Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Website: http://www.n-box.org
http://www.n-box.org
Lot 2975,Plot 6,Block 10,Ground Floor
3rd Miles,Jalan Tun Ahmad Zaidi Adruce,
93150 Kuching, Sarawak, Malaysia
Tel: 60-82-242424 Fax: 60-82-420187
Email: sales@n-box.org
Support Email: support@n-box.org
Support Forum: http://www.iphone-forum.org
Introduce of N-Box:
N-Box is a name for the box and the Author for the Box software is by SarasSoft.
The box is software Design and engineering by SARASSOFT.
N-Box By SarasSoft
Website: http://www.n-box.org
Use of Cable
Cable for 1100 can be use for 2300
Cable for 3310 can be use on 3330,3350,3390,3410
Cable for 3650 can be use for 3600, 3660
Cable for 5110 can be use for 5120,5130,5146,7110,6250,6210
Cable for 6100 can be use for 3100,3120,3108,6108
Cable for 6310 can be use for 6310i
Cable for 6600 can be use on 6620
Cable for 7210 can be use for 6200,6220,6610,6610i,7250,7250i,
Cable for 8210 can be use for 2100,3610,5210,8850,8250,8290,8890
Cable for 8310 can be use for 6500, 6510
Cable for 8910 can be use for 8910i
Cable for 9210 can be use on 9210i
Platforms For Nokia:
Dct-3 = 3210, 3310, 3330, 3350, 3390, 3410, 5110,5120,5130,5146, 6110,7110,6130,6138,8210,8250,8290,8850
8890,8855,6210,6250,2100,3610
Dct-4 1100,2300,3100,3108,3120,3510,5100,5140,6100,6108,6200,6225,6220,6230,6310,6500,6510,6610,6620
6650,6800,6810,6820,7200,7210,7250,7600,8310,8390,8910
WD-2 = 3600,3650,3660,6600,6620,7610,7650,N-Gage,N-Gage QD
Dct-L = 9290,9210,9210i
N-Box By SarasSoft
Website: http://www.n-box.org
Once you connect the box to computer you will see this
N-Box By SarasSoft
Website: http://www.n-box.org
choose/check on (install from a list or specific location (Advance) as the picture above then click
NEXT
It will ask you to browse for the Driver. The Driver will be located in your computer
C:\Program Files\Nokia\Phoenix\USB_Driver.
N-Box By SarasSoft
Website: http://www.n-box.org
After choose the correct directory of the Driver located then click NEXT and you will see
N-Box By SarasSoft
Website: http://www.n-box.org
N-Box By SarasSoft
Website: http://www.n-box.org
you will see one popup screen to ask for continue or stop installation as above picture, Press
Continue Anyway
N-Box By SarasSoft
Website: http://www.n-box.org
N-Box By SarasSoft
Website: http://www.n-box.org
N-Box By SarasSoft
Website: http://www.n-box.org
Quickbutton:
Connect/Disconnect:
You have to press connect button to connect software module with the N-Box hardware.
Without this connection you can not use any software module with N-Box.
Check:
Support Email: support@n-box.org
N-Box By SarasSoft
Website: http://www.n-box.org
Info:
You can test the communication Bus (F-Bus or M-Bus) and you can read info from your phone, it is
recommended to use this to check the cables and establish that you have a good connection.
Flash:
The Flash button can be use for manual flashing, if for example the phone is DEAD is manually to
choose the phone type, MCU and PPM and then press this button.
UI Setting:
Manual Option to executed predefined user interface settings.
[? ] :
This DROP-DOWN box lets you manually choose between NORMAL Mode, TEST Mode and
LOCAL Mode of the phone
Main Window (Left side):
Autodetect Product :
Use this option if you are not sure what kind of phone it is, it will autodetect it for you.
N-Box By SarasSoft
Website: http://www.n-box.org
N-Box By SarasSoft
Website: http://www.n-box.org
Product:
Choose your product (Model number), For example. 3310 NHM-5, 2100 NAM-2 etc
MCU :
Choose the MCU flash file (main phone firmware file to be flash)
PPM :
Choose the PPM file (Language Pack firmware, Must match MCU version)
PMM :
PMM is the extention used in N-Box for Vergin Eeprom etc..
