 768 directly.
UEFI Guide
UEFI Guide is a quick tutorial for ASRock's UEFI setup Utility. You may abort the
tutorial by pressing "ESC".
English
50
Z97 Anniversary
Because the UEFI sotware is constantly being updated, the following UEFI setup
screens and descriptions are for reference purpose only, and they may not exactly
match what you see on your screen.
Advanced Turbo
You can use this option to increase your system performance. his option appears only
when your CPU supports this function. his option appears only when you adopt K-Series
CPU.
English
51
CPU Coniguration
CPU Ratio
he CPU speed is determined by the CPU Ratio multiplied with the BCLK.
Increasing the CPU Ratio will increase the internal CPU clock speed without
afecting the clock speed of other components.
BCLK/PCIE Frequency
he CPU speed is determined by the CPU Ratio multiplied with the BCLK.
Increasing the BCLK will increase the internal CPU clock speed but also afect the
clock speed of other components.
Spread Spectrum
Enable Spread Spectrum to reduce electromagnetic interference for passing EMI
tests. Disable to achieve higher clock speeds when overclocking.
English
52
Z97 Anniversary
GT Frequency
Conigure the frequency of the integrated GPU.
GT Voltage Mode
Auto: For optimized settings.
Adaptive: Add voltage to the integrated GPU when the system is under heavy load.
Override: he voltage is ixed.
GT Adaptive Voltage
Conigure the voltage added to the integrated GPU when the system is under heavy
load.
GT Voltage Ofset
Conigure the ixed voltage added to the integrated GPU.
English
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted
53
DRAM Coniguration
DRAM Tweaker
Fine tune the DRAM settings by leaving marks in checkboxes. Click OK to conirm and
apply your new settings.
English
54
Z97 Anniversary
tREFI
English
tCKE
Conigure the period of time the DDR3 initiates a minimum of one refresh
command internally once it enters Self-Refresh mode.
55
tRDRD
Conigure between module read to read delay.
tRDRDDR
Conigure between module read to read delay from diferent ranks.
tRDRDDD
Use this to change DRAM tRWSR Auto/Manual settings. he default is [Auto].
tWRRD
Conigure between module write to read delay.
tWRRDDR
Conigure between module write to read delay from diferent ranks.
tWRRDDD
Use this to change DRAM tRRSR Auto/Manual settings. he default is [Auto].
Conigure between module write to read delay from diferent DIMMs.
tWRWR
Conigure between module write to write delay.
tWRWRDR
Conigure between module write to write delay from diferent ranks.
tWRWRDD
Conigure between module write to write delay from diferent DIMMs.
tRDWR
Conigure between module read to write delay.
tRDWRDR
Conigure between module read to write delay from diferent ranks.
tRDWRDD
Conigure between module read to write delay from diferent DIMMs.
English
RTL (CHA)
Conigure round trip latency for channel A.
56
Z97 Anniversary
RTL (CHB)
Conigure round trip latency for channel B.
IO-L (CHA)
Conigure IO latency for channel A.
IO-L (CHB)
Conigure IO latency for channel B.
ODT WR (CHA)
Conigure the memory on die termination resistors' WR for channel A.
ODT WR (CHB)
Conigure the memory on die termination resistors' WR for channel B.
FIVR Coniguration
FIVR Switch Frequency Signature
Select whether to boost or lower the FIVR Switch Frequency.
57
Voltage Coniguration
CPU Input Voltage
Conigure the voltage for the CPU.
English
DRAM Voltage
Use this to conigure DRAM Voltage.
58
Z97 Anniversary
English
59
Setting wrong values in this section may cause the system to malfunction.
English
60
Z97 Anniversary
61
Hardware Prefetcher
Automatically prefetch data and code for the processor. Enable for better
performance.
English
62
Z97 Anniversary
VT-d
Intel Virtualization Technology for Directed I/O helps your virtual machine
monitor better utilize hardware by improving application compatibility and
reliability, and providing additional levels of manageability, security, isolation, and
I/O performance.
Share Memory
Conigure the size of memory that is allocated to the integrated graphics processor
when the system boots up.
IGPU Multi-Monitor
English
Select disable to disable the integrated graphics when an external graphics card is
installed. Select enable to keep the integrated graphics enabled at all times.
Render Standby
Power down the render unit when the GPU is idle for lower power consumption.
63
Onboard HD Audio
Enable/disable onboard HD audio. Set to Auto to enable onboard HD audio and
automatically disable it when a sound card is installed.
Front Panel
Enable/disable front panel HD audio.
Onboard LAN
Enable or disable the onboard network interface controller.
