Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
7
F OR H E L I A X
P R OD U C T S
Installation Accessories
Now includes Waveguide Accessories
Cost-Effective, Value-Added Products
for Superior Performance
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page A
A
B
E
A
E
F
G
C
Cable Installation Accessories
Cable Hoisting and Attachment:
Hoisting Grips, Support/Hoisting Grips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
SnapStak Hangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Click-On Hangers, Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
KwikClamp Hangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Standard Hangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Hanger Attachment Adapters and Mounting Hardware . . . . . . . . . . . . . . . . . . . . 9
Cable Ties, Nylon or Velcro
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Hanger Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Weatherproofing:
3M Cold Shrink Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Weatherproofing Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Standard Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Cable Entry:
Arrestor Port II Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Standard Cable Entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Elliptical Waveguide Cable Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Installation Aids:
EASIAX
Prep Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Tool Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Installation Aids Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Lightning Protection
Grounding Kits:
Compact SureGround. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
SureGround. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Standard Grounding Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Grounding Bars:
Universal Ground Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
High Capacity Grounding Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Universal Arrestor Ground Bar Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Arrestor Plus
Surge Arrestors:
T-Series Arrestors, Integrated Arrestors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Gas Tube Surge Arrestors, Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Broadband Surge Arrestors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Services
Planning Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Customer Support Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
OnePack
SM
Site Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Andrew Institute
Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Appendixes
Appendix 1 Quarterwave Stub Surge Arrestors - Considerations and Selection . . 29
Appendix 2 Gas Discharge Tube Protectors - Considerations and Selection. . . . . 31
Appendix 3 DC Passing Wide Band Arrestors . . . . . . . . . . . . . . . . . . . . . . . . 34
Appendix 4 Lightning Strike Statistics and Definitions . . . . . . . . . . . . . . . . . . . . 35
Appendix 5 Documents Available for Additional Information. . . . . . . . . . . . . . . 36
Appendix 6 Cable Hanger Spacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Appendix 7 Part Number Cross Reference MTS to Andrew . . . . . . . . . . . . . . . 45
Table of Contents
A Cable Hoisting and Attachment
B Weatherproofing
C Cable Entry
D Installation Aids
E Grounding Kits
F Grounding Bars
G Arrestor Plus
Surge Arrestors
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page B
AASP the first and only PCS/Cellular Systems Design Software
Andrew is your value-added source for cable installation
accessories and lightning protection. Over sixty years of
industry leadership around the globe allows us to provide
you with a comprehensive selection of cable installation
accessories and lightning protection products. When you
buy Andrew, you buy confidence.
With Andrew in your system build-out, you build in:
Faster installation
Increased versatility
Added safety and reliability
Greater cost effectiveness
Comprehensive customer service
Andrew product performance is the industry standard.
When you need superior performance from your system,
put Andrew cable installation accessories and lightning
protection to work for you.
Andrew quality protects your investment. Reliable Andrew
cable installation accessories and lightning protection help
keep your system operational, lowering repair and
replacement costs.
Andrew service means superior delivery performance.
Our system of global manufacturing facilities and product
warehouses ensures your cable installation accessories
and lightning protection products are where you want them,
when you want them. Our customer service can respond
to your requests on the telephone, or over the Internet.
When planning your next system, specify Andrew. We can
supply your system needs with greater cost effectiveness,
faster installation, superior performance, simplified ordering,
increased versatility, and added safety and reliability.
Andrewfor the best value in cable installation accessories
and lightning protection.
AASP is available on the Andrew Powertools
TM
CD-Rom or as a download from www.andrew.com
Do It Right the First Time with Andrew Accessories
Design your PCS or cellular system in less time, with
greater accuracy, and lower costs with advanced
Andrew Antenna Systems Planner software (AASP).
Powerful AASP software graphically guides you
through the entire design process, from the choice
of frequency to the available shipping options.
The programs dynamic, rule-based logic generates
custom solutions by using standard Andrew products while
automatically checking component compatibility. Upon completion,
AASP provides you with a customized bill of materials of the Andrew
parts necessary for the system.
O
nly fro
m
A
nd
rew
!
1
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 1
How to Choose Your Accessories
The Andrew Installation Accessories
Selection Guide
Once youve selected the cable and connectors for your system, the
cable mounting and protection system must be planned. Andrew offers
a comprehensive line of installation accessories and lightning protection
systems to help you realize your communications systems full potential.
The Andrew Installation Accessories Helpful Assistant
gives you insights and tips on accessories and lightning
protection. These tips can help you select the best
equipment to meet your specific needs.
Hoisting Grips
Select a hoisting grip to safely raise the cable
and hold it during hanger attachment. In some
cases, a hoisting grip must also be used with
a calibrated clamp, available from Andrew,
to provide permanent support for the cable.
Hangers
The type or shape of the structure, the space
available for cable attachment, the type of
environment the system will be exposed to,
and the ease of installation or maintenance are
key considerations. Many hanger options are
available, and many variables have tradeoffs that
affect total hanger system cost. The table on page
11 will help you select the best hangers for your
system and budget.
Weatherproofing
Weatherproofing keeps connector interfaces
tight and adds an additional layer of protection
against the environment. Andrew offers three types
of weatherproofing. A standard weather-proofing
kit provides universal coverage and uses butyl and
vinyl tapes to wrap connector surfaces. Our 3M
Cold Shrink Weatherproofing Kit uses a self-
shrinking technology to reduce installation time.
New weatherproofing enclosures seal and protect
connectors for the environment in seconds.
Grounding Kits
A grounding kit diverts transient currents from
lightning off the transmission line to an earth
grounding system to prevent damage to cable
and radio equipment. A typical installation uses
three grounding kits: near the top of the main
feeder cable, at the bottom of the main feeder
prior to the horizontal run, and just prior to the
cable entering the building. Andrew offers three
kit types to meet the requirements of your system
and budget.
Surge Arrestors
Andrew Arrestor Plus
cable.
The distinctive, self-contained design of the SnapStak stackable snap-in
hanger eliminates the need for mounting hardware and installation tools.
This simplifies coaxial cable installations, lowering both time and cost.
Retention tabs on the spring fork make
SnapStak hangers highly resistant to
pop-out, so installations are robust and
secure. Yet, specially designed to
dampen vibrations, SnapStak hangers
do not have a rigid hold on the tower,
so motion caused by wind is simply
absorbed. This reduces movement
down the coaxial cable, greatly
reducing stress on the connections at
the jumper cable, antenna, or device.
SnapStak hangers can be mounted directly to the
tower support system, or used in conjunction with a variety of mounting
accessories for rooftops, buildings and water towers. The SnapStak
hanger installs in 3/4" holes in support structures 1/8" (0.120" to
0.150") thick. The stainless steel construction of the SnapStak snap-in
hanger provides exceptional integrity, even in highly corrosive
environments and extreme weather conditions. Compact installations save
tower space. And maintenance is easy, since SnapStak stackable snap-in
hangers are self sufficient no hardware required for installation!
Mounts to pre-punched 3/4" (19 mm) holes. Kit of 10.
Use the support/hoisting grip whenever
possible. Rely on the standard, lace up hoisting
grip only when connectors are pre-attached or
you have to place a grip in the middle of a
cable run over 200 ft.
Cable Hoisting and Attachment
F1SGRIP F1SGRIP-IK 1/4" FSJ1
L1SGRIP L1SGRIP-1IK 1/4" LDF1
E2SGRIP E2SGRIP-2IK 3/8" EFX2
L2SGRIP L2SGRIP-2IK 3/8" LDF2
F2SGRIP F2SGRIP-2IK 3/8" FSJ2
C2SGRIP C2SGRIP-2IK 3/8" CNT-400
L4SGRIP L4SGRIP-4IK 1/2" LDF4
F4SGRIP F4SGRIP-4IK 1/2" FSJ4
L45SGRIP L45SGRIP-45IK 5/8" LDF4.5
L5SGRIP L5SGRIP-5IK 7/8" LDF5, VXL5
L6SGRIP L6SGRIP-6IK 1-1/4" LDF6, VXL6
L7SGRIP L7SGRIP-7IK 1-5/8" LDF7, VXL7
L12SGRIP L12SGRIP-12IK 2-1/4" LDF12
Standard Hoisting Grip
For Transmission Line Installation
Use at 200 ft (60 m) intervals to raise cable on
tower. Use with additional support clamp to
achieve optimum cable grip.
cable installation accessories
ORDERING INFORMATION
Part Number Description
SG-IT Support Clamp Installation Tool
ORDERING INFORMATION
Part Number Part Number
Hoisting Grip Support Clamp Cable Size
43094 L4SGRIP-4IK 1/2"
29958 L45SGRIP-45IK 5/8"
19256B L5SGRIP-5IK 7/8"
29961 L6SGRIP-6IK 1-1/4"
24312A L7SGRIP-7IK 1-5/8"
31535 L12SGRIP-12IK 2-1/4"
26985A NA 3"
34759 NA 4"
31031-1 NA 5"
ORDERING INFORMATION
Part Number Description - Kits of 10
SSH-12 SnapStak hanger kit for 1/2" corrugated cable
SSH-78 SnapStak hanger kit for 7/8" corrugated cable
SSH-114 SnapStak hanger kit for 1-1/4" corrugated cable
SSH-158 SnapStak hanger kit for 1-5/8" corrugated cable
US patents: 6,345,543 6,899,305 and 6,161,804 other patents pending
Support/Hoisting Grip
Safer, Faster Cable Hoisting
Lift and support cable in your monopole or on your tower
faster and more safely and without the threat of slippage.
Our one-piece grip and locking clamp speed and simplify
installation by eliminating time consuming lacing.
Use at 200 ft (60 m) intervals to raise cable and
provide permanent cable support. Basic kit includes
one grip and one support clamp. Support clamps are
also available in kits of10. Installation tool is required.
ORDERING INFORMATION
Part Number Part Number HELIAX
Cable
Support Grip Support Clamp Size Type
3
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 3
SnapStak Hanger Tool
Specially designed pliers make installation and
removal of SnapStak snap-in hangers extremely
easy. The spring loaded pliers are designed
with a hook that holds and spreads the hanger
open to slip easily over the cable. Serrated
pads then squeeze the hanger together for
effortless insertion into the mounting structure.
Insulated handle and a lanyard hole make it
easy to hang on to.
Snap-In Tower Standoffs
For mounting snap-in hangers to round
support members. Adapter is designed
with 3/4" pre-punched hole. Adapter
provides 2-1/2" (60 mm) standoff. All
parts are stainless steel or galvanized.
Kit of 10.
NEW! Universal Snap-In Adapter
The Universal Snap-In Adapter is a versatile device for securing coaxial
cable hangers to structures such as communications towers, rooftops,
buildings and water towers.
The Universal Snap-In Angle Adapter secures coaxial cable to any
round or angle tower members where pre-punched holes are not easily
accessible. The adapter has a pre-punched 3/4" hole that allows the
installer to mount cable hangers such as Andrew SnapStak snap-in
hangers to wireless communications towers or other structures. Made
of stainless steel for long life.
Cable Hoisting and Attachment
cable installation accessories
ORDERING INFORMATION
Part Number Member Diameter, in (mm)
STS-12 1 2 (25 50)
STS-23 2 3 (50 75)
STS-34 3 4 (75 100)
STS-45 4 5 (100 125)
Snap-In Hangers
Attachment with No Hardware!
Andrew Snap-In Hangers provide quick
and easy attachment in all types of
weather. The hangers snap directly
into holes in the tower support members.
Installation time and costs are substantially
reduced. These hangers feature cable gripping
tabs to prevent cable slippage, and are constructed
of heavy gauge stainless steel for high strength and
excellent corrosion resistance. Waveguide versions
include a heavy UV resistant rubber insert to secure
the elliptical cable.
ORDERING INFORMATION
Part Number Description
206706A-6 For 5/8" cables
206706A-5 For 2-1/4" cables
Cable
ladder
rung
Round
member
adapter
Angle
Universal Adapter Applications
ORDERING INFORMATION
Part Number Description
UA-3 Universal Snap-in Adapter, kit of 10
ORDERING INFORMATION
Part Number Description
UAAI Universal Angle Adapter Insert, kit of 10
Universal Angle Adapter Insert
Insert transitions the Universal Adapters 3/4" to
a 3/8" hole diameter, which allows the use of
standard hangers.
