0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
17 visualizzazioni36 pagine
ACTIX is a post-processing tool for GSM, GPRS, UMTS, CDMA-one, CDMA2000 and IS-95. It provides users the ability to manage, visualize, replay, analyze and optimise networks based on collected data.
ACTIX is a post-processing tool for GSM, GPRS, UMTS, CDMA-one, CDMA2000 and IS-95. It provides users the ability to manage, visualize, replay, analyze and optimise networks based on collected data.
ACTIX is a post-processing tool for GSM, GPRS, UMTS, CDMA-one, CDMA2000 and IS-95. It provides users the ability to manage, visualize, replay, analyze and optimise networks based on collected data.
Actix Module 2 All rights reserved 2002, Alcatel ACTIXRVS WHAT IS ACTIX ?: Apost-processing tool for GSM, GPRS, UMTS, CDMA-one, CDMA2000 and IS-95. WHAT I CAN DO WITH ACTIX ?: Actix provides users the ability to manage, visualize, replay, analyze and optimize networks based on collected data. WHERE I CAN USE ACTIX ? Actix A-RVS( Rollout Verification Solution) module will be used to troubleshoot and optimise UMTS networks. WHY ACTIX? ACTIX, as a network optimization platform, is a powerful tool that will allow you to discover, locate, manage, troubleshoot and find solutions of your network problem. You just have to know what you are looking for. Actix Module 3 All rights reserved 2002, Alcatel OVERVIEW 1. INSTALL ACTIX 2. CONFIGURE ACTIX 3. MENU ACTIX 4. USE ACTIX 5. OPTIMIZATION Actix Module 4 All rights reserved 2002, Alcatel 1- INSTALL (ACTIX SET-UP) HW: One Dongle (USB or parallel) Or a license server SW: One CD with the installation kit. One lservrc.lic file Actix Module 5 All rights reserved 2002, Alcatel OVERVIEW 1. INSTALL ACTIX 2. CONFIGURE ACTIX 1. LOAD TRACE 2. LOAD MAPS 3. LOAD SITE DB 3. MENU ACTIX 4. USE ACTIX 5. OPTIMIZATION Actix Module 6 All rights reserved 2002, Alcatel 2-CONFIGURE ACTIX Input files: Data: sd5(Nitro file), cait, mdm, txt, mdb and others. Maps: tab, wor, gst(MapInfo), atr(tiled rasters) Site database: cellrefs.txt Actix Workspace: Actix Module 7 All rights reserved 2002, Alcatel 2.1-CONFIGURE ACTIX - LOAD TRACES (1/2) > Several traces can be loaded and monitored simultaneously. > Each of your loaded trace should contain 3 major folders of parameters(even more if you have used 2-3 mobiles to collect traces): Sd5_Survey Samsung 3GPP_1 Samsung 3GPP_2 E6455C( IMT2000 receiver) Actix Module 8 All rights reserved 2002, Alcatel 2.1-CONFIGURE ACTIX - LOAD TRACES (2/2) > Superstream can be created: Tools>Create Superstream > After loading all the files your workspace looks like this: 2 measurements. Superstream Actix Module 9 All rights reserved 2002, Alcatel 2.2- CONFIGURE ACTIX - LOAD MAPS (1/2) Step1.Display a parameter (mobile scanner or independent) that you would like to monitor(right click on parameter and choose display on map option): Step2. Click on the layers button. step1 step1 step2 step2 > Step 3. Like Mapinfo you can play with your layers,add layers more,reorder,export etc step3 step3 Actix Module 10 All rights reserved 2002, Alcatel 2.2-CONFIGURE ACTIX - LOAD MAPS (2/2) > Right click on the map window and you may choose among one of the following menus: Actix Module 11 All rights reserved 2002, Alcatel 2.3- CONFIGURE ACTIX -LOAD SITE DB. > The Site file is a txt file. He must be in a special format in order to load it each time you open ACTIX. Should be updated often Should be updated often Actix Module 12 All rights reserved 2002, Alcatel OVERVIEW 1. INSTALL ACTIX 2. CONFIGURE ACTIX 3. MENU ACTIX 1. File 2. View 3. Analysis 4. Network Image 5. Workbook 6. Cells 7. Tools 4. USE ACTIX 5. OPTIMIZATION Actix Module 13 All rights reserved 2002, Alcatel 3.1-USE ACTIX-MENU-File > New workspace: to create a new workspace > Open Workspace: open a previous workspace > Save Workspace: save the current work as a workspace > Save Workspace as: save current workspace with another name. > Open logfile: open a trace data > Close All Logfiles: Close all traces data. > Import text file: Import a txt file with a specific format > Export text file: Export a loaded file in txt format Actix Module 14 All rights reserved 2002, Alcatel > Screen layout: Save/Open screen layout. > Display message browser: browse all message of one device.