Sei sulla pagina 1di 29

.

FABRIC PREPARATION BEFORE FINISH

• WASHING OFF:
1.0 g/l Ladiquest-1097
Treat at 40°C for 10-15 minutes
Rinse thoroughly with cold water

• NEUTRALIZATION:
1.0 g/l Sirrix-NE
0.5 g/l Acetic acid
Treat at 60° C for 20-30 minutes
Wash cold..

STAIN REPELLENT FINISH:


40-60 g/l Nuva-HPC
pH 4-4.5 Adjust with acetic acid
Pad with 70-75 % pick up
Dry at 120°C
Cured at 150°C for 4 minutes.
FABRIC PREPARATION BEFORE FINISH

• WASHING OFF:
1.0 g/l ladiquest-1097
Treat at 40°C for 10-15 minutes
Rinse thoroughly with cold water

• NEUTRALIZATION:

1.0 g/l Sirrix-NE


0.5 g/l Acetic acid
Treat at 60°C for 20-30 minutes
Wash cold.

FINISHING PROCEDURE:

40-60 g/l Nuva-HPC


5 g/l Ceraperm-JET
Pad with 70-80 % pick up
Dry at 140°C
Cured at 150°C for 4 minute.
FABRIC PREPARATION BEFORE FINISH

• WASHING OFF:
1.0 g/l Ladiquest-1097
Treat at 40°C for 10-15 minutes
Rinse thoroughly with cold water

• NEUTRALIZATION:
1.0 g/l Sirrix-NE
0.5 g/l Acetic acid
Treat at 60°C for 20-30 minutes
Wash cold.

FINISHING PROCEDURE :

50 g/l Nuva-HPC
20 g/l Cassaperet-SRHA
pH 4-4.5 adjust with acetic acid
Pad with 70-75 % pick up
Dry at 120°C
Cured at 150°C for 4 minutes
FABRIC PREPARATION BEFORE FINISH

WASHING OFF:
1.0 g/l Ladiquest-1097
Treat at 40°C for 10-15 minutes
Rinse thoroughly with cold water
NEUTRALIZATION:
1.0 g/l Sirrix-NE
0.5 g/l Acetic acid
Treat at 60° C for 20-30 minutes
Wash cold.
FINISHING PROCEDURE:
40 g/l Nuva-SRB
10 g/l Nuva-HPC
80 g/l Arkofix-NEC
30 g/l Ceranine-L
40 g/l Sandolube-NVJ
12 g/l Magnesium chloride
Pad with 70-75 % pick up
Dry at 120°C
Cured at 150°C for 4 minutes.
FABRIC PREPARATION BEFORE FINISH

WASHING OFF:
1.0 g/l Ladiquest-1097
Treat at 40°C for 10-15 minutes
Rinse thoroughly with cold water

NEUTRALIZATION:
1.0 g/l Sirrix-NE
0.5 g/l Acetic acid
Treat at 60°C for 20-30 minutes
Wash cold.

FINISHING PROCEDURE:
40-60 g/l Nuva-FD/3585
pH 4-4.5 Adjust with acetic acid
Pad with 70-75 % pick up
Dry at 120°C
Cured at 150°C for 4 minutes.
FINISHING PROCEDURE:

40-60 g/l Arkofix-NEC


15-20 g/l Cassurit-HML
6-9 g/l Magnesium chloride
40-50 g/l Ceranine-L
20-30 g/l Sandoperm-FE
10-15 g/l Ceraperm-MW
0.5 g/l Acetic acid
Pad with 80 % % pick up
Dry at 110°C with residual moisture of 8-12 %(need
exact controlling)
Calandar at 180°c with 20-40 tons without friction
Calandar at 180°C with 20-40 tons friction (e.g 150-200
%)
Cure at 150-160°C for 2-4 minutes.
• FINISHING PROCEDURE:
60-80 g/l Arkofix-NEC
20 g/l Ceraperm-3K
20 g/l Ceranine-L
10 g/l Solusoft-SM
8 g/l Magnesium chloride

