Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
- An Understanding
2014-October
My ASNT Level III Pre-Exam Preparatory Self Study Notes
Expert at Works
Expert at Works
http://eddycurrent.net/gallery/index.php/Palm-Cooling-Discovery-Gardens/IMG_2100
Expert at Works
http://ropax.co.uk/eddy-current-inspection.html
Expert at Works
http://ropax.co.uk/eddy-current-inspection.html
Expert at Works
http://ropax.co.uk/eddy-current-inspection.html
Overview:
Eddy-current test uses electromagnetic induction to detect flaws in conductive
materials. The eddy current test set-up consists of a circular coil which is
placed on the test surface.
The alternating current in the coil generates changing magnetic field which
interacts with the conductive test surface and generates eddy current. The
flow of eddy current can be disrupted due to change in resistivity or
conductivity, magnetic permeability, any physical discontinuities. The change
in eddy current flow and a corresponding change in the phase and amplitude
is measured against known values. Eddy current test method can detect
very small cracks in or near the surface of the material, the surfaces need
minimum preparation. The biggest advantage of the eddy current test method
is that is can be employed to determine surface flaws on painted or coated
surface. Eddy current flaw detection is commonly used in the aerospace
industry, crane industry, concrete pumping industry and other general
industries where the protective surface coating cannot be removed.
The crane industry and crane owners benefits most from the application of
eddy current test method to detect surface flaws underneath the protective
coating (paint ). The exorbitant cost of paint removal and repainting is
eliminated by applying eddy current flaw detection method as compared to
magnetic particle test. It is also useful for making electrical conductivity and
coating thickness measurements. Eddy current test is commonly employed
for rapid thickness testing of coatings conductive and non-conductive.
The principle of eddy current test which measures the change in resistivity in
the conductive material makes it useful in wide range of applications such as
conductivity measurement, sorting of material, assessment of heat treatment
condition, sorting of materials on the basis of hardness and strength,
thickness measurement of thin components. Compared to other surface
flaw detection methods, eddy current test requires highly trained, skilled and
experienced technicians. LMATS professionals are qualified, certified and
experienced in eddy current test.
Contents
1.
2.
3.
4.
5.
6.
7.
Introduction
The Principle of Eddy Current Testing
Eddy Current
Faradays Law
Lenzs Law
Inductance
Impedance
1.0
Introduction:
2.0
Characteristics
Contactless and nondestructive
extremely fast (we utilize up to 50,000 samples per second)
good automation abilities
high sensitivity
Method variations
Impedance - Spectroscopy (cf. Fraunhofer IZFP Dresden)
Multi-frequency eddy current testing
Impulse eddy current
Frequency sweeping analysis
Skin effect
Eddy currents concentrate near the surface close to an induction coil and
their strength decreases with distance from the coil. The EC density is being
largest near the surface of the conductor, decreasing exponentially at greater
depths. This decay is known as the term, Skin effect. The skin effect occurs
when induced Eddy Currents at the surface generate an opposed magnetic
field that lowers the entire resulting field, thus causing a decrease in current
flow as the depth increases.
http://www.suragus.com/en/company/eddy-current-testing-technology
3.0
Eddy Current
Eddy currents (also called Foucault currents) are circular electric currents
induced within conductors by a changing magnetic field in the conductor, due
to Faraday's law of induction. Eddy currents flow in closed loops within
conductors, in planes perpendicular to the magnetic field. They can be
induced within
(1) nearby stationary conductors by a time-varying magnetic field created by
an AC electromagnet or transformer, for example, or by
(2) relative motion between a magnet and a nearby conductor.
The magnitude of the current in a given loop is proportional to the strength of
the magnetic field, the area of the loop, and the rate of change of flux, and
inversely proportional to the resistivity of the material.
Keywords:
Faradays law of induction
By Lenz's law, an eddy current creates a magnetic field that opposes the
magnetic field that created it, and thus eddy currents react back on the source
of the magnetic field. For example, a nearby conductive surface will exert a
drag force on a moving magnet that opposes its motion, due to eddy currents
induced in the surface by the moving magnetic (changing) field. This effect is
employed in eddy current brakes which are used to stop rotating power tools
quickly when they are turned off. The current flowing through the resistance of
the conductor also dissipates energy as heat in the material. Thus eddy
currents are a source of energy loss in alternating current (AC) inductors,
transformers, electric motors and generators, and other AC machinery,
requiring special construction such as laminated magnetic cores to minimize
them. Eddy currents are also used to heat objects in induction heating
furnaces and equipment, and to detect cracks and flaws in metal parts using
eddy-current testing instruments. Eddy currents can take time to build up and
can persist for very short times in conductors due to their inductance.