Shown with Snap-In Adapter,
each purchased separately
ORDERING INFORMATION
Part Number Description
SHT-4 SnapStak Hanger Tool, quantity 1
Waveguide Type Part Number
EW52 EWSH-52
EW63 EWSH-63
EW64 EWSH-64
EW77 EWSH-77
EW90 EWSH-90
EW127A EWSH-127A
EW132 EWSH-132
EW180 EWSH-180
EW220 EWSH-220
EW249 EWSH-240
4
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 4
NEW! Anchor Rail Adapter*
Anchor Rail Adapters make cable installation
fast, secure, and neat.
These one-piece, one-size, self-contained
Anchor Rail Adapters require no tools and
snap into common strut or anchor rail
systems, such as UniStrut
Metal
Framing. The 3/4" hole accepts
common snap-in hangers. Adapters
can be used for horizontal or vertical
cable to produce neatly aligned
installations on large poles, smokestacks,
rooftops, walls, or any support structure.
*Patent Pending UniStrut is a registered trademark of the UniStrut Corporation
Snap-In Adapter Bracket
This bracket is used in conjunction
with WRAPLOCK
and is used on
large, round members, water towers,
or outside of a monopole. The
brackets slide on the WRAPLOCK
and hold up to six runs of coaxial cable. You can use multiple brackets for
the number of runs required for your system. The galvanized steel bracket
supports both standard hangers and snap-in hangers. Accommodates six
runs of snap-in hangers and four runs of click-on hangers.
Universal Snap-In Bracket
These galvanized steel brackets are designed to
work on both angle and round members. They are
pre-punched with 3/4" holes to hold snap-in hangers
or standard hangers.
PVC Roof Sleeper
Support rooftop coaxial cable runs using the snap-in PVC
Roof Sleepers. PVC Roof Sleepers are pre-punched
with 3/4" holes to accommodate snap-in
hangers. Sleepers are made of a gray
4" (102 mm) x 4" (102 mm), UV-resistant
PVC material.
Snap-In Adapter Block
This Snap-In Adapter Block is designed to
accommodate a snap-in hanger on each side
of the block. You can attach this to the tower with
our standard angle adapters or tower standoffs.
Mechanically galvanized hardware.
ORDERING INFORMATION
Part Number Description
ARA-18 Anchor Rail Adapter for 0.71" (18 mm) rails
(European standard), kit of 10
ARA-22 Anchor Rail Adapter for 0.86" (22 mm) rails
(North American standard), kit of 10
ORDERING INFORMATION
Part Number Description
RM-USBG Snap-In Adapter Bracket
12395-1 Stainless Steel WRAPLOCK
ORDERING INFORMATION
Part Number Description
SHA3 Snap-in Adapter Block, kit of 10
ORDERING INFORMATION
Part Number Description
SS-TB2550 Universal Snap-In Bracket, for 1-1/2" to 5- 9/16"
round member 2-1/2" to 5" angle member.
Accommodates six snap-in or standard hangers.
SS-TB6080 Universal Snap-In Bracket, for 6" to 10-3/4"
round member 6" to 8" angle member
accommodates six snap-in or standard hangers.
ORDERING INFORMATION
Part Number Description
MT-F1598 4 run, 22" (559 mm) length
MT-F1599 8 run, 32" (810 mm) length
MT-F1600 12 run, 43" (1102 mm) length
Cluster Support Bracket
The Cluster Support Bracket is a versatile means
to support multiple runs of coaxial cable in
virtually any application. The oval design allows
coaxial cable to be run inside and outside of the
bracket, which maximizes its capacity. Each
bracket features 3/4" holes to accommodate
snap-in hangers and 3/8" holes for butterfly
hangers using standard 3/8" hardware. The
Cluster Support Bracket supports seven runs of
coaxial cable. Sold in units of one, U-bolt hardware sold separately.
ORDERING INFORMATION
Part Number Description
CS-B Cluster Support Bracket with U-bolt
for 2-3/8" round member attachment
Cable Hoisting and Attachment
5
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 5
Cable Hoisting and Attachment
Click-On Hangers
Click-On Hangers
Install Cable with One Easy Click
Specifically designed to support HELIAX
Cable
Kits are available for transitions
from larger to smaller diameter
cable, such as 1-5/8" to 1/2", or
for same diameter cable, such as
1/2" to 1/2". See the table for part
numbers.
3M and Cold Shrink are trademarks of Minnesota Mining
and Manufacturing Company
Part Number Minutes Application Diameters in (mm)* Kit Coverage Cable Size to Cable Size
Connectors, 7-16 DIN or Type N
245173 0.63 0.41 (1610) 3/8" through 1/2" to 3/8" through 1/2"
241475-13 0.80 0.29 (207.4) 1/4" through 5/8" to 1/4" through 1/2"
241474-7 0.80 0.80 (2020) 5/8" to 5/8"
245171 0.84 0.29 (27.4) 7/8" to 1/4" through 1/2"
245172 1.20 0.29 (307.4) 1-5/8" or 1 1/4" to 1/4" through 1/2"
245175 1.40 0.41 (3610) 2-1/4" to 1/4" through 1/2"
Antennas, filters, amplifiers, 7-16 DIN or Type N**
245174 0.84 0.29 (217.4) 1/2" 7/8" jumpers to antenna
* Minimum application diameter is the fully compressed diameter of each tube in the kit.
**Andrew 3M
TM
Cold Shrink
TM
Weatherproofing is completely compatible with Andrew base station antennas.
Request Bulletin 10138B for complete details and also refer to special publication SP50030 for specific application information on the use of
Cold Shrink
TM
for antenna interfaces.
Weatherproofing for Antennas
Complete your transmission line installation
with Andrew Corporations WeatherShield
Connection Protection Enclosure which
seals and protects connectors from the
environment.
The reusable enclosure contains an
innovative trifold seal that provides
complete moisture block for installed
connectors. The ease of installation on
hard-to-reach connections and the long-
term protection provided by this
enclosure makes it the most cost-
effective solution available today. The
WeatherShield Connection Protection
Enclosure takes just seconds to install.
Simply place the housing around the
connector and snap the tabs together.
AWE-A12 enclosure for
1/2 to antenna/device
ORDERING INFORMATION
Part Number Description
AWE-A12 Enclosure for 1/2 antenna connection/device
12
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 12
13
Standard Weatherproofing Kit
for Connectors and Antennas
The application of sealing
materials to antenna cable
connections protects them
from weather conditions.
These include moisture
penetration and loosening
of connections from
vibrations caused by strong
winds. Andrew Corporation
recommends weatherproofing these connections with standard
weatherproofing tapes such as butyl and plastic electrical tapes.
Main feeder cable-to-jumper cable connection
Jumper cable-to-antenna connection
This kit provides an additional moisture seal for cable connections.
It also prevents loosening of connections from vibration or other external
stresses, which would eventually allow moisture penetration. The sealed
connection is suitable for typical exposed and buried cable applications.
ArrestorPort II
Integrated Transmission Line
Entry/Ground System
The ArrestorPort II integrated building
entry/ground system redefines the way you
achieve cable shelter entry and grounding. Traditional installations rely on
a piecemeal approach that steals time and increases costs. ArrestorPort II
unifies the installation of entry ports, Arrestor Plus
precision cutting tool is the only cutting tool made exclusively for
HELIAX
coaxial cable.
EASIAX Cutting Tool Ordering Information
ORDERING INFORMATION
For HELIAX
Cable Types Cutting Tool Part No. Features Replacement Blades Kit of 5,Part Number
FSJ1, FSJ4, ETS1, RXL1* Series MCPT-1412 Cuts jacketing and outer conductor 209874
FSJ2, FSJ4,ETS2 Series MCPT-3812 Cuts jacketing and outer conductor 209874
LDF4, HL4RP-50, RXL4** Series MCPT-L4 Cuts outer conductor and scores jacketing MCPT-BK4
LDF5, VXL5, AVA5, RXL5 Series MCPT-78 Cuts outer conductor and inner conductor and scores jacketing MCPT-BK5
* Except RXL1-1RNT
** Except RXL4-(1, 2 or 3) RNT
Except FSJ1RN
Except FSJ4RN
Installation Aids
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 17
Installation Aids
cable installation accessories
Crimping Tool
Used to attach crimp-on lugs for standard
and SureGround series. Not required
for kits having factory-attached lugs.
Connector Attachment Torque Wrenches
Preset to Andrew Specifications
Andrew Torque Wrenches attach any type of HELIAX
cable
size. Under each cable size you will find
a list of part numbers for the appropriate
cable prep tools, cable conditioning tools,
spanner and torque wrenches, and
grounding kit prep tools.
Youll have the option of selecting a
manual or automated cable prep tool.
Under the individual tools you will find
the torque wrenches for the connector
interface nuts.
Manual Cable Prep Tool for 3/8" FSJ1-50 cable
Cut-off Tool 7/32"
Cut-off Tool 8/32"
Cut-off Tool 9/32"
Manual Cable Prep Tool for 3/8" FSJ2-50 cable
Cut-off Tool 7/32"
Cut-off Tool 8/32"
Cut-off Tool 9/32"
Automated/Manual Cable Prep Tool for 1/2" coaxial SuperFlexcable
Manual Cable Prep Tool for 1/2" SuperFlex FSJ4-50B cable
Chamfer Tool
Cut-off Tool 7/32"
Cut-off Tool 8/32"
Cut-off Tool 9/32"
Automated/Manual Cable Prep Tool for 1/2" coaxial cable
21 mm Torque Wrench for L4- OnePiece connectors
3/4" Torque Wrench for L4- RingFlare connectors
Manual Cable Prep Tool for 1/2" LDF4-50A cable
Plastic Grounding Kit Stripping Tool for LDF4 cable
Replacement Blade Kit for Grounding Kit Stripping Tool for LDF4 cable
Manual Cable Prep Tool for 7/8" VXL5 or LDF5 cable
Automated Cable Prep Tool for 7/8 cable
1-1/4" Torque Wrench for 7/8" connectors
1-3/8" Open End Wrench for OnePiece 7/8" connectors.
Fits body of PositiveStop connectors
1-1/4" Open End Wrench for 7/8" connectors.
Fits clamping nut of Positive Stop connectors.
Foam and Separating Tools for LDF5-50B and VXL5-50 cable
Foam and Separating Tools LDF5-50A and VXL5-50 cable
Aluminum Grounding Kit Stripping Tool for 7/8" cable
Replacement Blade Kit for Plastic Grounding Kit Stripping Tool for 7/8" cable
Manual Cable Prep Tool for 1-1/4" VXL6 or LDF6 cable
Replacement Blade for CPTV2-114
Automated Cable Prep Tool for 1-1/4" LDF6 cable
1-7/8" Torque Wrench 1-1/4" standard or RingFlare
TM
connectors
1-3/4" Torque Wrench for 1-1/4" OnePiece connectors
Foam and Separating Tool for LDF6-50 and VXL6-50 cable
Aluminum Grounding Kit Stripping Tool for 1-1/4" cable
Replacement Blade Kit for Grounding Kit Stripping Tool for 1-1/4" cable
1-7/8" Open End Wrench
Manual Cable Prep Tool for 1-5/8" VXL7 or LDF7 cable
Replacement Blade for CPTV2-158
Automated Cable Prep Tool for 1-5/8" cable
2-1/4" Torque Wrench for 1-5/8" connectors
2-1/4" Open End Wrench for 1-5/8" connectors
Foam and Separating Tool for LDF7-50 and VXL7-50 cable
Aluminum Grounding Kit Stripping Tool for 1-5/8" cable
Replacement Blade Kit for Grounding Kit Stripping Tool for 1-5/8" cable
*MCPT-1412 . . . . .
224361 . . . . . . . .
224362 . . . . . . . .
244494 . . . . . . . .
MCPT-3812 . . . . .
224361 . . . . . . . .
224362 . . . . . . . .
244494 . . . . . . . .
CPT-F4 . . . . . . . . .
MCPT-1412 . . . . .
241953 . . . . . . . .
224361 . . . . . . . .
224362 . . . . . . . .
244394 . . . . . . . .
CPT-L4ARC1 . . . . .
247696 . . . . . . . .
245154 . . . . . . . .
MCPT-L4 . . . . . . . .
GKT-L4A . . . . . . . .
GKT-BK512 . . . . . .
*MCPT-78 . . . . . . .
CPT-78U . . . . . . . .
244378 . . . . . . . .
245516 . . . . . . . .
244459-5 . . . . . .