(not describe here). > Display New Map: Will open an empty Map window. > Display on Map: display parameter on a map > Display on Chart:display parameter on a chart > Display on Table: display parameter on a table > Display on Workbook: display parameter on a workbook > Display Attribute explorer :Display cell data in a table. > Forms: Pre-configured panels used to visualize specific information at any point in the drive test. > Protocol Stack: Display RRC and NAS message. > Static Explorer:Several analysis about neighbor list 3.2-USE ACTIX-MENU-View Actix Module 15 All rights reserved 2002, Alcatel > UMTS Data Event Navigator: PDP activ,deactiv,GPRS attach,GPRS RAU > UMTS Data Session:instant throughput in UL and DL > UMTS Throughput: graph throughput during the call > UMTS Top 10 Scan Measurements:SC,Ec/Io and RSCP of top 10 > UMTS UE Active+Monitored Set:same data for 3 SC from active set and 5 SC from Monitored set > UMTS UE Call Information:instant values IMSI, caller ID, calling ID, call sate, LAC RAC You can create your own form 3.2-USE ACTIX-MENU-View-Forms >>Pre Pre- -configured panels used to visualize information configured panels used to visualize information >>Pre Pre- -configured panels used to visualize information configured panels used to visualize information Actix Module 16 All rights reserved 2002, Alcatel 3.2-USE ACTIX-MENU-View- Protocol Stack > Protocol Stack-Uu RRC RRC and layer 3 messages and details. VERY IMPORTANT WINDOW ! VERY IMPORTANT WINDOW ! Actix Module 17 All rights reserved 2002, Alcatel 3.2-USE ACTIX-MENU-View-Statistic Explorer 1/2 According to the type of device selected, following analysis are available: -UMTS Call Setup Analysis: Failed and good calls. -UMTS Call Statistics:Failed Setup,Dropped Calls, Succes Calls, RRC to setup, RRC to Setup Complete,RRC to Call, Average time MR to ASU, average time between ASU, call duration. All of them site by site -UMTS CPICH Level Analysis:AvgEc/Io,AvgRSCP, Dropped Calls, Failed Setups, Successful Calls. All of them site by site -UMTS Drive test Summary: idem CPICH Level -Call Setup Failure Analysis:Last1stBest servingSC, 5sec Avg 1stBest Ec/Io,5sec Avg 1 st best RSCP, 5 sec Avg UE TX Power, Saw Setup Msg in Time,Due to RRC Connection reject,RRC Connection release beofre Call setup, disconnect Cause, RRC Release Cause,Due to Pillot Polution, Due to Interference, Due to Poor DL Coverage, Due to Poor UL Coverage, Due to Coverage Limitation, Due to Missing Neighbor -Dropped Call Analysis : CSF CD . -BLER 3 seconds before AS Update:Per call and per node B: Max Aggr BLER, Min Aggr BLER, Avg Aggr BLER -BLER 3 seconds after AS update: idem -Data Build Verification: see the param of a cell related to cell reselection:Cell resel Max Ul TX Pw, Cell SelResel reselect S, Cell reselect Hyst1, Qualmin, RxLevMin,search HCS,CPICH Ec/Io Hyst 2, 1 st Intrasearch, 1 st Intersearch, ASU Max Allowed UL TX Power, Acces Class Barred,cell barred etc. -LAU+RAU Analysis per Site/Sector: Avg LAU Duration, LAU Success, LAU Fail, RAU Succes, RAU FAil -LAU+RAU Analysis Total: idem but summed from all cells -UMTS Handoff Analysis:per site/sector/call : Avg Ec/Io, Avg RSCP, Failed ASU, Successful ASUs,Dropped Calls, Failed Setups, Successful Calls -UMTS Quality Analysis: Avg BLER,Avg Ec/Io, Avg RSCP, Dropped Calls, Failed Setups, Successful Calls Actix Module 18 All rights reserved 2002, Alcatel 3.2- USE ACTIX-MENU-View-Statistic Explorer 2/2 You can select from scanner or from mobile: You can define your own statistic as a query. Not see in this presentation. Actix Module 19 All rights reserved 2002, Alcatel 3.3- USE ACTIX-MENU-Analysis -UMTS Drive Test Summary:strongest Ec/Io. Strongest RSCP etc -UMTS CPICH Level Analysis:in call, before call drop, after call drop, before RRC Connection Request. -UMTS Call Statistics: Call statistics, Call Sustainability and Call Timers Analysis -UMTS Call Setup Analysis:Call Setup Status and Call Sequence Analysis -UMTS Handoff Analysis: Handoff state Analysis and SHO Performance -UMTS Quality Analysis: Overall BLER, BLER per call, BLER during SHO -UMTS Accelerated Network Rollout:Handoff Analysis, Pilot Pollution Analysis and Neighbor List Recommendations You can define your own analysis as a query. Not see in this presentation You can define your own analysis as a query. Not see in this presentation. You can define your own analysis as a query. Not see in this presentation You can define your own analysis as a query. Not see in this presentation. Actix Module 20 All rights reserved 2002, Alcatel 3.5- USE ACTIX-MENU-Workbook 3.6- USE ACTIX-MENU-Cells > Open Report/Workbook: You can add