Sei sulla pagina 1di 4

Attribute and hierarchy change run : If you change master data (navigation attri

butes) or hierarchies of a characteristic that is contained in aggregates, you m


ust adjust these aggregates. This ensures that queries that access the InfoCube
or assigned aggregates are consistent. Unlike in the aggregates, no data that re
fers to navigation attributes or hierarchies is stored in the InfoCube. The mast
er data or the hierarchy tables are joined with the tables of the cube when the
query is executed.Regardless of whether or not aggregates exist, the system does
not automatically transfer master data record changes, rather you must activate
this master data explicitly. If aggregates are involved, you must adjust them u
sing the change run before you can 'release' the data record changes (the corres
ponding InfoObjects or hierarchies are registered for the next change run: Trans
action RSA1 -> Tools -> Apply Hierarchy/Attribute Change -> InfoObject List or H
ierarchy List).
Problem: In any SAP System only One attribute change run can run at one point of
time. i. e If one attribute change run is running in system from any process ch
ain or for any project and 2nd one fails, if start at same time due to locking p
roblem. Due to this entire data load fails.
Solutions:
1. Shift Change runs from info package level to global level and/or process chai
n level in order of priority. Means instead of keeping ACR after each infopackag
e update we can accumulate all in one ACR at end of Process Chain or in a separa
te chain, if this data is not dependent for next loads(means no look ups).
2. Increase CR_MAXWAIT time. CR_MAXWAIT is to create a delay for second attribut
e change run while the first attribute change run is running in the system.
At any single point in time, there can only be one CR in the startphase. Every o
ther CR will immediately fail when unsuccessfullytrying to acquires the startloc
k. No wait is done here.
Above option is helpfull When the running CR is in the workphase, only then will
a second CR enter the start phase and wait as long as specified in CR_MAXWAIT.A
nd when the second CR is in the startphase, all other CRs trying to start will a
gain immediately fail.
For more info @ SAP Note : Note 825927 - The BW Changerun: CR_MAXWAIT .so this i
s not 100% solution.
3. Created an ABAP Program and included before each Attribute Change Run in Proc
ess Chains. This Program checks if any ACR running in the system or not. If any
ACR is running it delays 10 Secs. Recursively it checks and delays 10 secs every
time. Program execution finishes only when there is not ACR running in the syst
em and allows next process(Attribute Change Run) to trigger in Process Chain. Af
ter implementation of this program no ACR failures in our system. Check the codi
ng at end of this blog in appendix.
How to implement:
Step1: Create an ABAP program(eg: ZRSDDS_CHANGERUN_MONITOR), coding available at
Appendix. create a variant aswell for no of sces neets to wait at max.
Step2. Include this ABAP program in Process Chains between infopackage and Attri
bute Change runs as shown in the screenshot.
step3: Goto Process Chain(TCode: RSPC) and choose perticular process chain, then
goto processes and choose ABAP program provide technical name and description.
Provide created ABAP program and Variant save and activate Process Chain.
Service Market place:
---------------------

S0005955430
352J83DA
S0008941444
kiewit123
Xerox Scan

- csc@123

7659030863
9912635135
AYOPB6939M
J2808836

- PAN
- Passport

EP2014CN662408
cschosting\yprasad
7AN_g_4@
9560410553

- Pooja

426010493
https://autoproxy.eu.csc.com/proxy.pac
https://proxyhyd.asia.csc.com/proxy.pac
--------------------------------------------http://proxyhyd.asia.csc.com/proxy.pac (NMG)
--------------------------------------------8008940813
Divya
8121796044
9704525376

Datacard Sim

pramoddubeys@yahoo.com
8519898249
8066465644
9866225221
8332023784

Pinni

Cisco
Sanjay
Srikant

748341(12345)
785086
785056

--------------------------------------------BW Server
Username
Pwd

yprasad
csc@123

--------------------------------------------https://portal.csc.com/profilemanager

744400
741372
746701
745700
741397

Admin
B7 Security
Transport HelpDesk
NMG
Umakanth Bandaru(Transport)

17.499221,78.40822

GEOCODES

flat no 95, Door No 205, pavan nivas, navodaya colony,opposite to HUDA park, ku
katpally - 500072, Hyderabad.
-------------------------------------------CSC Pasword Security Quest - answers
1.Bangalore
2.Hyderabad
3.Nandini
4.Science and Maths
5.Sister-In-Law
-------------------------------------------http://20.198.69.6/scan/index.php
F153707642
http://www.watchlivestreaming.net/live-cricket.html
http://www.google.com/jobs/application/application?loc=in&action=add&job=Softwar
e Engineer in Test - Hyderabad&source=naukri
cscbpcsdc001.consult.csc.com
------------------------------------------------Certificate

Sathya@12

:
:

CSC_SINTI
sairam123

Hoshanco:--------UserName
Password

-----------------------------------------------11095757446
ZPRASHU_MODULE_POOL
http://www.sdn.sap.com/irj/scn/index?rid=/media/uuid/c766e918-0b01-0010-99b1-c2b
78cd059b3&overridelayout=true
https://wiki.sdn.sap.com/wiki/display/WDABAP/eLearning+Tutorials+-+Floorplan+Man
ager+for+Web+Dynpro+ABAP
9962914575

Latha(chennai)

Plot no 5, Krishna nagar, Mudichoor main road. west tambaram


[10:45:05 PM] suchi bhanu: chennai
from mepz you will pick the padappai bus which is passing thru krishna nagar

[11:13:08 PM] suchi bhanu: from krishna nagar, i will receive you by walk

Potrebbero piacerti anche