Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
01/10/13 Added symbols and models for the LT6236 and LT6237.
01/10/13 Revised the models of the LT6230, LT6230-10, and LT6231.
01/10/13 Trapped a crash mode relating to expanding hierarchical schematic block
s with zero components.
01/08/13 Trapped a potential divide by zero in the symbol editor.
01/08/13 Revised the model of the LTC3787 and LTC3788.
01/04/13 Revised the model of the LTC3855.
01/04/13 Added a symbol and model for the LTC2925.
01/04/13 Fixed an issue drawing some global nodes when interfacing with in-house
tools.
01/03/13 Fixed an error in transistor database queries regarding polarity.
01/03/13 Fixed an error in the automatic symbol attribute text placement algorit
hm.
01/02/13 Improved the rendering of the symbol preview in the Select Component Sy
mbol dialog.
12/21/12 Added a symbol and model for the LT8705.
12/21/12 Added a symbol and model for the LT6016.
12/21/12 Revised the model of the LTC3115-1.
12/19/12 Trapped a crash mode regarding long string value symbol attributes.
12/19/12 Revised the models of the LTC1992, LTC1992-1, LTC1992-2, LTC1992-5, LTC
1992-10.
12/19/12 Revised the model of the LT1630.
12/19/12 Added symbols and models for the LTC4353 and LTC4370.
12/18/12 Revised the models of the LT8300.
12/18/12 Revised the models of the LT3755 and LT3755-1.
12/17/12 Revised the models of the LTC4364-1 and LTC4364-1.
12/17/12 Revised the model of the LT3955.
12/17/12 Revised the model of the LTC3787.
12/17/12 Revised the models of the LT3791 and LT3791-1.
12/17/12 Corrected one of the syntax hints in the simulation command editor.
12/17/12 Added a symbol and model for the LTC3245.
12/12/12 Added a symbol and model for the LTC6090.
12/11/12 Revised the model of the LT1394.
12/11/12 Corrected the way some global net flags were rendered on the schematic.
12/11/12 Improved the symbol attribute auto arrangement algorithm.
12/07/12 Revised the model for the LT3508.
12/07/12 Improved the speed of some parsing operations.
12/06/12 Revised the models of the LTC3788 and LTC3788-1.
12/06/12 Revised the model of the LTC3786.
12/06/12 Revised the model of the LTC3859.
12/06/12 Improved subcircuit expansion for subcircuit with many hundreds of port
s.
12/05/12 Revised the model of the LT1632.
12/05/12 Revised the model of the LTC1255.
12/05/12 Added a symbol and model for the LT3763.
12/05/12 Revised the model of the LTC3864.
11/30/12 Revised the model of the LTC6409.
11/30/12 Revised the model of the LT1010.
11/30/12 Added a symbols and models for the LTM8061-4.1, LTM8061-4.2, LTM8061-8.
2, and LTM8061-8.4.
11/30/12 Added a symbol and model for the LTC3890-3.
11/30/12 Revised the model of the LTC3626.
11/30/12 Revised the model of the LT3761.
11/27/12 Revised the model of the LT3973.
11/27/12 Revised the model of the LT3761.
11/27/12 Revised the jig circuits for the LT1129 series.
11/27/12 Added a check for positive definite Td for the ideal tranmission line i
n a transient analysis.
11/16/12 Revised the models of the LTC6247, LTC6247, and LTC6248.
11/16/12 Added a symbol and model for the LTC3890-2.
11/16/12 Removed the comment about port type visibility from the net name editor
since the limitation no longer applies.
11/14/12 Added a symbol and model of the LTC3864.
11/14/12 Revised the models of the LT1761-1.2, LT1761-1.5, LT1761-1.8, LT1761-2.
5, LT1761-2.8, LT1761-2, LT1761-3.3, LT1761-3, LT1761-5, LT1761-BYP, and LT1761SD
11/14/12 Revised the model of the LTC6101.
11/14/12 Corrected an error in one of the behavioral expression compilers in the
alternate solver.
11/09/12 Removed the reference probe when reopening the same schematic as a diff
erent instance of the overall hierarchy.
11/09/12 Improved the responsiveness of the UI during redraws of lengthy MC runs
.
11/06/12 Added symbols and models for the LTC4364-1 and LTC4364-2.
11/06/12 Revised the model of the LTM4641.
11/06/12 Revised the models of the LTC3527 and LTC3527-1.
11/06/12 Revised the model of the LT3761.
11/01/12 Revised the model of the LT6210.
11/01/12 Revised the model of the LT6105.
10/29/12 Revised the models of the LTC6252, LTC6253, and LTC6254.
10/29/12 Revised the models of the LT3692A, LT3761, LT3955, and LT3992.
10/22/12 Alt-left-clicking on a plot label now highlights that device or trace i
n the schematic.
10/22/12 Added a symbol and model for the LT3955.
10/18/12 Added symbols and models for the LTC3633A, LTC3633A-1, LTC3633A-2, and
LTC3633A-3.
10/17/12 Added TVS to the types of recognized diodes in the schematic GUI.
10/17/12 Revised the models for the LTC3786 and LTC3787.
10/16/12 Added a symbol and model for the LTC4359.
10/16/12 Added a symbol and model for the LT3761.
10/16/12 Revised the model of the LT8300.
10/15/12 Improved the graphical editing of .op data labels.
10/15/12 Improved the rendering of .op data labels.
10/15/12 Improved the rendering of node labels.
10/15/12 Trapped a crash mode in .dc analysis.
10/09/12 Revised the models of the LTM4608 and LTM4616.
10/09/12 Trapped a crash mode relating to specifying UIC.
10/09/12 Trapped a crash mode due to libc on XP.
10/08/12 Revised the model of the LT3959.
10/08/12 Dramatically reduced the stack space requirements for some types of cir
cuits.
10/04/12 Added a symbol and model for the LT3959.
10/03/12 Added a symbol and model for the LT8300.
10/03/12 Added a model for the FDB3682 MOSFET.
10/01/12 Corrected an error writing component instance attributes that weren't s
upposed to veto symbol attributes.
09/28/12 Revised the model of the LT3844.
09/27/12 Revised the model of the LTC3891.
09/26/12 Revised the model of the LT1505 and LT1505-1.
09/25/12 Revised the model of the LTC3536.
09/25/12 Revised the model of the LT3956.
09/25/12 Revised the models of the LTC3765 and LTC3766.
09/21/12 Corrected one of the noise equations for MOS1/2/3.
09/21/12 Added a symbol and model for the LTC3861-1.
09/21/12 Revised the models of the LTC3860 and LTC3861.
09/21/12 Added a symbol and model for the LTC3026-1.
09/20/12 Revised the model of the LTC3536.
09/19/12 Added symbols and models for the LT1634-1.25, LT1634-2.5, LT1634-4.096,
and LT1634-5.
09/19/12 Revised the models of the LTC3405 and LTC3405A.
09/18/12 Corrected an error in computing the forward and reverse early voltage
09/18/12 Added a symbol and model for the LT4363-1.
09/18/12 Revised the model of the LT4363-2.
09/18/12 Fixed a problem parsing .meas statements.
09/17/12 Revised the models of the LTC3721-1, LTC3723-1, LTC3723-2.
09/17/12 Revised the model of the LTC3891.
09/17/12 Revised the model of the LT3652.
09/17/12 Added a symbol and model for the LTC3122.
09/17/12 Added a symbol and model for the LT3791-1.
09/17/12 Added a symbol and model for the LTC6905.
09/17/12 Revised the models of the LT6230 and LT6230-10.
09/17/12 Revised the model of the LT1028.
09/17/12 Revised the models of the LT6200, LT6200-5, LT6200-10, LT6201, LT6233,
and LT6234.
09/14/12 Revised the models of the LT3008, LT3008-1.2, LT3008-1.5, LT3008-1.8, L
T3008-2.5, LT3008-3.3, LT3008-5, LT3009, LT3009-1.2, LT3009-1.5, LT3009-1.8, LT3
009-2.5, LT3009-3.3, and LT3009-5.
09/14/12 In the diode, MOSFET, bipolar, or JFET selection dialog, Ctrl-C will no
paste the model statement onto the ASCII clipboard.
09/10/12 Revised the models of the LT3640 and LT3641.
09/10/12 Revised the model of the LTM8029.
09/10/12 Revised the model of the LT3957A.
09/07/12 Added models for the Si2318CDS and RJK0451DPB MOSFETs.
09/07/12 Revised the models of the LT3975 and LT3976.
09/04/12 Revised the model of the LTC3113.
09/04/12 Improved the speed of some netlisting operations.
09/04/12 Fixed an problem reading some ASCII files.
09/04/12 Revised the model of the LTC3112.
08/30/12 Revised the models of the LTC3388-1 and LTC3388-3.
08/30/12 Revised the model of the LTC3115-1.
08/30/12 Added symbols and models for the LT3975 and LT3976.
08/30/12 Revised the models of the LT8610 and LT8611.
08/30/12 Revised the symbol of the 1210.
08/22/12 Revised the models of the LT1169, LT1462, LT6003, LT6011, LTC6081, LTC6
082, LTC6084, LTC6085, LTC6087, LTC6088, and LTC6241.
08/22/12 Revised the model of the LT1011.
08/22/12 Revised the model of the LT1711.
08/22/12 Revised the model of the LTC6078.
08/22/12 Revised the model of the LT1464 and LT1465.
08/21/12 Trapped a crash mode relating to restarting a simulation during a wavef
orm data redraw
08/20/12 Revised the model of the LTC6102.
08/20/12 Added a symbol and model for the LTC3626.
08/20/12 Revised the model of the LT3992.
08/20/12 Revised the model of the LTC6103.
08/10/12 Added symbols for the LTC6240 and LTC6242.
08/04/12 Revised the model of the LTM4606.
08/04/12 Added a symbol and model for the LT3460-1.
07/28/12 Circumvented a Win32 bug regarding stat()'ing files.
07/28/12 Revised the model for the LTC3105.
07/28/12 Revised the model for the LTC3115-1.
07/28/12 Corrected a typo in the help file.
07/28/12 Revised the model for the LTC3630.
07/28/12 Added a symbol and model for the LTC3605A.
07/28/12 Revised the symbol for the LTC3605.
07/12/12 Added symbols and models for the LTC1068, LTC1068-25, LTC1068-50, and L
TC1068-200.
07/11/12 Revised the models of the LT3012 and LT3012B.
07/10/12 Revised the model of the LT3480.
07/02/12 Revised the models of the LTC3860 and LTC3861.
04/11/12 Revised the models of the LTC1992, LTC1992-1, LTC1992-2, LTC1992-5, and
LTC1992-10.
04/10/12 Revised the model of the LTC3600.
04/09/12 Added a symbol and model for the LT3791.
04/09/12 Added a symbol and model for the LT3988.
04/09/12 Revised the models for the LT6557 and LT6558.
04/05/12 Revised the model for the LT6554.
04/05/12 Revised the models for the LT6552 and LT6553.
04/05/12 Revised the models for the LT4356-1, LT4356-2, and LT4356-3.
04/05/12 On exiting LTspice, the help file window is now closed as is also is be
fore a Sync Release to free up file perimssions.
04/05/12 xchm is no longer invoked to read the help file when running under Linu
x.
