Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Carrier I/O
“J1” Differential AMP Differential input
“J1”
U8 Differential AMP Differential input
4 Signals AD7328
4 Channel Differential AMP Differential input
12 bit A
A/D
Differential AMP Differential input
GND,3.3V,5V,12V,-12V
V
5089
medium speed ADCs -40 to +85 degrees C
• 12 bit/250KHz sampling Temperature (Storage):
• 482KHz single pole ana- -55 to +100 degrees C
log input filters. Altitude: Not Specified or
Characterized. Typical similar
• Eight Differential Input channels equipment is at 15,000 ft.
• Differential Input ranges +/- Humidity (Operating/Storage):
2.5V, +/-5.0V, selectable 5% to 90% non-condensing.
• Single Ended Input ranges Vibration: Not specified or
+/-5.0V, +/-10.0V, selectable Characterized.
Shock: Not specified or Char-
• On board serial iden- acterized.
tification circuit
MTBF: Available on request.
• Industrial temperature range
Weight: 3 grams.
• RoHS compliant Power: TBD
• Conformal coating
• Patent pending
Ordering Information
5089: 8-channel, 12-bit Digital
to Analog Converter
140 Mount Holly Bypass
Unit 1
Lumberton, NJ 08048
Tel: 609-267-8988
Fax: 609-261-1011
www.technobox.com
Input Signal Chain. The 5089 uses a 482KHz low pass filtered differential input amplifier to drive an AD7328
medium speed differential input A/D converter.
Differential Inputs. Differential inputs are limited to +/- 5 volts with a common mode of +/- 7.25 volts. Example
Vin- and Vin+ vary between between +12.25V and +2.25V, the middle dashed line represents the common mode
voltage.
Single Ended Inputs. Single ended inputs are limited to +/- 10 volts.