Sei sulla pagina 1di 76

Contents

2 - Sensors for pressure control


OsiSense XM

Selection guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2/2

Electronic pressure sensors for control circuits

For controlling the pressure of air, water, hydraulic oils, corrosive fluids

b Type XML G, without display


v Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
v Pressure transmitters with analogue output 4...20 mA or 0...10 V . . .
v Pressure and vacuum switches, with solid-state NPN or PNP output .
v Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

b Type XML K, without display


v Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
v Pressure transmitters with analogue output,
- bar version, 4...20 mA or 0...10 V . . . . . . . . . . . . . . . . . . . . . . . . . . .
- PSI version, 4...20 mA or 0...10 V . . . . . . . . . . . . . . . . . . . . . . . . . . .
v Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
b Type XML E, without display
v Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
v Pressure transmitters with analogue output 4...20 mA . . . . . . . . . . . .
v Pressure and vacuum switches for regulation between 2 tresholds . .
v Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

page 2/10
page 2/12
page 2/16
page 2/20
page 2/22
page 2/24
page 2/26
page 2/28
page 2/30
page 2/32
page 2/36
page 2/40

b Type XML F, with digital display


v Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2/42
v Sizes: -1 bar to 600 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 2/44 to 2/69
v Accessories and replacement parts . . . . . . . . . . . . . . . . . . . . . . . . . . page 2/70
v General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2/72

Electromechanical pressure and vacuum switches for


control circuits

For controlling the pressure of air, water, hydraulic oils, corrosive fluids and
viscous products
b Type XML, presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2/76

b For detection of a single treshold (fixed differential)


v Type XML A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 2/78 to 2/129
b For regulation between 2 tresholds (adjustable differential)
v Type XML B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 2/79 to 2/129
v Type XML C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 2/80 to 2/129
b Dual stage, fixed differential, for detection at each treshold
v Type XML D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 2/81 to 2/129

b Accessories and replacement parts . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2/130


b Equivalent model references of XML and XM2 JM, XMJ and XMG
pressure and vacuum switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2/134
b Components materials of switch in contact with the fluid . . . . . . . . . . . page 2/136

For controlling the pressure of air, water, hydraulic oils and corrosive fluids
b For control regulation between 2 tresholds, with adjustable differential
v Types ACW and ADW, presentation . . . . . . . . . . . . . . . . . . . . . . . . . page 2/138
v Type ACW, sizes: 0.7 to 131 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2/140
v Type ADW, sizes: 69 to 340 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2/142

For controlling the pressure of air and water


b For control regulation between 2 tresholds, with adjustable differential
v Types XMX and XMA, presentation . . . . . . . . . . . . . . . . . . . . . . . . . page 2/146
v Types XMX and XMA, sizes: 6 to 25 bar . . . . . . . . . . . . . . . . . . . . . . page 2/148
v Accessories and replacement parts for XMX and XMA . . . . . . . . . . page 2/150

10

2/0

Electromechanical pressure switches for power


circuits

For controlling the pressure of water


b Types FTG, FSG and FYG
v Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2/152
b For detection of a single threshold with fixed differential
v Type FTG, size 4,6 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2/154

b For regulation between 2 threshold with adjustable differential


v Type FSG, size: 4,6 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2/155
v Type FSG NE, size: 4,6 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2/155
v Type FYG, sizes: 7 to 10,5 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2/156

For controlling the pressure of air and water


b For regulation between 2 threshold with adjustable differential
v Type XMP, presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2/158
v Type XMP, IP 54, sizes: 6 to 25 bar. . . . . . . . . . . . . . . . . . . pages 2/160 to 2/165
v Type XMP, IP 65, sizes: 6 to 25 bar. . . . . . . . . . . . . . . . . . . . . . . . . . page 2/166
v Accessories and replacement parts for XMP . . . . . . . . . . . . . . . . . . page 2/168

Electromechanical pressure and vacuum switches


b OsiSense XM
v General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2/170
v Operating curvs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2/176

10

2/1

Selection guide

Applications

Sensors for pressure control


OsiSense XM
Electronic pressure sensors

Type of installation

Control circuits

Fluids controlled

Air, water, hydraulic oils, corrosive fluids

Type of sensor and features

Units without display


Pressure transmitters
Analogue output 420mA or 0...10 V

Pressure and vacuum switches


Factory set switching thresholds
Solid-state NPN or PNP output

2
3
4
5
6
7

Fluid characteristics

Air, fresh water, sea water, hydraulic oils, corrosive fluids (-15+125C)

Sizes

- 1 bar400 bar (- 14.5 psi5800 psi)

Dimensions of case (mm)

Width x height x depth

22.8 x 70.1

22.8 x 85

22.8 x 70.1

Type of output

Analogue, 420 mA or 010 V

Degree of protection

IP 66, IP 67 conforming to IEC/EN60529, NEMA 4

Electrical connection

M12 connector (1)

Fluid connection

G 1/4 A (male) conforming to ISO7 (3)

Type reference

XMLGpppD21, XMLGpppD71
XMLGpppD21TQ (4),
XMLGpppD71TQ (4)
XMLGpppQ21TQ (4),
XMLGpppQ71TQ (4)

Pages

2/12 to 2/19

8
Other versions

9
10

2/2

Integrated quick
connection (2)

22.8 x 85

Solid-state, PNP or NPN, NC output


150 mA, c 12/24 V

M12 connector (1)

Integrated quick
connection (2)

XMLGpppD31TQ (4)
XMLGpppD41TQ (4)
XMLGpppQ31TQ (4)
XMLGpppQ41TQ (4)

(1) Other connections (AMP connector, cable, etc.), please consult our Customer Care Centre.
(2) Phoenix Contact "Quickon" type integrated connection.
(3) Other fluid connections (G1/4, 1/4 NPT, etc.), please consult our Customer Care Centre.
(4) Sold in lots of 25.

Control circuits
Air, fresh water

Air, water, hydraulic oils, corrosive fluids

Units without display


Pressure transmitters
Analogue output, 420mA or 0...10 V
Applications: pumping

Pressure transmitters
Analogue output, 420 mA

Pressure and vacuum switches


with solid-state output
Regulation between 2 thresholds
(adjustable differential)

2
3

Air, fresh water (0...+ 80C)

025 bar (0362 psi)

Air, fresh water, sea water, hydraulic oils, corrosive fluids


(-15+80C)
0... 300 psi (0... 20.7 bar)

- 1 bar600 bar (- 14.5 psi8700 psi)

36 x 79.5

40 x 87 (sizes - 125 bar)


40 x 97 (sizes 60600 bar)

Analogue, 420 mA or 010 V

Analogue, 420 mA

IP 65 conforming to IEC/EN60529, NEMA 4

IP 65

M12, DIN 43650 A or Metri-Pack (Packard) connector (1)

DIN 43650 A or M12 connector

G 1/4 A (male) conforming to ISO7 or 1/4"-18 NPT male (2)

G 1/4 A (male)

XMLKpppB2Cpp, XMLKpppB2CppTQ (3)


XMLKpppB2Dpp, XMLKpppB2DppTQ (3)
XMLKpppP2Cpp, XMLKpppP2CppTQ (3)
XMLKpppP2Dpp, XMLKpppP2DppTQ (3)
XMLKpppP2Ppp, XMLKpppP2PppTQ (3)

XMLEpppppp21

2/24 to 2/27

2/32 to 2/39

5
Solid-state, NPN or PNP, NC

6
7
XMLEpppppp31
XMLEpppppp41

(1) Other electrical connections, please consult our Customer Care Centre.
(2) Other fluid connections (G1/4, 1/4 NPT, etc.), please consult our Customer Care Centre.
(3) Sold in lots of 25.

9
10

2/3

Selection guide

Applications

Sensors for pressure control


OsiSense XM
Electronic pressure sensors

Type of installation

Control circuits

Fluids controlled

Air, water, hydraulic oils, corrosive fluids

Type of sensor and features

Configurable units with digital display


Pressure transmitters
Output current 420mA

Configurable units with digital display


Pressure transmitters
Output voltage 010V

2
3
4
5

Fluid characteristics

Air, fresh water, sea water, hydraulic oils, corrosive fluids (-15+80C)

Sizes

- 1 bar600 bar (- 14.5 psi8700 psi)

Dimensions of case (mm)

6
7
8
9

Width x height x depth

46 x 113 x 58

Type of output

Analogue, 420 mA

Degree of protection

IP 67

Electrical connection

M12 connector

Fluid connection

G 1/4 (female) or 1/4 NPT

Type reference

XMLFpppD201p

Pages

2/44 to 2/69

Other versions

10

2/4

Analogue, 010 V

XMLFpppD211p

Pressure transmitters and electronic pressure and vacuum switches with alternative tapped fluid
entries: ISO, NPT, etc. Please consult our Customer Care Centre.

Control circuits
Air, water, hydraulic oils, corrosive fluids
Configurable units with
digital display
Universal sensors
Regulation between 2 thresholds
(adjustable differential)

Configurable units with


digital display
Universal sensors
Regulation between 2 thresholds
(adjustable differential)

Solid-state and analogue output


current 420mA

Solid-state and analogue output


voltage 010V

Configurable units with


digital display
Pressure and vacuum switches
with 2.5A relay outputs
Regulation between 2 thresholds
(adjustable differential)

Configurable units with


digital display
Dual stage pressure and vacuum
switches (solid-state outputs)
Detection of 2 thresholds and
adjustable differential for each
threshold

1
2
3
4

Air, fresh water, sea water, hydraulic oils, corrosive fluids (-15+80C)

- 1 bar600 bar (- 14.5 psi8700 psi)

46 x 113 x 58

Solid-state, PNP or NPN, 200 mA,


c24 V output
Analogue output, 420 mA

Solid-state, PNP or NPN, 200 mA,


c24V output
Analogue output, 010 V

46 x 119 x 58

46 x 113 x 58

Relay output
2.5A, a120V

2 solid-state outputs, PNP or NPN,


200mA, c24V

SAE7/8"-16UN
connector

M12 connector

XMLFpppE204p

XMLFpppD203p

IP 67

M12 connector

G 1/4 (female) or 1/4 NPT

XMLFpppD202p

XMLFpppD212p

2/44 to 2/69

9
10

2/5

Selection guide

Applications

Sensors for pressure control

OsiSense XM
Electromechanical pressure and vacuum switches

Type of installation

Control circuits

Fluids controlled

Air, water, hydraulic oils, corrosive fluids, viscous products

Type of operation

Detection of a
single threshold
(fixed differential)

Regulation between 2 thresholds (adjustable differential)

2
3
4
5

Fluid characteristics

Air, fresh water, sea water, corrosive fluids, viscous products, up to 160C
depending on model

Sizes

- 1 bar500 bar (- 14.5 psi7250 psi)

Dimensions of case (mm)

6
7
8

35 x 68 x 75

46 x 68 x 85

Type of contacts

1 CO single-pole, snap action

2 CO single-pole, simultaneous,
snap action

Degree of protection

IP 66: switches with terminal connections


IP 65: switches with connector

IP 66: switches with terminal


connections

Electrical connection

Screw terminals: 1 entry tapped M20 x 1.5 mm for ISO cable gland
or tapped for n 13 cable gland

Fluid connection

G 1/4 (female)
G 1" (female) for viscous products

Type reference

XMLA

Pages

2/78 to 2/129

Other versions

9
10

2/6

Width x height x depth

XMLB

XMLC

Electromechanical pressure and vacuum switches with alternative tapped cable entries and/
or fluid entries: NPT etc. Please consult our Customer Care Centre.

Control circuits

Air, water, hydraulic oils, corrosive fluids,


viscous products

Air, hydraulic oils, corrosive fluids

Dual stage switches


Detection at each threshold (fixed differential)

Regulation between 2 thresholds (adjustable differential)

2
3

Air, fresh water, sea water, corrosive fluids,


viscous products, up to 160C depending on model

Air, oils and other non corrosive fluids


(-73+125C)

Oils and other fluids (-30+125C)


Only oils, including synthetic oils, for certain models

- 1 bar500 bar (- 14.5 psi7250 psi)

0.7bar131bar (10.15psi1900psi)

69bar340bar (1000psi4930psi)

45 x 68 x 85

88 x 88 x 68

2 CO single-pole, staggered, snap action

1 CO or 2 CO single-pole, snap action

IP 66: switches with terminal connections

IP 65

Screw terminals: 1 entry tapped M20 x 1.5 mm for


ISO cable gland or tapped for n 13 cable gland

Screw terminals: 1 entry tapped for n 13 cable gland

G 1/4 (female)
G 1" (female) for viscous products

4
5
6
7

G 3/8 (female)

XMLD

ACW

ADW

2/81 to 2/129

2/140

2/142

8
9
10

2/7

Selection guide

Applications

Sensors for pressure control


OsiSense XM
Electromechanical pressure switches

Type of installation

Control circuits

Fluids controlled

Air, water

Type of operation

Regulation between 2 thresholds (adjustable differential)

2
3
4
5
6
7
8

Fluid characteristics

Air, fresh water, sea water (0+70C)

Sizes

6 bar, 12 bar and 25 bar (87 psi, 174 psi and 362.5 psi)

Dimensions of case (mm)

Width x height x depth

57 x 78 x 97.5

Setting of switching points

Internal screws

Type of contacts

1 CO single-pole, snap action

Degree of protection

IP 54

Electrical connection

Screw terminals: 2 entries tapped for n 13 cable gland,


one fitted with n 13 cable gland,
one fitted with blanking plug

Fluid connection

G 1/4 or 4 x G 1/4 (female) depending on model

Type reference

XMX

XMA

Pages

2/148

2/149

Other versions

9
10

2/8

External screws

Electromechanical pressure switches with alternative tapped cable entries and/or fluid entries:
ISO, NPT, etc. Please consult our Customer Care Centre.

Power circuits
Water
Detection of a
single threshold
(fixed differential)

Air, water
Regulation between 2 thresholds (adjustable differential)

2
3

Fresh water, sea water (0+ 70C)

4.6 bar (66.7 psi)

73 x 73 x 102

7 bar (101.5 psi)

72 x 77 x 106

Air, fresh water, sea water


(0+ 70C)
10.5 bar (152.3 psi)

72 x 73 x 102

6 bar, 12 bar and 25 bar


(87 psi, 174 psi and 362.5 psi)
57 x 78 x 97.5

Internal screws

2 NC snap action

2 NC or 3 NC snap action

IP 20/IP 65

IP 54 or IP 65 depending
on model

Screw terminals: 2 cable entries with grommet or 2 cable entries with n 13 cable gland

Screw terminals: 2 entries


incorporating n 13 cable
gland or without cable gland,
depending on model

G 1/4 or R 1/4 (female or male)

G 1/4, G 3/8 or 4 x G 1/4


(female) depending on model

FTG p, FTG pNE


2/154 to 2/156

FSGp, FSG pNE

FYG 22, FYG 22NE

FYG 32, FYG 32NE

6
7

XMP

2/160 to 2/167

9
10

2/9

Electronic pressure sensors

Presentation

OsiSense XM, type XMLG


For control circuits

Presentation

1
2

3
4

Pressure transmitters and pressure switches type XMLG are characterised by their
ceramic pressure measuring cell. The deformation caused by the pressure is
transmitted to the resistors of a Wheatstone bridge silk-screened on the ceramic.
The change in resistance is then processed by the integrated electronics for
providing either a digital or analogue output signal.

1
2
3
4
5
6

Electrical connection, for example: M12


Electronics with EMC protection
Ceramic measuring cell
Seals
Leakage protection
Threaded connection

Functions

Pressure transmitters have an analogue 4-20 mA or 0-10 V output that is proportional


to the measuring range.

Pressure and vacuum switches have a solid-state NPN or PNP normally closed
(NC) output.
An anti-leakage system integrated in products for pressures u 40 bar prevents fluid
leakage in the event of the measuring cell destruction pressure being exceeded.

These compact products that offer excellent EMC characteristics are particularly
suited to difficult industrial environments.
The selling in lots is mainly intended for machine manufacturers.

Important ordering requirement

Pressure and vacuum switches XMLG are factory set, the upper and lower switching
thresholds must be stated when ordering.

7
8
9
10

2/10

Characteristics

Electronic pressure sensors


OsiSense XM, type XMLG
For control circuits

Environment characteristics
Conformity to standards

e
IEC/EN 60947-1, IEC/EN 60947-5-1
EN 50081-1, EN 50082-2, EN 61000-6-2

Product certifications

UL, CSA

Rated supply voltage

Voltage limits

Current consumption

Transmitters 4-20 mA
Pressure/vacuum switches
Transmitters 0-10 V

c12/24

c24

Transmitters 4-20 mA
Pressure/vacuum switches
Transmitters 0-10 V

c833

c11.433

Pressure/vacuum switches
Transmitters

mA
mA

<4
<20
Standard version "TC"

For operation
For storage

C
C

-15+85
-40+85
Hydraulic oils, air, fresh water, sea water, corrosive fluids from -15+ 125C

Protective treatment
Ambient air temperature
Fluids or products controlled
Component materials in contact with fluid
Operating position

Ceramic Al2O3, stainless steel type AISI 303, FPM (Viton),


PPS (Leakage protection for P > 40 bar)
All positions

Vibration resistance

20 gn (92000 Hz) conforming to IEC60068-2-6

Shock resistance

25 gn (half sine wave 11ms) conforming to IEC 60068-2-27

Resistance to electromagnetic Electrostatic discharges


interference
Radiated electromagnetic fields
Fast transients
Surges
Conducted disturbances,
induced by radio frequency fields
Magnetic fields

Standard EN61000-4-2, 15kV in air, 8kV on contact


Standard EN61000-4-3, 200V/m, 801000MHz
Standard EN 61000-4-4, 4 kV
Standard EN61000-4-5, 500V 12W, 1kV 42W
Standard EN 61000-4-6, 30 V 0.1580MHz

Electrical protection

Protected against reverse polarity and load short-circuit

Rated impulse withstand voltage

2
3
4
5

Standard EN 61000-4-8, 30A/m, 50Hz

kV

Degree of protection

0.5
IP 66, IP67 conforming to IEC/EN60529, NEMA4

Output response time

ms

Repeat accuracy
Precision

<2

0.1% of the measuring range


Transmitters

Combined sum of linearity, hysteresis and repeat accuracy < 0.3% of the
measuring range
Setting tolerance of zero point and measuring range limit < 0.3% of the
measuring range

Drift
Service life

Pressure/vacuum switches
Of the zero point
Of the sensitivity
In millions of operating cycles

Setting accuracy < 1% of the measuring range


< 0.015% of the measuring range/C
< 0.015% of the measuring range/C
> 10

Fluid connection

G 1/4 A (BSP male) conforming to ISO 7

Electrical connection

M12 connector or integrated connection (1)

8
9

(1) Phoenix Contact "Quickon" type integrated connection.

