Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Version 6.6
May 2013
Document # LTRT-65419
MediaPack Series
MP-11x & MP-124
Analog VoIP Media Gateways
Version 6.6 3 MP-11x & MP-124
User's Manual Contents
Table of Contents
1 Overview ............................................................................................................ 17
1.1 MediaPack Models ................................................................................................. 18
1.2 SIP Overview ......................................................................................................... 18
Getting Started with Initial Connectivity ................................................................21
2 Assigning the OAMP IP Address ..................................................................... 23
2.1 Web Interface ......................................................................................................... 23
2.2 BootP/TFTP Server ................................................................................................ 25
2.3 CLI .......................................................................................................................... 26
2.4 FXS Voice Menu Guidance .................................................................................... 27
Management Tools ..................................................................................................31
3 Introduction ....................................................................................................... 33
4 Web-Based Management .................................................................................. 35
4.1 Getting Acquainted with the Web Interface ............................................................ 35
4.1.1 Computer Requirements .......................................................................................... 35
4.1.2 Accessing the Web Interface ................................................................................... 36
4.1.3 Areas of the GUI ...................................................................................................... 37
4.1.4 Toolbar Description .................................................................................................. 38
4.1.5 Navigation Tree ....................................................................................................... 39
4.1.5.1 Displaying Navigation Tree in Basic and Full View ..................................39
4.1.5.2 Showing / Hiding the Navigation Pane .....................................................40
4.1.6 Working with Configuration Pages .......................................................................... 41
4.1.6.1 Accessing Pages ......................................................................................41
4.1.6.2 Viewing Parameters .................................................................................42
4.1.6.3 Modifying and Saving Parameters ...........................................................43
4.1.6.4 Working with Tables .................................................................................44
4.1.7 Searching for Configuration Parameters ................................................................. 47
4.1.8 Working with Scenarios ........................................................................................... 48
4.1.8.1 Creating a Scenario ..................................................................................48
4.1.8.2 Accessing a Scenario ...............................................................................50
4.1.8.3 Editing a Scenario ....................................................................................51
4.1.8.4 Saving a Scenario to a PC .......................................................................52
4.1.8.5 Loading a Scenario to the Device ............................................................53
4.1.8.6 Deleting a Scenario ..................................................................................53
4.1.8.7 Quitting Scenario Mode ............................................................................54
4.1.9 Creating a Login Welcome Message ....................................................................... 55
4.1.10 Getting Help ............................................................................................................. 56
4.1.11 Logging Off the Web Interface ................................................................................. 57
4.2 Viewing the Home Page ......................................................................................... 57
4.2.1 Assigning a Port Name ............................................................................................ 59
4.3 Configuring Web User Accounts ............................................................................ 60
4.3.1 Basic User Accounts Configuration ......................................................................... 61
4.3.2 Advanced User Accounts Configuration .................................................................. 63
4.4 Displaying Login Information upon Login ............................................................... 66
4.5 Configuring Web Security Settings ........................................................................ 67
4.6 Web Login Authentication using Smart Cards ....................................................... 67
User's Manual 4 Document #: LTRT-65419
MP-11x & MP-124
4.7 Configuring Web and Telnet Access List ............................................................... 68
4.8 Configuring RADIUS Settings ................................................................................ 70
5 CLI-Based Management .................................................................................... 71
5.1 Enabling CLI using Telnet ...................................................................................... 71
5.2 Enabling CLI using SSH and RSA Public Key ....................................................... 71
5.3 Establishing a CLI Session .................................................................................... 73
5.4 CLI Commands ...................................................................................................... 74
5.4.1 Status Commands ................................................................................................... 74
5.5 Ping Command ...................................................................................................... 76
5.6 Management Commands ....................................................................................... 77
5.7 Configuration Commands ...................................................................................... 77
6 SNMP-Based Management ............................................................................... 79
6.1 Configuring SNMP Community Strings .................................................................. 79
6.2 Configuring SNMP Trap Destinations .................................................................... 80
6.3 Configuring SNMP Trusted Managers ................................................................... 81
6.4 Configuring SNMP V3 Users .................................................................................. 82
7 EMS-Based Management .................................................................................. 85
8 INI File-Based Management .............................................................................. 87
8.1 INI File Format ....................................................................................................... 87
8.1.1 Configuring Individual ini File Parameters ............................................................... 87
8.1.2 Configuring Table ini File Parameters ..................................................................... 87
8.1.3 General ini File Formatting Rules ............................................................................ 89
8.2 Loading an ini File .................................................................................................. 89
8.3 Modifying an ini File ............................................................................................... 90
8.4 Secured Encoded ini File ....................................................................................... 90
General System Settings ........................................................................................91
9 Configuring Certificates ................................................................................... 93
9.1 Replacing the Device's Certificate ......................................................................... 93
9.2 Loading a Private Key ............................................................................................ 94
9.3 Mutual TLS Authentication ..................................................................................... 96
9.4 Self-Signed Certificates .......................................................................................... 97
9.5 TLS Server Certificate Expiry Check ...................................................................... 97
9.6 Configuring Certificate Revocation Checking (OCSP) ........................................... 97
9.7 Loading Certificate Chain for Trusted Root ............................................................ 98
10 Date and Time .................................................................................................... 99
10.1 Configuring Date and Time Manually ..................................................................... 99
10.2 Automatic Date and Time through SNTP Server ................................................... 99
General VoIP Configuration ..................................................................................101
11 Network ............................................................................................................ 103
11.1 Ethernet Interface Configuration .......................................................................... 103
Version 6.6 5 MP-11x & MP-124
User's Manual Contents
11.2 Configuring IP Network Interfaces ....................................................................... 103
11.2.1 Assigning NTP Services to Application Types ......................................................108
11.2.2 Multiple Interface Table Configuration Rules.........................................................109
11.2.3 Troubleshooting the Multiple Interface Table ........................................................110
11.2.4 Networking Configuration Examples .....................................................................110
11.2.4.1 One VoIP Interface for All Applications ................................................. 110
11.2.4.2 VoIP Interface per Application Type ...................................................... 111
11.2.4.3 VoIP Interfaces for Combined Application Types ................................. 112
11.2.4.4 VoIP Interfaces with Multiple Default Gateways ................................... 112
11.3 Configuring the IP Routing Table ......................................................................... 113
11.3.1 Interface Column ...................................................................................................115
11.3.2 Routing Table Configuration Summary and Guidelines ........................................115
11.3.3 Troubleshooting the Routing Table .......................................................................115
11.4 Configuring Quality of Service .............................................................................. 116
11.5 Disabling ICMP Redirect Messages ..................................................................... 118
11.6 DNS ...................................................................................................................... 118
11.6.1 Configuring the Internal DNS Table .......................................................................118
11.6.2 Configuring the Internal SRV Table .......................................................................120
11.7 Configuring NFS Settings ..................................................................................... 121
11.8 Network Address Translation Support ................................................................. 122
11.8.1 Device Located behind NAT ..................................................................................123
11.8.1.1 Configuring STUN ................................................................................. 123
11.8.1.2 Configuring a Static NAT IP Address for All Interfaces ......................... 124
11.8.2 Remote UA behind NAT ........................................................................................125
11.8.2.1 First Incoming Packet Mechanism ........................................................ 125
11.8.2.2 No-Op Packets ...................................................................................... 126
11.9 Robust Receipt of Media Streams ....................................................................... 126
11.10 Multiple Routers Support ...................................................................................... 127
11.11 IP Multicasting ...................................................................................................... 127
12 Security ............................................................................................................ 129
