Sei sulla pagina 1di 2

D-197.1-AM2000N-ENG Rev. A.

4 06/2011
ANALOGUE CONTROL PANEL
AM2000


DESCRIPTION
AM2000N is a microprocessor analog control panel
for fire alarm systems management, developed in
compliance with EN-54.2 and EN-54.4 regulations.
This control panel has 2 analog loops that can
manage 99 detectors and 99 modules each, for a
total of 198 detectors and 198 i/o modules. The
control panel is also programmable through
PK2000 pc software, that allows: configuration,
storing and printing.
Available, on request, with MODBUS protocol.

MAIN FEATURES
Microprocessor-based system
2 analogue communication loops
Each line can manage 99 detectors + 99
input/output modules
Graphic backlit LCD display 8 lines, 40 columns
(240X64 dots).
2 serial interfaces in standard version:
- 1 RS-485 interface to connect up to 16
repeaters LCD6000N/T and LCD6000A;
- 1 RS-232 interface predisposed for PK
software.
4 access levels designed according to EN-54.2
and EN.54.4 standards.
3 password levels (Operator - Maintenance -
Configuration).
Configurable descriptions: 32 characters for
point; 32 characters for zone description.
150 physical zones and 400 logic groups.
User-programmable CBE (Control-by-event)
equations to program actions to be performed,
using logic operators (And-Or-Xor-Delay-etc.).
History log 999 events in non volatile memory.
Real time watch.
Self loop configuration with self device
recognition.
Software functions configurations for in field
devices.
Auto-recognition of points with the same address.
Alarm and fault management.
Programmable detectors alarm threshold.
Detector clean alarm signalling.
Low sensitivity detector signalling.
Automatic night/day mode.
WalkTest function for each zone.
Keyboard with specific function keys: evacuation,
delay reset, buzzer mute, sounder
silence/restore, reset.
Alphanumeric keys for in field configuration.





OUTPUTS
Supervised sounders output.
Voltage free contacts relay output:
- general alarm;
- general fault.

POWER SUPPLY
Control panel is powered by mains and in
mains fault condition it will continue normal
operation, thanks to batteries.
Mains requirements:
Voltage: 230 Vac single-phase -15% +10%.
Frequency: 50 / 60Hz.
Current: 0,5 A.
Power supply 24Vcc (27.6Vdc -10% +2%
ripple max. 100mVpp) 2,1A tot, (panels
power, user output, power supply for analog
devices on loop).
User output for auxiliary loads; in example:
bells, sounders, etc.
Battery charger:
- Output voltage: 27,6Vdc
- Output current: 1A - ripple max 100m Vpp
(with temperature compensation)
- Batteries: 2 x 12V 18 Ah max.
- Signalling: Low batteries, charger fault,
battery fault.


ENVIRONMENTAL FEATURES
Temperature range: - 5 C +40 C.
Humidity: 10 93 % (without condense).
Stock temperature: - 10 C +50 C.


MECHANICAL FEATURES
Weight: 6 Kg.
Dimensions: 267 x 483 x 111 mm.






D-197.1-AM2000N-ENG Rev. A. 4 06/2011
ANALOGUE CONTROL PANEL
AM2000




SISTEMA GESTIONE
QUALIT E AMBIENTE
CERTIFICATI
UNI EN ISO 9001:2008
UNI EN ISO 14001:2004
NOTIFIER ITALIA S.r.l. - A socio unico - 20097 San Donato Milanese (Ml) - Via Grandi, 22 - Tel.: 02/518971 - Fax: 02/5189730 - E-mail:
notifier@notifier.it Capitale Sociale 2.700.000,00 i.v. - C.C.A.A. 1456164 - Trib. Milano Reg. Soc. 348608 - Vol. 8549 Fasc. 8 - Partita IVA
IT 11319700156 (informativa privacy art. 3 Digs 196/03) - Ufficl Regionali: 10143 Torino Corso Potenza, 6 - Tel.: 011/0650611 - Fax: 011/4531183 -
E-mail: notifier.torino@notifier.it - 35010 Limena (PD) Via IV Novembre, 6/c Int. 9 - Tel.: 049/7663511 - Fax: 049/7663550 - E-mail:
notifier.padova@notifier.it - 40050 Funo di Argelato (BO) - Asta Servizi, Bl. 3B, Gall. B n. 85, Centergross - Tel.: 051/864855 - Fax: 051/6647638 - E-mail:
notifier.bologna@notifier.it - 50136 Firenze Via Aretina, 167/MTel/Fax: 055/289177 - 00118 Roma - Via Del Casale Santarelli, 51 - Tel.: 06/7988021 -
Fax: 06/79880250 - E-mail: notifier.roma@notifier.it - 80143 Napoli - Palazzo Prof. Studi - Centro Direzionale, Isola E2, Scala B, Piano 5 - Tel.:
081/7879398 - Fax: 081/7879159- E-mail: notifier.napoli@notifier.it - 70125 Bari - Via Delia Costituente, 29 - Tel.: 080/5013247 - Fax: 080/5648114 - E-mail:
notifier.bari@notifier.it - 95128 Catania - Viale Alcide De Gasperi, 187 - Tel.: 095/7128993 - Fax: 095/7120753 - E-mail: notifier.catania@notifier.it
www.notifier.it

Tutti i dati sono soggetti a cambiamento senza preavviso. Tutti i diritti di questa pubblicazione sono riservati.


PK2000
PK2000 is a PC software for AM2000N control panel, and
allows to:
Transfer and show control panels configurations on
PC.
Transfer programs from PC to control panel.
Create and manage a file-archive with
configurations, editable in any moment and
transferable to the control panel























The programming functions that can be realized by using
this software are the same the user can carry out working
on the control panel.
PK software is Windows XP compatible.
The communication between control panel and PC is
realized through RS232 serial port.

OPTIONAL BOARDS
SIB600W:
Microprocessor-based communication board for new
concentration system. SIB600W is equipped with
Ethernet port (LAN TCP/IP) and USB port for PC and
printer. SIB600W is linkable with all compatible external
devices.

SIB600OEM:
Microprocessor-based communication board, endowed
with an RS232/485 output for connection with NOTI-
FIRE-NET-2000N with CEIABI protocol or MODBUS on
request (only for fire system).











LCD PANELS REPEATER
Remote panels with LCD display for NOTIFIER AM
Series remote management.
Panels and annunciator are endowed with backlit
graphic LCD display 320x240 dots. Repeaters are
characterized by high brightness and contrast that
assure clear view in any light environment
condition.
The connection with panels is performed by RS-485
connection.

LCD-6000-N
Fire repeater.
LCD-6000-N is endowed
with seven keys that allow
navigation through different
menus and execution of
system management
functions: silent, reset,
disablement and lamp test.


LCD-6000-A
Zone programmable repeater.
LCD-6000-A shows
active panel events with
relative devices or
zones. The zone
displayed are configured
by PC with PK software.




LCD-6000-T
Technologic alarm repeater and Gas
detection.
Specific to display gas
detection related events
and 420mA technologic
events. LCD-6000-T is
equipped with 3 additional
LEDs for pre-alarm and
alarm levels.

Potrebbero piacerti anche