04/05/12 Revised the help file.
03/28/12 Removed the word "solely" from the License file.
03/28/12 Revised the models for the LTM8022, LTM8023, LTM8025, LTM8031, LTM8032,
LTM8033.
03/22/12 Added a symbol and model for the LT1567.
03/22/12 Added a symbols and models for the LTC6601-1, LTC6601-2, LTC6605-7, LTC
6605-10, and LTC6605-14.
03/22/12 Revised the models for the LT3014 and LT3014B.
03/21/12 Added a symbol and model for the LT8611.
03/21/12 Culled some redraws of waveform views.
03/20/12 Revised the models for the LT4356-1, LT4356-2, and LT4356-3.
03/20/12 Revised the model for the LT3641.
03/20/12 Revised the model for the LTM8025.
03/19/12 Added symbols and models for the LT1118, LT1118-2.5, LT1118-2.85, and L
T1118-5.
03/19/12 Added a symbol and model for the LT8610.
03/19/12 Revised the model for the LTC6241.
03/19/12 The line style for waveform and schematic annotations now defaults to a
dotted line.
03/19/12 Alleviated a bug in Windows 7 that causes a redraw during lengthy redra
ws.
03/19/12 Trapped a crash mode that could occur in loading corrupted waveform fil
es.
03/19/12 The Visible traces menu command is now disabled if the waveform file si
ze is zero.
03/15/12 Revised the model for the LTC3866.
03/14/12 Added a symbol and model for the LT3108-1.
03/08/12 Added symbols and models for the LT1085-3.3, LT1085-3.6, LT1085-5, and
LT1085-12.
03/08/12 Added symbols and models for the LT1084-3.3, LT1084-5, and LT1084-12.
03/08/12 Added symbols and models for the LT1083-5 and LT1083-12.
03/08/12 Removed some blank icons from dialogs.
03/08/12 Revised the model for the LTC6078.
03/08/12 Added symbols and models for the LT1175 and LT1175-5.
03/08/12 Trapped a crash mode regarding diodes with m=0.
03/08/12 Added a symbol and model for the LT3973.
03/08/12 Revised the model for the LTC2052.
03/08/12 Added a symbol and revised the model for the LTC2050HV.
03/08/12 Revised the model for the LTC2054.
03/07/12 Revised the model for the LTC2050 and LTC2051.
03/07/12 Revised the model for the LTC1250.
03/06/12 Fixed a error in one of the alternate solver compiler's stack frame obj
ect code generation.
03/06/12 Added a symbol and model for the LT3692A.
03/06/12 Added a symbol and model for the LT1185.
03/05/12 Revised the model for the LTC1152.
03/05/12 Added symbols and models for the LT1117, LT1117-2.85, LT1117-3.3, and L
T1117-5.
03/01/12 Revised the model for the LTC3588-1.
03/01/12 Revised the model for the LTC1150 and LTC1151.
03/01/12 Added a symbol and model for the LTC3861.
03/01/12 Revised the model for the LTC3860.
03/01/12 Revised the models for the LT1241, LT1242, LT1243, LT1244, and LT1245.
03/01/12 Revised the model for the LTC3765.
03/01/12 Revised the model for the LTC3766.
02/29/12 Revised the model for the LTC1100.
02/28/12 Revised the models for the LT1021-5 and LT1021-10.
02/28/12 Revised the model for the LT1021-7.
02/28/12 Revised the model for the LT1009.
02/27/12 Added symbols and models for the LT3008-1.2, LT3008-1.5, LT3008-1.8, LT
3008-2.5, LT3008-3.3, and LT3008-5.
02/27/12 Added symbols and models for the LT1236-5 and LT1236-10.
02/27/12 Revised the models for the LTC1052 and LTC1053.
02/27/12 Revised the model for the LT6650.
02/27/12 Revised the model for the LT3580.
02/24/12 Revised the model for the LT1738.
02/24/12 Revised the model for the LTC3859.
02/24/12 Corrected a typo in the help file.
02/24/12 Revised the model for the LT6411.
02/24/12 Revised the model for the LTC1047.
02/24/12 Revised the model for the LTC1049.
02/24/12 Revised the models for the LTC1050 and LTC1050A.
02/24/12 Revised the model for the LTC1051.
02/24/12 Added a symbol and model for the LT3798.
02/24/12 Added symbols and models for the LT3650-8.2 and LT3650-8.4.
02/24/12 Revised the models for the LT3650-4.1 and LT3650-4.2.
02/16/12 Added symbols and models for the LTC4252C-1 and LTC4252C-2.
02/16/12 Revised the model for the LT1161.
02/15/12 Revised the models for the LTC6401-8, LTC6401-20, and LTC6401-26.
02/15/12 Added a symbol and model for the LTC6401-14.
02/15/12 Revised the model for the LT1639.
02/15/12 Revised the model for the LT1631.
02/15/12 The fast access convert menu command disable state is kept better up-to
-date with the file format.
02/14/12 Added symbols and models of the LTC6400-8 and LTC6400-14.
02/14/12 Revised the models of the LTC6400-20 and LTC6400-26.
02/14/12 Corrected a typo in the help file.
02/13/12 Added a symbol and model for the LTC3600.
02/13/12 Revised the models of the LTC3857, LTC3857-1, LTC3890, and the LTC38901.
02/13/12 Revised the models of the LT1424-5 and LT1424-9.
02/10/12 Shift key + Cascade toolbar icon now opens iconized windows before disp
laying in cascade.
02/09/12 Revised the model for the LT1206 and LT1210.
02/09/12 Revised the models for the LTC3838 and LTC3839.
02/08/12 Improved the operation of the ideal diode in .AC analysis in some limit
cases.
02/08/12 Added a symbol and model for the LTC3866.
02/08/12 Revised the models of the LTC3868 and LTC3868-1.
02/08/12 Revised the model of the LTC3855.
02/06/12 Modified the select component dialog symbol name spell checker.
02/06/12 Made .measure statements a little forgiving of syntax errors.
02/03/12 Added a symbol and model for the LTC3115-1.
02/03/12 Revised the model of the LT1398.
02/03/12 Revised the models of the LT3751, LTC3765, LTC3766, and LTC3833.
02/03/12 Revised the models of the LTC1541 and LTC1542.
02/03/12 Added symbols and models for the LTC4366-1 and LTC4366-2.
02/02/12 Revised the models of the LT1217, LT1223, LT1227, LT1229, LT1230, LT125
9, LT1395, LT1396, LT1397, and the LT1497.
02/01/12 Added a symbol and model for the LT3641.
01/31/12 Revised the model for the LTC1540.
01/30/12 Revised the model for the LTC3709.
01/30/12 Revised the model for the LTC3833.
01/30/12 Revised the models for the LTC1443, LTC1444, and the LTC1445.
01/27/12 Revised the model for the LTC6406.
01/27/12 Revised the models for the LT6600-10, LT6600-2.5, LT6600-20, and LT6600
-5.
01/27/12 Added symbols and models for the for the LT6600-15 and LT6600-5.
01/27/12 Revised the symbol and model for the LTC6405.
01/27/12 Added a symbol and model for the LTC1693-5.
01/27/12 Revised the models for the LTC1693-1, LTC1693-2, and LTC1693-3
01/27/12 Revised the model for the LTC3838.
01/27/12 Revised the models for the LTC3726, LTC6908-1, and LTC6908-2.
01/23/12 Revised the symbol and model for the LTC3415.
01/23/12 Revised the model for the LTC3640.
01/23/12 Revised the model for the LTC3891
01/23/12 Revised the models for the LTC6403-1, LTC6404-1, LTC6404-2, and LTC6404
-4.
01/23/12 Revised the model for the LTC3103.
01/16/12 Revised the model for the LTC6088.
01/16/12 Revised the models for the LT1719, LTC6087, LT1017, LT1018, LT1713, LT1
716 and LT1720.
01/16/12 Revised the models for the LTC3765 and LTC3766.
01/11/12 Added a symbol and model for the LTC4232.
01/11/12 Revised the model for the LT3741.
01/11/12 Revised the model for the LT3581.
01/11/12 Revised the model for the LT3508.
01/11/12 Improved memory utilization for JFET's and MESFET's.
01/11/12 Removed a discontinuity in the MESFET device.
01/11/12 Improved cache utilization for JFET devices.
01/11/12 Revised the ferrite bead library(graciously supplied by Wrth Elektronik)
.
01/05/12 Adjusted the cache strategy of the alternate solver.
01/04/12 Removed the gmin contribution to BJT substrate current if no other cond
uction mechanism exists.
01/04/12 Revised the model for the LTC3112.
01/03/12 Revised the model for the LTC3838.
12/23/11 Added a symbol and model for the LTC3839.
12/22/11 Revised the models for the LTC3113, LT3511, and LT3512.
12/22/11 Revised the models for the LTM8047, LTM8048, LT3573, LT3574, and LT3575
.
12/21/11 Revised the model for the LTC3766.
12/21/11 Revised the models for the LTC1440, LTC1441, and LTC1442.
12/21/11 Removed some code used the eke the last possible simulation speed out o
f single threaded machines in the interest of optimizing the speed on multi-thre
ading hardware.
12/21/11 Revised the models for the LTC3601 and LTC3633.
12/19/11 TRBM1 and TRBM1 are now accepted for BJT model parameters TRM1 and TRM2
.
12/19/11 Implemented BJT model parameters TVAR1 and TVAR2.
12/19/11 Implemented BJT model parameters TVAF1 and TVAF2.
12/19/11 The LTspice-Gummel-Poon now supports a parasitic PNP to accurately mode
l the substrate behavior of a vertical NPN. The PNP is defined by model paramet
ers p_is, p_bf, p_nf, p_vaf, p_ikf, p_tikf1, p_tikf2, p_isc, p_nc, p_xtb, p_eg,
p_xti, and p_renode.
12/19/11 The noise from substrate current in monolithic BJT's is now computed.
12/16/11 Revised the model for the LT3759.
.
06/21/10 Revised the LTC3615 model.
06/21/10 Revised the LTC3580 model.
06/16/10 Revised the LT3751 model.
06/16/10 Added a symbol and model for the LTC6990.
06/16/10 Added a symbol and model for the LTC6991.
06/16/10 Added symbols and models for the LTC6992-1, LTC6992-2, LTC6992-3, and t
he LTC6992-4.
06/16/10 Fixed a problem related to autoranging parametric plots.
06/11/10 Revised the LTC3225 and LTC3225-1 models.
06/11/10 Added a symbol and model for the LTC3829.
06/11/10 Added a symbol and model for the LTC3108.
06/07/10 Revised the LT3492 symbol.
06/04/10 Revised the LTC3602 model.
06/04/10 Corrected an error in library search path.
06/04/10 Revised the LTC3588-1 model.
06/04/10 Revised the LTC3412 and LTC3412A models.
06/03/10 Revised the LT3082 model.
06/03/10 Added a symbol and model for the LTC3856.
06/03/10 Trapped a user error in .four statements.
05/27/10 Revised the LT3751 model.
05/27/10 Fixed a problem integrating capacitors specified by dimensions instead
of capacitance.
05/26/10 Added symbols and models for the LT3579 and LT3579-1.
