Sei sulla pagina 1di 58

FIRE FIGHTING COURSE

Welcome aboard!
Fire Brigade
Course
Crew 871 Egypt
FIRE FIGHTING COURSE
Sorry!
Fire Brigade
Course Today
From 5:30 to 6:45 pm
Thanks for you
cooperation...
Course Contents
Part 1 FIRE
Part 2 FIRE EXTINCTION
Part 3 FIRE PREVENTION
Part 4 PRACTICAL DEMONSTRATION
AND PRACTICE
FIRE FIGHTING COURSE

Part 1





FIRE
FIRE FIGHTING COURSE
1.1 What is Fire ?

Fire is a chemical reaction called combustion resulting in the release
of heat and light.

To initiate and maintain this chemical reaction, there are three factors
which must be present at the same time in order for a fire to occur.

They are the following;

Fuel Combustion substance either solid, liquid or gas.
Oxygen Air containing approx. 21% oxygen.
Heat The attainment of a certain temperature (a fire
normally maintains its own heat supply).
FIRE FIGHTING COURSE
FIRE FIGHTING COURSE
1.2 THE FIRE TRIANGLE

Fire will exist when all 3 elements of the fire triangle are present.
1.3 Spreadings ways of the Fire

There are three ways for the fire for spreading:

1. Radiation
2. Conduction
3. Convection


FIRE FIGHTING COURSE
1.3 Spreadings ways of the Fire

Radiation


FIRE FIGHTING COURSE

1.3.3 RADIATION

Combustible materials can be ignited if they are situated close to a
radiation source.

The heat energy is transferred from the source to the combustible
material by means of electro-magnetic radiation.

Electric fire.

Sun's rays magnified through glass.
FIRE FIGHTING COURSE
1.3 Spreadings ways of the Fire

Conduction


FIRE FIGHTING COURSE
1.3 HOW FIRE SPREAD

1.3.1 CONDUCTION
Heat applied to a solid is conducted through the material to heat up its
entire area.
The heat energy is transferred from one molecule to the next
throughout the entire area of the solid.
Steel supporting beams which can transfer heat to numerous locations
in a building. Contact between the beam and combustiblematerial at
any point could start a fire.
Pipework for heating systems in a building.
Electrical wiring.
FIRE FIGHTING COURSE
1.3 Spreadings ways of the Fire
Convection


FIRE FIGHTING COURSE

1.3.2 CONVECTION

Convection helps to spread fire from one location to another. This is
done by means of thermal air currents.

Fire heats up the air causing it to expand and become less dense. The
hot air rises and move away from the fire. At the same time, more
cooler air is drawn towards to fire to aid combustion and it is heated up
in the same way causing the process to continue.

The result is a circulation and spreading of heat, hot gasses and
possibly burning embers.

FIRE FIGHTING COURSE

1.4 FIRE CLASSIFICATION

There are four main classes for fire:


These classifications depend on the nature of the material which is
burning.

FIRE FIGHTING COURSE

Class A Solid materials: free burning combustibles such as wood,
paper, fabric, plastic, etc...


FIRE FIGHTING COURSE

Class B Flammable liquids: oils, petrol, alcohol, greases,
paint, varnishes, etc.


FIRE FIGHTING COURSE

Class C Flammable gases: propane, butane, acetylene, etc

FIRE FIGHTING COURSE

Class D Combustible metals: magnesium, titanium, zirconium,
aluminium powder, lithium, pothasium for which
special consideration has to be given to the method of
application, appliance and extinguisher media.

FIRE FIGHTING COURSE

Class E Electrical Fire: normally is produced by the heat
generated by a short circuit or an electrical
socket overcharged.

FIRE FIGHTING COURSE

1.5 FIRES INVOLVING ELECTRICAL RISKS

One's personal safety is of paramount importance. Electric shock must
be avoided.

The electric supply must be disconnected, then the fire can be treated
and extinguished according to its classification. In most cases it will be
a class A fire.

If the electric supply cannot be disconnected, a non conductive
extinguishing agent such as CO2, vaporising liquids or dry powder
must be used.

Never use water or foam on electric fire !!!

FIRE FIGHTING COURSE


To extinguish a fire we need to remove just ONE of the elements. We
must remove each element of the fire triangle by different means

Heat Removed by cooling.

Oxygen Removed by smothering.

Fuel Removed by starving.

FIRE FIGHTING COURSE
FIRE EXTINCTION

Fire will cease to exist when the heat is removed (cooling)
FIRE FIGHTING COURSE
COOLING


Cooling absorbs sufficient heat in the fire (as the water turns to steam)
so as to reduce the temperature below the fire point.


There is not enough heat left to maintain combustion.


Water is the most effective way to cool a fire


FIRE FIGHTING COURSE

Fire will cease to exist when the oxygen is removed (smothering)
FIRE FIGHTING COURSE
SMOTHERING

At least 21% oxygen in the atmosphere is required to maintain
combustion. This supply can be blocked off by smothering so as
to extinguish the fire.

