In the two-pane balancing of a turbine rotor, the data obtained from
measurement of the original unbalance, the right-plane trial weight, and the left plane trial weight are shown below. The vibration displacement amplitudes are in mils (1/1000 inch). Determine the size and location of the required balance correction weights.
S O L U T I O N
*************************************************************** TRIAL RUN No.1: Free-Run *************************************************************** Enter measurements at RIGHT bearing Amplitude measurement = 6.5 Phase measurement = 205 R = -5.8910 - 2.7470i
Enter measurements at LEFT bearing Amplitude measurement = 8.5 Phase measurement = 60 L = 4.2500 + 7.3612i
Right bearing Left bearing Condition Amplitude Phase Amplitude Phase Original unbalance (free run) 6.5 205 o 8.5 60 o
W B =12 oz added at 180 o in the right correction plane 10.5 160 o 6 35 o
W A = 10 oz added at 270 o in the left correction plane 4.5 230 o 6 125 o
*************************************************************** TRIAL RUN No.2 *************************************************************** Measurements due to trial mass at RIGHT plane
Enter value of trail mass at RIGHT plane = 12 Enter angular position of trail mass at RIGHT plane = 180
Enter measurements at RIGHT bearing Amplitude measurement = 10.5 Phase measurement = 160 R2 = -9.8668 + 3.5912i
Enter measurements at LEFT bearing Amplitude measurement = 6 Phase measurement = 35 L2 = 4.9149 + 3.4415i
*************************************************************** TRIAL RUN No.3 *************************************************************** Measurements due to trial mass at LEFT plane
Enter value of trail mass at LEFT plane = 10 Enter angular position of trail mass at LEFT plane = 270
Enter measurements at RIGHT bearing Amplitude measurement = 4.5 Phase measurement = 230 R3 = -2.8925 - 3.4472i
Enter measurements at LEFT bearing Amplitude measurement = 6 Phase measurement = 125 L3 = -3.4415 + 4.9149i
*************************************************************** C O R R E C T I O N M A S S E S *************************************************************** Correction weight to be added in the RIGHT plane: