Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
65
65
65
65
210
210
016
210
set by hand or by optional RCU (Remote Control Unit)
80010684
Type No.
Frequency range
790 862 MHz
Polarization
+45, 45
Average gain (dBi)
14.5 ... 14.4 ... 14.2
Tilt
0 ... 8 ... 16
Horizontal Pattern:
Half-power beam width
69
Front-to-back ratio, copolar
(18030)
> 25 dB
Cross polar ratio
Typically:
Maindirection
0
> 25 dB
Sector
60
> 10 dB
Vertical Pattern:
Half-power beam width
16.5
Electrical tilt, continuously adjust.
0 ... 8 ... 16 T
Sidelobe suppression for
17 ... 15 ... 16 dB
rst sidelobe above main beam
within 020 sector above horizon 17 ... 15 ... 15 dB
Impedance
VSWR
Isolation: Intrasystem
Isolation: Intersystem
Intermodulation IM3
Max. power per input
Total power
790 960
824 894 MHz
+45, 45
14.6 ... 14.5 ... 14.3
0 ... 8 ... 16
1710 1880
1710 1880 MHz
+45, 45
16.1 ... 16.5 ... 16.1
2 ... 6 ... 10
1920 2170
1920 2170 MHz
+45, 45
16.3 ... 16.5 ... 16.1
2 ... 6 ... 10
2490 2690
2490 2690 MHz
+45, 45
16.5 ... 17.1 ... 16.8
2 ... 6 ... 10
68
67
65
64
63
> 25 dB
Typically:
> 25 dB
> 9 dB
> 25 dB
Typically:
> 23 dB
> 9 dB
> 25 dB
Typically:
> 18 dB
> 10 dB
> 25 dB
Typically:
> 21 dB
> 10 dB
> 25 dB
Typically:
> 23 dB
> 10 dB
16.0
016
0 ... 8 ... 16 T
17 ... 15 ... 17 dB
17 ... 15 ... 16 dB
15.0
6.8
210
2 ... 6 ... 10 T
16 ... 15 ... 16 dB
15 ... 15 ... 16 dB
6.0
210
2 ... 6 ... 10 T
15 ... 16 ... 17 dB
15 ... 16 ... 15 dB
4.8
210
2 ... 6 ... 10 T
15 ... 16 ... 17 dB
15 ... 17 ... 14 dB
0 ... 8 ... 16 T
16 ... 15 ... 16 dB
16 ... 15 ... 15 dB
50
50
50
< 1.5
< 1.5
< 1.5
> 30 dB
> 28 dB
> 28 dB
> 30 dB (790960 // 17101880 // 17102170 // 24902690 MHz)
< 150 dBc (2 x 43 dBm carrier)
500 W*
150 W*
150 W*
300 W*
300 W*
1000 W*
50
< 1.5
> 28 dB
150 W*
300 W*
68
16.0
10
Horizontal Pattern
dB
10
dB
Vertical Pattern
016 electrical downtilt
7-16
790960
+45
7-16 7-16
7-16 7-16
7-16
65
7-16 7-16
6.8
Vertical Pattern
210 electrical downtilt
64
Input
Connector position
Adjustment
mechanism
Wind load
6.0
Horizontal Pattern
dB
10
10
Vertical Pattern
210 electrical downtilt
63
4.8
Horizontal Pattern
www.kathrein.de
dB
10
10
dB
936.4379
dB
dB
Horizontal Pattern
dB
Subject to alteration.
Mechanical specifications
10
10
Vertical Pattern
210 electrical downtilt
80010684 Page 1 of 2
KATHREIN-Werke KG Anton-Kathrein-Strae 1 3 P.O. Box 10 04 44 83004 Rosenheim Germany Phone +49 8031 184-0 Fax +49 8031 184-973
Accessories
General Information
Accessories
72
1 clamp
1.1 kg
1 clamp
1 clamp
1 clamp
1 downtilt kit
Mast: 28 60 mm diameter
Mast: 110 220 mm diameter
Mast: 210 380 mm diameter
Downtilt angle: 0 16
0.8 kg
2.7 kg
4.8 kg
2.3 kg
738546
731651
85010002
85010003
737974
64
Weight
approx.
Description
Remarks
Type No.
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.
Wall mounting: No additional mounting kit needed.
Material:
Grounding:
The metal parts of the antenna including the mounting kit and the inner
conductors are DC grounded.
Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regard to the following items:
Low temperature: 55 C
High temperature (dry): +60 C
Adjustment mechanism
with integrated scale
Ice protection: Due to the very sturdy antenna construction and the
protection of the radiating system by the radome, the antenna remains
operational even under icy conditions.
Environmental tests:
134
108
49
46
84
173*
152*
Layout of interface:
48
101
Please note:
Bottom view
* Dimensions refer to radome
As a result of more stringent legal regulations and judgements regarding product liability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4 and thereby
respects the static mechanical load imposed on an antenna by wind at maximum velocity. Wind loads are
calculated according to DIN 1055-4. Extraordinary operating conditions, such as heavy icing or exceptional
dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or
even cause it to fall to the ground. These facts must be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety
regulations.
The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers must
be obeyed.
Any previous datasheet issues have now become invalid.
Page 2 of 2 80010684
www.kathrein.de
KATHREIN-Werke KG Anton-Kathrein-Strae 1 3 P.O. Box 10 04 44 83004 Rosenheim Germany Phone +49 8031 184-0 Fax +49 8031 184-973
936.4379
244
300*
Subject to alteration.
221