Methods used to cut off the oxygen supply
Blanketing the fire with dry powder.
Use of a fire blanket to cover the fire (e.g. a chip pan fire).
Application of foam on a liquid fire (which spreads over the
surface of the burning liquid and gradually cuts off the oxygen
supply).
Displacing the oxygen
FIRE FIGHTING COURSE

Fire will cease to exist when the fuel is removed (starvation)
FIRE FIGHTING COURSE
STARVING

This method is to extinguish the fire through starvation by removal of
the fuel.

Examples
Removal of surrounding combustible materials.
Turning off a gas supply.
Blanking of a pipeline.
FIRE FIGHTING COURSE
FIRE FIGHTING COURSE
Thanks for your
attention today!
Fire Brigade
Course
Crew 871 Egypt

Part 2


FIRE EXTINCTION
FIRE FIGHTING COURSE
FIRE FIGHTING COURSE




Classes Substance Extinguishing
methods
Water Foam CO2 Dry
Powder
A
Solid
materials
Cooling;
smothering
X X X
B
Flammable
liquids
Smothering X X X
C
Flammable
gases
Starving X X
Electrical
hazards
Cut off electric
supply
X X
Vehicles Smothering X X
FIRE FIGHTING COURSE
TYPES OF FIRE EXTINGUISHERS
FIRE FIGHTING COURSE
DRY POWDER FIRE EXTINGUISHER
FIRE FIGHTING COURSE
Control valve
Discharge
tube
Nozzle
Operating
lever
Carrying
handle
CO2 gas
cartridge
Powder
CARBON DIOXYDE FIRE EXTINGUISHER
FIRE FIGHTING COURSE
Control valve
Discharge
tube
Liquid
CO2
Operating
lever
Carrying
handle
Gaseous CO2
Nozzle

Part 4


FIRE PREVENTION
FIRE FIGHTING COURSE
4.1 THE CONTROL OF FUELS


The fuel side of the fire triangle can result from uncontrolled usage or
storage of combustible materials.


Combustible fuels (solid, liquid or gas) must be controlled in usage
and storage in order to reduce or eliminate the risk of fire occurring.

FIRE FIGHTING COURSE
4.1.1 SOLIDS

Uncontrolled usage and storage of large quantities of paper, furnishings,
fittings may result in the initial ignition of a fire or supply sufficient fuel for
the development of a serious fire following ignition.

All managers and supervisors should ensure that:
Paper and files should be stored in presses (ideally non combustible metal
cupboards) away from sources of ignition.
Unwanted stocks of paper, boxes or any unwanted fittings / furnishings are
be removed and disposed.
Paper does not accumulate on floors or in rooms with electronic
equipment, computers, battery charging equipment, etc
No unapproved storage area is used to store solid combustibles.
Regular cleaning of all areas under supervision is carried out and that
rubbish removed is disposed of safely.
FIRE FIGHTING COURSE
4.1.2 LIQUIDS

The ability of flammable liquids, such as petrol, to ignite at ambient
temperatures requires strict control regarding storage and use.

All managers and supervisors should ensure that:
Petrol or its by-products are only transported in approved metal
containers.
Petrol or its by-products are only stored in approved metal containers
at a safe distance from any camp set up.
Cleaning sprays or liquids labelled as 'highly flammable' are kept
to the minimum quantity necessary, and stored in metal presses or
approved cupboards out of direct sunlight.
Cooking oils are only used in approved areas (kitchens) and
heated up only by competent persons under supervision.
FIRE FIGHTING COURSE
4.1.3 GASES


Fire or explosions involving the storage or use may result from the
ignition of leaking gas or following the heating of cylinders under fire
conditions.


All managers and supervisors should ensure that:

Cylinders are not stored in buildings or vehicles overnight.
Cylinders are securely stored in approved cages or compounds
when not in use.
FIRE FIGHTING COURSE
Cylinders containing oxygen or air are stored separately from
combustible gases such as propane or butane.
Damaged or defective cylinders are returned to the supplier.


Staff using LPG or other combustible gases should ensure that:

Hoses and connections are in sound condition.
Only approved connections are used in conjunction with cylinders.
Cylinders are kept upright at all times during transportation,
storage and use.
Cylinders are stored in approved locations only.
FIRE FIGHTING COURSE
4.2 THE CONTROL OF SOURCES OF IGNITION

The heat or ignition side of the fire triangle can result from a number
of sources which are readily available in the workplace or home.
Frequent causes of fire :

Electrical apparatus or wiring.
Smoking.
Gas and LPG equipment.
Cutting and welding equipment.
Rubbish burning.
FIRE FIGHTING COURSE
4.2.1 ELECTRICAL EQUIPMENT AND WIRING


Electrical equipment may cause a fire :

Arcing due to overload, earth faults or loose connections.
Overheating due to overload capacity.
Accidental ignition from apparatus designed to run hot in normal
use (heaters, cookers, soldering irons, etc.).
Accidental overheating of apparatus not designed to run hot in
normal use.
FIRE FIGHTING COURSE

Prevention and Control

All electrical maintenance and repair should be carried out by
qualified staff.
Equipment and apparatus should be protected by correctly rated
fuses and earthed in accordance with relevant standards.
All apparatus and equipment should be unplugged at the end of
the working day.
Cookers and cooking equipment should be constantly supervised
when in use and switched off when not in use.
FIRE FIGHTING COURSE

Never overload sockets by the over use of adapters.