10

2/11

Electronic pressure sensors

References,
characteristics

OsiSense XM, Pressure transmitters, type XML G


With analogue output 4-20 mA and 0-10 V
Sizes - 1 to 6 bar (-14.5 to 87 psi)

Units with analogue output

1
2
3

Pressure range (1)


Type of electrical connection (2)

- 1 0 bar (-14.5 0 psi)


M12
Integrated quick
connection (3)

01 bar (014.5 psi)


M12
Integrated quick
connection (3)

06 bar (087 psi)


M12
Integrated quick
connection (3)

XML GM01D21

XMLG001D21

XMLG006D21

bulk (4)

XMLGM01D21TQ XMLGM01Q21TQ XMLG001D21TQ XMLG001Q21TQ XMLG006D21TQ XMLG006Q21TQ


(4)
(4)
(4)
(4)
(4)
(4)

References

Pressure transmitters, 4-20 mA


Sold in packs of:

4
5
6

Pressure transmitters, 0-10 V


Sold in packs of:

1
bulk (4)

Fluid connection (5)


Weight (kg)

Rated supply voltage


Voltage limits
Analogue output
Current consumption
Maximum permissible accidental
pressure
Destruction pressure
Electrical connection

XMLG001D71

XMLG006D71

XMLGM01Q71TQ XMLG001D71TQ XMLG001Q71TQ XMLG006D71TQ XMLG006Q71TQ


(4)
(4)
(4)
(4)
(4)
0.095

0.095

0.095

c 12/24 V
c 833 V
420 mA, 2-wire technique, or 0-10 V, 3-wire technique
< 20 mA
2.7 bar (39.1 psi)
2.7 bar (39.1 psi)

17.6 (255.20 psi)

3 bar (43.5 psi)


3 bar (43.5 psi)
20 (290 psi)
By connector XMLGpppD21: M12, 3-pin male. For suitable female connectors, including pre-wired versions, see pages 2/20 and 2/21

7
Output curves

Complementary characteristics not shown under general characteristics

Integrated

XMLGM01D71
XMLGM01D71TQ
(4)
G 1/4 A (male)
0.095

XMLGpppQ21: integrated quick connection (3)


(1) Other pressure ranges, please consult our Customer Care Centre.
(2) Other connections (AMP connector, cable, etc.), please consult our Customer Care Centre.
(3) Phoenix Contact "Quickon" type integrated connection.
(4) Sold in lots of 25, minimum quantity 50.
(5) Other fluid connections (G 1/4, 1/4 NPT, etc.), please consult our Customer Care Centre.
Component materials of units in contact with the fluid, see page 2/11.

XMLGM01p21

XMLG001p21

XMLG006p21

XMLGpppp71

Is (mA)
20

Is (mA)
20

Is (mA)
20

Us (V)
10

16

16

16

12

12

12

4
-1

-0,8

-0,6

-0,4

-0,2

0
P (bar)

0,2

0,4

0,6

0,8

1
P (bar)

10
Accessories:
page 2/20

2/12

Dimensions:
page 2/21

Schemes:
page 2/21

6
P (bar)

50 %

100 %
P (bar)

Electronic pressure sensors

References,
characteristics

OsiSense XM, Pressure transmitters, type XML G


With analogue output 4-20 mA and 0-10 V
Sizes 10 to 25 bar (145 to 362.5 psi)

Units with analogue output

1
2
Pressure range (1)
Type of electrical connection (2)

010 bar (0145 psi)


M12
Integrated quick
connection (3)

016 bar (0362.5 psi)


M12
Integrated quick
connection (3)

025 bar (0362.5 psi)


M12
Integrated quick
connection (3)

XMLG010D21

XMLG016D21

XMLG025D21

bulk (4)

XMLG010D21TQ XMLG010Q21TQ XMLG016D21TQ XMLG016Q21TQ XMLG025D21TQ XMLG025Q21TQ


(4)
(4)
(4)
(4)
(4)
(4)

References

Pressure transmitters, 4-20 mA


Sold in packs of:

Pressure transmitters, 0-10 V


Sold in packs of:

XMLG010D71

bulk (4)

XMLG010D71TQ XMLG010Q21TQ XMLG016D71TQ XMLG016Q71TQ XMLG025D71TQ XMLG025Q71TQ


(4)
(4)
(4)
(4)
(4)
(4)
G 1/4 A (male)
0.095
0.095
0.095
0.095
0.095
0.095

Fluid connection (5)


Weight (kg)

XMLG016D71

XMLG025D71

Complementary characteristics not shown under general characteristics

Rated supply voltage


Voltage limits
Analogue output
Current consumption
Maximum permissible accidental
pressure
Destruction pressure
Electrical connection

c 12/24 V
c 833 V
420 mA, 2-wire technique, or 0-10 V, 3-wire technique
< 20 mA
22 bar (319 psi)
35.20 (510.4 psi)

56 bar (812 psi)

Output curves

XMLG016p21

XMLG025p21

XMLGpppp71

Is (mA)
20

Is (mA)
20

Is (mA)
20

Us (V)
10

16

16

16

12

12

12

10
P (bar)

10 12 14 16
P (bar)

5
6

25 bar (362.5 psi)


40 (580 psi)
62.5 bar (906.2 psi)
By connector XMLGpppD21: M12, 3-pin male. For suitable female connectors, including
pre-wired versions, see pages 2/20 and 2/21
Integrated
XMLGpppQ21: integrated quick connection (3)
(1) Other pressure ranges, please consult our Customer Care Centre.
(2) Other connections (AMP connector, cable, etc.), please consult our Customer Care Centre.
(3) Phoenix Contact "Quickon" type integrated connection.
(4) Sold in lots of 25, minimum quantity 50.
(5) Other fluid connections (G 1/4, 1/4 NPT, etc.), please consult our Customer Care Centre.
Component materials of units in contact with the fluid, see page 2/11.

XMLG010p21

7
8

9
0

10

15

20

25
P (bar)

50 %

100 %
P (bar)

10
Accessories:
page 2/20

Dimensions:
page 2/21

Schemes:
page 2/21

2/13

Electronic pressure sensors

References,
characteristics

OsiSense XM, Pressure transmitters, type XMLG


With analogue output 4-20 mA and 0-10 V
Sizes 100 to 250 bar (1450 to 3625 psi)

Units with analogue output

1
2
3

Pressure range (1)


Type of electrical connection (2)

0100 bar (0...1450 psi)


M12
Integrated quick
connection (3)

References

0250 bar (0...3625 psi)


M12
Integrated quick
connection (3)

Pressure transmitters, 4-20 mA


Sold in packs of:

1
bulk (4)

XMLG100D21
XMLG100D21TQ (4)

XMLG250D21
XMLG100Q21TQ (4) XMLG250D21TQ (4)

XMLG250Q21TQ (4)

XMLG100D71
XMLG100D71TQ (4)
G 1/4 A (male)
0.095

XMLG250D21
XMLG100Q71TQ (4) XMLG250D71TQ (4)

XMLG250Q71TQ (4)

0.095

0.095

Pressure transmitters, 0-10 V


Sold in packs of:

1
bulk (4)

Fluid connection (5)


Weight (kg)

Complementary characteristics not shown under general characteristics

Rated supply voltage


Voltage limits
Analogue output
Current consumption
Maximum permissible accidental pressure
Destruction pressure
Electrical connection
By connector

Integrated

0.095

c 12/24 V
c 833 V
420 mA, 2-wire technique, or 0-10 V, 3-wire technique
< 20 mA
225 bar (3262.5 psi)
560 bar (8120 psi)
250 bar (3625 psi)
625 bar (9062.5 psi)
XMLGpppD21: M12, 3-pin male. For suitable female connectors, including pre-wired versions,
see pages 2/20 and 2/21
XMLGpppQ21: integrated quick connection (3)
(1) Other pressure ranges, please consult our Customer Care Centre.
(2) Other connections (AMP connector, cable, etc.), please consult our Customer Care Centre.
(3) Phoenix Contact "Quickon" type integrated connection.
(4) Sold in lots of 25, minimum quantity 50.
(5) Other fluid connections (G 1/4, 1/4 NPT, etc.), please consult our Customer Care Centre.
Component materials of units in contact with the fluid, see page 2/11.

7
Output curves

8
9

XMLG100p21

XMLG250p21

XMLGpppp71

Is (mA)
20

Is (mA)
20

Us (V)
10

16

16

12

12

4
0

20

40

60

80

100 P (bar)

10
Accessories:
page 2/20

2/14

Dimensions:
page 2/21

Schemes:
page 2/21

50

100

150

200

250 P (bar)

50 %

100 %
P (bar)

Electronic pressure sensors

References,
characteristics

OsiSense XM, Pressure transmitters, type XMLG


With analogue output 4-20 mA and 0-10 V
Size 400 bar (5800 psi)

Units with analogue output

1
2
Pressure range (1)
Type of electrical connection (2)

0400 bar (05800 psi)


M12

Integrated quick connection (3)

XMLG400D21
XMLG400D21TQ (4)

XMLG400Q21TQ (4)

XMLG400D71
XMLG400D71TQ (4)
G 1/4 A (male)
0.095

XMLG400Q71TQ (4)

References

Pressure transmitters, 4-20 mA

Sold in packs of:

1
bulk (4)

Pressure transmitters, 0-10 V


Sold in packs of:

1
bulk (4)

Fluid connection (5)


Weight (kg)

Complementary characteristics not shown under general characteristics

Rated supply voltage


Voltage limits
Analogue output
Current consumption
Maximum permissible accidental pressure
Destruction pressure
Electrical connection
By connector
Integrated

0.095

c 12/24 V
c 833 V
420 mA, 2-wire technique, or 0-10 V, 3-wire technique
< 20 mA
800 bar (11,600 psi)
900 bar (13,050 psi)
XMLGpppD21: M12, 3-pin male. For suitable female connectors, including pre-wired versions,
see pages 2/20 and 2/21
XMLGpppQ21: integrated quick connection (3)
(1) Other pressure ranges, please consult our Customer Care Centre.
(2) Other connections (AMP connector, cable, etc.), please consult our Customer Care Centre.
(3) Phoenix Contact "Quickon" type integrated connection.
(4) Sold in lots of 25, minimum quantity 50.
(5) Other fluid connections (G 1/4, 1/4 NPT, etc.), please consult our Customer Care Centre.
Component materials of units in contact with the fluid, see page 2/11.

5
6
7

Output curves

XMLG400p21

XMLGpppp71

Is (mA)
20

Us (V)
10

16

12

50 100 150 200 250 300 350 400 P (bar)

50 %

100 %
P (bar)

10
Accessories:
page 2/20

Dimensions:
page 2/21

Schemes:
page 2/21

2/15

Electronic pressure sensors0

References,
characteristics

OsiSense XM, Pressure and vacuum switches, type XMLG


Sizes - 1 to 1 bar (- 14.5 to 14.5 psi)

Units with solid-state output (1)

1
2
- 0.08- 1 bar (- 1.16- 14.5 psi)

0.081 bar (1.1614.5 psi)

M12

M12

Integrated quick
connection (4)

References
Only sold in bulk packs (5)

Fluid connection (6)


Weight (kg)

Complementary characteristics not shown under general characteristics

Switching thresholds (7)


Possible differential

5
6

Min. at low setting


Min. at high setting
Max. at high setting
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Output
Switching capacity
Current consumption
Electrical connection
By connector
Integrated

7
8

Integrated quick
connection (4)

XMLGM01D31TQ (5) XMLGM01Q31TQ (5) XMLG001D31TQ (5)


XMLGM01D41TQ (5) XMLGM01Q41TQ (5) XMLG001D41TQ (5)
G 1/4 A (male)
0.095
0.095
0.095

Operating curves

XMLGM01pp1

bar
1

-0,05 0
-0,08

9
2

-0,5

1 Maximum differential
2 Minimum differential
-1
bar

Accessories:
page 2/20

2/16

Dimensions:
page 2/21

0.095

XMLG001pp1

Rising pressure
bar
-0,97
-0,5

10

XMLG001Q31TQ (5)
XMLG001Q41TQ (5)

Factory set
0.03 bar (0.44 psi)
0.03 bar (0.44 psi)
0.03 bar (0.44 psi)
0.03 bar (0.44 psi)
0.95 bar (13.77 psi)
0.95 bar (13.77 psi)
2.7 bar (39.1 psi)
2.7 bar (39.1 psi)
3 bar (43.5 psi)
3 bar (43.5 psi)
c 12/24 V
c 833 V
Solid-state NPN or PNP, NC
150 mA
< 4 mA
XMLGpppDpp: M12, 3-pin male. For suitable female connectors, including pre-wired versions,
see pages 2/20 and 2/21
XMLGpppQpp: integrated quick connection (4)
(1) Other types of output (normally open PNP, NPN, etc.), please consult our Customer
Care Centre.
(2) Other pressure ranges, please consult our Customer Care Centre.
(3) Other connections (AMP connector, cable, etc.), please consult our Customer Care Centre.
(4) Phoenix Contact "Quickon" type integrated connection.
(5) Sold in lots of 25, minimum quantity 50.
(6) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from -15+125C.
Component materials of units in contact with the fluid, see page 2/11.
Other fluid connections (G 1/4, 1/4 NPT, etc.), please consult our Customer Care Centre.
(7) State the switching threshold settings when ordering.
(8) For vacuum switches (size - 1 bar): adjustable range of switching point (PB) on falling pressure.

Schemes:
page 2/21

Rising pressure

NPN output
PNP output

Falling pressure

Adjustable range of switching point (PH)


Rising pressure (2) (8)
Type of electrical connection (3)

0,5

0,08
0 0,05

0,97bar
0,5
Falling pressure

Electronic pressure sensors

References,
characteristics

OsiSense XM, Pressure switches type XMLG


Sizes 10 to 25 bar (145 to 362.5 psi)

Units with solid-state output (1)

1
2
Adjustable range of switching point (PH)
Rising pressure (2)
Type of electrical connection (3)

0.810 bar (11.6145 psi)

225 bar (29362.5 psi)

M12

Integrated quick
connection (4)

M12

XMLG010D31TQ (5)
XMLG010D41TQ (5)
G 1/4 A (male)
0.095

XMLG010Q31TQ (5) XMLG025D31TQ (5)


XMLG010Q41TQ (5) XMLG025D41TQ (5)

XMLG025Q31TQ (5)
XMLG025Q41TQ (5)

0.095

0.095

References
Only sold in bulk packs (5)

NPN output
PNP output

Fluid connection (6)


Weight (kg)

Complementary characteristics not shown under general characteristics

Switching thresholds (7)


Possible differential

Min. at low setting


Min. at high setting
Max. at high setting
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Output
Switching capacity
Current consumption
Electrical connection
By connector
Integrated

Operating curves

Integrated quick
connection (4)

0.095

Factory set
0.3 bar (4.4 psi)
0.75 bar (10.9 psi)
0.3 bar (4.4 psi)
0.75 bar (10.9 psi)
9.5 bar (137.75 psi)
23.8 bar (345.1 psi)
22 bar (319 psi)
56 bar (812 psi)
25 bar (362.5 psi)
62.5 bar (906.2 psi)
c 12/24 V
c 833 V
Solid-state, NPN or PNP, NC
150 mA
< 4 mA
XMLGpppDpp: M12, 3-pin male. For suitable female connectors, including pre-wired versions,
see pages 2/20 and 2/21
XML-GpppQpp: integrated quick connection (4)
(1) Other types of output (normally open PNP, NPN, etc.), please consult our Customer
Care Centre.
(2) Other pressure ranges, please consult our Customer Care Centre.
(3) Other connections (AMP connector, cable, etc.), please consult our Customer Care Centre.
(4) Phoenix Contact "Quickon" type integrated connection.
(5) Sold in lots of 25, minimum quantity 50.
(6) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from -15+125C
Component materials of units in contact with the fluid, see page 2/11.
Other fluid connections (G 1/4, 1/4 NPT, etc.), please consult our Customer Care Centre.
(7) State the switching threshold settings when ordering.

XMLG010pp1

5
6
7
8

XMLG025pp1
bar
25
Rising pressure

bar
10
Rising pressure

1
5

20

1
10

1 Maximum differential
2 Minimum differential

0 0,5

Accessories:
page 2/20

Dimensions:
page 2/21

0,8
5

9,7 bar
Falling pressure

0 1,2

10

20 24,2 bar
Falling pressure

Schemes:
page 2/21

2/17

10

Electronic pressure sensors

References,
characteristics

OsiSense XM, Pressure switches type XMLG


Sizes 100 to 250 bar (1450 to 3625 psi)

Units with solid-state output (1)

1
2
3

Adjustable range of switching point (PH)


Rising pressure (2)
Type of electrical connection (3)

8100 bar (11.61450 psi)

20250 bar (293625 psi)

M12

Integrated quick
connection (4)

M12

XMLG100D31TQ (5)
XMLG100D41TQ (5)
G 1/4 A (male)
0.095

XMLG100Q31TQ (5) XMLG250D31TQ (5)


XMLG100Q41TQ (5) XMLG250D41TQ (5)

XMLG250Q31TQ (5)
XMLG250Q41TQ (5)

0.095

0.095

References

Integrated quick
connection (4)

Only sold in bulk packs (5)

NPN output
PNP output
Fluid connection (6)
Weight (kg)

Complementary characteristics not shown under general characteristics

Switching thresholds (7)


Possible differential

5
6

Min. at low setting


Min. at high setting
Max. at high setting
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Output
Switching capacity
Current consumption
Electrical connection
By connector
Integrated

7
8

Operating curves

0.095

Factory set
3 bar (43.5 psi)
7.5 bar (108.8 psi)
3 bar (43.5 psi)
7.5 bar (108.8 psi)
95 bar (1377.5 psi)
237.5 bar (3443.7 psi)
225 bar (3262.5 psi)
560 bar (8120 psi)
250 bar (3625 psi)
625 bar (9062.5 psi)
c 12/24 V
c 833 V
Solid-state, NPN or PNP, NC
150 mA
< 4 mA
XMLGpppDpp: M12, 3-pin male. For suitable female connectors, including pre-wired versions,
see pages 2/20 and 2/21
XMLGpppQpp: integrated quick connection (4)
(1) Other types of output (normally open PNP, NPN, etc.), please consult our Customer
Care Centre.
(2) Other pressure ranges, please consult our Customer Care Centre.
(3) Other connections (AMP connector, cable, etc.), please consult our Customer Care Centre.
(4) Phoenix Contact "Quickon" type integrated connection.
(5) Sold in lots of 25, minimum quantity 50.
(6) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from -15+125C
Component materials of units in contact with the fluid, see page 2/11.
Other fluid connections (G 1/4, 1/4 NPT, etc.), please consult our Customer Care Centre.
(7) State the switching threshold settings when ordering.

