0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
26 visualizzazioni56 pagine
Login to client 100 or (any client) and activate applications in client. Activate SICF Services: Execute SICF T-code:SCPR20 or Goto SPROGRC Activate bellow GRC, GRAC BC stes. Create RFC connection from GRC to ERP (Ex: 100 client to 200 client) and test the connection. Maintain connectors and connection Types: Select connector group and double click on Assign connector to connector Types.
Login to client 100 or (any client) and activate applications in client. Activate SICF Services: Execute SICF T-code:SCPR20 or Goto SPROGRC Activate bellow GRC, GRAC BC stes. Create RFC connection from GRC to ERP (Ex: 100 client to 200 client) and test the connection. Maintain connectors and connection Types: Select connector group and double click on Assign connector to connector Types.
Login to client 100 or (any client) and activate applications in client. Activate SICF Services: Execute SICF T-code:SCPR20 or Goto SPROGRC Activate bellow GRC, GRAC BC stes. Create RFC connection from GRC to ERP (Ex: 100 client to 200 client) and test the connection. Maintain connectors and connection Types: Select connector group and double click on Assign connector to connector Types.
Right click on Default _hosts and select activate.
Activate BC Sets for Access control: (T-code:SCPR20 or Goto SPROGRC
Activate bellow *GRC*,*GRAC* BC stes. Note: If you implement PCand RM you need to activate related that BC sets
Note: Select only expert mode and Do not overwrite default values.
Then click on continue. (If you get warnings that are acceptable.)
Connectors Steps: Step1: Create RFC connection from GRC to ERP (Ex: 100 client to 200 client) and test the connection. Through SM59 or with bellow path create connector(Execute SPRO-GRC-CCS-IF)
Step2: Maintain connectors and connection Types.
Note: Target connector and logical port should be same.
Create Subsequent connector:Select connector and double click on subsequent connector, then new entries.
Note: Target connector and logical port should be same.
Define Group: select subsequent connector and double click on Define connector Group then click on new entries.
Assign connector to connector Types: Select connector group and double click on Assign connector to connector Types.
Then click on new entries.
Select logical group.
Assign connectors to connectors groups: Select logical group and double click on Assign connectors to connectors groups.
Maintain Connection Settings:
SPROGRC--CCS-IF-- Maintain Connection Settings
Select Auth-Double click on Scenario connection type link--select SAP connection Type and double click on Scenario connector link .
New entries----.
Repeat same process as AUTH for PROV, ROLMG, SUPMG