Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
User’s Manual
(Version 2.0)
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
【TABLE OF CONTENT】
2 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
9.1.1. Main Control Page........................................................................................76
9.1.2. Remote Search and Playback.....................................................................78
9.1.3. DVR Configuration .......................................................................................81
9.1.3.1. IE Client Configuration ...................................................................81
9.1.3.1.1. Event Action Plan Setup.....................................................81
9.1.3.1.2. Storage Setup ......................................................................82
9.1.3.1.3. Group Setting ......................................................................83
9.1.3.1.4. Sequence Setup ..................................................................84
9.1.3.2. Remote Site Configuration.............................................................85
9.2. Remote Access via PDA........................................................................................86
10. CMS1000_Lite...................................................................................................................90
10.1. Remote Access – with Remote Application......................................................90
10.2. Main Screen Introduction ...................................................................................91
10.3. Search & Playback ..............................................................................................94
10.4. Search by Time Mode .........................................................................................94
10.4.1. Other Functions Menu.....................................................................96
10.5. Search by Event Mode ........................................................................................97
10.6. Smart Search Mode.............................................................................................99
10.7. Manual Backup ..................................................................................................101
10.8. E-Map..................................................................................................................103
10.9. Add Map .............................................................................................................104
10.10. Delete Map .......................................................................................................107
10.11. Modify Map .......................................................................................................107
10.12. Screen Layout.................................................................................................. 110
10.13. System Configuration ..................................................................................... 111
10.13.1. System Setup ......................................................................................... 111
10.13.2. Network Server Setup............................................................................112
10.13.3. Playback Group Setup...........................................................................114
10.13.4. Connection Group Setup.......................................................................115
10.13.4.1. Add Server Video ......................................................................116
10.13.4.2. Group Setting ............................................................................116
10.13.4.3. Sequence Setup ........................................................................117
10.13.5. User Account ..........................................................................................119
10.14. PTZ Control......................................................................................................121
10.15. Event Log .........................................................................................................122
11. CMS2000 .........................................................................................................................124
11.1. Overview.............................................................................................................124
11.2. Benefits ..............................................................................................................124
12. Appendix .........................................................................................................................125
12.1. Access DVR Video Server from Internet .........................................................125
12.1.1. Network device connection: ...................................................................125
12.1.2. Network configuration(Stream Video via IE) .........................................125
12.1.3. DVR Video Server Configuration ............................................................125
12.1.4. Router Configuration ...............................................................................125
12.1.5. View by IE..................................................................................................126
12.1.6. Network configuration(Stream Video by Remote Client Software).....126
12.1.7. Router Configuration ...............................................................................126
3 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
1. DVR Software Guides
1.1. DVR Software Installation
Insert the DVR Installation CD into CD-ROM. Click 「DVR Install」 then click 「DVR
System」to follow the instructions to install the DVR software.
For first time login to DVR System, please use the default user account and password
shown below:
‧The default user account:「admin」
‧The default password:
「1234」
4 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
1.2. Main Control Panel Introduction
Name Description
4 Display the current date, time and feature status like remote access,
System Status Panel auto backup, storage space, email service and SMS service.
(Refer to chapter 1.2.1 for detail description)
5 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
event action plan and setup for remote view and control.
(Refer to chapter 6 for detail information)
Alarm Mode ※ Note: Alarm setup is found in the Add Event Action Plan dialog box in
chapter 6.7.
13 Click to exit the program. User name and password are required to
menu
18
Motion Detection Mode
This icon will appear when a motion is detected.
19 Display the status of each CCD camera. Blue means active video
Camera Status ※ Note: The number of orange camera icon represents the number of
camera supported by this particular DVR captured card. Thus the
20 Move the cursor to the top left corner of the screen to reveal the
(Please refer to chapter 6.1.2 for the location of the snapshot folder)
6 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
1.2.1. System Status Panel
2 3 4 5 6
Name Description
2 Remote Features When the remote services are activated, icon will display the status for
it.
3 Auto backup close When the backup service is activated, icon will display the status of backup
4 Storage Space After storage space feature is enabled, icon will display the ratio of used
5 Email Notification When email notification is activated, icon will display the status of email
7 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
service as mouse cursor moves over it.
6 SMS Notification When SMS service is activated, icon will display the status of SMS service
8 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
2. Search and Playback
This feature allows user to search and play recorded video.
2.1. Search by Time Mode
Search by Time feature enables user to search for video data according to the search
criteria set such as date and CCD camera. User can also use the sliding bar in the time
block selection menu to play the video of a specific time.
Name Description
Display the current date, time and feature status like remote features,
4 System Status Panel auto backup, storage space, email service and SMS service.
(Refer to chapter 1.2.1 for detail description)
6 Search by Time mode To search for video playback according to a defined date and time.
7 Smart Search mode To search for video playback according to a defined time period.
Date/Time selection To set the date and time as the search criteria.
9
panel
9 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
11 Calendar Box Select a date as the search criteria.
14 Other Function menu Please refer to chapter 2.1.1 for detail information.
Name Description
4 Save format. User can also adjust the brightness and contrast of
Click to print the playback images. User can also adjust the
5 Print
brightness and contrast of the image before printing it.
10 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
2.2. Search by Event Mode
This feature allows user to search for a specified event triggered video that occurs
during a set time period.