XMLG100pp1TQ

XMLG250pp1TQ
bar
250

50

Rising pressure

Rising pressure

bar
100

200

1
100

1 Maximum differential
2 Minimum differential

10

Accessories:
page 2/20

2/18

Dimensions:
page 2/21

20

8
5

Schemes:
page 2/21

50

97 bar
Falling pressure

0 12,5

100

200 242,5 bar


Falling pressure

Electronic pressure sensors

References,
characteristics

OsiSense XM, Pressure switches type XMLG


Size 400 bar (5800 psi)

Units with solid-state output (1)

1
2
Adjustable range of switching point (PH)
Rising pressure (2)
Type of electrical connection (3)

32400 bar (4645800 psi)


M12

Integrated quick connection (4)

XMLG400D31TQ (5)
XMLG400D41TQ (5)
G 1/4 A (male)
0.095

XMLG400Q31TQ (5)
XMLG400Q41TQ (5)

References
Only sold in bulk packs (5)
NPN output
PNP output
Fluid connection (6)
Weight (kg)

Complementary characteristics not shown under general characteristics

Switching thresholds (7)


Possible differential

Min. at low setting


Min. at high setting
Max. at high setting
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Output
Switching capacity
Current consumption
Electrical connection
By connector
Integrated

Operating curve

0.095

Factory set
12 bar (174 psi)
12 bar (174 psi)
380 bar (5510 psi)
800 bar (11,600 psi)
900 bar (13,050 psi)
c 12/24 V
c 833 V
Solid-state NPN or PNP, NC
150 mA
< 4 mA
XMLGpppDpp: M12, 3-pin male. For suitable female connectors, including pre-wired versions,
see pages 2/20 and 2/21
XMLGpppQpp: integrated quick connection (4)
(1) Other types of output (normally open PNP, NPN, etc.), please consult our Customer
Care Centre.
(2) Other pressure ranges, please consult our Customer Care Centre.
(3) Other connections (AMP connector, cable, etc.), please consult our Customer Care Centre.
(4) Phoenix Contact "Quickon" type integrated connection.
(5) Sold in lots of 25, minimum quantity 50.
(6) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from -15+125C
Component materials of units in contact with the fluid, see page 2/11.
Other fluid connections (G 1/4, 1/4 NPT, etc.), please consult our Customer Care Centre.
(7) State the switching threshold settings when ordering.

5
6
7
8

XMLG400pp1TQ

Rising pressure

bar
400

300

200

100

1 Maximum differential
2 Minimum differential

Accessories:
page 2/20

Dimensions:
page 2/21

32
0 20

100

200

10

388 bar
300
Falling pressure

Schemes:
page 2/21

2/19

Electronic pressure sensors

References

OsiSense XM, Accessories and replacement parts for


sensors type XMLG

Connection accessories
Description
503360

563352

M12 female connector,


metalclamping ring (1)

XZCP1141Lp

Straight

Length
ofcable
m

XZCC12FDM40B

kg
0.020

Elbowed

XZCC12FCM40B

0.020

XZCP1141L2

0.090

XZCP1141L5

0.190

10

XZCP1141L10

0.370

XZCP1241L2

0.090

XZCP1241L5

0.190

10

XZCP1241L10

0.370

Sold in
lots of

Unit
reference

10

XML GZ001

Pre-wired M12 female connectors Straight

2
532711

XZCP1241Lp

Elbowed

XZ CC12FCM40B

Reference

Weight

Replacement part

532715

Description
Quick connection (2)
(1) Connector with screw terminal connections.
(2) Phoenix Contact "Quickon" type connection.

5
XML GZ001

6
7
8
9
10

2/20

Weight
kg
0.025

Electronic pressure sensors

Dimensions, schemes

OsiSense XM

Transmitters and Pressure switches type XMLG


For control circuits

Dimensions

XML GpppDpp, M12x1 connection

~ 90

22,8
18,8 0,1
G 1/4

SW 21

2
8

12

56

2,1

3
XML GpppQpp, integrated quick connection
~ 85
SW 21

22,8
18,8 0,1
G 1/4

4
5

12

64

2,1

Connector schemes (pressure sensor connector pin view)


Electronic pressure switches

Pressure transmitters

M12

M12

3-wire technique (PNP)


Input

Integrated quick
connection
3-wire technique (PNP)

1 4

Input

Output

2-wire technique (4-20 mA)


Input

+
1

1
3

2-wire technique (4-20 mA)

Input

4
3

1
3

Output

GND

Output

3-wire technique (NPN)


Input

GND

Integrated quick connection

3-wire technique (NPN)

Input

Output

3-wire technique (0-10 V)


Input

3-wire technique (0-10 V)

Input

GND

GND

1 4
3

Output
GND

1
3

1 4

GND

1
3

Output

Output
Output

10

2/21

Electronic pressure sensors

Presentation

OsiSense XM

For control circuits, type XML K

Presentation

1
2

1 Electrical connection, for example: DIN 43650 A connector


2 Sealing gaskets
3 Threaded fluid connection
4 Hybrid electronics
5 Measuring load cell (ceramic technology)

4
5

Pressure transmitters type XML K are characterised by their ceramic pressure


measuring cell. The deformation caused by the pressure is transmitted to the resistors
of a Wheatstone bridge silk-screened on the ceramic. The change in resistance is
then processed by the integrated electronics for providing an analogue output signal.

Functions

Pressure transmitters have an analogue 4-20 mA or 0-10 V output that is proportional


to the measuring range.
These compact products are available with various types of electrical connector and
fluid connection.
As standard, versions are available calibrated in bar and psi.
The selling in lots option offers an excellent price/performance ratio. Electronic
pressure sensors XML K are, therefore, mainly intended for pump manufacturers.

The sizes offered are suited to the pumping domain.

5
6
7
8
9
10

2/22

Characteristics

Electronic pressure sensors


OsiSense XM

For control circuits, type XML K

Environment characteristics

Conformity to standards

e
IEC/EN 60947-1, IEC/EN 60947-5-1
EN 50081-1, EN 50082-2, EN 61000-6-2

Product certifications

UL, CSA

Rated supply voltage

c 24 V

Voltage limits

420mA: c 833V
010 V: c 16.233V

Current consumption

420mA: < 20 mA
010V: < 6mA

Output signal

4-20mA, 0-10V

Protective treatment
Ambient air temperature

Standard version "TC"


For operation

0+ 80

For storage

- 25+ 85

Fluids or products controlled

Air, fresh water (0+ 80C)

Component materials in contact with fluid

Stainless steel, type AISI 303


nitrile (NBR)

Operating position

All positions

Vibration resistance

20 gn (92000 Hz) conforming to IEC60068-2-6

Shock resistance
Resistance to
electromagnetic
interference

25 gn (half sine wave 11ms) conforming to IEC 60068-2-27


Electrostatic discharges

Standard EN 61000-4-2, 8kV in air, 6kV on contact

Radiated electromagnetic fields

Standard EN 61000-4-3, >10 V/m, 80.1000MHz

Fast transients

Standard EN 61000-4-4, 2kV

Surges

Standard EN 61000-4-5, 500 V 12 , 1kV 42

Conducted disturbances,
induced by radio frequency fields

Standard EN 61000-4-6, 10V 0.1580MHz

Magnetic fields

Standard EN 61000-4-8, 30A/m, 50Hz

Electrical protection

Protected against reverse polarity and load short-circuit

Rated impulse withstand voltage

kV

Degree of protection

0.5
IP 65 conforming to IEC/EN 60529, NEMA 4

Output response time

ms

<2

Repeat accuracy

0.3% of the measuring range

Precision (resolution)

Combined sum of linearity, hysteresis and repeat accuracy < 0.5% of the
measuring range
Setting tolerance of zero point and measuring range limit < 1% of the measuring range

Drift

Of the zero point


Of the sensitivity

< 0.03% of the measuring range/K

Service life

Operating cycles

> 10 million

< 0.04 % of the measuring range/K

Fluid connection

G 1/4 A (BSP male) conforming to ISO 7, or 1/4"-18NPT male

Electrical connection

Connector, either: M12 or DIN 43650 A (DIN EN 175301-803-A) or Metri-Pack (Packard)

6
7
8
9
10

2/23

Electronic pressure sensors

References,
characteristics

OsiSense XM

Pressure transmitters type XML K, bar version


With analogue output 4-20 mA
Sizes 0 to 25 bar (0 to 362 psi)

Pressure transmitters type XML K, bar version, DIN 43650 A connector or M12 connector (1)

DIN 43650 A connector

M12 connector

06 bar (087 psi) 010 bar


(0145 psi)

016 bar
(0232 psi)

025 bar
(0362.5 psi)

XML K016B2C21

XML K025B2C21

2
3
Pressure range

References

Pressure transmitters XML K, DIN 43650 A connector


Sold in packs of:

XML K006B2C21

XML K006B2C21TQ XML K010B2C21TQ

XML K010B2C21

XML K016B2C21TQ XML K025B2C21TQ

Pressure transmitters XML K, M12 connector


Sold in packs of:

1
bulk (2)
1

XML K006B2D21

bulk (2)

XML K006B2D21TQ XML K010B2D21TQ

Fluid connection (3)

G 1/4 A (male)

Weight (kg)

0.110

XML K010B2D21

0.110

XML K016B2D21

XML K025B2D21

XML K016B2D21TQ XML K025B2D21TQ


0.110

0.110

Complementary characteristics not shown under general characteristics


Rated supply voltage

c24 V

Voltage limits

c 833 V

Output (4)

420 mA, 2-wire technique

Current consumption

< 20 mA

Maximum permissible accidental pressure

12 bar (174 psi)

20 bar (290 psi)

32 bar (464 psi)

50 bar (725 psi)

Destruction pressure

18 bar (261 psi)

30 bar (435 psi)

48 bar (696 psi)

75 bar (1087.5 psi)

Electrical connection

DIN 43650 A connector

EN 175301-803-A (male). For suitable female connector see accessories on page 2/28.

M12 connector

M12, 3-pin male. For suitable female connector, including pre-wired versions, see accessories
on page 2/28.
(1) Other types of electrical connection, please consult our Customer Care Centre.
(2) Sold in lots of 25, minimum quantity 50.
(3) Other types of fluid connection, please consult our Customer Care Centre.
(4) Other types of output, please consult our Customer Care Centre.

7
Output curve

XML K0ppB2p21
Is (mA)
20

16

12

10

2/24

50 %

100 % P (bar)

References,
characteristics (continued)

Electronic pressure sensors


OsiSense XM

Pressure transmitters type XML K, bar version


With analogue output 0-10 V
Sizes 0 to 25 bar (0 to 362 psi)

Pressure transmitters type XML K, bar version, DIN 43650 A connector or M12 connector (1)
DIN 43650 A connector

M12 connector

1
2
3

Pressure range

06 bar (087 psi) 010 bar


(0145 psi)

016 bar
(0232 psi)

025 bar
(0362.5 psi)

XML K006B2C71

XML K016B2C71

XML K025B2C71

bulk (2)

XML K006B2C71TQ XML K010B2C71TQ

XML K016B2C71TQ

XML K025B2C71TQ

XML K006B2D71

XML K016B2D71

XML K025B2D71

bulk (2)

XML K006B2D71TQ XML K010B2D71TQ

XML K016B2D71TQ

XML K025B2D71TQ

0.110

0.110

5
6

References

Pressure transmitters XML K, DIN 43650 A connector

Sold in packs of:

XML K010B2C71

Pressure transmitters XML K, M12 connector


Sold in packs of:
Fluid connection (3)

G 1/4 A (male)

Weight (kg)

0.110

XML K010B2D71

0.110

Complementary characteristics not shown under general characteristics

Rated supply voltage

c 24 V

Voltage limits

c 16.233 V

Output (4)

010 V, 3-wire technique

Current consumption

< 6 mA

Maximum permissible accidental pressure

12 bar (174 psi)

20 bar (290 psi)

32 bar (464 psi)

50 bar (725 psi)

Destruction pressure

18 bar (261 psi)

30 bar (435 psi)

48 bar (696 psi)

75 bar (1087.5 psi)

Electrical connection

DIN 43650 A connector

EN 175301-803-A (male). For suitable female connector see accessories on page 2/28.

M12 connector

M12, 3-pin male. For suitable female connector, including pre-wired versions, see accessories
on page 2/28.
(1) Other types of electrical connection, please consult our Customer Care Centre.
(2) Sold in lots of 25, minimum quantity 50.
(3) Other types of fluid connection, please consult our Customer Care Centre.
(4) Other types of output, please consult our Customer Care Centre.

Output curve
XML K0ppB2p71
Us (V)
10

8
5

9
0

50 %

100 % P (bar)

10

2/25

References,
characteristics (continued)

Electronic pressure sensors

OsiSense XM

Pressure transmitters type XML K, PSI version


With analogue output 4-20 mA
Sizes 0 to 300 psi (0 to 20.7 bar)

Pressure transmitters type XML K, PSI version, DIN 43650 A, M12 or Packard connector (1)
DIN 43650 A connector

M12 connector

Packard connector

2
3
Pressure range

0100 psi
(06.9 bar)

0150 psi
(010.3 bar)

0200 psi
(013.8 bar)

0300 psi
(0.20.7 bar)

XML K100P2C23

XML K150P2C23

XML K200P2C23

XML K300P2C23

bulk (2)

XML K100P2C23TQ

XML K150P2C23TQ

XML K200P2C23TQ

XML K300P2C23TQ

XML K100P2D23

XML K150P2D23

XML K200P2D23

XML K300P2D23

bulk (2)

XML K100P2D23TQ

XML K150P2D23TQ

XML K200P2D23TQ

XML K300P2D23TQ

XML K100P2P23

XML K150P2P23

XML K200P2P23

XML K300P2P23

bulk (2)

XML K100P2P23TQ

XML K150P2P23TQ

XML K200P2P23TQ

XML K300P2P23TQ

0.110

0.110

0.110

References

Pressure transmitters XML K, DIN 43650 A connector


Sold in packs of:

Pressure transmitters XML K, M12 connector


Sold in packs of:

5
6
7
8

Pressure transmitters XML K, Packard connector


Sold in packs of:
Fluid connection (3)

1/4"-18NPT male

Weight (kg)

0.110

Complementary characteristics not shown under general characteristics

Rated supply voltage

c 24 V

Voltage limits

c 833 V

Output (4)

420 mA, 2-wire technique

Current consumption

< 20 mA

Maximum permissible accidental pressure

200 psi (13.8 bar)

300 psi (20.7 bar)

400 psi (27.5 bar)

600 psi (41 bar)

Destruction pressure

300 psi (20.7 bar)

450 psi (31 bar)

600 psi (41 bar)

900 psi (62 bar)

Electrical connection

DIN 43650 A connector

EN 175301-803-A (male). For suitable female connector see accessories on page 2/28.

M12 connector

M12, 3-pin male. For suitable female connector, including pre-wired versions, see accessories
on page 2/28.

Packard connector

3-pin Delphi (Packard) Metri-Pack 150 series.


(1) Other types of electrical connection, please consult our Customer Care Centre.
(2) Sold in lots of 25, minimum quantity 50.
(3) Other types of fluid connection, please consult our Customer Care Centre.
(4) Other types of output, please consult our Customer Care Centre.

Output curve

XML K1ppP2p23
Is (mA)
20

16

12

10

2/26

50 %

100 % P (psi)

References,
characteristics (continued)

Electronic pressure sensors


OsiSense XM

Pressure transmitters type XML K, PSI version


With analogue output 0-10 V
Sizes 0 to 300 psi (0 to 20.7 bar)

Pressure transmitters type XML K, PSI version, DIN 43650 A, M12 or Packard connector (1)
DIN 43650 A connector

M12 connector

Packard connector

1
2
3

Pressure range

0100 psi
(06.9 bar)

0150 psi
(010.3 bar)

0200 psi
(013.8 bar)

0300 psi
(020.7 bar)

XML K100P2C73

XML K150P2C73

XML K200P2C73

XML K300P2C73

bulk (2)

XML K100P2C73TQ

XML K150P2C73TQ

XML K200P2C73TQ

XML K300P2C73TQ

XML K100P2D73

XML K150P2D73

XML K200P2D73

XML K300P2D73

bulk (2)

XML K100P2D73TQ

XML K150P2D73TQ

XML K200P2D73TQ

XML K300P2D73TQ

XML K100P2P73

XML K150P2P73

XML K200P2P73

XML K300P2P73

XML K100P2P73TQ

XML K150P2P73TQ

XML K200P2P73TQ

XML K300P2P73TQ

0.110

0.110

0.110

References

Pressure transmitters XML K, DIN 43650 A connector

Sold in packs of:

Pressure transmitters XML K, M12 connector


Sold in packs of:

Pressure transmitters XML K, Packard connector


Sold in packs of:

1
bulk (2)

Fluid connection (3)

1/4"-18NPT male

Weight (kg)

0.110

Complementary characteristics not shown under general characteristics

Rated supply voltage

c 24 V

Voltage limits

c 16.233 V

Output (4)

010 V, 3-wire technique

Current consumption

< 6 mA

Maximum permissible accidental pressure

200 psi (13.8 bar)

300 psi (20.7 bar)

400 psi (27.5 bar)

600 psi (41 bar)

Destruction pressure

300 psi (20.7 bar)

450 psi (31 bar)

600 psi (41 bar)

900 psi (62 bar)

Electrical connection

DIN 43650 A connector

EN 175301-803A (male). For suitable female connector see accessories on page 2/28.

M12 connector

M12, 3-pin male. For suitable female connector, including pre-wired versions, see accessories
on page 2/28.

Packard connector

3-pin Delphi (Packard) Metri-Pack 150 series.


(1) Other types of electrical connection, please consult our Customer Care Centre.
(2) Sold in lots of 25, minimum quantity 50.
(3) Other types of fluid connection, please consult our Customer Care Centre.
(4) Other types of output, please consult our Customer Care Centre.

