Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
com
CorelDRAW
Help
the entrepreneurial
magazine for
CorelDRAW
users worldwide
J uly 2009
Uni sub
Si l ver f or Phot os
Using CorelDRAW:
Cleaning Up Bitmap Artwork
CorelDRAW Applied:
Imposition Layout for
Full-Color Image Transfers
Inside Color:
Color Correction is Just
the Beginning
Getting Ahead:
Is Auto Digitizing for You?
NEXT FULL SCREEN CONTENTS
July 2009 Help CorelDRAW
2
Click ads to go directly
to advertisers web site.
BACK NEXT FULL SCREEN CONTENTS INFO SPONSORS
July 2009 3
Click ads to go directly
to advertisers web site.
Help CorelDRAW
Inside ACDRP
By Mike Neer,
Executive Director
Gain Another Perspective
Published by Association of
CorelDRAW Professionals
President: J ohn H. McDaniel
Vice President: J udith McDaniel
Executive Director: Michael R. Neer
Assoc. Exec. Director: Steven V. Neer
ACDRP Corporate Offce: Albany, OR
OFFICES
Membership & Publishing offces located at:
4549 N. Glenn, Suite 110,
Fresno, CA93704;
800-276-8428, 559-276-8494 Fax 559-222-1390
www.CorelDRAWHelp.com
editor@coreldrawpro.com
Subscriptions: Free to qualifed individuals and
businesses. Send change of address to the above.
ACDRP Membership: $60/yr., See the website
for details. Includes exclusive content and more.
Advertising: Request a Media Guide or download
it from www.CorelDRAWHelp.com.
Writers: CorelDRAWPro accepts articles from
industry experts. Email publisher for details.
Copyright 2009 by ACDRP.
All Rights Reserved.
EDITOR / PUBLISHER Michael R. Neer
mikeneer@coreldrawpro.com
GRAPHICS J ohn Mise
ADVERTISING J ohn McDaniel II
jhmcdaniel2@coreldrawpro.com
541-990-6687
JULY 2009
Help CorelDRAW
1.888.437.4564 sales@epiloglaser.com
From creating unique projects like architectural
models to engraving on high-tech gadgets, our laser
systems provide a wide variety of capabilities. Create
all the products you see here with one very versatile
laser system.
Visit www.epiloglaser.com/coreldrawpro.htm for more information!
Tech tattoos are just
the beginning...
Zing 24, 30-60 watt laser - 24" x 12" engraving area
Works like a printer - USB or Ethernet connection
Engrave on almost any surface
Easily cut wood, acrylic, plastic and much more
Just import an image and print
it to the laser
All it takes
is one idea.
Zing 16 Systems Starting at $7,995!
The New Zing 24 Laser System
BACK NEXT FULL SCREEN CONTENTS INFO SPONSORS
July 2009 Help CorelDRAW
5
Click ads to go directly
to advertisers web site.
July 2009
Magazine Sponsors Logo-Links
Tour Sponsors Logo-Links
Corel Corp. Web Ad
Custom Graphic Technology Web Ad
Epilog Laser Corp. Web Ad
Geo. Knight & Co. Web Ad
John E. Lepper Inc. Web Ad
Johnson Plastics Web Ad
LaserSketch Web Ad
N&R International Web Ad
Paramount Services Inc. Web Ad
ProLink Graphics Web Ad
SPONSOR INDEX
DEPARTMENTS
Click Web to go to sponsors website.
Click Ad to go to the ad in this issue.
Clicking the ad itself will go to website.
LEARN! Apply! GROW!
3 Inside ACDRP:
Gain Another Perspective
6 Graphics News Wire
26 Logo-Links
30 Focus: Embroidery Products
32 GNN Network
32 Marketplace
33 Contributing Writers
CorelDRAW
Help
CONTENTS
7 Using CorelDRAW:
Cleaning Up Bitmap Artwork
by Dave Demoret
10 CorelDRAW Applied:
Imposition Layout --
For Full-Color Image Transfers
by John McDaniel
12 Inside Color:
Color Correction is
Just the Beginning
by David Milisock
14 Inside Transfers:
Unisub Silver Shines!
by Bill Leek
16 Inside Screeen Printing:
Setting Up the Press
by Jeff McDaniel
19 Inside Sandblasting:
Mask Equipment
Requirements
by Judy McDaniel
21 Inside
Engraving:
Hardware
Design --
Bearings
Part 2
by John
McDaniel
23 Getting Ahead:
Auto Digitizing:
Is It Right For You?
by Deborah Sexton
28 Marketing Secrets
Staying Sharp in
Summers Slump
by Donna Gray
34 Traveling Tidbits:
Las Vegas, Lone Pine, and
Rising to a New Level
by Otis Veteto
Giving away profts with the hope that
we will make it up in volume is not the
answer for how to get more business.
-- Donna Gray
BACK NEXT FULL SCREEN CONTENTS INFO SPONSORS
July 2009 6
Click ads to go directly
to advertisers web site.
Help CorelDRAW
Help
Stahls ID offers CAD-PRINTZ
Wall Graphics
ASI launches email marketing
tool for distributors
Pulse Microsystem adds
Interactive Community to
website
Hirsch adds new color blended
font pack for Tajima units
Printa Systems offers Silver Pad
Printing Package
Floriani Embroidery Commercial
Div. offers No Show Nylon Mesh
Fusible
Digital Art Solutions introduces
Photo Tools Collection
Equipment Zone offers Printer
Support Plans for DTG Units
Imprintables Warehouse has
new premasking application tape
Unisub introduces ChromaLuxe
Clear
Great Dane Graphics offers four
new Kids Theme Stock Art
ASI introduces Distributor
Success System
J ohnson Plastics to distribute
ChromaLuxe Clear
Stahls ID releases new Zebra
Print
RS Owens receives three PPAI
Supplier Achievement Award
Nominations
Scott Fresener introduces
T-Seps Color Separation
Software
Scott Fresener launches T-Biz
Network
Imprintables Warehouse adds
new blog on heat transfers
Cotswold offers new Eco-Stick
BACK NEXT FULL SCREEN CONTENTS INFO SPONSORS
NEWS
DETAILS
(Click Here)
July 2009 7
Click ads to go directly
to advertisers web site.
Help CorelDRAW
Using CorelDRAW
Training
Cleaning Up Bitmap Artwork
By Dave Demoret, Contributing writer
Everyone knows all too well about getting Camera-Ready Art or Well-Scanned Images
from every source there is, including from Professionals who are supposed to know.
So, since we usually dont get the art we need, 72dpi direct from the internet, we need
to re-create a lot of it one way or another.
Lets take a look at one way to take an image in bitmap format and clean it up, change
it to a vector format, and use as little time as necessary for the job. Keep in mind that
this is just one way of doing this and also that you are in business to make money
and not art master pieces. If you cannot proft from your work, you wont work long.
A customer sent in this image to show the kind of artwork they got from their customers
all the time. This image really is in better shape than most and will be relatively easy
to show how this process works.
ASSESSING THE BITMAP
1. Import the bitmap image
2. Check the dpi and the sharpness of the
image edges.
3. Here the original image was 10 x 7 at
72dpi. We have a 72dpi in comparison to a
293dpi image at the right, Figure 1. To get a
higher dpi and sharper image, reduce the size
of the image by selecting and dragging one of
the corner nodes until you have the desired
dpi range.
4. If your image color is fairly solid and the
image is fairly sharp and clear of other debris,
you may choose to do one of the methods to
follow.