Name Description
Display the current date, time and feature status like remote
4 System Status Panel features, auto backup, storage space, email service and SMS
service.(Refer to chapter 1.2.1 for detail description)
6 Search by Time mode To search for video playback according to a defined date and time.
7 Smart Search mode To search for video playback according to a defined time period.
8 Event Time Select the date and time frame as the search criteria.
Select a CCD from the drop down menu and set it as the search
10 CCD menu
criteria.
11 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Click to adjust the playback speed of images/video. There are 8
12 Playback Speed mode
speed modes:1/16X, 1/8X, 1/4X, 1/2X, 2X, 4X, 8X, 16X
13 Other Function menu Please refer to chapter 2.1.1 for detail information.
Display a list of search results. Each event log shows the time, type
15 Log Panel status, device and event description. User can click on an event log
12 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
2.3. Smart Search Mode
This feature enables user to search for video of a specific camera within a specified
time range. In addition, user can also define a motion detection zone on the screen to
detect the number of motion event occur within that time period.
Name Description
Display the current date, time and feature status like remote features,
4 System Status Panel auto backup, storage space, email service and SMS service.
6 Search by Time mode To search for video playback according to a defined date and time.
7 Smart Search mode To search for video playback according to a defined time period.
8 Recorded Date/Time Display the recorded date and time of playback images.
10 Search Time Set a specific date and time frame as the search criteria.
11 Search button Click to start the search process according to the criteria set.
12 Add Search Area Highlight a search zone for motion detection. Green grid area shows
13 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
the highlighted search zone.
17 Other Functions Menu Please refer to chapter 2.1.1 for detail information.
Display a list of motion detection log list. The window shows the
19 Event list information recorded during motion detection. User can click on an
3. Manual Backup
User can create a backup data of recorded images or video. User can choose the location such
as an external hard drive or an additional internal hard drive to save the backup.
10
14 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Name Description
1 Backup device User can choose the device or location to store the backup data.
2 Free Space The system will display the available space for backup.
Select the CCD camera for backup. User may also choose Select All to
5 Backup Camera
backup data of all CCD cameras.
Click to estimate the space required to save the backup file. A warning
6 Storage Size
message will prompt the user for insufficient storage space.
7 Storage percentage Display the ratio of storage size and the total space in percentage.
15 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
4. E-Map
E-Map is a modifiable digital map that links to the surveillance system in the environment. User
can use e-map to define the organizational structure and operation of a company/organization,
accessing & control surveillance cameras. User can also use the program to add a new map,
delete map, modify map and edit camera position to suit the appropriate setting.
Name Description
2 CCD Camera This icon Display the location of CCD cameras on the map. Click
Display the current date, time and feature status like remote features, auto
3 System Status Panel backup, storage space, email service and SMS service.
(Refer to chapter 1.2.1 for detail description)
16 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Mode
Display the status of each CCD camera. Blue means active video signal.
10 Camera Status NOTE: The number of orange camera icon represents the number of
4.1.4 Click open to open an existing E-map file (saved in *.map format)
17 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
4.1.5. To add a map, select the level where a new map is to be added.
4.1.6. From the Map (M) drop down menu, select Add Map.
4.1.7. When Map Property dialog box appears, click on the browse button to
Note:
Images must be saved in the local Bin of DVR folder for the image to be displayed.
18 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
4.1.9. To add a camera, click on the Camera Icon and then left click once in the
image screen.
4.1.10. When the camera setup dialog box appears, fill the necessary information and click
“OK”
4.1.12. User can then login the system to view the changed E-Map.
19 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
4.2. Delete Map
4.2.1. To delete a map, click to select the map to be deleted.
4.2.2. Click on Delete Map from the Map (M) drop down menu.
4.3.3. When Map Property dialog box appears, click on the browse button to
Note:
Images must be saved in the local Bin of DVR folder for the image to be displayed.
20 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
4.3.5. To add camera, just click on the camera icon and then left click once in the
image screen
4.3.6. When the camera setup dialog box appears, fill the necessary information and click
“OK”
4.3.10. User can then login the system to view the changed E-Map.
21 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
5. Screen Layout Selection
This feature has 5 different layout formats. User can choose the desired screen layout to better
viewing images.
1 2 3 4 5 6
7 8 9 10 11
Name Description
Note:
The unsupported channels of a particular DVR captured card will appear grey.
22 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
6. DVR Configuration
6.1. System setup
Click on DVR Configuration in the Main Control Panel to display the system setup windows.
5 6
Name Description
1 Feature Panel Contains all DVR configuration features like system setup, camera
3 System Start-up setup User can configure the way program starts such as auto login, auto
4 Watchdog Setting User can configure the auto reset time of the system.
※ Note: Hardware compression card does not support this feature.
5 Camera Format Select the camera format that applies. There are 2 types of format:
6 Display mode Select the display mode that applies. There are 3 display modes:
23 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Note:
Each type of display mode is only compatible with a specific display driver. Please select the display
mode that is compatible with your display driver.
5
6
Name Description
1 Feature Panel Contain all DVR configuration features like system setup,
2 User Information Type in the user information such as user name, password,
an account.
3 Authority Setup Administrator can set the access authority for each user as
4 Add User Click to add the user account that has been created.
24 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Modify / Delete User Account
Click on the user account to be modified / deleted in left column.
