Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Product Specification
Product Specification
(For Internal Use)
Rev.:X1
Page:1/5
MP3500
Product Specification
Rev.:X1
Page:2/5
1Scope:
This specification is applied to MP3500.
2Applied product and model:
2.1. Name Power Runner.
2.2. Model name MP3500.
3Product specifications:
No
Item
Rated Performance
Li-ion/18650/(2300mAH)
3.6 Capacity
3.7 USB Output Voltage
3.8 USB Over Current
3.10
Fast
Charging
800-1200mA / 3.5-5H
Current/ time
3.11
Slow
Charging
<200mA / 15-20H
Current/ Time
3.13 Capacity/Voltage
indicate
3.14 Output Over Current
6s1p
3.9
Remark
19V/3A
Output Load
Current<2+0.5A
Output
Load
Current>2+0.5A
Red : on charging
Green : 80-90% fully
7 pcs.
1pc
18.1V19.7V20.6V
21.2V21.8V22.5V
23.2V24V +0.4V
Green LED
Red
LED
4-6A
3.15 Traveling
Charger
AC 100V~240V
input Voltage
Traveling
Charger
3.16 Output
Voltage/ DC 19V0.5V/3A
Current
3.17 Typical Weight
430g20g
Operating
Charge 0~40
3.18 Temperature rang
Discharge 10~45
MP3500
Product Specification
Rev.:X1
Page:3/5
Cell Voltage
3.0V
3.2V
3.4V
3.5V
3.6V
3.7V
3.8V
4.0V
Capacity of charging
10~20%
20~30%
30~50%
50~60%
60-70%
70-80%
80-85%
85-95%
Turn On
Total Voltage
Red LED
18.1V
First Green LED
19.7V
Second Green LED
20.6V
Third Green LED
21.2V
Fourth Green LED
21.8V
Fifth Green LED
22.5V
Seventh Green LED
23.2V
eighth Green LED
24.0V
4.4. Traveling Charger test:
Cell Voltage
3.0V
3.2V
3.4V
3.5V
3.6V
3.7V
3.8V
4.0V
Capacity of discharging
10~20%
20~30%
30~50%
50~60%
60-70%
70-80%
80-85%
85-95%
<50mA
<3W
<7W
191V
191V(Load current 3A)
75%
3.5-4A
MP3500
Product Specification
Rev.:X1
Page:4/5
m. Hpot Test:
n. Insulation Resistance:
o. Output DC Plug Specification:
4.5. Self discharge:
No charge/discharge (When not connecting Pulg).
Battery cell self-discharge 150uA
4.6. Cycle life:
Cycle life test > 200 times.
4.7 Reset performance testing:
Adapter connects the power, outputs voltage reset in 5V, change the switching head, output
voltage reset in 5V.
4.8 Switch performance testing:
a. While charging, switch is set aside in Voltage position, the voltage is adjustable; Switch is set
aside in Hold position, The voltage is non-adjustable.
b. While discharging, Switch is set aside in Voltage position, the voltage is adjustable; Switch is
set aside in Hold position; The voltage is non-adjustable.
4.9 Charge and discharge at the same time and test.
a. While charging, pulg have voltage to output.
b. When charge and discharge at the same time , it is greater than 2+0.3A to export the electric
current, charge the electric current to transfer to <200mA.
4.10 Temperature testing:
Export the area and fully loaded with 2H under the normal atmospheric temperature, case
surface temperature is <65.
4.11 USB Output testing:
a. Charging the state, USB does not receive the control ;
b. Discharge state, insert at outputting lining, USB does not receive the control ; Not inserting
it while exporting the line , the switch sets aside to ON, USB has voltage to export, the
switch sets aside to OFF, USB has no voltage to export.
5. Safety:
5.1. Battery cell protection function of PCB
a.Over charge detection voltage:
4.35V0.1V /cell, 26.1V0.4V/pack
b.Over discharge detection voltage:
2.3V0.2V/cell,13.8V0.5V/pack
c. Battery cell over current detection: 4-6A
d.Able to charge the battery pack after over discharge protection action.
e.Able to discharge the battery pack after over charge protection action.
5.2. Battery cell protection:
a. Input Fast Charging Current Limited: .CC:800-1200mA/(input19VDC)
b. Input Slow Charging Current Limited: .CC:<200mA/(input19VDC)
c. Temperature limited: 139(cell surface).
MP3500
Product Specification
Rev.:X1
6. Handing warning
6.1 Specified product use only.
6.2 Do not immerse in water or pour.
Do not heat or throw in fire.
6.3
Do not leave in conditions where more than 60 or in heated car . Also do not
charge/discharge in conditions specified.
6.4
6.5
Page:5/5