Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
kHz.
Correct.
Note:
Use the oscilloscope's time markers to determine the sampling frequency.
A cursor control element is located on the lower part of the oscilloscope's
control panel. Select channel A with this element. You will also obtain two
amplitude markers for measuring voltages, and two time markers for
measuring time and determining frequency.
The markers can be moved to the required positions using the mouse. The
corresponding values are indicated at the top right, and can be copied to the
course page.
Describe the signal measured on the sample-and-hold element. Which of the
following statements are correct?
A sinusoidal signal is sampled 8 times per period.
A sinusoidal signal is sampled 4 times per period.
The time intervals between the sampling points are
variable.
The time intervals between the sampling points are
constant.
The signal between the sample-and-hold points
drops to zero.
The signal between the sample-and-hold points
follows the input signal.
Correct.
Describe the PAM signal. Which of the following statements are correct?
The intervals between the pulses are variable.
The intervals between the pulses are constant.
The signal between the pulses drops to zero.
The signal between the pulses follows the input
signal.
The pulse amplitude corresponds to the value of the
Correct.
4 kHz.
Correct.
8 kHz
44.1 kHz
Explain how a PAM signal is formed.
The
original
signal is
The
sampleand-hold
element
maintains
The
sampled
amplitude
values
are used
to
The
modulate
d signal's
pulse
amplitude
is equal to
Correct
.
Correct.
Correct.