Most know vergin eeproms in DEJAN format with extension .FLS
**Note: PMM file mostly used for the phone which Contact Service with error on eeprom or
eeprom checksum corrupted or if you have finish flash the MCU and PPM correctly still get Contact
Service for software fault. If still same then check your HARDWARE. Normally the error
Support Email: support@n-box.org
N-Box By SarasSoft
Website: http://www.n-box.org
Contact Service in hardware mostly COBBA Pararell which you have to reball or replace your
COBBA Chip.
WUG:
(Wakeup Graphics)- you can choose a customized wakeup / startup graphic)
UI Option :
You can double click this item to execute each one individually and immediately.
Save User Setting :
You can backup / save the main user setting before starting do any job with the phone.
UI Defaults :
Set the user setting back to default (Phone setting etc)
Full Factory Defaults :
Set the phone to the factory default setting, including resetting the wakrup graphics, security code,
phone book etc
Init Simlocks :
Unlock the SP-Locks / Network locks
Set FAID :
Calculate the FAID, (Flash Authory ID) which must be set after flashing the MCU or PPM.
***Note : If this set FAID fail you will get no network on phone or cannot register to the network, or
signal will updown for few secondsand will be auto restart it self.
Reset User Lock :
Set the user lock (Security Code) to factory default (12345)
Reboot in Normal Mode :
You can insert a sim card and after processing the phone will reboot into normal operating mode. Use
this to check normal operation. Please note that many USB ports cannot supply enough power for the
phone to transmit, so the phone may shut down when trying to register with the network when using
this feature. It is mainly to comfirm the phone will power on and accept the sim card etc
LCD Contrast :
Set the LCD Contrast
N-Box By SarasSoft
Website: http://www.n-box.org
Features :
3310 > 3315
Convert a 3310 to 3315 to enable extra menus. (This option only to beable for 3310 with version 5.45
and above.
3315 > 3310
Convert 3315 to 3310
3210 Vibra On / Vibra Off
Enable or Disable vibra menu for 3210
AUX Functions:
READ IMEI :
Read imei from the phone
Read Flash :
Use this function to make a backup of your phone firmware (Only DCT-3 models)
Convert Files :
Convert .FLS files to original Nokia Wintesla Files.
(Use this feature to convert the .FLS vergin Eeproms to use with N-Box)
Erase Flash :
Erase the whole flash and Eeprom. After you will need to flash MCU , PPM and PMM files,(FullFlash)
And REBUILD IMEI etc.(Flashing functions will erase the correct areas automatically)
Create INI file :
Create the ini file to be used with UI Options
Create Ini files is to make easy for you . It means after you have choose the setting , MCU ,PPM UI
setting then click CREATE ini.
Next time when you want to flash for the selected models which you already create the ini you no
need to select the MCU ,PPM or etcWhat you do is just click flash or start.
For DEAD Phone click flash and for normal phone click START.
N-Box By SarasSoft
Website: http://www.n-box.org
Product :
Choose your phone model, for example 3200 RH-30, 6610 NHL-4u, 6610i RM-37
MCU :
Choose the MCU flash file (Main phone firmware to be flash)
PPM :
Choose the PPM flash file (Language pack firmware, Must match with MCU version)
CNT :
Choose the CNT flash file (CNT = Content Pack)
This allows you to flash the standard factory wallpapers, ringtones, games and others applications
which are supplied as standard in the hand set.
PM :
Support Email: support@n-box.org
N-Box By SarasSoft
Website: http://www.n-box.org
PM (Permanent Memory)
This is the DCT-4 version of Eeprom but cannot be change and reset easily.
(DO NOT PLAY WITH THIS, YOU MAY DAMAGE YOUR PHONE !)
***Note : If you know what you are doing then you can play with the PM.
Enable BT Flashing :
Flash the Bluetooth firmware (BT=Bluetooth)
BT HW :
You can choose AUTO, OLD or NEW. Defaults is AUTO, however in some cases suck as some 7650
it is necessary to use OLD option if the BT function does not work correctly.
UI Option:
You can double click this items to execute each one individually and immediately.
Save User Setting :
You can backup / save the main user settings before starting do any job with the phone.
Full UI Defaults :
Set the user setting back to defaults (Phone setting etc..)
Full Factory Defaults :
Set the phone to the factory defaults settings, including resetting the wakeup graphics, security code,
phone book etc..
Software Upgrade Defaults :
This Done to Default you Software after Upgrade.
