0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
44 visualizzazioni40 pagine
TSFP Bill of Quantities bid DOCUMENT for CIVIL WORKS for FOUNDATIONS of EQUIPMENT and PLANT BUILDINGS. The quantities given in the Bill of Quantities are estimated and provisional. The basis of payment will be the actual quantities of work ordered and carried out.
TSFP Bill of Quantities bid DOCUMENT for CIVIL WORKS for FOUNDATIONS of EQUIPMENT and PLANT BUILDINGS. The quantities given in the Bill of Quantities are estimated and provisional. The basis of payment will be the actual quantities of work ordered and carried out.
TSFP Bill of Quantities bid DOCUMENT for CIVIL WORKS for FOUNDATIONS of EQUIPMENT and PLANT BUILDINGS. The quantities given in the Bill of Quantities are estimated and provisional. The basis of payment will be the actual quantities of work ordered and carried out.
CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 1/40 1 2 3 4 5 6 7 8 9 (a) (b) 10 A. PREABLE The Bill of Quantities shall be read in conjunction with the Instructions to Bidders, General Conditions of Contract, Conditions of Particular Application, Technical Specifications, and Drawings. The quantities given in the Bill of Quantities are estimated and provisional, and are given to provide a common basis for bidding. The basis of payment will be the actual quantities of work ordered and carried out, as measured by the Contractor and verified by the Engineer and valued at the rates and prices bid in the priced Bill of Quantities, where applicable, and otherwise at such rates and prices as the Engineer may fix within the terms of the Contract. The rates and prices bid in the priced Bill of Quantities shall, except insofar as it is otherwise provided under the Contract, include all Constructional Plant, labour, supervision, materials, erection, maintenance, insurance, profit, taxes, and duties, together with all general risks, liabilities, and obligations set out or implied in the Contract. where there is a discrepancy between amounts in figures and in words, the amount in words will govern; and
The method of measurement of completed work for payment shall be in accordance with methods indicated in Specifications and more specifically as provided in the Standard Method of Measurement of the U.K. Institution of Civil Engineers for details refer website www.ice.uk. Errors will be corrected by the Employer for any arithmetic errors in computation or summation as follows: where there is a discrepancy between the unit rate and the total amount derived from the multiplication of the unit price and the quantity, the unit rate as quoted will govern, unless in the opinion of the Employer, there is an obviously gross misplacement of the decimal point in the unit price, in which event the total amount as quoted will govern and the unit rate will be corrected. The whole cost of complying with the provisions of the Contract shall be included in the Items provided in the priced Bill of Quantities, and where no Items are provided, the cost shall be deemed to be distributed among the rates and prices entered for the related Items of Work. General directions and descriptions of work and materials are not necessarily repeated nor summarized in the Bill of Quantities. References to the relevant sections of the Contract documentation shall be made before entering prices against each item in the priced Bill of Quantities. Provisional Sums, if included and so designated in the Bill of Quantities shall be expended in whole or in part at the direction and discretion of the Engineer in accordance with Sub-Clause 13.5 of Part I of the Conditions of Contract. A rate or price shall be entered against each item in the priced Bill of Quantities, whether quantities are stated or not. The cost of Items against which the Contractor has failed to enter a rate or price shall be deemed to be covered by other rates and prices entered in the Bill of Quantities. Rock is defined as all materials that, in the opinion of the Engineer, require blasting, or the use of metal wedges and sledgehammers, or the use of compressed air drilling for their removal, and that cannot be extracted by ripping with a tractor of at least 150 brake hp with a single, rear-mounted, heavy-duty ripper. TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 2/40 1 Bill No. 1 - Site Clearance Bill No. 2 - Earth Work Bill No. 3 - Cement Concrete Work Bill No. 4 - Formwork Bill No .5 - Reinforcing Steel Bill No. 6 - Masonry and Allied Works Bill No. 7 - Plastering Work Bill No. 8 - Floor Finishes and Allied Works Bill No. 9 - Structural Steel Bill No. 10 - Mild Steel / Galvanised Iron Insert and Holding down Bolts Bill No. 11 - Doors, Windows and Ventilators Bill No. 12 - Grills, Rolling Shutter, Collapsible Steel Shutter & Hand Railing Bill No. 13 - Roofing Bill No. 14 - Finishing Bill No. 15 - Water Proofing Bill No. 16 - Sanitary and Water Supply Bill No. 17 - Sewerage and Drainage Bill No. 18 - Miscellaneous Bill No. 19 - Road Works Bill No. 20 - Electrical Bill No. 21 - General Items
2 B WORKS ITEMS The execution of job FOR PLANT BUILDINGS AND FOUNDATIONS OF EQUIPMENT contains the following Bills under it, which have been grouped according to the nature or timing of the work: Bidders shall price the Bill of Quantities in local currency only and shall indicate in the Appendix to Bid the percentage expected for payment in foreign currency or currencies. TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 3/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount 1 SITE CLEARANCE 1.01 Removal of trees, bushes, other vegetation etc. all stumps & roots 50mm diameter & upto 500mm diameter to a depth not less than 1000mm below the N.G.L., including remaining of all rubbish and other objectionable materials, backfilling in cavities, including disposal of the unusable material upto a distance of 1.00 km as directed by the Engineer. hectare 80 1.02 Removal of trees & stumps for large diameter including disposal upto a distance of 1.00 km. a) Girth exceeding to 500mm upto 1000mm each 150 SUB TOTAL BILL NO. 1 BILL NO.1 B 1 WORK ITEMS PLANT BUILDINGS AND FOUNDATIONS OF EQUIPMENT BILL OF QUANTITY TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 4/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount 2.0 EARTHWORK 2.01 (a) Excavation for foundations, substructures, trenches, sumps, tunnels, pits etc in all type of Ordinary, sandy, gravelly, slushy, marshy soil including necessary stacking of selected materials for refilling and disposing excess materials within an initial lead of 500 m complete as per specification mentioned in Ethiopian Building Code Standard- 7-1995-5.1 and drawing and also including the practical steps for safety purpose to depths from Natural Ground level (I) 0.00 m to depth 1.50 m cum 177000 55000 (ii) 1.50 m to depth 3.00 m cum 64500 15000 (iii) 3.00 m below and for every 1.50 m and part thereof cum 17000 500 2.01 (b) Same as Item No. 2.01 (a) but for hard soil, as defined in EBCS-7 Article 3.6.2 (I) 0.00 m. to depth 1.50 m. cum 1000 500 (ii) 1.50 m to depth 3.00 m cum 400 300 (iii) 3.00 m below and for every 1.50 m and part thereof cum - 2.01 (c) Extra over Item No. 2.01 (a) and 2.01 (b) but for providing temporary shoring and strutting including dewatering cum 10000 2.02 Disposal of surplus excavated material for every additional lead of 50 m or part thereof beyond the initial lead of 0.50 km including loading unloading, transportation, dressing, etc. complete. cum / km 50000 30000 2.03 Backfilling around trenches, foundations, sumps, pits, substructure with compaction upto 95% proctor density for cohesive soil and 100% of the proctor density for non-cohesive soil of backfilling in layers not exceeding 250 mm in depths, complete in all respect. BILL NO. 2 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 5/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount (a) With selected excavated earth cum 91700 34000 (b) With selected earth brought from outside from approved borrow pits including its procurement and transportation etc. complete cum 5000 1000 (c) With fine sand brought from outside from approved borrow pits including its procurement & transportation etc. complete. cum 500 400 2.04 Same as Item No. 2.03 but for filling in plinth : (a) With selected excavated earth cum 95000 10500 (b) With selected earth brought from outside from approved borrow pits including its procurement and transportation etc. complete cum 83000 45000 (c) With fine sand brought from outside from approved borrow pits including its procurement & transport etc. complete. cum 10000 1000 2.05 Procuring, furnishing and laying of 150mm thick hand packed boulder soling with stone size 50mm to 100mm on levelled & compacted earth and filling the voids with crushed stone aggregate and course sand etc. as per specification and directed by Engineer and also consolidation with 8-10 ton capacity road roller etc. all complete measurement to be taken for 150mm compacted thickness only. cum 8000 850 2.06 Procuring, furnishing and applying of chlordane emulsifiable or equivalent concentrates with 1% concentration and @ 7.5 lit/sqm to create a chemical barrier under and trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, surrounding pipes, waste conduits etc. complete for pre and post constructional anti- termite treatment. sqm 35000 SUB TOTAL BILL NO. 2 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 6/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount BILL NO. 3 3.0 CEMENT CONCRETE WORK 3.01 Procuring, furnishing, transporting and pouring of plain cement concrete in all kinds of work below plinth and upto all depth excluding formwork including ramming, levelling, vibrating, curing etc. complete in all respect as specified in EBCS-2, 2.2. (a) Concrete grade of mix C-5 Class I cum 14500 4650 (b) Concrete grade of mix C-15 Class I cum 250 150 3.02 Same as Item No. 3.01 but for above plinth level at heights upto 10.00 m from 00.00 m level. (a) Concrete grade of mix C-15 Class I cum 200 150 3.03 Procuring, furnishing, transporting and pouring of Re-inforced cement concrete in all kinds of work upto 5.00 m below grade level and upto plinth level but excluding reinforcement work & formwork but including ramming, compaction, levelling, finishing, curing etc. complete (concrete for liquid retaining structures and others as called for shall be water tight) confirming to EBCS-2 2.2. (a) For grade of concrete C-20 Class I cum 63650 31000 (b) For grade of concrete C-25 Class I cum 10200 8200 3.04 Same as Item No. 3.03 but work upto +10.00 m LvL from 00.00 m LvL including making scaffolding, gangway etc. all complete. (a) For grade of concrete C-15 Class I cum (b) For grade of concrete C-20 Class I cum 15500 300 (c) For grade of concrete C-25 Class I cum 400 300 (d) For grade of concrete C-30 Class I cum 3.05 Extra over Item No. 3.05 for pouring concrete above 10.00 m for every additional 5.00 m or part thereof. (a) For grade of concrete C-20 Class I cum 2000 500 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 7/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount (b) For grade of concrete C-25 Class I cum 250 3.06 Procuring, furnishing, transporting, placing of cement concrete grade C-25 class-I in coping, bed blocks, window sills etc. not exceeding the plan area 0.50m 2 /m excluding the cost of formwork but including finishing, scaffolding, curing etc. complete at all heights & levels. sqm 500 200 3.08 Procuring, Furnishing, transporting, aligning, levelling and fixing in position of pre cast Units- concrete of Grade C-20, Class I including formwork to finish surface, pouring, Curing, protecting under appropriate condition, erecting in level and position, etc complete in all respect, but excluding reinforcing steel (Reinforcing steel, edge angle, inserts shall be paid separately in their respective item). (a) cover for trenches, Sumps, Pits, and Manholes etc. cum 200 - (b) Perforated slab of any thickness with 25 dia holes @ 150mmc/c both ways as per drawing. cum 1020 - SUB TOTAL BILL NO. 3 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 8/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount 4.0 Bill No. 4 4.01 Procuring, furnishing, transporting, erecting & removal of straight/Plain Formwork including centering, shuttering for concrete items including forming chamfers, drip moulds etc. and including scaffolding staging, complete to obtain a smooth finish surface after striking out the formwork etc. complete (staging / scaffolding height is upto 5.00 m) conforming to EBCS-2, 8.4.6. (a) For non-exposed surfaces below plinth level at all depth sqm 219000 38500 (b) For exposed surfaces above plinth level in all height. sqm 110400 28300 4.02 Procuring, furnishing, transporting, erecting & removal of circular and / or curved surface formwork including centering, shuttering for concrete items including forming chamfers, drip moulds etc. and including scaffolding staging, complete to obtain a smooth finish surface after striking out the formwork (staging / scaffolding height is upto 5.00 m) conforming to EBCS-2, 8.4.6. (a) For non exposed surfaces below plinth level at all depth sqm 5000 2000 (b) For exposed surfaces above plinth level in all height sqm 65500 1000 4.03 Extra over Item No. 4.01 (b) & 4.02 (b) for additional scaffolding and staging height of every 5.00 m or part thereof (only plan area of concrete surface will be measured) sqm 12000 300 4.04 Procuring, furnishing, transporting, mixing etc of approved quality of admixture as water proofing element in concrete / plastering work (as per manufacturer specification) kg/bag of cement 8400 3000 4.05 Procuring furnishing transporting erecting and removal of conical shape of formwork in cladding cantering shuttering for concrete items, including forming champers, drip marble etc. and including scaffolding staging complete to obtain a smooth finish surface after striking and the form work confirming to EBCS 2,8.4.6 (a) For exposed surfaces above plinth level up to a height of 10mtr. sqm 500 500 BILL NO. 4 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 9/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount 4.04 Procuring, furnishing, transporting, erecting & removal of Formwork including centering, shuttering for Concrete Items for making blockouts, cutouts etc and including scaffolding, staging, finishing in concrete surface after striking out the formwork etc. complete sqm 2000 1000 SUB TOTAL BILL NO. 4 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 10/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount BILL NO. 5 5.0 REINFORCING STEEL 5.01 Procuring, furnishing, transporting, cleaning, cutting bending and binding with 1.6 mm annealed wire and placing in position on/at all heights & depths and location as per drawing including handling etc complete. (a) High yield strength deformed reinforcement bars confirming to AASHTO M31 (ASTM A615) t 7500 2800 (b) Hard