Volume Calculation that adopted to find earthwork quantities for
various civil engineering projects like:
Road Work Irrigation Canal project Tank Survey Earth Moving And etc. Earthworks - created through the moving and/or processing of massive quantities of soil or unformed rock. Cutting - The process of excavating earth material from a work location to achieve the desired topography. Filling - the process of moving the excavated material or additional earth material to a work location to achieve the desired topography. Typically, earthwork is done in the following projects: Road works Railways Irrigation project such as canals and dams Other common earthwork applications are land grading to reconfigure the topography of a site, or to stabilize slopes There are four popular methods of earthwork calculation: Section method Average method Division by Square method Contour method Preparing for Earthwork Calculation Finding the grid Levels Interpolating the Available Elevations at the Grid Points Weighted average Triangulation Read full article here: http://www.surveydrawing.net/prepare- earthwork-data.html Four different Volume calculation methods should be in practice Section Method Average method Division of Square method Contour Method For calculating the volume, always two sets of surface data are required. Initial Level: Original Ground Level (OGL) (survey data) Final Level: Proposed/Designed Level (estimate) or Formation Level (survey data) Read full article here: http://www.surveydrawing.net/earthwork- volume-section.html In trapezoidal method, each segment of the section is divided into various trapezoids and triangles. Trapezoidal Area A = 1/2 X a X (b1+b2) Triangle area A = a * b/2 Read full article here: http://www.surveydrawing.net/earthwork-volume- trapezoidal.html Find all the further lessons provided by Survey Drawing Here at Volume Calculation (Earthwork / Takeoff) Methods