Output curve

7
8

XML K1ppP2p73
Us (V)
10

9
5

10
0

50 %

100 % P (psi)

2/27

Electronic pressure sensors

References, schemes

Pressure transmitters type XML K


Accessories

Connection accessories

Description

M12 female connector,


metal clamping ring (1)
XZ CC12FDM40B

XZ CC12FCM40B

Description
Pre-wired M12, straight, female
connectors
XZ CC43FCP40B

Pre-wired M12, elbowed, female


connectors

Straight

XZ CC12FDM40B

0.020

Elbowed

XZ CC12FCM40B

0.020

XZ CC43FCP40B

0.035

XZ CP1141L10

XZCP1241L5

Connector schemes (pressure sensor connector pin view)


Pressure transmitters XML K

2-wire technique (4-20 mA)


DIN

M12

Input

Packard

+
1

Input

Output

M12
Input

3-wire technique (0-10 V)


DIN

Packard

Input

1 4

Output

3
Output

Output

C
B

9
10

2/28

Weight
kg

Length
of cable

Reference

2m

XZCP1141L2

0.090

5m

XZCP1141L5

0.190

10 m

XZ CP1141L10

0.370

2m

XZCP1241L2

0.090

5m

XZCP1241L5

0.190

10 m

XZCP1241L10

0.370

(1) Connector with screw terminal connections.

5
6

Reference

DIN 43650 female connector (1)

Type

Weight
kg

Dimensions

Electronic pressure sensors

Pressure transmitters type XML K

Dimensions

XML K, DIN connector


NPT

G 1/4 A (male)

1/4-18 NPT

86

SW19

G 1/4

36

12.7

18.8 0.1

36

2.5

8.7

XML K, M12 connector


NPT

3
12

10.7

56.8

G 1/4 A (male)

1/4-18 NPT

93

SW19

12.7

12

8.7

XML K, Packard connector


NPT

G 1/4

18.8 0.1

36

36

2.5

10.7

56.8

G 1/4 A (male)

1/4-18 NPT

91
SW19

12.7

8.7

G 1/4

18.8

36

36

0.1

2.5

12 10.7

56.8

9
10

2/29

Electronic pressure sensors

Presentation,
principle

OsiSense XM, type XMLE

Presentation

Pressure switches and pressure transmitters type XMLE are characterised by their
ceramic pressure measuring cell.
1 Threaded fluid entry.
2 Sealing gaskets.

6
7

3 Measuring load cell (ceramic technology).

4 Electronic card.

5 Electrical connector.

6 Adjustment potentiometer for switching point PH (rising pressure).


Only applicable to pressure switches.

7 Adjustment potentiometer for switching point PB (falling pressure).


Only applicable to pressure switches.

4
Operating principle

Pressure switches XMLE incorporate a solid-state NPN or PNP NC output. Two


potentiometers enable the setting of the PH (rising pressure) and PB (falling
pressure) switching points.
Pressure transmitters XMLE provide a 4-20 mA analogue output which is
proportional to the measuring range.

A digital display unit can be directly plugged-in between the male and female
DIN43650A connectors.
Simple unrestricted positioning of the display unit + sensor + connector.
The display can be adjusted to enable reading from any direction (360 orientation
both vertically and horizontally).

7
8
9
10
30365-2-DESSINS
2/30

Characteristics

Electronic pressure sensors


OsiSense XM, type XMLE

Characteristics
Conformity to standards

e, EN 50081, EN 50082

Product certifications

UL, CSA

Protective treatment

Standard version "TC"

Ambient air temperature

For operation: - 15...+ 80

Fluids or products controlled

Hydraulic oils, air, fresh water, sea water, corrosive fluids from - 15+ 80C

Component materials in contact with fluid

Stainless steel fluid entry type AISI303, Viton gasket

Operating position

All positions

Vibration resistance

gn

5 (25200 Hz) and 35 (602000 Hz)

Shock resistance

gn

50

Electrical protection

Protected against reverse polarity, short-circuit and overload

Degree of protection

IP 65 conforming to IEC/EN 60529

Operating rate

Hz

50

Response time

ms

<5

Service life

Op.
> 10 million
cycles
Of the zero point: < 0.03% of the measuring range/C
Of the sensitivity: < 0.015% of the measuring range/C
< 0.3% of the measuring range

Drift
Precision

Fluid connection

G 1/4 A (BSP male) conforming to NF E 03-004, ISO 7

Electrical connection

DIN 43650 A or M12 connector

2
3
4
5
6
7
8
9
10

2/31

Electronic pressure sensors

References,
characteristics

OsiSense XM

Transmitters without display, type XML E (1)


Sizes - 1 to 25 bar (- 14.5 to 362.5 psi)

Type

With analogue output, fluid connection G 1/4 A (male)

1
2
3

Pressure range

0- 1 bar (0- 14.5 psi)

01 bar (014.5 psi)

Electrical connector type

DIN 43650 A

DIN 43650 A

M12

M12

References
Fluids controlled
(2)

4
5
6

Hydraulic oils, fresh water,


sea water, air, corrosive fluids,
from- 15 to + 80C

Weight (kg)

XMLEM01U1C21

XMLEM01U1D21

0.250

0.300

XMLE001U1C21
0.250

XMLE001U1D21
0.300

Complementary characteristics not shown under general characteristics (page 2/31)


Maximum permissible accidental pressure

1 bar (14.5 psi)

2 bar (29 psi)

Destruction pressure

2 bar (29 psi)

3 bar (43.5 psi)

Rated supply voltage

c 24 V

Voltage limits

c 1133 V

Output

Analogue, 420 mA, 2-wire technique

Current consumption

< 20 mA

Electrical connection

XMLEpppU1C21: DIN 43650A, 4-pin male connector. For suitable female connector,
see page 2/40.
XMLEpppU1D21: M12, 5-pin male connector. For suitable female connector, see
page 2/40.
(1) Optional digital display for sensor, see page 2/40.
(2) Component materials of units in contact with the fluid, see page 2/31.

7
8
9

Output curves
Is (mA)
20

Is (mA)
20

16

16

12

12

4
-1

-0.8

-0.6

-0.4

-0.2

0 P (bar)

Other versions

2/32

0.4

0.6

0.8

1 P (bar)

Pressure transmitters with 1/4" NPTF fluid connection. Please consult our Customer Care Centre.

10
Accessories:
page 2/40

0.2

Dimensions:
page 2/41

Schemes:
page 2/41

With analogue output, fluid connection G 1/4 A (male)

1
2
010 bar (0145 psi)

025 bar (0362.5 psi)

DIN 43650 A

M12

DIN 43650 A

M12

References
XMLE010U1D21

XMLE010U1C21
0.250

0.300

XMLE025U1C21

XMLE025U1D21

0.250

0.300

Complementary characteristics not shown under general characteristics (page 2/31)


20 bar (290 psi)

50 bar (725 psi)

30 bar (435 psi)

75 bar (1087.5 psi)

c 24 V

c 1133 V
Analogue, 420 mA, 2-wire technique
< 20 mA
XMLEpppU1C21: DIN 43650A, 4-pin male connector. For suitable female connector, see page 2/40.
XMLEpppU1D21: M12, 5-pin male connector. For suitable female connector, see page 2/40.

Output curves

Is (mA)
20

Is (mA)
20

16

16

12

12

10 P (bar)

10

15

20

25 P (bar)

10
Accessories:
page 2/40

Dimensions:
page 2/41

Schemes:
page 2/41

2/33

References,
characteristics (continued)

Type

Electronic pressure sensors


OsiSense XM

Transmitters without display, type XML E (1)


Sizes 60 to 600 bar (870 to 8700 psi)

With analogue output, fluid connection G 1/4 A (male)

1
2
3

Pressure range

060 bar (0870 psi)

Electrical connector type

DIN 43650 A

0100 bar (01450 psi)


M12

DIN 43650 A

M12

References
Fluids controlled
(2)

4
5
6

Hydraulic oils, fresh water,


sea water, air, corrosive fluids,
from- 15 to + 80C

Weight (kg)

XMLE060U1C21

XMLE060U1D21

0.270

0.320

XMLE100U1C21
0.270

XMLE100U1D21
0.320

Complementary characteristics not shown under general characteristics (page 2/31)


Maximum permissible accidental pressure

120 bar (1740 psi)

200 bar (2900 psi)

Destruction pressure

180 bar (2610 psi)

300 bar (4350 psi)

Rated supply voltage

c 24 V

Voltage limits

c 1133 V

Output

Analogue, 420 mA, 2-wire technique

Current consumption

< 20 mA

Electrical connection

XMLEpppU1C21: DIN 43650A, 4-pin male connector. For suitable female connector,
see page 2/40.
XMLEpppU1D21: M12, 5-pin male connector. For suitable female connector, see
page 2/40.
(1) Optional digital display for sensor, see page 2/40.
(2) Component materials of units in contact with the fluid, see page 2/31.

7
8
9

Output curves
Is (mA)
20

Is (mA)
20

16

16

12

12

10

20

30

40

50

60 P (bar)

Other versions

2/34

40

60

80

100 P (bar)

Pressure transmitters with 1/4" NPTF fluid connection. Please consult our Customer Care Centre.

10
Accessories:
page 2/40

20

Dimensions:
page 2/41

Schemes:
page 2/41

With analogue output, fluid connection G 1/4 A (male)

1
2
0250 bar (03625 psi)

0600 bar (08700 psi)

DIN 43650 A

M12

DIN 43650 A

M12

References
XMLE250U1D21

XMLE250U1C21
0.270

0.320

XMLE600U1C21

XMLE600U1D21

0.270

0.320

Complementary characteristics not shown under general characteristics (page 2/31)


500 bar (7250 psi)

1200 bar (17,400 psi)

750 bar (10,875 psi)

1800 bar (26,100 psi)

c 24 V

c 1133 V
Analogue, 420 mA, 2-wire technique
< 20 mA
XMLEpppU1C21: DIN 43650 A, 4-pin male connector. For suitable female connector, see page 2/40.
XMLEpppU1D21: M12, 5-pin male connector. For suitable female connector, see page 2/40.

Output curves

Is (mA)
20

Is (mA)
20

16

16

12

12

50

100

150

200

250 P (bar)

100

200

300

400

500

600 P (bar)

10
Accessories:
page 2/40

Dimensions:
page 2/41

Schemes:
page 2/41

2/35

Electronic pressure sensors

References,
characteristics

OsiSense XM, type XMLE

Vacuum and pressure switches without display (1), with


adjustable differential for regulation between 2 thresholds
Sizes - 1 to 25 bar (- 14.5 to 362.5 psi)

Type

With solid-state output, fluid connection G 1/4 A (male)

1
2
3
4

Adjustable range of switching point (PH)


(Rising pressure) (2)
Electrical connector type

- 0.07- 1 bar (- 1.015- 14.5 psi)

0.071 bar (101514.5 psi)

DIN 43650 A

DIN 43650 A

M12

M12

References
Fluids controlled (3)

Type of output

Hydraulic oils, fresh water, sea water, air,


corrosive fluids, from- 15 to + 80C

NPN

XMLEM01U1C31

XMLEM01U1D31

XMLE001U1C31

XMLE001U1D31

PNP

XMLEM01U1C41

XMLEM01U1D41

XMLE001U1C41

XMLE001U1D41

Weight (kg)

0.250

0.300

0.250

0.300

Complementary characteristics not shown under general characteristics (page 2/31)


Possible differential

5
6

Min. at low setting


Min. at high setting
Max. at high setting

Maximum permissible accidental pressure


Destruction pressure
Rated supply voltage
Voltage limits
Output
Switching capacity
Current consumption
Electrical connection

0.02 bar (0.29 psi)


0.02 bar (0.29 psi)
0.02 bar (0.29 psi)
0.02 bar (0.29 psi)
0.95 bar (13.77 psi) (max. differential at low
0.95 bar (13.77 psi)
setting)
1 bar (14.5 psi)
2 bar (29 psi)
2 bar (29 psi)
3 bar (43.5 psi)
c 24 V
c 1133 V
Solid-state, NPN or PNP, NC
100 mA
< 15 mA
XMLEpppU1Cp1: DIN 43650 A, 4-pin male connector. For suitable female connector,
see page 2/40.
XMLEpppU1Dp1: M12, 4-pin male connector. For suitable female connector, see
page 2/40.
(1) Optional digital display for pressure switch, see page 2/40.
(2) For vacuum switches (size - 1 bar): adjustable range of switching point (PB) on falling pressure.
(3) Component materials of units in contact with the fluid, see page 2/31.

Operating curves

bar
Falling pressure

Falling pressure

bar
0
-0.07
-0.2
-0.4

-0.6

1
0.8
0.6

0.4
-0.8

0.2
-1
0
-0.2
-0.05

10

-0.4

-0.6

-0.8
bar
-0.98
Rising pressure

0.07
0

0
0.2
0.05

0.4

0.6
0.8
bar
0.98
Rising pressure

1 Maximum differential
2 Minimum differential
Other versions

Accessories:
page 2/40

2/36

Pressure and vacuum switches with 1/4" NPTF fluid connection. Please consult our Customer
Care Centre.

Dimensions:
page 2/41

Schemes:
page 2/41

With solid-state output, fluid connection G 1/4 A (male)

1
2
0.710 bar (10.15145 psi)

1.7525 bar (25.38362.5 psi)

DIN 43650 A

M12

DIN 43650 A

M12

References

XMLE010U1C31

XMLE010U1D31

XMLE025U1C31

XMLE025U1D31

XMLE010U1C41

XMLE010U1D41

XMLE025U1C41

XMLE025U1D41

0.250

0.300

0.250

0.300

Complementary characteristics not shown under general characteristics (page 2/31)


0.2 bar (2.9 psi)
0.2 bar (2.9 psi)
0.2 bar (2.9 psi)
0.2 bar (2.9 psi)
9.5 bar (137.7 psi)
23.75 bar (344.37 psi)
20 bar (290 psi)
50 bar (725 psi)
30 bar (435 psi)
75 bar (1087.5 psi)
c 24 V
c 1133 V
Solid-state, NPN or PNP, NC
100 mA
< 15 mA
XMLEpppU1Cp1: DIN 43650 A, 4-pin male connector. For suitable female connector, see page 2/40.
XMLEpppU1Dp1: M12, 5-pin male connector. For suitable female connector, see page 2/40.

5
6
7

bar

bar

10

25

Rising pressure

Rising pressure

Operating curves

8
6

2
10

0
0.5

15

0.7
0

20

9.8
Falling pressure

bar

1.75
0

9
0
1.25

10

15
20
bar
24.5
Falling pressure

1 Maximum differential
2 Minimum differential

Accessories:
page 2/40

10
Dimensions:
page 2/41

Schemes:
page 2/41

2/37

References,
characteristics (continued)

Type

Electronic pressure sensors


OsiSense XM, type XMLE

Pressure switches without display (1), with adjustable differential


for regulation between 2 thresholds
Sizes 60 to 600 bar (870 to 8700 psi)
With solid-state output, fluid connection G 1/4 A (male)

1
2
3

Adjustable range of switching point (PH)


(Rising pressure)

4.260 bar (60.9870 psi)

7100 bar (101.51450 psi)

Electrical connector type

DIN 43650 A

DIN 43650 A

M12

M12

References

Fluids controlled (2)

Type of output

Hydraulic oils, fresh water, sea water, air,


corrosive fluids, from- 15 to + 80C

NPN

XMLE060U1C31

XMLE060U1D31

XMLE100U1C31

XMLE100U1D31

PNP

XMLE060U1C41

XMLE060U1D41

XMLE100U1C41

XMLE100U1D41

Weight (kg)

0.270

0.320

0.270

0.320

Complementary characteristics not shown under general characteristics (page 2/31)

5
6

Possible differential

Min. at low setting


Min. at high setting
Max. at high setting
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Output
Switching capacity
Current consumption
Electrical connection

1.2 bar (17.4 psi)


2 bar (29 psi)
1.2 bar (17.4 psi)
2 bar (29 psi)
57 bar (826.5 psi)
95 bar (1377.5 psi)
120 bar (1740 psi)
200 bar (2900 psi)
180 bar (2610 psi)
300 bar (4350 psi)
c 24 V
c 1133 V
Solid-state, NPN or PNP, NC
100 mA
< 15 mA
XMLEpppU1Cp1: DIN 43650 A, 4-pin male connector. For suitable female connector,
see page 2/40.
XMLEpppU1Dp1: M12, 5-pin male connector. For suitable female connector, see
page 2/40.
(1) Optional digital display for pressure switch, see page 2/40.
(2) Component materials of units in contact with the fluid, see page 2/41.

Operating curves
bar

Rising pressure

Rising pressure

bar
60

100

50
40

30

9
10

60

10

20

30

40

2/38

50

58.8
Falling pressure

1 Maximum differential
2 Minimum differential

Accessories:
page 2/40

20

10

Other versions

40

20

4.2
0

80

bar

7
0

20

40

60
80
bar
98
Falling pressure

Pressure and vacuum switches with 1/4" NPTF fluid connection. Please consult our Customer
Care Centre.
Dimensions:
page 2/41

Schemes:
page 2/41

With solid-state output, fluid connection G 1/4 A (male)

1
2
17.5250 bar (253.73625 psi)

42600 bar (6098700 psi)

DIN 43650 A

DIN 43650 A

M12

M12

References
XMLE250U1C31

XMLE250U1D31

XMLE600U1C31

XMLE600U1D31

XMLE250U1C41

XMLE250U1D41

XMLE600U1C41

XMLE600U1D41

0.270

0.320

0.270

0.320

Complementary characteristics not shown under general characteristics (page 2/31)


5 bar (72.5 psi)
12 bar (174 psi)
5 bar (72.5 psi)
12 bar (174 psi)
237.5 bar (3443.7 psi)
570 bar (8265 psi)
500 bar (7250 psi)
1200 bar (17,400 psi)
750 bar (10,875 psi)
1800 bar (26,100 psi)
c 24 V
c 1133 V
Solid-state, NPN or PNP, NC
100 mA
< 15 mA
XMLEpppU1Cp1: DIN 43650 A, 4-pin male connector. For suitable female connector, see page 2/40.
XMLEpppU1Dp1: M12, 5-pin male connector. For suitable female connector, see page 2/40.

5
6
7

Operating curves
bar
Rising pressure

Rising pressure

bar
250
200
150

600
500
400

300

100

200
50

100

17.5
0
0
50
12.5

100

150

200

245
Falling pressure

bar

42
0

0
100
30

200

300

400

500

Falling pressure

588

bar

10

1 Maximum differential
2 Minimum differential

Accessories:
page 2/40

Dimensions:
page 2/41

Schemes:
page 2/41

2/39

References

Electronic pressure sensors


OsiSense XM, type XMLE
Accessories

Accessories
Description

Digital displays for analogue


pressure sensors

2
XML EZpppp

3
4
XZ CC43FCP40B

Description

Pre-wired M12, straight, female


connectors
XZ CP1164Lp

Pre-wired M12, elbowed, female


connectors

7
XZ CP1264Lp

8
9
10

2/40

Reference
XML EZM01

Weight
kg
0.100

01

XML EZ001

0.100

010

XML EZ010

0.100

025

XML EZ025

0.100

060

XML EZ060

0.100

0100

XML EZ100

0.100

0250

XML EZ250

0.100

0600

XML EZ600

0.100

Length of cable
m

Reference
XZ CC43FCP40B

2m

XZ CP1164L2

0.115

5m

XZ CP1164L5

0.270

10 m

XZ CP1164L10

0.520

2m

XZ CP1264L2

0.115

5m

XZ CP1264L5

0.270

10 m

XZ CP1264L10

0.520

Connection accessories
Female DIN 43650 A connector

Sensor size
bar
- 10

Weight
kg
0.035

Electronic pressure sensors

Dimensions,
schemes

OsiSense XM, type XMLE

Dimensions
XMLEpppU1C21, XMLU1C31

XMLEpppU1D31

42

40

40

26

50

12 10
XML E
M01, 001, 010, 025
060, 250, 600
: G 1/4 A (male)

12 10

36

a
65
75

XMLE
M01, 001, 010, 025
060, 250, 600
: G 1/4 A (male)

a
a
65
75

Digital displays
XMLEZppp

50

36

a + 22 (1)

66

5
6

40

51,5

(1) a = 65 or 75, see above.

Wiring schemes

Pressure transmitters (1)

XMLEpppU1C21

2
3
1

3/BU
4

Electronic pressure switches (2)

XMLEpppU1D21

XMLEpppU1C31

2
YG

1/BN

3/BU

XMLEpppU1D31

YG

2/WH
1/BN

(1) Sensor connector pin view

3/BU

3
1

XMLEpppU1D41

XMLEpppU1C41

4
2/WH
YG

1/BN

10

(2) Switch connector pin view

2/41

Electronic pressure sensors

Presentation

OsiSense XM

For control circuits, type XMLF

Presentation

Electronic pressure sensors type XMLF are used for pressure control of hydraulic
oils, fresh water, sea water, air and corrosive fluids, between 1 and 600 bar.
b Simplicity of setting-up
Electronic pressure sensors type XMLF are characterised by their ceramic pressure
measuring cell.

2
3

Output 1

Bar

Output 2

Psi

Menu

1
6
2
3
4

Enter

1 Large 4-digit display indicating programming codes, parameter values or the


measured pressure.
2 LED indicators for pressure unit of measurement selected (direct reading of bar
or psi).
3 LED indicator(s) for providing status of pressure switch output(s).
4 Ergonomic keys for configuring the product via the pull-down menu.
5 Excellent resistance to overpressures.
6 Memorisation and possibility of reading pressure peaks within the installation.
v Three menus enable the user to:
- configure ("PROG" menu) the various functions of the unit (access to all the
parameters of the product),
- perform ("USER" menu) diagnostic operations and, for pressure switches, to set
the switching point pressure values,
- read ("READ" menu) all the configuration details, together with the values set in
the "PROG" and "USER" menus.

Functions
b Pressure transmitters XMLFpppD2p1p have a 420 mA or 010 V analogue
output. In addition to having a manual diagnostic function (see below), they also
incorporate a remote diagnostic function: a digital input connected, for example,
to a PLC enables remote activation of the sensors test function. When the sensor
is operating correctly, the analogue output must, when testing, be close to 50%
of the sensor size (12 mA or 5 V).
b Universal sensors XMLFpppD2p2p are pressure switches with an adjustable
differential, for regulation between 2 thresholds, featuring a solid-state output
(configurable both for NPN or PNP and NO or NC), and a 420 mA or 010 V
analogue output. They incorporate the manual diagnostic function (see below).
b Pressure switches XMLFpppD2p3p are dual stage switches, with adjustable
differential for each threshold, featuring 2 solid-state outputs (configurable both
for NPN or PNP and NO or NC). They incorporate the manual diagnostic function
(see below).
b Pressure switches XMLFpppE2p4p for AC control are switches with adjustable
differential, for regulation between 2 thresholds, featuring an a2.5A relay output
(configurable for NO or NC). They incorporate the manual diagnostic function (see
below).

5
6
7

Sensors type XMLF feature:


b Various configurable functions
v For the display:
- pressure unit of measurement (bar or psi),
- response time (slow: display refreshes in 1% steps of the units size, normal:
display refreshes in 0.5% steps of the units size or fast: display refreshes every 10 ms).
v For the analogue output:
- response time (adjustable from 5 to 500 ms, in steps of 1 ms),
- maximum pressure of the output curve (adjustable from 75 to 125% of the units
size).
v For each solid-state output:
- PNP or NPN logic,
- NO or NC output,
- time delay both on trip and on reset (adjustable from 0 to 50 s, in steps of 1 s),
- response time (adjustable from 5 to 500 ms, in steps of 1 ms).
v For the AC relay output models:
- NO or NC contact,
- time delay both on trip and on reset (adjustable from 0 to 50 s, in steps of 1 s),
- response time (adjustable from 5 to 500 ms, in steps of 1 ms).
b Manual diagnostic function enabling:
- checking correct operation of sensor,
- reading the value of the maximum pressure peak that has occurred since the last
reset to zero and also, deleting this value for a fresh reset.

8
9
10

2/42

Electronic pressure sensors

Characteristics

OsiSense XM

For control circuits, type XMLF

Environment characteristics
Conformity to standards

e,
IEC/EN 60947-1,
IEC/EN 60947-5-1,
EN 50081, EN 50082, EN 61000-6-2, EN 61000-4-2/3/4/5/6/8/11

Product certifications
Protective treatment

UL, CSA
Standard version "TC"

Ambient air temperature

Fluids or products controlled


Component materials in contact with fluid

- 25+ 80C (DC models)


- 25+ 75C (AC models)
Hydraulic oils, air, fresh water, sea water, corrosive fluids from - 15+ 80C
Stainless steel fluid entry type AISI303, viton gasket

Operating position
Vibration resistance

All positions
5 gn (25200 Hz) and 35 gn (602000 Hz), conforming to IEC 68-2-6

Shock resistance
Electrical protection

50 gn, conforming to IEC 68-2-27


Protected against reverse polarity, short-circuit, overload and connection faults

Resistance to electromagnetic
interference

For operation

Electrostatic discharges
Radiated electromagnetic
fields
Fast transients
Surges
Conducted disturbances,
induced by radio frequency
fields

Standard EN 61000-4-2
Standard EN 61000-4-3

contact 4kV, air 8 kV


10 V/m

Standard EN 61000-4-4
Standard EN 61000-4-5
Standard EN 61000-4-6

2 kV
(AC) 1 kV, (DC) 0.5 kV
10 V

Degree of protection

IP 67 conforming to IEC/EN 60529, NEMA 4/6/12/13

Operating rate
Output response time

< 50 Hz
Adjustable from 5 to 500 ms, in steps of 1 ms

Service life
Drift

Precision
Repeat accuracy
Display response time

In millions of operating
cycles
Of the zero point

> 10

Of the sensitivity

< 0.03% of the measuring range/C

Analogue output
Solid-state output

y 0.6% of the measuring range, output offset < 200 mV


y 0.6% of the measuring range
y 0.5 % of the measuring range
Adjustable; 3 options:
- slow (1% of the units size),
- normal (0.5% of the units size), or
- fast (refreshed every 10 ms)

1
2
3
4
5

< 0.1% of the measuring range/C

Fluid connection

G 1/4 (BSP female) conforming to NF E 03-004 and ISO 7 or 1/4" NPT female, depending
onmodel

Electrical connection

M12 or SAE 7/8"-16UN connector, depending on model

6
7
8
9
10

2/43

Electronic pressure sensors

References,
characteristics

OsiSense XM, type XMLF


Size - 1 bar (- 14.5 psi)

Type

Pressure transmitters

Universal sensors with adjustable


differential. Solid-state and analogue
outputs (1)

- 0.08- 1 bar (- 1.16- 14.5 psi)

1
2
3

Adjustable range of switching point (PB)


(Fallingpressure)
Analogue output

4-20 mA

0-10 V

4-20 mA

0-10 V

References
Fluid connection
(2) (3)

Weight (kg)

Min. at low and high setting


Max. at low setting
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay

Electrical connection

Curves

Analogue output curve

3 bar (43.5 psi)


5 bar (72.5 psi)
c 24 V
c 1733 V
80 mA

XMLFM01D2125
XMLFM01D2126

0.03 bar (0.44 psi)


0.95 bar (13.77 psi)

Programmable, NPN or PNP and NO or NC


Adjustable time delay on trip and on reset from
0 to 50 s, in steps of 1 second

200 mA
420 mA or 010 V, depending on model. Maximum signal level adjustable between - 0.25
and 0.25bar (- 3.62 and 3.62 psi)
M12, 4-pin male connector. For suitable female connectors, including pre-wired versions,
see page 2/70
(1) Vacuum sensors with adjustable differential for regulation between 2 thresholds. Solid-state
and analogue outputs.
(2) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(3) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Vacuum switch operating curves


Rising pressure
bar
-0.97
-0.5

XMLFM01D2025
XMLFM01D2026

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
(add to PB to give PH)

Switching capacity
Analogue output

XMLFM01D2115
XMLFM01D2116

20 mA - 10 V

-0.05 0
-0.08
Time

2
12 mA - 5 V

9
4 mA - 0 V

-1

- 0.50

- 0.25

Accessories:
page 2/70

2/44

Dimensions:
page 2/71

-0.5

-1
bar

0.25 bar

1 Maximum differential
2 Minimum differential

10

Schemes:
page 2/71

Falling pressure

XMLFM01D2015
XMLFM01D2016
0.480

G 1/4 female
1/4" NPT female

PH

PB
Vacuum

Adjustable value

References,
characteristics (continued)

Type

Electronic pressure sensors


OsiSense XM, type XMLF
Size - 1 bar (- 14.5 psi)

Vacuum switches with adjustable


differential and relay output (1)

Dual stage adjustable vacuum


switches with solid-state outputs (2)

1
2

Adjustable range of switching point(s) (PB or PB1 and PB2)


(Falling pressure)

- 0.08- 1 bar (- 1.16- 14.5 psi)

References

Fluid connection
(3) (4)

G 1/4 female
1/4" NPT female

Weight (kg)

XMLFM01E2045
XMLFM01E2046
0.590

XMLFM01D2035
XMLFM01D2036
0.480

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential (add to:


Min. at low and high setting
-PBtogive PH
Max. at low setting
- PB1 & PB2 to givePH1& PH2)
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Electrical connection

Vacuum switch operating curves

(Curve for each stage for dual stage vacuum switches)


Rising pressure
bar
-0.97
-0.5

0.03 bar (0.44 psi)


0.95 bar (13.77 psi)

For each stage:


min. at low and high setting: 0.03 bar (0.44 psi)
max. at low setting: 0.95 bar (13.77 psi)

3 bar (43.5 psi)


5 bar (72.5 psi)
a 120 V
c 24 V
a 102132 V
c 1733 V
32 mA
80 mA
Relay
Programmable, NPN or PNP and NO or NC
Adjustable time delay on trip and on reset from 0 to 50 s, in steps of 1 second
2.5 A, AC-15, C300 (120 V - 1.5 A)
200 mA
SAE 7/8-16UN, 5-pin male connector.
M12, 4-pin male connector. For suitable
For suitable female pre-wired connectors,
female connectors, including pre-wired
see page 2/70.
versions, see page. 2/71
(1) Vacuum switches with adjustable differential for regulation between 2 thresholds. Relay output.
(2) Vacuum switches with 2 adjustable stages and adjustable differential for each threshold.
Solid-state outputs.
(3) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(4) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Vacuum switches with relay output

Dual stage vacuum switches

4
5
6
7

-0.05 0
-0.08
Time

-0.5

-1
bar

Falling pressure

Time

1 Maximum differential
2 Minimum differential

PH

PH1
PB1

PB

PH2
PB2

Vacuum

Vacuum

Adjustable value

Adjustable value

9
10

Accessories:
page 2/70

Dimensions:
page 2/71

Schemes:
page 2/71

2/45

Electronic pressure sensors

References,
characteristics

OsiSense XM, type XMLF


Size 1 bar (14.5 psi)

Type

Pressure transmitters

Universal sensors with adjustable


differential. Solid-state and analogue
outputs (1)

0.081 bar (1.1614.5 psi)

1
2
3

Adjustable range of switching point (PH)


(Rising pressure)
Analogue output

4-20 mA

0-10 V

4-20 mA

0-10 V

References
Fluid connection
(2) (3)

4
5

XMLF001D2015
XMLF001D2016
0.480

G 1/4 female
1/4" NPT female

Weight (kg)

Min. at low and high setting


Max. at high setting
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay

Electrical connection

Curves

Analogue output curve

4 bar (58 psi)


6 bar (87 psi)
c 24 V
c 1733 V
80 mA

XMLF001D2125
XMLF001D2126

0.03 bar (0.44 psi)


0.95 bar (13.77 psi)

Programmable, NPN or PNP and NO or NC


Adjustable time delay on trip and on reset from
0 to 50 s, in steps of 1 second

200 mA
420 mA or 010 V, depending on model. Maximum signal level adjustable between 0.75 and
1.25 bar (10.88 and 18.12 psi)
M12, 4-pin male connector. For suitable female connectors, including pre-wired versions,
see page 2/70
(1) Pressure sensors with adjustable differential for regulation between 2 thresholds. Solid-state
and analogue outputs.
(2) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(3) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure sensor operating curves

Rising pressure

XMLF001D2025
XMLF001D2026

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
(subtract fromPH togivePB)

Switching capacity
Analogue output

XMLF001D2115
XMLF001D2116

20 mA - 10 V

bar
1
Pressure

PH

0.5

12 mA - 5 V

PB

0.08
4 mA - 0 V

0.5

0.75

1.25 bar

0 0.05

0.5

1 Maximum differential
2 Minimum differential

10
Accessories:
page 2/70

2/46

Dimensions:
page 2/71

Schemes:
page 2/71

Time

0.97bar
Falling pressure

Adjustable value

References,
characteristics (continued)

Type

Electronic pressure sensors


OsiSense XM, type XMLF
Size 1 bar (14.5 psi)

Pressure switches with adjustable


differential and relay output (1)

Dual stage adjustable pressure


switches with solid-state outputs (2)

1
2

Adjustable range of switching point(s) (PH or PH1 and PH2)


(Risingpressure)

0.081 bar (1.1614.5 psi)

References
Fluid connection
(3) (4)

G 1/4 female
1/4" NPT female

Weight (kg)

XMLF001E2045
XMLF001E2046
0.590

XMLF001D2035
XMLF001D2036
0.480

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
Min. at low and high setting
(subtractfrom:
Max. at high setting
-PHtogivePB
-PH1&PH2to give PB1 & PB2)
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Electrical connection

Pressure switch operating curves

Rising pressure

(Curve for each stage for dual stage pressure switches)

0.03 bar (0.44 psi)


0.95 bar (13.77 psi)

For each stage:


min. at low and high setting: 0.03 bar (0.44 psi)
max. at high setting: 0.95 bar (13.77 psi)

4 bar (58 psi)


6 bar (87 psi)
a 120 V
c 24 V
a 102132 V
c 1733 V
32 mA
80 mA
Relay
Programmable, NPN or PNP and NO or NC
Adjustable time delay on trip and on reset from 0 to 50 s, in steps of 1 second
2.5 A, AC-15, C300 (120 V - 1.5 A)
200 mA
SAE 7/8-16UN, 5-pin male connector.
M12, 4-pin male connector. For suitable
For suitable female pre-wired connectors,
female connectors, including pre-wired
see page 2/70.
versions, see page 2/70
(1) Pressure switches with adjustable differential for regulation between 2 thresholds. Relay output.
(2) Pressure switches with 2 adjustable stages and adjustable differential for each threshold.
Solid-state outputs.
(3) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(4) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure switches with relay output

4
5
6
7

Dual stage pressure switches

bar
1

Pressure

Pressure

PH

PH2

PB2

0.5

PH1
PB1

PB

0.08
0 0.05

0.5

1 Maximum differential
2 Minimum differential

Adjustable value

Time

Time

0.97bar
Falling pressure

Adjustable value

10
Accessories:
page 2/70

Dimensions:
page 2/71

Schemes:
page 2/71

2/47

Electronic pressure sensors

References,
characteristics

OsiSense XM, type XMLF


Size 2.5 bar (36.25 psi)

Type

Pressure transmitters

Universal sensors with adjustable


differential. Solid-state and analogue
outputs (1)

0.202.5 bar (2.936.25 psi)

1
2
3

Adjustable range of switching point (PH)


(Rising pressure)
Analogue output

4-20 mA

0-10 V

4-20 mA

0-10 V

References
Fluid connection
(2) (3)

4
5

XMLF002D2015
XMLF002D2016
0.480

G 1/4 female
1/4" NPT female

Weight (kg)

XMLF002D2025
XMLF002D2026

XMLF002D2125
XMLF002D2126

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
(subtract from PH togivePB)

Min. at low and high setting


Max. at high setting
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Analogue output

XMLF002D2115
XMLF002D2116

Electrical connection

10 bar (145 psi)


15 bar (217.5 psi)
c 24 V
c 1733 V
80 mA

0.08 bar (1.09 psi)


2.38 bar (34.51 psi)

Programmable, NPN or PNP and NO or NC


Adjustable time delay on trip and on reset from
0 to 50 s, in steps of 1 second

200 mA
420 mA or 010 V, depending on model. Maximum signal level adjustable between 1.9 and
3.1 bar (27.5 and 44.9 psi)
M12, 4-pin male connector. For suitable female connectors, including pre-wired versions,
see page 2/70

(1) Pressure sensors with adjustable differential for regulation between 2 thresholds. Solid-state
and analogue outputs.
(2) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(3) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Curves

Analogue output curve

Pressure sensor operating curves


Rising pressure

20 mA - 10 V

bar
2.5
Pressure

PH

12 mA - 5 V
1

PB

0.20

4 mA - 0 V

1.9

2.5

3.1 bar

0 0.12

1 Maximum differential
2 Minimum differential

10
Accessories:
page 2/70

2/48

Dimensions:
page 2/71

Schemes:
page 2/71

Time

2 2.42 bar
Falling pressure

Adjustable value

References,
characteristics (continued)

