Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
The 4002 Phase-Gain detector module is a perfect complement to 5007/5008 and ideal for
many experimental RF applications. Enhances the performance of the AD8302 based core.
Features
RF power control
Impedance measurements
Phase matching
Phase detecting
RF Mixer
Specifications (preliminary):
General
Parameter
Input Frequency
Range
Gain Range
Phase Range
Supply Voltage
Supply Current
Inputs
Parameter
Input Impedance
Input Return Loss
Input Coupling
Magnitude Output
Parameter
Output Scale
Maximum Output
Center Scale
Output current
Bandwidth
Rise/fall time
Phase Output
Maximum Output
Minimum Output
Center Scale
Output current
Bandwidth
Rise/fall time
Test Condition
From 50 source, useful response to
3GHz. Can be used to below 10MHz with
external lowpass filter.
Input at -30dBm
Input at -30dBm
Absolute maximum is 16Vdc
Test
Min
10
3.6
Min
Typ
30
90
5
10
Typ
50
Max
2700
Max
units
MHz
dB
Degrees
V
mA
units
0~500MHz
20
dB
500~1000MHz
15
1000~2000MHz
10
RF input ports are dc coupled and dc voltages should be limited to 2V maximum.
Test
Both inputs at -30dBm 900MHz
RF1=0dBm RF2=-30dBm
RF1=RF2=-30dBm
Sink or source
Small Signal
20dB change
Min
Typ
30
1.8
900
8
10
100
1.8
30
900
8
10
100
Max
units
mV/dB
V
mV
mA
MHz
ns
V
mV
mV
mA
MHz
ns
Note:(bandwidth and rise time limited by internal filter capacitor size. Contract Valon for increase BW options)
7/14/2013
1 of 4 pages
Contact Valon Technology, LLC sales@valontechnology.com
preliminary
Reference Output
Output Voltage
Output Current
Dynamic Range at 100MHz
Parameter
Test
MAG Linearity
1dB linearity, -30dBm Ref
MAG Slope
MAG balance
RF1=RF2=-5dBm to -50dBm
Phase Linearity
1deg. linear
Phase Slope
From linear +90deg to -90 deg
Phase Balance
RF1=RF2=-5dBm to -50dBm
Dynamic Range at 900MHz
Parameter
Test
MAG Linearity
1dB linearity, -30dBm Ref
MAG Slope
MAG balance
RF1=RF2=-5dBm to -50dBm
Phase Linearity
1deg. linear
Phase Slope
From linear +90deg to -90 deg
Phase Balance
RF1=RF2=-5dBm to -50dBm
Dynamic Range at 1900MHz
Parameter
Test
MAG Linearity
1dB linearity, -30dBm Ref
MAG Slope
MAG balance
RF1=RF2=-5dBm to -50dBm
Phase Linearity
1deg. linear
Phase Slope
From linear +90deg to -90 deg
Phase Balance
RF1=RF2=-5dBm to -50dBm
Dynamic Range at 2200MHz
Parameter
Test
MAG Linearity
1dB linearity, -30dBm Ref
MAG Slope
MAG balance
RF1=RF2=-5dBm to -50dBm
Phase Linearity
1deg. linear
Phase Slope
From linear +90deg to -90 deg
Phase Balance
RF1=RF2=-5dBm to -50dBm
7/14/2013
2 of 4 pages
Contact Valon Technology, LLC sales@valontechnology.com
1.7
1.8
5
1.9
V
Ma
Min
Typ
58
29
0.2
145
10
0.7
Max
units
dB
mV/dB
dB
deg.
mV/deg.
deg.
Min
Typ
58
28.7
0.2
143
10.1
0.8
Max
units
dB
mV/dB
dB
deg.
mV/deg.
deg.
Min
Typ
57
27.5
0.2
128
10
1
Max
units
dB
mV/dB
dB
deg.
mV/deg.
deg.
Min
Typ
53
27.5
0.2
115
10
3
Max
units
dB
mV/dB
dB
deg.
mV/deg.
deg.
preliminary
The PHASE output will provide a signal level that is proportional to the relative phase
difference between RF1 and RF2. Typically when the phase of RF1 leads RF2 by 90
degrees then the Phase Output will be 900mV. As the phase of RF1 increases from
90 degrees relative to RF2 the output will decrease at a rate of 10mV/degree. As
with the Magnitude Output, performance parameters such as linearity and noise will
be affected by signal level and frequency.
The DC Reference Output provides a 1.8V signal that can be used with the Magnitude
and Phase output signals as a reference . This signal can be used in a bridge circuit
7/14/2013
3 of 4 pages
Contact Valon Technology, LLC sales@valontechnology.com
preliminary
to provide a convenient zero reference when the RF inputs are equal and the phase
is at 90 degrees.
Mechanical Dimensions
Dimensions are Inches
0.445
1.75
1.50
0.062
0.120
MAG
1.375
DC REF
0.630
2.540
2.750
2.990
0.630
PHASE
RF 2 IN
0.755
RF 1 IN
1.115
+3.6~9V 20ma
0.188
6 places
+
1
0.960
7/14/2013
4 of 4 pages
Contact Valon Technology, LLC sales@valontechnology.com
preliminary