0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
188 visualizzazioni2 pagine
Established in 1946, Carmit Mr-Fix, a member of the "Inrom building materials industries" group, is the largest manufacturer and distributor in its field in the Israeli market.
Carmit operates the most advanced labs and production facilities for a vast range of cement and gypsum based applications such as:
Tiling and grouting, plastering and rendering, flooring and coatings, waterproofing, concrete repairs, rapid cements and more.
Established in 1946, Carmit Mr-Fix, a member of the "Inrom building materials industries" group, is the largest manufacturer and distributor in its field in the Israeli market.
Carmit operates the most advanced labs and production facilities for a vast range of cement and gypsum based applications such as:
Tiling and grouting, plastering and rendering, flooring and coatings, waterproofing, concrete repairs, rapid cements and more.
Established in 1946, Carmit Mr-Fix, a member of the "Inrom building materials industries" group, is the largest manufacturer and distributor in its field in the Israeli market.
Carmit operates the most advanced labs and production facilities for a vast range of cement and gypsum based applications such as:
Tiling and grouting, plastering and rendering, flooring and coatings, waterproofing, concrete repairs, rapid cements and more.
High-quality, highly exible two-component cement based compound
for multi-purpose sealing. Suitable for positive and negative sealing, used to seal water reservoirs, swimming pools, wet rooms ect. Properties and main applications: nHighly exible two-component cement based compound for sealing of walls and oors. Combines exibility and excellent adhesion. nSuitable for positive and negative sealing. nUses for sealing of swimming pools and drinking water reservoirs (according to the approval of Israel Ministry of Health). nSealing of concrete walls as preparation for wet or dry cladding. n Interior and exterior sealing of shelters and basements, sealing of concrete roofs beneath ooring, sealing of open balconies, planters, kitchens and bathrooms. nExcellent adhesion to infrastructures like wood, metal, PVC, ext. nDue to the excellent adhesion to various infrastructures and high exibility, the compound is used as a primer between cement systems and other systems. nSuitable for sealing of the back of stone surfaces using industrial building methods. Composition: A compound containing minerals, cement and hydraulic additives + latex. Technical data: Capable of bridging over cracks of 3mm. Adhesion capacity: approx. 2.55 MPa. Elongation under maximum load = approx. 35% Negative water Proong up to 7 ATM. Infrastructures: Concrete, concrete blocks, Ytung blocks, Silicat, plaster etc. Packaging: Part A powder: paper bags of 25-kg. Part B liquid: plastic container of 10-kg. Consumption: About 2.5 kg per sq/m 2 with two layers of 1-mm thickness each. For sealing against water pressure of more than 3-m water level higt, a third sealing layer has to be applied. How to Use: n Thoroughly clean the surface from dust, soil, oils, loose parts and any other containment. nWash the infrastructure up to saturation and remove excess water. nExternal defects, gravel pockets in concrete, areas around wires and exposed reinforcement bars areas must be excavated and repaired before sealing is applied, until the infrastructure is smooth and leveled using Mr. x Super Solid 650/651 (see specication). nCoves have to be done along the line of contact between corners using suitable materials, 24 hours before the application of Itumat Plus 502. nPour to a mixing container the content of Itumat Plus 502, part B. Gradually add while mixing with a mechanical mixer the content of the powder bag, part A. Mix thoroughly to obtain a uniform easy-to-apply mixture 0.5L water can be added in order to obtain good workability conditions, only if needed. n Apply the mixture to the side of the wall (positive and negative sealing) using a brush or trowel. n It is recommended to apply Itumat Plus 502 using two different shades white or grey cement to ensure complete cover of the area by the sealant. nApply 2-3 coats according to expected moisture Preasure. The layers are applied with a time difference of 12-24 hours, applied in cross coats. Warning: nThe product must not be applied when the infrastructure temperature is less than 5C and more than 35C. n In conned spaces with out proper ventilation, rst make sure that the rst layer is dry before the second layer is applied (to accelerate the drying process, a fan may be used). M i s t e r
F i x
I t u m a t
P l u s
5 0 2 Concrete Floor BLOCKS WALL BLOCKS WALL Concrete Floor 2 minimum incline Elastic Water Proof Matirial Roop Finish Base Plaster 720 Exterior Plaster 710 Itumat Plus 502 Workability: About 1 1/2 hour. Cleaning: With water as long as the product is wet. When dry, use acetone for cleaning. Storage: Store the product in its original packaging in a shaded and dry place, up to 8 months from the date of production. CARMIT MISTER FIX Ltd P.O.Box 3530 CAESAREA 38900 ISRAEL Fax. 972-4-6371124 | Tel. 972-4-6178906 www.mrx.co.il