1 2
3
4 5
6
7
Name Description
5 Camera Authority Setup User can assign user’s access authority to the
25 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
6.1.2. Storage Setup
Click “Storage Setup” to display the Storage setup windows.
1
2
3 4 5
6
10 8 9
11
Name Description
other tools.
record criteria.
6 Automated Backup User can enable the automatic backup feature which
configuration.
7 Automated Backup User can choose the storage device for automatic
backup.
8 Snapshot folder This is the location of the snapshot folder. All images
26 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
captured will be saved in this folder.
9 Event Reserve This is to keep all recorded events in the local system
27 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
6.2. Camera setup
Click “Camera Setup” to expand the selection menu and then click on a CCD to be
configured.
1 3 4
5
7 6
8
10
11
Name Description
tools.
2 Setting Application mode Click to apply the configured setting to only one or all
cameras.
3 General Setup User can assign the camera a name. User can click to
4 Display setting User can change the font size, font color and resolution
of the image.
5 Color Control User can select different color modes to represent the
6 Camera Color Control User can setup schedules to apply the different color
28 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
information)
images.
3 4
5
6 7
Name Description
1 Color Control Mode User can assign different preset color setting modes
2 Recording time selection User can click, hold and drag the mouse to select the
time frame.
To deselect the time frame, click on the time frame
and drag it out of the recording time bar.
3 Copy to button Click to copy the schedule of a certain day to a
different day.
4 Select All button Click to set the recording time frame over the entire
week.
29 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Note:
Please configure device setup first before configuring camera setup. Please refer to chapter 7.7 for
detail information.
2 3
1 4
5
6
7
8
9
10
11
12
13
14
Name Description
other tools.
2 Setting Application mode Click to apply the configured setting to one or all CCD
cameras.
3 Camera Record Schedule User can customize the recording mode to represent
information)
4 Camera Record Mode User can choose the record mode to display its
Setup information.
5 Description column Display the name of each recording mode. User can
30 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
delete default name and change the display name.
6 Event trigger recording Click to enable recording only when events trigger.
7 Normal Record rate User can adjust the recording frame rate in frame per
8 Normal record quality User can slide the bar to adjust the recording quality.
9 Event Record Rate User can adjust the event recording frame rate in
10 Event record quality User can slide the bar to adjust the recording quality.
11 Event Pre-record time User can set the pre-recording time prior to event
triggered recording.
12 Event Record time This is to set the length of time of each video.
31 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Camera Record Schedule – Weekday Schedule:
Name Description
1 Camera Record Mode User can choose from 7 different color modes to represent different
2 Recording time bar User can click, hold and drag the mouse to select the time frame.
To deselect the time frame, click on the time frame and drag it out of
3 Copy to button Click to copy the schedule of a certain day to a different day.
4 Select All button Click to set the recording time frame over the entire week
32 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Camera Record Schedule – Day Schedule:
Name Description
1 Camera Record Mode User can choose from 7 different color modes to represent different
2 Calendar Allow user to set a high priority schedule for a certain date.
9 Recording Time bar User can click, hold and drag the mouse to select the time frame.
To deselect the time frame, click on the time frame and drag it out of
33 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
6.2.2. Motion detection setup
Click “Motion Detection Setup” to display the setup windows.
Name Description
1 Feature Panel Contain all DVR configuration features like system setup,
camera setup, group setting, sequence setup, event action
2 Setting Application mode Click to apply the configured setting to only one or all
cameras.
3 Motion Detection User can customize the recording schedule for each motion
information)
5 Motion Mode Setup User can choose motion detection mode to display its
information.
6 Description column Display the name of each recording mode. User can delete
7 Event Interval time User can choose to set the length of an interval between two
34 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
triggered events.
9 Sensitivity mode User can slide the bar to adjust the detection sensitivity.
10 Add New Zone button Highlight a search zone for motion detection. Green grid area
11 Clear Selection Area Click and use the mouse to clear the area selected for motion
button detection.
12 Select All button Click the button to select the entire area for motion detection.
13 Clear All button Click to clear all area for motion detection.
Name Description
User can choose from 7 different color modes to represent
1 Motion Mode
different motion detection schedule from the drop down menu.
35 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
User can click, hold and drag the mouse to select the time
frame.
2 Recording time bar
To deselect the time frame, click on the time frame and drag it
out of the recording time bar.
3 Copy to button Click to copy the schedule of a certain day to a different day.
4 Select All button Click to set the recording time frame over the entire week.
5 Clear All button Click to clear all recording time frame.
6 OK button Click to save the changes.
7 Cancel button Click to cancel the changes.
Name Description
1 Motion Mode User can choose from 7 different color modes to represent
2 Calendar Allow user to set a high priority schedule for a certain date.
36 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
5 Move forward button Click to move to a day ahead.
9 Recording Time bar User can click, hold and drag the mouse to select the time frame.
To deselect the time frame, click on the time frame and drag it out
2
1
3
4
Name Description
1 Feature Panel Contain all DVR configuration features like system setup,
2 PTZ Device Select the correct PTZ device model from the drop down
4 PTZ Home Position Assign each PTZ device a number to indicate its location for
easier identification.
37 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
5 Image Display Screen Display images captured from its PTZ device at its preset
location.