Init Simlocks :
Unlock SP-Lock / Network lock
Reset User Lock :
Set the user lock (Security Code) to factory defaults 12345
Reboot In Normal Mode :
You can insert sim card and after processing the phone will reboot into normal operating mode. Use
this to check normal operation. Please note that many USB ports cannot supply enough power to
phone to transmit , so the phone may shut down when trying to register with the network when using
this feature. It is mainly to comfirm the phone will power on and accept the SIM card and etc
N-Box By SarasSoft
Website: http://www.n-box.org
N-Box By SarasSoft
Website: http://www.n-box.org
For DEAD Phone click flash and for normal phone click START
Action window WD-2 Symbian phones :
All function are mostly /basically the same as the DCT-4, Please see the Previous section for Details.
Format User Area :
This function is to format phone user area.
Example : Normaly WD-2 phones faults like NOKIA words only then become off use this Format
User AREA to solve the problem.If still not works you need to write the erase file or reflash the phone.
N-Box By SarasSoft
Website: http://www.n-box.org
All Function are same as DCT-4 , Please see the previous section for details.
Dct-3 Phones
Support Email: support@n-box.org
N-Box By SarasSoft
Website: http://www.n-box.org
Check cables by schematics, use beeper here to make sure that all wires Are 100%
connected and well crimped.
2. If you have this error on 5110,6110,6200,7110 phones be sure that you using Dct-3 cable,
Dct-4 (6310) cable have different schematics and cannot be use with DCT3 phones.
3. Check if phone can communicate with box via M-Bus (info Button)
4. Make sure that box repowering phone, then press Check button, Left LED (Pwr)
Must switch off for 1 sec.
5. DCT-3 phones must power-up automatically then connect them to box, Box must be in
Dct-3Mode. Also Check must power-up DCT-3 phones. Then switching between DCT-3
and DCT-4 modes phones also most Power-Up then DCT-3 Selected.
Problem, Contact-Service on LCD
This error cause few reasons:
Firmware Checksum Error
1. Try to use slower Flash-Bus speed, Not all phones support FAST
2. Did MCU software version match PPM version?
3. If 3310 or 3410 phone, did you use last version of DCTx, With Erase hole option selected.
PPM area corrupted
1. Make UI defaults and Set Faid
2. Make Init Simlocks
3. Make Rebuild IMEI (after Rebuild IMEI must repeat steps 1 and 2)
4. If error still present try Flash PPM area with virgin PMM content (PPM= Eeprom area)
WARNING all original Radio setting, User Setting, IMEI will be lost, We highly recommend to
backup PMM before (READ FLASH). After PMM Flashing must do Rebuild IMEI and
steps 1, 2
Hardware Fault
N-Box By SarasSoft
Website: http://www.n-box.org
N-Box By SarasSoft
Website: http://www.n-box.org
Notes.
WD2 phones is slow in booting, so please be patient here, and dont
Do this steps to fast.
If phone dont enters Local mode then connected or after flashing,
Please check cable with schematics (BSI wire) here must be serial Resistor on BSI (3.3kom)
Here is described only most frequently common errors.
To make our support more effective, please report errors as described below.
When occurs some error, please report to us in this way:.
1. UFSx box serial number.
2.
OS (Windows), PC CPU speed, PC memory size, PC Brand.
3. Detail description of error:
Mobile Brand, software version
This error you have always, or only sometimes.
In which process phase error occurs.
Mobile was defect or working, before you have error.
4. Attach Result/Events window contents, then error occurs.
5. Attach screenshot of error situation
Results/Events window contents can be copied to clipboard using right mouse button menus,
(Text must be marked blue)
Screenshot can be done using SHIFT + PrintScreen Keys and paste to Paint Program. To reduce
image size Convert to .JPG format, this can be done using ACDsee software / Magic Convertor or
ZIP BMP file (Please Dont Use RAR)
This report for let us to better solve your problem,
Answer to your question and make software updates in shortest time.
Also please say to us which improvements in software you wish.
Thanks for your collaboration
N-Box SarasSoft
N-Box By SarasSoft
Website: http://www.n-box.org
To Activate Siemens FREIA for UFS (Note: No Support for this Software)
Support Email: support@n-box.org
N-Box By SarasSoft
Website: http://www.n-box.org
1. Run Freiaufs2_st.exe then click unlock button and you will get message on the screen at below
N-Box By SarasSoft
Website: http://www.n-box.org
Step 2: If you are successfull in erasing flash IC number 2, make a full flash
of the phone... MCU + PPM + Bluetooth if necessary.