drawn mild steel reinforcement bars conform to BS4482 and/or AASHTO M55 t SUB TOTAL BILL NO. 5.0 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 11/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount BILL NO. 6 6.0 MASONRY AND ALLIED WORKS 6.01 Procuring, furnishing, transporting, laying in position of cement block masonry work of 400x200x200mm size with (1st quality) brick class (75) designated in foundation in any depth and upto plinth including curing racking of joints, scaffolding etc. complete in all respect (a) With cement mortar 1:6 ( 1 part of cement : 6 part of course sand) cum 4250 1300 (b) With cement mortar 1:4 ( 1 part of cement : 4 part of course sand) cum 200 200 6.02 Same in Item No. 6.01 but in superstructure I.e. above plinth level upto a height of 10.00 m. Including staging, making gangway etc. complete in all respect (a) With cement mortar 1:6 ( 1 part of cement : 6 part of course sand) cum 6850 2000 (b) With cement mortar 1:4 ( 1 part of cement : 4 part of course sand) cum 200 6.03 Procuring, furnishing, transporting, laying in position of 200 thick cement block of 400x200x200mm size masonry work with (1st quality) brick class (75) designated in foundation in any depth and upto plinth including curing, raking of joints, scaffolding etc. complete in all respect (a) With cement mortar 1:4 ( 1 part of cement : 4 part of course sand) sqm 1500 500 (b) With cement mortar 1:3 ( 1 part of cement : 3 part of course sand) sqm 6.04 Same in Item No. 6.03 but in superstructure i.e. above plinth level upto a height of 10.00 m. Including staging, making gangway etc. complete in all respect (a) With cement mortar 1:4 ( 1 part of cement : 4 part of course sand) sqm 200 100 (b) With cement mortar 1:3 ( 1 part of cement : 3 part of course sand) sqm 50 50 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 12/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount 6.05 Extra over Item No. 6.02 beyond initial height of 10 m and for additional height of every 5.00 m and part thereof including all staging, scaffolding, making gangway etc. complete in all respect cum 100 50 6.08 Procuring, furnishing, transporting, cleaning the surface and laying of 50 mm thick damp proof course in cement concrete grade C-25 class-I with minimum 2% admixture of liquid integral water proofing compound or equivalent and a layer of minimum 6 mm thick of bitumen layer (bitumen confirming to RC-70 complying with AASHTO M-81 or M-82 or equivalent. sqm 200 100 6.09 Procuring, furnishing, transporting laying in position circular shape Honey comb concrete block masonry with size A (400mmx 300mmx 200mm) or size B (400x 200x 200mm) blocks, with min density of 1500 kg/cum and min crushing strength of 50 kg/sqcm, in foundation at any depth and upto plinth including curing, raking of joints, scaffolding etc. complete in all respects (a) With Cement mortar 1:6 (1 part of cement: 6 part of course sand cum 150 100 (b) With Cement mortar 1:4 (1 part of cement: 4 part of course sand cum 100 50 SUB TOTAL BILL NO. 6 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 13/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount BILL NO. 7 7.0 PLASTERING WORK 7.01 Procuring, furnishing, transporting, mixing & laying of plain cement plaster at interior faces with cement mortar proportion of 1:4 ( 1 part of cement and 4 part of course sand) including jams, cills, corners etc. complete and including finishing, curing, scaffolding at all heights and depths. (a) 12 mm thick sqm 45100 5600 7.02 Same as item No. 7.01 but for exterior plaster upto height of 10 m from 00.00 m including all staging, curing, scaffolding, making gangway etc. complete (a) 15 mm thick sqm 31000 600 7.03 Procuring, furnishing, transporting, mixing and applying of plain cement plaster 1:3 ( 1 part of cement & 3 part of course sand) in ceilings including corners finishing etc. and also including scaffolding, staging, curing etc. complete in all respect (a) 6 mm thick sqm 2500 2400 7.04 Procuring, furnishing, transporting, mixing and applying of cement plaster in 2 coats under layer of cement mortar 1:5 (1 part of cement & 5 part of course sand) and upper layer with cement mortar is 1:3 (1 part of cement & 3 part of course sand) in outer periphery including all corners, jams sills, finishing etc complete and also including scaffolding, staging, curing etc. complete in all respect upto a height of 10.00 m from floor finish level. (a) 18mm thick - 12mm thick + 6mm thick (under layer & upper layer respectively sqm 7500 3000 (b) 20mm thick - 12mm thick + 8mm thick (under layer & upper layer respectively sqm 7.05 Extra over Item No. 7.02 & 7.04 for every additional 10.00 m height and part thereof after the initial height of 10.00 m. Including all scaffolding, staging etc. complete in all respect sqm 1600 700 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 14/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount 7.06 Extra over Item No. 7.01, 7.02 & 7.03 for laying of 2 mm thick neat cement finishing on plastered surface at all heights & depths including scaffolding, staging, curing etc. complete in all respect sqm 5000 2000 SUB TOTAL BILL NO. 7 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 15/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount BILL NO. 8 8.0 FLOOR FINISHES AND ALLIED WORKS 8.01 Procuring, furnishing, mixing and laying of cement concrete granolithic finish with C-20 grade of concrete finished with a floating coat of neat cement including all finishing, curing etc. complete at all heights & depths (a) 50 mm thick with 20mm & down nominal size of aggregate sqm 4000 1300 (b) Extra over Item No. 8.01 (a) for additional thickness of every 25mm thickness and part thereof (Excluding the cost of floating coat, finishing, curing etc. because these are already include in Item No. 8.01 (a) sqm 1500 1000 8.02 Same as Item No. 8.01 but for 50mm thick with ready mix concrete hardener topping or equivalent (non-metallic dry shake type) of approved manufacturer and as per manufacturer specification including all finishing, curing etc. complete at all heights & depths complete sqm 1500 300 8.03 Procuring, furnishing, mixing and making cement plaster skirting (upto 300 mm in high) with cement mortar 1:3 ( 1 part of cement & 3 part of course sand) finished with a floating coat of neat cement of 2mm thick including fixing, curing etc. complete at all heights & depths sqm 50 50 8.04 Procuring, furnishing, mixing and laying of reinforced cement concrete floor with C-20 grade of Class-I concrete including cost of formwork but excluding reinforcement work (which is payable separately in respective item) complete in all respect including finishing, curing etc. complete. (a) 75mm thick with 20mm and down nominal size sqm 500 500 (b) 100mm thick with 20mm and down nominal size sqm 65000 8500 (c) 150mm thick with 20mm and down nominal size sqm 34000 16200 8.05 Extra over Item No. 8.01 & 8.04 but for staircase trades and risers not exceeding the width 300mm including cost of nosing, moulding etc. complete sqm 1500 350 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 16/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount 8.06 Extra over Item No. 8.04 but for trimix flooring by using Power trowel, power disc and vacuum dewatering system complete as per specification sqm 180000 130000 8.07 Extra over Item No. 8.01 but for using of non metallic dry shake type floor hardener or equivalent. sqm 180000 130000 8.08 Procuring, furnishing, transporting, laying and constructing of Bricks on edge flooring with dry bricks class designated 75 including and voids filling with fine sand etc complete in all respect including curing. sqm 167000 135000 8.09 Procuring, furnishing, transporting, laying and constructing of dry flat Brick soling with dry bricks class designated 75 including voids filling with fine send etc complete in all respect including curing. sqm 32000 500