12.1 Configuring Firewall Settings ............................................................................... 129
12.2 Configuring 802.1x Settings ................................................................................. 133
12.3 Configuring General Security Settings ................................................................. 134
12.4 IPSec and Internet Key Exchange ....................................................................... 134
12.4.1 Enabling IPSec ......................................................................................................135
12.4.2 Configuring IP Security Proposal Table .................................................................135
12.4.3 Configuring IP Security Associations Table ...........................................................137
13 Media ................................................................................................................ 141
13.1 Configuring Voice Settings ................................................................................... 141
13.1.1 Configuring Voice Gain (Volume) Control .............................................................141
13.1.2 Silence Suppression (Compression) .....................................................................142
13.1.3 Echo Cancellation ..................................................................................................142
13.2 Fax and Modem Capabilities ................................................................................ 144
13.2.1 Fax/Modem Transport Modes ...............................................................................145
13.2.1.1 T.38 Fax Relay Mode ............................................................................ 145
13.2.1.2 G.711 Fax / Modem Transport Mode .................................................... 146
13.2.1.3 Fax Fallback .......................................................................................... 147
13.2.1.4 Fax/Modem Bypass Mode .................................................................... 147
13.2.1.5 Fax / Modem NSE Mode ....................................................................... 149
13.2.1.6 Fax / Modem Transparent with Events Mode ....................................... 150
13.2.1.7 Fax / Modem Transparent Mode ........................................................... 150
User's Manual 6 Document #: LTRT-65419
MP-11x & MP-124
13.2.1.8 RFC 2833 ANS Report upon Fax/Modem Detection ............................ 151
13.2.2 V.34 Fax Support ...................................................................................................151
13.2.2.1 Bypass Mechanism for V.34 Fax Transmission .................................... 151
13.2.2.2 Relay Mode for T.30 and V.34 Faxes ................................................... 152
13.2.3 V.152 Support ........................................................................................................152
13.2.4 Fax Transmission behind NAT ..............................................................................153
13.3 Configuring RTP/RTCP Settings .......................................................................... 154
13.3.1 Configuring the Dynamic J itter Buffer ....................................................................154
13.3.2 Comfort Noise Generation .....................................................................................155
13.3.3 Dual-Tone Multi-Frequency Signaling ...................................................................155
13.3.3.1 Configuring DTMF Transport Types ...................................................... 155
13.3.3.2 Configuring RFC 2833 Payload ............................................................ 157
13.3.4 Configuring RTP Base UDP Port ...........................................................................157
13.4 Configuring Analog Settings ................................................................................. 158
13.5 Configuring DSP Templates ................................................................................. 159
13.6 Configuring Media Security .................................................................................. 160
14 Services ........................................................................................................... 163
14.1 Least Cost Routing ............................................................................................... 163
14.1.1 Overview ................................................................................................................163
14.1.2 Configuring LCR ....................................................................................................165
14.1.2.1 Enabling the LCR Feature ..................................................................... 165
14.1.2.2 Configuring Cost Groups ....................................................................... 167
14.1.2.3 Configuring Time Bands for Cost Groups ............................................. 168
14.1.2.4 Assigning Cost Groups to Routing Rules .............................................. 170
15 Enabling Applications ..................................................................................... 171
16 Control Network .............................................................................................. 173
16.1 Configuring IP Groups .......................................................................................... 173
16.2 Configuring Proxy Sets Table .............................................................................. 176
17 SIP Definitions ................................................................................................. 181
17.1 Configuring SIP Parameters ................................................................................ 181
17.2 Configuring Account Table ................................................................................... 181
17.3 Configuring Proxy and Registration Parameters .................................................. 184
17.3.1 SIP Message Authentication Example ..................................................................185
18 Coders and Profiles ........................................................................................ 187
18.1 Configuring Coders .............................................................................................. 187
18.2 Configuring Coder Groups ................................................................................... 189
18.3 Configuring Tel Profile .......................................................................................... 190
18.4 Configuring IP Profiles ......................................................................................... 192
Gateway Application .............................................................................................197
19 Introduction ..................................................................................................... 199
20 Hunt Group ...................................................................................................... 201
20.1 Configuring Endpoint Phone Numbers ................................................................. 201
20.2 Configuring Hunt Group Settings ......................................................................... 202
Version 6.6 7 MP-11x & MP-124
User's Manual Contents
21 Manipulation .................................................................................................... 207
21.1 Configuring General Settings ............................................................................... 207
21.2 Configuring Source/Destination Number Manipulation Rules .............................. 207
21.3 Manipulating Number Prefix ................................................................................. 212
21.4 SIP Calling Name Manipulations .......................................................................... 213
21.5 Configuring Redirect Number IP to Tel ................................................................ 216
21.6 Mapping NPI/TON to SIP Phone-Context ............................................................ 218
22 Routing ............................................................................................................. 221
22.1 Configuring General Routing Parameters ............................................................ 221
22.2 Configuring Tel to IP Routing ............................................................................... 221
22.3 Configuring IP to Hunt Group Routing Table ....................................................... 228
22.4 IP Destinations Connectivity Feature ................................................................... 230
22.5 Alternative Routing for Tel-to-IP Calls .................................................................. 232
22.5.1 Alternative Routing Based on IP Connectivity .......................................................232
22.5.2 Alternative Routing Based on SIP Responses ......................................................233
22.6 Alternative Routing for IP-to-Tel Calls .................................................................. 235
22.6.1 Alternative Routing to Trunk upon Q.931 Call Release Cause Code ...................235
22.6.2 Alternative Routing to an IP Destination upon a Busy Trunk ................................236
23 Configuring DTMF and Dialing ....................................................................... 239
23.1 Dialing Plan Features ........................................................................................... 239
23.1.1 Digit Mapping .........................................................................................................239
23.1.2 External Dial Plan File ...........................................................................................240
24 Configuring Supplementary Services ........................................................... 241
24.1 Call Hold and Retrieve ......................................................................................... 243
24.2 Call Pickup ........................................................................................................... 245
24.3 Consultation Feature ............................................................................................ 245
24.4 Call Transfer ......................................................................................................... 246
24.4.1 Consultation Call Transfer .....................................................................................246
24.4.2 Blind Call Transfer .................................................................................................246
24.5 Call Forward ......................................................................................................... 246
24.5.1 Call Forward Reminder Ring .................................................................................247
24.5.2 Call Forward Reminder (Off-Hook) Special Dial Tone ..........................................248
24.5.3 Call Forward Reminder Dial Tone (Off-Hook) upon Spanish SIP Alert-Info ..........248
24.6 Call Waiting .......................................................................................................... 249
24.7 Message Waiting Indication ................................................................................. 249
24.8 Caller ID ............................................................................................................... 250
24.8.1 Caller ID Detection / Generation on the Tel Side ..................................................250
24.8.2 Debugging a Caller ID Detection on FXO ..............................................................251
24.8.3 Caller ID on the IP Side .........................................................................................251
24.9 Three-Way Conferencing ..................................................................................... 252
24.10 Emergency E911 Phone Number Services .......................................................... 254
24.10.1 Pre-empting Existing Calls for E911 IP-to-Tel Calls ..............................................254
24.11 Multilevel Precedence and Preemption ................................................................ 254
24.11.1 MLPP Preemption Events in SIP Reason Header ................................................255
24.11.2 Precedence Ring Tone ..........................................................................................256
24.12 Denial of Collect Calls .......................................................................................... 257
User's Manual 8 Document #: LTRT-65419
MP-11x & MP-124
24.13 Configuring Voice Mail ......................................................................................... 258
25 Analog Gateway .............................................................................................. 259
25.1 Configuring Keypad Features .............................................................................. 259
25.2 Configuring Metering Tones ................................................................................. 260
25.3 Configuring Charge Codes ................................................................................... 261
25.4 Configuring FXO Settings .................................................................................... 262
25.5 Configuring Authentication ................................................................................... 263