FST-78 . . . . . . . . .
FST-78A . . . . . . . .
GKT-78A . . . . . . . .
GKT-BK512 . . . . . .
CPTV2-114 . . . . . .
CPTV2-BK . . . . . . .
CPTL6 . . . . . . . . .
244375 . . . . . . . .
247698 . . . . . . . .
FST-114 . . . . . . . .
GKT-114A . . . . . . .
GKT-BK67 . . . . . . .
244459-6 . . . . . .
CPTV2-158 . . . . . .
CPTV2-BK . . . . . . .
CPT-158U . . . . . . .
244374 . . . . . . . .
244459-7 . . . . . .
FST-158 . . . . . . . .
GKT-158A . . . . . . .
GKT-BK67 . . . . . . .
1/4" cable
3/8" cable
1/2" cable F4
F4 and L4
1/2" cable L4
7/8" cable
1 1/4" cable
1 5/8" cable
General Purpose TB-COMP-KIT . . . . .Complete Tool Box Kit includes all individual tools marked
with and asterisk in the list below.
Individual Tools 244379 . . . . . . . .
244377 . . . . . . . .
*224352 . . . . . . .
*224354 . . . . . . .
*224355 . . . . . . .
*224356 . . . . . . .
*224360 . . . . . . .
*224363 . . . . . . .
*224368 . . . . . . .
*224373 . . . . . . .
*224380 . . . . . . .
*224395 . . . . . . .
*114468 . . . . . . .
*114469 . . . . . . .
Type N coupling nut torque wrench
7-16 DIN type coupling nut torque wrench
Safety knife
Ruler
Grease brush
Point file
Pin alignment tool
Cable flare tool LDF4
Cable flare tool LDF5
Cable flare tool LDF6
Pin depth gauge N-male
Pin depth gauge N-female
Pin depth gauge DIN-male
Pin depth gauge DIN-female
19
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 19
Grounding Kits
lightning protection
NEW! Compact SureGround Grounding Kits
Now wireless communications system installers and designers can protect
their systems from the effects of lightning easier and at lower cost. The
new Compact SureGround Grounding Kit, available only from Andrew,
is a one-piece grounding assembly with the weatherproofing molded right
into the grounding strap.
Compact SureGround Grounding Kit features:
Easy attachment
Self-locking, self-sealing weatherproof boot eliminates
loose hardware and taping
Saves up to an hour of installation time per typical nine run site
Sure protection
Largest surface contact area in the industry
Provides surety of protection against even the
most severe lightning strikes
Waterproof to IEC529, IP68
Compact size
Snap and lock installation ideal for tight cable
bundles or crowded towers
Exclusive universal grounding lug can be fitted
to a one- or two- hole earthing attachment point.
US patent 6,548,762, others patents pending
More Information
See Compact Sureground
Ordering Information on Page 23
See the installation video on
www.andrew.com/products/trans_line/heliax/sureground.aspx
SureGround Standard Compact
SureGround
Easy Installation
Position Compact SureGround Snap and Lock to Seal
The Compact SureGround fits neatly in tight cable bundles
The Compact SureGround Kit with integrated
weatherproofing is the choice for the speediest
installation, best fit in tight locations, and long
term protection.
20
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 20
21
Grounding Kits
General Features
Heavy Duty Ground Lead
Andrew Grounding Kits use heavy duty 16 mm
2
ground leads
to maximize performance. The IEC 1024-1 compliant copper ground
lead reduces dc resistance. The extremely pliable jacket provides
protection and makes it easy to maneuver the lead into position for
attachment to the down conductor.
Solid copper construction for high current handling capability,
compatibility with copper cable outer conductors.
Meets military standards at commercial prices.
Provides certainty of continued operation.
Tested at an independent laboratory.
Grounding Point
Grounding Point 4
(Runs longer than 200 ft.)
Grounding
Point 2
Grounding
Point 3
Point 1
Universal Grounding Lugs
This grounding lug provides you with the option of a one-hole
configuration or two-hole configuration. Just break
away the bottom portion of the lug and this will
give you your one-hole lug. This Universal Lug
will fit common buss bar configurations with
two-hole spacings of 0.750, 0.815 or 1.0".
Designed to crimp on 16 mm
2
grounding
wire. Included on all grounding kits and
available separately.
for two bolt grounding
for one bolt grounding
Versatile Grounding Lug
Transmission Line Grounding
A well designed system uses grounding kits to provide a bond between
the cable and the tower/earth ground system. One grounding kit is
recommended at tower top, tower bottom, at 200 ft (60 m) intervals (where
applicable), and at the entrance to the equipment shelter. Andrew solid
copper grounding kits have passed United States Air Force lightning
simulation tests and meet MIL-STD-188-124A. The non-braided solid copper
construction of all Andrew grounding kits eliminates corrosion caused by
moisture retention and wicking. A heat shrink tube protects the cable
terminal connection.
Crimping Tool for SureGround
and Standard Grounding
The crimping tool is used to attach crimp-on lugs for standard and
SureGround series grounding kits. Not required for kits with factory
attached lugs.
ORDERING INFORMATION
Part Number Description
245529-10 Universal Grounding Lug, kit of 10
207136-3 Grounding Lug hardware kit
ORDERING INFORMATION
Part Number Description
207270 Crimping Tool, kit of 1
Simply snap off pre-scored lug for one hole option
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 21
Grounding Kits
lightning protection
Standard Grounding Kits
Offer Easy Installation for System Protection
Standard Grounding Kits are traditional solutions
for lightning protection and are also well suited
for elliptical waveguide installations. One
grounding kit is recommended at the tower
top, tower bottom, at 200 ft (60 m) intervals,
and at the entrance to the equipment shelter.
Standard Grounding Kits (204989 and
241088 series) require few steps to install and
include easy-to-follow instructions. Proper tensioning
is ensured by an expansion section that provides visual indication
that the strap is secured.
Series 204989 and 241088 kits include a solid copper strap riveted to
the grounding wire, coiling tool for proper tightening, universal grounding
lug, tower attachment hardware, and a two-part tape weatherproofing
system. Field-attachable, crimp-on grounding lugs require a crimping tool
(not included).
Key Feature Over-molded weatherproof Preformed clip-on strap Wraparound grounding strap Multiple cable size
design for easy, fast installation wraparound grounding strap
Benefits Uniform installation compact Requires no tools Fits standard coaxial cable Breakaway design fits
design for bundled installation for installation and elliptical waveguide multiple sizes of coaxial cable
and elliptical waveguide
Installation Time Less than 1 minute About 3 minutes About 6 minutes About 7 minutes
Construction Preformed copper Pre-tensioned copper Copper ground strap Copper ground strap
ground strap ground clip
Over-molded weatherproof Standard weatherproofing Standard weatherproofing Standard weatherproofing
boot, easy lock tabs
Grounding Kit Selection Guide
Compact SureGround SureGround Standard Universal
Universal Connector Grounding Kit
40 mm x 22 mm x 17 mm
SureGround Kits
Fast Installation,
Complete Protection
Protect your equipment from
the effects of lightning with
SureGround Grounding Kits.
Meeting both MIL and IEC
standards, the SureGround
self-securing ground strap
eliminates the need for
attachment tools and provides
protection against lightning strikes up
to 125 kA. Quality non-braided solid
copper construction prevents moisture retention
and wicking, while a heavy duty 16 mm
2
IEC 1024-1 compliant
copper ground lead maximizes performance. Installation is fast, easy,
and error-free. Grounding kits include a solid copper strap riveted to
the grounding wire, tower attachment hardware, and a two-part tape
weatherproofing system.
US patent 5,850,056
Connector Grounding Kit for Mounting Rail
ORDERING INFORMATION
Part Number Description Quantity
244495 Universal Connector Grounding Kit 1
ORDERING INFORMATION
Part Number Description
CGT12 Connector Ground Kit fits all F4 and L4
(except OnePiece) series connectors
CGT58 Connector Ground Kit fits all L4.5 and L5
standard connectors
CGT78 Connector Ground Kit fits all L5, V5, A5, OnePiece,
and Positive Stop series connectors
CGT114 Connector Ground Kit fits all L6 and V6 series connectors
CGT158 Connector Ground Kit fits all L7 and V7 series connectors
CGT214 Connector Ground Kit fits all L12 series connectors
22
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 22
23
Compact SureGround Ordering Information
HELIAX
Cable Type 24 36 60
factory attached lug factory attached lug field attached lug
1/4" and 3/8", EW240 223158-2 223158-3 223158-4
1/2", EW180, EW220 241088-1 241088-6 241545
5/8" and 7/8", EW85, EW90, EW127A, EW132 241088-2 241088-7 220497
1-1/4", EW64, EW77 241088-3 241088-8 241088-60
1-5/8", EW52, EW63 241088-4 241088-9 220498
EW43 204989-10 241088-64 204989-28
2-1/4" and 3", EW28, EW34, EW37 241088-5 241088-10 223700-724
4", EW17, EW20 204989-6 NA NA
5" 204989-7 NA NA
SureGround Plus Ordering Information
HELIAX
Cable Type 60
field attached lug
1/2" - 1-5/8" (EW180-EW63) UG12158-15B4
Grounding Kits
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 23
Grounding Bars
lightning protection
2 Ground Buss Bar
Part Number Description
2" x 10" Ground Buss Bar Kits
Bare Copper
UGBKIT-0210 Universal Ground Buss Bar Kit, 1/4" x 2" x 10"
(6.4 mm x 50.8 mm x 254.0 mm)
with Universal Buss Bar Hardware Kit
Tinned Copper
UGBKIT-0210-T Universal Tinned Ground Buss Bar Kit,1/4" x 2" x 10"
(6.4 mm x 50.8 mm x 254.0 mm)
with Universal Buss Bar Hardware Kit
2" x 12" Ground Buss Bar Kits
Bare Copper
UGBKIT-0212 Universal Ground Buss Bar Kit, 1/4" x 2" x 12"
(6.4 mm x 50.8 mm x 304.8 mm)
with Universal Buss Bar Hardware Kit.
Tinned Copper
UGBKIT-0212-T Universal Tinned Ground Buss Bar Kit, 1/4" x 2" x 12"
(6.4 mm x 50.8 mm x 304.8 mm)
with Universal Buss Bar Hardware Kit.
2" x 14" Ground Buss Bar Kits
Bare Copper
UGBKIT-0214 Universal Ground Buss Bar Kit, 1/4" x 2" x 14"
(6.4 mm x 50.8 mm x 355.6 mm)
with Universal Buss Bar Hardware Kit.
Tinned Copper
UGBKIT-0214-T Universal Tinned Ground Buss Bar Kit,
1/4" x 2" x 14"
(6.4 mm x 50.8 mm x 355.6 mm)
with Universal Buss Bar Hardware Kit.
2-1/2 Ground Buss Bar
Part Number Description
2-1/2" x 12-1/2" Ground Buss Bar Kits
Bare Copper
UGBKIT-2 Universal Ground Buss Bar Kit, 1/4" x 2-1/2" x 12-1/2"
(6.4 mm x 63.5 mm x 317.5 mm)
with Universal Buss Bar Hardware Kit.
Tinned Copper
UGBKIT-2T Universal Tinned Ground Buss Bar Kit,
1/4" x 2-1/2" x 12-1/2"
(6.4 mm x 63.5 mm x 317.5 mm)
with Universal Buss Bar Hardware Kit.
2-1/2" x 19-1/2" Ground Buss Bar Kits
Bare Copper
UGBKIT Universal Ground Buss Bar Kit, 1/4" x 2-1/2" x 19-1/2"
(6.4 mm x 63.5 mm x 495.3 mm)
with Universal Buss Bar Hardware Kit.
Tinned Copper
UGBKIT-T Universal Tinned Ground Buss Bar Kit,
1/4" x 2-1/2" x 19-1/2"
(6.4 mm x 63.5 mm x 495.3 mm)
with Universal Buss Bar Hardware Kit.
Andrew offers a complete range of grounding buss bar sizes
and hole pattern configurations to accomodate just about any
application. Each grounding bar is made from 1/4 solid copper
bar stock and is available with optional tin plating. Kits come
complete with insulators, stainless steel brackets, adapters, and
hardware for mounting to a wall or tower.
