Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Internet Help
GENERAL
Installation
How can I tell if I have an Actiontec® GT701 or Actiontec GT701-wg modem?
Connections View this document (PDF) to help you identify if you have an Actiontec GT701 or
Actiontec GT701-wg modem.
Modems
Why is there a phone port on the back of my modem?
E-mail Use the built-in phone port on the Actiontec GT701-wg modem to plug in another phone -
one that can sit right next to the modem. A phone filter (microfilter) is unnecessary
Networking
because it's a pre-filtered phone port.
Security
How do I set up a wired (Ethernet) network with my modem?
Services You'll need to add a hub or switch. In most cases, the UPLINK port on the hub or switch
and Tools should be used to connect to the Actiontec® Wireless-Ready DSL Gateway – Model
GT701-wg. Visit your local electronics store to purchase a hub or switch, and follow the
Operating accompanying instructions.
Systems
Which protocols does the Actiontec® Wireless-Ready DSL Gateway – Model
Browsers GT701-wg support?
The internal LAN connections support multiple protocols (e.g., TCP/IP, NetBEUI, IPX/SPX,
and AppleTalk). The External WAN connection supports only TCP/IP.
Top Help Questions
What connection speeds does the Actiontec® Wireless-Ready DSL Gateway –
Model GT701-wg support?
How do I configure my
modem to work as a The yellow Ethernet connection is auto-detecting and supports 10 Megabits per
router? second (Mbps) or 100 Mbps connections.
How do I configure the The WAN connection supports up to 8 Mbps downstream and up to 1 Mbps
Actiontec GT701 modem upstream.
for wireless networking? The 802.11b wireless connection supports up to 11 Mbps connection speeds.
The 802.11g wireless connection supports up to 54 Mbps connection speeds.
Wireless speeds vary depending on signal quality, environmental factors and
Additional Help physical distance.
file:///Users/mattj/Documents/PCOM%20DSL%20Project/Qwest%20Internet%20Help%20%7C%20Modem%20Support.webarchive Page 1 of 3
Qwest Internet Help | Modem Support 08/09/2007 10:04 AM
64-bit WEP
128-bit WEP
256-bit WEP
WEP+802.1x
WPA
Wireless MAC Authentication
NETWORKING
How can I make the FTP or Web server on my network available to Internet
users?
For a Web server, enable port forwarding for port 80 to the IP address of your
Web server. (We recommend you configure your server to use a static IP
address.)
For an FTP server, enable port forwarding for port 21 to the IP address of your FTP
server. (We recommend you configure your FTP server to use a static IP address.)
SECURITY
file:///Users/mattj/Documents/PCOM%20DSL%20Project/Qwest%20Internet%20Help%20%7C%20Modem%20Support.webarchive Page 2 of 3
Qwest Internet Help | Modem Support 08/09/2007 10:04 AM
Copyright © 2006 Qwest | All Rights Reserved | Legal Notices | Privacy Policy
file:///Users/mattj/Documents/PCOM%20DSL%20Project/Qwest%20Internet%20Help%20%7C%20Modem%20Support.webarchive Page 3 of 3