Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
100
90
80
70
60
50
40
30
20
10
0
0.074 0.14 0.25 0.42 0.84 2.00 4.76 9.51 25.4 50.8 38.1 19.0
ZONA 3
ZONA 2
ZONA 1
ABERTURA EN MILIMETROS
FIGURA 1- Zonas de especificaciones granulomtricas para materiales de sub-base y base.
ESTUDIOS GEOTCNICOS PARA INGENIERA DE DETALLE EN SUBESTACIONES
ESPECIFICACIN
CFE C0000-44
10 de 11
021213 Rev 110926
[5] ASTM D1587-2000 Standard Practice for Thin- Walled Tube Sampling of Soils for
geotechnical Purposes. Standard Test Method for Thin-Walled
Tube Sampling of Soils.
[6] ASTM D2166 Standard Test Method for Unconfined Compressive Strength of
Cohesive Soil.
[7] ASTM D2216-1998 Standard Test Method for Laboratory Determination of Water
(Moisture) Content of Soil and Rock by Mass. Standard Test
Method for Laboratory Determination of Water (Moisture) Content
of Soil, Rock, in Soil-Aggregate Mixtures.
[8] ASTM D2435 Standard Test Method for One-Dimensional Consolidation
Properties of Soils.
[9] ASTM D2487 Standard Classification of Soils for Engineering Purposes.
[10] ASTM D2850 Standard Test Method for Unconsolidated, Undrained Compressive
Strength of Cohesive Soils in Triaxial Compression.
[11] ASTM D4767 Standard Test Method for Consolidated Undrained Triaxial
Compression Test for Cohesive Soils.
[12] ASTM D4546 Standard Test Method for one-dimensional swell or settlement
potencial of cohesive soils.
ESTUDIOS GEOTCNICOS PARA INGENIERA DE DETALLE EN SUBESTACIONES
ESPECIFICACIN
CFE C0000-44
11 de 11
021213 Rev 110926
FE DE ERRATAS
En el captulo 5 CARACTERSTICAS Y CONDICIONES GENERALES, en el subinciso 5.4.1.2 inciso b).
Dice:
b) Uno por cada 15 m
2
de construccin en casetas, edificios y transformadores.
Debe Decir:
b) Uno por cada 150 m
2
de construccin en casetas, edificios y transformadores.