Support Email: support@n-box.org
N-Box By SarasSoft
Website: http://www.n-box.org
Step 3. If you are successfull in full flashing the phone, put battery inside
phone and you SHOULD GET "Contact Retailer" message again. Now remove
the battery, put it back and hold buttons
"call(green button on the left)" + "*" + "3"
then press the power button while still holding the 3 buttons above...
The phone should start formating itself (note that there must be no sim
card inside the phone while doing this...)
After formatting, phone should be ok... but need to update a good PM
file if necessary.
Flashing WD2 Symbian 3600, 3650, 3660, 6600, 7650, 7610, 7610b, N-Gage, N-GageQD Phones.
N-Box By SarasSoft
Website: http://www.n-box.org
For WD2 Symbian like 3600, 3650, 3660, 7650, 6600, N-Gage and NGage QD this mention
models have COMBO flash for Chinese package.
For Normal MCU and PPM is same which All MCUs are end by C1 and some of them is C5
Example: MCU Nhl83050.8c1 and PPM Nhl83050.832 you have to flash both for English and
others language and for Chinese Package (COMBO FLASH) which are end by C2, C3, C4, C5,
C7, C8, C9 . You only have to flash at PPM area no need to flash on MCU to save your Time.
*COMBO FLASH MCu & PPM is build in one flash mean no Separate MCU or PPM for this
Chinese Version.
For C5 make sure Check the File size because there is also available C5 MCU for English Euro
version if the file size bigger is mean the file is for Chinese Firmware.
The first screenshot is flashing MCU and this above is Flashing PPM
Once finish flash it will POP-UP a windows as below screenshot..
N-Box By SarasSoft
Website: http://www.n-box.org
Warning!!!!!!!!!!!!!
This Function Can make your Phone become Contact retailer if you wrong use it.
Make sure you have you special cable or S.A.S to enable full factory reset to avoid from being
phone become Contact Retailer.
If the Software unable to reset factory it mean it become Contact retailer and if the Software
success to reset then your phone will be OK without any problem after flash.
This mostly needs on flashing for 3650 to v4.13 and above or 3660 (Some Phones)
NOTE: DO NOT CHECK ON Enable BT Flashing if you are flashing WD2 phones.
Is Recommended to Use Manual Flashing for WD2 Phones for flashing Chinese Version. Dont
use Start Button use Flash button which allow you to manual flash without UI setting. After
Finish Flashing then Manualy Reset or Format the phone by Pressing key on phone *#7370# and
the security code is 12345 (Original Code)
N-Box By SarasSoft
Website: http://www.n-box.org
For WD2 7610, 7610b is different then Others WD2 models there is no COMBO Flash for this
Model and you have to flash Both MCU and PPM . All MCUs are end by C1 or C2 Example
MCU = RH51PE404244.C2 PPM = RH51PE404244.90 this package is Dual language which
contain Chinese Simpl. And English for APAC .
Flashing DCT-4 Phones
To flash DCT-4 Phones Working Phone Connect cable and power on the phone then select
correct models, MCU & PPM must match with models and both MCU &PPM must same version.
Then tick/check on the UI setting that u wish to and after finish press start Make Sure Your Phone
Is Power on. To Flash Only PPM make sure you must use same version as the MCU sw of the
phone. If you dont know the phone version is better before done anything power on the phone and
press *#0000# to view the phone version or with SarasSoft just click info button and you will get
the MCU and PPM Version of the phone. Then select the PPM version and Click Flash.
N-Box By SarasSoft
Website: http://www.n-box.org
If the Phone is DEAD phone you have to USE manual flash.After select the MCU & PPM do not
click Start button u have to use manual flash which u have to click Flash button.
Above Screenshot is for flashing Only PPM for the phone which only you have to check/tick on
Enable Flashing at PPM check box. Be sure the version is same with MCU version, if you have
wrong flash to phone it will get Contact Service after flashing. To solve the Contact Service you
have to Re-Flash the phone once again and now you have to flash the both MCU & PPM.
CNT =Content Pack. This if you have check/tick on check box mean it will flash CNT to your phone.
CNT is the file which like Original Ringtone, WallPaper, Graphics, if you has failed to extract the
CNT your phone will dont have wallpaper, ringtone and etc in your phone menu Gallery folder.
Youalso can flash only .but is recommended to flash all again from start which Re-Flashin MCU ,
PPM and CNT to avoid any error. Below is the Screenshot which the DCT-4 phone have finnish
flashing successfully.
