Sei sulla pagina 1di 15

No.

EQUIPMENT

QTY

COMPANY SPECIFICATIONS

A. Rig Equipment and Accessories


1. General
Mobile self-contained core drilling rig,
Specification
capable for drilling minimum 900 m PQ Size.
With sufficient working platform height to
accommodate minimum 11 3000 psi BOP
(Annular and Single Gate Ram) and flow line.
Must be able to safely and efficiently operate
on a well pad no greater than 60m x 60m.
2.

3.

4.

Drill Mast

Power Pack

Pull Out and


Hoist

Fully welded lattice construction with min 11


m working height, complete with hydraulic
raising system. This mast should be capable
to support depth required plus adequate
overpull. min head traverse length is 7.5m

CONTRACTOR SPECIFICATIONS
Please include equipment manufacturer and
model number
ManufacturerLian Yungang HuangHai
Mechinery Factory Co.,Ltd
HCR-8 mobile self-contained all hydraulic coalbed gas drilling rig,
drilling depth:NQ:3000m;HQ:1600m;PQ:1300m
The height of platform is sufficient for 11"
3000psi BOP and flow line. This smart rig can
operate on a well pad smaller than 60m x 60m.
Manufacturer : Lian Yungang HuangHai
Mechinery Factory Co.,Ltd

EQUIPMENT
LOCATION

China

The maximum stroke of the top head drive is


11.6m, capable to support depth required plus
adequate overpull, hydro cylinder arranged on
both sides of the mast. Min head traverse length
is more than 7.5m.

Must be sufficient to provide rational and


hoisting capabilities to the rigs maximum
rating, this engine c/w remotely operated
emergency shut off and thermal cover at
exhaust. Noise suppression must provide a
working environment that complies with
Indonesian standards.

Manufacturer : Lian Yungang HuangHai


Mechinery Factory Co.,Ltd

Minimum 11 m haul winch travel and 14 m


usable rope length. Minimum hoisting
capacity 40.000 Kg, min sped 1m/sec.

Manufacturer : Lian Yungang HuangHai


Mechinery Factory Co.,Ltd

China

WP12.375.
368HP/2100r/min, which is sufficient to the rigs
maximum rating. Independent power for moving
and working.
This engine c/w remotely operated emergency
shut off and thermal cover at exhaust.
Noise suppression matches with operation
requirement.
China

Minimum 11 m haul winch travel and 14 m


usable rope length.
Rig maximum hoisting capacity24.000 Kg;
Minimum lifting speed is more than 1m/sec.

5.

Wire Line

Wire line drum capacity should be capable


for accommodate min 1200 m with 8 mm

Manufacturer : Lian Yungang HuangHai

China

rope, hoisting capacity min 2500 kg bare


drum or 850 kg at full drum, 4 m / sec
hoisting speed.

6.

Rotation drive
head

Must be Top Head Drive capable to supply


800 Rpm and up to 3000 lbft of torque. It
should be complete with floating spindle
incorporation an API pin down shouldered
connection. Top drive must have at least
7.5m travel while being able to transmit
maximum torque and hoisting ability. Torque
limits must be able to be set and indicators
displayed on the drilling console.

7.

Make up /
Break out

Rod tong to make and break all slim-hole


casing and drill rod sizes to their correct
torque without damage.
Adequate drill pipe tongs and back up lines
fitted with line pull or torque gauges to allow
for the make up and break out of all the
contractors rotary shouldered API tubular.
Recommended table opening of 17 1/2 with
30,000kg static loading. Bushings and slip
segments to support all contractors API
rotary tubular and operators standard casing
sizes. Hydraulic slip table to support all
contractors slim hole tubular.

8.

