Sei sulla pagina 1di 24

7.

Level 2 Repair
7-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Remove the 2 screws.
Check know where is Locking before removing the Locking.
In addition, prepare the Locking Remove Tool.
Remove along the indicated lines the Locking as
shown in the above figure.
Remove the QRE01.
disassembly
1
2
3 4
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-2
Please lifted the QAN01 using the Lock Remove Tool
as shown in the above figure.
Remove the QAN01.
Remove the 3 screws and 1 Connector. Remove the QRE15.
5 6
7
8
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-3
Remove the 8 screws. Check know where is Locking before removing the Locking
Remove along the indicated lines the Locking as
shown in the above figure.
Remove the QFR02.
9 10
11
12
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-4
Take care not to lose the QRF01, QCK02, QVK01,
QMI01, QBC01.
Remove the QBR01 and then removing the 2 Connector.
Remove the QCA01.
Check electric shock point before removing the QCA07.
- If you do not have a discharger, be careful for
electric shock when removing it.
- If you have a discharger, It must be processed for
discharge to the main condenser as shown in the above
picture.
13 14
15 16
ASSY-BARREL
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-5
Remove the 1 screw and 1 Connector. Remove the QCA07.
Remove the 2 Connector and QCB01(CBF COAXIAL
CABLE).
Take care not to damage the FPCB when removing TSP
FPCB from the Connector.
Remove the QMP01.
17 18
19
20
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-6
Remove the 2 screws.
Remove the QMI02, QSP01.
Take care not to lose the QMI02
Remove the 2 screws and 1 Connector, QCB01
(CBF COAXIAL CABLE).
Remove the QME02, QRF03.
Take care not to lose the QRF03.
21 22
23
23
ASSY-SUB-RF PCB
ASSY-SPK
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-7
Remove the 2 QCB01. Pluck the using the tweezers the QBL05(PIN BATTERY COVER)
Remove the QBL05, QBL07, QBL01.
Take care not to lose the QBL07, QBL05
Remove the using the Locking Remove Tool the 2 Locking.
24 25
26
27
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-8
Remove the QBL04 and then removing QBL06,
QMO01. Take care not to lose the QBL06.
The QFM01, QCA02, QME04 are remove in order of numbers
on the QFR01.
29 30
ASSY-CAMERA
VT CAM
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-9
The QME04, QCA02, QFM01 are assemble in order of
numbers unto the QFR01.
Assemble the QBL06, QMO01 and then assemble QBL04.
Check the assembled of 2 LOCKING. Assemble the QBL05, QBL07, QBL01.
1 2
3
4
Assembly
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-10
Insert the QCB01 in the groove.
Assemble the QRF03 on the QME02 and then assemble the
QME02. When assembling, assemble so that the both
endsside teminal of CBF COAXIAL CABLE can come out to the
qutside of the QME02.
Tightening the 2 screws and assemble the 1
Connector, QCB01 (CBF COAXIAL CABLE).
Assemble the QMI02 on the QSP01 and then assemble the
QSP01. When assembling, assemble so that the one
terminals of CBF COAXIAL CABLE in remaining can come out
to the outside of the QSP01.
5 6
7
8
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-11
Tightening the 2 screws.
Assemble the QMP01. When assembling, assemble so that the
one terminals of CBF COAXIAL CABLE in remaining can come
out to the outside of the QMP01.
Assemble the 2 Connector and QCB01(CBF COAXIAL
CABLE). Take care not to damage the FPCB when
Assembling TSP FPCB from the Connecotor
Assemble the QCA07.
9 10
11
12
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-12
Tightening the 1 screw and assemble 1 Connector. Assemble the QCA01.
Assemble the 2 Connector and then attach the QBR01.
-When place the barrel be carful of FPCB crack
around the Barrel.
Assemble the QFR02, QRF01, QCK02, QVK01, QMI01, QBC01.
-Please check whether the components of the above picture
are altogether assembled.
13 14
15
16
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-13
Assemble the QFR02.
Please along the indicated lines the Locking and assemble
as shown in the above figure.
Tightening the 8 screws. Assemble the QRE15.
17 18
19
20
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-14
Tightening the 3 screws and then assemble 1
Connector.
Assemble the QAN01.
Assemble the QRE01.
Press along the indicated lines the Locking and assemble
as shown in the above figure.
21 22
23
24
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-15
Tightening the 2 screws.
25
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-16
Camera Adjustment
Adjustment List
Must do CAMERA adjustment, when Main PCB or Barrel ASSY is exchanged.
Section Sub Section
Repair Part
ETC
Main PCB Lens Barrel
Adjustment #1
Color Shading
Defect Pixel Correction
a sheet of white paper
Adjustment #2
(optinal)
Color Shading
Only if a fifth picture has a purple
color or black shadow on 4
corner,
Equipment List
Program Installation
- 1. Adjustment Program Installation
1) Unzip GC_Adj_v3.2.2 SCV.zip file provided
2) Open GC_Adj_v3.2.2 SVC folder
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-17
3) Install vcredist_x86.exe file
(Needed ONLY ONCE at the first time)
Adjustment
- 1. Set up for adjustment
1.1 How to connect it
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-18
1.2 Setup for Adjustment
1) Check COM Port number of USB Serial Port. (Control Panel Equipment Operator)
2) Execute shortcut file GCMot3.2.2_SCV in adjustment_z4_zoom
3) Connect COM Port by click SET UP button
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-19
4) Re-run after closing program
If you changed USB cable port, you Should setup again.
5) Copy "c101_shading_data.bin" to SD card and insert it to the product.
6) Power off the product.
7) Connect the product to Anyway Jig with power off.
Do not connect the product power on to Anyway Jig.
Connecting the product to Anyway Jig make it turn on .
8) The product turn itself on.
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-20
This is set-up recommendation of Shading Adjustment. If you don't have any tripod, you can hold the
product by hand in front of a sheet of white paper
1.3 Shading Adjustment
1) Click the FILE button to open Script file.
2) Select M_WriteDefaultTable.txt
( PATH : adjustment_s4_zoom > adj_script >M_WriteDefaultTable.txt )
3) Put a sheet of white paper in front of camera.
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-21
4) Click the START button to start adjustment.
5) Result of adjustment is displayed once.
(This process takes about 4 mins.)
6) Pull out SD memory card and check the picture data in.
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-22
( PATH : DCIM > Camera > SAM_xxxx.jpg)
7) Open the last picture among 5 pictures.(First picture would be #1 and the last picture would
be #5.)
8) Check 4 corner on which there is purple color or black shadow. If there is like NG image
below, go to "11)" or isn't, go to "9)
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-23
9) If the purple color or black shadow is not so serious like OK images below, please close
factory mode by key strings.
10) Trun on telephone app and insert *#87976633#, then restart the product. This is for changing
mode from factroy to user.
11) If there is purple color or black shadow on one of 4 corner in the lase image, please check
the other pictures and select best image. (Please refer OK image above.)
12) Re-adjust the product with the best image data.
13) Click the FILE button to open Script file.
Level 2 Repair
Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-24
14) Select the script file of best image.
(The best image number is related with script name.)
=> If second picture is best, then select s_final_2.txt
15) Click the STARTbutton to start adjustment
16) Result of adjustment is displayed once.
17) Restart the product.

Potrebbero piacerti anche