Vodafone NZ 08 February 2013 Irwan Radius / v3.0 / 08.02.2013 2 Nokia Siemens Networks 2013 Document History Date Version Author Change Notes 7 January 2013 0.0 Irwan Radius Draft Version for Review 11 January 2013 1.0 Irwan Radius Clare Logan Official Version After Feedbacks Review 15 January 2013 2.0 Irwan Radius Update Connecting Diagram for LTE-GSM RxDiversity Sharing Configuration 08 February 2013 3.0 Irwan Radius Add Connecting Diagram XIII for LTE nonMIMO nonRF Sharing Configuration Update on the eNB and cell naming Irwan Radius / v3.0 / 08.02.2013 3 Nokia Siemens Networks 2013 This document provides a guideline to : perform LTE BTS commissioning & integration. create the commissioning file for LTE BTS.
This guideline is prepared for Speed III LTE rollout.
This guideline is based on SW release RL30.
General Info Irwan Radius / v3.0 / 08.02.2013 4 Nokia Siemens Networks 2013 1) Connect & Login to BTS 2) Update New SW to BTS 3) Select Commissioning Template 4) Modify Commissioning Template to Create Commissioning File for LTE BTS 5) Send Parameters to BTS & Reset 6) Antenna Sweep & Auto-detection of MHA 7) Modify Antenna Line Settings 8) Set PCI, RACH Root Sequence, & TAC to Final Value 9) Re-send Parameters to BTS, Unlock, & Reset 10)Verify BTS State & Check Alarms
Summary of Procedure I. Object Creation for LTE Site in NetAct (1) II. LTE BTS Commissioning & Integration 1 Explained in a separate document. Irwan Radius / v3.0 / 08.02.2013 5 Nokia Siemens Networks 2013 LTE BTS Commissioning & Integration
- Connect & Login to BTS Site - Update New SW to BTS Site - Select Commissioning Template Irwan Radius / v3.0 / 08.02.2013 6 Nokia Siemens Networks 2013 Irwan Radius / v3.0 / 08.02.2013 Login to the BTS using BTS Site Manager. User name : Nemuadmin Password : nemuuser Accept the self-signed BTS certificate. Login to BTS Using BTS Site Manager Note : Select and use the right version of BTS Site Manager which is compatible with the SW package of the LTE BTS. E.g. for BTS SW package release version LN3.0_ENB_1103_772_11, use BTS Site Manager version 3.0.1203.
7 Nokia Siemens Networks 2013 Update New SW to BTS Update new SW to the BTS and take the new SW into use. The contents of the SW package are defined in a master file (i.e. TargetBD.xml or SW package zip file).
SW update takes approximately 20-30 minutes to complete.
Irwan Radius / v3.0 / 08.02.2013 8 Nokia Siemens Networks 2013 Irwan Radius / v3.0 / 08.02.2013 Locate & Select the Commissioning Template - Template - Select this if you are using an existing commissioning file as a template file that contains the parameters to be used in the commissioning. You can change the parameters when going through the Wizard pages. Select the right template. Currently, there are 8 templates provided.
ONLY USE THESE TEMPLATES. DO NOT CREATE OWN FROM PREVIOUS SITE INSTALL ! 9 Nokia Siemens Networks 2013 LTE BTS Commissioning & Integration
Based on the information provided in the RF Spec : select the type of System Module and RF Module(s) define the number of RF Module(s) required 1 11 Nokia Siemens Networks 2013 Irwan Radius / v3.0 / 08.02.2013 Site Properties 2 2 2 3 3 4 5 4 4 5 Based on the information provided in the RF Spec and Transpec, fill in the following fields in Site Properties : Site Name, Location, & Description BTS ID NTP Server IP address Primary & Secondary DNS Server IP address 2 12 Nokia Siemens Networks 2013 Security Leave the Security configuration as it is now. No modification is needed.
Irwan Radius / v3.0 / 08.02.2013 13 Nokia Siemens Networks 2013 Irwan Radius / v1.0 / 11.01.2013 Physical Layer Configuration Select the right PDH Interface and Ethernet Interface based on the information provided in the Transpec.
