0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
369 visualizzazioni2 pagine
Viridia 26 / 24 Series is a flexible, bedside monitor for critical and acute care units. It contains a user interface similar to the Standard Control Panel of Viridia CMS / ACMS. Viridia Model 24CT is powered by internal rechargeable batteries or from an AC power connection.
Viridia 26 / 24 Series is a flexible, bedside monitor for critical and acute care units. It contains a user interface similar to the Standard Control Panel of Viridia CMS / ACMS. Viridia Model 24CT is powered by internal rechargeable batteries or from an AC power connection.
Viridia 26 / 24 Series is a flexible, bedside monitor for critical and acute care units. It contains a user interface similar to the Standard Control Panel of Viridia CMS / ACMS. Viridia Model 24CT is powered by internal rechargeable batteries or from an AC power connection.
The HP Viridia 26/24 Series and its family of Viridia products are powerful, flexible patient monitoring systems that provide a wide range of data acquisition and processing functions for all types of patients, in both critical care and routine care settings. Although the Viridia 26/24 Series is highly reliable and easy to use, its high degree of flexibility and functionality may seem daunting to users and technicians who do not work with it on a regular basis. Concepts The HP Viridia 26/24 Series is a flexible, bedside monitor for critical and acute care units, and for patient transport between units (Viridia Model 24CT). It contains a user interface similar to the Standard Control Panel of Viridia CMS/ACMS, and supports a subset of the functionality of the Viridia CMS/ACMS. The Viridia 26/24 Series utilizes an outer housing that resembles the OmniCare CTS, but it contains a simplified hardware architecture, resulting in fewer replaceable parts. Clinical Uses The Viridia 26/24 Series is designed to monitor patients in most critical and acute patient care areas of the hospital as well as in transport situations (Viridia Model 24CT). As a bedside monitor, the Viridia 26/24 Series is most commonly seen mounted to a wall channel with a six- or eight-slot Plug-in Satellite Rack mounted below it. It can also be mounted on a table mount and a roll stand. As a transport monitor (Viridia Model 24CT) a six-slot rack can be docked directly to the mainframe. The Viridia 26/24 Series supports a network connection to the Viridia monitoring network (SDN). The Viridia Model 24 and 24Cs source of power is a local AC power connection. The Viridia Model 24CT is powered by either internal rechargeable batteries or from an AC power connection. Standard Package The Viridia 26/24 Series bedside monitor standard package includes: Mainframe with 9.5 passive matrix monochrome flat panel display (Viridia Model 24); mainframe with 10.4 color flat panel display (Viridia Model 24C/ 24CT) capable of displaying four waveforms simultaneously. Eight-slot Plug-in Satellite Rack with front-end link cable Typical Manufacturers Picture Parameter Modules include: Blood Analysis Module Capnography Cardiac Output Invasive Blood Pressures Noninvasive Blood Pressures Pulse Oximetry Temperature End Tidal C02 Internal Device Interfaces Anesthetic Gas Module Thermal Array Recorder
166 HighlandPark Drive, Bloomfield, CT 06002 U.S.A. Tel: (860) 218-2575 Fax: (860) 218-2565 Email: soma@somatechnology.com Rev 1 1/06 Parameter Modules: predefined combinations of ECG/Resp, NIBP, SPO2, InvPRESS, CO2, VueLink, and Recorder Features The Viridia 26/24 Series has the following general features: Mainframe with monochrome display (Viridia Model 24); mainframe with color display (Viridia Model 24C/24CT/26C/26CT) for display of up to four waveforms Eight-slot or optional six-slot Plug-in Satellite Rack to hold plug-in modules Optional battery operation (Viridia Model 24CT/26CT) All parameter modules supported by HP Viridia CMS and the HP OmniCare Component Transport System (except FiO2, SvO2, and EEG) Network Compatible through the HP Viridia patient care system interface Patient Data Management software which provides 24 hour storage of patient related parameter information ST Segment analysis software oxyCRG display software Extended arrhythmia detection when networked to one of HPs Arrhythmia Systems Allows transfer of patient related settings and transfer of patient cables and lines without recabling or recalibration Mainframe The mainframe contains the display unit and the processing capabilities for the Viridia 26/24 Series. A computer subsystem is responsible for parameter processing, display control, and interfacing. The display section consists of a 9.5 (diagonally measured) monochrome display (Viridia Model 24); mainframe with 10.4 color display (Viridia Model 26C/26CT/24C/24CT). Rack Features There are two rack options for the Viridia 26/24 Series; either the eight-slot or sixslot rack can be used. The standard eight-slot rack attaches to the monitor by a front end cable. It houses up to eight standard single-width Viridia CMS modules. The sixslot rack comes equipped with a standard front- end link connector for attachment to the Viridia 26/24 Series or to other Viridia CMS models. The Viridia Model 26CT/24CT supports docking the six-slot rack directly to the monitor mainframe. Parameter Modules The HP Viridia 26/24 Series provides 6 or 8 slots to support the following parameter modules: HP M1001A/B ECG Maximum of one M1001A or M1002A per monitor. HP M1002A/B ECG/RESP HP M1006A/B Pressure Maximum of three per monitor (bundle specific) HP M1006A/B Option #C01 Pressure Module with Analog Pressure Output Maximum of one per monitor (total of two invasive pressure modules possible) HP M1008A NBP Adult Maximum of one per monitor HP M1008B NBP Adult//Pediatric/Neonatal HP M1012A Cardiac Output Maximum of one per monitor (bundle specific) HP M1015A Side Stream CO2 Maximum of one per monitor (bundle specific) HP M1016A CO2 Maximum of one per monitor (bundle specific) HP M1018A tcpO2/tcpCO2 Maximum of one per monitor - only with Neonatal options HP M1020A SpO2 /PLETH Maximum of one per monitor HP M1022A Blood Analysis Module Maximum of one per monitor (bundle specific) HP M1029A Temperature Maximum of two per monitor (bundle specific) HP M1032A VueLink Maximum of one VueLink A and VueLink B per monitor - except Anesthesia option H03 (VueLink B only) HP M1116A or M1116B Thermal Array Recorder Maximum of one per monitor HP M1026A Anesthetic Gas Module Maximum or one per monitor - only with Anesthesia options
Soma Technology, Inc. acknowledges all registered trademarks of manufacturers listed. The technical data given in this publication are for general information and are subject to change without notice.