25.6 Configuring Automatic Dialing .............................................................................. 264
25.7 Configuring Caller Display Information ................................................................. 266
25.8 Configuring Call Forward ..................................................................................... 268
25.9 Configuring Caller ID Permissions ....................................................................... 269
25.10 Configuring Call Waiting ....................................................................................... 270
25.11 Rejecting Anonymous Calls ................................................................................. 271
25.12 Configuring FXS Distinctive Ringing and Call Waiting Tones per
Source/Destination Number .......................................................................................... 271
25.13 FXS/FXO Coefficient Types ................................................................................. 272
25.14 FXO Operating Modes ......................................................................................... 273
25.14.1 FXO Operations for IP-to-Tel Calls ........................................................................273
25.14.1.1 One-Stage Dialing ................................................................................. 274
25.14.1.2 Two-Stage Dialing ................................................................................. 275
25.14.1.3 DID Wink ............................................................................................... 275
25.14.2 FXO Operations for Tel-to-IP Calls ........................................................................276
25.14.2.1 Automatic Dialing .................................................................................. 276
25.14.2.2 Collecting Digits Mode........................................................................... 277
25.14.2.3 FXO Supplementary Services ............................................................... 277
25.14.3 Call Termination on FXO Devices .........................................................................278
25.14.3.1 Calls Termination by PBX ..................................................................... 278
25.14.3.2 Call Termination before Call Establishment .......................................... 279
25.14.3.3 Ring Detection Timeout ......................................................................... 279
25.15 Remote PBX Extension between FXO and FXS Devices .................................... 279
25.15.1 Dialing from Remote Extension (Phone at FXS) ...................................................280
25.15.2 Dialing from PBX Line or PSTN .............................................................................280
25.15.3 Message Waiting Indication for Remote Extensions .............................................281
25.15.4 Call Waiting for Remote Extensions ......................................................................281
25.15.5 FXS Gateway Configuration ..................................................................................282
25.15.6 FXO Gateway Configuration ..................................................................................283
Stand-Alone Survivability Application .................................................................285
26 SAS Overview .................................................................................................. 287
26.1 SAS Operating Modes ......................................................................................... 287
26.1.1 SAS Outbound Mode .............................................................................................287
26.1.1.1 Normal State ......................................................................................... 288
26.1.1.2 Emergency State ................................................................................... 288
26.1.2 SAS Redundant Mode ...........................................................................................289
26.1.2.1 Normal State ......................................................................................... 290
26.1.2.2 Emergency State ................................................................................... 290
26.1.2.3 Exiting Emergency and Returning to Normal State .............................. 290
26.2 SAS Routing ......................................................................................................... 291
26.2.1 SAS Routing in Normal State ................................................................................291
26.2.2 SAS Routing in Emergency State ..........................................................................293
Version 6.6 9 MP-11x & MP-124
User's Manual Contents
27 SAS Configuration .......................................................................................... 295
27.1 General SAS Configuration .................................................................................. 295
27.1.1 Enabling the SAS Application ................................................................................295
27.1.2 Configuring Common SAS Parameters .................................................................295
27.2 Configuring SAS Outbound Mode ........................................................................ 298
27.3 Configuring SAS Redundant Mode ...................................................................... 298
27.4 Configuring Gateway Application with SAS ......................................................... 299
27.4.1 Gateway with SAS Outbound Mode ......................................................................299
27.4.2 Gateway with SAS Redundant Mode ....................................................................301
27.5 Advanced SAS Configuration ............................................................................... 302
27.5.1 Manipulating URI user part of Incoming REGISTER .............................................302
27.5.2 Manipulating Destination Number of Incoming INVITE .........................................304
27.5.3 SAS Routing Based on IP-to-IP Routing Table .....................................................306
27.5.4 Blocking Calls from Unregistered SAS Users........................................................311
27.5.5 Configuring SAS Emergency Calls ........................................................................311
27.5.6 Adding SIP Record-Route Header to SIP INVITE .................................................312
27.5.7 Re-using TCP Connections ...................................................................................313
27.5.8 Replacing Contact Header for SIP Messages .......................................................313
27.6 Viewing Registered SAS Users ............................................................................ 314
28 SAS Cascading ................................................................................................ 315
Maintenance ...........................................................................................................317
29 Basic Maintenance .......................................................................................... 319
29.1 Resetting the Device ............................................................................................ 319
29.2 Remotely Resetting Device using SIP NOTIFY ................................................... 320
29.3 Locking and Unlocking the Device ....................................................................... 321
29.4 Saving Configuration ............................................................................................ 322
30 Resetting an Analog Channel ........................................................................ 323
31 Software Upgrade ............................................................................................ 325
31.1 Loading Auxiliary Files ......................................................................................... 325
31.1.1 Call Progress Tones File .......................................................................................327
31.1.1.1 Distinctive Ringing ................................................................................. 329
31.1.2 Prerecorded Tones File .........................................................................................331
31.1.3 Dial Plan File ..........................................................................................................332
31.1.3.1 Creating a Dial Plan File........................................................................ 332
31.1.3.2 Dialing Plans for Digit Collection ........................................................... 332
31.1.3.3 Obtaining IP Destination from Dial Plan File ......................................... 334
31.1.4 User Information File .............................................................................................335
31.1.4.1 User Information File for PBX Extensions and "Global" Numbers ........ 335
31.1.4.2 Enabling the User Info Table ................................................................. 337
31.2 Software License Key .......................................................................................... 337
31.2.1 Obtaining the Software License Key File ...............................................................338
31.2.2 Installing the Software License Key .......................................................................339
31.2.2.1 Installing Software License Key using Web Interface ........................... 339
31.2.2.2 Installing Software License Key using BootP/TFTP .............................. 340
31.3 Software Upgrade Wizard .................................................................................... 341
31.4 Backing Up and Loading Configuration File ......................................................... 344
User's Manual 10 Document #: LTRT-65419
MP-11x & MP-124
32 Automatic Update ............................................................................................ 345
32.1 BootP Request and DHCP Discovery upon Device Initialization ......................... 345
32.2 Booting using DHCP ............................................................................................ 347
32.3 Configuring Automatic Update ............................................................................. 347
32.4 Automatic Configuration Methods ........................................................................ 350
32.4.1 Local Configuration Server with BootP/TFTP ........................................................350
32.4.2 DHCP-based Configuration Server .......................................................................350
32.4.3 Configuration using DHCP Option 67 ....................................................................351
32.4.4 TFTP Configuration using DHCP Option 66 ..........................................................351
32.4.5 HTTP-based Automatic Updates ...........................................................................352
32.4.6 Configuration using FTP or NFS ...........................................................................352
32.4.7 Configuration using AudioCodes EMS ..................................................................353
32.5 Loading Files Securely (Disabling TFTP) ............................................................. 353
32.6 Remotely Triggering Auto Update using SIP NOTIFY ......................................... 354
33 Restoring Factory Defaults ............................................................................ 355
33.1 Restoring Defaults using CLI ............................................................................... 355
33.2 Restoring Defaults using Hardware Reset Button ................................................ 355
33.3 Restoring Defaults using an ini File ...................................................................... 356
Status, Performance Monitoring and Reporting .................................................357
34 System Status ................................................................................................. 359
34.1 Viewing Device Information .................................................................................. 359
34.2 Viewing Ethernet Port Information ....................................................................... 360
35 Carrier-Grade Alarms ...................................................................................... 361
35.1 Viewing Active Alarms .......................................................................................... 361
35.2 Viewing Alarm History .......................................................................................... 361
36 VoIP Status ...................................................................................................... 363
36.1 Viewing Analog Port Information .......................................................................... 363
36.2 Viewing Active IP Interfaces ................................................................................. 363
36.3 Viewing Performance Statistics ............................................................................ 364
36.4 Viewing Call Counters .......................................................................................... 364
36.5 Viewing Registered Users .................................................................................... 366
