0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
161 visualizzazioni2 pagine
Flocrete SP42 is a liquid concrete admixture that reduces the water content needed in concrete mixes. This allows for improved workability while increasing strength. It can produce stronger, more durable concrete by reducing permeability at the cement ratio. Flocrete SP42 improves cohesion and reduces problems associated with placing and compacting concrete.
Flocrete SP42 is a liquid concrete admixture that reduces the water content needed in concrete mixes. This allows for improved workability while increasing strength. It can produce stronger, more durable concrete by reducing permeability at the cement ratio. Flocrete SP42 improves cohesion and reduces problems associated with placing and compacting concrete.
Flocrete SP42 is a liquid concrete admixture that reduces the water content needed in concrete mixes. This allows for improved workability while increasing strength. It can produce stronger, more durable concrete by reducing permeability at the cement ratio. Flocrete SP42 improves cohesion and reduces problems associated with placing and compacting concrete.
Flocrete SP42 is a high performance liquid concrete
admixture formulated from selected polymers specially designed to enable the water content of the concrete to perform more eecvely. This eect can be used to improve workability and to increase ulmate strengths by the very high levels of water reducon in the concrete mix. Applications To increase workability retenon of fresh concrete. To provide increased ulmate strength by reducing water demand in concrete mixes. To produce high quality concrete of improved durability by reducing permeability. Advantages Higher strength with same cement content. Minimizing segregaon problems by improving cohesion. Improved workability reduces placing and compacon problems. Cement saving without aecng strength. More durable concrete as a result of reducon in permeability and lower water to cement rao. Chloride free. Compatibility Flocrete SP42 can be used with all types of Portland cement and cement replacement materials. Flocrete SP42 is compable with other DCP admixtures used in the same concrete mix. If more than one type of admixture is to be used in concrete mix, they must be dispensed to the concrete separately. Standards Flocrete SP42 complies with ASTM C494, Type B, D and G, depending on dosage used. Method of Use Flocrete SP42 should be added to the concrete with the mixing water to achieve opmum performance. Automac dispenser should be used to dispense the correct quanty of Flocrete SP42 to the concrete mix. Dosage The guidance dosage of Flocrete SP42 is 0.80 - 2.00 litres/ 100 kg of cemenous materials in the mix, including GGBFS, PFA or microsilica. Representave trials should be conducted to determine the opmum dosage of Flocrete SP42 to meet the performance requirements by using the materials and condions in actual use. Effects of Over Dosage Over dosing of Flocrete SP42 will cause the following: - Signicant increase in retardaon. - Increase in workability. Ulmate concrete strength will not be adversely aected and will generally be increased provided that proper concrete curing is maintained. Setting Time Although the se ng me is dependent on the dosage of Flocrete SP42, the following factors should be considered: i. Retardaon is increased with lower levels of tri- calcium in the cement. ii. Lower temperatures will delay the se ng me. iii. SRC cement gives higher retardaon level than ordinary cement. iv. Using more than one type of admixture in the same concrete mix could aect the se ng me. v. Retardaon level is increased when cement replacement materials are used in the concrete mix. Technical Properties @ 25 0 C: Color: Brown liquid Freezing point: -2C Specic gravity: 1.21 0.02 Chloride content: BS5075 Nil Air entrainment: Typically less than 2% addional air is entrained above control mix at normal dosages Flocrete SP42 High range concrete superplasciser admixture 0 1 - 0 0 1 4 - C - 2 0 1 1 Cleaning Flocrete SP42 can be washed with fresh cold water. Packaging Flocrete SP42 is available in 25 litres pails, 210 litres drums and 1000 litres bulks supply. Storage Flocrete SP42 shelf life is 12 months if stored at temperatures between 2C and 50C. If these condions are exceeded, DCP Technical Department should be contacted for advice. Cautions Health and Safety Flocrete SP42 is not classied as hazardous material. Flocrete SP42 should not come into contact with skin and eyes. In case of contact with eyes wash immediately with plenty of water and seek medical advice promptly. For further informaon refer to the Material Safety Data sheet. Fire Flocrete SP42 is non-ammable. More from Don Construction Products A wide range of construcon chemicals products are manufactured by DCP which include: Concrete admixtures. Grouts and chemical xings. Concrete repairs. Industrial oorings. Structural protecon. Waterproong. Flocrete SP42