24
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 24
Universal Arrestor
Ground Bar Assembly
This pre-punched solid copper ground
bar assembly simplifies mounting and
grounding of surge arrestors inside the
building. Instead of relying on
individual wires or field-fabricated
trapeze setups, the Andrew Universal Arrestor Ground Bar Assembly
provides a uniform mounting and grounding point for surge arrestors and
grounding leads. The 1/8" assembly uses three horizontal members that
can be oriented flat or upright and adjusted vertically as needed to
accommodate various surge arrestor types. Also included is a mounting
kit that includes ceiling brackets, insulators, threaded rod, and hardware.
Compatible with standard entry port sizes
Height-adjustable bars
Solid copper construction
Accepts bulkhead or bolt grounded surge arrestors
Accommodates one- and two-hole grounding lugs
Eliminates need for internal buss bar
Type Number and Description
UGBA-DIN-36 - Universal Ground Bar Assembly with three 6-position
ground bars punched for oversized 7-16 DIN mount arrestors
(APTL and APT series) or bolt-grounded arrestors.
UGBA-36 - Universal Ground Bar Assembly with three 6-position ground
bars punched for most 7-16 DIN, Type N, or bolt-grounded arrestors.
(Andrew APG and APM series arrestors)
UGBA-DIN-34 - Universal Ground Bar Assembly with three 4-position
ground bars punched for oversized 7-16 DIN mount arrestors
(APTL and APT series) or bolt-grounded arrestors.
UGBA-34 - Universal Ground Bar Assembly with three 4-position ground
bars punched for most 7-16 DIN, type N or bolt-grounded arrestors.
(Andrew APG and APM series arrestors)
25
4 Ground Buss Bar
Part Number Description
4" x 12" Ground Buss Bar Kits
Bare Copper
UGBKIT-0412 Universal Ground Buss Bar Kit, 1/4" x 4" x 12"
(6.3 mm x 101.6 mm x 304.8 mm)
with Universal Buss Bar Hardware Kit.
Tinned Copper
UGBKIT-0412-T Universal Tinned Ground Buss Bar Kit, 1/4" x 4" x 12"
(6.3 mm x 101.6 mm x 304.8 mm)
with Universal Buss Bar Hardware Kit
4" x 14" Ground Buss Bar Kits
Bare Copper
UGBKIT-0414 Universal Ground Buss Bar Kit, 1/4" x 4" x 14"
(6.3 mm x 101.6 mm x 355.6 mm)
with Universal Buss Bar Hardware Kit.
Tinned Copper
UGBKIT-0414-T Universal Tinned Ground Buss Bar Kit, 1/4" x 4" x 14"
(6.3 mm x 101.6 mm x 355.6 mm)
with Universal Buss Bar Hardware Kit.
4" x 20" Ground Buss Bar Kits
Bare Copper
UGBKIT-0420 Universal Ground Buss Bar Kit, 1/4" x 4" x 20"
(6.3 mm x 101.6 mm x 508.0 mm)
with Universal Buss Bar Hardware Kit.
Tinned Copper
UGBKIT-0420-T Universal Tinned Ground Buss Bar Kit, 1/4" x 4" x 20"
(6.3 mm x 101.6 mm x 508.0 mm)
with Universal Buss Bar Hardware Kit.
4" x 24" Ground Buss Bar Kits
Bare Copper
UGBKIT-0424 Universal Ground Buss Bar Kit, 1/4" x 4" x 24"
(6.3 mm x 101.6 mm x 609.6 mm)
with Universal Buss Bar Hardware Kit.
Tinned Copper
UGBKIT-0424-T Universal Tinned Ground Buss Bar Kit, 1/4" x 4" x 24"
(6.3 mm x 101.6 mm x 609.6 mm)
with Universal Buss Bar Hardware Kit.
Grounding Bars
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 25
26
Arrestor Plus
training registration
Technical information
Tailored Partner Portals
Andrew Catalog 38
Andrew Access webzine
News and Events, and much more!
Now www.andrew.com makes it easier than ever to do business with
the worlds provider of RF subsystem solutions.
Planning Software
AASP the first and only PCS/Cellular Systems Design Software
Design your PCS or cellular system in less time,
with greater accuracy, and lower costs with
advanced Andrew Antenna Systems Planner
software (AASP). Powerful AASP software
graphically guides you through the entire
design process, from the choice of frequency
to the available shipping options. The
programs dynamic, rule-based logic generates
custom solutions by using standard Andrew
products while automatically checking component
compatibility. Upon completion, AASP provides you with a customized
bill of materials of the Andrew parts necessary for the system.
Customer Support Center (CSC)
Service Around the Clock, Around the World
Andrew Corporations CSC provides easy
access to comprehensive technical and
customer support including product
information, catalog guidance, and other
reference information to Andrew customers
worldwide.
Contact the Andrew Customer Support Center for:
Technical support
Order status
Replacement materials
Product information
Coordinating product service, repairs, or replacement
Call toll free from:
North America . . . . . . . . . . . . . . . . . . . .1-800-255-1479
Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-800-349-5444
International:
United Kingdom . . . . . . . . . . . . . . . . . . . . .0800-250055
Australia . . . . . . . . . . . . . . . . . . . . . . . . . .1800-803 219
New Zealand . . . . . . . . . . . . . . . . . . . . . .0800-441-747
Call from other areas: . . . . . . . . . . . . . .+1 708-873-2307
OnePack
SM
Site Kits
The Answer for More Efficient
System Build-outs
Todays global build-out demands new
solutions that speed system deployment
and simplify supply chain
management. To help system
managers better achieve these
goals, Andrew offers kits for
wireless RF communications
systems sites. OnePack Site Kits
provide the critical components in
easy to order, easy to manage packages. System designers and
managers can be confident of shortened project planning and execution
cycles, improved efficiency, and dependable system performance.
AASP is available on the Andrew Powertools
TM
CD-Rom
or as a download from www.andrew.com
services
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 27
Installation Techniques to Ensure Quality!
Andrew products and people are at the forefront of connecting the
wireless world. As the industry evolves, the Andrew Institute
is
committed to providing you with quality, effective training. Our trainers
deliver knowledge that can develop your skills and self-assurance, as
well as benefit your system performance and reliability. Dedicated
Andrew Institute trainers will share their proven installation techniques
and expertise with you in one or two-day sessions.
Build an Agenda Customize Your Training:
Connector Attachment (1 hour per connector)
Cable concepts
Connector attachment
Accessories
Fundamentals of VSWR (3 hours)
Typical site configuration
Plot/sweep interpretation
Troubleshooting
Base Station Antennas (4 hours)
Antenna concepts
Mounting techniques
Weatherproofing
Inspection and maintenance
Terrestrial Microwave Systems (2 days)
RF theory/TMW fundamentals
Antenna installation
Path alignment
Pressurization fundamentals
Benefits of Andrew Institute
Technical Training
You will learn:
how to obtain the highest
possible performance with
every Andrew product installed.
system fundamentals and how
components work together.
proper installation of cable, connectors,
and accessories through hands-on practice.
TMW systems fundamentals and essential elements of path alignment.
pressurization systems theory of operation and installation techniques.
proper path alignment.
fundamentals of VSWR sweep testing, insertion loss and
TDR/FDR plots.
The Andrew Institute welcomes the opportunity to serve the industry.
We can bring select courses to your facility, or you can come to
any one of our seven convenient training locations.
For more information visit our Web site at: www.andrew.com
Registration is available online or call: +1-708-873-2644
More customers are mandating that
technicians installing their systems
are registered as having completed
Andrew Institute training.
Orland Park, Illinois USA
Lochgelly, Scotland
Coignieres, France
Sorocaba, Brazil
Sandton, South Africa
Suzhou, China
services
28
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 28
29
Quarterwave Stub Surge Arrestors
Considerations and Selection
Quarterwave Stub (QWS) Surge Arrestor Technology
An understanding of the key concepts of quarterwave stub technology and
its relationship to lightning transients can be of great benefit to transmission
line system designers and operators. With this understanding, system
designers and operators can more fully utilize lightning protection systems
that use QWS technology as well as understand the critical role multistrike
ability plays in lightning protection systems.
Arrestor Plus
Surge Arrestors.
To understand QWS technology, one needs to understand lightning.
The lightning transient is characterized by a current waveform with an
8-microsecond rise time (time to reach 90% of the peak value) and
a 20-microsecond decay time (time to decay to 50% of the peak value).
Peak currents can reach excessive values, but 50% of all strikes will reach
values of only 18 kA. It is important to remember that this is only
a laboratory characterization of the lightning transient, but it facilitates
standardized testing techniques for the industry. Figure 1 depicts an actual
laboratory-generated 8/20 sec waveform that was used to evaluate
Andrew Surge Arrestors. For more detailed information regarding
laboratory generated surge waveforms, see IEC 60-2,
ANSI-IEEE Std 4-1978, and ANSI C62.1-1984.
The substantial energy associated with lightning transients has frequency
components near dc with components of decreasing value of energy
extending through 160 kHz.
The effectiveness of surge arrestors is characterized by the throughput
energy and the ability to withstand multiple surges. These characteristics
are readily measurable in a laboratory equipped with the appropriate test
equipment. Throughput energy is a measure of the amount of energy
passed through the output of the device when the input of the device is
subjected to a lightning transient waveform. The throughput energy can
be calculated from the residual voltage waveform using the relationship:
Figure 2 shows the residual output voltage present when an APT Series
Surge Arrestor was subjected to an actual 8/20 sec waveform with a
peak current of 20 kA. In this case, the residual voltage was recorded
across a 50 ohm load. The resulting throughput energy was 72
microjoules. The objective of the surge arrestor is to minimize the
throughput energy to a manageable level. Most microwave transmitters
and receivers used in todays wireless systems are capable of
withstanding throughput energy levels of 10 millijoules or less.
The ability to withstand multiple strikes is also an important measure
of surge arrestor merit. Multistrike ability is measured by subjecting the
QWS surge arrestors to repeated surges and observing if the arrestors
continue to properly function or show signs of degradation. No evidence
of failure or degradation was observed after subjecting the Andrew
Arrestor Plus
Area
c
x D
Ground Flash
x H
2
x 10
-6
Strikes per Year, 50 foot tower: As an example, a 50-foot tower in
the Chicago area will average 0.040 strikes per year (or this can be
interpreted as 1 strike every 24.6 years). The calculations were based
on a 50-foot (15.24 meters) height, 3.5-meter width, 3.5-meter length,
latitude of 42 degrees, and an isokeraunic level of 41 thunderstorm
days per year.
Strikes per Year, 100 foot tower: As an example, a 100-foot tower
in the Chicago area will average 0.153 strikes per year (or this can
be interpreted as 1 strike every 6.5 years). The calculations were based
on a 100-foot (30.48 meters) height, 3.5-meter width, 3.5-meter length,
latitude of 42 degrees, and an isokeraunic level of 41 thunderstorm
days per year.
Strikes per Year, 200 foot tower: As an example, a 200-foot tower
in the Chicago area will average 0.591 strikes per year (or this can be
interpreted as 1 strike every 1.7 years). The calculations were based
on a 200-foot (60.96 meters) height, 3.5-meter width, 3.5-meter length,
latitude of 42 degrees, and an isokeraunic level of 41 thunderstorm
days per year.
It is important to remember that these are statistical calculations based on
many years of observation. When lightning strikes within even a few
kilometers of the tower, damaging transients can be coupled and carried
on any transmission lines, data lines, and power lines in the vicinity and
cause damaging effects within the area of the tower.