Always select Autodetect for the Ethernet Interface. 7 6 7 6 In this example : BTS05 = LTE . BTS01 = U900. E1 IF-1 in LTE BTS will be connected to E1 IF-4 in U900 BTS. 14 Nokia Siemens Networks 2013 Irwan Radius / v1.0 / 11.01.2013 Ethernet Switching, Ethernet Link OAM, & Ethernet Service OAM Leave the Ethernet Switching , Ethernet Link OAM , and Ethernet Service OAM configuration as they are now. No modification is needed.
15 Nokia Siemens Networks 2013 Irwan Radius / v1.0 / 11.01.2013 IP Interfaces (1) Based on the information provided in the Transpec, configure : MTU size VLAN ID and VLAN IP Address (see next page) 8 8 16 Nokia Siemens Networks 2013 IP Interfaces (2) 10 9 9 9 9 10 10 10 Irwan Radius / v3.0 / 08.02.2013 17 Nokia Siemens Networks 2013 Quality of Service & Timing Over Packet Leave the Quality of Service and Timing over Packet configuration as they are now. No modification is needed.
Irwan Radius / v3.0 / 08.02.2013 18 Nokia Siemens Networks 2013 Irwan Radius / v3.0 / 08.02.2013 Application Address 12 11 12 UCS-plane 11 M-plane M-plane UCS-plane Based on the information provided in the Transpec, select the IP interface for : User Plane (U) Control Plane (C) Management Plane (M/OAM) Synchronication Plane (S)
19 Nokia Siemens Networks 2013 Irwan Radius / v1.0 / 11.01.2013 RTT Measurement , IP Security, and Synchronization Leave the RTT Measurement , IP Security, and Synchronization configuration as they are now. No modification is needed.
20 Nokia Siemens Networks 2013 Irwan Radius / v1.0 / 11.01.2013 Routing Based on the information provided in the Transpec, configure the static route for : S-GW MME OAM
13 13 21 Nokia Siemens Networks 2013 IP Filtering & Measurement Configuration Leave the IP Filtering and Measurement Configuration as they are now. No modification is needed.
Irwan Radius / v3.0 / 08.02.2013 22 Nokia Siemens Networks 2013 BTS Settings Select the correct Time Zone for New Zealand i.e. (GMT+12) NZ.
Select the correct Synchronization sources for BTS fault management i.e. Transmission synchronization (TDM/SyncE/ToP) in use.
Based on the information provided in the RF Spec, fill in the Module locations i.e. the location of the RF modules. E.g. ELTOD / EATON cabinet , RRH , Shelter.
14 15 16 Irwan Radius / v3.0 / 08.02.2013 23 Nokia Siemens Networks 2013 Irwan Radius / v1.0 / 11.01.2013 Concurrent Mode Settings (1) Non RF Sharing Based on the information provided in the RF Spec, configure the Concurrent Mode Settings of the BTS.
Non RF Sharing 17 17 Note : Refer to Connecting Diagram no. I VI & XIII in the Appendix for Non-RF Sharing configuration.
24 Nokia Siemens Networks 2013 Irwan Radius / v1.0 / 11.01.2013 Concurrent Mode Settings (2) RX Diversity Sharing (LTE1800 & GSM1800) RxDiv Sharing 17 17 Note : Refer to Connecting Diagram no. VII XII in the Appendix for RxDiversity Sharing configuration.