5. If you have an image that cannot be reduced
to increase the dpi and sharpness, you may
need to do the following steps.
a) place the artwork in your scanner. you may need to print it frst if the bitmap
was sent to you by eMail.
b) Re-Scan the artwork at a higher dpi of no less than 300 and probably no
more than 600dpi. This will usually allow you
to get a cleaner image to start with.
c) With the artwork at the higher dpi, you
again may choose one of the methods below.
Method 1: Converting the Artwork to Black
& White
The reason you are changing the image to black
& white is for edge defnition, density of color and
speed. Remember, youre in business to make
money. To do this, just follow these steps.
1. Select your new image, click on bitmaps
in the main menu.
2. Then, in the pull down menu select
Mode.
3. In the Mode fyout menu select Black
& White (1bit) as in Figure 2.
4. This will produce a pop-up menu as
in Figure 3 where you will want to select
Line Art in the Conversion Method box
also shown in Figure 3.
5. At this point you will select the new
image, go to the Property Bar and click on
Trace Bitmap and chose Line Art.
6. This will produce the best image in a
vector format as in Figure 4. The image is
clean and solid but the text in the artwork
has been all but totally washed out of the image.
Note: Notice the text has been removed in
Figure 4. This is because the color of the text
was not dark enough to reproduce as black in
the conversion method. Most of the
time you will want to select the proper
BACK NEXT FULL SCREEN CONTENTS INFO SPONSORS
July 2009 8
Click ads to go directly
to advertisers web site.
Help CorelDRAW
Using CorelDRAW
Training
font and type it in yourself anyway. We dont worry too much about the text converting since it is more desirable to use a font
so you can do editing later.
7. You may now select the proper color to put back into the new vector image and add the text. (For more on how to add
color & text, call us.)
Method 2: Solidifying the Color
The second method takes just a little more time but it is sometimes necessary due
to very poor color density. you may choose to do the frst part of this method even if
you fnish with the Black & White method. This is just to solidify the color (or increase
the density).
After assessing the bitmap, you may choose to clean up the color. That is, we will
make the bitmap colors more of one solid color as opposed to the hundreds of color
pixels seen in the original.
1. The frst step is to click on the bitmap image to select it.
2. Go to the Property Bar and click on Edit Bitmap. This should take you directly
into Corel PHOTO-PAINT.
3. With the image in PHOTO-PAINT, if you zoom in closely you will easily see
how different your colors are in each pixel as in Figure 5. We want to make them
all the same color or red or blue.
4. While you are still zoomed in close, select the Eyedropper Tool and chose a
dark blue pixel.
5. Notice the blue square at the bottom of your Tool Box on the left. This is the
Foreground Color Square. There is also a double arrow icon next to it. This is
for swapping colors of Foreground and Background Colors.
6. Click on the double arrow icon, placing the blue in the background, and then
select a lighter shade of blue to be placed in the Foreground Color Square.
Note: You may also use any color from the Color Palette to swap colors, as in Figure 7.
7. At this point you are ready to change all the pixels to one color. Simply go to
the Paint Tool Flyout menu, just under the bucket in your Tool Box, and select the
last icon... Replace Color Brush Tool.
8. You may want to increase or decrease your Nib Size from your Property Bar
for this tool. Here I have it at 60 but it will be relative to your zoom level and how
BACK NEXT FULL SCREEN CONTENTS INFO SPONSORS
July 2009 9
Click ads to go directly
to advertisers web site.
Help CorelDRAW
CORELDRAW APPLIED
By Judy and John McDaniel Learn
I mposi t i on Layout
For Ful l -Col or I mage Tr ansf er s
So far in this series weve showed how Imposition
Layout in CorelDRAW can be used to duplicate layouts
for standard labels; and then how it can be modifed to
create custom layouts.
To Review
We can use Imposition Layout with Laser Engravers,
Mechanical Engravers, Sublimation Printers, Vinyl
Cutters, Sandblast Film Printers, etc., etc. Essentially
we can use it with any output device that has a print
driver for Windows, and even some that dont.
As weve shown before, to effectively use Imposition
Layout we need to use the products size as the page
size in CorelDRAW; or if we want to introduce a gutter
between pieces, a page size that is slightly larger than
the product size. And then in the output devices printer
driver use, (1) a standard paper size, or (2) a custom
material size, or (3) the machines table size.
Following this practice will allow us to duplicate and
distribute one layout over the output material, creating
as many copies as will ft.
In some of the previous articles we have used this
feature to step and repeat a static layout. Essentially
applications where all the pieces produced are identical.
Last time we showed how Imposition Layout can be
used with variable information.
Up to this point we have concentrated on simple projects
that contain no photographic images, applications
that are designed primarily for engraving.
What we will tackle now is how we can apply
imposition layout tools in full-color image
transfer applications. First, where the image
is static and text information is variable; then
well consider an application where pictures
are a part of the variable data.
Our First Project
The frst project we will tackle is full-color name
badges to wear in the offce and at trade shows.
If you have a retail shop or sell your products
at shows, fairs, etc., wearing company badges
is excellent advertising. If at all possible its
always good to wear your work. It shows
potential customers one of the products you
can create for them.
The frst decision we need to make is badge size and
image transfer method. For our purposes (advertising
and identifcation) we will select a pre-cut 2x3 inch
badge and transfer the image via sublimation. That
will give us lots of area for a full color print with vibrant
colors.
Since we dont want to produce badges one at a time,
our frst task is to create or purchase a holding fxture,
i.e. production jig. For sublimation image transfer
purposes, our fxture needs to be able to withstand
temperatures in a heat press (approximately 400 F),
so it needs to be made from heat resistant materials.
By doing a little research on the web we found a pre-cut
badge blank and production jig fxture available from
Unisub. The product number for the badge is 5530 and
for the fxture is 5941. Basic CorelDRAW templates
are available for both items on their website, and the
products are available from a number of sublimation
material suppliers.
The basic template for the badge is shown in picture
1, and for the production jig is picture 2. Both of these
are OK but need a little more work to make them really
usable.
The Badge Template
Well start by modifying the badge template. Youll
notice its setup on an 8.5 x 11 inch page, with
Basic CorelDRAW template for a name badge.
BACK NEXT FULL SCREEN CONTENTS INFO SPONSORS
July 2009 11
Click ads to go directly
to advertisers web site.
Help CorelDRAW
CORElDRAW APPlIED
a text description of the two colored rectangles, a blue rectangle on top of a green one.
lets frst defne what those areas are. The blue rectangle represents the products
size; the green one is a suggested overprint area, otherwise known as bleed.
The purpose of the bleed is
to insure the entire surface
of the badge is printed.
If you dont overprint the
transfer a little, you run
the risk of having a white
edge showing on the
fnished product. That said,
everything that must appear
on the product must ft within
the blue area.
The template is not usable
in its present state, except
as a guide. Any background image can be placed within the green rectangle using
the PowerClip command, and the blue rectangle can be used as a reference for what
will appear on the product.
However, we do not want to print the text, and probably want to print more than one
image on a sheet of transfer paper; or at the very least have the option of using a
smaller sheet.
To make the template more usable I would suggest the following changes:
1. Delete the text -- left click on the text and press the delete key on the keyboard.
2. Resize the page to the size of the green rectangle -- 3.25 x 2.25 inches in
landscape mode, change the page size on the property bar with nothing in the
layout selected.
3. Make sure the rectangles are centered on the new page -- If they are not, select
both rectangles and then press the P key on the keyboard.
