Sei sulla pagina 1di 9

Setting up procedure

Date: March 2006 Document No.: 95+123300






128Kbps ISDN configuration Windows XP



Subject:

This document describes how to connect to the Internet via the Fleet77 128 Kbps ISDN
using Windows XP platform.

The PC communication with the Fleet77 has to be performed with an external modem
attached, 128 Kbps ISDN (2x64 Kbps) can only be performed through the ISDN port (X7) on
the 128Kbps compatible BDU. Recommended modems can be found in Accredited
Solutions.


Priority:

LOW: For information purpose only no direct action needed!


Action:

Follow the steps below to set-up the modem under Windows XP and perform the
connection.

1. Install the external modem according to the description of the modem
manufacturer.

2. Open Control Panel by left-clicking Start and select Control Panel.







3. Select Network Connections.



4. Select Create a new connection.

Techni cal Not i f i cat i on XXXXX Page 2/ 9





5. Press Next>.




6. Select Connect to the Internet and press Next>.

Techni cal Not i f i cat i on XXXXX Page 3/ 9





7. Select Set up my connection manually and press Next>.




8. Select Connect using a dial-up modem and press Next>.

Techni cal Not i f i cat i on XXXXX Page 4/ 9





9. Select your installed modem (in this case the two ISDN channel USB Light
Rider 128K WAN TAPI Miniport) and press Next>.
Note ! Remember to select (tag) both channels for the installed modem.



10. Enter a suitable name for the connection and press Next>.

Techni cal Not i f i cat i on XXXXX Page 5/ 9





11. Enter the phone number to your Internet Service Provider or to the Internet
gateway at your LES (please remember in both cases the # after the phone
number) and press Next>.
Note ! If you are adding 906 in front of the phone number (like here), this will
always command the call to be performed as a 2x64Kbps ISDN connection, no
matter the routing for the Fleet terminal.
Note ! If running 2x56 ISDN connection the prefix number to forces this service
is 907.



Techni cal Not i f i cat i on XXXXX Page 6/ 9



12. Select as you please and press Next>.



13. Enter a User name and Password (provided by your Internet Service Provider or
the LES, if needed) and press Next>.



14. Tag the Add a shortcut to this connection to my desktop, end the setup of
connection by pressing Finish.

Techni cal Not i f i cat i on XXXXX Page 7/ 9





15. Select (double-click) your Dial-up icon for the 128K ISDN connection created
above.



16. Select Dial.



17. The PC is dialing up to the Internet gateway or Internet Service Provider.



18. When the connection is made on the first 64K ISDN channel, username and
password is being validated.

Techni cal Not i f i cat i on XXXXX Page 8/ 9





19. The computer is being registered at the network.



20. The connection on first channel is made and bundling first and second 64K ISDN
channel is being done.



21. Connection is now up running at 128Kbps. The Browser, E-mail program or other
programs can be opened, the Internet is available.

Thrane & Thrane
After Sales Service
Information in this document is subject to change w thout notice i
and does not represent a commitment on the part of Thrane & Thrane A/S.
2005 Thrane & Thrane A/S. All rights reserved.
Printed in Denmark.
Techni cal Not i f i cat i on XXXXX Page 9/ 9

Potrebbero piacerti anche