The batch tanks include large center opening hatches with
removable lids to allow access to the inside of the tank.
The unit is equipped with an emission-certified engine that produces lesser quantities of pollution and smoke. The unit includes storage for up to 100 feet of suction hose and/or bulk hose, along with storage capacity for loose iron and high-pressure rotary hoses. Specifications Trailer Chassis 344 long kingpin to center of bogie Deck Engine Module Tier II emission certified Cat 3126B engine rated at 300 ohp at 2,4000 rpm Four hydraulic pumps Two Eaton ACL054 Series 2 Closed Loop Pump, two RexRoth AA10VG45 Closed Loop Pump Centifugal Pump Module 6 x 5 x 11 x 11 with Eaton fixed-displacement piston motor Batch-tank Modules 50 bbl tanks each with four agitators capable if variable speed control up to 135 rpm. Non-Radioactive Densometer MicroMotion DL200 mass flowmeter provides density of a fluid as an output parameter Cementing BMR-100 Batch-mixing Trailer www.halliburton.com Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale. H05019 06/06 2006 Halliburton All Rights Reserved Printed in U.S.A. The BMR-100 batch-mixing trailer is a 100 bbl capacity batch-mixer trailer designed by Halliburton for mixing oilfield slurries such as drilling muds and spacers. These units are built with a single-engine power pack, either one or two centrifugal pumps, two 50 bbl batch tanks with agitators, and an operator's platform with control stand. Batch tank agitators and centrifugal pumps are powered hydraulically and all power comes from the single-engine power pack. Features and Benefits The BMR-100 batch-mixer trailer was designed to incorporate a new emission-certified engine and to include safety and ergonomic features for improved use at the wellsite. This design can provide the following benefits: The engine package is mounted on rubber isolators on the gooseneck portion of the trailer, resulting in less noise and maintenance access to both sides of the engine. Personnel can safely stand and work on top of the flat-top 50 bbl batch tanks, as well as place sacks or buckets of material. The recirculation/booster pump is hydraulically operated for better speed control. The eductor hopper and elbow assembly for the blower hose can remain permanently mounted on top of the tank. The trailer includes an arrangement for the bulk blower hoses, wherein each elbow assembly can be tied together in a Y configuration so that a single bulk hose from the bulk truck can feed either batch tank. Each batch tank includes two clean, in-place spray nozzles to assist in scrubbing and washing the tanks after the job is complete. The fuel tank is mounted to allow the unit to be refueled at ground level. H A L 1 8 3 1 8