4. Give the blue rectangle a blue outline (or any other color you would like) and
remove its fll -- left-click on the blue rectangle, then left-click in the X well on the
color palette to remove the fll, and right-click blue on the color palette to create
a blue outline.
5. Give the green rectangle a green outline and remove its fll -- left-click on the
green rectangle, then left-click in the X well on the color palette to remove the fll,
and right-click green (or any other color you would like) on the color palette to
create an outline.
Production jig available from Unisub.
6. Make sure the Object Manager Docker is visible -- If its not, click on Tools/
Object Manager, or Windows/Dockers/Object Manager
7. In the Object Manager, create a new layer (for convention I have named the
layer Product Outline).
8. Optionally rename the original layer Print Area.
9. Drag the Blue Outline and drop it on the Product Outline layer.
10. Turn the Product Outline layer off for printing and editing. Left-click the printer
and pencil icons next to the layer name in the Object Manager Docker.
11. Create another new layer (Ive named this the Background layer). Drag this
layer below the Print Area layer. We will use this layer to import any background
picture we want to use for the product.
12. Create one fnal new layer to contain any text and additional graphics we want
to print on the product.
13. Make sure the layers
are ordered top down --
Text & Graphics, Product
Outline, Print Area, and
Background; and make
sure Product Outline is
off for printing and editing.
14. Save the layout as a
CorelDRAW Template,
click on File/Save As
Template.
See picture 3 for the
completed template.
Conclusion
What we have accomplished so far is to take a manufacturers product template
and modify it for our use. The original template had a single item on the page and
was not suitable for use with Imposition Layout or Print Merge. We have changed
all of that. Next time we will start with the revised template and populate it with a
background and text for use with Print Merge.
Judy and John McDaniel are owners of JHM Marketing and CorelDRAWhelp,
Inc. They provide consulting and training services for the industry. Currently they
are both Corel Training Partners. They offer private training; as well as one-on-one
application support through an email subscription service. (For information on training
services offered and their application support service visit www.CorelDRAWhelp.
com. (For information on the Association of CorelDRAW Professionals, please
visit www.CorelDRAWPro.com.) They can be reached via email at JHMcDaniel@
CorelDRAWhelp.com.
Completed template.
CDH
BACK NEXT FULL SCREEN CONTENTS INFO SPONSORS
July 2009 12
Click ads to go directly
to advertisers web site.
Help CorelDRAW
INSIDE COLOR
By David Milisock Learn
Col or Cor r ec t i on i s
Just t he Begi nni ng
What Ive done here, with the gracious consent of my friend and colleague Nancy
Seibert of Advanced Signs and Graphics, is to set up a situation where we can discuss
not only color correction but simple image manipulation. Captures A and B are the
end result of an image capture of Nancy and some author who thinks he knows some
stuff about color, converted from RAW to Prophoto RGB, with all the details as shown
in capture C and then converted to U.S. coated V2 CMYK.
The most interesting and diffcult concept of color is that in many instances there
is no right or wrong. I left the images on A and B in the fle as high resolution so you
can zoom in on them and examine them more closely. If we place 20 people into a
room and view these two images we may get as many as 20 different opinions. In my
experience youll get 3 to 5 different opinions for sure!
The arguments will go like this: Well, A or B (depending on the opinion) has more
natural fesh tones, and B or A has more accurate whites.
All of these discussions are wonderful and are the things that build character in
the group. Needless to say, in the end on a calibrated system, it is this character that
will be making the decisions on how the image should be corrected.
I have a very long term relationship with my monitor, a Mitsubishi Diamond Pro
91TXM and know that it and no other monitor display exactly like the print. The display
system is regularly calibrated and work is always checked against the print. In the case
of these two images both display well; image A displays just close to being too fat and
too blue/green, and image B displays just being on the edge of being too warm, but
the contrast value is smoother in the shadow tones. (Not to mention the corrections
for camera faults that we will discuss later.) With that said on the Heidelberg press
that we regularly use when we run to the calibrated densitometer numbers, the slight
color shift will be toward the blue/green. Also I converted these using the Adobe U.S.
Coated V2 CMYK as it is readily available for all to use for proper previewing of this
article. Normally I would have used a Kodak CMyK profle that shipped with an older
version of CorelDRAW which I believe is a superior CMyK profle.
So the argument goes back and forth about the color, and the fact is that while we
may have our opinion, there is a spread in the shifts in the color that are acceptable
because in the end it comes down to our opinion. Among the general opinion of the
population of our client base, repeatable, acceptable or exceptional results in color are
some of what brings them back. So what are some of the other parts that bring the
clients back? In my opinion, achieving the goal of the shot! In this case, we wanted
snap shots that could be used to help promote our companies via print, web and self
promotion. The key word was SNAP SHOTS, to look natural. Not model
shots or product shots. So what we simply do is to try and remove any errors
InSIDE COlOR
CDH
induced by the capture
process while retaining the
natural look of the subject.
Notice in image A that there
is a very slight amount of red
eye, on her right cheek and
nose there was a touch of
sheen. Around the mouth
there was some shine that
was also removed. All these
things have been removed
in image B.
Image A has, in my opinion,
issues due to this sheen. Your eye does not properly focus on the center of the face
of the subject. I prefer the focus of an image of a person to be on the subjects eyes
and toward the center, left and right, of the image if at all possible.
The only editing done of this image was to convert from RAW to Prophoto, color
correction using only the tone curves, via LAB, Adobe RGB and U.S. coated V2 color
spaces, and this included the contrast adjustment. There was also a very slight amount
of cloning to remove the refection from the light source. NO SMOOTH SKIN, or any
other effects. Only the tone curves and the aforementioned cloning.
Image B, when almost fnished, displayed one issue that irked me and that was
the shine in Nancys left eye, right as we look at the image. This shine caused the
viewers focus to shift right instead of to the center. You will have to zoom into the eyes
on both images to get the full effect of how subtle this adjustment is. I used the clone
tool and removed just a very slight amount of that shine in her left eye. This brings
the viewers focus back toward the center of the face and creates a more pleasant
experience when viewing this image.
David Milisock, president of Custom Graphic Technologies Inc. of Lancaster, PA,
has been in the print production business since 1975. He specializes in professional
support for CorelDRAW Graphics Suite. He started supporting CorelDRAW fles for
print output with V4. Output includes computer to plate processes for all commercial
digital front-end applications, as well as Postscript-compliant graphic applications.
He offers technical and color management support for all RIP-driven corporate digital
output systems, and also offers Giclee printing. He can be reached at 717-509-3523
or davidmilisock@comcast.net.
What Readers Say about CorelDRAWHelp Magazine
Digital Format
Well thought out. Well designed. Easy to follow links. Better than a snail-mail
magazine because the provided links give immediate access to addtional
information and resources! Leo Lennemann, Sandra Lees Trophy & Gift,
Grove, OK
I think it is easy to get around in page by page in pdf format. J ohn J Runyon,
South Metro Wire EDM Inc., Shakopee MN
I look forward to each issue. I actually print it and keep it in a binder for future
reference. ... You continue to help my awards business grow due to the
educational and how-to articles. Rob Thomas, Celebrations, Farmington, MO
Excellent Content
This magazine is a great resource. I have gained a great deal of insight into the
program, and Ive also found sources of supply. Nelson Wood, Woods Wood
Works, Caledonia MI
I love reading CorelDRAWHelp! Its quite informative and really gets my
creative juices fowing. Debbie Santiago, New J acobs Chapel, Clermont, FL
Keeps me up to date. Look forward to it. Save every issue and print articles of
interest to put into my training book for employees. Chris Williams, Created
For You, Horsehoe Bay, TX
Helps keep me informed about new products and new ways to use CorelDRAW.