Keywords:
Lenzs law
The Laws: As the probe is energized with AC current (the strength of primary magnetic field is
alternating and changing), and so an eddy current is set up (Faradays law) in the
counterclockwise direction (Lenzs law)
http://www.youtube.com/embed/djFvnFy3rJc
http://www.youtube.com/watch?v=V-IW6cFIt9E
Charlie Chong/ Fion Zhang
Induction Damping
As discussed in motional emf, motional emf is induced when a conductor moves in a magnetic
field or when a magnetic field moves relative to a conductor. If motional emf can cause a current
loop in the conductor, we refer to that current as an eddy current. Eddy currents can produce
significant drag, called magnetic damping, on the motion involved. A common physics
demonstration device for exploring eddy currents and magnetic damping. (a) The motion of a
metal pendulum bob swinging between the poles of a magnet is quickly damped by the action of
eddy currents. (b) There is little effect on the motion of a slotted metal bob, implying that eddy
currents are made less effective. (c) There is also no magnetic damping on a non-conducting
bob, since the eddy currents are extremely small.
A more detailed look at the conducting plate passing between the poles of a magnet. As it enters
and leaves the field, the change in flux produces an eddy current. Magnetic force on the current
loop opposes the motion. There is no current and no magnetic drag when the plate is completely
inside the uniform field.
http://legacy.cnx.org/content/m42404/latest/
When a slotted metal plate enters the field, as shown in Figure below, an emf is induced by the
change in flux, but it is less effective because the slots limit the size of the current loops.
Moreover, adjacent loops have currents in opposite directions, and their effects cancel. When an
insulating material is used, the eddy current is extremely small, and so magnetic damping on
insulators is negligible. If eddy currents are to be avoided in conductors, then they can be slotted
or constructed of thin layers of conducting material separated by insulating sheets.
http://legacy.cnx.org/content/m42404/latest/
Induction Heating
http://inductionbending.co.uk/gallery
Eddy currents (I, red) induced in a conductive metal plate (C) as it moves to right
under a magnet (N). The magnetic field (B, green) is directed down through the plate.
From Lenz's law the increasing field at the leading edge of the magnet (left)
(increasing field) induces a counterclockwise current, which creates its own magnetic
field (left blue arrow) directed up, which opposes the magnet's field, producing a
retarding force. Similarly, at the trailing edge of the magnet (right) (decreasing field), a
clockwise current and downward counterfield is created (right blue arrow) also
producing a retarding force.
A more detailed look at the conducting plate passing between the poles of a
magnet. As it enters and leaves the field, the change in flux produces an eddy
current. Magnetic force on the current loop opposes the motion. There is no
current and no magnetic drag when the plate is completely inside the uniform
field.
Opposing C
from entering
Opposing C
from leaving
Lenz's law states that the current swirls in such a way as to create an induced
magnetic field that opposes the phenomenon that created it. In the case of a
varying applied field, the induced field will always be in the opposite direction
to that applied. The same will be true when a varying external field is
increasing in strength. However, when a varying field is falling in strength,
the induced field will be in the same direction as that originally applied,
in order to oppose the decline.
www.youtube.com/embed/d_aTC0iKO68
www.youtube.com/embed/bBwM3Q6zGag
http://www.fanpop.com/clubs/che-guevara/images/21468922/title/che-photo
Levitation
4.0
Faraday's Law
Any change in the magnetic environment of a coil of wire will cause a voltage
(emf) to be "induced" in the coil. No matter how the change is produced, the
voltage will be generated. The change could be produced by changing the
magnetic field strength, moving a magnet toward or away from the coil,
moving the coil into or out of the magnetic field, rotating the coil relative to the
magnet, etc.
Faraday's law is a fundamental relationship which comes from Maxwell's
equations. It serves as a succinct summary of the ways a voltage (or emf)
may be generated by a changing magnetic environment. The induced emf in
a coil is equal to the negative of the rate of change of magnetic flux times the
number of turns in the coil. It involves the interaction of charge with magnetic
field.
5.0
Lenz's Law
www.youtube.com/embed/1-aoGz5X_j0
www.youtube.com/embed/ZMAd9DrnNGY
www.youtube.com/embed/Vs3afgStVy4
Charlie Chong/ Fion Zhang
YouTube
,
6.0
Inductance
Inductance
www.youtube.com/embed/NgwXkUt3XxQ
www.youtube.com/embed/X2e9x104AnE
www.youtube.com/embed/4PvOFovZQpQ
Charlie Chong/ Fion Zhang
7.0
Impedance
where I and V are the rms or "effective" values. The quantity Z is called
impedance. For a pure resistor, Z = R. Because the phase affects the
impedance and because the contributions of capacitors and inductors differ in
phase from resistive components by 90 degrees, a process like vector
addition (phasors) is used to develop expressions for impedance. More
general is the complex impedance method.
Impedance Combinations
http://hyperphysics.phy-astr.gsu.edu/hbase/electric/imped.html#c4
Impedance
www.youtube.com/embed/Pj4Rq1ZIeDI
www.youtube.com/embed/FEERuJlwBxE
www.youtube.com/watch?v=xyMH8wKK-Ag
www.youtube.com/embed/y1ES6WrALzI
Good Luck!
Good Luck!