1 2
3
6
7
8
9
10
Name Description
1 Setting Application mode Click to apply the configured setting to the current sensor only.
information)
5 Camera Click to select the camera that will respond to the sensor
output.
6 Sensor Setup mode User can select different sensor modes to represent different
sensor settings.
38 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
7 Description User can identify each sensor setting with short description.
8 Event Interval Time Click to set the event interval time for each sensor.
Attention:
Sensor feature is only supported by software compression DVR card. Thus, sensor setup will only appear
4
5
3 6 7
Name Description
1 Sensor Mode User can choose from 7 different color modes to represent
2 Recording time bar User can click, hold and drag the mouse to select the time frame.
To deselect the time frame, click on the time frame and drag it out
3 Copy to button Click to copy the schedule of a certain day to a different day.
4 Select All button Click to set the recording time frame over the entire week.
39 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Sensor Schedule – Day Schedule:
9 2
4 5
3 6
7 8
Name Description
1 Sensor Mode User can choose from 7 different color modes to represent
2 Calendar Allow user to set a high priority schedule for a certain date.
9 Recording Time bar User can click, hold and drag the mouse to select the time
frame.
To deselect the time frame, click on the time frame and drag it
40 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
6.4. DO Setup
Name Description
Attention:
DO feature is only supported by software compression DVR card. Thus, DO setup will only appear
3
2
4
1
8
6
9
7
5
10
11
41 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Name Description
other tools.
surveillance group.
7 Move/Remove button
Click “>>” to remove the selected CCD camera from the
surveillance group.
42 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
6.6. Sequence setup
This chapter explains how to setup the display of camera groups in a sequential order. User
can configure the sequence mode to be turned on automatically or manually.
2 3
5
1
7
10
9
8 6
11
12
13
Name Description
1 Feature Panel camera setup, group setting, sequence setup, event action
43 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Click “>>” to remove the selected surveillance group from the
sequence.
3
4
5
6 7
Name Description
1 Sequence Mode User can choose from 7 different color modes to represent
2 Recording time bar User can click, hold and drag the mouse to select the time
frame.
To deselect the time frame, click on the time frame and drag it
3 Copy to button Click to copy the schedule of a certain day to a different day.
44 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
4 Select All button Click to set the recording time frame over the entire week.
4 5
3 6
7 8
Name Description
2 Calendar Allow user to set a high priority schedule for a certain date.
User can click, hold and drag the mouse to select the time
9 Recording Time bar
frame.
45 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
To deselect the time frame, click on the time frame and drag it
2 3 4 5
Name Description
1 Feature Panel Contain all DVR configuration features like system setup, camera
46 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
4 Modify Click to change the criteria of the selected event action plan.
(Refer to chapter 6.7.3 for detail information)
7 Information Screen List all the changes that have been made to an action plan.
47 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
6.7.1.1. Click “Add New” to display the add action plan dialog.
48 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
6.7.1.5. Select a CCD camera from the Camera drop down menu.
6.7.1.7. When a dialog box appears, type in the suitable features and click “OK” to
save all changes.
6.7.1.8. Click on “Event Schedule” to display the Event Schedule dialog box.
NOTE:
User can apply the system preset sound file (C:\DVR\bin\sounds\NotifyMenu.wav) to
features like phone notify and play warning sound.
49 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Event Schedule - weekday:
2
3
4
5 6
Name Description
1 Recording time bar User can click, hold and drag the mouse to select the time
To deselect the time frame, click on the time frame and drag it
2 Copy to button Click to copy the schedule of a certain day to a different day.
3 Select All button Click to set the recording time frame over the entire week.
50 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Event Schedule – Day:
3 5
2 4
6 7
Name Description
date.
8 Recording Time bar User can click, hold and drag the mouse to select the time
frame.
51 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
6.7.2. Delete action plan
6.7.2.1. Select the action plan to be deleted and click “Delete”
6.7.2.2. When a warning dialog box appears, click “Yes” to confirm the deletion
6.7.3.2. The dialog box of the selected action plan will be displayed.
6.7.3.3. After making all the changes. Click “OK” to save all changes
52 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
6.7.4.2. A new copy of action plan will show on the action plan screen.
53 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
6.8. Network Setup
1 4
5
6
8
9
10
Name Description
1 Feature Panel Contain all DVR configuration features like system setup,
2 Web Server mode Click to enable web server for remote viewing and control
3 Time Synchronize mode Click to enable the time of the system to be synchronized to
4 Remote Viewer Limit Click to enable connections from remote sites for viewing
5 Remote Play Limit Click to enable user to access the playback feature of the
6 Starting Port Base This port allows remote site users to connect to the local
54 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
7 Email Setup Fill in the email information like server name, email address,
8 Login Authority Enable mail server to login with the assigned username and
password.
3 4
5
1
Name Description
1 Feature Panel Contain all DVR configuration features like system setup, camera setup,
group setting, sequence setup, event action plan setup, network, device
2 PTZ device Display the information of the PTZ device includes: PTZ device model,
setup COM port, transfer rate, parity, data bits, stop bits and flow control.
User can configure device parameters from the drop down menus.
55 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
5 SMS Setup This feature allows user to receive warning messages from the
Select the appropriate COM port and transfer rate from the drop down
menu.
※ Note: Modem must be installed to enable this feature.
6 Modem Setup Select the installed modem device from the drop down menu.
Note:
Configure device setup first before configuring camera setup. This is to enable PTZ to function properly.