Lawrence Coen, Coen Enterprises & Graphics, Elkhart,KS
Your articles help keep me up to date on many new technological methods
which are a tremendous help in my style of business. Gary Whitener, Cody
Tees, Ste. Genevieve, MO
I like all of it! It is [full of] very informative, clear, concise articles. Trish Stuart,
Twisted Threads, Emory, TX
Great info in every issue. Dennis Duval, Duvals Custom Etched Glass, J asper,
TX
CorelDRAWHelp is like a refresher course; it lets me in on better ways to do
graphic techniques. A time saver. Dianne Beck, Poulsbo Church, Poulsbo, WA
I appreciate the fact that CorelDRAWHelp is focused on helping the business
owner become successful. I havent read an issue that hasnt given me
something to assist my business. J im Good, A2Z Engraving, Madison, AL
BACK NEXT FULL SCREEN CONTENTS INFO SPONSORS
July 2009 14
Click ads to go directly
to advertisers web site.
Help CorelDRAW
INSIDE TRANSFERS
By Bill Leek Apply
Universal Woods/Unisubof Louisville, KY, has just
released a new series of products built around a great
new silver aluminum substrate with a clear scratch and
UV-resistant sublimation coating that will appeal to both
the photographic and personalized products markets.
The photographic reproduction products are marketed
as CHROMALUXE CLEAR. They provide an exciting
addition to the already highly successful ChromLuxe
white-coated photo product line. The ChromaLuxe
high-defnition photo panels are unlike anything else
available. The special clear coating on silver aluminum
provides photographers with a unique and modern look
to images that cannot be replicated using any other
technique. Photographers have sought a method for
printing their images on silver for some time. Some
silver-coated inkjet papers have been released, but they
have not come close to the look and durability of this
new Unisub product. Black-and-white photographers
will particularly like the highly refective gloss aluminum
fnish. landscapes, product
shots, and portraits come to
life with a stunning, elegant
appearance. ChromaLuxe
Clear opens up a whole new
printing dimension for them.
ChromaLuxe panels are
.045 thick and have .25
rounded corners. They are
available in 8x10, 11x14,
11.5x11.5, and 16x20 sizes.
I would like to see a 12x16
panel that could be printed
on a 13x19 format printer
and transferred on a 16x20
heat press. As with all
Unisub products, pressing
time is only a minute and
obtaining good results is
virtually foolproof.
The panels can be displayed in many different ways.
Unisub offers an inexpensive offset mounting system.
Vintage black-and-white photos can be mounted in a
variety of nostalgic wood frames. I particularly like using
low profle shadowbox modular metallic frames that
complement the image. These are available in many
fnishes and are relatively inexpensive.
HOW TO GET THE BEST RESULTS
ChromaLuxe Clear will work
best with higher contrast,
slightly darker images. Proper
image selection and adjustment
is key for optimum results.
Soft, pastel prints on silver will
appear washed out and kind
of gimmicky. When working
with color, images with more
intense colors and somewhat
harsher light will provide the
most stunning results. Cars,
motorcycles and anything that
has chrome on it are perfect
subjects. Dramatic landscapes
(Ansel Adams) sunsets and
seascapes also look great on this material.
If your source photo does not meet these requirements,
you can add contrast using the TONE CURVE adjustment
in Corel PHOTO-PAINTand apply an S
CURVE. (An illustration of this is included).
UNI SUB SI LVER SHI NES!
Unisubs Brand New Sublimation Substrate Produces Dramatic Results
S CURVE: Using
PhotoPaint apply
an S Curve as
illustrated to
increase contrast
of your image
prior to transfer.
InSIDE tRAnSFERS
WAIT.THERES MORE!
In addition, Universal Woods has released license plates,
name badges, id tags and clock kits made from the same
silver aluminum. These are marketed as UNISUB SILVER.
The combination of great looks, durability and the extra
thickness of the .045 aluminum make this product line world
class. The photos in this article speak for themselves.
CONCLUSIONS:
Universal Woods again shines and stands out as a true
innovator and market leader in the sublimation marketplace.
ChromaLuxe Clear and Unisub Silver are exceptional
imprintable substrates. Order some samples today. You wont
be disappointed.
Bill Leek is a industry writer based in Houston,TX. He has over 30 years experience in computer engineering and
graphics design. He has developed several lines of color imprintable products, and has done testing on a variety
of products for different manufacturers. He can be reached at wfeek@jblgraphics.com or 281-970-6677.
CHROME SILVER SATIN: The beauty
of ChromaLux Clear is demonstrated
in this high contrast image with
vibrant colors.
LICENSE PLATE: License Plates produced
with Unisub Silver have a dramatic look and
are extremely durable.
SMALL SILVER ITEMS: Unisub Silver provides
a perfect substrate for these high quality name
badges and id tags.
CDH
BACK NEXT FULL SCREEN CONTENTS INFO SPONSORS
July 2009 16
Click ads to go directly
to advertisers web site.
Help CorelDRAW
INSIDE SANDBLASTING
By John and Judy McDaniel Applications
Mask Equi pment Requi r ement s
InSIDE SAnDblAStInG
CDH
use on materials that can be damaged by water like wood. The disadvantages of
vinyl-masking are: (1) it is not suitable for highly detailed images, and (2) vinyl requires
additional steps in application.
Adding a vinyl cutter to your equipment inventory will have the advantage of giving
you the ability of creating vinyl signs.
Laser Masking
A laser engraver is another device that can be used for creating sandblast masks.
Several companies are producing flms that can be applied to glass and then cut with
a laser engraver. This form of masking can produce excellent detail. To purchase a
laser for this purpose would cost in the area of $10,000 to $15,000 dollars.
Adding a laser engraver will also add all types of laser-engraved items to your available
product offerings and expand your capabilities.
Conclusion
Setting up a sandblast operation is easy and relatively inexpensive. Complete photo
mask startup packages that include some photo mask materials, an exposure unit, a
pressure pot cabinet, and a dust collector start in the $1500 range. To this package
you would only need to add an air compressor and computer, assuming you didnt
already have one.
You could also choose to create masks with a vinyl cutter or laser engraver. Then
you wouldnt necessarily need the photo-masking component of the package. You
could cut masks with the vinyl cutter, or burn them with the laser.
In short, sandblasting is one of the least expensive and most rewarding personalization
processes you can add to your business.
Next time we will describe some of the products that you can create with sandblasting
along with the type of masking that was used for each item.
Judy McDani el and her husband John are owners of JHM Market i ng and
CorelDRAW
help, Inc. They provide consulting and training services for the industry.
Currently they are both Corel Training Partners. They offer private training at selected
locations throughout the U.S., and on location for corporate customers. They have a
series of interactive CDs teaching CorelDRAW
BOOKSTORE
BACK NEXT FULL SCREEN CONTENTS INFO SPONSORS
July 2009 21
Click ads to go directly
to advertisers web site.
Help CorelDRAW
INSIDE ENGRAVING
By John McDaniel Apply
InSIDE EnGRAvInG
Axial Movement
Another motion the spindles cutting tool is subject to
is plunging into the material. This motion creates an
upward push on the cutter. If the cutter is loose in the
shaft, it will simply move up and not cut into the material.