Table

Mechinery Factory Co.,Ltd


Drum capacity:2000m
Hoisting capacity: 1500kg,
Hoisting speed: max 4m/s
Wire rope OD: 7mm
Manufacturer : Lian Yungang HuangHai
Mechinery Factory Co.,Ltd
Max. continuous output torque: 7200N.m
Arrangement of rotary speed : 01250rpm
Hydraulic drive; drift diameter for center
pipe:121mm
Max. pressure for mud system: 35MPa
Hydraulic power swivel is driven by2 set
hydraulic motor, and to drive center pipe
through slowdown.
Manufacturer : Lian Yungang HuangHai
Mechinery Factory Co.,Ltd
The torque of rig for making up and breaking
out pipes is 24kNm.
Hydraulic power Tong can make up and break
down all kinds of API tubular.
Manufacturer : RG Gruop Co.,Ltd (Brand new)

China

China

China

Maximum table opening of 30,c/w hydraulic


clamp which can supporting all kinds of API
tubular and casing.
Static loading:80,000kg
Table height: 3.8m

9.

Survey Tool

10
.

Fuel supply

11
.

Crane / Forklift

Totco or Magnetic Single Shot wireline


conveyed survey tool, crows foot and
associated spare parts and consumables.
Certified and bunded fuel storage tanks with
sufficient capacity to operate rig and
equipment for 7 days of normal operation.
Day tanks as necessary complete with
necessary appropriate piping and pumps to
safely transfer fuel.
Suitable crane or forklift to be able to handle
and position all of the contractors, and
operators equipment.

Manufacturer: Lian Yungang HuangHai


Mechinery Factory Co.,Ltd

China

17.5m fuel tank complete with necessary


appropriate piping, pump and flowmeter.
25T crane,be able to handle and position all
equipment.
Rental in Indonesia

Indonesia

B.

Mud and Circulating Equipment

1.

Coring Pump

Triplex pump, FMC or similar, capable to


supply 20 200 lpm at 1500 Psi c/w
sufficient diesel engine or hydraulic motor,
this pump complete with safety pop off valve
and appropriate pressure gauge. Must be
able to be operated from driller console.

2.

Mud Pump

Min 400 HHP, Skid mounted triplex pump,


piston type, transmission & variable speed
drive, capable to supply min 6 BPM capacity
and 2,000 psi working pressure. Complete
with appropriate diesel engine. Must be able
to be operated from driller console
Also including :
Appropriate Pressure gauge
Safety pop off valve
Return line to tank
Discharge line
Spark arrester covered by thermal cover
Safety chain for line connection
Can be operated from driller console
Centrifugal charging pump

3.

4.

Mud Tank

Mud Cleaning

Manufacturer: Lian Yungang HuangHai


Mechinery Factory Co.,Ltd
BW320 Horizontal triplex reciprocal single
acting piston pump, be able to be operated from
driller console.
Hydraulic drive, stepless speed regulating
Rate of flow(l/m) 0-32L
Working pressure:10MPa
Manufacturer: Shandong rongli machinery
factory
RL3NB-500 triplex single acting pump , skid
mounted.

China

China

PWR:500HP; Length of stroke100mm and


170mm discharge volume: 10.39-30.10L/s
Pump speed 120; Gear ratio 4.696; Max.
pressure 35MPa
Outside dimension : 335022852085mm;
Weight:10T;
Diesel engine12V135BZLD1
Other parameter meet the requirement and
specification.

Min 150 bbls capacity, 3 compartments, c/w


circulating lines, mud agitator, mud mixing
hopper. Appropriate graduated trip tank with
level gauge visible from the drillers console.

Manufacturer: tangshan.guanneng machinery


factory

Min 1 unit linier motion shale shaker capable


of handling 400gpm of polymer drilling mud
Single cone desander and multi cone desilter
with mission style centrifugal pump.

Manufacturer: Tangshan Guanneng Machinery


Equipment Co.,Ltd

China

3 sets of 8000x2300x2300mmmmMud Tank c/w


circulating lines, mud agitator, mud mixing
hopper.

Double shale shaker capable of handling


400gpm of polymer drilling mud.
Mud cleaner, agitator, desander+desilter match
the operation requirement.

China

5.