N-Box By SarasSoft
Website: http://www.n-box.org
N-Box By SarasSoft
Website: http://www.n-box.org
N-Box By SarasSoft
Website: http://www.n-box.org
N-Box By SarasSoft
Website: http://www.n-box.org
Run the UFSx_ATRZ .exe then you will see the software as the below Screenshot.
2) Selece the Brand as Z200 and Click GO button and the Idle will be change to Mobile Ready
and the GO button will change to Stop button. You will see in the software about the Phone info
which you have connected. The above Flash Lang will be change to Flash Cust and the below
Lang will be change toCust
3) After Finish Connect you have to select the Unlock File which are name
Z200_Cust_Std.bis or Z200_Cust_Virgin.bis at the open file on Cust
4) Open The Unlock file and select Z200_Cust_Virgin.bis as the file then Click Flash Cust.
5) It will look like the screenshot as below
N-Box By SarasSoft
Website: http://www.n-box.org
Then Press Init SecBlk and after that it will pop-up a window which to ask comfirmation .
If the Phone is auto Power Up you need to Press Cancel , If not you have to do it manually or
power on the phone and press Yes
The Pop-Up Windows will show the message as below.
Comfirm ,
If mobile does not power on automatically, Follow the instruction:
1. Power On Mobile, If it does not power on then
2. Reattach Battery and Click Yes.
Unlock Done,
In the Software Screen will show
CST Flashing Done, Time: 00:06
Restarting.
Init Done, Time: 00:04
All Done , Total Time: 01:00
(Your Phone have been unlocked and can be use with any operator.)
N-Box By SarasSoft
Website: http://www.n-box.org
Click Mobile info then you will get the phone information , then click Unlock Button to unlock
your Phone.(Make Sure you have Select the Correct Models when unlock.
Read Flash: You can Read flash file from Samsung Phones to save as backup by Clicking Read
Flash button make sure dont attach battery when read the flash and make sure you have select the
correct models if not it will unable to read the phone due to loader different.
Write Flash: You can write flash by Clicking Write Flash button. Do not attach battery when
flashing. You may use original Samsung Flash file with this Software or you can download the flash
file from our Support FTP
Note: You can Use the A300 cable for Flashing and Unlocking for almost all models and Make sure
Do not Attach Battery when Reading /flashing the phone only attach battery for some Phones when
you unlock the phones.
For Support FTP your Login is your Box Serial Number and Password which is stick in your box .
N-Box By SarasSoft
Website: http://www.n-box.org
2. Select T310/T312 phones, select Mcu and Gdfs files, uncheck Protect Sa Then Flashing Gdfs .
3. Flash phone with desired MCU and GDFS (after flashing the GDFS the IMEI will be change)
4. Disconnect the phone, and connect again. Press "GO", after Boot phone, press "Restore sa". Now
you be in
backup folder, choose the file IMEI same of the phone. Now the phone flashing.
N-Box By SarasSoft
Website: http://www.n-box.org
5. Disconnect the phone, than connect again. Press "GO", to boot the phone, press "Init SecBlk",
now coming "IMEI Restore", if your IMEI not match need to type it, press "OK",
To Unlock Others Se phone The button Init SecBlk is mean Unlock button. After connect the
phone to the software click Init SecBlk
For Flashing SE Phones , Some phones need to flash MCU and Modem and Some only Need
Modem depends to the phone Type. There is Two Software For SE models which are ATRZ and
RTP.
To flash Phone Select the desire flash file or modem then click on the Flash MCU or Flash
Modem or Flash GDFS Make sure the phone is already connected with the software.
Once finish flashing it will show on screen ALL Jobs is Done. Then you can press Stop button and
remove your phone from the cable.
Repair T230 4 Locks Closed.
Step 1
Remove "Protect sa Than Flashing GDFS" the click,
Choose the GDFS file,
Press "GO" Button.
(After flashing the GDFS the IMEI will be change)
Step 2
Disconnect the phone, and connect again,
Press "GO",
After Boot phone, press "Restore sa",
Now you be in backup folder,
N-Box By SarasSoft
Website: http://www.n-box.org
If you have any problem or any suggestion for this user manual you can contact us at
http://www.n-box.org
Lot 2975,Plot 6,Block 10,Ground Floor
3rd Miles,Jalan Tun Ahmad Zaidi Adruce,
93150 Kuching, Sarawak, Malaysia
Tel: 60-82-242424 Fax: 60-82-420187
Email: sales@n-box.org
Support Email: support@n-box.org
Support Forum: http://www.iphone-forum.org
www.n-box.org 2004
Support Email: support@n-box.org