In addition, if the cutter were a spiral futed end mill,
once it began cutting, it would tend to pull itself down
into the material. In either case, the depth of cut would
not be consistent.
Standard radial bearings are not designed to resist axial
movement. No matter how precise the bearing, all radial
bearings will allow some axial movement.
There is a special class of bearings, known as thrust
bearings (picture 3), which do resist axial movement.
Thrust bearings can be as simple as brass-washers,
wave-washers; or as sophisticated as angular contact
ball bearings. All are designed to resist axial movement.
Many spindles are produced without any form of
thrust bearings. They rely on the resistance of the
radial bearings for thrust movements. This design is
acceptable for very light duty engraving.
Some spindle designs incorporate brass washers
or wave washers to resist thrust movement. These
designs, although an improvement, are not much better;
they should only be considered for light to medium work.
The most rugged designs will incorporate angular
contact ball bearings. Angular contact means that the
bearing race is offset on an angle.
An angular contact ball bearing will resist axial
movement in one direction. They are designed to be
used in pairs, one to resist movement in one direction,
the other to resist movement in the opposite direction.
The bearing pairs are preloaded, that is locked together
on the spindle shaft, thereby resisting axial movement
in either direction.
Conclusion
The most critical bearing in a spindles design is the
radial bearing(s). In any engraving application, a poor
quality radial bearing will produce run-out, which in turn
can affect engraving quality.
As far as thrust bearings are concerned, if your primary
application is diamond drag, and you are using a spring-
loaded tool; or if youre using a nosecone that rides
on the materials surface, then you shouldnt be too
concerned about minor axial movement.
On the other hand, quality thrust bearings are vital if
your work requires precisely controlling cutting depths.
As with any design feature, it is important to decide the
type of work your machine will be required to perform.
Spindle designs that incorporate high quality, heavy-
duty bearings will generally cost more. In fact, precision
spindles can cost more than some entire engraving
machines. However, if performance, quality, and
versatility are requirements, theyre worth every penny.
Next time well conclude our look at spindles, and focus
on tool holding methods.
Judy and John McDaniel are owners of JHM Marketing
and CorelDRAW
GETTING AHEAD
By Deborah Sexton Grow
Auto Digitizing: Is it Right for You?
GEttInG AHEAD
GEttInG AHEAD
may be less of an issue for smaller shops, Diamond says. If youre doing one
piece, you may not care about sewing ineffciencies.
Youll also get higher-quality results by starting with higher-quality artwork,
Maranthe says. If you use a scanned-in blurry image, you will not get a good
result compared with a clean vector
image, she says. Rubbish in, rubbish
out, so to speak.
Finally, stick with simple, solid color,
shapes, text and logos, Maranthe says.
Depending on the sophistication of the
software, you can get great results with
more complex designs also.
By understanding these limitations
and strengths, youll be able to make a
better-informed decision about how auto
digitizing software may be able to help
your shop.
Deborah Sexton, former editor of Impressions Magazine, has been in the
apparel graphics industry since 1981. She currently does marketing and public
relations for apparel graphics companies. She can be reached at dsexton@
sbcglobal.net.
The pur pose of an aut o
di gi t i zi ng pr ogr am i s t o
scan i n artwork and have
the program automati cal l y
conver t i t t o st i t ches. It
cannot replace the sewing
qual i t y and ef f i ci ency of
manual digitizing, but may
be useful for simple shapes
and lettering. Photo courtesy
of Pul se Mi cr osyst ems,
Mississauga, Ontario.
What an auto digitizing program
shoul d not be expect ed t o
do is replace an experienced
digitizer. Sophisticated designs
such as t hi s one can onl y
be cr eat ed by usi ng a f ul l -
f eat ur ed manual di gi t i zi ng
program. Photo courtesy of RNK
Distributing, Knoxville, Tenn.
CDH
Share CorelDRAW Tips
In recent surveys, readers of this magazine have said theyd like to have
more tips on CorelDRAW, and theyd like to know how other people
are using the program for different projects. So we invite you to submit
examples of artwork youve created, along with a description of how you
did it, and your bio with a photo. We are looking for everything from
brochures and flyers to sign and t-shirt artwork.
To share your tips, just send an email to the editor at editor@coreldrawhelp.
com . Thanks much!
BACK NEXT FULL SCREEN CONTENTS INFO SPONSORS
July 2009 26
Click ads to go directly
to advertisers web site.
Help CorelDRAW
SPONSORS: MAGAZINE
Click these Logo-Links to go directly to sponsor websites
These are the proud sponsors of CorelDRAWHelp magazine. Be sure to thank
these companies for bringing you this magazine free of charge.
SPONSORS IN THE NEWS
This month, our sponsors have been making these headlines:
SPONSORS: TOUR
Click these Logo-Links to go directly to sponsor websites
Visit the CorelDRAW Digital Help Tour!
Great Dane
Graphics has four
new Kids Theme
Stock Art
Imprintables Warehouse has
new blog on heat transfers
Johnson Plastics offers
ChromaLuxe Clear
Stahls ID releases new
CAD-PRTINZ Zebra Fill
BACK NEXT FULL SCREEN CONTENTS INFO SPONSORS
July 2009 27
Click ads to go directly
to advertisers web site.
Help CorelDRAW
Professionals is The Education & Business Resource for CorelDRAW Users Worldwide.
Its goal is to help: 1) IMPROVE your CorelDRAW skills, and 2) MAKE MONEY with those skills! You can participate in ACDRP services in four ways:
THE WORLDS ONLY ASSOCIATION FOR CORELDRAW
USERS
INVITES YOU TO MAKE MORE MONEY WITH CORELDRAW!
CorelDRAWHelp E-News is a free digital newsletter delivered
to you twice a month focused on Industry news via the Graphics
news Wire, links to valuable resources, and a complete educa-
tion and show Calendar. S
CorelDRAWHelp, the Entrepreneurial magazine for CorelDRAW
users, features in-depth content on:
How to Use CorelDRAW -- tips, tricks, advanced
ar t wor k, success st or i es, i nt er vi ews, and mor e.
How to Apply CorelDRAW -- for graphic production
processes such as embroidery, engraving, heat printing, laser,
promo products, printing, sandblasting, signmaking, sublimation,
and screenprinting.
How to Proft from CorelDRAW -- Product news, business
columns, reviews, profles, and advertising with live links.
SUBSCRIBE -- NO CHARGE JOIN -- $60 PER YEAR
All users of CorelDRAW Graphics Suite are qualifed to
subscribe free to CorelDRAWHelpmagazine (PDF format) and
CorelDRAWHelp E-News.
Subscription to CorelDRAWHelp &
CorelDRAWHelp E-News
TTF Newsletter. Subscription to the
monthly Tips, Templates &Fixtures
newsletter only available to members.
GSG Basic Listing. You can list your
services in the Graphic Services Guide
in one category as part of membership (a
$25 value).
Access to QuickLearn. A keyword
searchable database of 100s of articles
on CorelDRAW, graphics production, and
business.
All users of CorelDRAW are invited to join the Association and
take advantage of exclusive content, discounts, and profes-
sional recognition. ACDRP membership includes:
TTF
QuickLearn
QuickTNT
Archives
BASIC GSG LISTING -- $25 PER YR
the Graphic Services Guide is the Industry Yellow Pages for
Services and Finished Goods. GSG is promoted in all our publi-
cations and our website to the world of CorelDRAW users. Your
listing gives you the opportunity to promote your services (in any
of 40 categories) to other CorelDRAW users.
the basic listing includes:
your company description
email link, and
listing in one category.