36.6 Viewing Registration Status ................................................................................. 367
36.7 Viewing Call Routing Status ................................................................................. 368
36.8 Viewing IP Connectivity ........................................................................................ 369
37 Reporting Information to External Party ....................................................... 371
37.1 RTP Control Protocol Extended Reports (RTCP XR) .......................................... 371
37.2 Generating Call Detail Records ............................................................................ 374
37.2.1 Configuring CDR Reporting ...................................................................................374
37.2.2 CDR Field Description ...........................................................................................375
37.2.2.1 CDR Fields for Gateway/IP-to-IP Application ....................................... 375
37.2.2.2 Release Reasons in CDR ..................................................................... 378
37.3 Configuring RADIUS Accounting ......................................................................... 381
37.4 Event Notification using X-Detect Header ............................................................ 384
37.5 Querying Device Channel Resources using SIP OPTIONS ................................ 386
Version 6.6 11 MP-11x & MP-124
User's Manual Contents
Diagnostics ............................................................................................................387
38 Syslog and Debug Recordings ...................................................................... 389
38.1 Syslog Message Format ...................................................................................... 389
38.1.1 Event Representation in Syslog Messages ...........................................................390
38.1.2 Identifying AudioCodes Syslog Messages using Facility Levels ...........................392
38.1.3 SNMP Alarms in Syslog Messages .......................................................................392
38.2 Configuring Syslog Settings ................................................................................. 393
38.3 Configuring Debug Recording .............................................................................. 394
38.4 Filtering Syslog Messages and Debug Recordings ............................................. 394
38.4.1 Filtering IP Network Traces ...................................................................................396
38.5 Viewing Syslog Messages ................................................................................... 398
38.6 Collecting Debug Recording Messages ............................................................... 399
39 Self-Testing ...................................................................................................... 401
40 Line Testing ..................................................................................................... 403
40.1 FXS Line Testing .................................................................................................. 403
40.2 FXO Line Testing ................................................................................................. 404
41 Testing SIP Signaling Calls ............................................................................ 405
41.1 Configuring Test Call Endpoints ........................................................................... 405
41.1.1 Starting, Stopping and Restarting Test Calls.........................................................408
41.1.2 Viewing Test Call Statistics....................................................................................409
41.2 Configuring DTMF Tones for Test Calls ............................................................... 410
41.3 Configuring Basic Test Call .................................................................................. 411
41.4 Test Call Configuration Examples ........................................................................ 412
Appendix ................................................................................................................415
42 Dialing Plan Notation for Routing and Manipulation .................................... 417
43 Configuration Parameters Reference ............................................................ 419
43.1 Networking Parameters ........................................................................................ 419
43.1.1 Ethernet Parameters ..............................................................................................419
43.1.2 Multiple VoIP Network Interfaces and VLAN Parameters .....................................419
43.1.3 Routing Parameters ...............................................................................................421
43.1.4 Quality of Service Parameters ...............................................................................422
43.1.5 NAT and STUN Parameters ..................................................................................423
43.1.6 NFS Parameters ....................................................................................................425
43.1.7 DNS Parameters ....................................................................................................426
43.1.8 DHCP Parameters .................................................................................................426
43.1.9 NTP and Daylight Saving Time Parameters ..........................................................427
43.2 Management Parameters ..................................................................................... 429
43.2.1 General Parameters ..............................................................................................429
43.2.2 Web Parameters ....................................................................................................429
43.2.3 Telnet Parameters .................................................................................................432
43.2.4 SNMP Parameters .................................................................................................433
43.2.5 Serial Parameters ..................................................................................................436
43.3 Debugging and Diagnostics Parameters .............................................................. 437
User's Manual 12 Document #: LTRT-65419
MP-11x & MP-124
43.3.1 General Parameters ..............................................................................................437
43.3.2 SIP Test Call Parameters ......................................................................................438
43.3.3 Syslog, CDR and Debug Parameters ....................................................................439
43.3.4 Resource Allocation Indication Parameters...........................................................442
43.3.5 BootP Parameters .................................................................................................443
43.4 Security Parameters ............................................................................................. 444
43.4.1 General Parameters ..............................................................................................444
43.4.2 HTTPS Parameters ...............................................................................................445
43.4.3 SRTP Parameters ..................................................................................................447
43.4.4 TLS Parameters .....................................................................................................449
43.4.5 SSH Parameters ....................................................................................................451
43.4.6 IPSec Parameters ..................................................................................................452
43.4.7 802.1X Parameters ................................................................................................454
43.4.8 OCSP Parameters .................................................................................................454
43.5 RADIUS Parameters ............................................................................................ 455
43.6 Control Network Parameters ................................................................................ 457
43.6.1 IP Group, Proxy, Registration and Authentication Parameters .............................457
43.7 General SIP Parameters ...................................................................................... 468
43.8 Coders and Profile Parameters ............................................................................ 490
43.9 Channel Parameters ............................................................................................ 494
43.9.1 Voice Parameters ..................................................................................................494
43.9.2 Coder Parameters .................................................................................................496
43.9.3 DTMF Parameters .................................................................................................496
43.9.4 RTP, RTCP and T.38 Parameters .........................................................................498
43.10 Gateway and IP-to-IP Parameters ....................................................................... 502
43.10.1 Fax and Modem Parameters .................................................................................502
43.10.2 DTMF and Hook-Flash Parameters .......................................................................508
43.10.3 Digit Collection and Dial Plan Parameters .............................................................512
43.10.4 Voice Mail Parameters ...........................................................................................514
43.10.5 Supplementary Services Parameters ....................................................................518
43.10.5.1 Caller ID Parameters ............................................................................. 518
43.10.5.2 Call Waiting Parameters ........................................................................ 522
43.10.5.3 Call Forwarding Parameters ................................................................. 524
43.10.5.4 Message Waiting Indication Parameters ............................................... 525
43.10.5.5 Call Hold Parameters ............................................................................ 527
43.10.5.6 Call Transfer Parameters ...................................................................... 528
43.10.5.7 Three-Way Conferencing Parameters .................................................. 530
43.10.5.8 MLPP and Emergency Call Parameters ............................................... 532
43.10.5.9 Call Cut-Through Parameters ............................................................... 536
43.10.5.10 Automatic Dialing Parameters ......................................................... 536
43.10.5.11 Direct Inward Dialing Parameters .................................................... 537
43.10.6 Answer and Disconnect Supervision Parameters .................................................539
43.10.7 Tone Parameters ...................................................................................................543
43.10.7.1 Telephony Tone Parameters ................................................................. 543
43.10.7.2 Tone Detection Parameters .................................................................. 546
43.10.7.3 Metering Tone Parameters ................................................................... 547
43.10.8 Telephone Keypad Sequence Parameters............................................................548
43.10.9 General FXO Parameters ......................................................................................552
43.10.10 Hunt Groups and Routing Parameters .............................................................554
43.10.11 IP Connectivity Parameters ..............................................................................559
43.10.12 Alternative Routing Parameters .......................................................................560
43.10.13 Number Manipulation Parameters ....................................................................562
43.11 Least Cost Routing Parameters ........................................................................... 567
43.12 Standalone Survivability Parameters ................................................................... 568
43.13 Auxiliary and Configuration File Name Parameters ............................................. 574
43.14 Automatic Update Parameters ............................................................................. 575
Version 6.6 13 MP-11x & MP-124
User's Manual Contents
44 DSP Templates ................................................................................................ 577
45 Selected Technical Specifications ................................................................. 579
User's Manual 14 Document #: LTRT-65419
MP-11x & MP-124
Reader's Notes
Version 6.6 15 MP-11x & MP-124
User's Manual Notices
Notice
This document describes the AudioCodes MediaPack series MP-11x and MP-124 Voice over
IP (VoIP) gateways.