Circulating
system

All circulating lines to be min 2000psi


working pressure with welded or NPT fittings.
All shock hoses to be manufactured to API
7K

Manufacturer: Shandong rongli machinery


factory
All circulating lines working pressure is 5000 psi
,and accord with API standard.

China

6.

Transfer Pump

3 trash pump or flex drive submersible pump


to be used as a supply or cellar drain pump.
Adequate suction and delivery hoses to suit
the operation.

Manufacturer: tangshan guanneng machinery


factory

China

Submersible trash pump matches the operation


requirement.
Provide adequate suction and delivery hoses.

7.

Test Kit

Basic mud testing apparatus consisting of


minimum-measuring cup, marsh funnel and
mud scale.

Manufacturer: Qingdao Xinrui petroleum


mechinery Co.Ltd. (Brand new)

China

Mud testing kit at working site : kit A+kit B,


including measuring cup, marsh funnel and mud
scale ect
C. Cementing
1. Cement Unit

2.

Cement Head

3.

Water Tank

As
Reqd.
1

Appropriate batch mixing cement unit, 15m3


capacity complete with two separate mixing
tanks with agitators and HT400 style triplex
mixing and cementing pump.
All suction and high pressure Chiksan
delivery lines to enable delivery to the rig
floor.
Suitable circulating swages and single plug
cementing heads to fit the Operators planned
casing strings.
20m3 water tank for mixing and
displacement.

Rental in Indonesia
Single pump cement truck 45-21, pressure :
45Mpa, displacement : 21l/s, include air
compressor

As Reqd.
Manufacturer: tangshan guanneng machinery
factory

Rental in Indonesia
China

500023002100mm water tank.

D. Drill String Equipment Rotary Drilling


1.

Drill Bits

As Reqd.

Soft to Medium Tri Cone or PDC drill bits to


match the operators planned hole sizes.
Adequate back up bits should bits not reach
the target depths.

Manufacturer: jianghan bit factory

China

Model : SWT127, HJ517G, GA114


Match the operators planned hole sizes.

2.

Drill Collar

30

Spiral type, 6-1/4 OD spiral, Range 1 with


API shouldered connection. All DCs

Manufacturer: Tianhe Oil Group Co., Ltd .(Brand


new) or equal

China

completed with steel thread protectors as


well as recesses for slips and elevators.

Length : 3m (30jt)
Size : 4 1/2"
Connection : NC38
Matches the API standard and operation as
required.

3.

Drill Collar

12

4.

Drill Collar

12

5.

Drill Pipe

650M

6.

Drill Pipe

800M

7.

Stabilizer

8.

Stabilizer

9.

Stabilizer

10
.

Stabilizer

11
.

Stabilizer

12
.

Substitutes

As
Reqd.

4-1/2 OD, Spiral type, with elevator recess,


Range 1 with 3-1/2 IF Connection.
3 OD, Spiral type, with elevator recess,
Range 1 with 2-3/8 REG Connection.
3-1/2, 13.3 PPF, API Grade G-105 3-1/2IF
connection, premium class 1 with metal
thread protectors. Hardbanding on Drill pipe
are smooth hardbanding. Complete with
current API RP 7G inspection report.

2 7/8, 10.4 PPF, API Grade G-105 2-7/8IF


or AOH connection, premium class 1 with
metal thread protectors. Hardbanding on Drill
pipe are smooth hardbanding. Complete
with current API RP 7G inspection report.
Integral blade 8 3/8 OD String Stabilizer. API
connection as per 6 1/4 drill collars.
Integral blade 6 1/16 OD Near Bit Stabilizer.
2 7/8 REG x 3 IF API connections, or as
per 4 3/4 drill collars.
Integral blade 6 1/16 OD String Stabilizer. 3
1/2" IF API connection, or as per 4 3/4 drill
collars.
Integral blade 4 11/16 OD Near Bit
Stabilizer. 2 3/8 REG x 2 3/8 REG
connections, or as per 3 drill collars.
Integral blade 4 11/16 OD String Stabilizer. 2
3/8m REG connection, or as per 3 1/2 drill
collars.
Appropriate crossover subs, manufactured to
API standards, to allow for interchanging of

Manufacturer: Tianhe Oil Group Co., Ltd .(Brand


new) or equal

China
4-1/2 300m

Length : 3m
Size : 3-1/2"
Steel grade: G105
Connection: 3 1/2 " IF with18shoulder.
Matches the API standard and operation as
required.
12-1/4

8-1/2

all of contractors downhole tools.