25 Nokia Siemens Networks 2013 Irwan Radius / v1.0 / 11.01.2013 Concurrent Mode Settings (3) RF Sharing (LTE1800 & GSM1800) 17 17 RF Sharing This is not yet supported on current SW release ! 26 Nokia Siemens Networks 2013 Irwan Radius / v1.0 / 11.01.2013 Cell Resources (1) MIMO Site Based on the information provided in the RF Spec : Define the number of cells under Local cells. Configure the the antenna line for each cell. (2) Set the MIMO settings. - For MIMO site, MIMO type is set to Dynamic Open Loop MIMO. - For non-MIMO site, there is no need to set the MIMO type (see next page). Set the carrier power (for each cell). 21 20 18 18 21 20 19 (2) Depending on configuration type. Refer to Connecting Diagram no. I VI in the Appendix for MIMO configuration. 19 27 Nokia Siemens Networks 2013 Cell Resources (2) non-MIMO Site Non-MIMO site 18 21 21 18 19 (2) Depending on configuration type. Refer to Connecting Diagram no. VII XIII in the Appendix for non-MIMO configuration. 19 Irwan Radius / v3.0 / 08.02.2013 28 Nokia Siemens Networks 2013 LTE Carriers Based on the information provided in the RF Spec, set the LTE Carriers of every cell as follow : Downlink (TX) carriers. - Bandwidth = 20 MHz - EARFCN = 1800 (3) Uplink (TX) carriers. Corresponding uplink carriers will be automatically set based on the downlink carriers. 22 22 (3) Subject to change after refarming. Irwan Radius / v3.0 / 08.02.2013 29 Nokia Siemens Networks 2013 Antenna Line Management & Antenna Line Settings Leave the Antenna Line Management as it is now. No modification is needed. Irwan Radius / v3.0 / 08.02.2013 30 Nokia Siemens Networks 2013 Irwan Radius / v3.0 / 08.02.2013 Antenna Line Settings Leave the Antenna Line Settings as it is now. However, once antenna sweeps and auto- detect of MHA are done, Antenna Settings and MHA Settings have to be updated. Important ! For RxDiversity Sharing (LTE1800 & GSM1800) configuration, on each diversity branch the following parameters need to be set as follow: Additional Rx Gain : 29.0 dB Total loss : -1.0 dB
The same value also has to be set on each diversity branch on the GSM1800 BTS. 23 23 31 Nokia Siemens Networks 2013 Irwan Radius / v1.0 / 11.01.2013 TMARET/RET & External Fault and Control Settings Leave the Siemens Properties AISG1.1 TMARET and RET Settings, System Module External Fault and Control Settings, and Radio Module External Fault and Control Settings as they are now. No modification is needed.
Note : VFNZ is using RCUA for RET. Hence, it is not available for LTE. External alarms will be collected by 3G. Hence, they are not available for LTE. 32 Nokia Siemens Networks 2013 Radio Network Configuration (1) - MRBTS Under MRBTS, based on the information provided in the Transpec, configure : Multiradio flexi BTS site identifier (mrbtsid)
24 24 Irwan Radius / v3.0 / 08.02.2013 33 Nokia Siemens Networks 2013 Irwan Radius / v1.0 / 11.01.2013 Radio Network Configuration (2) - LNBTS Under MRBTS, based on the information provided in the Transpec & RF Spec, configure : Macro eNB identifier (lnbtsId) eNB name
26 26 25 25 34 Nokia Siemens Networks 2013 Radio Network Configuration (3) ADIPNO Under ADIPNO, based on the information provided in the Transpec, configure : Primary IP address of main MME
27 27 Irwan Radius / v3.0 / 08.02.2013 35 Nokia Siemens Networks 2013 Radio Network Configuration (4) SGW IP Address Under GTPU, based on the information provided in the Transpec, configure : SGW IP address
28 28 Irwan Radius / v3.0 / 08.02.2013 36 Nokia Siemens Networks 2013 Radio Network Configuration (5.1) LNCEL Under LNCEL for every cell, configure : LTE cell configuration identifier (lncellId) Cell name Physical layer cell identity (PCI) RACH root sequence Rank indication reporting enable Tracking area code (TAC)
See next page for more details.