Deep Sleep
Conigure deep sleep mode for power saving when the computer is shut down.
English
64
Z97 Anniversary
SATA Controller(s)
Enable/disable the SATA controllers.
English
SATA Aggressive Link Power Management allows SATA devices to enter a low
power state during periods of inactivity to save power. It is only supported by AHCI
mode.
65
English
66
Z97 Anniversary
English
Intel Rapid Start Technology is a new zero power hibernation mode which allows
users to resume in just 5-6 seconds.
67
English
68
Z97 Anniversary
PS2 Y-Cable
Enable the PS2 Y-Cable or set this option to Auto.
Serial Port
Enable or disable the Serial port.
English
69
Suspend to RAM
Select disable for ACPI suspend type S1. It is recommended to select auto for ACPI
S3 power saving.
English
70
Z97 Anniversary
Ring-In Power On
Allow the system to be waked up by onboard COM port modem Ring-In signals.
English
71
USB Controller
Enable or disable all the USB ports.
Enable or disable Legacy OS Support for USB 3.0 devices. If you encounter USB
compatibility issues it is recommended to disable legacy USB support. Select UEFI
Setup Only to support USB devices under the UEFI setup and Windows/Linux
operating systems only.
72
Z97 Anniversary
English
If your USB devices (i.e. USB mouse or storage) encounter compatibility problems,
please enable this option to ix it. Please note that ater enabling this option, it is
normal that the system will postpone booting up ater pressing the power button.
73
English
74
Z97 Anniversary
4.5 Tools
System Browser
ASRock System Browser shows the overview of your current PC and the devices
connected.
English
Easy RAID Installer helps you to copy the RAID driver from the support CD to
your USB storage device. Ater copying the drivers please change the SATA mode to
RAID, then you can start installing the operating system in RAID mode.
75
CD, Easy Driver Installer is a handy tool in the UEFI that installs the LAN driver
to your system via an USB storage device, then downloads and installs the other
required drivers automatically.
Instant Flash
Save UEFI iles in your USB storage device and run Instant Flash to update your
UEFI.
Internet Flash
ASRock Internet Flash downloads and updates the latest UEFI irmware version
from our servers for you. Please setup network coniguration before using Internet
Flash.
*For BIOS backup and recovery purpose, it is recommended to plug in your USB
pen drive before using this function.
Network Coniguration
Use this to conigure internet connection settings for Internet Flash.
Internet Setting
Enable or disable sound efects in the setup utility.
English
Dehumidiier Function
76
Z97 Anniversary
Dehumidiier Period
Conigure the period of time until the computer powers on and enables
Dehumidiier ater entering S4/S5 state.
Dehumidiier Duration
Conigure the duration of the dehumidifying process before it returns to S4/S5
state.
English
77
English
78
Z97 Anniversary
Fast Boot
Fast Boot minimizes your computer's boot time. In fast mode you may not boot
from an USB storage device. Ultra Fast mode is only supported by Windows 8.1/8
and the VBIOS must support UEFI GOP if you are using an external graphics card.
Please notice that Ultra Fast mode will boot so fast that the only way to enter this
UEFI Setup Utility is to Clear CMOS or run the Restart to UEFI utility in Windows.
Bootup Num-Lock
English
Select whether Num Lock should be turned on or of when the system boots up.
Boot Beep
Select whether the Boot Beep should be turned on or of when the system boots up. Please
note that a buzzer is needed.
79
CSM
English
Enable to launch the Compatibility Support Module. Please do not disable unless
youre running a WHCK test. If you are using Windows 8.1/8 64-bit and all of your
devices support UEFI, you may also disable CSM for faster boot speed.
80
Z97 Anniversary
English
Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Do not launch?
81
Supervisor Password
Set or change the password for the administrator account. Only the administrator
has authority to change the settings in the UEFI Setup Utility. Leave it blank and
press enter to remove the password.
User Password
Set or change the password for the user account. Users are unable to change the
settings in the UEFI Setup Utility. Leave it blank and press enter to remove the
password.
Secure Boot
Enable to support Windows 8.1 / 8 Secure Boot.
English
82
Z97 Anniversary
Discard Changes
When you select this option the following message, Discard changes? will pop
out. Select [OK] to discard all changes.
English
83
Contact Information
If you need to contact ASRock or want to know more about ASRock, youre welcome
to visit ASRocks website at http://www.asrock.com; or you may contact your dealer
for further information. For technical questions, please submit a support request
form at http://www.asrock.com/support/tsd.asp
ASRock Incorporation
2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District,
Taipei City 112, Taiwan (R.O.C.)
English
84