05/25/10 Added a symbol and model for the LTC3521.
05/25/10 Improved netlist printing output.
05/21/10 LTspice is now more tolerant of incorrect PULSE parameters.
05/21/10 In the netlist editor, Left/Right arrows keys now move to the end of th
e selected text if appropriate.
05/21/10 Added symbols and models for the LTC3526L and LTC3526LB.
05/21/10 Added a symbol and model for the LTC3615.
05/21/10 Revised the LT3844 model.
05/21/10 Right clicking now moves the text cursor to the mouse cursor position i
f nothing is selected in the netlist viewers.
05/19/10 Added a symbol and model for the LT1761-1.2.
05/14/10 Revised the LT3751 model.
05/14/10 Added a symbol and model for the LTM4608A.
05/14/10 Added a symbol and model for the LT8415.
05/14/10 Added a symbol and model for the LT3581.
05/14/10 Added a symbol and model for the LT3760.
05/14/10 Added a symbol and model for the LT3754.
05/13/10 Revised the LTM8031 model.
05/13/10 Revised the LTC3722-1 model.
05/13/10 Added a symbols and models for the LT3663, LT3663-3.3, and LT3663-5.
05/12/10 Added a symbol and model for the LT3492.
05/12/10 Improved memory management of expressions passed to subcircuits.
05/11/10 Added a symbols and models for the LT3519, LT3519-1, and LT3519-2.
05/11/10 Improved the documentation of some symbol attributes when LTspice is us
ed interfaced with in-house tools.
05/11/10 Revised the LTC3722-1 and LTC3722-2 models.
05/11/10 Revised the LTC3588-1 model.
05/10/10 Added a symbols and models for the LT3695, LT3695-3.3 and LT3695-5.
05/07/10 Added a symbol and model for the LTC3860.
05/07/10 If a simulation is aborted by the user, Fourier and fast access command
s are skipped.
05/06/10 Added a symbol and model for the LT3686.
05/04/10 Improved one of the error messages.
05/04/10 Improved the operation of the color palette editor.
05/03/10 Revised the LTC3722-1 and LTC3722-2 models.
05/03/10 Worked around a bug in some video card drivers that affected schematic
editing.
05/03/10 Revised the LTC2954-1 and LTC2954-2 models.
05/03/10 Fixed a problem in the monolithic mosfet editor.
04/30/10 Added a symbol and model for the LTC3588-1.
04/29/10 Revised the LTC4215 model.
04/28/10 Added a symbol and model for the LT3970.
04/28/10 Corrected an error in the attribute compiler used with in-house tools.
04/27/10 Improved .nodeset operation.
04/27/10 Revised the LT3494 model.
04/26/10 "scale" is now a synonym for the resistance in a resistor's .model stat
ement.
04/26/10 Added a symbol and model for the LTM8032.
04/26/10 Revised the LTC3722-1 and LTC3722-2 models.
04/26/10 Added a symbol and model for the LTM8031.
04/26/10 Extended the homotopic methods used in the source stepping algorithms.
04/22/10 Implemented Rsercshunt, the ESR of the capacitance of .option cshunt=..
.
04/22/10 Modified the method used to integrate cshunt capacitances.
04/20/10 Corrected an optimizing error in three of the expression compilers.
04/15/10 Worked around a rare bug in some video card drivers that couldn't XOR a
cursor against a black background color.
04/15/10 Revised the LTC3813 model.
04/15/10 Revised the LT3751 model.
04/09/10 Added a symbol and model for the LTC3859.
04/08/10 Fixed an error in one of the ASCII data file formats.
04/08/10 Inappropriate group delay plotting is now disabled.
04/07/10 Added a symbol and model for the LT3574.
04/07/10 Holding down the shift or control key while tiling the windows adjusts
now tries new tiling order arraignments.
04/07/10 Revised the LT4356-1, LT4356-2, and LT4356-3 models
04/07/10 Added a symbol and model for the LTC3616.
04/07/10 Added a symbol and model for the LTC3614.
04/07/10 Revised the LT3751 model.
04/07/10 Revised the LT3980 model.
04/05/10 Implemented diode parameters perim, isw, ns, rsw, cjsw, vjsw, mjsw, and
fcs.
04/05/10 Revised the LT3580 model.
04/01/10 Revised the LTM8025 symbol and model.
04/01/10 Revised the LT1528 model.
03/29/10 Implemented BSIM3 parameter dtoxcv.
03/29/10 Added a symbol and model for the LT3751.
03/25/10 Revised the LTC6246 model.
03/25/10 Added a symbol and model for the LT3741.
03/24/10 More error conditions are suppressed from throwing up a dialog when run
ning in batch mode.
03/22/10 Added a symbol and model for the LTM4627.
03/22/10 Added a symbol and model for the LTM4618.
03/22/10 Implemented a level 504 bipolar device.
03/16/10 Revised the LTC3865, LTC3865-1, LTC3601, LTC3604, and LTC3633 models.
03/16/10 Parenthesis characters are now trapped from being put in an instance na
me at the schematic level.
03/16/10 Adjusted the mouse wheel schematic zoom acceleration to be independent
of graphic card redraw time.
03/16/10 Added support for the i7-980x.
03/16/10 Added a symbol and model for the LTM4611.
03/16/10 Added a symbol and model for the LTM4610.
03/11/10 Revised the LTC4357 model.
03/11/10 Added a symbol and model for the LT4180.
03/08/10 Fixed a problem selected displayed steps of expressions.
03/08/10 Revised the LTC3855 model.
03/08/10 Added symbols and models for the LTC6087, LTC6088, LTC6246, LTC6247, LT
C6248, and LT6350.
03/04/10 Revised the LTC3811 model.
03/04/10 Added a symbol and model for the LTC3633.
03/04/10 Revised the LTC3601 and LTC3604 models.
03/04/10 Revised the LTM8027 model.
03/04/10 Revised the LTC3810 and LTC3810-5 models.
03/04/10 Revised the LTC3857 model.
03/04/10 Added symbols and models for the LTC3865 and LTC3865-1.
02/22/10 Revised the LT1784 model.
02/18/10 Corrected an error in the help file.
02/17/10 It is no longer necessary to type Ctrl-C when pasting between schematic
s.
02/16/10 Revised the LTC3811 model.
02/16/10 Revised the LTC3419 model.
02/16/10 Added a symbol and model for the LTC3604.
02/16/10 Added a symbol and model for the LTM8027.
02/16/10 Added a symbol and model for the LTM8025.
02/10/10 Extended the operation of the component database sort feature.
02/09/10 Trapped a syntax error regarding parsing the ternary operator.
02/09/10 Added symbols and models for the LT3971 and LT3991.
02/09/10 Revised the LTC3602 and LTC3603 models.
02/09/10 Revised the LTC3788 and LTC3788-1 models.
02/05/10 Improved the format of the expanded netlist.
02/04/10 Trapped a condition where synchronized plot planes could become unlocke
d.
02/04/10 It's now possible to reverse the sense of the mouse wheel schematic zoo
ming in the control panel.
02/04/10 Schematic mouse wheel scrolling now acts more like Google Maps instead
of Google Earth.
02/03/10 The .lib/.inc editor can now open files specified via URL.
02/03/10 When editing or viewing netlists, the context menu now lets you open li
brary files mentioned in .inc or .lib directives.
02/03/10 ASCII files opened from the schematic no longer colorize the first line
as a comment.
02/01/10 Revised the LTC3788 and LTC3788-1 models.
02/01/10 Revised the model for the LT3743 model.
01/28/10 Added a symbol and model for the LT2940.
01/28/09 Revised the LTM4601 and LTM4601-1 models.
01/26/10 Fixed a problem using the KSPICE devices in subcircuits.
01/26/10 Revised the LTC3723-1 model.
01/25/10 Revised the LTC3743 model.
01/25/10 Revised the LTC3855 model.
01/22/10 LTspice now profiles the installed graphics card's GPU and circumvents
it when LTspice's own graphics routines are faster.
01/21/10 Improved the rendering of some types of plot data.
01/20/10 Trapped some waveform read errors.
01/20/10 Revised the model for the LT3743.
01/14/10 Revised the model for the LT3980.
01/14/10 Added symbols and models for the LTC3788 and LTC3788-1.
01/12/10 Corrected an error in computing the impulse response from a frequency d
omain data.
01/12/10 Revised the model for the LTC4215.
01/12/10 Revised the model for the LTC3850.
01/11/10 Added a large number of power MOSFET models graciously supplied by Infi
neon.
01/11/10 Horizontal log axis ticks are now more conventionally placed.
01/11/10 Internal SPICE errors 51 and 114 are now decoded by the UI.
01/11/10 The FFT dialog now supports quadratic interpolation of waveform data be
fore doing the FFT if the underlying waveform data is uncompressed.
07/22/09 Added symbols and models for the LTC3868 and LTC3868-1.
07/22/09 Added symbols and models for the LTC3858 and LTC3858-1.
07/22/09 Revised the LTC3857 and LTC3857-1 models.
07/22/09 Added symbols and models for the LTC2913-1 and LTC2913-2.
07/22/09 Revised the LTC3722-1 and LTC3722-2 models.
07/22/09 Revised the LTC3850 symbol and model.
07/22/09 Corrected a problem regarding level 2 MOSFET gamma.
07/17/09 Added a symbol and model for the LTC3857.
07/16/09 Sped up subcircuit expansion.
07/16/09 Trapped a crash mode regarding thread timing.
07/15/09 Added symbols and models for the LTC2914-1 and LTC2914-2.
07/15/09 Added warnings when using archaic MOS levels 1, 2, or 3 below reasonabl
e dimensions.
07/15/09 Re-implemented MOS levels 1, 2, and 3 to use the Yang-Chatterjee charge
model instead of the Meyer capacitance model.
07/15/09 Improved the accuracy of the computation of the Jacobian for MOS level
3.
07/14/09 Improved the implementation of AC current monitoring in levels 2 and 3
MOS devices.
07/14/09 Corrected a DC current monitoring error in the level 3 MOS device.
07/08/09 Revised the LTC3851 and LTC3851-1 models.
07/08/09 Added symbols and models for the LTC2900-1 and LTC2900-2.
07/07/09 Added a symbol and model for the LTC3612.
07/07/09 Improved BUS netlisting support in hierarchical designs.
07/07/09 Fixed a problem keeping window tab labels in sync with symbol file name
s.
07/07/09 Added a symbols for the LT3755-2 and LT3756-2.
07/07/09 Revised the LT3755, LT3756, LT3755-1, and LT3756-1 models.
07/02/09 Revised the LTC6908-1 and LTC6908-2 models.
07/02/09 Added a symbol and model for the LTC4269-1.
07/02/09 Added a symbol and model for the LTC4265.
07/02/09 Improved the verbosity of some subcircuit expansion syntax error messag
es.
07/02/09 Revised the LTM4607 and LTM4609 models.
07/01/09 Revised the LTC3780 model.
07/01/09 Revised the LTM4605 model.
06/30/09 Revised the LT6105 model.
06/30/09 Trapped a crash mode that could occur when sync'ing with multiple invoc
ations of LTspice running.
06/30/09 Net names can now be longer than 63 characters.
06/27/09 Added right click menu commands for generating an expanded netlist.