Irwan Radius / v3.0 / 08.02.2013 37 Nokia Siemens Networks 2013 Radio Network Configuration (5.2) LNCEL lncellId is lnbtsId with 1, 2, 3 added to end for each cell. Cell name is eNB name with 1LCL01, 2LCL02, 3LCL03 added to end for each cell. Physical layer cell identity (PCI) is based on the information provided by Optimisation team. (4)
RACH root sequence is based on the information provided by Optimisation team. (4)
Tracking area code (TAC) is based on the information provided by Optimisation team. (4)
29 30 31 32 33 Irwan Radius / v1.0 / 11.01.2013 (4) In the BTS commissioning file template, PCI, RACH root sequence, and TAC are set to dummy (temporary) value. The final value is provided by Optimisation team and saved in a file located in the server under the following directory : T:\LTE Parameters (or \\nasftc\LTE Parameters) Immediately after the site is commissioned, commissioning engineer on the site will inform Config team, get the final value of PCI, RACH root sequence, and TAC of the site, and update them to the BTS accordingly. 38 Nokia Siemens Networks 2013 Radio Network Configuration (5.3) LNCEL The following parameters also need to be checked (in every cell) : Administrative state Rank indication reporting enable
For MIMO site, rank indication reporting enable is set to true. However, for non-MIMO site, rank indication reporting enable has to be set to false. Administrative state of each cell should be set to locked. Administrative state can be changed to unlocked only after : antenna installation is finished and antenna settings are modified accordingly MHA installation and auto-detection are completed and MHA settings are modified accordingly PCI, RACH root sequence, and TAC are set to the final value 34 35 Irwan Radius / v3.0 / 08.02.2013 39 Nokia Siemens Networks 2013 Summary of Parameters (1) No Wizard Page Parameter Name (as appeared in the BTS Manager) Abbreviated Name Managed Object Class Value 1 HW Selection Radio Module - - Refer to RF Spec. HW Selection System Module - - Refer to RF Spec. 2 Site Properties Name systemTitle FTM Refer to RF Spec. Site Properties Location locationName FTM Refer to RF Spec. Site Properties Description userLabel FTM Refer to RF Spec. 3 Site Properties BTS ID btsId IPNO Refer to Transpec. 4 Site Properties NTP Server ntpServers INTP Refer to Transpec. 5 Site Properties Primary DNS Server serverIpAddress IDNS Refer to Transpec. Site Properties Secondary DNS Server serverIpAddress2 IDNS Refer to Transpec. 6 Physical Layer Configuration PDH Interface ID pdhPSTTPId PPTT Refer to Transpec. 7 Physical Layer Configuration Ethernet Interface ID ethLinkId ETHLK Refer to Transpec. Speed and duplex speedAndDuplex ETHLK Set to "Autodetect". 8 IP Interfaces MTU Size mtu IEIF Refer to Transpec. 9 IP Interfaces VLAN ID vlanId IVIF Refer to Transpec. 10 IP Interfaces VLAN IP Address localIpAddr IVIF Refer to Transpec. 11 Application Address User Plane uPlaneIpAddress IPNO Refer to Transpec. Application Address Control Plane cPlaneIpAddress IPNO Refer to Transpec. Application Address Synchronization Plane sPlaneIpAddress IPNO Refer to Transpec. 12 Application Address Management Plane mPlaneIpAddress IPNO Refer to Transpec. 13 Routing Destination destIpAddr IPRT Refer to Transpec. Routing Netmask netmask IPRT Refer to Transpec. Routing Gateway gateway IPRT Refer to Transpec. 14 BTS Settings Time Zone timeZone MRBTS Select "(GMT+12)NZ". 15 BTS Settings Synchronization sources for BTS fault management tdmSyncInUse BTSSCL Select "Transmission synchronization (TDM/SyncE/ToP) in use". 