All bit subs must include a float recess to suit
the contractor supplied float valves.
Saver sub MUST be installed on the top
drive quill shaft at all times and adequate
spare subs be maintained at all times.
13
.

Pipe Dope

A.
1.

Drill String Equipment-Core Drilling


PQ Drill Rods
800m
PQ (PHD) drill rods in 3m or 6m lengths.
Outer diameter 114.3 mm (4.50 in) Inner
diameter 101.6mm (4.00 in). Joint min yield
strength-621 MPa (90,000 psi), min tensile
strength 724 MPa (105,000 psi).
NOTE : Standard HWT casing is NOT
recommended for use as drill rod and will not
be accepted.
Certificates of the pipes manufacture and
inspection history will be required.

2.

HQ Drill Rods

As
Reqd.

1200m

Lead-free copper based API pipe dope to be


used on all rotary-shouldered connections.
All tubing and casing to be run with API
modified dope with friction factor of 1.

HQ drill rods with surface hardened thread


profile in 3m or 6m lengths. Outer Diameter
88.9mm (3.50), Inner diameter 77.8mm
(3.06). Joint min yield strength-621 MPa
(90,000 psi), min tensile strength 724 MPa
(105,000 psi).
Certificates of the pipes manufacture and
inspection history will be required.

Good unctuosity; insure the antiwelding ability


and easy to unscrew at high temperature. Easy
to unction the screw thread again.

Indonesia

Manufacturer: TangShan JinShi Super Abrasive


CO.,LTD(Brand new) or equal

China

PQ Drill rods lengths: 3m,1100m.Outer


diameter -114.3mm (4.50") .Inner diameter
101.6mm(4.00") .Min yield strengthand min
tensile strength meet the requirements.
Certificates of the pipes manufacture and
inspection history will be provided as required
by company.
Manufacturer: TangShan JinShi Super Abrasive
CO.,LTD(Brand new) or equal
HQ Drill rods lengths: 3m,1600m.Outer
diameter88.9mm(3.50").Inner diameter :
77.8mm (3.06") .

China

Min yield strength and min tensile strength


meet the requirements.
Certificates of the pipe's manufacture and
inspection history will be provided as required
by company.

3.

Coring
Equipment

2 sets
PQ3
2 sets
HQ3

2 complete sets of 3m and 6m HQ3 and PQ3


core barrels, inner tubes, head assemblies,
reamers, overshots and handling tools.
Complete spare parts and consumable
package for the above equipments as
recommended by the manufacturer.

Manufacturer: TangShan JinShi Super Abrasive


CO.,LTD(Brand new) or equal
3m HQ3 core barrels 3 sets
3m PQ3 core barrels 3 sets

China

Provide 3 complete sets of 3m and 6m HQ3 and


PQ3 core barrels, inner tubes, head assemblies,
reamers, overshots ,handling tools and
adequate spare consumable parts for the
above equipments.
4.

Core Bits

PQ3
and
HQ3

Suitable core bits to drill the well to TD in soft


to medium formations.

Manufacturer: TangShan JinShi or equal

China

Super Abrasive CO.,LTD(Brand new)


Core bit: PQ3,HQ3

Meet the requirement of drilling in the soft to


medium formations
B.
1.

Handling Equipment
Elevator
As
Reqd.

Need to demonstrate the rigs ability to safely


pick up, make up and drill with API drill pipe
and drill collars.
While hoisting drill string it must be done by
using elevators or directly connected to the
top drive using an appropriate crossover.
All drill collars to be handled using certified
lifting nubbins or elevators.