06/23/09 Added context menu command to use the LTspice parser solely for preproc
essing and subcircuit expansion.
06/23/09 Node "GND" is more uniformly accepted as a synonym for "0"
06/23/09 Revised the LTC3783 model.
06/23/09 Fixed a problem in the .lib/.lib editor.
06/22/09 Revised the LT3845 model.
06/18/09 Fixed an error in the PBC netlister.
06/16/09 Revised the LT3571 model.
06/12/09 Modified the interpretation of .noise data in some .meas operations.
06/12/09 Trapped a potential memory problem in the uninstall routine.
06/12/09 The automatic symbol generator now accepts subcircuit names with slashe
s.
06/11/09 Revised the LTC3785 and LTC3785-1 models.
06/11/09 Improved the rendering of some fonts in the ASCII netlist editor.
06/09/09 Fixed a problem in the waveform expression compilers.
06/05/09 Revised the LTC3785 and LTC3785-1 models.
06/04/09 Trapped a potential crash mode.
06/03/09 Revised the LT3585-0, LT3585-1, LT3585-2, and LT3585-3 models.
06/03/09 Improved the handling of the BSIM4 rgeomod parameter.
06/02/09 Added symbols and models for the LTC3850-1 and LTC3850-2.
06/02/09 Added a symbol and model for the LT3092.
06/02/09 The waveform viewer context menu zoom to fit restarts marching waveform
s like the main menu did when appropriate.
06/01/09 The linear capacitor edit dialog is now suppressed for arbitrary capaci
tors.
06/01/09 The automatic symbol generation routine more throughly parses the ASCII
.subckt before offering to make the symbol.
05/29/09 Added a symbol and model for the LT1995.
05/29/09 Added a symbol and model for the LTC3782A.
05/29/09 Revised the evaluation of bipolar transistors.
05/28/09 Added a symbol and model for the LTC3729L-6.
05/27/09 Added symbol and model for the LTC3561A.
05/27/09 Fixed a problem regarding PCB netlist export.
05/27/09 Added symbols and models for the LTM4614 and LTM4615.
05/26/09 Added examples of frequency response analysis to the examples/Education
al/FRA directory.
05/21/09 Added a symbol and model for the LTM4609.
05/21/09 Added a symbol and model for the LT3571.
05/21/09 Added a symbol and model for the LTC3542-1.
05/15/09 Added symbols for the LTM4601A-1, LTM4601A, LTM4601AHV, LTM4602HV, LTM4
603HV and LTM4604A.
05/15/09 Revised the LTM4603 model.
05/14/09 A symbol can now be automatically generated from an ASCII sub circuit.
05/14/09 Trapped a user error regarding lossy transmission lines.
05/13/09 Revised the LTC3836 model.
05/13/09 Added a symbol and model for the LTC4260.
05/13/09 Revised the LTC4215 model.
05/13/09 Added a symbol and model for the LTC3854.
05/13/09 Revised diode recombination current over temperature.
05/11/09 Added a symbol and model for the LTC3526L-2 and LTC3526LB-2.
05/11/09 Added a symbol and model for the LTC3632.
05/10/09 Added pseudo transient as a last resort to finding the operating point.
05/08/09 Fixed some errors regarding the m multiplier and .ac analysis
05/06/09 Improved the way the full grid is drawn on the waveform viewer.
05/05/09 Added a symbol and model for the LTC3528-1.
05/05/09 Revised the LTC3853 model.
05/04/09 Added a symbols and models for the LTC3631, LTC3631-3.3, and LTC3631-5.
05/04/09 Revised the LTC3642, LTC3642-3.3, and LTC3642-5 models.
05/04/09 Added a symbols and models for the LTC3631, LTC3631-3.3, and LTC3631-5.
05/04/09 Suppressed some superfluous error messages.
05/04/09 Added a symbol and model for the LTC3901.
05/03/09 Trapped the error condition of trying to integrate something besides a
noise density from a .noise analysis in the waveform viewer.
05/03/09 Added dialog to assist composing .lib and .inc SPICE directives on a sc
hematic.
05/01/09 Revised the LTC3708 and LTC3709 models.
05/01/09 Fixed a problem executing some menu items from inside a hierarchical na
vigation.
05/01/09 The information of a default plot settings file is now incorporated eve
n for data files with a single data trace.
05/01/09 Updated the help file.
04/29/09 Revised the LT1963, LT1963-1.5, LT1963-1.8, LT1963-2.5, LT1963-3.3 and
models.
04/28/09 Revised the LTC3546 model.
04/27/09 Default integration method always resets to mod trap on program startup
.
04/24/09 Unique names are now generated for .fft files when multiple .fft's are
created and opened from the same schematic.
04/23/09 Fixed some objectionable behavior of the Control Panel dialog.
08/18/08 Added a symbols and models for the LTC3523 and LTC3523-2.
08/18/08 Revised the LTC3602 model.
08/18/08 Revised the LTC3709 model.
08/18/08 Added a symbol and model for the LTC3225.
08/18/08 Added a symbol and model for the LTC3608.
08/18/08 Revised the LTM4608 and LTM4616 models.
08/18/08 Added a symbol and model for the LTC3212.
08/13/08 Revised the model for the LT1513.
08/13/08 Revised the model for the LT3507.
08/11/08 The netlist editor works a bit more like notepad wrt pasting new lines
of text.
08/10/08 The '*' wild card character longer matches ':' so that hierarchy depth
is easier to control in, e.g., .save commands.
08/04/08 Revised the LT6650 model.
07/29/08 Added a symbols and models for the LTC6403-1, LTC6405, and LTC6406.
07/29/08 Revised the LT4356-1 model.
07/29/08 Revised the LTC4261 model.
07/12/08 Revised LTC1628-PG and LTC3707 models.
07/07/08 Revised some bjt models and evaluation.
07/07/08 Revised the LTC4444 and LTC4444-5 models.
07/01/08 Revised the LTC3221, LTC3221-3.3, and LTC3221-5 models.
06/30/08 Modified the Newton iteration algorithm for the BJT's with Nc and Ne !=
1.
06/30/08 Corrected a problem with LPNP substrate conduction over temp with Ns !=
1.
06/26/08 The short-circuit protection algorithm of the LT3500 was implemented in
the model.
06/25/08 Revised the LTC3873 and LTC3873-5 models.
06/25/08 Revised the LT3496 model.
06/25/08 Revised the LT3782 model.
06/25/08 An empty schematic is now automatically closed if it was only used to o
pen a jig file from the symbol browser.
06/25/08 Revised the LT1939, LT1940, LT1941, LT3493-3, LT3493, LT3500, LT3501, L
T3503, LT3505, LT3506, LT3506A, LT3507, LT3508, LT3510, LTC3422, and LTC3425 mod
els.
06/25/08 Revised the LT3487 model.
06/24/08 Added a symbol and model for the LT3493-3.
06/23/08 Added a symbol and model for the LTC1871-1.
06/23/08 Added some LED models.
06/23/08 Added symbols and models for the LTC4443, LTC4443-1, and LTC4444-5.
06/23/08 Improved use of user-defined parameters when both a Laplace and non-lin
ear transfer functions are specified.
06/20/08 Added a symbol and model for the LTM4616.
06/20/08 Revised the LT3517 and LT3518 models.
06/20/08 Revised the LT3755, LT3755-1, LT3756, and LT3756-1 models.
06/20/08 Added a symbol and model for the LTC3706.
06/20/08 Added a symbol and model for the LTC4446.
06/20/08 Revised the LT3500 model.
06/19/08 Corrected an error in the LTC3850 model test fixture.
06/19/08 Revised the LTM4607 model.
06/19/08 Revised the LTM4605 model.
06/19/08 Revised the LTC3780 model.
06/18/08 Revised the LTC3421 model.
06/17/08 Revised the LTC3602 model.
06/17/08 Added a symbol and model for the LTC3802.
06/17/08 Added a symbol and model for the LTC3785.
06/17/08 Added some MOSFET models.
06/17/08 Improved printing of schematics that were zoomed to fit.
06/16/08 Revised the LTC4416 and LTC4416-1 symbols.
06/07/08 Removed some diagnostic code from the alternate solver that created a p
09/14/07 An error regarding plot annotations and multiple plot panes was correct
ed.
09/13/07 Added a symbol and model for the LTC4357.
09/13/07 Added a symbol and model for the LT3497.
09/12/07 Improved the choice of horizontal axis engineering metric multiplier us
ed after manual plot settings.
09/12/07 Corrected an error regarding subcircuit port current monitoring.
09/12/07 Differences measured by dragging the mouse cursor over the waveform win
dow are now readout with more significant figures when necessary.
09/11/07 Revised the LT3502 and LT3502A models.
09/06/07 Added a symbol and model for the LT3475-1.
09/06/07 Added a symbol and model for the LT3474-1.
09/06/07 Added a symbol and model for the LT3580.
09/05/07 Revised the LT3591 model.
09/05/07 Added a symbol and model for the LT3080.
09/04/07 Revised the LT3021 series of models.
09/04/07 Revised the LT1962 series of models.
08/31/07 A crash mode regarding invalid .stepped circuits is trapped.
08/30/07 Added noise to the ideal diode.
08/29/07 Cleaned up some graphics logic.
08/28/07 Changed XOR gates to participate in the .op solution.
08/28/07 Updated BSIM3 to version 3v3.3.0.
08/16/07 Corrected an error in the BSIM4 small signal AC model.
08/15/07 Trapped a crash mode regarding pasting text.
08/15/07 Corrected a terminal current monitoring error in BSIM4.
08/14/07 Trapped a crash mode regarding attached cursors.
08/14/07 Revised the LT3486 model.
08/10/07 Added a symbol and model for the LT3591.
08/10/07 Added a symbol and model for the LT3693.
08/10/07 Added a symbol and model for the LT3685.
08/10/07 Added a symbol and model for the LT3680.
08/09/07 Fixed a problem in the BSIM4 charge model.
08/08/07 Updated BSIM4 to version 4.6.1.
08/03/07 Added symbols and models for the LTC1727-2.5, LTC1727-5, LTC1728-1.8, L
TC1728-2.5, LTC1728-3.3, LTC1728-5.
08/03/07 Added a symbol and model for the LT3508.
08/02/07 Added symbols and models for the LTC3499B and LTC3499B.
08/02/07 Added a symbol and model for the LTC3453.
08/01/07 Added symbols and models for the LT3502 and LT3502A.
08/02/07 Added a symbol and model for the LTC1696.
08/02/07 Added a symbol and model for the LTC3549.
08/01/07 Added symbols and models for the LT1738 and LT1683.
07/31/07 Revised the LTC5505-1 and LTC5505-2 models.
07/31/07 Revised the help documentation.
07/31/07 Revised the LTC3835 and LTC3835-1 models.
07/31/07 Revised the LT3417 and LT3417A models.
07/31/07 Revised the LT1952 and LT1952-1 models.
07/31/07 Revised the LT1310 model.
07/31/07 Revised the LTM4601, LTM4601-1, LTM4603, and LTM4603-1 models.
07/30/07 Added a symbol and model for the LTC3425.
07/30/07 Revised the LTC3412A model.
07/30/07 Revised the LTC3412 model.
07/30/07 Revised the LTC3414 model.