Type

Electronic pressure sensors


OsiSense XM, type XMLF
Size 2.5 bar (36.25 psi)

Pressure switches with adjustable


differential and relay output (1)

Dual stage adjustable pressure


switches with solid-state outputs (2)

1
2

Adjustable range of switching point(s) (PH or PH1 and PH2)


(Risingpressure)

0.202.5 bar (2.936.25 psi)

References
Fluid connection
(3) (4)

G 1/4 female
1/4" NPT female

Weight (kg)

XMLF002E2045
XMLF002E2046
0.590

XMLF002D2035
XMLF002D2036
0.480

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
Min. at low and high setting
(subtractfrom:
Max. at high setting
-PHtogivePB
-PH1&PH2to give PB1 & PB2)
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Electrical connection

0.08 bar (1.09 psi)


2.38 bar (34.51 psi)

For each stage:


min. at low and high setting: 0.08 bar (1.09 psi)
max. at high setting: 2.38 bar (34.51 psi)

10 bar (145 psi)


15 bar (217.5 psi)
a 120 V
c 24 V
a 102132 V
c 1733 V
32 mA
80 mA
Relay
Programmable, NPN or PNP and NO or NC
Adjustable time delay on trip and on reset from 0 to 50 s, in steps of 1 second
2.5 A, AC-15, C300 (120 V - 1.5 A)
200 mA
M12, 4-pin male connector. For suitable
SAE 7/8-16UN, 5-pin male connector.
female connectors, including pre-wired
For suitable female pre-wired connectors,
versions, see page 2/70
see page 2/70.
(1) Pressure switches with adjustable differential for regulation between 2 thresholds. Relay output.
(2) Pressure switches with 2 adjustable stages and adjustable differential for each threshold.
Solid-state outputs.
(3) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(4) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

5
6
7

Pressure switch operating curves (Curve for each stage for dual stage pressure switches)
Pressure switches with relay output

Dual stage pressure switches

Rising pressure

bar
2.5
2

Pressure

Pressure

PH

PH2

PB2

PH1
PB1

PB

0.20
0 0.12

Time

2 2.42 bar
Falling pressure

1 Maximum differential
2 Minimum differential

Adjustable value

Time

Adjustable value

10
Accessories:
page 2/70

Dimensions:
page 2/71

Schemes:
page 2/71

2/49

Electronic pressure sensors

References,
characteristics

OsiSense XM, type XMLF


Size 10 bar (145 psi)

Type

Pressure transmitters

Universal sensors with adjustable


differential. Solid-state and analogue
outputs (1)

0.810 bar (11.6145 psi)

1
2
3

Adjustable range of switching point (PH)


(Rising pressure)
Analogue output

4-20 mA

G 1/4 female
1/4" NPT female

Weight (kg)

XMLF010D2015
XMLF010D2016
0.480

Min. at low and high setting


Max. at high setting
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay

XMLF010D2115
XMLF010D2116

Electrical connection

Curves

Analogue output curve

40 bar (580 psi)


60 bar (870 psi)
c 24 V
c 1733 V
80 mA

XMLF010D2025
XMLF010D2026

XMLF010D2125
XMLF010D2126

0.3 bar (4.4 psi)


9.5 bar (137.75 psi)

Programmable, NPN or PNP and NO or NC


Adjustable time delay on trip and on reset from
0 to 50 s, in steps of 1 second

200 mA
420 mA or 010 V, depending on model. Maximum signal level adjustable between 7.5 and
12.5 bar (108.75 and 181.25 psi)
M12, 4-pin male connector. For suitable female connectors, including pre-wired versions,
see page 2/70
(1) Pressure sensors with adjustable differential for regulation between 2 thresholds. Solid-state
and analogue outputs.
(2) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(3) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure sensor operating curves


bar
10

Rising pressure

0-10 V

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
(subtract from PH togivePB)

Switching capacity
Analogue output

4-20 mA

References
Fluid connection
(2) (3)

0-10 V

20 mA - 10 V

Pressure

PH

1
5

12 mA - 5 V

PB

0.8
4 mA - 0 V

7.5

10

12.5 bar

0 0.5

1 Maximum differential
2 Minimum differential

10
Accessories:
page 2/70

2/50

Dimensions:
page 2/71

Schemes:
page 2/71

Time

9.7 bar
Falling pressure

Adjustable value

References,
characteristics (continued)

Type

Electronic pressure sensors


OsiSense XM, type XMLF
Size 10 bar (145 psi)

Pressure switches with adjustable


differential and relay output (1)

Dual stage adjustable pressure


switches with solid-state outputs (2)

1
2

Adjustable range of switching point(s) (PH or PH1 and PH2)


(Risingpressure)

0.810 bar (11.6145 psi)

References
Fluid connection
(3) (4)

G 1/4 female
1/4" NPT female

Weight (kg)

XMLF010E2045
XMLF010E2046
0.590

XMLF010D2035
XMLF010D2036
0.480

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
Min. at low and high setting
(subtractfrom:
Max. at high setting
-PHtogivePB
-PH1&PH2to give PB1 & PB2)
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Electrical connection

Pressure switch operating curves

(Curve for each stage for dual stage pressure switches)

0.3 bar (4.4 psi)


9.5 bar (137.75 psi)

For each stage:


min. at low and high setting: 0.3 bar (4.4 psi)
max. at high setting: 9.5 bar (137.75 psi)

40 bar (580 psi)


60 bar (870 psi)
a 120 V
c 24 V
a 102132 V
c 1733 V
32 mA
80 mA
Relay
Programmable, NPN or PNP and NO or NC
Adjustable time delay on trip and on reset from 0 to 50 s, in steps of 1 second
2.5 A, AC-15, C300 (120 V - 1.5 A)
200 mA
SAE 7/8-16UN, 5-pin male connector.
M12, 4-pin male connector. For suitable
For suitable female pre-wired connectors,
female connectors, including pre-wired
see page 2/70.
versions, see page 2/70
(1) Pressure switches with adjustable differential for regulation between 2 thresholds. Relay output.
(2) Pressure switches with 2 adjustable stages and adjustable differential for each threshold.
Solid-state outputs.
(3) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(4) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure switches with relay output

4
5
6
7

Dual stage pressure switches

Rising pressure

bar
10

Pressure

Pressure

PH

PH2

PB

PH1
PB1

PB2

0.8
0 0.5

Time

9.7 bar
Falling pressure

1 Maximum differential
2 Minimum differential

Adjustable value

Time

Adjustable value

10
Accessories:
page 2/70

Dimensions:
page 2/71

Schemes:
page 2/71

2/51

Electronic pressure sensors

References,
characteristics

OsiSense XM, type XMLF


Size 16 bar (232 psi)

Type

Pressure transmitters

Universal sensors with adjustable


differential. Solid-state and analogue
outputs (1)

1.2816 bar (18.56232 psi)

1
2
3

Adjustable range of switching point (PH)


(Rising pressure)
Analogue output

5
6
7

0-10 V

4-20 mA

0-10 V

References
Fluid connection
(2)

4-20 mA

XMLF016D2015
XMLF016D2016
XMLF016D2019
0.480

G 1/4 female
1/4" NPT female
SAE 7/16-20UNF

Weight (kg)

XMLF016D2115
XMLF016D2116
XMLF016D2119

XMLF016D2025
XMLF016D2026
XMLF016D2029

XMLF016D2125
XMLF016D2126
XMLF016D2129

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
(subtract from PH togivePB)

Min. at low and high setting


Max. at high setting
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Analogue output
Electrical connection

Curves

Analogue output curve

64 bar (928 psi)


96 bar (1392 psi)
c 24 V
c 1733 V
80 mA

0.48 bar (6.96 psi)


15.2 bar (220.4 psi)

Programmable, NPN or PNP and NO or NC


Adjustable time delay on trip and on reset from
0 to 50 s, in steps of 1 second

200 mA
420 mA or 010 V, depending on model. Maximum signal level adjustable between 12 and
20 bar (174 and 290 psi)
M12, 4-pin male connector. For suitable female connectors, including pre-wired versions,
see page 2/70
(1) Pressure sensors with adjustable differential for regulation between 2 thresholds. Solid-state
and analogue outputs.
(2) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.

Pressure sensor operating curves


bar
16

Rising pressure

20 mA - 10 V

Pressure

10

PH

12 mA - 5 V

PB

4 mA - 0 V

1.28

10 12

16

20 bar

0 0.8

1 Maximum differential
2 Minimum differential

10
Accessories:
page 2/70

2/52

Dimensions:
page 2/71

Schemes:
page 2/71

Time

10
15.5 bar
Falling pressure

Adjustable value

References,
characteristics (continued)

Type

Electronic pressure sensors


OsiSense XM, type XMLF
Size 16 bar (232 psi)

Pressure switches with adjustable


differential and relay output (1)

Dual stage adjustable pressure


switches with solid-state outputs (2)

1
2

Adjustable range of switching point(s) (PH or PH1 and PH2)


(Risingpressure)

1.2816 bar (18.56232 psi)

References
Fluid connection
(3)

G 1/4 female
1/4" NPT female
SAE 7/16-20UNF

Weight (kg)

XMLF016E2045
XMLF016E2046
XMLF016E2049
0.590

XMLF016D2035
XMLF016D2036
XMLF016D2039
0.480

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
Min. at low and high setting
(subtractfrom:
Max. at high setting
-PHtogivePB
-PH1&PH2to give PB1 & PB2)
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Electrical connection

Pressure switch operating curves

Rising pressure

(Curve for each stage for dual stage pressure switches)

0.48 bar (6.96 psi)


15.2 bar (220.4 psi)

For each stage:


min. at low and high setting: 0.48 bar (6.96 psi)
max. at high setting: 15.2 bar (220.4 psi)

64 bar (928 psi)


96 bar (1392 psi)
a 120 V
c 24 V
a 102132 V
c 1733 V
32 mA
80 mA
Relay
Programmable, NPN or PNP and NO or NC
Adjustable time delay on trip and on reset from 0 to 50 s, in steps of 1 second
2.5 A, AC-15, C300 (120 V - 1.5 A)
200 mA
M12, 4-pin male connector. For suitable
SAE 7/8-16UN, 5-pin male connector.
female connectors, including pre-wired
For suitable female pre-wired connectors,
versions, see page 2/70
see page 2/70.
(1) Pressure switches with adjustable differential for regulation between 2 thresholds. Relay output.
(2) Pressure switches with 2 adjustable stages and adjustable differential for each threshold.
Solid-state outputs.
(3) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.

4
5
6
7

Pressure switches with relay output

Dual stage pressure switches

bar
16

10

Pressure

Pressure

PH

PH2

PB

PH1
PB1

PB2

1.28
0 0.8

1 Maximum differential
2 Minimum differential

Time

Time

10
15.5 bar
Falling pressure

Adjustable value

Adjustable value

10
Accessories:
page 2/70

Dimensions:
page 2/71

Schemes:
page 2/71

2/53

Electronic pressure sensors

References,
characteristics

OsiSense XM, type XMLF


Size 25 bar (362.5 psi)

Type

Pressure transmitters

Universal sensors with adjustable


differential. Solid-state and analogue
outputs (1)

225 bar (29362.5 psi)

1
2
3

Adjustable range of switching point (PH)


(Rising pressure)
Analogue output

4-20 mA

XMLF025D2015
XMLF025D2016
0.480

G 1/4 female
1/4" NPT female

Weight (kg)

0-10 V

XMLF025D2115
XMLF025D2116

XMLF025D2025
XMLF025D2026

XMLF025D2125
XMLF025D2126

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
(subtract from PH togivePB)

Min. at low and high setting


Max. at high setting
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Analogue output

4-20 mA

References
Fluid connection
(2) (3)

0-10 V

Electrical connection

Curves

Analogue output curve

100 bar (1450 psi)


150 bar (2175 psi)
c 24 V
c 1733 V
80 mA

0.75 bar (10.9 psi)


23.8 bar (345.1 psi)

Programmable, NPN or PNP and NO or NC


Adjustable time delay on trip and on reset from
0 to 50 s, in steps of 1 second

200 mA
420 mA or 010 V, depending on model. Maximum signal level adjustable between 18.8 and
31.2 bar (272.6 and 452.4 psi)
M12, 4-pin male connector. For suitable female connectors, including pre-wired versions,
see page 2/70
(1) Pressure sensors with adjustable differential for regulation between 2 thresholds. Solid-state
and analogue outputs.
(2) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(3) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure sensor operating curves


Rising pressure

20 mA - 10 V

bar
25
Pressure

20

PH

12 mA - 5 V
10

PB

4 mA - 0 V

10

18.8

25

31.2 bar

0 1.2

10

1 Maximum differential
2 Minimum differential

10
Accessories:
page 2/70

2/54

Dimensions:
page 2/71

Schemes:
page 2/71

Time

20 24.2 bar
Falling pressure

Adjustable value

References,
characteristics (continued)

Type

Electronic pressure sensors


OsiSense XM, type XMLF
Size 25 bar (362.5 psi)

Pressure switches with adjustable


differential and relay output (1)

Dual stage adjustable pressure


switches with solid-state outputs (2)

1
2

Adjustable range of switching point(s) (PH or PH1 and PH2)


(Risingpressure)

225 bar (29362.5 psi)

References
Fluid connection
(3) (4)

G 1/4 female
1/4" NPT female

Weight (kg)

XMLF025E2045
XMLF025E2046
0.590

XMLF025D2035
XMLF025D2036
0.480

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
Min. at low and high setting
(subtractfrom:
Max. at high setting
-PHtogivePB
-PH1&PH2to give PB1 & PB2)
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Electrical connection

Pressure switch operating curves

Rising pressure

(Curve for each stage for dual stage pressure switches)

0.75 bar (10.9 psi)


23.8 bar (345.1 psi)

For each stage:


min. at low and high setting: 0.75 bar (10.9 psi)
max. at high setting: 23.8 bar (345.1 psi)

100 bar (1450 psi)


150 bar (2175 psi)
a 120 V
c 24 V
a 102132 V
c 1733 V
32 mA
80 mA
Relay
Programmable, NPN or PNP and NO or NC
Adjustable time delay on trip and on reset from 0 to 50 s, in steps of 1 second
2.5 A, AC-15, C300 (120 V - 1.5 A)
200 mA
SAE 7/8-16UN, 5-pin male connector.
M12, 4-pin male connector. For suitable
For suitable female pre-wired connectors,
female connectors, including pre-wired
see page 2/70.
versions, see page 2/70
(1) Pressure switches with adjustable differential for regulation between 2 thresholds. Relay output.
(2) Pressure switches with 2 adjustable stages and adjustable differential for each threshold.
Solid-state outputs.
(3) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(4) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure switches with relay output

4
5
6
7

Dual stage pressure switches

bar
25
20

Pressure

Pressure

PH

PH2

PB2

10

PH1
PB1

PB

2
0 1.2

10

Time

20 24.2 bar
Falling pressure

1 Maximum differential
2 Minimum differential

Adjustable value

Time

Adjustable value

10
Accessories:
page 2/70

Dimensions:
page 2/71

Schemes:
page 2/71

2/55

Electronic pressure sensors

References,
characteristics

OsiSense XM, type XMLF


Size 40 bar (580 psi)

Type

Pressure transmitters

Universal sensors with adjustable


differential. Solid-state and analogue
outputs (1)

3.240 bar (46.4580 psi)

1
2
3

Adjustable range of switching point (PH)


(Rising pressure)
Analogue output

4-20 mA

XMLF040D2015
XMLF040D2016
0.500

G 1/4 female
1/4" NPT female

Weight (kg)

0-10 V

XMLF040D2115
XMLF040D2116

XMLF040D2025
XMLF040D2026

XMLF040D2125
XMLF040D2126

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
(subtract from PH togivePB)

Min. at low and high setting


Max. at high setting
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Analogue output

4-20 mA

References
Fluid connection
(2) (3)

0-10 V

Electrical connection

Curves

Analogue output curve

160 bar (2320 psi)


240 bar (3480 psi)
c 24 V
c 1733 V
80 mA

1.2 bar (17.4 psi)


38 bar (551 psi)

Programmable, NPN or PNP and NO or NC


Adjustable time delay on trip and on reset from
0 to 50 s, in steps of 1 second

200 mA
420 mA or 010 V, depending on model. Maximum signal level adjustable between 30 and
50 bar (435 and 725 psi)
M12, 4-pin male connector. For suitable female connectors, including pre-wired versions,
see page 2/70
(1) Pressure sensors with adjustable differential for regulation between 2 thresholds. Solid-state
and analogue outputs.
(2) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(3) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure sensor operating curves


bar
40

Rising pressure

20 mA - 10 V

Pressure

30

PH

20

12 mA - 5 V

PB
10

3.2

4 mA - 0 V

10

20

30

40

50 bar

10

20

38.8 bar
30
Falling pressure

1 Maximum differential
2 Minimum differential

10
Accessories:
page 2/70

2/56

Dimensions:
page 2/71

Schemes:
page 2/71

Time

Adjustable value

References,
characteristics (continued)

Type

Electronic pressure sensors


OsiSense XM, type XMLF
Size 40 bar (580 psi)

Pressure switches with adjustable


differential and relay output (1)

Dual stage adjustable pressure


switches with solid-state outputs (2)

1
2

Adjustable range of switching point(s) (PH or PH1 and PH2)


(Risingpressure)

3.240 bar (46.4580 psi)

References
Fluid connection
(3) (4)

G 1/4 female
1/4" NPT female

Weight (kg)

XMLF040E2045
XMLF040E2046
0.610

XMLF040D2035
XMLF040D2036
0.500

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
Min. at low and high setting
(subtractfrom:
Max. at high setting
-PHtogivePB
-PH1&PH2to give PB1 & PB2)
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Electrical connection

Pressure switch operating curves

(Curve for each stage for dual stage pressure switches)

1.2 bar (17.4 psi)


38 bar (551 psi)

For each stage:


min. at low and high setting: 1.2 bar (17.4 psi)
max. at high setting: 38 bar (551 psi)

160 bar (2320 psi)


240 bar (3480 psi)
a 120 V
c 24 V
a 102132 V
c 1733 V
32 mA
80 mA
Relay
Programmable, NPN or PNP and NO or NC
Adjustable time delay on trip and on reset from 0 to 50 s, in steps of 1 second
2.5 A, AC-15, C300 (120 V - 1.5 A)
200 mA
M12, 4-pin male connector. For suitable
SAE 7/8-16UN, 5-pin male connector.
female connectors, including pre-wired
For suitable female pre-wired connectors,
versions, see page 2/70
see page 2/70.
(1) Pressure switches with adjustable differential for regulation between 2 thresholds. Relay output.
(2) Pressure switches with 2 adjustable stages and adjustable differential for each threshold.
Solid-state outputs.
(3) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(4) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure switches with relay output