Additional service categories are $10 each per year.
the Enhanced GSGlisting is for companies that want to list in
two categories and add a photo or logo.
ENHANCED GSG LISTING -- $50/$75 PER YR
Classifeds
Access to QuickTnT. A growing database
of CorelDRAW tips for understanding the
fne points of the program, and templates
that can be downloaded to speed up your
production.
Access to Archives. Past issues of
CorelDRAWHelpare available to members
with live links.
Bookstore Discounts. Members receive
a 10% discount on all products in the Corel-
DRAWHelpbookstore.
Professional Recognition. Use of the
ACDRP logo for professional identifcation
on business cards, websites, and letterhead.
You also receive a membership certifcate.
Classified Ads. Members can place
one classifed ad per year at no charge with
photo, and run it till the item is sold! (a $35
value)
HOW TO PARTICIPATE
To Subscribe (no charge)
To J oin ($60/yr)
To List in the Graphic Services Guide
($25 Basic $50/$75 Enhanced,
or $120/145 for Multi-Service)
CorelDRAWis a registered trademark of Corel Corp., and is used with permission.
Visit www.coreldrawhelp.com
and click on the appropriate links.
800-276-8428
the Multi-Service GSGlisting allows you to list up to 40 differ-
ent service categories with detailed descriptions and add a photo
or logo.
MULTI-SERVICE GSG LISTING -- $120/$145 PER YR
BACK NEXT FULL SCREEN CONTENTS INFO SPONSORS
July 2009 28
Click ads to go directly
to advertisers web site.
Help CorelDRAW
MARKETING SECRETS
By Donna M. Gray, CRM Grow
MARkEtInG SECREtS
Get back to basics
Because the selling / buying environment is not the
same as it was a couple years ago, its time to get back
to basics. Staying sharp in summers slump includes
basics like:
Choose where we spend time prospecting.
It doesnt make a lot of sense to waste time
chasing business that we really dont want
just to make a sale. Its better to concentrate
on romancing existing clients or to dig deeper
into those accounts. Remember 80% of good
business comes from 20% of our customers.
Find ways to get our offerings to the top of the
customers priority list. Since many clients are
waiting and seeing, fnd ways to show them the
beneft of placing their order and getting it off
their to-do list.
Plan and practice for the objections. Avoid
being negative.
Look for and present exciting new product ideas
for the coming season.
Draft some good questions to ask customers.
Good questions and good listening skills often
get the sale were looking for.
Communicate with prospects. Create proposals.
Follow up with details.
Find ways to make it easy for customers to
buy. If you dont already take credit cards, get
a program in place.
Ask for referrals.
Dont get discouraged. This too shall pass.
Time for R&D
Summers slump will fade away, however, while were in
the middle of a slow time why not invest in research and
development? This is a great time to go through all last
years industry information with an eye to fnding new
vendors, new product ideas, and reading about all the
changes that took place in the industry when we were
too busy to look. This is a good time to do research on
how good your support team of accountants, attorneys,
bankers, attorneys and insurance companies are doing
for your company.
Are they on top of your needs? Are they looking for ways
to help your company succeed? Are they introducing
your business to their contacts? Have you asked
them to introduce your company to their connections?
Typically, J uly and August are our companys time
to make sure were getting our moneys worth from
our support team. Thats when we get our insurance
(both business operating and health) renewal rates.
That means we really look at what were getting and,
if necessary, negotiate for something betteror make
necessary changes. Theres never really time to give
this a good R&D look during busy season.
Fill the pipeline
Summers slump is also a good time to develop some
sharp marketing ideas for fall and winter. During the slow
times, we want to keep our marketing functions going
strong so we can keep the pipeline flled for the coming
months. Its also a good time to connect with other area
business people to keep tabs on how the local market
is surviving, thriving, or making it through. Connecting
with fellow business people is a good way to increase
the companys visibility within the business community.
Working to be sharp through summers slump will get
results. Use this time to connect with industry peers.
While were all competitorswere all professionals
and professionals help each other succeed. Staying
sharp requires us to have a focus on exactly what we
expect for a bottom line at the end of summer. Its time
to get savvy. Use this time to develop world class sales
skills. Create a new marketing plan that will get your
companys foot in the doors that have been closed.
Refuse to participate in tough times. Get tough and
get going. Summers slump doesnt bother those who
stay sharp.
Donna Gray is the president of Total Awards, Promotions,
& Gift (aka AwardsMall.com) in Madison, Wis. She and
her husband Dave have run their full service awards and
personalization business since1977. She has presented
seminars nationwide, won awards as Business Woman
of the Year, Retail Marketer of the Year, and Sam Walton
Business Leadership Award. She is also the author
of two books on family business, Its Al l Rel ati ve!
Surviving & Thriving in A Family Business (2007),
and Never Quit: The Ups & Downs of Running a
Family Business (2004). She has earned professional
credentials as a Certifed Recognition Master. She can
be reached by email at donna.gray@AwardsMall.com.
CDH
PUT YOUR ART ON THE COVER
You are invited to submit your artwork for the
cover of future issues of CorelDRAWHelp! Each
issue will highlight the artwork of one selected
CorelDRAW user. (www.coreldrawpro.com/
coverart.htm)
There will also be a short About the Cover article
on the inside that identifies you as the artist,
and describes briefly how you created it. Your
contact information will be listed so others in the
CorelDRAW community can contact you for more
details or just to congratulate you!
BACK NEXT FULL SCREEN CONTENTS INFO SPONSORS
July 2009 30
Click ads to go directly
to advertisers web site.
Help CorelDRAW
PRODUCT FOCUS
Opportunity
To request information from any of the suppliers in the Product Focus, simply
click here on INFO REQUEST. It will open an electronic request card, which you can
minimize at the bottom of the page and then check when you want more info.
Embr oi der y Pr oduc t s
IMPRINTABLES WAREHOUSE HAS POLY-TWILL
BACKING FOR EMBLEMS AND MORE
Poly-Twill is a 100% polyester twill material with a
thermal-adhesive backing from Imprintables Warehouse
of Masontown, PA, that can be used to make emblems,
patches, appliqus, letters, and numbers. It works on 100%
cotton, 100% polyester, poly/cotton blends, feece, nylon,
and polyester knits.
Poly-Twill comes in 20 of the most popular athletic
and fashion colors including metallic gold and silver.
Imprintables Warehouse also sells 100% polyester
embroidery thread for sewing the emblems down.
Poly-Twill is a great way to keep stitch counts low by
using the twill as a background for designs instead
of stitches.
Imprintables Warehouse is a full-service
distributor of equipment and supplies to create a wide range of heat-applied graphics
including digital inkjet and laser transfers, digital cutters, digital cutting software, heat-
applied materials, and heat presses. For more information, contact the company at
800-347-0068 fax: 724-583-0426; e-mail: info@imprintableswarehouse.com; or visit
www.imprintables.com.
COTSWOLD OFFERS FUSIBLE DIAGONAL MESH
Diagonal No Show Nylon Mesh, offered by Cotswold Industries of New York, NY,
which is specifcally designed to be used with light-colored fabrics where traditional
stabilizer shows through the front of the shirt, is now available in a fusible version. By
fusing the stabilizer to the garment, it prevents the fabric from shifting or stretching in
the hoop, which can affect registration.