a predefined report( made by you not in the package delivered by Actix) for example the one that we are currently using for site verification report. The report It is usually an Excel file and requires special *.caf files in order to run. To see in this training. > Cells: Get all the data you need about sites and cells:LAC, CID, EIRP,BSIC,SC etc Change CellRef file Actix Module 21 All rights reserved 2002, Alcatel 3.7- USE ACTIX-MENU-Tools Analysis Manager: To define your analysis and reports. Not in this presentation. Create Superstream: Already seen what this means Choose Scenario: It is for other modules of ACTIX not for RVS Custom Attribute Manager: Launch custom attribute Display Event Diagram Viewer:important for mobile state(idle,connected etc) Display Thresholds:edit thresholds for all alarms Find Attribute: you can easily locate parameter(s) State forms Editor: generate your own forms Superstream PCMlink/DT:not used Preferences: MOST IMPORTANT ONE! Actix Module 22 All rights reserved 2002, Alcatel 3.7- USE ACTIX-MENU-Tools-Analysis Manager Define New analysis Or edit existing Not detail in this presentation. Not detail in this presentation. Actix Module 23 All rights reserved 2002, Alcatel 3.7- USE ACTIX-MENU-Tools-custom Attribute Manager & Event Diagram > Custom Attribute Manager This window will pop-up when custom attribute will be created. *.caf file for each of this Attribute to be placed in C:\Program Files\Actix\Analyzer\Bin\Custom Attributes. > Event Diagram Shows mobile states (idle, connected, etc) Actix Module 24 All rights reserved 2002, Alcatel 3.7-USE ACTIX-MENU-Tools-Thresholds & Preferences > Thresholds : You can edit or find out what each threshold means(used to generate events,analyses and statistiques): > Preferences : Put your option for display and analyses. VERY IMPORTANT WINDOW VERY IMPORTANT WINDOW Actix Module 25 All rights reserved 2002, Alcatel OVERVIEW 1. INSTALL ACTIX 2. CONFIGURE ACTIX 3. MENU ACTIX 4. USE ACTIX 1. DISPLAY PARAMETERS 2. DISPLAY EVENTS 3. CORRELATE WINDOWS & REPLAY MEASUREMENTS 4. TABLE, WORKBOOKS, GRAPHS, CHARTS 5. FAVORITE 6. SAVING YOUR WORK AND YOUR SETTINGS 5. OPTIMIZATION Actix Module 26 All rights reserved 2002, Alcatel 4.1-USE ACTIX-Display parameters DISPLAY PARAMETERS: You should ask questions -Scanner or Mobile? -UL or DL? -When and Why occurred? -To whom it was addressed? -Who sent the message? -Why was sent? -CCH or DCH? -Parameter or Event? -Key parameters of the message? -On RRC? Actix Module 27 All rights reserved 2002, Alcatel 4.2-USE ACTIX-Display events Events are triggered by measurements or by higher layers(UTRAN or NAS messages) - -events triggered by measurements events triggered by measurements: : type1(intra type1(intra- -frequency) frequency) ype2(inter ype2(inter- -frequency) frequency) type3(inter RAT) type3(inter RAT) type4 traffic( FACH to DCH) type4 traffic( FACH to DCH) type5 type5 type6 (UE internal measurements: RX type6 (UE internal measurements: RX- -TX time TX time difference for outer loop power control, power difference for outer loop power control, power balancing measurements balancing measurements) - -events triggered by measurements events triggered by measurements: : type1(intra type1(intra- -frequency) frequency) ype2(inter ype2(inter- -frequency) frequency) type3(inter RAT) type3(inter RAT) type4 traffic( FACH to DCH) type4 traffic( FACH to DCH) type5 type5 type6 (UE internal measurements: RX type6 (UE internal measurements: RX- -TX time TX time difference for outer loop power control, power difference for outer loop power control, power balancing measurements balancing measurements) - -events triggered by higher layers events triggered by higher layers: : The event pdp context activation successful for The event pdp context activation successful for example of the session management of Layer 3 is example of the session management of Layer 3 is transmitted over the air interface by a DL_DCCH transmitted over the air interface by a DL_DCCH message Downlink direct transfer with all the message Downlink direct transfer with all the parameters requested for the transfer: parameters requested for the transfer: throughput in UL and DL, min and max, BLER ,SDU, throughput in UL and DL, min and max, BLER ,SDU, PDU, peak values etc. PDU, peak values etc. - -events triggered by higher layers events triggered by higher layers: : The event pdp context activation successful for The event pdp context activation