56 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
6.10.2.1. In the main panel of DVR2008, click on the to get into the configuration
diagram. Select “ConnectIBServer” as shown in Fig07.
6.10.2.2. Disable the checking box of “Disconnect” as shown in Red box1 of Fig07
6.10.2.3. Input the IP address and Port number (always 80) as shown in Red box2 of
Fig07.
6.10.2.4. Input the mapping channel number in the DVR2008 for connected IVS server.
57 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
58 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
59 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
60 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
6.11.2.2. Update KGA400 configuration
Type in new IP address/Subnet Mask/Gateway for the KGA400 (as shown in Red Box
1 of Fig02).
Update the setting as shown in Red Box2
Socket Port: 4660
Interface: RS232
Baud rate: 9600
And then click on “Update” icon to save the new setting of KGA400
Click on in the DVR2008 Main Panel to get into the configuration diagram.
6.11.3.1. Add POS Device
A. Select POS DEVICE, and click on “Add” Icon to add new POS device
and the “Add POS device” will popup
61 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
<Fig.03>
B. Select “IP” as the connection mode with POS (KGA400) as shown in Redbox1 of Fig.04
C. Type in the POS name (as shown in Redbox2 of Fig04)
D. Choose a camera for mapping with new POS device (as shown in Redbox3 of Fig04)
E. Type in the IP address & Port Number of KGA400 that is connecting with POS machine.
F. Click on OK to save the setting
62 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
6.11.3.2. POS data monitoring and search
When a new POS connecting is successfully setup, the POS transaction
data will be shown on the OSD of the mapped camera video.
Move the mouse cursor on the related camera and click on the Right Mouse Button to show
up the pop-up list. Select the “POS event” to do POS event monitoring or search.
63 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
64 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Name Description
1 Feature Panel Contain all DVR configuration features like system setup,
Information
5 Setting Application mode Click to apply the setting of the opened configuration file
65 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
6.13. DDNS
When you access internet and run DVR system by dynamic IP, it is suggested that you should use the
DDNS Client to define a domain name via internet. This application will update the newest IP address
from your DVR system to DDNS server every 10 minutes. You just have to type your register hostname
to get the internet connection, if your DVR system IP address is changed.
This application uses port 80 and 81 to upload IP info to internet. If your DVR system is built under
router or firewall, please make sure that port 80 and 81 are already enabled. DDNS Client is able to
upload Global IP address only. If your system uses virtual IP address, users please map the port 80 and
81communication port to DVR server.
Name Description
1. User Your register name.
2. Password. Your own account password.
3. Run at startup If checked, DDNS client will run when system starts up.
4. Register Register a new account.
5. Save Manual updates IP address to dynamic DDNS server
6. Forgotten passw If you forget your password, system will help you get a new
one.
7. Status Info Information about the connection will show in this area
66 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Step 2: Please input user name into username column. The maximum digit of username is 16
characters; username can not be started with spaces or minus signs (‘-’). Username will be your
hostname.
Step 3: Please input e-mail address into the E-Mail Address column. It is necessary to input your
e-mail address because when you forget your password, system will send login info to you via
e-mail.
Step 4: Please input password into the Password column, and re-type the same password into the
Re-type Password column. System will confirm whether these two are the same.
Step 5: Please input the word, “bjopwemetj”, existing in the yellow box into the column of “Enter
the characters as in the box below:”.
67 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
screen below.
Step7: Please input your username and password to the User and Password columns. Press
68 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
6.13.2 Update IP address
User: Input your register name into this column. For example, just type “matrix”, if you typed
“matrix” in the column of username in the step above.
Hostname: Your DVR surveillance system hostname. Hostname is combination of your
username and “dvrip.com.tw”. For example, if the hostname is “matrix.dvrip.com.tw”, then you
can connect your DVR server via internet by typing the “matrix.dvrip.com.tw” in the URL column
in your IE browser.
IP: Your DVR system IP address. DDNS Client will update the last IP address every 10 minute
age.
69 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
6.13.3 Forgotten password
Step1: If you forget your password to login DDNS server. Please press , and
then a dialogue box for entering username will appear automatically shown as below.
Step2: Input your username into Username/Hostname column, and then input the word check
into the column. For instance, users should input “hrbdknvqqa” to the column of “Enter the
characters as in the box below”. Finally, please click the button to go into next
step.
Step3: Use outlook or any e-mail tools to receive e-mail. Open the mail, and click the link in the
mail.
70 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Step5: Please input your new password into “New Password column”, and re-type it into “New
71 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
7. PTZ Camera Control
This chapter explains how to configure the PTZ function and its preset points for each camera.
Name Description
3 Recording Date/ Time Display the actual recording date and time.
4 System Status Panel Display the current date, time and feature status like remote
features, auto backup, storage space, email service and SMS
service.(Refer to chapter 1.2.1 for detail description)
5 Set PTZ Preset Point Allow user to preset the PTZ device location with identification.
6 Goto PTZ Preset Point Click to access images captured from its PTZ device at a preset
location.
7 Feature expansion keys F1 key contains some additional features that may support the PTZ
expansion purpose.
Note: Please refer to PTZ device manual for detail information on
additional feature support.
72 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
11 Focus Allow user to adjust the focus setting of the camera.
14 Color Setting User can adjust the Hue, Contrast, Brightness and Saturation of the
image.