07/30/07 Revised the LTC3413 model.
07/30/07 Revised the LTC3416 model.
07/30/07 Revised the LTC3561 model.
07/30/07 Revised the LTC3411 model.
07/30/07 Revised the LTC3415 model.
07/27/07 Revised the LTC3421 model.
07/25/07 Corrected a problem regarding subcircuit port current monitoring and le
02/06/07 The edit schematic annotation text dialog remembers its size between in
vocations.
02/06/07 The add data trace dialog remembers its size between invocations.
02/06/07 The netlist/error log dialog remembers its size between invocations.
02/06/07 The select waveforms dialog remembers its size between invocations.
02/06/07 The edit plotted expression dialog remembers its size between invocatio
ns.
02/06/07 The select steps dialog remembers its size between invocations.
02/06/07 The ferrite bead selection dialog remembers its size between invocation
s.
02/06/07 The inductor selection dialog remembers its size between invocations.
02/06/07 The resistor selection dialog remembers its size between invocations.
02/06/07 The MOSFET selection dialog remembers its size between invocations.
02/06/07 The JFET selection dialog remembers its size between invocations.
02/06/07 The diode selection dialog remembers its size between invocations.
02/06/07 The capacitor selection dialog remembers its size between invocations.
02/06/07 The bipolar transistor selection dialog remembers its size between invo
cations.
02/06/07 The symbol attribute editor remembers its size between invocations.
02/06/07 The symbol browser remembers its size between invocations.
02/06/07 The symbol Pin table dialog remembers its size between invocations.
02/06/07 The Component Attribute Editor dialog remembers its size between invoca
tions.
02/06/07 Corrected an error in the LT1720/LT1721 model.
02/05/07 Added a symbol and model for the LTC3805.
02/02/07 Fixed a problem using .step and fastaccess in the same data file.
02/02/07 Trapped a crash mode regarding unplotable data.
02/02/07 Added some diode and MOSFET models.
02/02/07 A macromodel's test fixture(jig) circuit can be opened from the dialog
seen after right clicking on an symbol instance..
02/02/07 Revised the LT3483 model.
02/01/07 Removed the obsolete 1pole and 2pole symbols(Use the UniversalOpamp2 in
stead).
01/25/07 Added symbols and models for the LT6000, LT6001, LT6002, LT6003, LT6004
, LT6005, LT6402-6, LT6402-12, LT6402-20, LT6552, LT6557, LT6558, LT6559, and LT
C6244.
01/25/07 Revised the LT1494, LT1671, LT1716, LT1011, LT1017, LT1018, LT1803 and
LTC6241 models.
01/25/07 Revised the LT1128 symbol and model.
01/25/07 Revised the LT1028 symbol and model.
01/25/07 Revised the LT1719 symbol and model.
01/25/07 Revised the LT1494/5 model.
01/25/07 Added a symbol and model for the LT3845.
01/22/07 Revised the LT3013 and LT3013B models.
01/22/07 Revised the LT1009 model.
01/22/07 Added some new netlist attributes for interfacing with in-house tools.
01/16/07 Increased error verbosity for .measure statements in .step'ed simulatio
n datasets.
01/16/07 Removed an extraneous warning about fewer than two connections to VDMOS
gates.
01/08/07 The number of .save data entries is no longer limited to 4096 but limit
ed to address space.
12/19/06 Trapped a small memory leak regarding .nodeset statements.
12/19/06 Resolved a difference in the the the two solvers interpreted .nodeset s
tatements.
12/15/06 Revised the LTC3822 jig circuit.
12/15/06 Revised the LTC3828 symbol and model.
12/15/06 Revised the Si7884DP model.
12/14/06 Removed some extraneous output diagnostic message files.
12/13/06 Added a symbol and model for the LTC4416.
04/05/06 Fixed a problem annotating pin currents from symbols with many long pin
names.
04/04/06 Removed some duplicated error messages.
04/03/06 Revised the LT3474 model.
03/30/06 Improved the error message for some curly brace evaluation error condit
ions.
03/30/06 Added a symbol and model for the LT3466-1.
03/29/06 Added symbols and models for the LTC3458 and LTC3458L.
03/27/06 Revised the LTM4600 symbol.
03/26/06 Revised the LTM4600 model.
03/25/06 Shift+Control+Alt+H will draw hidden symbol attribute text in the highl
ight color.
03/25/06 Shift+Control+Alt+R will reannotate all reference designators starting
at 1 and going up.
03/24/06 Added symbols and models for the LT6100, LT1993-4, LT1993-10, LT1994, L
T1789-1, LT1789, LT1009, LT1021-5, LT1021-7, and LT1021-10
03/24/06 Revised the LTC1990 and LTC6101 models.
03/24/06 Resolved an issue some attributes' visibility when interfacing with inhouse tools.
03/24/06 Added a symbol and model for the LTC3770.
03/23/06 Revised the LTC3427 model.
03/23/06 Revised the LTC3418 symbol.
03/23/06 Resolved an issue parsing some legacy models.
03/22/06 Adjusted the shorted component circuit matrix optimizer.
03/21/06 Revised the LTM4600 model.
03/21/06 Revised the LTC1778-1, LTC1778, LTC3711, LTC3713, LTC3714, LTC3717-1, L
TC3717, LTC3718, LTC3720, and LTC3778 models.
03/20/06 Added a GSD2004W-V diode model.
03/20/06 Revised the models for the LTC3531, LTC3531-3, and LTC3531-3.3.
03/16/06 Added a symbol for the LTC1574HV.
03/16/06 Added a symbol for the LTC3406-1.2.
03/16/06 Added a symbol for the LTC3405A-1.375.
03/16/06 Added a symbol for the LTC4412HV.
03/16/06 Added a symbol for the LT1076HV.
03/16/06 Added a symbol for the LTM4600HV.
03/14/06 Revised the LT1339 model.
03/03/06 Resolved a syntax issue with too many equal signs in .model statements.
03/03/06 Added symbols and models for the LTC3531, LTC3531-3, and LTC3531-3.3.
03/01/06 Added a symbol and model for the LTC3490.
03/01/06 Revised the LT1952 model.
03/01/06 Added a symbol and model for the LTC3417.
03/01/06 Revised the LT1575 symbol.
02/23/06 Revised the LTC4354 model.
02/22/06 Added a symbol and model for the LTC4211.
02/22/06 Added a symbol and model for the LTC4354.
02/22/06 Resolved internal error No. 27.
02/21/06 Added a LTC3444 symbol and model.
02/21/06 Revised the LTC3827 and LTC3827-1 models.
02/16/05 Corrected a global node issue wrt interface to some in-house tools.
02/16/05 Revised the LTC3809-1 model.
02/15/06 Corrected an issue netlisting hierarchical blocks when used with in-hou
se tools.
02/15/06 Revised the LT3437 symbol.
02/15/06 Corrected a problem pointing at non-derived attributes when being used
with in-house tools.
02/15/06 Corrected an error counted the number of analysis statements found on a
schematic.
02/14/06 Added a LTC3427 symbol and model.
02/14/06 Added LTC3410, LTC3410-1.2, LTC3410-1.65, LTC3410-1.875, LTC3410B, LTC3
410-1.2, and LTC3410-1.875 symbols and models.
03/27/05 The buffer size used for Fast Access file conversion is now adjustable
and defaults to 40% of physical RAM instead of 25%.
03/25/05 Node "GND" is strictly enforced to be "0" in the schematic capture unle
ss it is a port name. "GND" has always been a special synonym for node "0" in t
he simulator.
03/25/05 Fixed a problem highlighting some nets with the Find utility.
03/25/05 Transient analysis with zero stop time is now reported as an error.
03/24/05 Corrected an error in the normalization of the DC component of FFT'ed w
aveforms.
03/24/05 Integrated RMS values of expressions are again displayed if they have t
he units of Amps or Volts.
03/23/05 Updated BSIMSOI to version 3.2.
03/21/05 Fixed a crash mode relating to infinite subcircuit recursion of a PCB e
xported netlist.
03/21/05 Fixed a crash mode relating to hierarchical navigation.
03/21/05 Corrected an problem computing subcircuit dissipation at any level of t
he hierarchy.
03/21/05 Corrected an error regarding subcircuit port current monitoring.
03/18/05 The Fast Access conversion dialog box is now resizable.
03/18/05 Corrected an error in the LT1813 model.
03/16/05 Added a user-programmable keyboard short cut for "Select Steps".
03/16/05 Fixed a problem regarding marching waveforms for .step'ed .op analyses.
03/16/05 .save statements can now include wild cards, e.g., .save V(*:x1:*) Id(m
*)
03/16/05 Fixed a memory leak affecting .tf analysis.
03/16/05 Added a symbol and model for the LTC3412A.
03/15/05 The Select Saved Waveforms dialog can now be used throughout the hierar
chy.
03/15/05 The Select Saved Waveforms dialog is now resizeable.
03/11/05 Hierarchical instance name mangling has changed, e.g., what used to be
I(R:1:2:3) is now I(x1:x2:R3).
03/11/05 The program no longer allows you to use names with a ':' in it if you a
ren't trying to make a bus.
03/11/05 You can now enter a hierarchical block by double clicking on it.
03/10/05 Added a LTC1702A symbol and model.
03/10/05 Corrected a problem reporting some bipolar base currents.
03/09/05 Subcircuit port currents now have haves of the form Ix(Instance:pin) an
d work at all levels of the hierarchy.
03/09/05 .end statements in .inc'ed files no longer terminate the global deck.
03/09/05 Fixed a problem computing dissipation in some hierarchical blocks.
03/08/05 Fixed the keyboard shortcut background color on XP.
03/08/05 Enabled auto parenthesis completion for derived attributes.
03/08/05 Added symbols and models for the LTC1709-7, LTC1709-8, LTC1709-85, and
LTC1709-9.
03/06/05 Adjusted the break point strategy.
03/04/05 Only bus pins on hierarchical or subcircuit blocks are now understood t
o promote the connected to wire to a bus.
03/04/05 GND is understood as a synonym for 0 in behavioral expressions as it ha
s been elsewhere.
03/04/05 Fixed a problem regarding VeriStop, VeriTimes, Digtial_Timing_Model, an
d Digtial_File symbol attributes with in-house tools.
03/04/05 Fixed a problem regarding SpiceOrder pin attribute when interfacing wit
h in-house tools.
03/02/05 Released BUS support.
03/02/05 Fixed a problem converting u to where it wasn't appropriate.
02/28/05 Fixed a problem regarding parametric plotting.
02/27/05 Fixed a problem with the attached cursor readout when the cursor was at
tached to the last data point of a simulation.
02/26/05 .raw files can now be converted to a Fast Access format that allows new
plot traces to be added.
02/26/05 Only the wire grid is used as a candidate for reduced pitch grids when
the grid pitch becomes too dense to display on the screen.
02/25/05 Fixed a problem that caused some .meas statement syntax errors to cause
the program to hang.
02/25/05 Fixed a problem in the LT1996 model.
02/24/05 Improved the visibility/contrast of sprited objects in the symbol edito
r against dark backgrounds.
02/24/05 Fixed a problem parsing .meas statements from/to syntax.
02/24/05 Fixed a problem displaying horizontal ticks after manually setting axis
limits an a reversed .dc sweep ordinate.