Information contained in this document is believed to be accurate and reliable at the time of
printing. However, due to ongoing product improvements and revisions, AudioCodes cannot
guarantee accuracy of printed material after the Date Published nor can it accept responsibility
for errors or omissions. Before consulting this document, check the corresponding Release
Notes regarding feature preconditions and/or specific support in this release. In cases where
there are discrepancies between this document and the Release Notes, the information in the
Release Notes supersedes that in this document. Updates to this document and other
documents as well as software files can be downloaded by registered customers at
http://www.audiocodes.com/downloads.
Copyright 2013 AudioCodes Ltd. All rights reserved.
This document is subject to change without notice.
Date Published: May-06-2013
Trademarks
AudioCodes, AC, AudioCoded, Ardito, CTI2, CTI, CTI Squared, HD VoIP, HD VoIP
Sounds Better, InTouch, IPmedia, Mediant, MediaPack, NetCoder, Netrake, Nuera, Open
Solutions Network, OSN, Stretto, TrunkPack, VMAS, VoicePacketizer, VoIPerfect,
VoIPerfectHD, Whats Inside Matters, Your Gateway To VoIP and 3GX are trademarks or
registered trademarks of AudioCodes Limited. All other products or trademarks are
property of their respective owners. Product specifications are subject to change without
notice.
WEEE EU Directive
Pursuant to the WEEE EU Directive, electronic and electrical waste must not be disposed
of with unsorted waste. Please contact your local recycling authority for disposal of this
product.
Customer Support
Customer technical support and service are generally provided by AudioCodes
Distributors, Partners, and Resellers from whom the product was purchased. For technical
support for products purchased directly from AudioCodes, or for customers subscribed to
AudioCodes Customer Technical Support (ACTS), contact support@audiocodes.com.
Abbreviations and Terminology
Each abbreviation, unless widely used, is spelled out in full when first used.
Throughout this manual, unless otherwise specified, the following naming conventions are
used:
The term device refers to the MediaPack series gateways.
The term MediaPack refers to MP-124, MP-118, MP-114, and MP-112.
The term MP-11x refers to MP-118, MP-114, and MP-112.
User's Manual 16 Document #: LTRT-65419
MP-11x & MP-124
Regulatory Information
The Regulatory Information can be viewed at http://www.audiocodes.com/downloads.
Related Documentation
Manual Name
SIP CPE Release Notes
MP-11x & MP-124 SIP Installation Manual
MP-11x SIP Fast Track Guide
MP-124 AC SIP Fast Track Guide
MP-124 DC SIP Fast Track Guide
CPE Configuration Guide for IP Voice Mail
DConvert User's Guide
CPTWizard User's Guide
SNMP User's Guide
Note: The scope of this document does not fully cover security aspects for
deploying the device in your environment. Security measures should be done
in accordance with your organizations security policies. For basic security
guidelines, you should refer to AudioCodes Recommended Security
Guidelines document.
Note: Before configuring the device, ensure that it is installed correctly as instructed
in the Hardware Installation Manual.
Note: This device supports the SAS and/or Gateway / IP-to-IP applications; not the
SBC application.
Note: This device is considered an INDOOR unit and therefore must be installed
only indoors.
Legal Notice:
By default, the device supports export-grade (40-bit and 56-bit)
encryption due to US government restrictions on the export of security
technologies. To enable 128-bit and 256-bit encryption on your device,
contact your AudioCodes sales representative.
This device includes software developed by the OpenSSL Project for use
in the OpenSSL Toolkit (http://www.openssl.org/).
This device includes cryptographic software written by Eric Young
(eay@cryptsoft.com).
Version 6.6 17 MP-11x & MP-124
User's Manual 1. Overview
1 Overview
The MediaPack series
analog Voice-over-IP (VoIP) Session Initiation Protocol (SIP) media
gateways (hereafter referred to as device) are cost-effective, cutting edge technology
products. These stand-alone analog VoIP devices provide superior voice technology for
connecting legacy telephones, fax machines and Private Branch Exchange (PBX) systems
to IP-based telephony networks, as well as for integration with new IP-based PBX
architectures. These devices are designed and tested to be fully interoperable with leading
softswitches and SIP servers.
The device is best suited for small and medium-sized enterprises (SME), branch offices, or
residential media gateway solutions. The device enables users to make local or
international telephone and / or fax calls over the Internet between distributed company
offices, using their existing telephones and fax. These calls are routed over the existing
network ensuring that voice traffic uses minimum bandwidth. The device also provides SIP
trunking capabilities for Enterprises operating with multiple Internet Telephony Service
Providers (ITSP) for VoIP services.
The device supports the SIP protocol, enabling the deployment of VoIP solutions in
environments where each enterprise or residential location is provided with a simple media
gateway. This provides the enterprise with a telephone connection (i.e., RJ -11 connector)
and the capability to transmit voice and telephony signals over a packet network.
The device provides FXO and/or FXS analog ports for direct connection to an enterprise's
PBX (FXO), and / or to phones, fax machines, and modems (FXS). Depending on model,
the device can support up to 24 simultaneous VoIP calls. The device is also equipped with
a 10/100Base-TX Ethernet port for connection to the IP network. The device provides
LEDs for indicating operating status of the various interfaces.
The device is a compact unit that can be easily mounted on a desktop, wall, or in a 19-inch
rack.
The device provides a variety of management and provisioning tools, including an HTTP-
based embedded Web server, Telnet, Element Management System (EMS), and Simple
Network Management Protocol (SNMP). The user-friendly, Web interface provides remote
configuration using any standard Web browser (such as Microsoft Internet Explorer).