73 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
8. Event Log
Event Log will display information regarding all the triggered events and system events for
reporting purpose. User can search to review this record, save the log file or print it according to
the criteria set.
4
1 6
7
2 8
3 5 9
10
11 12
Name Description
1 Event Type User can select an event type from the drop down menu as the search
criteria.
2 Event Status User can set an event status as the search criteria.
3 CCD No. User can select a specific CCD as the search criteria.
4 Event Time User can set date and time period as the search criteria.
7 Save As Click to save the event log in excel or HTML file format.
9 Clear Event and video Click to delete the selected event or video log result from the list.
10 Search Result Display the information of the search results including its recording
time, event status, device, event type, event description, log viewer
11 Acknowledge Click to show that a particular event log has been checked.
74 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
9. Remote Access
9.1. Remote Access via Internet Explorer (IE)
User can access the central DVR server from any location via IE. This enables user to do
remote controlling, playback recorded images/video, monitoring, recording, viewing local
sites, creating event log and E-Map monitoring.
※ Type in the IP address of the Central Management Server to access the remote view.
※ Type in the User Name and Password.
Default User Name: 「admin」
Default Password: 「1234」
75 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
9.1.1. Main Control Page
Name Description
1 Function Panel Please refer to the next section on function panel for detail
description.
4 System Date / Time Display the date and time of the video.
5 Snapshot Move the cursor to the top left corner of the screen to reveal the
(Please refer to chapter 9.1.3.1.2 for the location of the snapshot folder)
Function Panel
Name Description
1 Remote View Click to connect to the Central server to view live images.
76 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
2 Search & Playback Search and playback recorded images and video.
(Please refer to chapter 9.1.2 for detail description)
3 DVR configuration Allow remote users to access IE client based configurations such
chapter 6.7
77 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
9.1.2. Remote Search and Playback
78 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Name Description
4 Date/Time selection panel To set the date and time as the search criteria
10 Time Block selection menu The blue segment indicates video recorded timeline.
groups.
detected.
※ Note: Alarm setup is found in the Add Event Action Plan
dialog box in chapter 6.7.
79 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Name Description
4 Date/Time selection panel To set the date and time as the search criteria
6 CCD menu Select a CCD from the drop down menu and set it as the
search criteria.
80 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10 Log Panel Display a list of search results. Each event log shows the
detected.
※ Note: Alarm setup is found in the Add Event Action Plan
2
3
Name Description
Event Action Plan User can assign the event camera display time
1
and customize the warning sound.
81 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
9.1.3.1.2. Storage Setup
2
3
Name Description
2 Record File Folder User can choose the folder to store record files.
3 Recording Length User can set the limit for each recording file.
82 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
9.1.3.1.3. Group Setting
1
2
7
5
8
6 4
9
10
Name Description
screen
5 Camera Display screen Display all the CCD cameras available for user to
6 Move/Remove button Click “<<” to add the selected CCD camera into a
surveillance group.
83 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
9.1.3.1.4. Sequence Setup
1 2
4
8
6
9 5
7
10
11
12
Name Description
4 Sequence Schedule User can customize the recording time for each
surveillance sequence on a weekly/daily basis.
(Refer to the chapter 6.6 on Sequence Schedule section for
detail information)
7 Move/Remove button Click “<<” to add the selected surveillance group into
a sequence.
sequence.
sequence.
84 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10 Interval time Set the interval time of each surveillance group within
a sequence.
85 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
9.2. Remote Access via PDA
9.2.1. Connect your mobile to the PC via USB.
9.2.2. Insert DVR 2008 Installation CD to initiate the Autorun process.
9.2.4. When a separate window pops up, copy the RemoteViewer Setup.Cab file to the
mobile device and install the function from the device terminal. (Please refer the
your respective mobile user guide on how to copy file from PC to your device)
9.2.5. After finished program installation, there is a program name “Remote Viewer” in all
programs.
86 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
9.2.6. Click the settings below the left that to set connection.
87 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
9.2.7. Click the graphic of below the left to add new connection.
9.2.8. To fill in a name, server IP, ID and password then click “OK”.
88 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
9.2.10. Choose one that you want to connecting then click “connect”.
89 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10. CMS1000_Lite
CMS1000_Lite is a surveillance network server that allows user to connect, view and control a vast
number of DVR systems through internet.
90 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.2. Main Screen Introduction
Name Description
4 System Date/Time Display the current date and time of the system.
cameras.
(Refer to chapter 4 for detail information)
91 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
view and control.
(Refer to chapter 6 for detail information)
10 PTZ Camera Control Pan/Tilt/Zoom (PTZ) Speed Dome configuration and control
panel.
(Refer to chapter 7 for detail information)
11 Event Log Record all triggered events and system events in a log file.
(Refer to chapter 8 for detail information)
detected.
Note: Alarm setup is found in the Add Event Action Plan dialog box
in chapter 6.7.
server.
14 Exit Button Click to exit the program. User name and password are
menu
18 DVR server selection Click Camera Status to display all the DVR servers that are
When click View Log it will display the DVR log information.
19 DVR Status Display the status of each DVR. Green represents successful
recorded video.