02/24/05 Removed some superfluous parenthesis in .meas statement result formatin
g.
02/24/05 Improved .meas statement error reporting regarding multiply defined .me
as result names.
02/23/05 Changed complex data comparison from magnitudes to real parts in .meas
statements.
02/23/05 Added an LT1952 symbol and model.
02/23/05 Fixed a simulation speed problem regarding .tran analyses with non-zero
"Time to Start Saving Data".
02/22/05 Revised the LTC1778-1, LTC1778, LTC3711, LTC3713, LTC3714, LTC3717-1, L
TC3717, LTC3718, LTC3720, and LTC3778 models.
02/17/05 Plotwinsize is automatically reduced so that no more than an amount equ
al to 25% of physical memory is needed for the waveform data compression buffer.
02/17/05 Corrected the bias shutdown input bias currents of the 1976, 1977, 1976
, 3434, 3435, and 3437 models.
02/16/05 Sped-up parsing large(>100K components) netlists.
02/14/05 Updated the LT1618 model.
02/14/05 Improved error reporting regarding missing device nodes.
02/13/05 Sped-up optional deletion of wires jumpering component pins.
02/10/05 Integrated RMS values of expressions are no longer displayed so as not
to confuse averages of dissipation expressions.
02/09/05 Corrected a problem doing FFT's on .step'ed datasets.
02/09/05 Corrected a crash mode relating to copying huge blocks of circuitry.
02/09/05 Sped-up wire scrub and netlist generation.
02/08/05 Corrected a problem evaluating user-defined plotting functions that ind
ex into .step'ed data.
02/08/05 Blank "simulation results" windows are now suppressed from view.
02/08/05 Implemented BJT Ibc and Ibe parameters.
02/05/05 Sped-up schematic copying of large blocks of duplicated circuitry.
02/04/05 The "Add GMIN across current sources" hack is now also applied to F-sou
rces.
02/04/05 Formulae for non-derivable attributes are no longer shown on the schema
tic.
02/04/05 Revised the LTC1624 model.
02/04/05 Most circuit elements with all terminals shorted together are now ignor
ed in the simulation.
02/03/05 Corrected a problem with behavioral delays.
02/02/05 Added an LT3782 symbol and model.
02/01/05 Improved the error reporting for error code 53.
01/30/05 The PADS netlist output now contains a version/date comment.
01/29/05 Improved error reporting regarding error codes 74 and 135.
01/29/05 Updated the LT1766, LT1956-5, LT1956, LT1976, LT1977, LT3430, LT3431, L
T3434, LT3435, and LT3437 models.
01/29/05 Corrected the accuracy of .meas statements operating over the simulatio
n limits of .step'ed datasets.
01/27/05 Native SwCADIII symbols can now be used with in-house schematics.
01/26/05 MOSFET level 54 is now accepted as a synonym for level 14.
01/26/05 Fixed a problem with error reporting when exporting netlists.
01/21/05 Fixed a crash mode related to using busses with in-house tools.
01/21/05 The UniversalOpamp model's input resistance is now programmable.
01/21/05 The 1pole and 2pole opamp models' input resistance is now programmable.
01/20/05 Added an LT1936 symbol and model.
01/19/05 Improved the speed marching eye diagram waveforms.
01/19/05 Improved the speed of Gear integration.
01/18/05 Added SYNC to the LT1766 symbol and model.
01/17/05 Added an LTC3723-2 symbol and model.
01/14/05 Added an LTC3723-1 symbol and model.
01/14/05 Fixed a problem regarding startup dwarf pulses from LTC3703/-5 models.
01/12/05 Fixed a problem relating to delayed start of data accumulation.
01/12/05 Added an LTC3721-1 symbol and model.
01/11/05 Fixed a problem with SMPS going to 100% duty.
01/08/05 .inc and .lib statements can now include http url's.
01/07/05 Added some entries to the MOSFET database.
01/07/05 Updated the capacitor database with more items from KEMET.
01/07/05 Added an LTC3416 symbol and model.
01/06/05 Added an LT3472 symbol and model.
01/05/05 Fixed a bug evaluating compressed data in .meas ... at= statements.
01/05/05 Fixed a bug in the simulation setup editor when a .tf analysis was pres
ent on the schematic.
01/04/05 Corrected a problem finding precise .meas trig, targ, and at times.
01/04/05 Corrected a problem regarding nested subcircuits with cross-scoped invo
cations.
12/30/04 Improved the ability to point at components with overlapping bounding b
oxes.
12/29/04 Added symbols and models for the LT1011, LT1015, LT1017, LT1018, LT1711
, LT1713, LT1715, LT1716, LT1794, LT1970, LT1991, LT1996, LT6650, LT6700-X, LTC1
563-X, LTC1841, LTC1842, LTC1843, LTC6910-X, and LTC6911-X.
12/28/04 Updated the help documentation wrt .measure, numdgt, and measdgt.
12/25/04 Fixed a crash mode related to printed .step'ed integral .meas statement
s.
12/22/04 Implemented .measure commands.
12/21/04 Added small signal current monitoring to the arbitrary capacitance devi
ce.
12/21/04 Corrected an error reporting integrated BW of native data traces.
12/15/04 Corrected a hierarchical netlisting issue with pinless ports.
12/14/04 Corrected an issue interfacing bused hierarchical circuit elements to s
ome in-house tools.
12/09/04 Device shrink is now communicated through the registry to other in-hous
e tools.
12/08/04 Setting .option numdgt >= 6 now writes a .raw file with double precessi
on compression coefficients.
12/08/04 Fixed a problem calling numbered attributes in derived attributes.
12/07/04 Added an LT3437 symbol and model.
12/07/04 Corrected an incompatibility with some older in-house tools.
12/06/04 Corrected the start-up behavior of the LTC3803 and LTC3803-5 models.
12/06/04 Updated the LT1431 model with one using only 3 internal nodes instead o
f 29.
12/03/04 Fixed a problem using the ternary operator in behavioral sources scoped
to a subcircuit.
12/02/04 Added a symbol and model for the LT3471.
12/02/04 Direct connections b/t pins of the same symbol are now allowed whenever
interfacing to in-house tools.
12/02/04 Made Boolean comparison syntax for derived attributes the same as used
in other in-house tools.
12/02/04 Ignores a larger set of .option statement used in foreign simulators.
12/02/04 A dollar sign is now understood to introduce a mid-line comment in some
situations.
12/01/04 Corrected an issue interfacing bused hierarchical circuit blocks to som
e in-house tools.
12/01/04 Added the option to go to Linear's website for the datasheet from the s
ymbol.
12/01/04 Updated the help documentation.
12/01/04 BSIM4 small signal operating point parameters from a .op are now printe
d in the log file.
12/01/04 Fixed a problem parsing some cases of 3 terminal VDMOS instances.
11/30/04 Fixed a memory leak regarding MOSFETs.
11/30/04 Improved the auto-ranging algorithm for invariant noise data.
11/30/04 Implemented instance m-factor for BSIM4.
11/30/04 Updated the BSIM4 device from 4.2.1 to 4.4.0.
11/23/04 The simulation setup editor main tab can now be changed with the comman
d line.
11/22/04 The netlist editor is automatically maximized if it's the only open win
dow.
11/20/04 Corrected an error in the EKV charge model.
11/19/04 Added a model and symbol for the LTC3703-5.
11/18/04 Added a model and symbol for the LT1528.
11/18/04 Corrected the line regulation of the new LDO models.
11/16/04 Added a models and symbols for the LT1584/5/7 series.
11/16/04 Added symbols for the LT1963A-series.
11/16/04 Added symbols for the LT1764A-series.
11/15/04 Added a models and symbols of the LT1086, LT1086H, LT1086-2.85, LT10863.3, LT1086-3.6, LT1086-5, and LT1086-12.
11/15/04 Updated the LT1083/4/5 LDO models.
11/15/04 Corrected an error in the 2pole opamp model.
11/15/04 Added topologycheck to the help documentation.
11/12/04 Corrected an error in .dc sweep analyses.
11/11/04 Trapped a numerical overflow condition in diode evaluation.
11/11/04 Added symbols and models for the LTC3429 and LTC3429.
11/11/04 Resolved an issue using LTspice with some other in-house tools.
11/11/04 Added symbols and models for the LT1977 and LT3435.
11/10/04 The value attribute of the opamp2 symbol is now visible by default.
11/10/04 Fixed a crash mode relating to reporting netlist errors.
11/09/04 Added a models and symbols of the LT3463 and LT3463A.
11/09/04 Added a model and symbol of the LT3466.
11/08/04 Corrected another problem reading legacy POLY() sources.
11/08/04 Added symbols and models for the LT1964-SD, LT1964-BYP, and LT1964-5.
11/06/04 Removed an extraneous line of pixels in waveform and schematic screen b
itmaps copied to clipboard.
11/05/04 Added an example in the Educational directory using an ideal transforme
r.
11/05/04 Added a couple examples in the Educational directory using inductive tr
ansformers.
11/05/04 Corrected a grammatical issue in the field sync progress dialog.
11/05/04 Increased flexibility in setting the horizontal plot limits of parametr
ic plots.
11/04/04 Improved the display of MOSFET models in the MOSFET editor.
11/04/04 Corrected a problem reading legacy POLY() sources.
11/04/04 Improve error recovery of one of the internal circuit compilers.
11/01/04 Corrected an error in the LT3441 model.
11/01/04 Added symbols and models for the LT3010 and LT3010-5.
11/01/04 Corrected an error in the LT4430 model.
10/29/04 Corrected an error in the LTC1475 and LTC1475 models.
10/29/04 Corrected an error in the LT1619 synthesizer schematic.
10/29/04 Updated the LTC3803-5 model.
10/28/04 Added symbols and models for the LT1529-3.3 and LT1529-5.
10/28/04 Updated the LT1529 LDO model.
10/28/04 Added symbols and models for the LT1521-3, LT1521-3.3 and LT1521-5.
10/28/04 Added a symbol for the LT1521.
10/28/04 Updated the LT1521 LDO model.
10/28/04 Added symbols and models for the LT1129-3.3 and LT1129-5.
05/03/04 Right clicking on an attached cursor now shows which dataset of .steppe
d data the cursor is attached.
04/30/04 Cleaned up some schematic redraw issues.
04/28/04 Added a symbol and model for the LT3436.
04/28/04 Added tabs to allow switching between windows.
04/28/04 Added symbols and models for the LT3461 and LT3461A.
04/28/04 Improved the behavior of the monolithic MOSFET editor when specifying p
arameters that don't have named entries in the dialogbox.
04/27/04 Corrected an error reporting the current in sources using look-up table
s.
04/26/04 Waveform viewer again accepts plot expressions with if() statements.
04/23/04 Fixed a problem plotting .dc sweep data after a .step run.
04/16/04 Alleviated an internal race condition in the LTC1773 model.
04/16/04 Added a symbol and model for the LTC2923.
04/16/04 Corrected a parsing problem in the alternate solver.
04/14/04 Corrected a problem cross-probing voltage nodes named with certain spec
ial characters.
04/14/04 Corrected a problem in the LTC3803 model.
04/13/04 Corrected a potential error in the Schmidt trigger execution.