successful for example of the session management of Layer 3 is example of the session management of Layer 3 is transmitted over the air interface by a DL_DCCH transmitted over the air interface by a DL_DCCH message Downlink direct transfer with all the message Downlink direct transfer with all the parameters requested for the transfer: parameters requested for the transfer: throughput in UL and DL, min and max, BLER ,SDU, throughput in UL and DL, min and max, BLER ,SDU, PDU, peak values etc. PDU, peak values etc. - -always follow the mobile state always follow the mobile state: : idle, connected etc and also the call steps: idle, connected etc and also the call steps: RRC Con Req.,RRC Con. setup,RRC Con setup complete,service request, service accepted, RRC Con Req.,RRC Con. setup,RRC Con setup complete,service request, service accepted, authentication request, authentication accepted, security command, security complete, CC setup, authentication request, authentication accepted, security command, security complete, CC setup, CC call proceed, RB setup, RB setup complete, CC alert, CC Connect. CC call proceed, RB setup, RB setup complete, CC alert, CC Connect. - -always follow the mobile state always follow the mobile state: : idle, connected etc and also the call steps: idle, connected etc and also the call steps: RRC Con Req.,RRC Con. setup,RRC Con setup complete,service request, service accepted, RRC Con Req.,RRC Con. setup,RRC Con setup complete,service request, service accepted, authentication request, authentication accepted, security command, security complete, CC setup, authentication request, authentication accepted, security command, security complete, CC setup, CC call proceed, RB setup, RB setup complete, CC alert, CC Connect. CC call proceed, RB setup, RB setup complete, CC alert, CC Connect. Actix Module 28 All rights reserved 2002, Alcatel 4.3-USE ACTIX-TABLES Parameter(s) can be displayed on a table: Step1: Select parameter Step2:right click on it Step3: display on table Step4: select next parameter Step5: drag&drop it on the same table Step6: and so on.. Available sheets: Series,histograms and statistics Can NOT be saved as Excel but for this There is another feature as presented on the next slide Actix Module 29 All rights reserved 2002, Alcatel 4.4-USE ACTIX-WORKBOOKS (6/11) Parameter(s) can be displayed on a WORKBOOK: Step1: Select parameter Step 2:right click on it Step3: display on workbook (An Excel workbook will be opened) Step4: select next parameter Step5: right click on it Step6:display on workbook(active) Step7: and so on.. Available sheets:Series,histograms and statistics. Also graphs&charts can be created like in any Excel workbook Actix Module 30 All rights reserved 2002, Alcatel 4.4-USE ACTIX-CHARTS Parameter(s) can be displayed on a chart: Step1: Select parameter Step 2: right click on it Step3: display on chart Step4: select next parameter Step5: drag&drop it on the table Step6: and so on.. Actix Module 31 All rights reserved 2002, Alcatel 4.4-PREDEFINED REPORTS AND FAVORITES > Favorites: we already discussed about forms, analysis, states Another trick that you will probably use is: monitor a list of KPI given by the RNO manager. For this you select the parameters on the left size, right click on it and choose add to favorites. Do the same for all KPI. You are lucky because you do this just once. Every new trace you will load will have a quick view ONLY of this parameters in the favorites sheet( it is on the bottom side of your screen, left corner) Actix Module 32 All rights reserved 2002, Alcatel 4.5-SAVING YOUR WORK AND YOUR SETTINGS > Dont forget Save your Workspace. Save your settings for legends, favorites, special queries. Actix Module 33 All rights reserved 2002, Alcatel OVERVIEW 1. INSTALL ACTIX 2. CONFIGURE ACTIX 3. MENU ACTIX 4. USE ACTIX 5. OPTIMIZATION Actix Module 34 All rights reserved 2002, Alcatel 5- Optimization 1. What to analyze from the data collection? 2. What/How to analyze with ACTIX Analyzer? 3. The Optimization Process Diagram, using ACTIX 4. Optimization Actions 5. Conclusion Actix Module 35 All rights reserved 2002, Alcatel Exercices: > Open a sd5 file. > Display in on a map: Coverage attribute Quality attribute Call drop/ Call setup fail (parameters are in Favorite ) > Made a statistic report. > Display on a table, on a chart, workbook, > Change the legend. > Export a map > Launch an analyse, > Open a form, protocol stack. Thank You