92 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
20 Snapshot Move the cursor to the top left corner of the screen to reveal
(Please refer to chapter 10.13.1 for the location of the snapshot folder)
21 Audio An audio icon will appear when the cursor is moved to the
93 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.3. Search & Playback
This feature allows user to search and play recorded video.
10.4. Search by Time Mode
Search by Time feature enables user to search for video data according to the search
criteria set such as date and CCD camera. User can also use the sliding bar in the time
block selection menu to play the video of a specific time.
Name Description
4 System Time/Date Display the current date and time of the system.
9 Date/Time selection panel To set the date and time as the search criteria.
94 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
11 Calendar Box Select a date as the search criteria.
14 Other Function menu Please refer to chapter 3.1.1 for detail information.
17 Time Block selection menu to select the time segment and press “play” in the playback
95 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.4.1. Other Functions Menu
Name Description
5 Print Click to print the playback images. User can also adjust
6 Color Setting Adjust the Hue, Contrast, Brightness and Saturation of the
image.
96 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.5. Search by Event Mode
This feature allows user to search for a specified event triggered video that occurs during a
set time period.
Name Description
4 System Time/Date Display the current date and time of the system.
5 Search by Event mode To search for video playback according to a defined event type
6 Search by Time mode To search for video playback according to a defined date and
time.
7 Smart Search mode To search for video playback according to a defined time period.
8 Event Time Select the date and time frame as the search criteria.
10 CCD menu Select a CCD from the drop down menu and set it as the search
criteria.
11 Playback Control Playback control buttons. Step backward, backward play, pause,
12 Playback Speed mode Click to adjust the playback speed of images/video. There are 8
97 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
speed modes:
13 Other Function menu Please refer to chapter 2.1.1 for detail information.
15 Log Panel Display a list of search results. Each event log shows the time,
98 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.6. Smart Search Mode
This feature enables user to search for video of a specific camera within a specified time
range. In addition, user can also define a motion detection zone on the screen to detect the
number of motion event occur within that time period.
Name Description
4 System Time/Date Display the current date and time of the system.
6 Search by Time mode To search for video playback according to a defined date and time.
7 Smart Search mode To search for video playback according to a defined time period.
8 Recorded Date/Time Display the recorded date and time of playback images.
10 Search Time Set a specific date and time frame as the search criteria.
11 Search button Click to start the search process according to the criteria set.
Highlight a search zone for motion detection. Green grid area shows
12 Add Search Area
the highlighted search zone.
99 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
13 Delete Search Area Delete the selected search zone.
17 Other Functions Menu Please refer to chapter 2.1.1 for detail information.
Display a list of motion detection log list. The window shows the
19 Event list information recorded during motion detection. User can click on an
100 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.7. Manual Backup
User can create a backup data of recorded images or video. User can choose the location
such as an external hard drive or an additional internal hard drive to save the backup.
3
4
7
10
9 8
Name Description
1 Backup device User can choose the device or location to store the backup
data.
2 Free Space The system will display the available space for backup.
5 Backup Camera Select the CCD camera for backup. User may also choose
6 Storage Size Click to estimate the space required to save the backup file.
storage space.
7 Storage percentage Display the ratio of storage size and the total space in
percentage.
101 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
8 Cancel button Click to cancel the backup program.
102 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.8. E-Map
E-Map is a modifiable digital map that links to the surveillance system in the environment.
User can use e-map to define the organizational structure and operation of a
company/organization, accessing & control surveillance cameras. User can also use the
program to add a new map, delete map, modify map and edit camera position to suit the
appropriate setting.
Name Description
2 CCD Camera
This icon Display the location of CCD cameras on
corresponding camera.
3 System Date/Time Display the current date & time of the system.
organization.
7 Surveillance Group menu Select to display the viewing channels of surveillance groups.
8 DVR server selection panel Click Camera Status to display all the DVR servers that are
103 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
When click View Log it will display the DVR log information.
9 DVR Status Display the status of each DVR. Green represents successful
104 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.9.4. Click open to open an existing E-map file (saved in *.map format)
10.9.5. To add a map, select the level where a new map is to be added.
10.9.6. From the Map(M) drop down menu, select Add Map.
105 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.9.7. When Map Property dialog box appears, click on the browse button to
Note:
Images must be saved in the local Map folder of CMS1000-Lite for the image to be
displayed.
10.9.8. Assign a map name and then click “OK” to open the image.
10.9.9. To add a camera, click on the Camera Icon and then left click once in
the image screen.
10.9.10. When the camera setup dialog box appears, fill the necessary information
and click “OK”
106 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.9.12. User can then login the system to view the changed E-Map.
107 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.11.1. Select the map to be modified from the organization tree on the left column.
10.11.2. Click on Map drop down menu to select Modify Map.
10.11.3. When Map Property dialog box appears, click on the browse
10.11.6. To add camera, just click on the camera icon and then left click
once in the image screen.
10.11.7. When the camera setup dialog box appears, fill the necessary information
and click “OK”
108 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.11.11. User can then login the system to view the changed E-Map.
109 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.12. Screen Layout
1 2 3 4 5 6
7 8 9 10 11
Name Description
110 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.13. System Configuration
10.13.1. System Setup
3
2
Name Description
1 System Start-up setup User can configure the way program starts such as auto login,
2 Snapshot Folder User is to specify the path of the folder for snapshot photo to be
saved.
3 Event Reserve Days Set the day for each recorded events to be reserved on the local
system.