8.10 Extra over Item no 8.09 and 8.10 but for using the bricks laid down in diagonal herring Bone bond and other pattern as specified or directed by engineer sqm 47000 135000 8.11 Procuring, furnishing, transporting and laying cavity false floor constructed of 600x600mm panel made from 35 mm thick particle board faced of top with 2 mm thick vinyl P.V.C tile as per B.S __ including ramps and steps supported over pedestal jacks capable of carrying the total load coming other floor as per drawing and specification total height of 1500 mm under side of board to be painted with two coats of fire resistant paint over a cost of approved primer including in asking necessary modification and cutouts in to panels and providing necessary additional support as per specification and drawings. sqm 500 500 8.12 Procuring, furnishing, transporting and laying acid and alkali resistant tiles 10 mm thick of approved make and colour at various elevations using acid/alkali resisting mortor bedding and jonts filled with acid resisting cement all as per manufactures specification and B.S. code ___ and with all analerial & complete as directed by engineer in - charge (a) In flooring on 10 mm thick C.M. (1:4) sqm 100 50 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 17/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount (b) Do but in dado on 12 mm thick (1:3) plaster sqm 70 50 8.13 Procuring, furnishing, transporting and laying on horizontal or inclined surfaces flooring for open pits consisting of later on flat bricks with joints filed with fine sand underlain by 350 microns LDPE (Low Density Polyvinyl Ethylene) welded as per manufacturers specifications laid over a layer of flat bricks with joints filed with fine sand etc completed. sqm 32000 8.14 Procuring, furnishing, transporting and laying 50 mm thick bitument mastic wearing course (as per secifications) with industrial of grade 85/25 confirming B.S prepared try using mastic cooker and laid to required level and slope including providing anti skid surface with bitumen precoated fire grained hard stone chipping of approved size at the rate of 0.005 cum per/sqm and at approx. spacing of 10 cm c/c in both directions, pressed in to surface protruding 1 mm to 4 mm over mastic surface including cleaning the surfece, removal of debris etc. all complete. sqm 400 SUB TOTAL BILL NO. 8 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 18/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount BILL NO. 9 9.0 STRUCTURAL STEEL 9.01 Procuring, furnishing, transporting and fabricating (as per approved drawing) by cutting, welding etc. complete of structural steel confirming to AASTHOM270 grade 250 or BS 4360 fixed with connecting plates and accessories etc. complete including chipping of welding plugs etc. including the cost of detailing all consumables, tools, plants etc. complete. (a) For single section t 2300 500 (b) For M.S. Plates t 460 400 (c) For Castellated Section t 100 75 (d) For Hollow / Tubular Section t (e) For Chequered plate t 175 9.02 Extra over Item No. 9.01 but for erecting, positioning, aligning etc. complete by means of welding / bolting etc. including consumables, tools, plants etc. complete in all respect at all heights & depths. t 2860 975 9.03 Extra over Item No. 9.01 but for 1 (one) coat of shop paint with approved red oxide zinc chromate paint including cleaning the surface free from rust and other unwanted material etc. complete. t 2860 975 9.04 (a) Procuring, furnishing, transporting and fabricating (as per approved drawing) by cutting, welding, pressing etc. complete with cold formed structural steel sections properties confirming to EBCS-3, 3.2.3 including the cost of all consumables, tools, planting etc. complete. ? (b) Extra over Item No. 9.04 (a) but for erecting, posting aligning etc. complete by mean of welding, bolting, reverting etc. including consumables, tools, plants etc. complete in all respect at all heights & depths. t ? TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 19/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount 9.05 Procuring, furnishing, fabricating, erecting in position of MS grating as per approved drawing, design and fixing by clamps or by weld etc. including cleaning and preparing the surface including applying of two coats of approved quality of red oxide zinc chromate paint (one shop coat and one after erecting in position) etc Complete in all respect (a) For floors kg 1000 500 (b) For stairs treads kg 1000 500 SUB TOTAL BILL NO. 9 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 20/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount BILL NO. 10 10 MILD STEEL / GALVANISED IRON INSERT AND HOLDING DOWN BOLTS 10.01 Procuring, furnishing and fabricating by cutting, welding, threading etc. complete (Mild Steel Structural Steel Confirm to AASTHO M-270 grade 250 or Bs 4360 and for Bolts & Nuts ASTMAA 307 and galvanizing in accordance with ASTMA 641 with class 3 coating. (a) Mild Steel Inserts kg 826000 64900 (b) Mild Steel holding down bolts including nuts & washers kg 6000 6550 (c) Galvanized Iron holding down bolts including nuts & washers kg (d) Extra over Item No. 10.01 (a) but for Galvanizing detail conforming to AST MA641 Class 3 coating with 120 gm/m 2 kg 10.2 Extra over Item No. 10.01 but for erecting, positioning, aligning etc. complete by means of welding / bolting etc. including consumables, tools, plants etc. complete in all respect at all heights & depths kg 832000 71450 SUB TOTAL BILL NO. 10 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 21/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount BILL NO. 11 11.0 DOOR, WINDOWS AND VENTILATORS 11.01 Procuring, furnishing, transporting, fabricating & fixing of Door/Window framing in line & level & aligning the same made out of the Pre-stressed steel frames with 1.25mm thick sheet including filling C-15 grade concrete Class-II in hollow portion of framing including architecture cutting, rebating, welding wherever required and two coat of preservative paint to the wall face of approved quality and also including 3 nos. of hold fast made out & 40mm x 6mm x 225mm long by cutting & making of brick work / concrete and make good the same in each face in all respect. (a) (I) 105 x 60m single riveted m 2515 500 (ii) 150 x 60m double riveted m 270 150 11.02 Procuring, furnishing, transporting and fixing of wooden flush shutters (single or double leaf) in line, level, aligning the same including architrative cutting including approved quality of copper oxidized brass heavy duty fastenings and fixture like hinges, tower bolts, aldoprs, handles, door stoppers etc. complete in all respect (as per specification & as approved by Engineer) (a) Both side with commercial ply & 2m thick laminated of approved shade sqm 200 100 (b) Both side commercial ply with approved shade of synthetic enamel paint / oil paint sqm 11.03 Procuring, furnishing, transporting, fabricating, fixing and aligning of standard rolled steel section Door, Windows, ventilator etc. as per joints mitered and welded