Electrical switching, battery charging and generator locations should
be kept free of material at all times and never used for the storage of
combustible items.

Soldering irons should only be used by competent staff and never
left unsupervised when connected to a power source. Approved
stands should always be provided for soldering irons.


FIRE FIGHTING COURSE

Do Check for signs of damage to cables and leads.
Do Report and defective equipment immediately.
Do Switch off unnecessary equipment at the end of the day.

Dont Overload circuits.
Dont Cover or place articles over heating appliances.
Dont Leave heat emitting apparatus such as cookers or
soldering irons unattended.
Dont Tamper with electrical apparatus.
Dont Attach any combustible materials to light fittings.

FIRE FIGHTING COURSE

Dont Overload circuits.

Dont Cover or place articles over heating appliances.

Dont Leave heat emitting apparatus such as cookers or
soldering irons unattended.

Dont Tamper with electrical apparatus.

Dont Attach any combustible materials to light fittings.

FIRE FIGHTING COURSE
4.2.2 SMOKING

Only strict prohibition of smoking in key areas can prevent the risk of
ignition of combustible items from discarded cigarettes or matches.

Smoking should be prohibited in the following areas:
Storage areas.
Mechanics' workshop areas.
LPG storage areas.
Flammable liquid stores.
Petrol or diesel bowsers.
Offices and computer rooms.
FIRE FIGHTING COURSE

Do Provide a sufficient number of ash trays in
designated smoking areas.
Do Check that smoking materials are correctly
extinguished.
Do Erect 'no smoking' signs in all non-smoking areas.
Do Enforce the no-smoking rule.


Dont Discard smoking materials irresponsibly.
Dont Smoke in prohibited areas.
Dont Disregard breaches of the no-smoking rule.
FIRE FIGHTING COURSE
4.2.3 GAS AND L.P.G. EQUIPMENT

All LPG cylinders should be stored in the approved cage or
compound at the end of the working day.

Hoses and connections should be checked for signs of leaks.

The connection of valves, regulators or hoses to cylinders should
only be carried out in the open air.
FIRE FIGHTING COURSE

Do Exercise caution when handling LPG cylinders.
Do Check hoses for signs of leaks.
Do Keep cylinders away from sources of heat.
Do Keep cylinders under shade in direct sunlight.


Dont Store cylinders indoors overnight.
Dont Use portable LPG appliances for heating purposes.
FIRE FIGHTING COURSE
4.2.4 CUTTING AND WELDING EQUIPMENT

Extremely high temperatures are produced locally in operations
involving oxy-propane, oxy-acetylene or arc welding.

Flame, sparks, molten metals or heat transmitted through materials
being welded or cut, can ignite combustible items.

Lack of knowledge of the working environment by outside
contractors increases the risk.

Ideally, cutting and welding operations should be subject to a permit
to work system supervised by the department head.

FIRE FIGHTING COURSE
Do Ensure that all cutting and welding equipment is in safe
operating condition.
Do Ensure that only trained authorised persons carry out
welding and cutting operations.
Do Remove all combustibles from the work area and cover
fixed combustible items with a fire blanket.
Do Store oxygen, propane and acetylene cylinders securely in
separate compounds outside and in an upright position
with all valves turned off.
Dont Allow contractors to use welding and cutting equipment
unsupervised.
Dont Store welding gases overnight indoors.
Dont Allow untrained staff to use welding or cutting equipment.
FIRE FIGHTING COURSE
4.2.5 RUBBISH BURNING

Rubbish should only be incinerated at a designated site which is in a
safe location and operated by competent persons.


Do Ensure that rubbish is collected daily in rubbish
bins.

Dont Burn rubbish anywhere except in the approved
incineration area.

FIRE FIGHTING COURSE

Part 5


FIRE ACTION
FIRE FIGHTING COURSE
If fire occurs Set on the fire alarm.
Shout Fire ! Fire ! Fire !.
Attack the fire if possible.

If in danger Don't take risk.
Evacuate to the fire assembly
point.

When the fire alarm sounds Leave your location.
Report to the assembly point.
Don't stop for personal belongings.
Do not return until the all clear is
given.
FIRE FIGHTING COURSE
FIRE FIGHTING COURSE
SMOKE TRAVEL
FIRE FIGHTING COURSE
SMOKE TRAVEL

Part 6


PRACTICAL DEMONSTRATION AND PRACTISE

- Extinguisher Selection and Use.

- Classes A, B and Chip Pan Fires.
FIRE FIGHTING COURSE

Potrebbero piacerti anche