Manufacturer: Jiangsu Rudong(Brand new) or


equal

China

Size: 2-7/83-1/24-1/2"
Type: Center latch
Load Capacity:150T
The demonstration of the rigs ability to safely
pick up, make up and drill with API drill pipe and
drill collars will be provided as required.
Use the elevators as required.

2.

Safety Clamp

As
Reqd.

Safety clamps must be used on drill collars at


all times.

Manufacturer :Jiangsu Rudong(Brand new)


Provide the safety clamps in accordance with
the drill string .
Quantity:2

Size 1-1/8"-4-1/2"

Using safety clamp as required by company .


Safety clamp meet API specifications.

China

3.

Casing
Handling

As
Reqd.

Single lift elevators to be used whenever


hoisting joints of casing above the rig floor.
When suspending the casing string it must
be connected to the top drive using an
appropriate crossover.
Casing to be supported using API slips and
spider if possible.

Manufacturer :Jiangsu Rudong(Brand new)

China

Size: 9-5/8,7,5" ,4-1/2"


Type: Center latch
Load Capacity: 90T
Perform the services according to the drilling
industry practices.

4.

Casing Tong

A suitable means of making up the operators


casing to the correct torque must be
provided. (This may incorporate using the
Top Head Drive if it can be demonstrated that
the operation can be performed safely and to
the correct specifications.)
Tong must have adjustable torque settings
and sufficient contact area so as not to
damage the casing. Must also have the
ability to back up the stationary joint as well
as be able to break out the casing if required.

Manufacturer :Yancheng Teda Drilling and


Production Equipment CO., ltd(Brand new)

China

Rated pressure:2000psi
Rated oil delivery:120L/min
Rated torque: 35kNm with Torque Gauge
Provide adjustable torque settings and sufficient
contact area for tong.
Have the ability to back up the stationary joint
and break out the casing.
13 3/8

5.

6.

Coring

Slings

As
Reqd.

C. Well Control Equipment

All required wrenches, support, core


recovery equipment and suitable working
table to safely remove and handle the core
from the inner tube.
All slings (lifting & pulling slings) shall meet
industry standard c/w certificate & load
rating.

Manufacturer: TangShan JinShi

All slings and chains (lifting & pulling slings)


shall meet industry standard c/w certificate &
load rating.
A policy MUST be in place to periodically
inspect and replace slings and chains as
necessary.

Manufacturer :Jiangsu Rudong(Brand new)

China

Super Abrasive CO.,LTD(Brand new)


Provide wrenches, Supports ,core recovery
equipment and suitable working table .
All slings meet industry standard c/w certificate
& loading rating.

All slings and chains shall meet industry


standard c/w certificate & load rating.
Make a related policy to inspect them
periodically.

China

1.

Diverter

1 ea

2.

Blow Out
Preventers

1 ea

11 diverter system. May consist of annular


BOP and 3 vent line.
7 1/16 3000 psi single ram and annular BOP
manufactured by an API certified
manufacturer. Complete with valid Migas
Certificate.
Note: Contractor must maintain a complete
inventory of spare rubber parts and elements
for the above equipment at all times.

Manufacturer :Yancheng Sanyi Petrochemical


Machinery Co.,Ltd.(Brand new) FZ18-21,
FH18-21rental, 35-35BOP

China

Size: 7 1/16"
Working Pressure (psi): 3000 psi
Provide 4-1/2", 3-1/2" and 2-7/8" rams and
annular rubber core

3.

Trip Tank

Appropriate graduated trip tank with level


gauge visible from the drillers console.

Manufacturer :Shandong Rongli Petroleum


Machinery Co.,Ltd(Brand new)

China

Provide graduated trip tank with level gauge


4.

5.

6.

Lifting Slings

Koomey
(Control Unit)

Choke Manifold

As
Reqd

Dedicated lifting slings or chains for use on


the BOPs must be provided with current
inspection certificates.