16 BTS Settings Module locations moduleLocation RMOD Refer to RF Spec. Irwan Radius / v3.0 / 08.02.2013 40 Nokia Siemens Networks 2013 Irwan Radius / v3.0 / 08.02.2013 Summary of Parameters (2) No Wizard Page Parameter Name (as appeared in the BTS Manager) Abbreviated Name Managed Object Class Value 17 Concurrent Mode Settings RF sharing enabled rfSharingEnabled BTSSCL Refer to RF Spec & Connecting Diagram. Concurrent Mode Settings Radio module connections - - Refer to RF Spec & Connecting Diagram. 18 Cell Resources Local cells lCellId LCELL Refer to RF Spec. 19 Cell Resources Antennas antlId LCELL Refer to RF Spec & Connecting Diagram. 20 Cell Resources MIMO type dlMimoMode LNCEL Refer to RF Spec. 21 Cell Resources Power pMax LNCEL Refer to RF Spec. 22 LTE Carriers Bandwidth (DL) dlChBw LNCEL Refer to RF Spec. LTE Carriers EARFCN (DL) earfcnDL LNCEL Set as "1800" (subject to change after refarming). LTE Carriers Bandwidth (UL) ulChBw LNCEL Refer to RF Spec. LTE Carriers EARFCN (UL) earfcnUL LNCEL Set as "1800" (subject to change after refarming). 23 Antenna Line Settings Additional Rx Gain additionalRxGain ANTL For RxDiv Sharing configuration only and on each diversity branch: set to "29.0 dB". Antenna Line Settings Total Loss antennaTotalLoss ANTL For RxDiv Sharing configuration only and on each diversity branch: set to "-1.0 dB". 24 Radio Network Configuration Multiradio flexi BTS site identifier mrbtsId MRBTS Refer to Transpec. 25 Radio Network Configuration Macro eNB identifier lnbtsId LNBTS Refer to Transpec. 26 Radio Network Configuration eNB name enbName LNBTS Refer to RF Spec. 27 Radio Network Configuration Primary IP address of main MME mmeIpAddrPrim ADIPNO Refer to Transpec. 28 Radio Network Configuration SGW IP address sgwIpAddress GTPU Refer to Transpec. 29 Radio Network Configuration LTE cell configuration identifier lnCelId LNCEL Equal to lnbtsId with "1","2","3" added to end for each cell. 30 Radio Network Configuration Cell name cellName LNCEL Equal to eNBname with "1LCL01","2LCL02","3LCL03" added to end for each cell. 31 Radio Network Configuration Physical layer cell identity phyCellId LNCEL Provided by Optimisation Team. 32 Radio Network Configuration RACH root sequence rootSeqIndex LNCEL Provided by Optimisation Team. 33 Radio Network Configuration Tracking area code tac LNCEL Provided by Optimisation Team. 34 Radio Network Configuration Administrative state administrativeState LNCEL Set to "locked". 35 Radio Network Configuration Rank indication reporting enable riEnable LNCEL For MIMO: set to "true". For non-MIMO: set to "false". 41 Nokia Siemens Networks 2013 LTE BTS Commissioning & Integration
- Send Parameters to BTS & Reset Irwan Radius / v3.0 / 08.02.2013 42 Nokia Siemens Networks 2013 Irwan Radius / v3.0 / 08.02.2013 Send the Commissioning Parameters to BTS Click Send Parameters to send the commissioning parameters to the BTS.
Note that once the Send Parameters button is clicked, the process cannot be canceled. 43 Nokia Siemens Networks 2013 LTE BTS Commissioning & Integration
- Modify Antenna Line Settings Irwan Radius / v3.0 / 08.02.2013 44 Nokia Siemens Networks 2013 Modify Antenna Line Settings After antenna sweep and auto-detection of MHA : check that Antenna Line Management and AISG MHA Settings have been automatically updated. add additional data i.e. Installation date, BTS ID, and Sector ID in AISG MHA Settings modify Antenna Line Settings accordingly (e.g. total loss).
