Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
BAT Switch AC TIE Switch (1, 2, 3) DC Tie Switch (1 & 3) EXT PWR Switch ADG ELEC Switch System Select Switch
>Connects/Disconnects Batt from Bat bus and charger >In Manual mode, Switch controls the >Switch controls AVAIL – Illuminates Extinguished (default >Allows selection
>Switch operates in Auto or Manual Bus Tie Relay. RCCBs in Man mode when EXT pwr is mode after ADG is between Auto and Man
>ON (Off light extinguished) >ARM illuminates in Auto mode. >Switch inop in Auto available. deployed) – ADG will >SELECT will
- Batt powers Batt Bus (if AC pwr is not available) mode ON – When AVAIL is power L EMER AC illuminate if system
- Batt charger allowed to charge, except when: ARM – Illuminates when bus tie relay is bus and AUX hyd reverts to Man.
illuminated, pressing
- EMER pwr is in use open and switch is in ARM position OFF – DC Tie Bus is switch provides external pump 1. Pressing the switch
- Inverter powered refueling is being used OFF – Bus tie relay is open and switch open due to: pwr to the AC Tie Bus. extinguishes SELECT,
ON – ADG pwrs L &
- AC power is not present at charger input is in the OFF position. Busses are - Switch pushed (Man) When AC Tie Bus is and locks the system in
R EMER AC & DC
>OFF (Off light illuminated) isolated from Tie Bus. or powered, ON illuminates. Manual.
- Batt disconnects from Bat Bus busses, batt chrgr and
- RCCB protective trip Pressing switch again >MANUAL – System
- Charger is inhibited OFF & ARM Extinguished if Bus Tie batt bus. (Aux hyd
disconnects external pwr . operating in Man mode
Relay is closed pump no longer pwrd)
- Auto transfer of EMER pwr is inhibited
EMER PWR OFF/ARM/ON Selector DRIVE Switch (1,2,3) GEN Switch (1,2,3) APU PWR Switch Emergency Power