including a coat of approved brand steel Red oxide Zinc chromate paint with metal bidding of 6mm sq. including the following Heavy duty brass Oxidised fittings & fixtures but excluding glazing (All material to be procured after approval of Engineer) (a) For Doors (Single or double leaf) door windows sqm 35 20 (b) For Windows & Ventilators: (I) Side hung type sqm 81 50 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 22/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount 11.04 Procuring, furnishing, transporting, fabricating, fixing in position & aligning of aluminium doors / windows, ventilators etc. by 100mm x50mm x4mm rectangular tubes conforming to 3.07 kg/m for frames and 50mm x 25mm x 2.5mm tubes for panels @ 0.929 kg/m including architectural cutting, fixing of floor springs, hinges, handles, stay etc. complete in all respect. But excluding glazing in all heights & depths as approved by Engineer. (a) For fixed type (I) Door/windows/ventilator sqm 300 100 (b) For openable type (I) Door/windows/ventilator sqm 490 290 11.05 Extra over Item No. 11.03 & 11.04 but for glazing work as approved make by Engineer including glass panes, glazing clips and metal sash putty etc. all complete (i) 5.5mm thick glass sqm 900 11.06 Procuring ,furnishing, transporting, and fixing in position of best quality of hydraulic Door closures including all screws nuts etc complete in all respect each 40 20 11.07 Procuring ,furnishing, transporting, and fixing in position of best quality of mortice door lock vertical type (a) Mortice type door handle each 20 10 (b) Knob type door handle each 20 10 11.09 Procuring, furnishing, transporting, and fixing in position of best quality of 12mm thick pre laminated medium density (exterior grade) particle board Grade 1 bonded with Phenol formaldehyde synthetic resin, of approved brand and manufacturer in panelling fixed in doors/windows and partition frames with chromium plated brass /stainless steel screws etc complete in all respect as per drawing or as directed by Engineer. (a) Pre- laminated board with decorative lamination on both side sqm 55 35 SUB TOTAL BILL NO. 11 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 23/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount BILL NO. 12 12.0 GRILLS, ROLLING SHUTTER, COLLAPSIBLE STEEL SHUTTER & HAND RAILING 12.01 Procuring, furnishing, transporting, fixing and aligning of collapsible steel shutter with vertical channels of 20mm x 10mm x 3mm and braced with flat iron diagonals of 20mm x 5mm size with top & bottom rail of 'T' section 40mm x 40mm x 6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stopper, handles including one coat of approved red oxide Zinc chromate paint complete (only opening area to be measured for payment). sqm 150 50 12.02 Procuring, furnishing, transporting, fixing & aligning of rolling shutter made out of 1.25mm steel sheet for curtain / laths inter locked together through their entire length, and jointed together at the end by end locks, mounted on specially designated shaft with brackets side guides, arrangement for locking from both sides including the cost of necessary long wire springs, Mild Steel Top cover with side blocked of 2mm thick Mild Steel sheet with a coat of approved brand of steel red oxide zinc chromate paint all complete. (a) Pull & Push type sqm 150 50 (b) Gear operated with gear box, crank handle on in as well as out side. sqm 500 150 12.02 (I) Extra for grilled rolling shutter manufactured of 8mm dia Mild Steel bar instead of Laths / Curtains (Only area of Grill opening to be measured) sqm 12.03 Procuring, furnishing, transporting, fixing and aligning of Mild Steel grill made out Mild Steel flat, Mild Steel bar or Mild Steel sq. bar as per drawing and as approved by Engineer including cutting, bending welding grouting in position etc. complete including one coat of approved make Zinc chromate Red oxide paint etc. complete kg 500 300 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 24/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount 12.04 (a) Procuring, furnishing, fabricating and fixing of Mild Steel pipe railing as per drawing & design or as directed by Engineer including, cutting, grinding, welding / bolting the joints and pipe to give as even and smooth shape, drilling holes or grouting in RCC / brick structure, fixing of Mild Steel Dash fastener of required size including two or more coat of synthetic enamel paint over a coat of approved red oxide zinc chromate paint etc. complete including supply of pipes bends, tees etc. complete. (b) With vertical pipe 40 dia NB @ 900 centre to centre 900mm high and horizontal pipes of 32 dia NB @ 300mm centre to centre. m 2500 1000 (c) Same as Item No. 12.04 (a) but using Stainless pipe as per International Standard. m 500 500 SUB TOTAL BILL NO. 12 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 25/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount BILL NO. 13 13.0 ROOFING 13.01 Procuring, Furnishing, transporting, fabricating, fixing in position, aligning of colour coated steel sheet 0.65 mm thick for cold rolled steel, EBCS-3-8.2.3 for Galvanizing & ASTMA 641 Class 3 coating for colour coated sheet of 250 (N/m2) with 120 gm/m2 coats. Including fixing with hex head self drilled screws, with neoprin washer and nylon caps etc. complete in all respect at all heights & depths for flat roofs, slope roof, side cladding etc. complete including all accessories like ridgecover, corner flashing apron cover, north light as per drawing etc. and colour as approved by Engineer-in- charge. sqm 90000 14000 13.01 (a) Same as Item No. 13.01 but for gutters as per drawing formed out of 0.80mm thick with hex head self drilled screws, neoprin washer, nylon caps etc. complete in all respect. (I) Upto 400mm girth m 500 100 (ii) Extra over Item No. 13.01(a) (I) beyond 400mm girth but for every 200mm girth or part thereof. m 200 75 13.02 Procuring, furnishing, transporting, fixing in position, aligning of tiles / plank ceiling with clip system including ceiling braches suspended angle, runner holding clamp, edge profile, recess / flush profile, suspension 'T' etc. complete in all respect with all scaffolding, tools, plants etc. at all heights & depths by the following tiles / plank including cutting of cutouts & extra reinforced to the cutouts etc. complete. All material shall confirming to AA-3105 powder coating (colour as desired by Engineer) (a) Wet formed mineral fibre 14mm to 16mm thick sqm 5000 2000 SUB TOTAL BILL NO. 13 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 26/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount BILL NO. 14 14.0 FINISHING 14.01 GLAZED CERAMIC TILES 14.01 (a) (I) Procuring, furnishing, transporting, fixing and aligning in Line, Level and plumb of Glazed ceramic tiles of 1st Quality upto the size of each tiles of 100mm x 100mm to 300mm x 250mm of minimum thickness of 6mm of approved quality and make by Engineer in all colour, shades and brand in floor, platforms, trades, riser, skirting, dodo's walls etc. complete including bed plaster of 12mm thick to 20mm thick of mortar ratio 1:3 (1 part of cement :3 part of course sand) and jointing with gray cement slurry @ 3.30 kg/sqm including pointing with white cement mix with approved shade pigment including scaffolding, curing etc for all heights, levels & depths cutting / chipping wherever required for hushing with wall / floors etc. complete. sqm 5700 150 14.01 (a) Same as Item No. 14.01 (a) (I) but for 'VITRIFIED' type