The figure below illustrates a typical MediaPack VoIP application.
Figure 1-1: Typical MediaPack VoIP Application
User's Manual 18 Document #: LTRT-65419
MP-11x & MP-124
1.1 MediaPack Models
The analog MediaPack 1xx models and their corresponding supported configurations are
listed in the table below:
Table 1-1: MediaPack 1xx Models and Configurations
MediaPack Model FXS FXO
Combined FXS /
FXO
Number of
Channels
MP-124 Yes No No 24
MP-118 Yes Yes 4 +4 8
MP-114 Yes Yes 2 +2 4
MP-112* Yes No No 2
* The MP-112 differs from the MP-114 and MP-118 in that its configuration excludes the
RS-232 connector, Lifeline option, and outdoor protection.
1.2 SIP Overview
Session Initiation Protocol (SIP) is an application-layer control (signaling) protocol used on
the gateway for creating, modifying, and terminating sessions with one or more
participants. These sessions can include Internet telephone calls, media announcements,
and conferences.
SIP invitations are used to create sessions and carry session descriptions that enable
participants to agree on a set of compatible media types. SIP uses elements called Proxy
servers to help route requests to the user's current location, authenticate and authorize
users for services, implement provider call-routing policies and provide features to users.
SIP also provides a registration function that enables users to upload their current locations
for use by Proxy servers. SIP implemented in the gateway, complies with the Internet
Engineering Task Force (IETF) RFC 3261 (refer to http://www.ietf.org).
The SIP call flow, shown in the figure below, describes SIP messages exchanged between
two devices during a basic call. In this call flow example, device 10.8.201.158 with phone
number 6000, dials device 10.8.201.161 with phone number 2000.
Figure 1-2: SIP Call Flow
Version 6.6 19 MP-11x & MP-124
User's Manual 1. Overview
F1 INVITE - 10.8.201.108 to 10.8.201.161:
I NVI TE si p: 2000@10. 8. 201. 161; user =phone SI P/ 2. 0
Vi a: SI P/ 2. 0/ UDP 10. 8. 201. 108; br anch=z9hG4bKacsi J kDGd
Fr om: <si p: 6000@10. 8. 201. 108>; t ag=1c5354
To: <si p: 2000@10. 8. 201. 161>
Cal l - I D: 534366556655skKw- 6000- - 2000@10. 8. 201. 108
CSeq: 18153 I NVI TE
Cont act : <si p: 8000@10. 8. 201. 108; user =phone>
User - Agent : Audi ocodes- Si p- Gat eway/ Medi aPack/ v. 6. 60. 010. 006
Suppor t ed: 100r el , em
Al l ow: REGI STER, OPTI ONS, I NVI TE, ACK, CANCEL, BYE,
NOTI FY, PRACK, REFER, I NFO
Cont ent - Type: appl i cat i on/ sdp
Cont ent - Lengt h: 208
v=0
o=Audi ocodesGW18132 74003 I N I P4 10. 8. 201. 108
s=Phone- Cal l
c=I N I P4 10. 8. 201. 108
t =0 0
m=audi o 4000 RTP/ AVP 8 96
a=r t pmap: 8 pcma/ 8000
a=r t pmap: 96 t el ephone- event / 8000
a=f mt p: 96 0- 15
a=pt i me: 20
F2 TRYING - 10.8.201.161 to 10.8.201.108:
SI P/ 2. 0 100 Tr yi ng
Vi a: SI P/ 2. 0/ UDP 10. 8. 201. 108; br anch=z9hG4bKacsi J kDGd
Fr om: <si p: 6000@10. 8. 201. 108>; t ag=1c5354
To: <si p: 2000@10. 8. 201. 161>
Cal l - I D: 534366556655skKw- 6000- - 2000@10. 8. 201. 108
Ser ver : Audi ocodes- Si p- Gat eway/ Medi aPack/ v. 6. 60. 010. 006
CSeq: 18153 I NVI TE
Cont ent - Lengt h: 0
F3 RINGING 180 - 10.8.201.161 to 10.8.201.108:
SI P/ 2. 0 180 Ri ngi ng
Vi a: SI P/ 2. 0/ UDP 10. 8. 201. 108; br anch=z9hG4bKacsi J kDGd
Fr om: <si p: 6000@10. 8. 201. 108>; t ag=1c5354
To: <si p: 2000@10. 8. 201. 161>; t ag=1c7345
Cal l - I D: 534366556655skKw- 6000- - 2000@10. 8. 201. 108
Ser ver : Audi ocodes- Si p- Gat eway/ Medi aPack/ v. 6. 60. 010. 006
CSeq: 18153 I NVI TE
Suppor t ed: 100r el , em
Cont ent - Lengt h: 0
Note: Phone 2000 answers the call and then sends a SIP 200 OK response to
device 10.8.201.108.
F4 200 OK - 10.8.201.161 to 10.8.201.108:
SI P/ 2. 0 200 OK
Vi a: SI P/ 2. 0/ UDP 10. 8. 201. 108; br anch=z9hG4bKacsi J kDGd
Fr om: <si p: 6000@10. 8. 201. 108>; t ag=1c5354
To: <si p: 2000@10. 8. 201. 161>; t ag=1c7345
Cal l - I D: 534366556655skKw- 6000- - 2000@10. 8. 201. 108
CSeq: 18153 I NVI TE
User's Manual 20 Document #: LTRT-65419
MP-11x & MP-124
Cont act : <si p: 2000@10. 8. 201. 161; user =phone>
Ser ver : Audi ocodes- Si p- Gat eway/ Medi aPack/ v. 6. 60. 010. 006
Suppor t ed: 100r el , em
Al l ow: REGI STER, OPTI ONS, I NVI TE, ACK, CANCEL, BYE,
NOTI FY, PRACK, REFER, I NFO
Cont ent - Type: appl i cat i on/ sdp
Cont ent - Lengt h: 206
v=0
o=Audi ocodesGW30221 87035 I N I P4 10. 8. 201. 161
s=Phone- Cal l
c=I N I P4 10. 8. 201. 10
t =0 0
m=audi o 7210 RTP/ AVP 8 96
a=r t pmap: 8 pcma/ 8000
a=pt i me: 20
a=r t pmap: 96 t el ephone- event / 8000
a=f mt p: 96 0- 15
F5 ACK - 10.8.201.108 to 10.8.201.10:
ACK si p: 2000@10. 8. 201. 161; user =phone SI P/ 2. 0
Vi a: SI P/ 2. 0/ UDP 10. 8. 201. 108; br anch=z9hG4bKacZYpJ WxZ
Fr om: <si p: 6000@10. 8. 201. 108>; t ag=1c5354
To: <si p: 2000@10. 8. 201. 161>; t ag=1c7345
Cal l - I D: 534366556655skKw- 6000- - 2000@10. 8. 201. 108
User - Agent : Audi ocodes- Si p- Gat eway/ Medi aPack/ v. 6. 60. 010. 006
CSeq: 18153 ACK
Suppor t ed: 100r el , em
Cont ent - Lengt h: 0
Note: Phone 6000 goes on-hook and device 10.8.201.108 sends a BYE to device
10.8.201.161 and a voice path is established.
