Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
AWWA standards are vital guidelines for all facets of the water community. They provide the minimum requirements for design, installation, performance, and manufacturing of products used in
the water industry. Theres also a series covering utility management. Each standard designation
consists of two elements connected by a hyphen, such as B200-07, which indicates the standard is in the 200 series (Softening) and received AWWA board of directors approval in 2007.
New standards may be first editions or revisions of existing standards. AWWA standards are also
adopted as ANSI standards. Contact the AWWA Store, www.awwa.org/store, 800.926.7337, or
custsvc@awwa.org. Watch the AWWA website or Journal - American Water Works Association for
official notice of new standards or any status changes to existing standards.
SOURCE
Groundwater and Wells
A100-06 Water Wells
TREATMENT
Filtration
B100-09 Granular Filter Material
B101-01 Precoat Filter Media
B102-10 Manganese Greensand for
Filters
B110-09 Membrane Systems
Softening
B200-12 Sodium Chloride Revised
B201-08 Soda Ash
B202-07 Quicklime and Hydrated Lime
Disinfection Chemicals
B300-10 Hypochlorites
B301-10 Liquid Chlorine
B302-10 Ammonium Sulfate
B303-10 Sodium Chlorite
B304-08 Liquid Oxygen for Ozone
Generation for Water,
Wastewater, and Reclaimed
Water Systems
B305-06 Anhydrous Ammonia
B306-07 Aqua Ammonia (Liquid
Ammonium Hydroxide)
Coagulation
B402-12 Ferrous Sulfate Revised
B403-09 Aluminum SulfateLiquid,
Ground, or Lump
B404-08 Liquid Sodium Silicate
B405-06 Sodium Aluminate
B406-06 Ferric Sulfate
B407-12 Liquid Ferric Chloride Revised
B408-10 Liquid Polyaluminum Chloride
B451-10 Poly(Diallyldimethylammonium
Chloride)
B452-06 EPI-DMA Polyamines
B453-06 Polyacrylamide
24 Opflow January 2013
www.awwa.org/opflow
C903-05 PolyethyleneAluminum
Polyethylene & Cross-linked
PolyethyleneAluminum
Cross-linked Polyethylene
Composite Pressure Pipes,
In. (12 mm) Through 2 In. (50
mm), for Water Service
C904-06 Cross-Linked Polyethylene
(PEX) Pressure Pipe, In. (12
mm) Through 3 In. (76 mm),
for Water Service
C905-10 Polyvinyl Chloride (PVC)
Pressure Pipe and Fabricated
Fittings, 14 In. Through 48 In.
(350 mm Through 1,200 mm)
C906-07 Polyethylene (PE) Pressure
Pipe and Fittings, 4 In. (100
mm) Through 63 In. (1,600
mm), for Water Distribution
and Transmission
C907-12 Injection-Molded Polyvinyl
Chloride (PVC) Pressure
Fittings, 4 In. Through 12 In.
(100 mm Through 300 mm),
for Water, Wastewater, and
Reclaimed Water Service Revised
C909-09 Molecularly Oriented Polyvinyl
Chloride (PVCO) Pressure
Pipe, 4 In. Through 24 In. (100
mm Through 600 mm), for
Water Distribution
C950-07 Fiberglass Pressure Pipe
STORAGE
D100-11 Welded Carbon Steel Tanks for
Water Storage
D102-11 Coating Steel Water-Storage
Tanks
D103-09 Factory-Coated Bolted Carbon
Steel Tanks for Water Storage
D104-11 Automatically Controlled,
Impressed-Current Cathodic
Protection for the Interior
Submerged Surfaces of Steel
Water Storage Tanks
D106-10 Sacrificial Anode Cathodic
Protection Systems for the
Interior Submerged Surfaces
of Steel Water Storage Tanks
D107-10 Composite Elevated Tanks for
Water Storage
www.awwa.org/opflow