4
5
6
7

Dual stage pressure switches

Rising pressure

bar
40

30

Pressure

Pressure

PH

PH2

PB2

20

PH1
PB1

PB
10
3.2
0

10

20

Time

38.8 bar
30
Falling pressure

1 Maximum differential
2 Minimum differential

Adjustable value

Time

Adjustable value

10
Accessories:
page 2/70

Dimensions:
page 2/71

Schemes:
page 2/71

2/57

Electronic pressure sensors

References,
characteristics

OsiSense XM, type XMLF


Size 70 bar (1015 psi)

Type

Pressure transmitters

Universal sensors with adjustable


differential. Solid-state and analogue
outputs (1)

5.670 bar (81.21015 psi)

1
2
3

Adjustable range of switching point (PH)


(Rising pressure)
Analogue output

4-20 mA

0-10 V

4-20 mA

0-10 V

References
Fluid connection
(2) (3)

4
5

G 1/4 female
1/4" NPT female

Weight (kg)

XMLF070D2115
XMLF070D2116

XMLF070D2025
XMLF070D2026

XMLF070D2125
XMLF070D2126

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
(subtract from PH togivePB)

Min. at low and high setting


Max. at high setting
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Analogue output

XMLF070D2015
XMLF070D2016
0.500

Electrical connection

Curves

Analogue output curve

280 bar (4060 psi)


420 bar (6090 psi)
c 24 V
c 1733 V
80 mA

2.1 bar (30.5 psi)


66.5 bar (964.2 psi)

Programmable, NPN or PNP and NO or NC


Adjustable time delay on trip and on reset from
0 to 50 s, in steps of 1 second

200 mA
420 mA or 010 V, depending on model. Maximum signal level adjustable between 52.5 and
87.5 bar (761.3 and 1268.7 psi)
M12, 4-pin male connector. For suitable female connectors, including pre-wired versions,
see page 2/70
(1) Pressure sensors with adjustable differential for regulation between 2 thresholds. Solid-state
and analogue outputs.
(2) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(3) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure sensor operating curves

Rising pressure

20 mA - 10 V

bar
70
Pressure

PH

50

12 mA - 5 V

PB
20

5.6

4 mA - 0 V

20

52.5

70

87.5 bar

0 3.5

20

1 Maximum differential
2 Minimum differential

10
Accessories:
page 2/70

2/58

Dimensions:
page 2/71

Schemes:
page 2/71

Time

50
67.9 bar
Falling pressure

Adjustable value

References,
characteristics (continued)

Type

Electronic pressure sensors


OsiSense XM, type XMLF
Size 70 bar (1015 psi)

Pressure switches with adjustable


differential and relay output (1)

Dual stage adjustable pressure


switches with solid-state outputs (2)

1
2

Adjustable range of switching point(s) (PH or PH1 and PH2)


(Risingpressure)

5.670 bar (81.21015 psi)

References
Fluid connection
(3) (4)

G 1/4 female
1/4" NPT female

Weight (kg)

XMLF070E2045
XMLF070E2046
0.610

XMLF070D2035
XMLF070D2036
0.500

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
Min. at low and high setting
(subtractfrom:
Max. at high setting
-PHtogivePB
-PH1&PH2to give PB1 & PB2)
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Electrical connection

Pressure switch operating curves

(Curve for each stage for dual stage pressure switches)

2.1 bar (30.5 psi)


66.5 bar (964.2 psi)

For each stage:


min. at low and high setting: 2.1 bar (30.5 psi)
max. at high setting: 66.5 bar (964.2 psi)

280 bar (4060 psi)


420 bar (6090 psi)
a 120 V
c 24 V
a 102132 V
c 1733 V
32 mA
80 mA
Relay
Programmable, NPN or PNP and NO or NC
Adjustable time delay on trip and on reset from 0 to 50 s, in steps of 1 second
2.5 A, AC-15, C300 (120 V - 1.5 A)
200 mA
M12, 4-pin male connector. For suitable
SAE 7/8-16UN, 5-pin male connector.
female connectors, including pre-wired
For suitable female pre-wired connectors,
versions, see page 2/70
see page 2/70.
(1) Pressure switches with adjustable differential for regulation between 2 thresholds. Relay output.
(2) Pressure switches with 2 adjustable stages and adjustable differential for each threshold.
Solid-state outputs.
(3) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(4) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure switches with relay output

4
5
6
7

Dual stage pressure switches

Rising pressure

bar
70

50

Pressure

Pressure

PH

PH2

PB2
PH1
PB1

PB
20

5.6
0 3.5

20

Time

50
67.9 bar
Falling pressure

1 Maximum differential
2 Minimum differential

Adjustable value

Time

Adjustable value

10
Accessories:
page 2/70

Dimensions:
page 2/71

Schemes:
page 2/71

2/59

Electronic pressure sensors

References,
characteristics

OsiSense XM, type XMLF


Size 100 bar (1450 psi)

Type

Pressure transmitters

Universal sensors with adjustable


differential. Solid-state and analogue
outputs (1)

8100 bar (1161450 psi)

1
2
3

Adjustable range of switching point (PH)


(Rising pressure)
Analogue output

4-20 mA

0-10 V

4-20 mA

0-10 V

References
Fluid connection
(2) (3)

4
5

XMLF100D2015
XMLF100D2016
0.500

G 1/4 female
1/4" NPT female

Weight (kg)

XMLF100D2025
XMLF100D2026

XMLF100D2125
XMLF100D2126

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
(subtract from PH togivePB)

Min. at low and high setting


Max. at high setting
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Analogue output

XMLF100D2115
XMLF100D2116

Electrical connection

Curves

Analogue output curve

400 bar (5800 psi)


600 bar (8700 psi)
c 24 V
c 1733 V
80 mA

3 bar (43.5 psi)


95 bar (1377.5 psi)

Programmable, NPN or PNP and NO or NC


Adjustable time delay on trip and on reset from
0 to 50 s, in steps of 1 second

200 mA
420 mA or 010 V, depending on model. Maximum signal level adjustable between 75 and
125 bar (1087.5 and 1812.5 psi)
M12, 4-pin male connector. For suitable female connectors, including pre-wired versions,
see page 2/70
(1) Pressure sensors with adjustable differential for regulation between 2 thresholds. Solid-state
and analogue outputs.
(2) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(3) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure sensor operating curves

Rising pressure

20 mA - 10 V

8
12 mA - 5 V

bar
100
Pressure

PH

50

PB

4 mA - 0 V

50

75

100

125 bar

50

97 bar
Falling pressure

1 Maximum differential
2 Minimum differential

10
Accessories:
page 2/70

2/60

Dimensions:
page 2/71

Schemes:
page 2/71

Time

Adjustable value

References,
characteristics (continued)

Type

Electronic pressure sensors


OsiSense XM, type XMLF
Size 100 bar (1450 psi)

Pressure switches with adjustable


differential and relay output (1)

Dual stage adjustable pressure


switches with solid-state outputs (2)

1
2

Adjustable range of switching point(s) (PH or PH1 and PH2)


(Risingpressure)

8100 bar (1161450 psi)

References
Fluid connection
(3) (4)

G 1/4 female
1/4" NPT female

Weight (kg)

XMLF100E2045
XMLF100E2046
0.610

XMLF100D2035
XMLF100D2036
0.500

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
Min. at low and high setting
(subtractfrom:
Max. at high setting
-PHtogivePB
-PH1&PH2to give PB1 & PB2)
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Electrical connection

Pressure switch operating curves

(Curve for each stage for dual stage pressure switches)

3 bar (43.5 psi)


95 bar (1377.5 psi)

For each stage:


min. at low and high setting: 3 bar (43.5 psi)
max. at high setting: 95 bar (1377.5 psi)

400 bar (5800 psi)


600 bar (8700 psi)
a 120 V
c 24 V
a 102132 V
c 1733 V
32 mA
80 mA
Relay
Programmable, NPN or PNP and NO or NC
Adjustable time delay on trip and on reset from 0 to 50 s, in steps of 1 second
2.5 A, AC-15, C300 (120 V - 1.5 A)
200 mA
SAE 7/8-16UN, 5-pin male connector.
M12, 4-pin male connector. For suitable
For suitable female pre-wired connectors,
female connectors, including pre-wired
see page 2/70.
versions, see page 2/70
(1) Pressure switches with adjustable differential for regulation between 2 thresholds. Relay output.
(2) Pressure switches with 2 adjustable stages and adjustable differential for each threshold.
Solid-state outputs.
(3) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(4) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure switches with relay output

Dual stage pressure switches

Rising pressure

bar
100

Pressure

Pressure

PH

PH2

5
6
7
8

PB2

50

PH1
PB1

PB

8
0

50

1 Maximum differential
2 Minimum differential

Accessories:
page 2/70

Time

97 bar
Falling pressure

Adjustable value

Time

Adjustable value

10
Dimensions:
page 2/71

Schemes:
page 2/71

2/61

Electronic pressure sensors

References,
characteristics

OsiSense XM, type XMLF


Size 160 bar (2320 psi)

Type

Pressure transmitters

Universal sensors with adjustable


differential. Solid-state and analogue
outputs (1)

12.8160 bar (185.62320 psi)

1
2
3

Adjustable range of switching point (PH)


(Rising pressure)
Analogue output

4-20 mA

XMLF160D2015
XMLF160D2016
0.590

G 1/4 female
1/4" NPT female

Weight (kg)

0-10 V

XMLF160D2115
XMLF160D2116

XMLF160D2025
XMLF160D2026

XMLF160D2125
XMLF160D2126

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
(subtract from PH togivePB)

Min. at low and high setting


Max. at high setting
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Analogue output

4-20 mA

References
Fluid connection
(2) (3)

0-10 V

Electrical connection

Curves

Analogue output curve

640 bar (9280 psi)


960 bar (13 920 psi)
c 24 V
c 1733 V
80 mA

4.8 bar (69.6 psi)


152 bar (2204 psi)

Programmable, NPN or PNP and NO or NC


Adjustable time delay on trip and on reset from
0 to 50 s, in steps of 1 second

200 mA
420 mA or 010 V, depending on model. Maximum signal level adjustable between 120 and
200 bar (1740 and 2900 psi)
M12, 4-pin male connector. For suitable female connectors, including pre-wired versions,
see page 2/70
(1) Pressure sensors with adjustable differential for regulation between 2 thresholds. Solid-state
and analogue outputs.
(2) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(3) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure sensor operating curves


bar
160

Rising pressure

20 mA - 10 V

Pressure

100

PH

12 mA - 5 V

PB

12.8

4 mA - 0 V

100 120

160

200 bar

1 Maximum differential
2 Minimum differential

10
Accessories:
page 2/70

2/62

Dimensions:
page 2/71

Schemes:
page 2/71

Time

155.2 bar
100
Falling pressure

Adjustable value

References,
characteristics (continued)

Type

Electronic pressure sensors


OsiSense XM, type XMLF
Size 160 bar (2320 psi)

Pressure switches with adjustable


differential and relay output (1)

Dual stage adjustable pressure


switches with solid-state outputs (2)

1
2

Adjustable range of switching point(s) (PH or PH1 and PH2)


(Risingpressure)

12.8160 bar (185.62320 psi)

References
Fluid connection
(3) (4)

G 1/4 female
1/4" NPT female

Weight (kg)

XMLF160E2045
XMLF160E2046
0.700

XMLF160D2035
XMLF160D2036
0.590

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
Min. at low and high setting
(subtractfrom:
Max. at high setting
-PHtogivePB
-PH1&PH2to give PB1 & PB2)
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Electrical connection

Pressure switch operating curves

(Curve for each stage for dual stage pressure switches)

4.8 bar (69.6 psi)


152 bar (2204 psi)

For each stage:


Min. at low and high setting: 4.8 bar (69.6 psi)
Max. at high setting: 152 bar (2204 psi)

640 bar (9280 psi)


960 bar (13 920 psi)
a 120 V
c 24 V
a 102132 V
c 1733 V
32 mA
80 mA
Relay
Programmable, NPN or PNP and NO or NC
Adjustable time delay on trip and on reset from 0 to 50 s, in steps of 1 second
2.5 A, AC-15, C300 (120 V - 1.5 A)
200 mA
SAE 7/8-16UN, 5-pin male connector.
M12, 4-pin male connector. For suitable
For suitable female pre-wired connectors,
female connectors, including pre-wired
see page 2/70.
versions, see page 2/70
(1) Pressure switches with adjustable differential for regulation between 2 thresholds. Relay output.
(2) Pressure switches with 2 adjustable stages and adjustable differential for each threshold.
Solid-state outputs.
(3) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(4) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure switches with relay output

4
5
6
7

Dual stage pressure switches

Rising pressure

bar
160

100

Pressure

Pressure

PH

PH2

PB2
PH1
PB1

PB

12.8
0

1 Maximum differential
2 Minimum differential

Time

Time

155.2 bar
100
Falling pressure

Adjustable value

Adjustable value

10
Accessories:
page 2/70

Dimensions:
page 2/71

Schemes:
page 2/71

2/63

Electronic pressure sensors

References,
characteristics

OsiSense XM, type XMLF


Size 250 bar (3625 psi)

Type

Pressure transmitters

Universal sensors with adjustable


differential. Solid-state and analogue
outputs (1)

20250 bar (2903625 psi)

1
2
3

Adjustable range of switching point (PH)


(Rising pressure)
Analogue output

4-20 mA

0-10 V

4-20 mA

0-10 V

References
Fluid connection
(2) (3)

4
5

XMLF250D2015
XMLF250D2016
0.590

G 1/4 female
1/4" NPT female

Weight (kg)

XMLF250D2025
XMLF250D2026

XMLF250D2125
XMLF250D2126

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
(subtract from PH togivePB)

Min. at low and high setting


Max. at high setting
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Analogue output

XMLF250D2115
XMLF250D2116

Electrical connection

Curves

Analogue output curve

1000 bar (14 500 psi)


1500 bar (21 750 psi)
c 24 V
c 1733 V
80 mA

7.5 bar (108.8 psi)


237.5 bar (3443.7 psi)

Programmable, NPN or PNP and NO or NC


Adjustable time delay on trip and on reset from
0 to 50 s, in steps of 1 second

200 mA
420 mA or 010 V, depending on model. Maximum signal level adjustable between 187 and
312 bar (2711 and 4524 psi)
M12, 4-pin male connector. For suitable female connectors, including pre-wired versions,
see page 2/70
(1) Pressure sensors with adjustable differential for regulation between 2 thresholds. Solid-state
and analogue outputs.
(2) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(3) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure sensor operating curves

Rising pressure

20 mA - 10 V

bar
250
Pressure

200

PH

12 mA - 5 V
100

PB

20

4 mA - 0 V

100

187

250

312 bar

0 12.5

100

1 Maximum differential
2 Minimum differential

10
Accessories:
page 2/70

2/64

Dimensions:
page 2/71

Schemes:
page 2/71

Time

200 242.5 bar


Falling pressure

Adjustable value

References,
characteristics (continued)

Type

Electronic pressure sensors


OsiSense XM, type XMLF
Size 250 bar (3625 psi)

Pressure switches with adjustable


differential and relay output (1)

Dual stage adjustable pressure


switches with solid-state outputs (2)

1
2

Adjustable range of switching point(s) (PH or PH1 and PH2)


(Risingpressure)

20250 bar (2903625 psi)

References
Fluid connection
(3) (4)

G 1/4 female
1/4" NPT female

Weight (kg)

XMLF250E2045
XMLF250E2046
0.700

XMLF250D2035
XMLF250D2036
0.590

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
Min. at low and high setting
(subtractfrom:
Max. at high setting
-PHtogivePB
-PH1&PH2to give PB1 & PB2)
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Electrical connection

Pressure switch operating curves

Rising pressure

(Curve for each stage for dual stage pressure switches)

7.5 bar (108.8 psi)


237.5 bar (3443.7 psi)

For each stage:


Min. at low and high setting: 7.5 bar (108.8 psi)
Max. at high setting: 237.5 bar (3443.7 psi)

1000 bar (14 500 psi)


1500 bar (21 750 psi)
a 120 V
c 24 V
a 102132 V
c 1733 V
32 mA
80 mA
Relay
Programmable, NPN or PNP and NO or NC
Adjustable time delay on trip and on reset from 0 to 50 s, in steps of 1 second
2.5 A, AC-15, C300 (120 V - 1.5 A)
200 mA
M12, 4-pin male connector. For suitable
SAE 7/8-16UN, 5-pin male connector.
female connectors, including pre-wired
For suitable female pre-wired connectors,
versions, see page 2/70
see page 2/70.
(1) Pressure switches with adjustable differential for regulation between 2 thresholds. Relay output.
(2) Pressure switches with 2 adjustable stages and adjustable differential for each threshold.
Solid-state outputs.
(3) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(4) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure switches with relay output

Dual stage pressure switches

4
5
6
7

bar
250
200

Pressure

Pressure

PH

PH2

PB2

100

PH1
PB1

PB

20
0 12.5

100

1 Maximum differential
2 Minimum differential

Accessories:
page 2/70

Time

200 242.5 bar


Falling pressure

Adjustable value

Time

Adjustable value

10
Dimensions:
page 2/71

Schemes:
page 2/71

2/65

Electronic pressure sensors

References,
characteristics

OsiSense XM, type XMLF


Size 400 bar (5800 psi)

Type

Pressure transmitters

Universal sensors with adjustable


differential. Solid-state and analogue
outputs (1)

32400 bar (4645800 psi)

1
2
3

Adjustable range of switching point (PH)


(Rising pressure)
Analogue output

4-20 mA

XMLF400D2015
XMLF400D2016
0.590

G 1/4 female
1/4" NPT female

Weight (kg)

0-10 V

XMLF400D2115
XMLF400D2116

XMLF400D2025
XMLF400D2026

XMLF400D2125
XMLF400D2126

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
(subtract from PH togivePB)

Min. at low and high setting


Max. at high setting
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Analogue output

4-20 mA

References
Fluid connection
(2) (3)

0-10 V

Electrical connection

Curves

Analogue output curve

1200 bar (17 400 psi)


1800 bar (26 100 psi)
c 24 V
c 1733 V
80 mA

12 bar (174 psi)


380 bar (5510 psi)