- Verify BTS State & Check Alarms Irwan Radius / v3.0 / 08.02.2013 46 Nokia Siemens Networks 2013 Irwan Radius / v1.1 / 15.01.2013 Verify BTS State After Integration & Check Alarms Once integrated, the BTS operational state should show On air and the TRS operational state should show TRS commissioned. Once communication is established with iOMS, OAM state should show OAM connected. If GTP-U supervision is enabled, check to make sure that there is no GTP-U Path Failure alarm related to the connection to S-GW. Check to make sure that there is no S1 SCTP Path Failure alarm related to the connection to MME. 47 Nokia Siemens Networks 2013 Appendix : Connecting Diagram Irwan Radius / v3.0 / 08.02.2013 48 Nokia Siemens Networks 2013 List of Connecting Diagram
No. # Sector MIMO LTE BW Concurrent Mode RRH Deployment LTE 1800 GSM 1800 # FSME # FXEA # ESMB # FXEA I 1 Yes 20 MHz Non-RF Sharing No 1 1 - - II 2 Yes 20 MHz Non-RF Sharing No 1 2 - - III 3 Yes 20 MHz Non-RF Sharing No 1 2 - - IV 1 Yes 20 MHz Non-RF Sharing Yes 1 1 - - V 2 Yes 20 MHz Non-RF Sharing Yes 1 2 - - VI 3 Yes 20 MHz Non-RF Sharing Yes 1 3 - - VII 1 No 20 MHz RxDiversity Sharing No 1 1 1 1 VIII 2 No 20 MHz RxDiversity Sharing No 1 1 1 1 IX 3 No 20 MHz RxDiversity Sharing No 1 1 1 1 X 1 No 20 MHz RxDiversity Sharing Yes 1 1 1 1 XI 2 No 20 MHz RxDiversity Sharing Yes 1 2 1 2 XII 3 No 20 MHz RxDiversity Sharing Yes 1 3 1 3 XIII 3 No 20 MHz Non-RF Sharing No 1 1 - - Irwan Radius / v3.0 / 08.02.2013 49 Nokia Siemens Networks 2013 Irwan Radius / v3.0 / 08.02.2013 Connecting Diagram I LTE MIMO, BW 20 MHz 1-Sector (G Type) F X E A F S M E LTE 1800 2-port antenna TxRx TxRx TxRx Rx Rx Rx 50 Nokia Siemens Networks 2013 Irwan Radius / v3.0 / 08.02.2013 Connecting Diagram II LTE MIMO, BW 20 MHz 2-Sector (H Type)
F S M E LTE 1800 2-port antenna F X E A F X E A 2-port antenna TxRx TxRx TxRx TxRx TxRx TxRx Rx Rx Rx Rx Rx Rx 51 Nokia Siemens Networks 2013 Irwan Radius / v3.0 / 08.02.2013 Connecting Diagram III LTE MIMO, BW 20 MHz 3-Sector (H Type)
F S M E LTE 1800 2-port antenna F X E A F X E A 2-port antenna 2-port antenna TxRx TxRx TxRx TxRx TxRx TxRx Rx Rx Rx Rx Rx Rx 52 Nokia Siemens Networks 2013 Irwan Radius / v3.0 / 08.02.2013 Connecting Diagram IV LTE MIMO, BW 20 MHz 1-Sector RRH Deployment (G Type)
F S M E LTE 1800 F X E A F X E A F X E A 2 - p o r t
a n t e n n a
C e l l
1
C e l l
2
C e l l
3
2 - p o r t
a n t e n n a
2 - p o r t
a n t e n n a
TxRx TxRx TxRx TxRx TxRx TxRx TxRx TxRx TxRx Rx Rx Rx Rx Rx Rx Rx Rx Rx 55 Nokia Siemens Networks 2013 Irwan Radius / v3.0 / 08.02.2013 Connecting Diagram VII LTE-GSM RxDiversity Sharing, non-MIMO, BW 20 MHz 1-Sector (A Type) F S M E LTE 1800 GSM 1800 2-port antenna F X E A E S M B F X E A TxRx TxRx TxRx Rx Rx Rx TxRx TxRx TxRx Rx Rx Rx RxOut RxOut RxOut RxOut RxOut RxOut On each diversity branch on both LTE and GSM BTS, the f ollowing parameters need to be set : Additional Rx Gain : 29.0 dB Total loss : -1.0 dB 56 Nokia Siemens Networks 2013 Irwan Radius / v3.0 / 08.02.2013 Connecting Diagram VIII LTE-GSM RxDiversity Sharing, non-MIMO, BW 20 MHz 2-Sector (A Type)