04/13/04 Updated the help file with documentation on the new non-linear inductor
s.
04/09/04 Included the two new non-linear inductors in the alternate solver.
04/09/04 Added instance inductor tempco's tc1 and tc2.
04/09/04 Corrected a couple errors in the JFET library.
04/08/04 Improved the hard saturation magnetic core behavior.
04/08/04 Corrected an inconsistency of which model is used when multiply defined
.
04/07/04 Inclusion of default semiconductor libraries and models can now be supp
ressed on the tools=>Control Panel=>Netlist Pane.
04/07/04 Made some of the warnings and error messages more legible.
04/06/04 Corrected a problem the LT1681 and LT3781 models' softstart logic.
04/01/04 Fixed a problem using lookup charge tables in the arbitrary capacitance
device.
04/01/04 Fixed a problem resolving some node names called in the arbitrary capac
itance device.
03/30/04 Revised the LT1166 model.
03/30/04 Floating point notation is now understood for MOSFET level integer.
03/22/04 Fixed a problem writing .wmf files under Win98 systems.
03/22/04 Units after numbers in behavioral expressions are now ignored as commen
ts.
03/22/04 The sign of diode Ibv is now ignored.
03/22/04 The Print Monochrome setting also makes B&W Windows metafiles.
03/21/04 The font size used for waveform plots is now user selectable.
03/20/04 Added the ability to export a waveform plot to a Windows metafile(.wmf)
.
03/19/04 Added the ability to export a schematic to a Windows metafile(.wmf).
03/18/04 Improved the sort order of nodelists in the Select Traces dialog.
03/08/04 Revised the LTC3736 model.
03/08/04 Revised the LT1074 model.
03/05/04 Corrected an error reporting JFET terminal current.
03/05/04 Added a symbol and model for the LT1166.
03/04/04 Corrected an error evaluating JFET impact ionization current.
02/25/04 Corrected the softstart logic of the LTC3703 model.
02/25/04 Corrected the Imax trip hysteresis of the LTC3703 model.
02/25/04 Added an LTC4300A-1 symbol and model.
02/25/04 Fixed a crash mode relating to over-writting plot settings files.
02/25/04 Sped-up some string/parsing operations.
02/23/04 Corrected a problem executing some user-defined functions.
02/23/04 NPN parameters C2 and C4 are now interpreted as multipliers of Is if >=
1.
01/06/04 The right button context menus for component database editors work agai
n.
01/06/04 Improved error handing when a nonexistent proxy server is stipulated.
01/05/04 Added the ability to add a user name and password(neither remembered) f
or Internet service for release syncs through a proxy.
01/03/04 Resistor, Capacitor, and Inductor databases are now searchable.
12/31/03 Reduced column header flicker when resizing the R, C, and L database ed
itors.
12/30/03 Improved resizing behavior of the R, C, and L select stock component di
alogs.
12/29/03 Corrected a memory leak in the sync release code.
12/29/03 Improved file download status reporting for updating off the web.
12/29/03 Corrected some problems running under Chinese Editions of Windows.
12/24/03 "Ohm" is now replaced with a capital Greek omega in the column headers.
12/23/03 "Ohm" is now replaced with a capital Greek omega in the dialog text.
12/23/03 Component databases are backed-up before merging during a sync release.
12/22/03 Improved the look of the some edit widgets under Linux/WINE.
12/22/03 The 1st line comment of a top-level deck may now be empty.
12/22/03 Subcircuit ports may now contain square braces as long as they don't br
ace the entire port name.
12/22/03 Improved the operation of the manual plot limit dialogs.
12/18/03 Improved the ability to cross probe a subckt's port current when drafte
d with a symbol that is an Prefix'ed as an intrinsic SPICE type.
12/17/03 The 4-terminal monolithic MOS dialog can now parse out parameterized va
lues of L, W, etc. that are single quoted.
12/17/03 "Ohm" is now replaced with a capital Greek omega in the manual plot lim
it dialogs.
12/16/03 Corrected a problem with the vertical line spacing of the netlist and e
rror log views on Win98.
12/12/03 "Ohm" is now replaced with a capital Greek omega on the attached cursor
readout windows.
12/11/03 Added symbols and models for the LT6600-2.5, LT6600-10, and LT6600-20.
12/11/03 "Ohm" is now replaced with a capital Greek omega on the status bar(exce
pt on Linux systems).
12/10/03 Popup context menus now have command prompts on the status bar.
12/09/03 "Ohm" is now replaced with a capital Greek omega on unit axis labels(ex
cept on Linux systems).
12/08/03 Corrected a crash mode relating to unwrapping phase of complex data cur
sor readouts.
12/08/03 The ratio between the two attached cursor values is now uniformly displ
ayed for complex data independent of the plotting representation.
12/07/03 Corrected a problem handling empty waveform expressions.
12/07/03 Corrected an error reading out the last datapoint of an complex dataset
with an attached cursor.
12/04/03 .tf impedances can now be used in waveform expressions.
12/03/03 Improved the TAB order of the simulation command editor.
12/02/03 Constants used in expressions of waveforms may now contain units.
12/02/03 Added the ability to have more than two vertical plot axes for real dat
a sets.
12/01/03 Added a compiler to analyze the units of expressions of waveforms.
11/25/03 Parameter names may now start with leading underscores.
11/19/03 An attempt is made to better orient flags directly connected to pins.
11/19/03 DC .op solution power dissipation is now visible on the status bar.
11/18/03 The LTC3717 model's Run/SS pin now clamps to 6V.
11/18/03 Added some power MOSFET models.
11/18/03 Dragging a flag off a direct pin connection will now start a rubber-ban
ded wire b/t the flag and pin.
11/18/03 Instantaneous power dissipation is automatically calculated from exitin
g voltage and current waveforms and plotted as a new trace when Alt-left clickin
g a symbol.
11/17/03 Improved annotation of subcircuit port currents with symbol pin names.
11/17/03 Improved netlist-level error reporting of R's and C's missing values.
11/14/03 Fixed problem printing waveforms to Adobe Acrobat Distiller(TM).
11/13/03 Fixed a breakpoint handling problem.
11/13/03 The select step dialog can be sorted by clicking on the column header.
11/13/03 Corrected an error plotting expressions of complex data in Cartesian re
presentation.
11/12/03 There's now a dialog that allows specific runs of .step'ed datasets to
be displayed.
11/11/03 Employed an alternate method of finding the default e-mail program.
11/07/03 If a datafile is opened up with no other windows open, it fills the app
lication's window.
11/06/03 Made programming rail limits of the universal 2pole opamp model more st
raightforward.
11/04/03 Corrected an error in the LT1074, LT1076, LT1106, LTC1516, LTC3718, LTC
3440, and LTC3441 models.
11/04/03 Corrected an error in the LTC3401 and LTC3402 models.
11/04/03 The attached cursors work again with Cartesian representation of comple
x data.
11/04/03 Improved color/dash-line scheme used in complex data plots.
11/03/03 Auto deletion of .log and .raw files now apply to netlists as well as s
chematics.
11/03/03 The .log file of a simulation can now be optionally deleted or not by d
efault when closing the schematic.
11/03/03 The reset defaults on the drafting option pane of the control panel now
correctly clears thick pen style.
11/03/03 The additional PWL point dialog box is now resizable.
11/03/03 Corrected a problem with using VDMOS in the alternate solver.
11/03/03 Mfg, Vds, Ron, and Qg are now ignored parameters for all MOS as they ar
e for VDMOS.
11/03/03 Resistor tolerances are now displayed on the BOM.
10/30/03 It's now possible to define keyboard shortcuts for drawing lines, recta
ngles, circles, and arcs on schematics.
10/30/03 Schematic graphics now snap to a 4x coarser grid unless the control key
is held down.
10/30/03 Corrected a problem in the LT1934/-1 model.
10/26/03 Added an "Up One Level" button to the select component dialog.
10/26/03 Rearranged the select component dialog so that there's more space for t
he path.
10/17/03 The keyword "REPEAT" is now accepted in a .savebias statement.
10/17/03 The font selected for netlists is now preserved between program invocat
ions.
10/16/03 Added initial support for .savebias/.loadbias statements.
10/16/03 .ic and .nodeset statements may now refer to device internal nodes.
10/15/03 Fixed a string memory management problem relating to reporting missing
MOS models.
10/14/03 The nag dialog about updating no longer recommends trying to sync your
release over the web when running under Linux.
10/13/03 Units of Nyquist plots can now be turned off.
10/13/03 Propagated the new Laplace convoluter to the alternate solver.
10/13/03 The horizontal axis of Nyquist plots can now be manually set well beyon
d the extent of data.
10/08/03 Fixed a problem with attached dataset cursor wrap when navigating with
keyboard cursor keys.
10/09/03 An error is now issued if a mutual inductance between the same two indu
ctors is specified twice.
10/07/03 Corrected an error with the LTC3413 model's ability to sink current.
10/06/03 Added an LT1568 model and symbol.
10/06/03 Added the LTC3803 quiescent current to the model.
10/06/03 Fixed a crash mode relating to the selecting visible traces.
e editions of windows.
02/11/03 Allowed the Greek Mu symbol to be displayed in the list controls in Chi
nese editions of windows.
02/10/03 A .step command with only one data point is now flagged as an error.
02/10/03 Fixed a potential crash mode when editing component values.
02/10/03 Allowed the Greek Mu symbol to be displayed on the waveform and schemat
ic on Chinese editions of windows.
02/07/03 Corrected the voltage rating of some of the templates used in the synth
esizer.
02/04/03 Fixed a problem parsing the files from "PWL FILE" syntax.
02/04/03 Fixed a problem in the LTC1628-SYNC, LTC3727, LTC3728, and LTC3732 mode
ls.
02/04/03 It's easier to delete traces with the delete key during marching wavefo
rm updates.
02/04/03 Restarting marching waveforms no longer changes trace color settings.
02/04/03 Corrected the LT3439 model to include current limit.
02/02/03 Fixed a problem pointing at multi-line blocks of text on the schematic.
02/02/03 Fixed a problem scaling BSIM3 transistors for .AC analyses.
01/31/03 Improved the look of some dialogs when running under Chinese editions o
f Windows.
01/31/03 It's possible to convert all instances of '' to 'u' on the screen for wi
ndow systems that don't have fonts that allow a Greek Mu to be displayed.
01/31/03 The obsolete File=>SPICE Netlist=>Extract Subckt command has been remov
ed from the menu.
01/27/03 The net right button menu can now be used to reach the place netname co
mmand.
01/27/03 Schematics missing symbols can be opened and resaved to omit the missin
g symbols.
01/27/03 The description attribute of symbols can now be edited in the symbol ed
itor.
01/26/03 Cross-probing noise contributions now works throughout the hierarchy.
01/25/03 The EuropeanResistor symbol was made narrower.
01/24/03 Fixed a problem evaluating PWL(repeat for .. endrepeat) syntax.
01/23/03 Auto panning the schematic is defeated while returning the mouse to the
schematic after using the toolbar.
01/23/03 Improved the branch selection of the complex sqrt() function.
01/23/03 The LT1512 model Ifb reference was corrected to be 100mV instead of 120
mV.
01/22/03 The bitmap seen while editing a symbol can now be copied to the windows
clipboard.