F6 BYE - 10.8.201.108 to 10.8.201.10:
BYE si p: 2000@10. 8. 201. 161; user =phone SI P/ 2. 0
Vi a: SI P/ 2. 0/ UDP 10. 8. 201. 108; br anch=z9hG4bKacRKCVBud
Fr om: <si p: 6000@10. 8. 201. 108>; t ag=1c5354
To: <si p: 2000@10. 8. 201. 161>; t ag=1c7345
Cal l - I D: 534366556655skKw- 6000- - 2000@10. 8. 201. 108
User - Agent : Audi ocodes- Si p- Gat eway/ Medi aPack/ v. 6. 60. 010. 006
CSeq: 18154 BYE
Suppor t ed: 100r el , em
Cont ent - Lengt h: 0
F7 OK 200 - 10.8.201.10 to 10.8.201.108:
SI P/ 2. 0 200 OK
Vi a: SI P/ 2. 0/ UDP 10. 8. 201. 108; br anch=z9hG4bKacRKCVBud
Fr om: <si p: 6000@10. 8. 201. 108>; t ag=1c5354
To: <si p: 2000@10. 8. 201. 161>; t ag=1c7345
Cal l - I D: 534366556655skKw- 6000- - 2000@10. 8. 201. 108
Ser ver : Audi ocodes- Si p- Gat eway/ Medi aPack/ v. 6. 60. 010. 006
CSeq: 18154 BYE
Suppor t ed: 100r el , em
Cont ent - Lengt h: 0
Part I
Getting Started with Initial
Connectivity
Version 6.6 23 MP-11x & MP-124
User's Manual 2. Assigning the OAMP IP Address
2 Assigning the OAMP IP Address
The device is shipped with a factory default IP address for its operations, administration,
maintenance, and provisioning (OAMP) interface, as shown in the table below:
Table 2-1: Default OAMP IP Address
IP Address Value
IP Address
FXS and FXS / FXO devices: 10.1.10.10
FXO device: 10.1.10.11
Note: FXO interfaces are applicable only to MP-11x series devices.
Subnet Mask 255.255.0.0
Default Gateway IP
Address
0.0.0.0
The default IP address can be used for initially accessing the device, using any of its
management tools (i.e., embedded Web server, EMS, or Telnet). Once accessed, you can
change this default IP address to correspond with your networking scheme in which the
device is deployed. After changing the IP address, you can re-access the device with this
new OAMP IP address and start configuring and managing the device as desired.
This section describes the different methods for changing the device's default IP address to
suit your networking environment:
Embedded command line interface (CLI) - see 'CLI' on page 26
Embedded HTTP/S-based Web server - see 'Web Interface' on page 23
Bootstrap Protocol (BootP) - see BootP/TFTP Server on page 25
FXS telephone voice menu - see FXS Voice Menu Guidance on page 27
2.1 Web Interface
The procedure below describes how to assign an OAMP IP address using the Web
interface.
To assign an OAMP IP address using the Web interface:
1. Disconnect the network cables (if connected) from the device.
2. Connect the Ethernet port located on the rear panel (labeled Ethernet) directly to the
network interface of your computer, using a straight-through Ethernet cable.
Figure 2-1: MP-11x Ethernet Connection to PC for Initial Connectivity
User's Manual 24 Document #: LTRT-65419
MP-11x & MP-124
Figure 2-2: MP-124 Ethernet Connection to PC for Initial Connectivity
3. Change the IP address and subnet mask of your computer to correspond with the
default IP address and subnet mask of the device.
4. Access the Web interface:
a. On your computer, start a Web browser and in the URL address field, enter the
default IP address of the device; the Web interface's Login screen appears:
Figure 2-3: Web Login Screen
b. In the 'Username' and 'Password' fields, enter the default login user name
("Admin" - case-sensitive) and password ("Admin" - case-sensitive), and then
click Login; the device's Web interface is accessed.
5. Change the default IP address to one that corresponds with your network:
a. Open the Multiple Interface Table page (Configuration tab >VoIP menu >
Network submenu >IP Settings).
Figure 2-4: IP Settings Page (Single Network Interface)
b. Select the 'Index' radio button corresponding to the "OAMP +Media +Control"
application type, and then click Edit.
Version 6.6 25 MP-11x & MP-124
User's Manual 2. Assigning the OAMP IP Address
c. Change the IP address, subnet mask, and Default Gateway IP address to
correspond with your network IP addressing scheme.
d. Click Apply, and then click Done to validate your settings.
6. Save your settings to the flash memory with a device reset (see Resetting the Device
on page 319).
7. Disconnect the computer from the device and then reconnect the device to your
network.
2.2 BootP/TFTP Server
You can assign an IP address to the device using BootP/TFTP protocols. This can be done
using the AudioCodes AcBootP utility (supplied) or any standard compatible BootP server.
Note: You can also use the AcBootP utility to load the software file (.cmp) and
configuration file (.ini). For a detailed description of the AcBootP utility, refer
to AcBootP Utility User's Guide.
To assign an IP address using BootP/TFTP:
1. Start the AcBootP utility.
2. Select the Preferences tab, and then set the 'Timeout' field to "50".
3. Select the Client Configuration tab, and then click the Add New Client button.
Figure 2-5: BootP Client Configuration Screen
4. Configure the following fields:
Client MAC: Enter the device's MAC address. The MAC address is printed on
the label located on the underside of the device. Ensure that the check box to the
right of the field is selected in order to enable the client.
'Client IP: Enter the new IP address (in dotted-decimal notation) that you want to
assign the device.
User's Manual 26 Document #: LTRT-65419
MP-11x & MP-124
Subnet: Enter the new subnet mask (in dotted-decimal notation) that you want to
assign the device.
Gateway: Enter the IP address of the Default Gateway (if required).
5. Click Apply to save the new client.
6. Physically reset the device by powering it down and then up again. This enables the
device to receive its new networking parameters through the BootP process.
2.3 CLI
The procedure below describes how to assign an OAMP IP address, using CLI.
Note: Assigning an IP address using CLI is not applicable to MP-112 as this model
does not provide RS-232 serial interface.
To assign an OAMP IP address using CLI:
1. Connect the RS-232 port of the device to the serial communication port on your
computer. For more information, refer to the Hardware Installation Manual.
Figure 2-6: MP-11x Serial Connection with PC for CLI Communication
Figure 2-7: MP-124 Serial Connection with PC for CLI Communication
2. Establish serial communication with the device using a terminal emulator program
(such as HyperTerminal) with the following communication port settings:
Baud Rate: 115,200 bps for MP-124 and 9,600 bps for MP-11x
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Version 6.6 27 MP-11x & MP-124
User's Manual 2. Assigning the OAMP IP Address
3. At the prompt, type the following command to access the configuration folder, and
then press Enter:
conf
4. At the prompt, type the following command to view the current network settings, and
then press Enter:
GCP IP
5. At the prompt, typing the following command to change the network settings, and then
press Enter:
SCP IP <ip_address><subnet_mask><default_gateway>
You must enter all three network parameters, each separated by a space, for
example:
SCP IP 10.13.77.7 255.255.0.0 10.13.0.1
6. At the prompt, type the following command to save the settings and reset the device,
and then press Enter:
SAR
2.4 FXS Voice Menu Guidance
You can assign an IP address that suits your networking scheme using a standard touch-
tone telephone connected to one of the FXS ports. The FXS voice menu can also be used
to query and modify basic configuration parameters.