F S M E LTE 1800 GSM 1800 2-port antenna F X E A E S M B F X E A TxRx TxRx TxRx Rx Rx Rx TxRx TxRx TxRx Rx Rx Rx RxOut RxOut RxOut RxOut RxOut 2-port antenna On each diversity branch on both LTE and GSM BTS, the f ollowing parameters need to be set : Additional Rx Gain : 29.0 dB Total loss : -1.0 dB RxOut 57 Nokia Siemens Networks 2013 Irwan Radius / v3.0 / 08.02.2013 Connecting Diagram IX LTE-GSM RxDiversity Sharing, non-MIMO, BW 20 MHz 3-Sector (A Type)
F S M E LTE 1800 GSM 1800 2-port antenna F X E A E S M B F X E A TxRx TxRx TxRx Rx Rx Rx TxRx TxRx TxRx Rx Rx Rx RxOut RxOut RxOut RxOut RxOut 2-port antenna 2-port antenna On each diversity branch on both LTE and GSM BTS, the f ollowing parameters need to be set : Additional Rx Gain : 29.0 dB Total loss : -1.0 dB RxOut 58 Nokia Siemens Networks 2013 Irwan Radius / v3.0 / 08.02.2013 Connecting Diagram X LTE-GSM RxDiversity Sharing, non-MIMO, BW 20 MHz 1-Sector RRH Deployment (A Type)
F S M E LTE 1800 GSM 1800 E S M B F X E A F X E A 2 - p o r t
a n t e n n a
C e l l
1
TxRx TxRx TxRx TxRx TxRx TxRx RxOut RxOut Rx Rx Rx On each diversity branch on both LTE and GSM BTS, the f ollowing parameters need to be set : Additional Rx Gain : 29.0 dB Total loss : -1.0 dB 59 Nokia Siemens Networks 2013 Irwan Radius / v3.0 / 08.02.2013 Connecting Diagram XI LTE-GSM RxDiversity Sharing, non-MIMO, BW 20 MHz 2-Sector RRH Deployment (A Type) F S M E LTE 1800 GSM 1800 E S M B F X E A F X E A F X E A F X E A 2 - p o r t
a n t e n n a
2 - p o r t
a n t e n n a
C e l l
1
C e l l
2
TxRx TxRx TxRx TxRx TxRx TxRx TxRx TxRx TxRx RxOut RxOut Rx Rx Rx Rx Rx Rx TxRx TxRx TxRx On each diversity branch on both LTE and GSM BTS, the f ollowing parameters need to be set : Additional Rx Gain : 29.0 dB Total loss : -1.0 dB 60 Nokia Siemens Networks 2013 Irwan Radius / v3.0 / 08.02.2013 Connecting Diagram XII LTE-GSM RxDiversity Sharing, non-MIMO, BW 20 MHz 3-Sector RRH Deployment (A Type) F S M E LTE 1800 GSM 1800 E S M B F X E A F X E A F X E A F X E A F X E A F X E A 2 - p o r t
a n t e n n a
2 - p o r t
a n t e n n a
2 - p o r t
a n t e n n a
C e l l
1
C e l l
2
C e l l
3
TxRx TxRx TxRx TxRx TxRx TxRx TxRx TxRx TxRx TxRx TxRx TxRx TxRx TxRx TxRx TxRx TxRx TxRx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx RxOut RxOut RxOut RxOut RxOut RxOut On each diversity branch on both LTE and GSM BTS, the f ollowing parameters need to be set : Additional Rx Gain : 29.0 dB Total loss : -1.0 dB 61 Nokia Siemens Networks 2013 Irwan Radius / v3.0 / 08.02.2013 Connecting Diagram XIII LTE non-MIMO, BW 20 MHz 3-Sector (A Type)
F S M E LTE 1800 2-port antenna F X E A 2-port antenna 2-port antenna TxRx TxRx TxRx Rx Rx Rx