References
1 IEC 1312-1, Protection Against Lightning Electromagnetic Impulse
2 IEEE C62.41-1991, IEEE Recommended Practice on Surge Voltages in Low-Voltage ac Power Circuits
3 MIL-STD-188-124A, Military Standard for Grounding, Bonding and Shielding
4 MIL-HDBK-419A, Military Handbook for the Theory of Grounding, Bonding and Shielding of
Communications Electronics. Volume 1 (Basic Theory), Volume 2 (Applications)
5 MIL-STD-1757A, Lightning Qualification Test Techniques for Aerospace Vehicles and Hardware
6 National Electric Code 1993, Article 280
7 IEC 1024-1, Protection of Structures Against Lightning.
8 BS 6651, 1992 Code of Practice for Protection of Structures Against Lightning
9 Aleksa, J. and Stockman, C., A Flash of Beauty or a Force for Destruction?,
South African Wireless Communications, Aug 1997
10 Fisher, F.A. and Plumer, J.A., Lightning Protection of Aircraft, Lightning Technologies, 1990
Appendix 4
Isokeraunic Flash Ground Strikes per Year: Strikes per Year: Strikes per Year:
Location Level Latitude Density Flash Density 50-foot tower 100-foot tower 200-foot tower
Chicago, IL 41 42 33.60 9.95 0.041 0.153 0.591
Arlington, TX 48 33 46.10 9.85 0.040 0.151 0.585
Atlanta, GA 50 34 50.00 11.30 0.046 0.173 0.671
Tampa, FL 100 28 200.00 35.00 0.143 0.537 2.081
York, UK 9 53 1.62 0.67 0.003 0.010 0.039
Taiwan 20 23 8.00 1.27 0.005 0.019 0.075
Hong Kong 30 23 18.00 2.85 0.012 0.043 0.170
Singapore 140 2 392.00 39.30 0.160 0.604 2.340
Rio de Janeiro 60 23 72.00 11.40 0.046 0.175 0.679
P
fraction
P
fraction
Lightning Strike Statistics and Definitions
Statistics on the Probability of a Lightning Strike to Towers of Various Heights in Various Locations on Earth
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 35
Appendix 5
Cable Hoisting and Attachment Bulletin Number/SP
Support/ Hoisting Grips for HELIAX
Cables 237409
Hoisting Grips 17262
Click-On Hangers 3969A
Click-On Hangers 237397
KwikClamp Hangers 10164
Standard Hanger Kits 37378
Type 31766A Hanger Kits 17783
Hanger Kits 37321
Round Member Adapter Kit (Click-On Hangers) 237515
Hoisting Grip and Cable Support Hangers (SP30-45)
Compact Angle Adapters 10140
Angle Adaptors (types 31768A, 243684, 243684-M) 237363
Hanger spacing guide lines 10883
Tools
HELIAX
Elliptical Waveguide
Recommended maximum hanger spacings are tabulated below for various
wind speed and ice conditions. The recommendations are based on
guidelines stated in EIA Standard RS-222 and new wind tunnel and
vibration tests. They supersede those in previous Andrew catalogs.
Installations in Typical Climates. Use the 125 mph (200 km/h), 1/2" ice
conditions, highlighted in red in the table.
Severe or Mild Climates. Use the wind speed and ice conditions that most
closely approximate the expected worst case conditions for the local climate.
44
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 44
45
AA-SL 243684 Angle Adaptor with 3/8" Tapped Holes
AA-SL-M10 243684-M Angle Adaptor with 10 mm Tapped Holes
AA-U SHA3 Universal Angle Adaptor
AA-US UA-3 Universal Angle Adaptor, Snap-in Version (Insert not included)
AK-45 42334 45 Degree Adaptor Kit
AT-K306-U UGBA-DINU-36 Arrestor Trapeze Kit
BA-114-1A 204679A-3 Boot Assembly Kit, 4" (101.6 mm) with 1 Hole for 1-1/4" corrugated coaxial cable
BA-114-1B 48939A-3 Boot Assembly Kit, 5" (127.0 mm) with 1 Hole for 1-1/4" corrugated coaxial cable
BA-12-1A 204679A-5 Boot Assembly Kit, 4" (101.6 mm) with 1 Hole for 1/2" corrugated coaxial cable
BA-12-1B 48939A-6 Boot Assembly Kit, 5" (127.0 mm) with 1 Hole for 1/2" corrugated coaxial cable
BA-12-2A NA 4" Boot Assembly
BA-12-2B NA 5" Boot Assembly
BA-12-3A 204679A-7 Boot Assembly Kit, 4" (101.6 mm) with 3 Holes for 1/2" corrugated coaxial cable
BA-12-3B 48939A-8 Boot Assembly Kit, 5" (127.0 mm) with 3 Holes for 1/2" corrugated coaxial cable
BA-12-4A NA 4" Boot Assembly
BA-12-5A NA 4" Boot Assembly
BA-12-5B NA 5" Boot Assembly
BA-127-1A WGB4-127 Boot Assembly Kit, 4" (101.6 mm) with 1 Hole for EW127 and WE130
BA-127-1B WGB5-127 Boot Assembly Kit, 5" (127.0 mm) with 1 Hole for EW127 and WE130
BA-12F-1A NA 4" diameter, One 1/2" flex, entry port boot assembly
BA-12F-1B NA 5" diameter, 1 LDF4, entry port boot assembly
BA-12F-2A NA 4" diameter, two 1/2" superflex, entry port boot assembly
BA-12F-2B NA 5" diameter, two hole for 1/2" superflex, entry port boot assembly
BA-12F-3A NA 4" diameter, three hole for 1/2" superflex, entry port boot assembly
BA-12F-3B NA 5" diameter, three hole for 1/2" superflex, entry port boot assembly
BA-12F-4A NA 4" diameter, four 1/2" superflex, entry port boot assembly
BA-12F-4B NA 5" Diameter, four 1/2" superflex, entry port boot assembly
BA-150-1A NA 4" Boot Assembly with 1 hole, EW150, EW132, and E150
BA-150-1A WGB4-132 Boot Assembly Kit, 4" (101.6 mm) with 1 Hole for WE150 and EW132
BA-150-1B WGB5-132 Boot Assembly Kit, 5" (127.0 mm) with 1 Hole for WE150 and EW132
BA-158-1A 204679A-4 Boot Assembly Kit, 4" (101.6 mm) with 1 Hole for 1-5/8" corrugated coaxial cable
BA-158-1B 48939A-4 Boot Assembly Kit, 5" (127.0 mm) with 1 Hole for 1-5/8" corrugated coaxial cable
BA-180-1A WGB4-180 Boot Assembly Kit, 4" (101.6 mm) with 1 Hole for EW180 and WE191
BA-180-1B WGB5-180 5" Boot Assembly with 1 hole, EW180
BA-214-1A 204679A-8 Boot Assembly Kit, 4" (101.6 mm) with 1 Hole for 2-1/4" corrugated coaxial cable
BA-214-1B 48939A-9 Boot Assembly Kit, 5" (127.0 mm) with 1 Hole for 2-1/4" corrugated coaxial cable
BA-220-1A WBG4-220 Boot Assembly Kit, 4" (101.6 mm) with 1 Hole for EW220
BA-220-1B WGB5-220 Boot Assembly Kit, 5" (127.0 mm) with 1 Hole for EW220
BA-37-1A WGB4-37 Boot Assembly Kit, 4" (101.6 mm) with 1 Hole for WE37
BA-37-1B WGB5-37 Boot Assembly Kit, 5" (127.0 mm) with 1 Hole for WE37
BA-400 NA 4" (101.6 mm) Boot Assembly, cushion not included
BA-46-1A NA 4" Boot Assembly with 1 hole, EW46
BA-46-1B NA 5" Boot Assembly with 1 hole, EW47
BA-500 NA 5" (127.0 mm) Boot Assembly, cushion not included
BA-52-1A WGB4-52 Boot Assembly Kit, 4" (101.6 mm) with 1 Hole for EW52 and WE61
BA-52-1B WGB5-52 Boot Assembly Kit, 5" (127.0 mm) with 1 Hole for EW52 and WE61
BA-58-1A 204679A-13 Boot Assembly Kit, 4" (101.6 mm) with 1 Hole for 5/8" corrugated coaxial cable
BA-58-1B 48939A-14 Boot Assembly Kit, 5" (127.0 mm) with 1 Hole for 5/8" corrugated coaxial cable
BA-58-2A NA 4" Boot Assembly
BA-58-2B NA 5" Boot Assembly
Appendix 7
Installation Accessories Part Number Cross Reference MTS to Andrew
MTS No. Andrew No. Description
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 45
46
BA-58-3A 204679A-14 Boot Assembly Kit, 4" (101.6 mm) with 3 Holes for 5/8" corrugated coaxial cable
BA-58-3B 48939A-15 Boot Assembly Kit, 5" (127.0 mm) with 3 Holes for 5/8" corrugated coaxial cable
BA-58-4B NA 5" Boot Assembly
BA-63-1A WGB4-63 Boot Assembly Kit, 4" (101.6 mm) with 1 Hole for EW63 and WE65
BA-63-1B WGB5-63 Boot Assembly Kit, 5" (127.0 mm) with 1 Hole for EW63 and WE65
BA-77-1A WGB4-77 Boot Assembly Kit, 4" (101.6 mm) with 1 Hole for EW77 and WE78
BA-77-1B WGB5-77 Boot Assembly Kit, 5" (127.0 mm) with 1 Hole for EW77 and WE78
BA-78-1A 204679A-2 Boot Assembly Kit, 4" (101.6 mm) with 1 Hole for 7/8" corrugated coaxial cable
BA-78-1B 48939A-1 Boot Assembly Kit, 5" (127.0 mm) with 1 Hole for 7/8" corrugated coaxial cable
BA-78-2A 204679A-18 Boot Assembly Kit, 4" (101.6 mm) with 2 Holes for 7/8" corrugated coaxial cable
BA-78-2B 204679A-18 5" Boot Assembly
BA-78-3A 204679A-15 Boot Assembly Kit, 4" (101.6 mm) with 3 Holes for 7/8" corrugated coaxial cable
BA-78-3B 48939A-2 Boot Assembly Kit, 5" (127.0 mm) with 3 Holes for 7/8" corrugated coaxial cable
BA-78-4A NA 4" Boot Assembly
BA-78-4B NA 5" Boot Assembly
BA-85-1A NA 4 " diameter, One hole for EW85 and WE108, entry port boot assembly
BA-85-1B NA 5 " diameter, One hole for EW85 and WE108, entry port boot assembly
BA-90-1A WGB4-90 Boot Assembly Kit, 4" (101.6 mm) with 1 Hole for EW90
BA-90-1B WGB5-90 Boot Assembly Kit, 5" (127.0 mm) with 1 Hole for EW90
BH-114-NH 42396A-1 Butterfly Hanger Kit for 1-1/4" corrugated and LMR-1700 coaxial cable
BH-127-NH 42396A-9 Butterfly Hanger Kit for EW127, EW132, WE130, and WE150
BH-12-NH 43211A Butterfly Hanger Kit for 1/2" corrugated, smooth wall, and LMR-600 coaxial cable
BH-158-NH 42396A-2 Butterfly Hanger Kit for 1-5/8" corrugated and smooth wall coaxial cable
BH-180-NH 43211A Butterfly Hanger Kit for EW180 and WE191
BH-214-NH 42396A-4 Butterfly Hanger Kit for 2-1/4" corrugated coaxial cable
BH-43-NH 42396A-16 Butterfly hanger for EW43
BH-52-NH 42396A-8 Butterfly hanger for EW52
BH-58-NH 42396A-9 Butterfly Hanger Kit for 5/8" corrugated and LMR-900 coaxial cable
BH-63-NH 42396A-1 Butterfly Hanger Kit for EW63 and WE65
BH-64-NH 42396A-1 Butterfly Hanger Kit for EW64
BH-77-NH 42396A-11 Butterfly hanger for EW77
BH-78-NH 42396A-5 Butterfly Hanger Kit for 7/8" corrugated, smooth wall, and LMR-1200 coaxial cable
BH-85-NH 42396A-5 Butterfly Hanger Kit for EW85, EW90, and WE108
BH-S114-NH 42396A-1 Standard Hanger for 1-1/4" corrugated coaxial cable