Manufacturer :xianyang baoshi Petroleum


Machinery Co.,Ltd

Type 80, 3000 psi accumulator system with


sufficient usable fluid volume and control
stations to close and hold BOPs on open
hole and open the HCR w/o assistance from
charging system and still have 1500 psi
remaining after functioning. The system must
be capable closing individual component
within 30 seconds or less, equipped with
both electric and pneumatic charging pumps
system with sufficient pump size to build
pressure in shorten time (less than 15
minute). Independence Air Compressor
attached to closing unit skid.
A remote control panel must be placed near
the drilling console.
2-1/16 3000psi manifold with flanged
components built to API Spec 16C c/w
2 (two) manual adjustable chokes, 3000
psi, all assembly are flange type
connection and welded type joint nipple
2 (two) Steel gate valves in the choke line
at Drilling Spool, one must be

Manufacturer :Yancheng Sanyi Petrochemical


Machinery Co.,Ltd.(Brand new)

China

Dedicated lifting slings or chains' inspection


certificates will be provided as required.
China

Model: FK125-2
The electrical pump rate-flow:20L/minX1
The pneumatic pump rate-flow:60L/strokeX1
The accumulator system meet the requirements
and specifications.
Provide driller's control console for remote
control.
Manufacturer :Yancheng Sanyi Petrochemical
Machinery Co.,Ltd.(Brand new)
Model:JG52/21
Connection :flanged

China

7.

Safety valves

As
Reqd.

hydraulically operated
2 (two) Steel Gate valves between both
chokes and one at the cross
1 (one) gate valve at each downstream of
both chokes
Blooey line which run straight through the
cross and is isolated by a steel gate valve
and swedge outlet line size 2 to 3 flange
connection at 50m in length
Includes a valve isolated pressure gauge
which can display the casing pressure
within view of the choke operator

Size :2-1/16"

Full opening safety valves and appropriate


crossovers required for each pipe size to be
used.
API kelly cock to be installed on the top drive
quill at all times.

Manufacturer : Yancheng Sanyi Petrochemical


Machiery Co.,Ltd.(Brand new)

Working pressure : 3000psi


Meet API Spec 16C
The choke manifold meet the placing
requirements provided by company at least.

China

Size: 2-1/16"
Working pressure:3000psi
Connection: 3 1/2IF
Using the safety valves and crossovers as
required.

8.

9.

Wireline
Stripper

Float Valves

As
Reqd.

Guiberson wireline stripper to be used at all


times when pulling the core barrel.
Appropriate crossovers, pump in tee and
pressure gauge to be include.

Manufacturer :TangShan JinShi Super Abrasive


CO.,LTD(Brand new)

Float valves must be included in all open


hole drilling operations.

Manufacturer :Tianhe Oil Group Co., Ltd .(Brand


new)

Keep the wireline in good condition and provide


Apporiate crossover, pump in tee and pressure
gauge.

Type: spring
Working pressure: 3000psi
Install float valves in all open hole drilling
operations.
10

Drilling Spool

11 3,000 psi Drilling spool complete with 3-

China

FS35-35 2-9/16"

China

1/8 outlets.

11
.

Gas Separator

D.
1.

Fishing Tools
External
Engagement
Tools

As
Reqd.

Poor boy gas separator to allow the


circulating of gas cut mud back to the mud
system while venting any hydrocarbons.
Bowen 150 or equivalent overshot for each
hole size and the correct grapples, pack-offs
and controls to fit each of the contractors
tubular.

Manufacturer :Tianhe Oil Group Co., Ltd .(Brand


new)

China

Provide the tools equivalent to Bowen 150


Type: self-releasing overshot, box bell
Size : 2-7/8",3-1/2",4-1/2 etc.
2-7/8 Prabu

2.

Internal
Engagement
Tools

Itco releasing spear and slips for each of the


contractors slim hole drill rods.

Manufacturer :Tianhe Oil Group Co., Ltd .(Brand


new)

China

Pin bell for drill string: 2-7/8",3-1/2", 4-1/2"etc.


In addition,provide Itco releasing spear and slips
for slim drill rods.

3.

Impact Tools

As
Reqd.

4.