glazed ceramic tiles of 1st quality. sqm 1200 100 14.01 (b) Procuring , furnishing, transporting, laying and fixing in position ACID/ALKALI Resistant tiles 10mm to 25mm thick of approved make and colour at various elevations, using acid/alkali resisting mortar bedding and joints filled with acid resisting cement as per manufacturers specifications etc complete in all respect (I) In flooring with 10mm to 25mm thick cement mortore1: 4 sqm 2000 1000 (ii) In Wall/As skirting with 12mm to 20mm thick (1:3) cement plaster sqm 500 400 14.02 PAINTING 14.02 (a) TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 27/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount (I) Procuring, furnishing, transporting, fixing and aligning in line, level and plumb of Glazed ceramic tiles of 1st Quality upto the size of each tiles of 100mm x 100mm to 300mm x 300mm of minimum thickness of 6mm of approved quality and make Approved by Engineer in all colour, shades and brand in floor, platforms, trades, riser, skirting, dodo's walls etc. complete including bed plaster of 12mm thick to 20mm thick of mortar ratio 1:3 (1 part of cement :3 part of course sand) and jointing with gray cement slurry @ 3.30 kg/sqm including pointing with white cement mix with approved shade pigment including scaffolding, curing etc for all heights, levels & depths cutting / chipping wherever required for making the surface of tile flush with wall / floors etc. complete. sqm 1000 700 (ii) Oil bound distemper / acrylic washable distemper sqm 1500 1000 (iii) Acrylic emulsion sqm 600 500 (iv) Synthetic enema sqm 600 600 (v) White wash 20000 3600 14.02 (b) Procuring, furnishing and applying of water proofing cement paint of approved make of snowcem plus or equivalent with requisite priming & two or more coat for even shade of paint of approved colour & shade as desired by the Engineer including cleaning, preparing surface, curing, scaffolding, staging etc. complete for all heights & depths. sqm 15000 3000 14.02 (c) Procuring, furnishing and applying of approved make or brand of synthetic enamel paint in Steel work of two or more coats for even shade including surface preparation, cleaning etc. complete with one coat of Red oxide Zinc chromate primer, including staging, scaffolding etc. complete for all heights & depths kg 2400 2000 SUB TOTAL BILL NO. 14 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 28/40 BILL NO. 15 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount 15.0 WATER PROOFING 15.01 Procuring, furnishing and laying over roofs, 7 layer waterproofing treatment, underlayer consisting of C-5 concrete of minimum 50 mm thickness laid to necessary slope, the layers consisting of primer and three alternate layers each of hot cut bitumen @ 1.2 kg/sqm and hessian/ polyster based self finished felt overlain with 45 mm thick cement mortar layer in ratio 1:4,marked off into 600 mm squares and providing expansion joint @ 3 m c/c etc complete, as per specifications. sqm 4000 1800 15.02 Procuring, furnishing & applying of water proofing treatment to vertical and horizontal surfaces of depressed portion of WC, kitchen and like the consisting of as below at all elevations. (a) With a coat of cement slurry @4.4 kg/sqm mixed with water proofing compound liquid integral type polyurethane or equivalent in 2nd course with 20mm cement plaster (1 part of cement : 3 part of course sand) mixed with recommended water proofing compound as per manufactures proportion and then a course of residual or blown bitumen applied hot @ 1.70 kg/sqm and in final layer 400 micron PVC sheet with overlapping of 150mm (wherever required) and painted over bitumen layer neatly all heights & depths including preparation of surface treatment, sealing of all joints, junction of pipes and masonry with approved polymer mix slurry including curing etc. complete. sqm 300 300 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 29/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount 15.03 Procuring, furnishing and fixing of nozzles at 1.00 sqm to 1.5 sqm grid (as specified by the manufacturer) Mild Steel/GI grouting nozzles of 20mm dia on concrete surface by making holes 40mm deep & 40mm to 50mm dia and the drilling by approved method and grouting the same and left it for Min. 24 hrs. for setting with the surface and then injecting cement slurry mixed with water soluble polymer based water proofing compound by using low pressure grout pumps till the nozzles refuse to take any further slurry even on inverting the pressure including removing the nozzles after 24 hrs. and making good the holes with 1:2 cement mortar etc. complete in all respect including staging, scaffolding etc. complete for all heights & depths (only area of surface to be measured) sqm 1400 500 15.04 Procuring, furnishing and making of concrete gola 75mmX 75mm with concrete grade c-20 class- I with 10mm down stone aggregate including finishing with cement mortar of 1:3 mix with Integral cement based water proofing compound curing etc complete in all respect. m 1000 900 15.05 Procuring, furnishing and making of Khurras 450mmX450mm with average minimum thickness of 50mm cement concrete 1:2:4 (1 part of cement: 2part of coarse sand: 4 part of aggregate 10mmdown) over PVC Sheet of 1000mm X 400 micron, finished with 12 mm cement mortor1:3 and a coat of neat cement rounding the edges and making and finishing the outlet complete in all respect. each 15 10 SUB TOTAL BILL NO. 15 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 30/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount BILL NUMBER 16 16.0 SANITARY AND WATER SUPPLY 16.01 (a) Procuring, furnishing, laying and fixing of heavy class (Grade 'C') galvanised Mild Steel pipes for internal work including all clamps and fittings such as tees, bends, elbows, couples, flanges, plug ends and damps including chase cutting and making good the wall / floor (brick or concrete) with protective coating of paint and other like polythene coating etc. for pipes testing etc. complete in all respect including connecting with the storage tanks. (I) 15mm dia NB m 300 200 (ii) 20mm dia NB m 200 150 16.01 (b) Same as Item No. 16.01 (a) but for external work including excavation, bed concrete, refilling and making good the area clear etc. complete including connecting with the storage tank (i) 25mm dia NB m 250 100 (ii) 32mm dia NB m 300 75 (iii) 50mm dia NB m 250 200 16.02 (a) Procuring furnishing and fixing of C.P. Brass bid cocks approved make and quality including CP connection nipple as approved & directed by Engineer (I) 15mm dia NB (Ordinary) each 25 20 (ii) 15mm dia NB ( Long body) each 20 8 16.02 (b) Procuring furnishing and fixing of C.P. Brass stop cocks (open or concealed) approved make and quality including CP connection nipple as approved & directed by Engineer (I) 15mm dia NB each 105 (ii) 20mm dia NB each 16.02 (c) Procuring furnishing and fixing of Gun metal full way Gate valves with wheel approved make and quality including CP connection nipple as approved & directed by Engineer. (I) 20mm dia NB each 10 10 (ii) 25mm dia NB each 10 10 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 31/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount (iii) 32mm dia NB each 5 5 (iv) 50mm dia NB each 5 5 16.02 (d) Procuring furnishing and fixing of C.P. Brass sink mixer (casted over spout / Non-telephonic type) each 6 5 16.03 Procuring, furnishing, transporting and fixing of best quality white vitreous china water closet with "P" or "S" trap of approved make or as approved & directed by Engineer including flushing cistern of 12.5 lit capacity, measuring chromium plated distribution pipe branches, stop cock, connection up to downtake pipe on external wall and making good chases, holes & floors etc. complete in all respect. (I) For Indian type W.C. all set in clean sand and also filling around the closet including a pair of foot rest each 10 5 (ii) For European type water closet including seat and seat cover. each 10 5 16.04 Procuring, furnishing, transporting and fixing of best quality white vitreous china flat back half stall type urinal minimum size 580m x 380m x 350m with approved make and as approved & directed by Engineer with approved automatic flushing cistern, necessary chromium plated distribution pipes branches, CP brass spreader, traps and waste pipe 32 dia up to trap, CP brass heavy duty stop cock / Angular cock and bottle trap including cutting, making good the wall and floor where required etc. completed in all respect. (I) Single Stall urinal with 5 lit capacity auto flush cistern each 5 3 (ii) Range of two stall urinal with 5 lit capacity auto flush cistern each 5 5 (iii) Range of three stall urinal with 10 lit capacity auto flush cistern each 4 3 (iv) Range of four stall urinal with 10 lit capacity auto flush cistern each 2 2 16.04 (a) Discount for not providing of cisterns (I) 5 lit capacity cisterns each (ii) 10 lit capacity cisterns each TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 32/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount 16.05 Procuring, furnishing, placing in position & fixing of best quality white glazed wash basin of approved make and as approved / directed by Engineer of 580m x 450m min. size including painted CI brackets screwed to wall with raw plug, bolts, screws, 2 nos. 15mm CP brass heavy duty Pillar tap, CP brass heavy duty stop cocks / Angular cock, 32mm CP waste complete with CP bottle trap, CP pipe up to wall / floor and 40mm lead waste pipe embedded in wall / floor from 32mm CP waste extension pipe to the CI waste shaft on the outside wall complete with brass unions with necessary cleaning eyes, 'P' or 'S' trap including making chase & hole and making good of the same etc. complete. each 5 16.05 (a) Extra over Item No. 16.05 but for providing & fixing of Pedestal of even shade. each 5 2 16.06 Procuring, furnishing, placing in posting and fixing stainless steel kitchen sink of approved make or as approved / directed by Engineer with pointed CI bracket size of sink 510 x 1040 x 178 with drain board including one No. sink mixer swivel type including necessary CP waste pipe, trap, bottle trap concealed / angular stop cock etc. complete in all respect. each 3 2 16.07 Procuring, furnishing, placing & fixing of 20mm dia Towel rail of approved make or as approved / directed by Engineer 750mm long screwed to wall with rawl plug CP brass screws etc. complete (i) Chromium plated brass heavy duty Towel rail each 5 5 16.08 Procuring, furnishing, placing in position & fixing of liquid soap dispenser of 109m wide & 125m high of stand and shape with bracket of the same material screwed to wall with rawl plug and CP brass screws etc. complete as approved / directed by Engineer. (i) Chromium plated heavy duty each 5 5 16.09 Procuring, furnishing, placing, positioning & fixing of 600 x 450m of bevelled edge Belgium or equivalent quality mirror of approved make or as approved / directed by Engineer with 6m thick backing and pre- drilled holes, fixed to rawl & plug with CP brass dome headed screws etc. complete TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 33/40 (i) Backing with backlit / sheet each 5 5 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount 16.1 Procuring, furnishing, placing in position & fixing of glazed vitreous china clay CP heavy duty brass accessories of size 150mm x150mm complete including fixing with white cement or even shade as approved by Engineer. (I) Toilet paper holder each 5 4 (ii) Soap Disk / Tray each 5 4 (iii) Towel ring 150 dia each 5 3 SUB TOTAL BILL NUMBER 16 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 34/40 BILL NUMBER 17 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount 17.0 SEWERAGE AND DRAINAGE (i) 100mm nominal dia m 150 150 17.02 Procuring, furnishing, laying in posting and fixing of C.I. Floor trap with hinged grating, fixed in cement concrete, connecting to C.I. Pipe/bend with lead joints perfectly air & water tight including necessary cutting holes, chipping of floor and making good of the same etc. complete (a) Floor trap (i) 100mm nominal dia & 200 dia C.P. grating each 20 20 17.03 Procuring, furnishing, finishing & placing in position of stoneware glazed pipes laying in required slope, jointing with stiff mixture of cement mortar 1:1 (1 part of cement : 1 part of course sand) including bedding and encasing of pipe as per specification but excluding of excavation (I) 100mm nominal dia confirming to grade A m (ii) 150mm nominal dia confirming to grade A m (iii) 230mm nominal dia confirming to grade A m 17.01 Procuring, furnishing, laying in position and fixing of C.I. Soil, waste and vent pipe including necessary testing outside wall / columns including necessary bend, tees, sets of junctions, cowl, shoes etc complete, with lead joints perfectly air and water tight including necessary scaffolding and two coat of white zinc based paint of approved quality over a coat of red oxide primer with necessary inspection eyes, chipping or chase cutting in floor, wall and making good with necessary bedding & encasing by grade C-15 Class-II around the pipe, clamping in vertical surface etc. complete TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 35/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount 17.04 Procuring, furnishing, placing in position and laying of R.C.C. Hume pipe (ASTM C 76 or C 118) confirming to EBCS-2 and laid on bed concrete as per grade C-15 Class-II including jointing the pipes with cement slurry & stiff mixture of cement mortar in 1:2 (1 part of cement : 2 part of course sand) including its testing etc. complete (Earthwork & encasing of concrete only paid separately) (i) 300mm nominal dia m 300 100 75 (iii) 1000mm nominal dia m 200 17.05 Procuring, furnishing, fixing in position, jointing, cutting, bending etc. for unplasticised, PVC pipe working pressure (up to 6 kg/cm2) confirming to AASHTO M-278 for rain water pipes and all necessary fitting / accessories, shoes, bends, collars etc including CI grating complete including bedding & encasing wherever required. (iii) 150mm nominal dia m 500 300 17.06 Procuring, furnishing, making & fixing of stone ware glazed gully trap with C.I. Grating of 300mm x 300mm (inside size) hinged frame & cover including 300mm x 300mm (inside size) of brick masonry chamber with 230mm thick wall in cement plaster of mortar 1:4 (1 part of cement : 4 part of course sand) at outside and cement 1:3 (1 part of cement : 3 part of course sand) at inside including 150mm thick grade C-15 Class-II cement concrete bedding and filling in between chamber wall & gully trap, excavation, backfilling etc. complete in all respect. each 10 5 17.07 Procuring, furnishing, placing and fixing of heavy duty PVC water tank of approved make and quality, including all connections, like inlet, outlet, vent pipe etc. complete with all fittings and valves with raised platform made with brick work etc. complete at all heights & depths. (a) Per Lit capacity Lit 5000 