BH-S12-NH 43211A Standard Hanger for 1/2" corrugated and smooth wall coaxial cable
BH-S158-NH 42396A-2 Standard Hanger for 1-5/8" corrugated and smooth wall coaxial cable
BH-S214-NH NA Standard hanger for 2-1/4" cable
BH-S38-NH 43211A Standard Hanger for 3/8" corrugated and smooth wall coaxial cable
BH-S58-NH NA Standard hanger for 5/8" cable
BH-S78-NH 42396A-5 Standard Hanger for 7/8" corrugated and smooth wall coaxial cable
CB-114 L6CLICK Mini Coax Support Blocks for 1-1/4" corrugated coaxial cable
CB-114H L6SCLICK Hanger Clamps for 1-1/4" coaxial cable
CB-114L NA Large Coax Support Blocks 1-1/4"
CB-12 L4CLICK Mini Coax Support Blocks for 1/2" corrugated coaxial cable
CB-1200T NA Mini Coax Support Block for LMR-1200
CB-12CR NA Mini Coax Support Block for 1/2" smooth wall coaxial cable
CB-12H L4SCLICK Hanger Clamps for 1/2" coaxial cable
CB-12L NA Large Coax Support Blocks 1/2"
CB-158 L7CLICK Mini Coax Support Blocks for 1-5/8" corrugated coaxial cable
CB-158CR L7CLICK Mini Coax Support Blocks for 1-5/8" smooth wall coaxial cable
Installation Accessories Part Number Cross Reference MTS to Andrew
MTS No. Andrew No. Description
Appendix 7
appendixes
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 46
47
CB-158H L7SCLICK Hanger Clamps for 1-5/8" coaxial cable
CB-158L NA Large Coax Support Blocks 1-5/8"
CB-1700T NA Mini Coax Support Block for LMR-1700
CB-214L NA Large Coax Support Blocks 2-1/4"
CB-58 L45CLICK Mini Coax Support Blocks for 5/8" corrugated coaxial cable
CB-58H NA Hanger Clamps for 5/8" coaxial cable
CB-78 L5CLICK Mini Coax Support Blocks for 7/8" corrugated coaxial cable
CB-78CR NA Mini Coax Support Block for 7/8" smooth wall coaxial cable
CB-78H L5SCLICK Hanger Clamps for 7/8" coaxial cable
CB-78L NA Large Coax Support Blocks 7/8"
CH-114-NH 42396A-1 Clip Hanger Kit for 1-1/4" corrugated coaxial cable
CH-114-NH NA Clip Hanger for 1-1/4" corruagated cable
CH-12-NH 43211A Clip Hanger Kit for 1/2" corrugated and smooth wall coaxial cable
CH-12-NH NA Clip Hanger for 1/2" corruagated cable
CH-158-NH 42396A-2 Clip Hanger for Kit 1-5/8" corrugated and smooth wall coaxial cable
CH-158-NH NA Clip Hanger for 1-5/8" corruagated cable
CH-78-NH 42396A-5 Clip Hanger Kit for 7/8" corrugated and smooth wall coaxial cable
CH-78-NH NA Clip Hanger for 7/8" corruagated cable
CH-A114-1 NA Cushion Hanger Assembly with 1 Hole for 1-1/4" corrugated coaxial cable
CH-A12-1 NA Cushion Hanger Assembly with 1 Hole for 1/2" corrugated coaxial cable
CH-A12-2 NA Cushion Hanger Assembly with 2 Holes for 1/2" corrugated coaxial cable
CH-A12-3 NA Cushion Hanger Assembly with 3 Holes for 1/2" corrugated coaxial cable
CH-A12-4 NA Cushion Hanger Assembly with 4 Holes for 1/2" corrugated coaxial cable
CH-A12-5 NA Cushion Hanger Assembly with 5 Holes for SO Cord/Flashhead Cable
CH-A158-1 NA Cushion Hanger Assembly with 1 Hole for 1-5/8" corrugated coaxial cable
CH-A214-1 NA Cushion Hanger Assembly with 1 Hole for 2-1/4" corrugated coaxial cable
CH-A78-1 NA Cushion Hanger Assembly with 1 Hole for 7/8" corrugated coaxial cable
CH-A78-2 NA Cushion Hanger Assembly with 2 Holes for 7/8" corrugated coaxial cable
CH-A78-3 NA Cushion Hanger Assembly with 3 Holes for 7/8" corrugated coaxial cable
CH-A78-4 NA Cushion Hanger Assembly with 4 Holes for 7/8" corrugated coaxial cable
CP-114 PLUG-114 Cushion Plug for 1-1/4" corrugated coaxial cable
CP-12 PLUG-12 Cushion Plug for 1/2" corrugated coaxial cable
CP-158 PLUG-158 Cushion Plug for 1-5/8" corrugated coaxial cable
CP-38 NA Cushion Plug, 3/8" cable, kit of 5
CP-58 NA Cushion Plug, 5/8" cable, kit of 5
CP-78 PLUG-78 Cushion Plug for 7/8" corrugated coaxial cable
CS-A12 245174 Coldshrink weatherproofing kit 1/2" to 7/8" jumper to antenna
CS-A1F 245174 Coldshrink weatherproofing kit 1/2" to 7/8" jumper to antenna
CS-A58 245174 Coldshrink weatherproofing kit 1/2" to 7/8" jumper to antenna
CS-BS SHA3 Mini Cluster Support bracket
CS-U1212 245173 3M Cold Shrink, 1/2" to 1/2"
CS-U12158 245172 3M Cold Shrink
CS-U12214 245175 3M Cold Shrink, 1/2" to 2-1/4"
CS-U1278 245171 3M Cold Shrink, 1/2" to 7/8"
CS-U5858 241474-7 Coldshrink weatherproofing kit 5/8" to 5/8"
EP-1033 204673-9 Entry Panel, 9 port, 3 x 3
EP-1113 48940-9 Entry Panel, 9 port, 3 x 3
EP-1118 204673-12 Entry Panel, 12 port, 3 x 4, Standard
EP-1191 48940-8 Entry Panel, 8 port, 2 x 4
EP-1199 NA Entry Panel, 4 port, 2 x 2
Appendix 7
Installation Accessories Part Number Cross Reference MTS to Andrew
MTS No. Andrew No. Description
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 47
48
EP-1297 204673-10 Entry Panel, 10 port, 2 x 5
EP-1333 204673-18 Entry Panel, 18 port, 3 x 6
EP-1334 204673-12 Entry Panel, 12 port, 3 x 4, Large
EP-1336 204673-12A 4" Wall roof feed thru plate, twelve opening (2 X 6)
EP-1338 204673-8 Entry Panel, 8 port, 2 x 4, Large
EP-1340 204673-24 Entry Panel, 24 port, 4 x 6
EP-1447 204673-16 Entry Panel, 16 port, 4 x 4
EP-1448 204673-2A Entry Panel, 2 port, 1 x 2
EP-1449 204673-6 Entry Panel, 6 port, 2 x 3
EP-1635 204673-3 Entry Panel, 3 port, 1 x 3
EP-1861 204673-20 4" (101.6 mm) Entry Panel, 20 port, 4 x 5
EP-220 204673-1 Entry Panel, 1 port, 1 x 1, Standard
EP-549 48940-1 Entry Panel, 1 port, 1 x 1
EP-550 48940-2 Entry Panel, 2 port, 1 x 2
EP-551 48940-3 Entry Panel, 3 port, 1 x 3
EP-552 48940-4 Entry Panel, 4 port, 2 x 2
EP-553 48940-6 Entry Panel, 6 port, 2 x 3
EP-574 204673-2 Entry Panel, 1 port, 1 x 1, Compact
EP-575 204673-4 Entry Panel, 4 port, 1 x 4
EP-576 204673-8 Entry Panel, 8 port, 2 x 4, Standard
GB-0210-NH NA Ground Buss Bar, 1/4" x 2" x 10" (6.4 mm x 50.8 mm x 254.0 mm). Hardware not included.
GB-0210T-NH NA Tinned Ground Buss Bar, 1/4" x 2" x 10" (6.4 mm x 50.8 mm x 254.0 mm). Hardware not included.
GB-0210T-U UGBKIT-0210-T Tinned Ground Buss Bar Kit, 1/4" x 2" x 10" (6.4 mm x 50.8 mm x 254.0 mm)
GB-0210-U UGBKIT-0210 Ground Buss Bar Kit, 1/4" x 2" x 10" (6.4 mm x 50.8 mm x 254.0 mm)
GB-0212-NH NA Ground Buss Bar, 1/4" x 2" x 12". (6.4 mm x 50.8 mm x 304.8 mm). Hardware not included.
GB-0212T-NH NA Tinned Ground Buss Bar, 1/4" x 2" x 12". (6.4 mm x 50.8 mm x 304.8 mm). Hardware not included.
GB-0212T-U UGBKIT-0212-T Tinned Ground Buss Bar Kit, 1/4" x 2" x 12" (6.4 mm x 50.8 mm x 304.8 mm)
GB-0212-U UGBKIT-0212 Ground Buss Bar Kit, 1/4" x 2" x 12" (6.4 mm x 50.8 mm x 304.8 mm)
GB-0214-NH NA Ground Buss Bar, 1/4" x 2" x 14" (6.4 mm x 50.8 mm x 355.6 mm). Hardware not included.
GB-0214T-NH NA Tinned Ground Buss Bar, 1/4" x 2" x 14" (6.4 mm x 50.8 mm x 355.6 mm). Hardware not included.
GB-0214T-U UGBKIT-0214-T Tinned Ground Buss Bar Kit, 1/4" x 2" x 14" (6.4 mm x 50.8 mm x 355.6 mm)
GB-0214-U UGBKIT-0214 Ground Buss Bar Kit, 1/4" x 2" x 14" (6.4 mm x 50.8 mm x 355.6 mm)
GB-02512-NH NA Ground Buss Bar, 1/4" x 2-1/2" x 12-1/2" (6.4 mm x 63.5 mm x 317.5 mm). Hardware not included.
GB-02512T-NH NA Tinned Ground Buss Bar, 1/4" x 2-1/2" x 12-1/2" (6.4 mm x 63.5 mm x 317.5 mm). Hardware not included.
GB-02512T-U UGBKIT-2T Tinned Ground Buss Bar Kit, 1/4" x 2-1/2" x 12-1/2" (6.4 mm x 63.5 mm x 317.5 mm)
GB-02512-U UGBKIT-2 Universal Ground Bar 2.5" x 12.5"
GB-02519-NH NA Ground Buss Bar, 1/4" x 2-1/2" x 19-1/2" (6.4 mm x 63.5 mm x 495.3 mm). Hardware not included.
GB-02519T-NH NA Tinned Ground Buss Bar, 1/4" x 2-1/2" x 19-1/2" (6.4 mm x 63.5 mm x 495.3 mm). Hardware not included.
GB-02519T-U UGBKIT-T Tinned Ground Buss Bar Kit, 1/4" x 2-1/2" x 19-1/2" (6.4 mm x 63.5 mm x 495.3 mm)
GB-02519-U UGBKIT Universal Ground Bar 2.5" x 19.5"
GB-0412-NH NA Ground Buss Bar, 1/4" x 4" x 12" (6.3 mm x 101.6 mm x 304.8 mm). Hardware not included.
GB-0412T-NH NA Tinned Ground Buss Bar, 1/4" x 4" x 12" (6.3 mm x 101.6 mm x 304.8 mm). Hardware not included.
GB-0412T-U UGBKIT-0412-T Tinned Ground Buss Bar Kit, 1/4" x 4" x 12" (6.3 mm x 101.6 mm x 304.8 mm)
GB-0412-U UGBKIT-0412 Ground Buss Bar Kit, 1/4" x 4" x 12" (6.3 mm x 101.6 mm x 304.8 mm)
GB-0414-NH NA Ground Buss Bar, 1/4" x 4" x 14" (6.3 mm x 101.6 mm x 355.6 mm). Hardware not included.
GB-0414T-NH NA Tinned Ground Buss Bar, 1/4" x 4" x 14" (6.3 mm x 101.6 mm x 355.6 mm). Hardware not included.
GB-0414T-U UGBKIT-0414-T Tinned Ground Buss Bar Kit, 1/4" x 4" x 14" (6.3 mm x 101.6 mm x 355.6 mm)
GB-0414-U UGBKIT-0414 Ground Buss Bar Kit, 1/4" x 4" x 14" (6.3 mm x 101.6 mm x 355.6 mm)
GB-0420-NH NA Ground Buss Bar, 1/4" x 4" x 20" (6.3 mm x 101.6 mm x 508.0 mm). Hardware not included.
GB-0420T-NH NA Tinned Ground Buss Bar, 1/4" x 4" x 20" (6.3 mm x 101.6 mm x 508.0 mm). Hardware not included.
Appendix 7
appendixes
Installation Accessories Part Number Cross Reference MTS to Andrew
MTS No. Andrew No. Description
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 48
49
GB-0420T-U UGBKIT-0420-T Tinned Ground Buss Bar Kit, 1/4" x 4" x 20" (6.3 mm x 101.6 mm x 508.0 mm)
GB-0420-U UGBKIT-0420 Ground Buss Bar Kit, 1/4" x 4" x 20" (6.3 mm x 101.6 mm x 508.0 mm)
GB-0424-NH NA Ground Buss Bar, 1/4" x 4" x 24" (6.3 mm x 101.6 mm x 609.6 mm). Hardware not included.
GB-0424T-NH NA Tinned Ground Buss Bar, 1/4" x 4" x 24" (6.3 mm x 101.6 mm x 609.6 mm). Hardware not included.
