Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
All of our barrier bags and tubing for the following materials meet the MIL-DTL-117
Specifications listed in the excerpt (below the tables) from the official MIL-DTL-117 detail
specification from the US Department of Defense.
Bags And Tubing MIL-DTL-117 Specifications:
Material
Protect PK #1
Protect PK #18
Protect 470
Protect KF
Protect Scrim-B
Protect 1193
Protect 5500
Protect ESD
Protect Stat
100M
Mil-PRF-121
Mil-PRF-131
Type I Class 1
Mil-PRF-131
Type I Class 2
Mil-PRF-131
Type I Class 3
Mil-PRF-22191
Type I
Mil-PRF-22191
Type II
Mil-PRF-81705
Type I Class 1
Mil-PRF-81705
8 x 10
2x3
9x9
2x4
10 x 12
3x3
10 x 14
3x5
12 x 12
4x4
12 x 15
5x5
12 x 20
6x6
18 x 20
5x7
20 x 20
Document(s)
Type(s) Class(es)
MIL-PRF-131
MIL-PRF-22191
1 or 2
1
1 or 2
MIL-PRF-131
MIL-PRF-22191
MIL-PRF-81705
1 or 2
II
MIL-PRF-121
II
MIL-PRF-22191
II
1 or 2
I
II
1 or 2
2
II
MIL-PRF-121
MIL-PRF-22191
II
MIL-PRF-131
II
MIL-PRF-81705
III
III
MIL-PRF-22191 or
A-A-3174 1/
III
I or II
1 or 2
1 2/
III
MIL-PRF-121
II
IV
MIL-PRF-131
1 or 2
-1/16, +1/8
-1/8, +1/4
-1/4, +3/8
-1/4, +1/2
Identification- Each bag shall be marked or printed in capital letters or numbers, using 10-point
type, and shall contain the following information: This specification number and revision letter;
type, class, and style; bag manufacturer's name and bag designation; month; and year of bag
fabrication. Each bag shall contain this printing on at least one surface with the color and
position of the printing being optional. When the marking is interrupted or incomplete due to the
size of the bags, the individual bag need not be marked as specified, but shall be accompanied
within the shipping container by an identification sheet marked or printed with the same
information. When specified, a pressure sensitive label shall be applied to the outer surface of
each bag in lieu of marking the bag.
Sealing recommendation - Each unit package of bags shall include a sheet legibly marked with
the following heat-sealing information.
a. Jaw type sealer (temperature, pressure, and dwell).
b. Band type sealer (temperature, pressure, and dwell).
c. Rotary type sealer (preheat, pressure, and speed).
Heat-seal seam strength - Heat seals shall exhibit no separation for the duration of the 5 minute
test when tested.
Workmanship- Bags shall be free from any foreign matter, pinholes, tears, cuts, splits, slits,
creases, wrinkles, or other imperfections.
About Protective Packaging
Protective Packaging Corporation is the industry leader in the design and manufacture of
military-spec packaging products and readily accepts custom jobs. Regardless of what you need
protected, our specialists have the experience and knowledge to guarantee its integrity.
We can provide ready made and custom barrier bags in all sizes (literally for anything from paper
clips to airplanes) and packaging solutions that meet an array of military specifications.