7 Objectives: Water Treatment Plant Safety LI 201 (Level indicator in raw water well and screens) raw water may overflow and may cause flooding in plant. Filters clogging would cause high pressure build up. Environmental Protection pH sensor (backwash water pH indicator near filters) to maintain neutral pH for backwash water. TI (backwash water temperature indicator near filters) to maintain backwash water temperature within required limits for marine life. Equipment Protection TY - 103 (Temperature computer output connected to pneumatic valve) high temperature may destroy pipes and valves. FC -103 (Flow controller in fluoride inlet) to maintain acid concentration for water treatment. Too much acid can affect the pH of the water. FC -102 (Flow controller in chloride inlet) to maintain acid concentration for water treatment. Too much acid can affect the pH of the water Pumps no flow could damage pumps Settling Tank Total Suspended Solids must be monitored to avoid clogging. Smooth Operation Production Rate FIC - 201 (Flow indicator and controller connected to flow transmitter near raw water well) flow rate should be controlled to maintain the production rate. FIC - 801 (Flow indicator and controller connected to flow transmitter near Pinecrest School) flow rate should be controlled to ensure adequate supply to end users. Product Quality TY 101 (Temperature computer output connected to pneumatic valve) high temperature may affect the quality of output. FC -103 (Flow controller in fluoride inlet) to maintain acid concentration for water treatment. Too much acid can affect the pH of the water. FC -102 (Flow controller in chloride inlet) to maintain acid concentration for water treatment. Too much acid can affect the pH of the water LC - 202 (Level controller in inlet Alum) to maintain coagulant concentration in flocculation tank. TIC - 201 (Temperature indicator and controller in Flocculation tank) to maintain temperature in flocculation tank to allow proper flocculation process. Propeller (inside the flocculation tank) proper flocculation must be maintained to ensure product quality. High Profit LI 201 (Level indicator in raw water well and screens) to avoid spillage or shortage in supply. LC 301 (Level controller in flocculation tank) to avoid spillage or shortage in supply. Monitoring and diagnosis FT 101; FC 101 (Flow Transmitter and Flow Controller near the Quinte bay intake crib) monitoring of flow from the Quinte bay intake crib to regulate the input flow. FT 802; FC 802 (Flow Indicator near Bloomfield Tower) monitoring of flow to Bloomfield Tower to ensure adequate supply to end users. pH sensor (backwash water pH indicator near filters) to maintain neutral pH for backwash water.