3000 SUB TOTAL BILL NUMBER 17 (ii) 600mm nominal dia m 200 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 36/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount BILL NUMBER 18 18.0 MISCELLANEOUS WORK 18.01 Dismantling of the following Item of any section, size & shape including finishing, grinding etc. the left over jobs wherever required, stacking the debris and disposal it after a initial lead of 500t as directed by Engineer etc. complete including by taking of every safety precaution. (I) Plain cement concrete of any grade cum 50 50 (ii) Re-enforced cement concrete of any grade cum 100 100 (iii) Concrete block masonary of any ratio of cement mortar with or without making ratio. cum 50 (iv) Re-enforcement steel / structural steel of any section kg 5000 3000 18.02 Procuring, Furnishing, transporting, Laying Curing etc all complete for grouting works in pockets, holes, machine bases, pipe sleeves of any size and shape etc including roughening the surface, cleaning with compressed air/water jets, ramming, curing etc complete in all respect with the following materials 18.03 (i) Stiff mix grout with cement mortar 1:3 with water cement ratio not more than 0.53 (For grout thickness more than 50 mm) cum 400 400 18.03 (ii) Approved quality of non-shrink grout as per manufacturer specification for any Grout thickness cum 100 50 18.04 Procuring, Furnishing, transporting, mixing, laying and placing in position of cement concrete grade C-25 class-I for Encasing the rolled steel sections in beams, columns etc including all but excluding the cost of formwork and reinforcing work (Formwork & reinforcing work will be paid in their respective items) cum 200 150 18.05 Extra over item 18.06 but for fixing expanded metal wire mesh of size 20mmX 60mm and strands 3.25mm wide 1.6mm thick weighing 3.64 Kg per sqm including cost of hangers. sqm 900 500
TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 37/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount 18.06 Procuring, furnishing, transporting, laying and fixing in appropriate manner 230m Wide and 10mm thick P V C centrally bulb water stop in concrete as drawing and as Directed by Engineer. m 1500 350 18.07 1.20mtr. high fencing with 1.8mtr. angle 50x50x6 posts placed every 3.0mtr. center to center embedded in cement concrete blocks every 15 th post last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontally line and two diagonals inter woven with horizontally wires of barbed wire 9.38 kg/per 100mtr. (Minimum) between the two posts filled and fixed with G.I. staples turn buckets etc. complete. (a) With G.I. barbed wire mtr. 1000 (b) M.I.S barbed wire mtr. 1000 (i) 12 mm dia 150 mm long No. 150 150 (ii) 16 mm dia 150 mm long No. 150 150 (iii) 20 mm dia 200 mm long No. 150 150 18.09 Procuring furnishing transporting and fixing 3mtr. High chain link fencing with main posts made of M.S angle 65x65x6 spaced 2.50 mtr. center to center with top 300mm of Y shape with 4 rows of barbed wire on each using the straight portion of post ti be stiffened with diagonal stay posts and covered with chain link fabric of P.V.C coated with 3.15 mm galvanised wire at 75 mm square mash fixed as per standards detail etc. complete. mtr 400 18.1 Procuring furnishing transporting and fixing 150 mm thick layer grand broken stones consisting of 75 mm thick bottom layer of 20 mm size compacted with tonne roller, overlain by 75 mm thick layer of 400 mm size watered and compacted. sqm 3800 18.08 Procuring furnishing transporting and fixing anchor fastener: - Imeluding drilling in RCC work at any height. TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 38/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount 18.11 Procuring furnishing transporting and carrying out anti-weed treatment of switch yard area as per approved chemical and manufactures specifications ctc. Complete. sqm 4000 18.12 Chipping concrete surface C all graded up to 50 to 75 mm depth for exposing reinforcement. sqm 100 100 18.13 Chase cutting in concrete block wall at all level and heights including cost of scaffolding etc. required to complete the work and disposal of debris out side the plant boundaries. 1. (a) Size 40x40 Rm 100 100 (b) Size 75x75 Rm 100 100 (c) Size 115x115 Rm 50 50 (d) Size 230x230 Rm 20 20 2 Same as above in RCC. (a) Size 40x40 Rm 50 40 (b) 75x75 Rm 30 20 SUB TOTAL BILL NUMBER 18 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 39/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount BILL NUMBER 19 19.0 ROAD WORK 19.01 Preparing of sub-grade by excavating earth required depth, dressing to chamber and consolidated with 10 ton Road roller to comply with 95% of proctor density wearing to optimum moisture content and also making good the undulation etc. and disposal of surplus earth upto a lead 500m as per specification. sqm 60000 19.02 Procuring, furnishing and laying of 2 layers of150mm thick each, hand packed boulder soling with stone size 50mm to 100mm on levelled & compacted earth and filling the voids with crushed stone aggregate and course sand etc. as per specification and directed by Engineer and also consolidation with 8-10 ton capacity road roller etc. all complete (measurement to be taken for 150mm compacted thickness for each only.) cum 16000 19.03 Procuring, furnishing and laying with specified stone aggregate screening and blinding material including screening, sorting, spreading to template and consolidated with power road roller of 10t capacity compacted 98% of modified AASHTO density with slushing, corrected the layers etc. complete in all respect for macadam base course. (I) With stone aggregate 90mm to 45mm including stone screening 13.25mm size and binding material with red earth spreading and compact in 200m thick in 2 layer sqm 52200 19.04 Procuring, furnishing, aligning, fixing in line & level of kerb stone in precast concrete of grade C-20 Class-I of Min. size of 300m in length, 200m in wide and 300m in high chisel dressed on top and side including fixing in cement mortar of 1:3 (1 part of cement & 3 part of course sand) including making drainage opening, curve etc. (where required) as per drawing or as directed by Engineer. m 13500 19.05 Procuring, furnishing, mixing and laying of cement concrete in 200 mm thick pavement with C-25 grade Class-I of concrete including finishing the same as per specification or as directed by Engineer including making panels, curing etc. complete in all respect. cum 10500 TSFP BILL OF QUANTITIES BID DOCUMENT FOR CIVIL WORKS FOR FOUNDATIONS OF EQUIPMENT AND PLANT BUILDINGS Section-V-Sub-Section-V.3 Page - 40/40 Item No. Description of Item Unit Quantity for Phase 1 Rate Numerical and in Words Amount Quantity for Phase 2 Rate Numerical and in Words Amount 19.06 (a) Same as Item No. 19.06 but extra for using the procedure of vacuum dewatering method by finishing with power trowel and power disc complete as per specification. sqm 52200 19.07 Cutting of 8mm wide and 20m deep (finished) grooves in pavement with diamond shape as pattern and filling with polysulphite of approved make and as per direction of manufacturer specification or as directed by Engineer. m 10000 19.08 Procuring, furnishing, transporting, fixing and aligning of the following fencing including clamping & tightening of the same with the relevant clip system etc. complete (Mild Steel Post will be measured in respective Item No. 9.0) (a) Barbed wire fencing (conform to 9.38 kg/100m m 1000 (c) Concertina Coil m 500 Sub Total Bill no 19