Programmable, NPN or PNP and NO or NC


Adjustable time delay on trip and on reset from
0 to 50 s, in steps of 1 second

200 mA
420 mA or 010 V, depending on model. Maximum signal level adjustable between 300 and
500 bar (4350 and 7250 psi)
M12, 4-pin male connector. For suitable female connectors, including pre-wired versions,
see page 2/70
(1) Pressure sensors with adjustable differential for regulation between 2 thresholds. Solid-state
and analogue outputs.
(2) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(3) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure sensor operating curves

Rising pressure

20 mA - 10 V

8
12 mA - 5 V

bar
400
Pressure

300

PH

200

PB
100

32

4 mA - 0 V

100

200

300

400

500 bar

0 20

100

200

1 Maximum differential
2 Minimum differential

10
Accessories:
page 2/70

2/66

Dimensions:
page 2/71

Schemes:
page 2/71

Time

388 bar
300
Falling pressure

Adjustable value

References,
characteristics (continued)

Type

Electronic pressure sensors


OsiSense XM, type XMLF
Size 400 bar (5800 psi)

Pressure switches with adjustable


differential and relay output (1)

Dual stage adjustable pressure


switches with solid-state outputs (2)

1
2

Adjustable range of switching point(s) (PH or PH1 and PH2)


(Risingpressure)

32400 bar (4645800 psi)

References
Fluid connection
(3) (4)

G 1/4 female
1/4" NPT female

Weight (kg)

XMLF400E2045
XMLF400E2046
0.700

XMLF400D2035
XMLF400D2036
0.590

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
Min. at low and high setting
(subtractfrom:
Max. at high setting
-PHtogivePB
-PH1&PH2to give PB1 & PB2)
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Electrical connection

Pressure switch operating curves

(Curve for each stage for dual stage pressure switches)

12 bar (174 psi)


380 bar (5510 psi)

For each stage:


Min. at low and high setting: 12 bar (174 psi)
Max. at high setting: 380 bar (5510 psi)

1200 bar (17 400 psi)


1800 bar (26 100 psi)
a 120 V
c 24 V
a 102132 V
c 1733 V
32 mA
80 mA
Relay
Programmable, NPN or PNP and NO or NC
Adjustable time delay on trip and on reset from 0 to 50 s, in steps of 1 second
2.5 A, AC-15, C300 (120 V - 1.5 A)
200 mA
SAE 7/8-16UN, 5-pin male connector. For
M12, 4-pin male connector. For suitable
suitable female pre-wired connectors, see
female connectors, including pre-wired
page 2/70.
versions, see page 2/70
(1) Pressure switches with adjustable differential for regulation between 2 thresholds. Relay output.
(2) Pressure switches with 2 adjustable stages and adjustable differential for each threshold.
Solid-state outputs.
(3) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(4) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure switches with relay output

4
5
6
7

Dual stage pressure switches

Rising pressure

bar
400

300

Pressure

Pressure

PH

PH2

PB2

200

PH1
PB1

PB
100

32
0 20

100

200

Time

388 bar
300
Falling pressure

1 Maximum differential
2 Minimum differential

Adjustable value

Time

Adjustable value

10
Accessories:
page 2/70

Dimensions:
page 2/71

Schemes:
page 2/71

2/67

Electronic pressure sensors

References,
characteristics

OsiSense XM, type XMLF


Size 600 bar (8700 psi)

Type

Pressure transmitters

Universal sensors with adjustable


differential. Solid-state and analogue
outputs (1)

48600 bar (6968700 psi)

1
2
3

Adjustable range of switching point (PH)


(Rising pressure)
Analogue output

4-20 mA

XMLF600D2015
XMLF600D2016
0.590

G 1/4 female
1/4" NPT female

Weight (kg)

0-10 V

XMLF600D2115
XMLF600D2116

XMLF600D2025
XMLF600D2026

XMLF600D2125
XMLF600D2126

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
(subtract from PH togivePB)

Min. at low and high setting


Max. at high setting
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Analogue output

4-20 mA

References
Fluid connection
(2) (3)

0-10 V

Electrical connection

Curves

Analogue output curve

1200 bar (17 400 psi)


1800 bar (26 100 psi)
c 24 V
c 1733 V
80 mA

18 bar (261 psi)


570 bar (8265 psi)

Programmable, NPN or PNP and NO or NC


Adjustable time delay on trip and on reset from
0 to 50 s, in steps of 1 second

200 mA
420 mA or 010 V, depending on model. Maximum signal level adjustable between 450 and
750 bar (6525 and 10 875 psi)
M12, 4-pin male connector. For suitable female connectors, including pre-wired versions,
see page 2/70
(1) Pressure sensors with adjustable differential for regulation between 2 thresholds. Solid-state
and analogue outputs.
(2) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(3) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure sensor operating curves

Rising pressure

20 mA - 10 V

bar
600
Pressure

400

PH

12 mA - 5 V

PB

200

4 mA - 0 V

48

200

450

600

750 bar

0 30

200

1 Maximum differential
2 Minimum differential

10
Accessories:
page 2/70

2/68

Dimensions:
page 2/71

Schemes:
page 2/71

Time

582 bar
400
Falling pressure

Adjustable value

References,
characteristics (continued)

Type

Electronic pressure sensors


OsiSense XM, type XMLF
Size 600 bar (8700 psi)

Pressure switches with adjustable


differential and relay output (1)

Dual stage adjustable pressure


switches with solid-state outputs (2)

1
2

Adjustable range of switching point(s) (PH or PH1 and PH2)


(Risingpressure)

48600 bar (6968700 psi)

References
Fluid connection
(3) (4)

G 1/4 female
1/4" NPT female

Weight (kg)

XMLF600E2045
XMLF600E2046
0.700

XMLF600D2035
XMLF600D2036
0.590

Complementary characteristics not shown under general characteristics (page 2/43)

Possible differential
Min. at low and high setting
(subtractfrom:
Max. at high setting
-PHtogivePB
-PH1&PH2to give PB1 & PB2)
Maximum permissible accidental pressure
Destruction pressure
Rated supply voltage
Voltage limits
Current consumption
Output
Time delay
Switching capacity
Electrical connection

Pressure switch operating curves

(Curve for each stage for dual stage pressure switches)

18 bar (261 psi)


570 bar (8265 psi)

For each stage:


Min. at low and high setting: 18 bar (261 psi)
Max. at high setting: 570 bar (8265 psi)

1200 bar (17 400 psi)


1800 bar (26 100 psi)
a 120 V
c 24 V
a 102132 V
c 1733 V
32 mA
80 mA
Relay
Programmable, NPN or PNP and NO or NC
Adjustable time delay on trip and on reset from 0 to 50 s, in steps of 1 second
2.5 A, AC-15, C300 (120 V - 1.5 A)
200 mA
SAE 7/8-16UN, 5-pin male connector.
M12, 4-pin male connector. For suitable
For suitable female pre-wired connectors,
female connectors, including pre-wired
see page 2/70.
versions, see page 2/70
(1) Pressure switches with adjustable differential for regulation between 2 thresholds. Relay output.
(2) Pressure switches with 2 adjustable stages and adjustable differential for each threshold.
Solid-state outputs.
(3) Fluids controlled: hydraulic oils, fresh water, sea water, air, corrosive fluids, from - 15 to +80C.
Component materials of units in contact with the fluid, see page 2/43.
(4) For SAE 7/16-20UNF and other threads, please consult our Customer Care Centre.

Pressure switches with relay output

4
5
6
7

Dual stage pressure switches

Rising pressure

bar
600

400

Pressure

Pressure

PH

PH2

PB2
PH1
PB1

PB

200

48
0 30

200

1 Maximum differential
2 Minimum differential

Accessories:
page 2/70

Time

Time

582 bar
400
Falling pressure

Adjustable value

Adjustable value

10
Dimensions:
page 2/71

Schemes:
page 2/71

2/69

Electronic pressure sensors

References

OsiSense XM, type XMLF

Accessories and replacement parts

References

Replacement parts

Description

Transparent cover with legends

XMLZL007

Weight
kg
0.020

Sealing gasket

XMLZL010

0.015

All sizes (XMLF)

Accessories
Description
XMLZL007

XMLZL009

XMLZL010

XMLZL008

5
XZCP1141Lp
XZCP1241Lp

Length
ofcable

XMLZL008

Weight
kg
0.037

XMLZL009

0.370

2m
5m
10 m

XZCP1141L2
XZCP1141L5
XZ CP1141L10

0.115
0.270
0.520

Pre-wired M12, elbowed, female connectors

2m
5m
10 m

XZCP1241L2
XZCP1241L5
XZCP1241L10

0.115
0.270
0.520

Pre-wired 7/8"-16UN, straight, female


connectors

2m
5m
10 m

XZCP1764L2
XZCP1764L5
XZCP1764L10

0.185
0.460
0.900

Straight female connector 1 m


2m

XZCR1511041C1
XZCR1511041C2

0.065
0.095

Elbowed female connector 1 m


2m

XZCR1512041C1
XZCR1512041C2

0.065
0.095

Fixing bracket

3
4

Reference

Cooler for versions with


G 1/4 A (male) fluid connection (1)
Usage temperature:
150C for the fluid,
50C for the ambient air
Pre-wired M12, straight, female connectors

M12 - M12 jumper


cables
with straight
male connector,
for splitter box

Reference

(1) Available with other fluid connections (1/4"NPT AND SAE7/16-20UNF. Please consult our
Customer Care Centre.
XZCP1764Lp

7
8
XZCR1511041Cp

9
10

2/70

XZCR1512041Cp

Electronic pressure sensors

Dimensions, schemes

OsiSense XM, type XMLF

Accessories and replacement parts

Dimensions

XMLFpppD2ppp

G1/4

G1/4

XMLZL009

27

10

M12 x 1

16

88

113

142

129

114

XMLZL008

15

12.45

21

(1)

27
46

10

58

138

58
4.2

(1) Female fluid entry


XMLFpppD2pp5: G 1/4 A
XMLFpppD2pp6: 1/4" NPT

4.4

17

20

49.6

XMLFpppE2ppp

31.2

7/8" 16 UN
16

9.63

88

1,5

119

164

XMLZL010

7
2

15

14
19

(1)

27

46

58
138
(1) Female fluid entry
XMLFpppE2pp5: G 1/4 A
XMLFpppE2pp6: 1/4" NPT

Connections (pressure sensor connector pin view)


XMLFpppD201p,
XMLFpppD202p,
XMLFpppD203p
FpppD211p
FpppD212p
Calibration
shunt

Analogue
output

Solid-state
output

Analogue
output

1st stage
solid-state
output
4

XMLFpppE204p

Relay
output

4
5

10

2
1

2 stage
solid-state
output
nd

2/71

General

Electronic pressure sensors


OsiSense XM

For control circuits

Functions

Pressure transmitters
The function of pressure transmitters is the control and measurement of pressure
or vacuum levels in hydraulic or pneumatic systems.
They transform the pressure into an electrical signal which is proportional to the
pressure measured.
Their high precision makes them suitable for all industrial applications requiring
pressure/vacuum display, control or regulation.
Being very robust, they are equally suitable for applications involving high operating rates.
Pressure and vacuum switches
The function of electronic pressure and vacuum switches is the control or regulation
of pressure or vacuum levels in hydraulic or pneumatic systems.
They transform the pressure change into a digital output signal when the preset
pressure or vacuum points are reached. The very wide adjustment range for the
setting points characterise these electronic switches.
Their robustness, together with their excellent adherence to the set values over
a period of time, make them ideal for applications involving high operating rates.
In addition, the high repeat accuracy and fast response time of these sensors
make them equally suitable for applications requiring accurate pressure regulation
and monitoring.
Universal sensors
Universal sensors are electronic pressure and vacuum switches which include
an analogue output, identical to that of the pressure transmitters.

1
2
3
4

Operating principle

Pressure transmitters
The electrical signal from the pressure transmitter (signal proportional to the
pressure being monitored) is amplified, calibrated and output as a standard
4 to 20mA or 0 to 10 V (depending on model) analogue signal.

Signal

420 mA
or 010 V

Operating range

Pressure

Pressure and vacuum switches


Designed for regulation between 2 thresholds (adjustable differential), these switches
have both a high point setting (PH) and a low point setting (PB). Both of these points
can be independently adjusted.
The difference (differential) between the two setting points can be little or considerable,
thus enabling small or large differentials to be set.
Being electronic, the switches have no mechanical moving parts.
Operating principle with solid-state NC outputs
Pressure switches with
Vacuum switches with
digital output
digital output

Pressure

Time

PH
Adjustable
differential
PB

PH

Adjustable value
PH = high point
PB = low point

Time

1 Output on
2 Output off
Dual stage pressure switches

Pressure

PH2
PB2

Adjustable
differential

PH1
Adjustable
differential

10

PB1

2
3

2/72

1
4

2
3

Time

Adjustable
differential
PB

Vacuum

1 Output on
2 Output off
Adjustable value
PH1 = high point 1st stage
PB1 = low point 1st stage
PH2 = high point 2nd stage
PB2 = low point 2nd stage
1 Output 1st stage on
2 Output 1st stage off
3 Output 2nd stage on
4 Output 2nd stage off

General (continued)

Electronic pressure sensors


OsiSense XM

For control circuits

Terminology

Measuring range
The measuring range (MR) of a pressure sensor corresponds to the difference
between the upper and lower values measured by the load cell. It is comprised
between 0 bar and the pressure corresponding to the size of the sensor.
Operating range
The operating range of a pressure transmitter corresponds to its measuring
range. Within this range, its analogue output signal varies between 4 and 20 mA
or 0 and 10V and is proportional to the measured pressure.
The operating range of a pressure or vacuum switch is the difference between
the minimum low point (PB) and the maximum high point (PH) setting values.
Precision
This comprises linearity, hysteresis, repeat accuracy and setting tolerances.
It is expressed as a % of the measuring range (MR) of the load cell (%MR).

1
2
3

The linearity is the maximum deviation


between the real transmitted curve and
the ideal curve.

Signal

Pressure
Signal

The hysteresis is the maximum


deviation between the rising pressure
curve and the falling pressure curve.

Pressure
Signal

The repeat accuracy is the maximum


drift encountered at varying pressures
under given conditions.

Pressure
Signal

Signal

The setting tolerances are the


manufacturers tolerances regarding
the zero point and sensitivity (gradient
of output signal curve from the pressure
transmitter).
Pressure

Pressure

Temperature drift
The precision of a pressure sensor is always susceptible to variation due to the
operating temperature.
Signal

t
t

Zero point drift


This is proportional to the temperature
and is expressed as % MR/C.

8
9

Pressure
Signal

t
t

Sensitivity drift
This is proportional to the temperature
and is expressed as % MR/C.

Pressure

2/73

10

General (continued)

Electronic pressure sensors


OsiSense XM

For control circuits

Terminology (continued)

Switching point on rising pressure (PH)


The upper pressure setting at which the output of the electronic pressure or vacuum
switch changes state on rising pressure.

Switching point on falling pressure (PB)


The lower pressure setting at which the output of the electronic pressure or vacuum
switch changes state on falling pressure.
Differential
The difference between the switching point on rising pressure (PH) and the
switching point on falling pressure (PB). The low point can be set at the values
indicated on the operating curves shown on the product pages.

Repeat accuracy
The variation of the operating point of the pressure or vacuum switch between
several successive operations.

Size
Pressure transmitters and pressure switches
This is the maximum value of the operating range.
Vacuum transmitters and vacuum switches
This is the minimum value of the operating range.

Maximum permissible accidental pressure


The maximum pressure (excluding pressure surges) that the sensor can occasionally
withstand without permanent damage.

Destruction pressure
The pressure value which if exceeded is likely to cause serious damage to the
sensor, i.e. leaking, bursting, component failure, etc.

Load resistance of pressure transmitters


The supply voltage and load resistance of a pressure transmitter must be selected
according to the formula:

R load = U supply - U supply min. (U supply min. = 11 V for XMLE and 17 V for XMLF)
0.02A

8
9
10

2/74

General (continued)

Electronic pressure sensors


OsiSense XM

For control circuits

Features of pressure sensors XMLF

Pressure sensors type XMLF (see page 2/42) feature numerous configuration
possibilities with regards to the display (response time, choice of bar or psi units of
measurement), analogue output signal operation (maximum signal output
adjustable between 75% and 125% of the units size), solid-state output operation
(PNP or NPN, NO or NC, time delay on opening or on closing, response time) and
status signalling (see below).
A diagnostic function is incorporated which enables verification, at any time, of the
sensors correct operation (see below) and also, to provide information regarding
pressure peak values.
Self-test function (calibration shunt)
All pressure sensors XMLF incorporate a diagnostic function which can be used,
at any time, to check the correct operation of the unit. It comprises an internal
system which enables automatic monitoring of all the sensor circuits, including the
ceramic pressure measuring load cell.
For all models, this function is manually activated and the result of the test is indicated
on the display (DONE or ERR).
For pressure transmitters, this function can also be remotely activated via a digital
input connected to a PLC, thus enabling automatic verification without the need
of intervention by an operator. In this instance, the self-test also generates
an analogue output signal which is equivalent to 50% of the sensors size (12 mA
or 5V) which, in turn, can be verified by the PLC.
The unit can be considered as defective if the difference between the signal
transmitted and the standard theoretical value is too great.
Operational status signalling
Pressure and vacuum switches XMLF feature status LED indicators for the digital
outputs. Indication can be configured for 2 modes:
- "hysteresis" mode: indicator illuminated when output activated (output off for
NC configuration or output on for NO configuration).
- "window" mode: indicator illuminated when the pressure being measured
is between the high and low set point values.

1
2
3
4
5

Selection of switch size

Size selection is made according to the maximum pressure of the system


to be controlled.

Adherence to pressure
Select a size whereby the nominal pressure is higher than the maximum pressure
of the system to be controlled.
Precision, repeat accuracy
The precision and repeat accuracy are expressed as a percentage of the measuring
range and better detection is achieved when the size of the sensor is close to that
of the maximum pressure of the system to be controlled. As a general rule, avoid
working towards the bottom limit of the measuring range.
Minimum differential of a pressure or vacuum switch
The minimum differential for each switch size is 2% for XML E and 3% for XML F
of its operating range.
Selection example for a pressure switch
Maximum pressure of system = 11 bar
PH = 7 bar
PB = 6 bar
2 alternative choices:
XMLp010ppppp (10 bar) or
XMLp025ppppp (25 bar)
Advantages:
XMLp010ppppp: maximum repeat accuracy and precision
XMLp025ppppp: withstand to overpressure.

6
7
8
9
10

2/75

Potrebbero piacerti anche