Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1
2 4
3 45 7
46
10
8
11
9
Issue 1
DECLARATION OF CONFORMITY Nokia operates a policy of ongoing
Hereby, NOKIA CORPORATION declares development. Nokia reserves the right to
that this HS-107W product is in make changes and improvements to any
compliance with the essential of the products described in this
requirements and other relevant document without prior notice.
provisions of Directive 1999/5/EC. A To the maximum extent permitted by
copy of the Declaration of Conformity applicable law, under no circumstances
can be found at http://www.nokia.com/ shall Nokia or any of its licensors be
phones/declaration_of_conformity/. responsible for any loss of data or
income or any special, incidental,
consequential or indirect damages
howsoever caused.
© 2008 Nokia. All rights reserved. The contents of this document are
provided "as is". Except as required by
Nokia and Nokia Connecting People are applicable law, no warranties of any
registered trademarks of Nokia kind, either express or implied,
Corporation. Other product and including, but not limited to, the implied
company names mentioned herein may warranties of merchantability and
be trademarks or tradenames of their fitness for a particular purpose, are
respective owners. made in relation to the accuracy,
Reproduction, transfer, distribution, or reliability or contents of this document.
storage of part or all of the contents in Nokia reserves the right to revise this
this document in any form without the document or withdraw it at any time
prior written permission of Nokia is without prior notice.
prohibited. The availability of particular products
Bluetooth is a registered trademark of may vary by region. Please check with
Bluetooth SIG, Inc. your Nokia dealer for details.
2
Export controls laws and regulations from the US and
This device may contain commodities, other countries. Diversion contrary to
technology or software subject to export law is prohibited.
Introduction
With the Nokia Bluetooth Headset devices without cables. The phone
BH-102, you can make and receive and the headset do not need to be
calls while on the move. You can in line of sight, but they should be
use the headset with compatible within 10 metres (33 feet) of each
phones that support Bluetooth other. Connections may be subject
wireless technology. to interference from obstructions,
Read this user guide carefully such as walls, or other electronic
before using the headset. Also, devices.
read the user guide for your phone. The headset complies with the
It provides important safety and Bluetooth Specification 2.0 + EDR
maintenance information. Keep that supports the Headset Profile
the headset out of the reach of 1.1 and Hands-Free Profile 1.5.
small children. Check with the manufacturers of
other devices to determine their
Bluetooth wireless compatibility with this device.
technology
Bluetooth wireless technology
allows you to connect compatible
4
charging. Charging the battery To switch off, press and hold the
fully may take up to 2 hours. multifunction key for about 4 to 8
3. When the battery is fully seconds.
charged, the indicator light Pair the headset
turns off. Disconnect the
charger from the headset and 1. Ensure that your phone is
the wall outlet. switched on and the headset is
switched off.
The fully charged battery has
power for up to 10 hours of talk 2. Press and hold the
time or up to 250 hours of standby multifunction key (for about 4
time. to 8 seconds) until the
indicator light starts to flash
When battery power is low, the quickly.
headset beeps once every minute
and the indicator light flashes 3. Activate the Bluetooth feature
quickly. on the phone, and set the
phone to search for Bluetooth
Switch on or off devices.
To switch on, press and hold the 4. Select the headset from the list
multifunction key for about 2 to 4 of found devices.
seconds. The headset beeps, and 5. Enter the passcode 0000 to
the indicator light is displayed. The pair and connect the headset to
headset tries to connect to a your phone. In some phones,
paired device. you may need to make the
Basic use
Put on the headset Call handling
To use the headset on your right To make a call, use your phone in
ear, attach the earloop as shown in the normal way when the headset
Figure 7; to use the headset on is connected to your phone.
your left ear, attach the earloop To redial the number you last
from the other side. Slide the called (if your phone supports this
earloop over your ear (9), and feature with the headset), when
gently push the earpiece into your no call is in progress, press the
ear. Point the headset towards multifunction key twice.
your mouth (10).
To activate voice dialling (if your
phone supports this feature with
the headset), when no call is in
progress, press and hold the
6
multifunction key for about 2 to 4 and press and hold the
seconds. Proceed as described in multifunction key for over 8
the phone user guide. seconds until the headset beeps
To answer or end a call, press the twice and the indicator light
multifunction key. To reject a call, flashes quickly.
press this key twice. To reset the headset if it stops
To adjust the volume during a call, functioning, even though it is
use the phone volume keys. charged, plug the headset into a
charger.
To switch a call between the
headset and a compatible phone, Troubleshooting
press and hold the multifunction If you cannot connect the headset
key for about 2 to 4 seconds. to your compatible phone, check
Clear settings or reset that the headset is charged,
switched on, and paired with your
To delete the pairings from the
phone.
headset, switch off the headset,
Battery information
This device has an internal, charged and discharged hundreds of
nonremovable, rechargeable battery. times, but it will eventually wear out.
Do not attempt to remove the battery Recharge your battery only with
from the device as you may damage Nokia approved chargers designated
the device. The battery can be for this device. Use of an unapproved
8
Care and maintenance
Your device is a product of superior its normal temperature, moisture
design and craftsmanship and should can form inside the device and
be treated with care. The following damage electronic circuit boards.
suggestions will help you protect • Do not attempt to open the
your warranty coverage. device.
• Keep the device dry. Precipitation, • Do not drop, knock, or shake the
humidity, and all types of liquids device. Rough handling can break
or moisture can contain minerals internal circuit boards and fine
that will corrode electronic mechanics.
circuits. If your device does get
• Do not use harsh chemicals,
wet, allow it to dry completely.
cleaning solvents, or strong
• Do not use or store the device in detergents to clean the device.
dusty, dirty areas. Its moving parts
• Do not paint the device. Paint can
and electronic components can
clog the moving parts and prevent
be damaged.
proper operation.
• Do not store the device in hot
If the device is not working properly,
areas. High temperatures can
take it to the nearest authorised
shorten the life of electronic
service facility for service.
devices, damage batteries, and
warp or melt certain plastics.
• Do not store the device in cold
areas. When the device returns to