4 Enable Time Synchronize Click to enable the time of the system to be synchronized with
the time of NTP time server. Type in the IP address of the NTP
5 Event Action Plan Setup User can determine the display time length for each event
User can also setup the alert sound file to be played upon an
event trigger.
111 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
6 Display mode Select the display mode that applies.
1 2
Name Description
Add Server Please refer to the next section on Add Server for detail
information.
Server Setup Information the network such as server name, server IP, connection mode
4 Search Network Server Click to search all the available servers on the network.
112 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
7 Cancel Click to cancel the changes.
5 6
Name Description
113 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.13.3. Playback Group Setup
3
1
4
8
7 5
Name Description
5 Display all the CCD cameras available for user to assign into
Camera Display screen
surveillance groups.
surveillance group.
Move/Remove button
Click “>>” to remove the selected CCD camera from the
surveillance group.
114 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.13.4. Connection Group Setup
1 2
Name Description
1 Add New Connection Group Click to add a new connection group to the server.
3 Connection Group Information The window displays the connection groups found
115 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.13.4.1. Add Server Video
‧ Click on the name of the server (test) just created under
‧ Connection Group Setup to call up the Add Server Video window.
‧ Click on the test icon to display all the cameras.
‧ Highlight all the video cameras to be added and then click Add and Exit
the window.
1 3
10.13.4.2.Group Setting
1 2
7
4
6
116 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Name Description
screen
4 Camera Display screen Display all the CCD cameras available for user to
5 Move/Remove button Click “<<” to add the selected CCD camera into a
surveillance group.
2
1
3
7 5
8
6
Name Description
117 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
3 Delete button Click to delete a selected surveillance sequence.
4 Sequence Schedule User can customize the recording time for each
detail information)
into a sequence.
sequence.
within a sequence.
within a sequence.
118 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.13.5. User Account
1 2
4
5
6
Name Description
2 User Authority Display all the access authorities that are given
3 View Group Display all the available groups that have been
setup.
119 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
User Account Dialog Box
Click on Add User /Modify User to call up the dialog box.
1
2
3
4
5 6
Name Description
1 User Name Assign each user a user name to log into the system.
120 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.14. PTZ Control
Name Description
3 Recording Date/ Time Display the actual recording date and time.
4 System Time/Date Display the current date and time of the system.
5 Set PTZ Preset Point Allow user to preset the PTZ device location with identification.
6 Goto PTZ Preset Point Click to access images captured from its PTZ device at a preset
location.
7 Feature expansion keys F1 key contains some additional features that may support the PTZ
expansion purpose.
Note: Please refer to PTZ device manual for detail information on
121 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
10.15. Event Log
Event Log will display information regarding all the triggered events and system events for
reporting purpose. User can search to review this record, save the log file or print it
according to the criteria set.
6 8
1
9
2
3 10
4 5 11
7
12
13 14
Name Description
User can select an event type from the drop down menu as
1 Event Type
the search criteria.
2 Event Status User can set an event status as the search criteria.
3 CCD No. User can select a specific CCD as the search criteria.
6 Event Time User can set date and time period as the search criteria.
Click to delete the selected event or video log result from the
10 Clear Selected Event
list.
12 Search Result recording time, event status, device, event type, event
122 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
13 Acknowledge Click to show that a particular event log has been checked.
123 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
11. CMS2000
11.1. Overview
CMS2000 is the only security solution that offers multiple point access and multiple device
integration over a network system. To increase its diversified capability, the system is fully
compatible with almost all of Kguard security solution series including DVS, standalone
DVRs and DVR cards. CMS2000 is designed for its IP based versatility and its integrability
with DVR and DVS to enhance its security integrity. Therefore administrator and authorized
clients can easily monitor and control the activities and security of their respected settings
and playback recorded data just with a click on the CMS2000 network.
11.2. Benefits
1. Multi-Level Authority Control
2. E-map graphic control menu
3. Multiple camera real-time monitoring
4. Historical video data playback
5. Control up to 100/300/600 Cameras
6. Remote control management
7. Hybrid system integration
8. Web-based structure design
NOTE:
This DVR system fully supports Kguard CMS2000 security solution series. Please refer to the following
for detail description on CMS2000.
124 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
12. Appendix
12.1. Access DVR Video Server from Internet
12.1.1. Network device connection:
The diagram below shows the connection architecture of a local network to the
Internet / WAN:
This example illustrates the connection of an ADSL Router to the ADSL Modem
(ATU-R). The ADSL has a physical IP Address (eg: 111.222.333.444), and all the
other PCs in the local network (LAN) are connected to the ADSL Router to share
the same physical IP address.
In this example, the Local IP address of the ADSL Router is 192.168.0.1 and the
local IP address of the DVR Video Server is 192.168.0.22.
125 www.kguardsecurity.com
KGUARD DVR 2008_v2.0 User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------
Note:
The configuration of different Routers could be different, please refer to the user manual of
your own Router for configuration information.
12.1.5. View by IE
In the previous 2 steps, the port: 8080 is mapped from the Video Server
(192.168.0.22) to the public.
This enables users to access the site remotely by typing in
“http://111.222.333.444:8080” in the IE address bar.
Please note that user must first input the username and password in order to enter
the system.
126 www.kguardsecurity.com
82010-00200-11000