GB-0424T-U UGBKIT-0424-T Tinned Ground Buss Bar Kit, 1/4" x 4" x 24" (6.3 mm x 101.6 mm x 609.6 mm)
GB-0424-U UGBKIT-0424 Ground Buss Bar Kit, 1/4" x 4" x 24" (6.3 mm x 101.6 mm x 609.6 mm)
GB-HK-U NA Universal Ground Bar Attachment Kit
GK-C114 SGL6-15B4 Clip-on Ground Kit for 1-1/4" corrugated coaxial cable
GK-C114-2H2 SGL6-06B2 Clip-on Ground Kit for 1-1/4" corrugated coaxial. Includes 2' (0.6 m) lead with attached 3/8" (9.5 mm) two-hole lug.
GK-C12 SGL4-15B4 Clip-on Ground Kit for 1/2" corrugated coaxial. Includes 5' (1.5 m) lead with unattached 3/8" (9.5 mm) two-hole lug.
GK-C12-2H2 SGL4-06B2 Clip-on Ground Kit for 1/2" corrugated coaxial. Includes 2' (0.6 m) lead with attached 3/8" (9.5 mm) two-hole lug.
GK-C158 SGL7-15B4 Clip-on Ground Kit for 1-5/8" corrugated coaxial cable
GK-C158-2H2 SGL7-06B2 Clip-on Ground Kit for 1-5/8" corrugated coaxial. Includes 2' (0.6 m) lead with attached 3/8" (9.5 mm) two-hole lug.
GK-C214 SGL12-15B4 Clip-on Ground Kit for 2-1/4" corrugated coaxial. Includes 5' (1.5 m) lead with unattached 3/8" (9.5 mm) two-hole lug
GK-C214-2H2 SGL12-06B2 Clip-on Ground Kit for 2-1/4" corrugated coaxial. Includes 2' (0.6 m) lead with attached 3/8" (9.5 mm) two-hole lug.
GK-C58 SGL45-15B4 Clip-on Ground Kit for 5/8" corrugated coaxial. Includes 5' (1.5 m) lead with unattached 3/8" (9.5 mm) two-hole lug.
GK-C58-2H2 SGL45-06B2 Clip-on Ground Kit for 5/8" corrugated coaxial. Includes 2' (0.6 m) lead with attached 3/8" (9.5 mm) two-hole lug.
GK-C78 SGL5-15B4 Clip-on Ground Kit for 7/8" corrugated coaxial cable
GK-C78-2H2 SGL5-06B2 Clip-on Ground Kit for 7/8" corrugated coaxial. Includes 2' (0.6 m) lead with attached 3/8" (9.5 mm) two-hole lug.
GK-S114 241088-60 Standard Ground Kit for 1-1/4" corrugated coaxial cable
GK-S12 241545 Standard Ground Kit for 1/2" corrugated coaxial cable
GK-S1200T 220497 Standard Ground Kit for LMR-1200 coaxial cable
GK-S127 220497 Standard Grounding Kit: EW127
GK-S12AC 241545 Standard Ground Kit for 1/2" smooth wall coaxial cable
GK-S132 220497 Standard Grounding Kit: EW132
GK-S158 220498 Standard Ground Kit for 1-5/8" corrugated coaxial cable
GK-S158AC NA Standard Grounding Kit: 1-5/8" cable, smooth wall
GK-S158CR 220498 Standard Ground Kit for 1-5/8" smooth wall coaxial cable
GK-S1700T 241088-60 Standard Ground Kit for LMR-1700 coaxial cable
GK-S180 241545 Standard Ground Kit for EW180 and WE191
GK-S214 223700-724 Standard Ground Kit for 2-1/4" corrugated coaxial cable
GK-S220 241545 Standard Ground Kit for EW220
GK-S37 223700-724 Standard Ground Kit for WE37
GK-S38 223158-4 Standard Ground Kit for 3/8" corrugated coaxial cable
GK-S43 220498 Standard Ground Kit for EW43
GK-S46 220498 Standard Ground Kit for WE46
GK-S52 220498 Standard Ground Kit for EW52 and WE61
GK-S58 220497 Standard Ground Kit for 5/8" corrugated coaxial cable
GK-S58AC 220497 Standard Ground Kit for 5/8" smooth wall coaxial cable
GK-S600T 241545 Standard Ground Kit for LMR-600 coaxial cable
GK-S63 220498 Standard Ground Kit for EW63 and WE65
GK-S64 241088-60 Standard Ground Kit for EW64
GK-S77 241088-60 Standard Ground Kit for EW77 and WE78
GK-S78 220497 Standard Ground Kit for 7/8" corrugated coaxial cable
GK-S78AC 220497 Standard Ground Kit for 7/8" smooth wall coaxial cable
GK-S78CR 220497 Standard Ground Kit for 7/8" smooth wall coaxial cable
GK-S85 220497 Standard Ground Kit for EW85, EW90, and WE108
GK-U2H5-U UG12158-15B4 Universal Ground Kit, 5' (1.5 m) lead with unattached 1/4" (6.4 mm) and 3/8" (9.5 mm) two-hole lugs
HG-114 29961 Lace-Up Hoisting Grip for 1-1/4" corrugated and LMR-1700 coaxial cable
HG-114L L6SGRIP Pre-Laced Hoisting Grip for 1-1/4" corrugated and LMR-1700 coaxial cable
Appendix 7
Installation Accessories Part Number Cross Reference MTS to Andrew
MTS No. Andrew No. Description
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 49
50
HG-12 43094 Lace-Up Hoisting Grip for 1/2" corrugated, smooth wall, and LMR-600 coaxial cable
HG-127 29958 Lace-Up Hoisting Grip for EW122, EW127, EW132, WE122, WE130, WE150
HG-12L L4SGRIP Pre-Laced Hoisting Grip for 1/2" corrugated, smooth wall, and LMR-600 coaxial cable
HG-158 24312A Lace-Up Hoisting Grip for 1-5/8" corrugated and smooth wall coaxial cable
HG-158L L7SGRIP Pre-Laced Hoisting Grip for 1-5/8" corrugated and smooth wall coaxial cable
HG-180 43094 Lace-Up Hoisting Grip for EW180, WE190, WE191
HG-214 31535 Lace-Up Hoisting Grip for 2-1/4" corrugated coaxial cable
HG-214L L12SGRIP Pre-Laced Hoisting Grip for 2-1/4" coaxial cable
HG-37 NA Lace up hoisting grip for EW37
HG-38L L2SGRIP Pre-Laced Hoisting Grip for 3/8" corrugated coaxial cable
HG-43 31535 Lace-Up Hoisting Grip for EW43 and WE46
HG-52 24312A Lace-Up Hoisting Grip for EW52 and WE61
HG-58 29958 Lace-Up Hoisting Grip for 5/8" corrugated, smooth wall, and LMR-900 coaxial cable
HG-58L L45SGRIP Pre-Laced Hoisting Grip for 5/8" corrugated, smooth wall, and LMR-900 coaxial cable Pre-Laced Hoisting Grip for 7/8"
HG-64 29961 Lace-Up Hoisting Grip for EW63, EW64, WE65, WE70
HG-77 29961 Lace-Up Hoisting Grip for EW77, WE78
HG-78 19256B Lace-Up Hoisting Grip for 7/8" corrugated, smooth wall, and LMR-1200 coaxial cable
HG-78L L5SGRIP Pre-Laced Hoisting Grip for 7/8" corrugated, smooth wall, and LMR-1200 coaxial cable
HG-85 19256B Lace-Up Hoisting Grip for EW85, WE90, WE108
HK-100-10 31769-1 Hanger Hardware Kit, 3/8" x 1" (9.5 mm x 25.4 mm) slotted hex head screws, lock washers, and hex nuts
HK-34-10 31769-5 Hanger Hardware Kit, 3/8" x 3/4" slotted hex head screws, lock washers and hex nuts
HK-DSCB 243095-5 3/8" Galvanized Hardware Kit for two Coax Support Blocks
HK-DSCB158 243095-8 3/8" Galvanized Hardware Kit for two 1-5/8" or LMR-1700 Coax Support Blocks
HK-DSCB158-M10 NA 10 mm Stainless Steel Hardware for 1-5/8" - 2
HK-DSCB-M10 NA 10 mm Stainless Steel Hardware - 2
HK-ECBL NA Extender SS Hardware kit for Support Blocks
HK-ECBL158 NA Extender SS Hardware kit for 1-5/8" Support Blocks
HK-ECBL214 NA Extender SS Hardware kit for 2-1/4" Support Blocks
HK-M1020-10 243684-MH Hanger Hardware Kit, 10 mm x 20 mm slotted head bolts, lock washers, and hex nuts
HK-SCBL NA SS Hardware kit for Support Blocks
HK-SCBL158 NA SS Hardware kit for 1-5/8" Support Blocks
HK-SCBL214 NA SS Hardware kit for 2-1/4" Support Blocks
HK-SSCB 243095-9 3/8" Galvanized Hardware Kit for one Coax Support Block
HK-SSCB158 243095-12 3/8" Galvanized Hardware Kit for one 1-5/8" or LMR-1700 Coax Support Block
HK-SSCB158-M10 NA 10 mm Stainless Steel Hardware for 1-5/8" - 1
HK-SSCB-M10 NA 10 mm Stainless Steel Hardware - 1
HK-TSCB 243095-4 3/8" Galvanized Hardware Kit for three Coax Support Blocks
HK-TSCB158 243095-12 3/8" Galvanized Hardware Kit for three 1-5/8" or LMR-1700 Coax Support Blocks
HK-TSCB158-M10 NA 10 mm Stainless Steel Hardware for 1-5/8" - 3
HK-TSCB-M10 NA 10 mm Stainless Steel Hardware - 3
MT-464 9905-41 3/4" Electrical tape
MT-465-1 9905-71 2" Electical tape
MT-469-2 42615-4 Butyl tape
MT-8806-66 9905-41 3/4" Electrical tape
RM-A100 31670-1 Round Member Adaptor, 1"-2" OD (25.4 mm-50.8 mm OD)
RM-A200 31670-2 Round Member Adaptor, 2"-3" OD (50.8 mm-76.2 mm OD)
RM-A300 31670-3 Round Member Adaptor, 3"-4" OD (76.2 mm-101.6 mm OD)
RM-A400 31670-4 Round Member Adaptor, 4"-5" OD (101.6 mm-127.0 mm OD)
RM-A500 31670-5 Round Member Adaptor, 5"-6" OD (127.0 mm-152.4 mm OD)
RM-A600 31670-6 Round Member Adaptor, 6"-8" OD (152.4 mm-203.2 mm OD)
Appendix 7
appendixes
Installation Accessories Part Number Cross Reference MTS to Andrew
MTS No. Andrew No. Description
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 50
51
SA-38S NA Standoff Adapter with 3/8" tapped hole
SA-38S02 NA Standoff Adapter with 3/8" tapped hole, for members 1-2" OD
SA-38S100 30848-5 Stand-off Adaptor for 1"-2" OD (25.4 mm-50.8 mm OD) members
SA-38S200 30848-4 Stand-off Adaptor for 2"-3" OD (50.8 mm-76.2 mm OD) members
SA-38S300 30848-1 Stand-off Adaptor for 3"-4" OD (76.2 mm-101.6 mm OD) members
SA-38S400 30848-2 Stand-off Adaptor for 4"-5" OD (101.6 mm-127.0 mm OD) members
SA-38S500 30848-3 Stand-off Adaptor for 5"-6" OD (127.0 mm-152.4 mm OD) members
SA-S100-M13 NA Standoff 10 mm tapped hole
SA-S125-M14 NA Standoff 10 mm tapped hole
SA-S25-M10 NA Standoff 10 mm tapped hole
SA-S50-M10 NA Standoff 10 mm tapped hole
SA-S75-M12 NA Standoff 10 mm tapped hole
SA-S-M10 NA Standoff Adapter with 10 mm tapped hole
SA-SS NA Snap-In Stand-off Adapter
SA-SS02 NA Snap-In Stand-off Adapter, for members 1-2" OD
SA-SS100 STS-12 Universal Stand-off Adaptor for 1"-2" OD (25.4 mm-50.8 mm OD) members
SA-SS200 STS-23 Universal Stand-off Adaptor for 2"-3" OD (50.8 mm-76.2 mm OD) members
SA-SS300 STS-34 Universal Stand-off Adaptor for 3"-4" OD (76.2 mm-101.6 mm OD) members
SA-SS400 STS-45 Universal Stand-off Adaptor for 4"-5" OD (101.6 mm-127.0 mm OD) members