Another advantage of the fusible version of this versatile stabilizer is that you can
avoid using messy adhesive sprays for the same purpose. Overspray often lands on
fabric, the machine, and needles, leaving gummy residue that attracts dust and lint
and can affect the performance of the embroidery machine.
Fusible Diagonal Mesh is made with a specially formulated low-melt adhesive. It
bonds at only 260 degrees F, which ensures
it will not scorch or shrink the fabric. When
an embroidery is fnished, the edges can be
re-fused and the excess can be trimmed.
In addition to being an ideal support
for left chest logos on polo shirts made of
piqu knit, jersey, or micro mesh, its also
great for T-shirts, infant items, and all types
of micro-fber performance wear. Its super
softness makes it ideal as a covering to use
over stitching that may feel scratchy next to
the skin. It also drapes very well and is almost invisible from the front.
One layer of Diagonal Fusible Mesh supports between 10,000 and 12,000 stitches
in a moderately dense design. If you need support for a higher stitch count, an additional
layer of tearaway works well. Diagonal Fusible Mesh comes in 15-inch width by 25
yards and 100 yards; 20-inch width by 25 yards, 50 yards and 100 yards, and 30-inch
width by 50 yards. All stabilizers can be custom cut upon request.
MARATHON AMERICA OFFERS THERMAL STICK
Turn your embroidery designs into appliqus or patches with Thermal
Stick, a brand-new, unique, pressure-sensitive, fusible stabilizer offered
by Marathon America of Carrollton, TX. Thermal Sticks specially
formulated adhesive keeps the stabilizer frmly in place while
embroidering, but at the same time makes it easy to
reposition multiple pieces as necessary. It also wont gum
up your needles causing thread breaks, needle breaks,
or damage to garments. It is machine washable and
dry-cleanable.
With Thermal Stick you can make emblems that
can be applied to jackets, jeans, tote bags, sweat shirts,
and more. Once heat is applied, Thermal Stick creates a
permanent bond with almost any fabric.
Thermal Stick comes in a range of the most popular quantities and sizes. A
40-inch roll comes in 25 yards, 50 yards, and 100 yards. A 20-inch roll comes in 25
yards, 50 yards, and 100 yards. Precut squares in an 8-inch by 8-inch size
are available in packages of 250 sheets.
BACK NEXT FULL SCREEN CONTENTS INFO SPONSORS
July 2009 31
Click ads to go directly
to advertisers web site.
Help CorelDRAW
PRODUCT FOCUS
Opportunity
HIRSCH OFFERS THE VERSATILE THIRD HAND
AIR CAP FRAMING SYSTEM
With The Third Hand from Hirsch International of
Hauppauge, NY, you can hoop caps quickly, easily, and
perfectly every time. The Third Hand is an air-driven
hat and cap framing system designed by contract
embroidery shop Campus Chalet. The device
can be used anywhere. It can be attached to an
embroidery machine or to a table to create an
instant, convenient, cap-hooping station.
It eliminates back strain and reduces stress
on the hands due to the normal stretching and
pulling needed with traditional cap hooping systems.
Another beneft of The Third Hand is that it hoops
caps tighter and more accurately, which eliminates loss
of registration and results in higher quality embroidery overall.
Help eliminate workers compensation costs and improve your
cap embroidery with The Third Hand.
Hirsch International offers a full line of embroidery, screen
printing and textile laser equipment, accessories, and supplies.
It has 25 locations throughout the United States, more than 50 technicians in the field,
and 80 plus customer service operators providing phone support.
AMERICAN EMBROIDERY SUPPLY OFFERS
SUPER BRITE POLYESTER THREAD
For a durable thread with a super bright shine, Super Brite Polyesterfrom
American Embroidery Supply in Columbus, GA, has a high tensile strength with a
sheen similar to rayon. The thread is 120 denier two-ply 40 weight thread that is
designed to work with an 11.75 needle.
Its bleach resistant so it can be used for uniforms that will go through industrial
laundering as well as hold up to everyday wear and tear. Thread colors can be matched
to 450 Pantonelicensed colors so you can accommodate logo colors for any client.
It comes in two sizes: a king-size spool that contains 5,500 yards and a mini-king
spool that holds 1,000 meters of thread.
All online orders are shipped the same or next business day. Detailed instructions
on how to use many of the specialty stabilizers are available on the Web site.
BROOKS INDUSTRIES OFFERS DIAGONAL NO-SHOW NYLON MESH
Diagonal No Show Nylon Mesh offered by Brooks Industries of Vernon, CA, is
specifcally designed to be used with light-colored fabrics where traditional stabilizer
shows through the front of the
shirt. It is ideal for left chest
logos on polo shirts made of
piqu knit, jersey, or micro
mesh. Other uses include
T-shirts, infant items,
and all types of micro-
fiber performance
wear. Its super softness makes it ideal as a covering to use over stitching that
may feel scratchy next to the skin. It also drapes very well and is almost invisible
from the front.
What is unique about Diagonal No Show Nylon Mesh is its construction. Its made
of nylon mesh with a diagonal embossed pattern, which makes it more directionally
stable. This allows it to hold more stitches per single layer than traditional perpendicular
patterned mesh. The result is tighter registration and more defnition per layer. It
also can easily support higher stitch counts by adding a mid-weight tearaway as a
sandwich layer.
DALCO ATHLETIC HAS LETTER PLACEMENT ADHESIVE SPRAYS
Adhesive sprays can make the job of appliqu placement easier and faster. They
help keep fabric in place while its being tacked down and fnished. Dalco Athletic of
Dallas, TX, offers two adhesive sprays for embroiderers.
The AADH Letter Placement Adhesive Spray is designed for temporary appliqu
placement. Its ideal for sewing, quilting, embroidery, appliqu, and craft projects. To
use, simply apply a light coat on the back side of the fabric. It can be repositioned
and it contains no ozone-depleting chemicals.
The MSA 1000 Madeira Letter Placement Adhesive Spray is clear, repositionable,
and non-staining. It has a pleasant fresh lemon scent and a quick tack. It is ideal for
any type of appliqu work, and the spray does not build up on needles or machine
parts. It also does not contain any CFCs or corrosive chemicals that could harm your
equipment.
Dalco Athletic offers a full line of officials uniforms and accessories as well as
die-cut, water-jet cut, and kiss-cut letters, numbers, shapes, and mascots in a range of
materials for creating team and spirit wear. They also offer roll materials to cut your own.
To request information from any of the suppliers in the Product Focus, simply
click here on INFO REQUEST. It will open an electronic request card, which you
can minimize at the bottom of the page and then check when you want more info.
BACK NEXT FULL SCREEN CONTENTS INFO SPONSORS
July 2009 32
Click ads to go directly
to advertisers web site.
Help CorelDRAW
E-News
Your ad here could reach
thousands of potential customers.
Find out how by calling our Ad
Representative J ohn McDaniel II.
541-990-6687
the entrepreneurial magazine
Help CorelDRAW
CONTRIBUTING
WRITERS
Louie Alvarez started in the industry working for one of the largest trophy shops
in Central California, and then opened one of the frst retail laser engraving
businesses. He has given seminars and workshops on CorelDRAW and
Laser for many years, and has written for several publications. He is now with
Vytek Industrial Lasers and is based in Las Vegas, NV. He can be reached at
alvarezwriting@gmail.com.