Pad with 70 % pick up


Dry at 120°C
Cured at 150°C for 4 minutes
FABRIC PREPARATION BEFORE FINISH

NEUTRALIZATION:
1.0 g/l Sirrix-NE
0.5 g/l Acetic acid
Treat at 60°C for 20-30 minutes
Wash cold.
FINISHING PROCEDURE:
40-80 g/l Nuva-HPC
80 g/l Arkofix-NEC
30 g/l Ceranine-L
5 g/l Ceraperm-JET
15 g/l Sanitized T 96-20
10 g/l Magnesium chloride
pH 4-4.5 Adjust with acetic acid
Pad with 70-80 % pick up
Dry at 140°C
Cured at 150°C for 4 minutes.
FABRIC PREPARATION BEFORE FINISH

• WASHING OFF:
1.0 g/l Ladiquest-1097
Treat at 40°C for 10-15 minutes
Rinse thoroughly with cold water
• NEUTRALIZATION:
1.0 g/l Sirrix-NE
0.5 g/l Acetic acid
Treat at 60°c for 20-30 minutes
Wash cold.
FINISHING PROCEDURE:
100 g/l Nuva-HPC/Nuva-HPU
100 g/l Arkofix-NEC
20 g/l Sandolube-SVN
5 g/l Ceraperm-JET
15 g/l Magnesium chloride
L:R = 1: 10
Temperature = room temp
Time = 20-30 minutes
Hydro with 50% remaining moisture
Tumble dry with 10% moisture
Press properly
Cured at 150° C for 15-20 minutes.
FABRIC PREPARATION BEFORE FINISH

NEUTRALIZATION:
1.0 g/l Sirrix-NE
0.5 g/l Acetic acid
Treat at 60°C for 20-30 minutes
Wash cold.

FINISHING PROCEDURE:

40 g/l Arkofix-NEC plus


80 g/l Appretan-N-9212
20 g/l Ceraperm-MW
20 g/l Ceranine-L
6 g/l Magnesium chloride

Pad with 70-75 % pick up


Dry at 120°C
Cured at 150°c for 4 minutes
FABRIC PREPARATION BEFORE FINISH

NEUTRALIZATION:
1.0 g/l Sirrix-NE
0.5 g/l Acetic acid
Treat at 60°C for 20-30 minutes
Wash cold.

FINISHING PROCEDURE:

60-80 g/l Arkofix-NEC


20 g/l Ceraperm- MW liq conc
20 g/l Ceramnine - L
12 g/l Magnesium chloride

Pad with 70-75 % pick up


Dry at 120°C
Cured at 150°C for 4 minutes
FINISHING PROCEDURE :
300 g/l Appretan-CTM
150 g/l Appretan-N 9415
60 g/l Cassurit-HML
9 g/l Magnesium chloride
Pad with 75-80 % pick up
Dry at 180°C for 45 seconds.
FINISHING PROCEDURE:
RECIPE-1 RECIPE-2

Appretan-MB g/l 100 50


Appretan-CTM g/l - 20
Ceranine-KWL flakes g/l 10 10

Pad with 75 % pick up


Dry at 140°C.
FINISHING PROCEDURE:
40 g/l Appretan-N 9212
10 g/l Solusoft-UP

Pad with 70 % pick up


Dry at 140°C
Cured at 160°C for 2 minutes.
FINISHING PROCEDURE:
20 g/l Decofix-SW
Pad with 70-80 % pick up
Dry at 120°C
Cured at 150°C for 2 minutes
FINISHING PROCEDURE:

80 g/l Appretan-701
60 g/l Appretan-N-9212
15 g/l Ceranine-L
15 g/l Ceraperm-MW
20 g/l Leomin-V-10049
Pad with 70-75% pick up
Dry at 120°c
Cured at 150°C for 3 minutes
Calendar on both sides.