SA-SS500 NA Snap in tower standoff adapter (5" - 6")
SAUH UAAI Universal angle adapter insert
SC-114-1 NA Standard Port Cushion with 1 Hole for 1-1/4" corrugated coaxial cable
SC-12-1 NA Standard Port Cushion with 1 Hole for 1/2" corrugated coaxial cable
SC-12-2 NA Standard Port Cushion with 2 Holes for 1/2" corrugated coaxial cable
SC-12-3 NA Standard Port Cushion with 3 Holes for 1/2" corrugated coaxial cable
SC-12-4 NA Standard Port Cushion with 4 Holes for 1/2" corrugated coaxial cable
SC-12-5 NA Standard Port Cushion with 5 Holes 3/8" corrugated coaxial cable
SC-158-1 NA Standard Port Cushion with 1 Hole for 1-5/8" corrugated coaxial cable
SC-214-1 NA Standard Port Cushion with 1 Hole for 2-1/4" corrugated coaxial cable
SC-38-1 NA Standard Port Cushion with 1 Hole for 3/8" corrugated coaxial cable
SC-38-3 NA Standard Port Cushion with 3 Holes for 3/8" corrugated coaxial cable
SC-38-9 NA Standard Port Cushion with 9 Holes for 3/8" corrugated coaxial cable
SC-58-1 NA Standard Port Cushion with 1 Hole for 5/8" corrugated coaxial cable
SC-58-2 NA Standard Port Cushion with 2 Holes for 5/8" corrugated coaxial cable
SC-58-3 NA Standard Port Cushion with 3 Holes for 5/8" corrugated coaxial cable
SC-58-4 NA Standard Port Cushion with 4 Holes for 5/8" corrugated coaxial cable
SC-78-1 NA Standard Port Cushion with 1 Hole for 7/8" corrugated coaxial cable
SC-78-2 NA Standard Port Cushion with 2 Holes for 7/8" corrugated coaxial cable
SC-78-3 NA Standard Port Cushion with 3 Holes for 7/8" corrugated coaxial cable
SC-78-4 NA Standard Port Cushion with 4 Holes for 7/8" corrugated coaxial cable
SC-B NA Standard Port Cushion, Blank (no holes)
SH-U114 SSH-114 Universal Snap-in Hanger for 1-1/4" corrugated and LMR-1700 coaxial cable
SH-U12 SSH-12 Universal Snap-in Hanger for 1/2" corrugated, smooth wall, and LMR-600 coaxial cable
SH-U158 SSH-158 Universal Snap-in Hanger for 1-5/8" corrugated and smooth wall coaxial cable
SH-U214 206706A-5 Universal Snap-in Hanger for 2-1/4" corrugated coaxial cable
SH-U58 206706A-6 Universal Snap-in Hanger for 5/8" corrugated, smooth wall, and LMR-900 coaxial cable
SH-U78 SSH-78 Universal Snap-in Hanger for 7/8" corrugated, smooth wall, and LMR-1200 coaxial cable
TR-SK12 31771 Threaded Rod Support Kit, 3/8" x 12" long
TR-SK12-5 31771-4 Threaded Rod Support Kit, 3/8" x 12" long
TR-SK24 31771-4 Threaded rod support kit, 24", kit of 2
Appendix 7
Installation Accessories Part Number Cross Reference MTS to Andrew
MTS No. Andrew No. Description
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 51
52
TR-SK24 31771-9 Threaded Rod Support Kit, 3/8" x 24" long
TR-SK24-5 31771-6 Threaded Rod Support Kit, 3/8" x 24" long
TR-SK300m10-5 NA 10 mm Thrd Rod Sprt Kit of 5(10 mm X 300 mm)
TR-SK36 NA Threaded rod support kit of 5 (36")
TR-SK36 NA Threaded rod support kit, 36", kit of 5
TR-SK36-5 31771-10 Threaded Rod Support Kit, 3/8" x 36" long
TR-SK600m10-6 NA 10 mm Thrd Rod Sprt Kit of 5(10 mm X 600 mm)
TR-SK900m10-7 NA 10 mm Thrd Rod Sprt Kit of 5(10 mm X 900 mm)
TW15 40417 Nylon Cable ties
TW15HD NA Nylon Cable ties
UGBKIT UGBKIT Universal Ground Bar: 2-1/2" x 19-1/2", with hardware
WK-U 221213 Universal Weatherproofing Kit
Appendix 7
Installation Accessories Part Number Cross Reference MTS to Andrew
MTS No. Andrew No. Description
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 52
Worldwide Availability
ANDREW CORPORATION GLOBAL SALES
United States
Andrew Corporation
10500 W. 153rd Street
Orland Park, IL 60462 USA
Telephone: +1 (708) 349-3300
Fax: +1 (708) 349-5444
Australia
Andrew Australia
153 Barry Road
Campbellfield, Victoria
Australia 3061
Tel: +61 3 9300-7969
Fax: +61 3 9357-9110
Brazil
Andrew do Brasil Ltda.
Av. Com Camilo Julio 1256-CP 597
Zona Industrial
Sorocaba SP 18086-000 Brazil
Tel: +55 15 2102-4000
Fax: +55-15 2102-4001
Canada
Andrew Canada Inc.
606 Beech Street, West
Whitby, Ontario
Canada L1N 5S2
Tel: +1 (905) 668-3348
Fax: +1 (905) 668-8590
China
Andrew Telecom China Co. Ltd.
Beijing Branch
Units 10-12 on Level 17, Office Tower
E1,
The Towers, Oriental Plaza,
No. 1 East Chang An Avenue,
Dong Cheng District,
Beijing 100738, China
Tel: (+86-10) 8518-9608
Fax: (+86-10) 8518-9605
Andrew Telecom China Co. Ltd.
Chengdu Branch
Unit I, 8th Floor, First City Plaza
#308 Shuncheng Dajie
Chengdu 610017 China
Tel: (+86-28) 6527905
Fax:(+86-28) 6527906
Andrew Telecom China Co. Ltd.
Guangzhou Branch
Rm. 4606, Metro Plaza No. 183
Tian He Bei Lu, Tian He Qu,
Guangzhou 510620 China
Tel: (+86-20) 8755-7063/7050
Fax: (+86-20) 8755-7065
Andrew Hong Kong Ltd.
2006 ING Tower
308-320 Des Voeux Road Central
Hong Kong
Tel: +852 2515-7500
Fax: +852 2515-7599
Andrew Telecom China Co. Ltd.
1st floor, Xing Yuan Building
No. 410, Gui Ping Rd.
Cao He Jing Development Zone
Shanghai, 200233 China
Tel: (+86-21) 5464-4688
Fax: (+86-21) 5426-3220
Finland
Andrew Communication Oy
Kiilakiventie 1
FIN-90250
Oulu, Finland
Tel: +358 40-55-99-009
Fax: +358 8-5210-109
France
Andrew S.A.R.L.
28, rue Fresnel,
Z. A. Pariwest
BP 182
Coignires Cedex 78313
France
Tel: +33 1 30-05-45-50
Fax: +33 1 34-61-76-55
Germany
Andrew GmbH
Freischtzstrasse 96
81927 Munich, Germany
Tel: +49 89 99-271-100
Fax: +49 89 99-271-120
Andrew GmbH
Zur Halbinsel 3
45356 Essen, Germany
Tel: +49 201 836-0710
Fax: +49 201 836-0720
India
Andrew Telecommunications India
Private Ltd.
#D-64, Defence Colony
New Delhi 110 024 India
Tel: +91 11 2-465-4562
Fax: +91 11 2-465-4565
Andrew Telecommunications India
Private Ltd.
Plot #76, Pilerne Industrial Estate
Bardez, Goa 403511 India
Tel: +91 0 832 2407312
Fax: +91 0 832 2407314
Indonesia
Andrew Jakarta Office
Benchmartk,
The Ascott Jakarta
2 Jalan Kebon Kacang Raya
Jakarta 10230 Indonesia
Tel: +62 21 318-5821
Fax: +62 21 318-5820
Italy
Andrew SRL
Via Vittor Pisani 14
20124 Milano MI, Italy
Tel: +39 02 677-1601
Fax: +39 02 667-15262
Business Centre Parco de' Medici
Viale Castello della Magliana 38
00148 Roma, Italy
Tel. +39 06 65970277
Tel. +39 06 65970278
Fax +39 06 65970233
Japan
Andrew International Corporation
Room 305-Nagatacho TBR Bldg.
2-10-2 Nagata-cho
Chiyoda-Ku, Tokyo, Japan 100
Tel: +81 3 3581-0221
Fax: +81 3 3581-0222
Malaysia
Andrew Corporation
Level 12-03B, Plaza Masalam
2 Jalan Tengku Zabedah Ampuan
E9/E - 40100 Shah Alam
Selangor Darul Ehsan, Malaysia
Tel: +60 3 5512-6370
Fax: +60 3 5512-7324
Mexico
Andrew Corporation Mxico, SA de CV
Monte Elbruz 124 - 402A
Col. Palmitas Polanco
Mxico, D.F. 11560
Tel: +52 55 1346-1900
Fax: +52 55 1346-1901
New Zealand
Andrew New Zealand Inc.
PO Box 50-691, Porirua
Wellington 6215 New Zealand
Tel: +64 4 238-0700
Fax: +64 4 238-0701
Philippines
Andrew Philippines Inc.
Unit 907, 9th Floor
Antel 2000 Corporate Centre Building
121 Valero Street, Salcedo Village
Makati City, Manila, Philippines
Tel: +63 2 751-5170/ 887-1086
Fax: +63 2 751-5171
Russia
Andrew International Corporation
Gubkina STR 8
Moscow 117966 Russia
Tel: +7 095 748-0001
Fax: +7 095 748-0002
Saudi Arabia
Andrew Corporation
1st Floor, Al Khozama Center.
P.O. Box 53215, Riyadh 11583
Kingdom of Saudi Arabia
Tel: +966 1 465-4650 ex. 7412/7414
Fax: +966 1 465-4650 ex. 7413
Singapore
Andrew International Corporation
Singapore Representative Office
391A Orchard Road #12-01
Ngee Ann City Tower A
Singapore 238873
Tel: +65 683-85246
Fax: +65 673-89428
South Africa
Andrew Satcom Africa (Pty) Ltd.
PO Box 786117
Sandton 2146
Republic of South Africa
Tel: +27 11 719-6000
Fax: +27 11 444 5393
Spain
Andrew Espaa SA
Paseo de la Castellana, 140, 4B
28046 Madrid, Spain
Tel: +34 917 45-20-40
Fax: +34 915 64-29-85
Sweden
Andrew AB
Djursholmsvgen 30
SE-183 52 Tby, Sweden
Tel: +46 8 544-708-90
Fax: +46 8 768-37-70
Switzerland
Andrew Kommunikations Systeme AG
Bchliwis 2B - 8184 Bachenblach
Zurich, Switzerland
Tel: +41 1 863-73-73
Fax: +41 1 863-73-80
Thailand
Andrew International Holding Corporation
9 Soi Yasoob 2
Vibhavadee-Rangsit Road,
6th Floor (B) Vorasin Building,
Lardyao, Chatuchak,
Bangkok 10900, Thailand
Tel. +66 2 691-5923, 691-5925
Fax. +66 2 691-5924
United Kingdom
Andrew Ltd.
Ilex Building Mulberry Business Park
Fishponds Road Wokingham
Berkshire RG41 2GY, England
Tel: +44 118 936-6700
Fax: +44 118 936-6777
Customer Support Center
Call toll-free from
North America:
Tel: 1-800-255-1479
Fax: 1-800-349-5444
International:
Tel: +1-708-873-2307
Fax: +1-708-349-5444
United Kingdom: 0800-250055
Australia: 1800-803 219
Brazil: 0800-704-4175
New Zealand: 0800-441-747
Internet
www.andrew.com
One Company. A World of Solutions.
All designs, specifications and availabilities of products and services presented in this catalog are subject to change without notice.
CA-100351.1-EN (10/05) 2005 Andrew Corporation, Orland Park, IL 60462 USA
CA-100351.1-EN NEW SIZE.qxd 10/17/05 3:18 PM Page 54