01/22/03 Corrected an error in the lossy T-Line symbol.
01/21/03 rand() and random() are now available in parameter expressions.
01/20/03 Memory management under Windows 98 was improved.
01/19/03 The spinner controls on the symbol editor work again.
01/18/03 Fixed a problem the the EKV MOSFET implementation in LTspice.
01/17/03 The help system was updated.
01/17/03 Schematic text can now be rotated to be vertical.
01/17/03 Hierarchical schematics are now supported.
01/17/03 A graphical symbol editor was introduced.
01/08/03 LBin and LBout pins of the LTC1174 series were added.
01/08/03 Fixed a problem with pin current monitoring
11/22/02 Corrected an error in the LT1510 model.
11/22/02 Corrected PWL parsing problem that used to preclude assigning a series
resistance to PWL voltage sources.
11/21/02 Corrected some more problems relating to discontinuous mode in the LTC1
778-1, LTC1778, LTC3711, LTC3713, LTC3714, LTC3720, and LTC3778 models.
11/21/02 Corrected an error in the LT1615/-1 models.
11/19/02 Added a generic varistor symbol.
11/19/02 Added a generic TRIAC symbol.
11/19/02 Corrected an error in the LT1176 model.
09/29/02 Resistor instance parameter tc2 will now be accepted without tc1.
09/25/02 Removed screen flicker from the color palette editor.
09/25/02 Netlist continuation lines can now be displayed in a different color.
09/25/02 Added LT1797 and LT1800 symbols and models.
09/24/02 Fixed a problem parsing Laplace transfer functions.
09/23/02 Added models and symbols for the LT1934 and LT1934-1
09/23/02 It's again possible to paste characters like '' into the text editors.
09/21/02 Fixed a potential crash mode relating to opening .raw files without the
schematic or netlist.
09/21/02 Fixed a problem updating the symbol's ASCII representation when horizon
tally scrolling.
09/21/02 Fixed a problem autoranging the Nyquist plots.
09/21/02 Cleaned up some aspects of the open file command.
09/20/02 Implemented attached cursors for Nyquist plots.
09/19/02 It's again possible to save only drain(collector) currents to reduce th
e size of output files.
09/18/02 Fixed a problem with positioning the cursor for horizontally scrolled t
ext in the new ASCII editors.
09/17/02 Added MOSFET models for the Si7866 and Si7868.
09/16/02 Added the ability to represent complex data as a Nyquist plot in additi
on to the Bode plot default.
09/11/02 Added an LTC3202 model and symbol
09/11/02 Corrected the synthesizer's record of the 1622's reference voltage
09/10/02 ASCII editor colors are now programmable on the color pallete.
09/10/02 Netlist text is now colorized according to whether the text is a commen
t or dot command
09/10/02 There's a context menu for capacitor, inductor, and resistor database e
ditors.
09/10/02 JFET libraries can now be searched.
09/09/02 Updated the netlist editor to one with unlimited undo/redo.
09/07/02 Updated the symbol editor to one with unlimited undo/redo.
09/06/02 The color palette dialog sliders now work under Windows 95.
09/05/02 Updated the editor used for ASCII libraries to one with unlimited undo/
redo.
09/04/02 The Select Waveform for FFT dialog is shorter to fit better on lower re
solution screens.
09/03/02 The installation dialog is shorter so it fits on lower resolution scree
ns.
09/03/02 Panning waveforms will no longer un-sync horizontal axes of multiple pa
nes.
09/03/02 Sped up expanding PWL's using repeat syntax.
09/03/02 Corrected a problem in the LT1256 model.
09/02/02 Added a single level of undo to the symbol editor.
09/02/02 Added a single level of undo to the netlist editor.
09/01/02 Fixed a problem parsing PWL repeat forever...endrepeat syntax
08/30/02 Syntax as "E1 2 0 FREQ { V(1) } = (1K,0,0) (10K,-80.,90)" is now unders
tood.
08/30/02 Fixed some problems with attached cursors on stepped and parametrically
plotted data.
08/30/02 Added steady state detection to the LTC3411
08/30/02 Allowed a the frequency domain response of behavoral sources to be spec
ifed with a lookup table.
08/29/02 Fixed a crash mode relating to resimulating complex data while cursors
were attached to traces.
08/29/02 Corrected some problems regarding attached cursors ganged across plotti
ng panes.
08/28/02 Corrected the min offtime of the LT1765 model.
08/28/02 Syntax such as "E1 1 0 Laplace { -V(1)*3 } = { 1/(1+s) }" is now unders
tood.
08/28/02 Behavioral sources; e.g., B1 1 0 V=V(3)*V(4); can now also include a La
place transform.
08/28/02 A problem rerunning complex data is fixed when the saved nodes varies f
rom run to run.
08/28/02 ".ac lin 1 1Meg 1Meg" is now treated the same as ".ac list 1Meg"
08/26/02 The uninstaller is now able to completely delete itself.
08/26/02 The uninstaller will also remove scad3.ini from the windows directory.
08/26/02 Fixed a plotting/compression artifact for stepped data.
08/25/02 Corrected the setup simulation dialog's ability to compose a logarithmi
c .dc sweep.
08/24/02 The error message for loading schematics where the symbol files can't b
e found is handled better.
08/24/02 Fixed a problem wrapping the attached cursor from dataset to dataset wi
th the keyboard up/down cursor keys.
08/24/02 The release version can now be seen under properties of the right click
menu on the file name in the explorer.
08/23/02 Resistor, capacitor, inductor, MOSFET, diode, BJT, and JFT selection di
alogs are now resizable.
08/23/02 Error logs are now shown in the same font as a netlist.
08/22/02 The new installer states which version of LTspice/SwCADIII it will inst
all.
08/21/02 Cancelling all zooms in one pane doesn't unsynchronize it from other pa
nes if sync is selected.
08/20/02 An NT crash mode was fixed.
08/19/02 The distribution was changed from being a self-extracting zip file to a
self-extracting/self-installing gzip file.
08/18/02 The uninstall program was replaced with one that better cleanups up aft
er itself wrt the registry.
08/17/02 The install program was replaced.
08/16/02 Added an LT3732 symbol and model.
08/15/02 Fixed a problem using device currents in behavioral sources.
08/15/02 The grip to resize dialogs is now easier to hit with the mouse.
08/15/02 Added an LED diode symbol.
08/14/02 A four terminal MOSFET is now edited in a dialog that allows easier ent
ry of the device's dimensions.
08/13/02 Added a 30BQ060 diode model.
08/12/02 Added a dialog to help enter the simulation command.
08/08/02 Printing waveforms with the monochrome option is now gives more distinc
t plots.
08/08/02 The PWL source editor no longer tries to sort incrementally specified t
imes.
08/07/02 Added an LT1947 symbol and model.
08/07/02 Added an LT3420 symbol and model.
08/07/02 Fixed a problem relating to parametric(XY) plots.
08/06/02 Fixed a problem with the add trace command for complex data.
08/05/02 Cleaned up some attached cursor problems for parametric plots.
08/05/02 Added an LT1961 symbol and model.
08/02/02 Schematic node names may now be up to 30 characters long.
08/02/02 Fixed a problem regarding cursors on multi-panned plots.
08/02/02 Added an LTC3707 symbol.
08/02/02 Added an LTC3701 symbol and model.
08/02/02 Fixed a problem updating the attached cursor readout.
08/01/02 Fixed a problem in the pinout of one of the opamp symbols.
08/01/02 Fixed a crash mode in the waveform viewer.
08/01/02 Added an SCR symbol.
07/31/02 Fixed a problem with pointing to trace labels with the mouse.
07/31/02 The delete key can be used to enter delete mode in both schematics and
waveforms.
07/31/02 The delete trace mode can delete a plotting pane if the pane is empty o
f traces.
07/30/02 Added a delete trace command.
06/14/02 A PWL can use the keyword "FILE" to include points from another file.
06/14/02 A PWL time can be preceded with a '+' go mean that the time is incremen
tal from the previous time.
06/14/02 Implemented PWL time_scale_factor and value_scale_factor.
06/13/02 A '*' can not longer introduce the start of a comment mid-line if not p
receded with whitespace.
06/13/02 Implemented tt for the BSIM3 bulk junction.
06/13/02 Fixed a problem reading "params:" syntax when there were no parameters
listed.
06/12/02 Added progress information during .noise calculations.
06/12/02 Made some adjustments to the LTC3412 model.
06/11/02 Implemented cross probing of total device noises.
06/11/02 The waveform plotting window remembers linear vs. log settings between
simulations.
06/11/02 The waveform plotting window takes a hint from the sweep type for linea
r vs. log settings.
06/10/02 Fixed various problems in .noise calculations.
06/09/02 Implemented nlev and gdsnoi parameters in MOS1, MOS2, and MOS3
06/08/02 Cleaned up some plotting problems for .step'ed data sets.
06/08/02 Cleaned up some plotting problems relating to data sets containing some
singular data points.
06/07/02 Corrected some noise calculation problems in MOS levels 1, 2, and 3.
06/06/02 Added an LT1940 symbol and model.
06/05/02 Added an LTC3778 symbol and model.
06/04/02 Fixed a problem in the DC solution strategy.
06/04/02 Added a new type of analysis, ".dc temp..." Much faster than ".step te
mp ..." but doesn't re-evaluate deck parameters even if they call temp and not w
ell tested, yet.
06/03/02 Added an LTC3412 model and symbol.
06/02/02 A error is issued if the disk get full while writing a .wav file.
06/01/02 Output data file sizes are no longer limited to 2Gigabyte, but disk siz
e.
05/31/02 Fixed a problem parsing some E1 n1 n2 POLY(N) ... syntax.
05/31/02 Added an LTC3411 model and symbol.
05/31/02 Updated the help system with .wav file I/O documentation.
05/31/02 Adjusted the DC solution strategy.
05/30/02 Fixed a crash mode relating to aborting a simulation during gmin steppi
ng.
05/30/02 Increased the search path of further included libraries to include the
directory of the library invoking the inclusion.
05/30/02 Fixed a grid snap issue when copying components pointed to by a text at
tribute.
05/29/02 Added IGBT symbols(for 3rd party supplied models).
05/29/02 Fixed a problem computing paths relative to the schematic directory.
05/29/02 Added examples showing .wav file I/O.
05/29/02 Enabled device evaluation bypass for BJT's and diodes.
05/29/02 Fixed a crash mode relating to selecting a pin current in a model dialo
g while the simulation was in progress.
05/29/02 Fixed a memory leak relating to cross probing.
05/29/02 Removed more function calling overhead in device evaluations.
05/28/02 It's possible to save only Idrain(or Icollector) of transistors in orde
r to reduce the size of the output .raw data file.
05/24/02 Fixed a crash mode involving BSIM3 and BSIM4.
05/04/02 Corrected the LTC3440 input current limit.
05/24/02 ".dc temp ..." is now accepted as ".step temp ..."
05/23/02 Node voltages or device currents may now be written out as a .wav file.
Syntax: .wave "C:\cdq.wav" 16 44.1K V(left) V(right)
05/23/02 The unconnected indicator of a ground symbol or net label is now drawn
in the correct color.
05/22/02 Corrected a couple errors in the synthesizer template circuits.