Milling Tools

5.

Internal cutters

As
Reqd.
2

6.

Side Track
Tools

As
Reqd.

7.

Crossovers

As
Reqd.

E.
1.

Electrical Equipment
Generator
1+1

Ability to source and provide Bowen Type Z


fishing jars and accelerator if deemed
necessary.
Flat bottomed junk mill for each hole size.
Hydraulic pipe cutters for the contractor slim
hole drill rods.
Equipment required to perform open hole
side track in open hole should rods become
stuck. Contractor may show evidence of
tools being available with short notice if not
being kept on the rig site.
Correct crossovers built to API specifications
for each of the fishing tools back to the
contractors tubular.

Sufficient to provide reliable power source to


all of the rig and third partys equipment.

Hydraulic jetting

Manufacturer :Tianhe Oil Group Co., Ltd .(Brand


new)

China

Provide crossover for each size of the fish tools


in accordance with API specifications
Manufacturer kangda

China

Power supply must be 220-240 V, 50-60 Hz.


The drilling plant MUST comply with
relevant Electrical installation standards
IEC 79-1, 79-7 or 79-11.
Adequate spare parts to ensure minimum
down time.
Provision or access to a reliable back-up
system within 24hrs MUST be demonstrated
in cast of primary generator failure.
Noise suppression must provide a working
environment that complies with Indonesian
standards.

Model:C15 for drilling rig


Power :320KW/100KW
Model : Olympian GEP150/108KW for campsite
Power :108KW
The drilling plant comply with relevant Electrical
installation standards IEC 79-1,79-7or 79-11.
Providea reliable back-up system within 24hrs
and adequate spare parts ensure minimum
down time.
Noise suppression complies with Indonesian
standards.

2.

F.
1.

Lighting

As
Reqd.

Explosion-proof system where applicable


with sufficient lighting for rig and drilling site
to provide for safe 24hrs operations.
Emergency lighting must be provided at
critical areas is koomey, and well control
stations.
Safety Equipment
Harnesses
2
Climbing Harnesses complete with leg and
Shoulder straps manufactured to an
international standard. Both must be in good
condition and available at the derrick at all
times. Damaged or worn harnesses are to be
destroyed and replaced with new harnesses.

Explosion-proof system where applicable with


sufficient lighting for rig and drilling site to
provide for safe 24hrs operations. Emergency
lighting provided at critical areas is Accumulator,
and well control stations.

Double adjustable two node safety belt (with


positioning belt): HA044

China

Indonesia

API load rating: 150MT


Feature : easy positioning, comfortable wearing
Safety belt meet the international standards.
Keep the harnesses at the derrick in good
condition and available. Make a related policy to
manage the harnesses.
Purchase in Indonesia

2.

Fall Arrest

Fall prevention device manufactured to an


international standard, matched to derrick
height and installed on the derrick.
Counterweights are not acceptable. These
devices must be tested weekly and be

Provide related fall prevention device and


inspection as required.
Meet the international standard.

Indonesia

3.

Fire
Extinguisher

As
Reqd.
(min)

repaired or replaced whenever necessary.


Any time the device is used to arrest the fall
of a person, it must be immediately removed
from the derrick and sent to the manufacturer
for repair/recertification.
9 kg ABC type fire extinguisher complete with
working pressure gauges.
150# Dry powder type fire extinguisher class
BC
25# CO2 fire extinguishers.
90 Ltrs foam fire extinguishers

Make a related policy to manage the fall


prevention devices.
Purchase in Indonesia.
Fire pump

Indonesia

Model:XBC3.2/20-100vs
Displacement :14L/S
Fire hose :30m
150# Dry power fire extinguisher
25# CO2 fire extinguishers.
99Lfoam fire extinguishers.
Provision as required to meet contractors
insurance and local regulatory requirements.
Purchase in Indonesia.

4.

5.

Gas Detector

First Aid

As
Reqd.

Multi-gas detector c/w all standard


accessories for detecting methane, H2S and
CO2, digital sound alarm complete w/
charger & approved by authorized agent.
Contractor responsible to perform calibration
as per manufacturer recommendation.