Dave Demoret founded Prolink Graphic Services to help people understand
and proft from learning CorelDRAW. He has been in both the Flat Graphics
Industry and the Decorating Graphics Industry for 30 years. He has written
articles for several publications, is a Corel Training Partner, and conducts
workshops nationwide and online. He is the author of several CD Instructional
programs on CorelDRAW. He can be reached at 765-DO COLOR (362-6567) or
daved@prolinkgs.com
Donna Gray is the president of Total Awards, Promotions, & Gift (aka AwardsMall.
com) in Madison, Wis. She and her husband Dave have run their full service
awards and personalization business since 1977. She has presented seminars
on a variety of topics nationwide, and has won many marketing awards. She
is the author of two books on family business, and can be reached at donna.
gray@AwardsMall.com.
Bill Leek is a color consultant for JBL Graphics in Houston, TX, and has over 30
years experience in computer engineering and graphics design. He has developed
several lines of color imprintable products, and does testing on a variety of
products for different manufacturers. He can be reached at wfeek@jblgraphics.
com or 281-970-6677.
Jeff McDaniel is the owner of Creative Graphic in Philomath, Oregon. He
worked as a journeyman machinist before getting into the graphic products
business. Creative Graphic offers laser engraving, rotary engraving,
sandblasting, sublimation, image transfers, vinyl signs, banners, screen printing,
and promotional products. Jeff routinely applies graphics to a wide variety of
materials. Contact him at Jeff@creativegraphic.net.
John McDaniel is the co-owner of JHM Marketing in Albany, OR, which provides
consulting and training services for the industry. He worked for many years with
computers in electronic data processing and pioneered the use of CorelDraw
for engraving applications. He owned a retail personalized gift shop for over ten
years, and writes about hardware design, software, laser engraving, sublimation,
and more. He is a Corel Training Partner, and co-founder of the Association of
CorelDRAW Professionals. For information on training and more, call 541-967-
4271, or write to mail@CorelDRAWhelp.com.
Judy McDaniel is the co-owner of JHM Marketing in Albany, OR, which provides
consulting and training services for the industry. Her background includes many
forms of art and retail sales, as well as the operation of a retail personalized gift
shop for over ten years. She is a regular columnist on sandblasting, sublimation,
and diversifying business, as well as a Corel Training Partner, and co-founder of
the Association of CorelDRAW Professionals. She can be reached at 541-967-
4271, fax 541-967-4272, or via email at mail@CorelDRAWhelp.com.
David Milisock is president of Custom Graphic Technologies Inc. in Pennsylvania.
He has been in the print production business since 1975, and specializes
in professional support for CorelDRAW Graphics Suite. Output includes
computer-to-plate processes for all commercial digital front-end applications, as
well as Postscript-compliant graphic applications. He offers technical and color
management support for all RIP-driven corporate digital output systems. He can
be reached at 717-509-3523 or davidmilisock@comcast.net.
Deborah Sexton, former editor of Impressions Magazine, has been in the
apparel graphics industry since 1981. She currently does marketing and public
relations for apparel graphics companies, and is a columnist for several industry
publications.. She can be reached at dsexton@sbcglobal.net.
Otis Veteto is the Western Regional Manager for the R.S. Owens & Co. Inc.,
manufacturer and supplier of the Elegance in Awards & Gifts line. With more than
30 years experience in the industry, he offers the PROspective of a veteran
sales rep in reporting on ideas, people and places that he visits. Otis also presents
sales and motivation seminars. He can be reached in Sacramento, CA when
not on the road at 916-567-1867.
CorelDRAW
Help
BACK NEXT FULL SCREEN CONTENTS INFO SPONSORS
July 2009 34
Click ads to go directly
to advertisers web site.
Help CorelDRAW
by Otis Veteto
Traveling Tidbits
Otis Veteto is the Western
Regional Manager for the
R.S. Owens & Co. Inc.,
manufacturer and supplier of
the Elegance in Awards & Gifts
line. With more than 30 years
experience in the industry, he
offers the PROspective of a
veteran sales rep in reporting
on ideas, people and places
that he visits. Its a fun and
informative column focusing
on the human-interest side of
the industry. Otis also presents
sales and motivation seminars
for industry organizations,
and some of that knowledge
will rub off as well. He can be
reached in Sacramento, CA
when not on the road at
916-567-1867.
Las Vegas, Lone Pine, & the Next Level
NBA in Las Vegas
Here is something you might consider putting in your traveling plans
for J uly, 2010.IF you really like NBA Basketball. What I am talking
about is the NBA Summer League in Las Vegas, Nevada. This is a
1-week league in J uly, for newly drafted players, mixed with a few
1
st
and 2
nd
year veterans. Its exciting, fast-paced entertainment. The
prices are very reasonable, and there was no charge for parking.
You also have in-out privileges, so you can watch a game, leave,
and come back for another game later the same day.
Some of the more notable players I had a chance to watch recently
were J ason Thomson and Omri Casspi from the Kings; Stephen
Curry/Clippers; the #1 draft pick Blake Griffn/Clippers, and 73
Hasheem Thabeet/Grizzlies. Like I said, if you really like NBA
basketball, this might be a good place to visit next year in J uly
Oh yeah, the casinos are open also.
Lake Mead Food & Sights
And, as the saying goes if you want a good place to eat, fnd where
the locals go. Well, in the Lake Mead area, not far from the Hoover
Dam, the locals eat at the Harbor House Caf, located right on the
water in Horsepower Cove. Betty Gripentog owns the Las Vegas
Boat Harbor at Lake Mead and runs it with the help of her children,
their children, and even their children.
At the Marina you can rent a boat, take a sight-seeing cruise or
enjoy a nice meal. you can even feed the fsh off the pier. lake
Mead is 110 miles long and in some places over 500 feet deep.
Not too bad considering its in the desert. If you like to fsh, lake
Mead has trout, striped bass, bluegill, catfsh and boasts some of
the best largemouth bass in the country.
Lone Pine, Calif.
On the way back to Sacramento from Las Vegas I stayed overnight
in Lone Pine, CA, where they have a real unique movie museum.
The lone pine area has long been a favorite spot for flming both
movie and television westerns. Classics like Ambush starring
Hopalong Cassidy, and Charge of the Light Brigade starring Errol
Flynn, was flmed there. The Rawhide series for television was
flmed in the Alabama Hills around lone pine. Steve McQueen, Roy
Rogers, Kirk Douglas, and too many more to mention have chased
bad guys all through the hills around this little town.
Lone Pine is located at the base of Mt. Whitney. An interesting
tidbit: Mt. Whitney is the highest point in the contiguous United
States, at 14, 496, and it is only 90 miles from there to Death
Valley, which boasts the lowest point in the contiguous United
States at a spot called Badwater, which is at 282 below sea level.
If you are a western movie buff, on Oct 10-11, 2009, there is the
Lone Pine Film Festival featuring bus tours into the Alabama Hills,
movie stars, stuntmen, producers ad more. Check it out at www.
lonepineflmfestival.org
Taking it to the next level
I will close with a unique birthday gift idea. Editor Mike Neers
oldest son Matthew turned 21 this month, and Mike wanted to do
something special as a birthday gift. He chartered a single engine
Cessna prop airplane for a 1 hour fight over the Fresno, CA valley.
To Matthews surprise, the pilot let him handle the take-off and
landing. Talk about taking a birthday gift to the next levelhmm,
maybe thats what we all need to do with our businessesthink
about how to take our marketing to the next level with some kind
of unique promotion.
Thats all for now. Remember to save some time for yourself and
your family. And when you travel, please travel safe.
BACK NEXT FULL SCREEN CONTENTS INFO SPONSORS