Note: Do not stretch the fabric during finishing


FINISHING PROCEDURE:

400 g/l Pekoflam-OP

Pad with 70-75 % pick up


Dry at 140°C
FINISHING PROCEDURE:

400-500 g/l Pekoflam-HSD

Pad with 70-75 % pick up


Dry at 140°C
Cured at 150°C for 4 minutes
FINISHING PROCEDURE:
500 g/l Pekoflam-DPN
25 g/l Phosphoric Acid
60 g/l Cassurit-HML
Pad with 70-80 % pick up
Dry at 140°C
Cured at 150°C for 4 minutes

NEUTRALIZATION:

20 g/l Soda ash


Treat at 60°C for 15-20 minutes
Wash warm & cold
Dry at 130°C
BY EXHAUST METHOD:

FINISHING PROCEDURE:
L:R = 1 : 10
1.0 % Sanitized T 96-20
Treat at R/temp for 20 minutes
Hydro and dry at 100°C

BY CONTINOUS METHOD:
FINISHING PROCEDURE:
15 g/l Sanitized T 96-20
Pad with 70 % pick up
Dry at 140°C
FINISHING PROCEDURE:

50 g/l Sanitized GT 86-06

Pad with 70-75 % pick up


Dry at 130°C
FINISHING PROCEDURE:

15 g/l Actigard AM 21-16

Pad with 70-75 % pick up


Dry at 130°C
FINISHING PROCEDURE:
18 g/l Actifresh 20-10
25 g/l Stabilizer-KZP
60 g/l Arkofix-NEC plus
10 g/l Ceraperm-MW liq conc
20 g/l Solusoft-UP
20 g/l Sandolube-SVN
9 g/l Magnesium chloride
Pad with 70 % pick up
Dry at 120°C
Cured at 150°C for 4 minutes.
FINISHING PROCEDURE:

40-80 g/l Arkofix NEC LIQ


6-12 g/l Magnesium chloride
15-20 g/l Solusoft-UP
20 g/l Sandolube-SVN
20 g/l Ceraperm-MW liq conc
Pad cold
Pick up 70-80 %
Shock cure for 20-15 seconds at 170-180°C
Dry at 130°C & cure at 150°C for 3 minutes
Calendar sanforize if necessary
STAGE-1 (RESIN FINISH)
40-60 g/l Arkofix-NEC liq
6-12 g/l Magnesium chloride
20 g/l Ceraperm-MW liq conc
20 g/l Sandolube-SVN
Pad cold with 70-80 % pick up
Shock cure at 170-180°C for 15-20 seconds
STAGE-2 (WASHING)
0.5 g/l Sandoclean PC liq
Open width wash at 40°C
rinse
STAGE-3 (TOP FINISH)
10 g/l Ceraperm-MW
20 g/l Solusoft-UP
0.5 g/l Acetic acid
Pad cold with 70-80 % pick up
Dry at 120°C
Sanforize if necessary.
STAGE 1 (RESIN FINISH)
40-60 g/l Arkofix-NEC
6-9 g/l Magnesium chloride
20 g/l Ceraperm-MW liq conc
20 g/l Sandolube-SVN
Pad cold with 70-80 5 pick up
Shock cure for 20-15 seconds at 170-180°C

STAGE 2 (WASHING OFF)


0.5 g/l Sandoclean PC
open width wash at 40°C
Dry at 120°C
Calendar
Steel on paper roller
160°C,100 daN/cm
Or
Sanforize.
STAGE 1 ( PREFINISH WITH PERMENANT SILICONE SOFTENER)
20 g/l Solusoft-UP
0.5 g/l Acetic acid 60%
Pad with 70-80% pick up
Dry at 130°C

STAGE 2 (RESIN FINISH)

40-60 g/l Arkofix-NEC


6-9 g/l Magnesium chloride
20 g/l Ceraperm-MW
20 g/l Sandolube-SVN
1 ml/l Acetic acid 60%
Pad cold with 70-80% pick up
Dry at 130°C
Cure at 150°C for 4 minutes.
FINISHING PROCEDURE:
4-6 % Milease-T
0.5 % Suprex K 40

Treat at 70°C for 30 minutes


Dry at 120°C

Potrebbero piacerti anche