Manufacturer :aofang Petroleum Machinery


Co.,Ltd(Brand new)

Comprehensive First Aid kit c/w snake bite kit


suitable for remote operations.

First aid kit in accordance with company's


requirement.

China

Four in one portable gas detection instrument.


Be responsible to perform calibration as per
manufacturer recommendation.
Indonesia

Purchase in Indonesia.
6.

Recovery

Stretcher as per CPI standard: light weight,


durable, folded type, can be used to bring the
patient from high elevation, fit the space at
dog house & rig medical room. It shall be
completed with four body straps and bride
sling (pole stretcher is not acceptable)

Stretcher
Size : 185*52*23cm
Weight :5 kg
Load-bearing capacity : 159KG
Stretcher meet CPI standard.

Indonesia

Purchase in Indonesia.
7.

General safety

All PPE as per local requirements.


Windsock
48 Bug Blower c/w electric cable sufficient to
place anywhere in immediate rig area 30 min
Self Contained Breathing Apparatus Burn
pack
Portable eyewash one located in mud
mixing area, one located in mud storage
area.
Fire exe
Serviceable vehicle for crew transport.
Warning sign in Bahasa & English.

Approved type safety helmet for every person


working in the rig and sufficient approved
protective equipment such as eye protectors,
ear protectors, welding masks or goggles,
welding aprons, gloves, overalls, safety
boots,etc.

Indonesia

Provide eyewash and fire-axe.


Vehicles forcrew transport
Warning sign in Banasa & English
Purchase in Indonesia.

8.

Security

As
Reqd.

Small portable shack for entrance security


gate & access control post c/w electric lamp
and explosive proof.
Note: Refer to FSWP requirement and
completed with : Bulletin board, Rompi, Lash
light, Plastic Chain, Yellow Line, grounding
system, 5 pr cotton hand glove, 5 ea safety
head, 5 safety glasses, 5 ea ear plug and 15
pcs visitor badge

K.Site Buildings
1.
Company
2
Porta-camps for Company Supervisor(s)
man /
completed with office, toilet facilities, running
Rig Manager
water, air conditioning, water heater and
sleeping accommodations. Contractor shall
provide same for Contractor Rig Manager
and other contractors personnel who are
required to stay at rig site. All porta camps
shall be completed with proper heat & noise
insulator.
Separate phone and internet lines to be
provided to each building.
2.

Rig Site

Suitable mess area complete with hygienic


ablution facilities, running water, water heater
and air conditioning.

Provide entrance security gate, explosive-proof


lamp and other related security equipment as
required.

Indonesia

Purchase in Indonesia.

Porta-camps for Company Supervisor(s)


completed with office, toilet facilities, running
water, air conditioning, water heater and
sleeping accommodations. Contractor shall
provide same for Contractor Rig Manager and
other contractors personnel who are required to
stay at rig site. All porta camps shall be
completed with proper heat & noise insulator.
Separate phone and Internet lines provided to
each building.

Indonesia

Purchase in Indonesia.
Suitable mess area complete with hygienic
ablution facilities, running water, water heater
and air conditioning.
Purchase in Indonesia.

Indonesia

3.

Rig Camp

As
Reqd.

Capable of accommodating all contractors


rig personnel complete with hygienic ablution
facilities, running water, water heater, air
conditioning, laundry facilities, kitchens and
sleeping accommodations.
Contractor shall provide Water treatment
facility and waste handling facility.

1 Office room, 2 two-room, 4 four-room,

Indonesia

2 eight-room, 1 kitchen, 1 bathroom(the camp


completes with the facilities as required )
Provide water treatment facility and waste
handling facility.
Purchase in Indonesia.

4.

Waste
Management

As
Reqd.

Suitable waste storage and transportation


services to ensure a clean and safe work
environment.

Store and transport the waste and ensure the


environment clean and safe.
Purchase in Indonesia.

Indonesia

Potrebbero piacerti anche