Notes: If you want to disable the FXS voice menu, do one of the following:
Set the VoiceMenuPassword parameter to 'disable'.
Change the Web login password for the Admin user from its default value
(i.e., "Admin") to any other value, and then reset the device.
To assign an IP address using the voice menu:
1. Connect a telephone to one of the FXS ports.
2. Lift the handset and dial ***12345 (three stars followed by the digits 1, 2, 3, 4, and 5).
3. Wait for the 'configuration menu' voice prompt to be played.
4. To change the IP address:
a. Press 1 followed by the pound key (#); the current IP address of the device is
played.
b. Press the # key.
c. Dial the new IP address, using the star (*) key instead of periods (.), e.g.,
192*168*0*4, and then press # to finish.
d. Review the new IP address, and then press 1 to save.
5. To change the subnet mask:
a. Press 2 followed by the # key; the current subnet mask of the device is played.
b. Press the # key.
c. Dial the new subnet mask (e.g., 255*255*0*0), and then press # to finish.
d. Review the new subnet mask, and then press 1 to save.
6. To change the Default Gateway IP address:
a. Press 3 followed by the # key; the current Default Gateway address is played.
b. Press the # key.
User's Manual 28 Document #: LTRT-65419
MP-11x & MP-124
c. Dial the new Default Gateway address (e.g., 192*168*0*1), and then press # to
finish.
d. Review the new Default Gateway address, and then press 1 to save.
7. Hang up (on-hook) the handset.
Alternatively, initial configuration may be performed using an HTTP server. The Voice
Menu may be used to specify the configuration URL.
To set a configuration URL:
1. Obtain the IP address of the configuration HTTP server (e.g., 36.44.0.6).
2. Connect a telephone to one of the FXS ports.
3. Lift the handset and dial ***12345 (three stars followed by the digits 1, 2, 3, 4, and 5).
4. Wait for the "configuration menu" voice prompt to be played.
5. Dial 31 followed by the # key; the current IP address is played.
6. To change the IP address:
a. Press the # key.
b. Dial the configuration server's IP address. Use the star (*) key instead of dots
("."), e.g., 36*44*0*6, and then press # to finish.
c. Review the configuration server's IP address, and then press 1 to save.
7. Dial 32 followed by the # key, and then do the following to change the configuration
file name pattern:
a. Press the # key.
b. Select one of the patterns listed in the table below (aa.bb.cc.dd denotes the IP
address of the configuration server):
# Configuration File Name Pattern Description
1 http://aa.bb.cc.dd/config.ini Standard config.ini.
2 https://aa.bb.cc.dd/config.ini Secure HTTP.
3 http://aa.bb.cc.dd/audiocodes/<MAC>.ini
The device's MAC address is appended to the file
name (e.g.,
http://36.44.0.6/audiocodes/00908f012300.ini).
4 http://aa.bb.cc.dd:8080/config.ini HTTP on port 8080.
5 http://aa.bb.cc.dd:1400/config.ini HTTP on port 1400.
6
http://aa.bb.cc.dd/cgi-
bin/acconfig.cgi?mac=<MAC>&ip=<IP>
Generating configuration per IP/MAC address
dynamically, using a CGI script. See perl example
below.
a. Press the selected pattern code, and then press # to finish.
8. Press 1 to save, and then hang up the handset. The device retrieves the configuration
from the HTTP server.
The following is an example perl CGI script, suitable for most Apache-based HTTP servers
for generating configuration dynamically per pattern #6 above. Copy this script to
/var/www/cgi-bin/acconfig.cgi on your Apache server and edit it as required:
#! / usr / bi n/ per l
use CGI ;
$quer y = new CGI ;
$mac = $quer y- >par am( ' mac' ) ;
$i p = $quer y- >par am( ' i p' ) ;
pr i nt " Cont ent - t ype: t ext / pl ai n\ n\ n" ;
pr i nt " ; I NI f i l e gener at or CGI \ n" ;
Version 6.6 29 MP-11x & MP-124
User's Manual 2. Assigning the OAMP IP Address
pr i nt " ; Request f or MAC=$mac I P=$i p\ n\ n" ;
pr i nt <<" EOF" ;
Sysl ogSer ver I P = 36. 44. 0. 15
Enabl eSysl og = 1
SSHSer ver Enabl e = 1
EOF
The table below lists the configuration parameters that can be viewed and modified using
the voice menu:
Table 2-2: Voice Menu Configuration Parameters
Item Number at
Menu Prompt
Description
1 IP address.
2 Subnet mask.
3 Default Gateway IP address.
4 Primary DNS server IP address.
7 DHCP enable / disable.
31 Configuration server IP address.
32 Configuration file name pattern.
99
Voice menu password (initially 12345).
Note: The voice menu password can also be changed using the Web interface
or ini file parameter VoiceMenuPassword.
User's Manual 30 Document #: LTRT-65419
MP-11x & MP-124
Reader's Notes
Part II
Management Tools
Version 6.6 33 MP-11x & MP-124
User's Manual 3. Introduction
3 Introduction
This part provides an overview of the various management tools that can be used to
configure the device. It also provides step-by-step procedures on how to configure the
management settings.
The following management tools can be used to configure the device:
Embedded HTTP/S-based Web server - see 'Web-based Management' on page 35
Command Line Interface (CLI) - see 'CLI-Based Management' on page 71
AudioCodes Element Management System - see EMS-Based Management on page
85
Simple Network Management Protocol (SNMP) browser software - see 'SNMP-Based
Management' on page 79
Configuration ini file - see 'INI File-Based Management' on page 87
Notes:
Some configuration settings can only be done using a specific
management tool. For example, some configuration can only be done
using the Configuration ini file method.
Throughout this manual, where a parameter is mentioned, its
corresponding Web, CLI, and ini parameter is mentioned. The ini file
parameters are enclosed in square brackets [...].
For a list and description of all the configuration parameters, see
'Configuration Parameters Reference' on page 419.
User's Manual 34 Document #: LTRT-65419
MP-11x & MP-124
Reader's Notes
Version 6.6 35 MP-11x & MP-124
User's Manual 4. Web-Based Management
4 Web-Based Management
The device provides an embedded Web server (hereafter referred to as Web interface),
supporting fault management, configuration, accounting, performance, and security
(FCAPS), including the following:
Full configuration
Software and configuration upgrades
Loading auxiliary files, for example, the Call Progress Tones file
Real-time, online monitoring of the device, including display of alarms and their
severity
Performance monitoring of voice calls and various traffic parameters
The Web interface provides a user-friendly, graphical user interface (GUI), which can be
accessed using any standard Web browser (e.g., Microsoft Internet Explorer).
Access to the Web interface is controlled by various security mechanisms such as login
user name and password, read-write privileges, and limiting access to specific IP
addresses.
Notes:
The Web interface allows you to configure most of the device's settings.
However, additional configuration parameters may exist that are not
available in the Web interface and which can only be configured using
other management tools.
Some Web interface pages and/or parameters are available only for
certain hardware configurations or software features. The software
features are determined by the installed Software License Key (see
'Software License Key' on page 337).
4.1 Getting Acquainted with the Web Interface
This section provides a description of the Web interface.
4.1.1 Computer Requirements
The client computer requires the following to work with the Web interface of the device:
A network connection to the device
One of the following Web browsers:
Microsoft Internet Explorer (Version 6.0 and later)
Mozilla Firefox